Commit | Line | Data |
---|---|---|
6aba47ca | 1 | # Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
0fb0cc75 | 2 | # 2003, 2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc. |
c906108c SS |
3 | |
4 | # This program is free software; you can redistribute it and/or modify | |
5 | # it under the terms of the GNU General Public License as published by | |
e22f8b7c | 6 | # the Free Software Foundation; either version 3 of the License, or |
c906108c | 7 | # (at your option) any later version. |
e22f8b7c | 8 | # |
c906108c SS |
9 | # This program is distributed in the hope that it will be useful, |
10 | # but WITHOUT ANY WARRANTY; without even the implied warranty of | |
11 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
12 | # GNU General Public License for more details. | |
e22f8b7c | 13 | # |
c906108c | 14 | # You should have received a copy of the GNU General Public License |
e22f8b7c | 15 | # along with this program. If not, see <http://www.gnu.org/licenses/>. |
c906108c | 16 | |
c906108c SS |
17 | # This file was written by Fred Fish. (fnf@cygnus.com) |
18 | ||
19 | # Generic gdb subroutines that should work for any target. If these | |
20 | # need to be modified for any target, it can be done with a variable | |
21 | # or by passing arguments. | |
22 | ||
97c3f1f3 JK |
23 | if {$tool == ""} { |
24 | # Tests would fail, logs on get_compiler_info() would be missing. | |
25 | send_error "`site.exp' not found, run `make site.exp'!\n" | |
26 | exit 2 | |
27 | } | |
28 | ||
c906108c SS |
29 | load_lib libgloss.exp |
30 | ||
31 | global GDB | |
c906108c SS |
32 | |
33 | if [info exists TOOL_EXECUTABLE] { | |
34 | set GDB $TOOL_EXECUTABLE; | |
35 | } | |
36 | if ![info exists GDB] { | |
37 | if ![is_remote host] { | |
38 | set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]] | |
39 | } else { | |
40 | set GDB [transform gdb]; | |
41 | } | |
42 | } | |
43 | verbose "using GDB = $GDB" 2 | |
44 | ||
6b8ce727 DE |
45 | # GDBFLAGS is available for the user to set on the command line. |
46 | # E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble | |
47 | # Testcases may use it to add additional flags, but they must: | |
48 | # - append new flags, not overwrite | |
49 | # - restore the original value when done | |
c906108c SS |
50 | global GDBFLAGS |
51 | if ![info exists GDBFLAGS] { | |
6b8ce727 | 52 | set GDBFLAGS "" |
c906108c SS |
53 | } |
54 | verbose "using GDBFLAGS = $GDBFLAGS" 2 | |
55 | ||
6b8ce727 DE |
56 | # INTERNAL_GDBFLAGS contains flags that the testsuite requires. |
57 | set INTERNAL_GDBFLAGS "-nw -nx" | |
58 | ||
9e0b60a8 JM |
59 | # The variable gdb_prompt is a regexp which matches the gdb prompt. |
60 | # Set it if it is not already set. | |
c906108c | 61 | global gdb_prompt |
9e0b60a8 | 62 | if ![info exists gdb_prompt] then { |
c906108c SS |
63 | set gdb_prompt "\[(\]gdb\[)\]" |
64 | } | |
65 | ||
6006a3a1 BR |
66 | # The variable fullname_syntax_POSIX is a regexp which matches a POSIX |
67 | # absolute path ie. /foo/ | |
d0b76dc6 | 68 | set fullname_syntax_POSIX {/[^\n]*/} |
6006a3a1 BR |
69 | # The variable fullname_syntax_UNC is a regexp which matches a Windows |
70 | # UNC path ie. \\D\foo\ | |
d0b76dc6 | 71 | set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\} |
6006a3a1 BR |
72 | # The variable fullname_syntax_DOS_CASE is a regexp which matches a |
73 | # particular DOS case that GDB most likely will output | |
74 | # ie. \foo\, but don't match \\.*\ | |
d0b76dc6 | 75 | set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\} |
6006a3a1 BR |
76 | # The variable fullname_syntax_DOS is a regexp which matches a DOS path |
77 | # ie. a:\foo\ && a:foo\ | |
d0b76dc6 | 78 | set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\} |
6006a3a1 BR |
79 | # The variable fullname_syntax is a regexp which matches what GDB considers |
80 | # an absolute path. It is currently debatable if the Windows style paths | |
81 | # d:foo and \abc should be considered valid as an absolute path. | |
82 | # Also, the purpse of this regexp is not to recognize a well formed | |
83 | # absolute path, but to say with certainty that a path is absolute. | |
84 | set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)" | |
85 | ||
93076499 ND |
86 | # Needed for some tests under Cygwin. |
87 | global EXEEXT | |
88 | global env | |
89 | ||
90 | if ![info exists env(EXEEXT)] { | |
91 | set EXEEXT "" | |
92 | } else { | |
93 | set EXEEXT $env(EXEEXT) | |
94 | } | |
95 | ||
bb2bed55 NR |
96 | set octal "\[0-7\]+" |
97 | ||
085dd6e6 JM |
98 | ### Only procedures should come after this point. |
99 | ||
c906108c SS |
100 | # |
101 | # gdb_version -- extract and print the version number of GDB | |
102 | # | |
103 | proc default_gdb_version {} { | |
104 | global GDB | |
6b8ce727 | 105 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c SS |
106 | global gdb_prompt |
107 | set fileid [open "gdb_cmd" w]; | |
108 | puts $fileid "q"; | |
109 | close $fileid; | |
110 | set cmdfile [remote_download host "gdb_cmd"]; | |
6b8ce727 | 111 | set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --command $cmdfile"] |
c906108c SS |
112 | remote_file build delete "gdb_cmd"; |
113 | remote_file host delete "$cmdfile"; | |
114 | set tmp [lindex $output 1]; | |
115 | set version "" | |
116 | regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version | |
117 | if ![is_remote host] { | |
6b8ce727 | 118 | clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c | 119 | } else { |
6b8ce727 | 120 | clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
c906108c SS |
121 | } |
122 | } | |
123 | ||
124 | proc gdb_version { } { | |
125 | return [default_gdb_version]; | |
126 | } | |
127 | ||
128 | # | |
129 | # gdb_unload -- unload a file if one is loaded | |
130 | # | |
131 | ||
132 | proc gdb_unload {} { | |
133 | global verbose | |
134 | global GDB | |
135 | global gdb_prompt | |
136 | send_gdb "file\n" | |
137 | gdb_expect 60 { | |
138 | -re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
139 | -re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue } | |
140 | -re "A program is being debugged already..*Kill it.*y or n. $"\ | |
141 | { send_gdb "y\n" | |
142 | verbose "\t\tKilling previous program being debugged" | |
143 | exp_continue | |
144 | } | |
145 | -re "Discard symbol table from .*y or n.*$" { | |
146 | send_gdb "y\n" | |
147 | exp_continue | |
148 | } | |
149 | -re "$gdb_prompt $" {} | |
150 | timeout { | |
151 | perror "couldn't unload file in $GDB (timed out)." | |
152 | return -1 | |
153 | } | |
154 | } | |
155 | } | |
156 | ||
157 | # Many of the tests depend on setting breakpoints at various places and | |
158 | # running until that breakpoint is reached. At times, we want to start | |
159 | # with a clean-slate with respect to breakpoints, so this utility proc | |
160 | # lets us do this without duplicating this code everywhere. | |
161 | # | |
162 | ||
163 | proc delete_breakpoints {} { | |
164 | global gdb_prompt | |
165 | ||
a0b3c4fd JM |
166 | # we need a larger timeout value here or this thing just confuses |
167 | # itself. May need a better implementation if possible. - guo | |
168 | # | |
c906108c | 169 | send_gdb "delete breakpoints\n" |
a0b3c4fd | 170 | gdb_expect 100 { |
c906108c SS |
171 | -re "Delete all breakpoints.*y or n.*$" { |
172 | send_gdb "y\n"; | |
173 | exp_continue | |
174 | } | |
175 | -re "$gdb_prompt $" { # This happens if there were no breakpoints | |
176 | } | |
177 | timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return } | |
178 | } | |
179 | send_gdb "info breakpoints\n" | |
a0b3c4fd | 180 | gdb_expect 100 { |
c906108c SS |
181 | -re "No breakpoints or watchpoints..*$gdb_prompt $" {} |
182 | -re "$gdb_prompt $" { perror "breakpoints not deleted" ; return } | |
183 | -re "Delete all breakpoints.*or n.*$" { | |
184 | send_gdb "y\n"; | |
185 | exp_continue | |
186 | } | |
187 | timeout { perror "info breakpoints (timeout)" ; return } | |
188 | } | |
189 | } | |
190 | ||
191 | ||
192 | # | |
193 | # Generic run command. | |
194 | # | |
195 | # The second pattern below matches up to the first newline *only*. | |
196 | # Using ``.*$'' could swallow up output that we attempt to match | |
197 | # elsewhere. | |
198 | # | |
199 | proc gdb_run_cmd {args} { | |
200 | global gdb_prompt | |
201 | ||
202 | if [target_info exists gdb_init_command] { | |
203 | send_gdb "[target_info gdb_init_command]\n"; | |
204 | gdb_expect 30 { | |
205 | -re "$gdb_prompt $" { } | |
206 | default { | |
207 | perror "gdb_init_command for target failed"; | |
208 | return; | |
209 | } | |
210 | } | |
211 | } | |
212 | ||
213 | if [target_info exists use_gdb_stub] { | |
214 | if [target_info exists gdb,do_reload_on_run] { | |
b741e217 | 215 | if { [gdb_reload] != 0 } { |
917317f4 JM |
216 | return; |
217 | } | |
c906108c SS |
218 | send_gdb "continue\n"; |
219 | gdb_expect 60 { | |
220 | -re "Continu\[^\r\n\]*\[\r\n\]" {} | |
221 | default {} | |
222 | } | |
223 | return; | |
224 | } | |
225 | ||
226 | if [target_info exists gdb,start_symbol] { | |
227 | set start [target_info gdb,start_symbol]; | |
228 | } else { | |
229 | set start "start"; | |
230 | } | |
231 | send_gdb "jump *$start\n" | |
917317f4 JM |
232 | set start_attempt 1; |
233 | while { $start_attempt } { | |
234 | # Cap (re)start attempts at three to ensure that this loop | |
235 | # always eventually fails. Don't worry about trying to be | |
236 | # clever and not send a command when it has failed. | |
237 | if [expr $start_attempt > 3] { | |
238 | perror "Jump to start() failed (retry count exceeded)"; | |
c906108c SS |
239 | return; |
240 | } | |
917317f4 JM |
241 | set start_attempt [expr $start_attempt + 1]; |
242 | gdb_expect 30 { | |
243 | -re "Continuing at \[^\r\n\]*\[\r\n\]" { | |
244 | set start_attempt 0; | |
245 | } | |
246 | -re "No symbol \"_start\" in current.*$gdb_prompt $" { | |
247 | perror "Can't find start symbol to run in gdb_run"; | |
248 | return; | |
249 | } | |
250 | -re "No symbol \"start\" in current.*$gdb_prompt $" { | |
251 | send_gdb "jump *_start\n"; | |
252 | } | |
253 | -re "No symbol.*context.*$gdb_prompt $" { | |
254 | set start_attempt 0; | |
255 | } | |
256 | -re "Line.* Jump anyway.*y or n. $" { | |
257 | send_gdb "y\n" | |
258 | } | |
259 | -re "The program is not being run.*$gdb_prompt $" { | |
b741e217 | 260 | if { [gdb_reload] != 0 } { |
917317f4 JM |
261 | return; |
262 | } | |
263 | send_gdb "jump *$start\n"; | |
264 | } | |
265 | timeout { | |
266 | perror "Jump to start() failed (timeout)"; | |
267 | return | |
268 | } | |
c906108c | 269 | } |
c906108c SS |
270 | } |
271 | if [target_info exists gdb_stub] { | |
272 | gdb_expect 60 { | |
273 | -re "$gdb_prompt $" { | |
274 | send_gdb "continue\n" | |
275 | } | |
276 | } | |
277 | } | |
278 | return | |
279 | } | |
83f66e8f DJ |
280 | |
281 | if [target_info exists gdb,do_reload_on_run] { | |
b741e217 | 282 | if { [gdb_reload] != 0 } { |
83f66e8f DJ |
283 | return; |
284 | } | |
285 | } | |
c906108c SS |
286 | send_gdb "run $args\n" |
287 | # This doesn't work quite right yet. | |
5aa7ddc2 PM |
288 | # Use -notransfer here so that test cases (like chng-sym.exp) |
289 | # may test for additional start-up messages. | |
290 | gdb_expect 60 { | |
c906108c SS |
291 | -re "The program .* has been started already.*y or n. $" { |
292 | send_gdb "y\n" | |
293 | exp_continue | |
294 | } | |
bbb88ebf | 295 | -notransfer -re "Starting program: \[^\r\n\]*" {} |
c906108c SS |
296 | } |
297 | } | |
298 | ||
b741e217 DJ |
299 | # Generic start command. Return 0 if we could start the program, -1 |
300 | # if we could not. | |
301 | ||
302 | proc gdb_start_cmd {args} { | |
303 | global gdb_prompt | |
304 | ||
305 | if [target_info exists gdb_init_command] { | |
306 | send_gdb "[target_info gdb_init_command]\n"; | |
307 | gdb_expect 30 { | |
308 | -re "$gdb_prompt $" { } | |
309 | default { | |
310 | perror "gdb_init_command for target failed"; | |
311 | return; | |
312 | } | |
313 | } | |
314 | } | |
315 | ||
316 | if [target_info exists use_gdb_stub] { | |
317 | return -1 | |
318 | } | |
319 | ||
320 | send_gdb "start $args\n" | |
321 | gdb_expect 60 { | |
322 | -re "The program .* has been started already.*y or n. $" { | |
323 | send_gdb "y\n" | |
324 | exp_continue | |
325 | } | |
326 | # Use -notransfer here so that test cases (like chng-sym.exp) | |
327 | # may test for additional start-up messages. | |
328 | -notransfer -re "Starting program: \[^\r\n\]*" { | |
329 | return 0 | |
330 | } | |
331 | } | |
332 | return -1 | |
333 | } | |
334 | ||
78a1a894 | 335 | # Set a breakpoint at FUNCTION. If there is an additional argument it is |
55cd6f92 DJ |
336 | # a list of options; the supported options are allow-pending, temporary, |
337 | # and no-message. | |
78a1a894 DJ |
338 | |
339 | proc gdb_breakpoint { function args } { | |
c906108c SS |
340 | global gdb_prompt |
341 | global decimal | |
342 | ||
78a1a894 DJ |
343 | set pending_response n |
344 | if {[lsearch -exact [lindex $args 0] allow-pending] != -1} { | |
345 | set pending_response y | |
346 | } | |
347 | ||
e48883f7 | 348 | set break_command "break" |
18ac113b | 349 | set break_message "Breakpoint" |
e48883f7 DJ |
350 | if {[lsearch -exact [lindex $args 0] temporary] != -1} { |
351 | set break_command "tbreak" | |
18ac113b | 352 | set break_message "Temporary breakpoint" |
e48883f7 DJ |
353 | } |
354 | ||
55cd6f92 DJ |
355 | set no_message 0 |
356 | if {[lsearch -exact [lindex $args 0] no-message] != -1} { | |
357 | set no_message 1 | |
358 | } | |
359 | ||
e48883f7 | 360 | send_gdb "$break_command $function\n" |
c906108c SS |
361 | # The first two regexps are what we get with -g, the third is without -g. |
362 | gdb_expect 30 { | |
18ac113b AR |
363 | -re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {} |
364 | -re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {} | |
365 | -re "$break_message \[0-9\]* at .*$gdb_prompt $" {} | |
366 | -re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" { | |
78a1a894 | 367 | if {$pending_response == "n"} { |
55cd6f92 DJ |
368 | if { $no_message == 0 } { |
369 | fail "setting breakpoint at $function" | |
370 | } | |
78a1a894 DJ |
371 | return 0 |
372 | } | |
373 | } | |
9f27c604 | 374 | -re "Make breakpoint pending.*y or \\\[n\\\]. $" { |
78a1a894 | 375 | send_gdb "$pending_response\n" |
14b1a056 | 376 | exp_continue |
18fe2033 | 377 | } |
55cd6f92 DJ |
378 | -re "$gdb_prompt $" { |
379 | if { $no_message == 0 } { | |
380 | fail "setting breakpoint at $function" | |
381 | } | |
382 | return 0 | |
383 | } | |
384 | timeout { | |
385 | if { $no_message == 0 } { | |
386 | fail "setting breakpoint at $function (timeout)" | |
387 | } | |
388 | return 0 | |
389 | } | |
c906108c SS |
390 | } |
391 | return 1; | |
392 | } | |
393 | ||
394 | # Set breakpoint at function and run gdb until it breaks there. | |
395 | # Since this is the only breakpoint that will be set, if it stops | |
396 | # at a breakpoint, we will assume it is the one we want. We can't | |
397 | # just compare to "function" because it might be a fully qualified, | |
78a1a894 DJ |
398 | # single quoted C++ function specifier. If there's an additional argument, |
399 | # pass it to gdb_breakpoint. | |
c906108c | 400 | |
78a1a894 | 401 | proc runto { function args } { |
c906108c SS |
402 | global gdb_prompt |
403 | global decimal | |
404 | ||
405 | delete_breakpoints | |
406 | ||
78a1a894 | 407 | if ![gdb_breakpoint $function [lindex $args 0]] { |
c906108c SS |
408 | return 0; |
409 | } | |
410 | ||
411 | gdb_run_cmd | |
412 | ||
413 | # the "at foo.c:36" output we get with -g. | |
414 | # the "in func" output we get without -g. | |
415 | gdb_expect 30 { | |
416 | -re "Break.* at .*:$decimal.*$gdb_prompt $" { | |
417 | return 1 | |
418 | } | |
419 | -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { | |
420 | return 1 | |
421 | } | |
422 | -re "$gdb_prompt $" { | |
423 | fail "running to $function in runto" | |
424 | return 0 | |
425 | } | |
72c63395 JK |
426 | eof { |
427 | fail "running to $function in runto (end of file)" | |
428 | return 0 | |
429 | } | |
c906108c SS |
430 | timeout { |
431 | fail "running to $function in runto (timeout)" | |
432 | return 0 | |
433 | } | |
434 | } | |
435 | return 1 | |
436 | } | |
437 | ||
438 | # | |
439 | # runto_main -- ask gdb to run until we hit a breakpoint at main. | |
440 | # The case where the target uses stubs has to be handled | |
441 | # specially--if it uses stubs, assuming we hit | |
442 | # breakpoint() and just step out of the function. | |
443 | # | |
444 | proc runto_main { } { | |
445 | global gdb_prompt | |
446 | global decimal | |
447 | ||
448 | if ![target_info exists gdb_stub] { | |
449 | return [runto main] | |
450 | } | |
451 | ||
452 | delete_breakpoints | |
453 | ||
454 | gdb_step_for_stub; | |
455 | ||
456 | return 1 | |
457 | } | |
458 | ||
7a292a7a | 459 | |
4ce44c66 JM |
460 | ### Continue, and expect to hit a breakpoint. |
461 | ### Report a pass or fail, depending on whether it seems to have | |
462 | ### worked. Use NAME as part of the test name; each call to | |
463 | ### continue_to_breakpoint should use a NAME which is unique within | |
464 | ### that test file. | |
74960c60 | 465 | proc gdb_continue_to_breakpoint {name {location_pattern .*}} { |
4ce44c66 JM |
466 | global gdb_prompt |
467 | set full_name "continue to breakpoint: $name" | |
468 | ||
469 | send_gdb "continue\n" | |
470 | gdb_expect { | |
b02a33db | 471 | -re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" { |
4ce44c66 JM |
472 | pass $full_name |
473 | } | |
474 | -re ".*$gdb_prompt $" { | |
475 | fail $full_name | |
476 | } | |
477 | timeout { | |
478 | fail "$full_name (timeout)" | |
479 | } | |
480 | } | |
481 | } | |
482 | ||
483 | ||
039cf96d AC |
484 | # gdb_internal_error_resync: |
485 | # | |
486 | # Answer the questions GDB asks after it reports an internal error | |
487 | # until we get back to a GDB prompt. Decline to quit the debugging | |
488 | # session, and decline to create a core file. Return non-zero if the | |
489 | # resync succeeds. | |
490 | # | |
491 | # This procedure just answers whatever questions come up until it sees | |
492 | # a GDB prompt; it doesn't require you to have matched the input up to | |
493 | # any specific point. However, it only answers questions it sees in | |
494 | # the output itself, so if you've matched a question, you had better | |
495 | # answer it yourself before calling this. | |
496 | # | |
497 | # You can use this function thus: | |
498 | # | |
499 | # gdb_expect { | |
500 | # ... | |
501 | # -re ".*A problem internal to GDB has been detected" { | |
502 | # gdb_internal_error_resync | |
503 | # } | |
504 | # ... | |
505 | # } | |
506 | # | |
507 | proc gdb_internal_error_resync {} { | |
508 | global gdb_prompt | |
509 | ||
510 | set count 0 | |
511 | while {$count < 10} { | |
512 | gdb_expect { | |
513 | -re "Quit this debugging session\\? \\(y or n\\) $" { | |
514 | send_gdb "n\n" | |
515 | incr count | |
516 | } | |
517 | -re "Create a core file of GDB\\? \\(y or n\\) $" { | |
518 | send_gdb "n\n" | |
519 | incr count | |
520 | } | |
521 | -re "$gdb_prompt $" { | |
522 | # We're resynchronized. | |
523 | return 1 | |
524 | } | |
525 | timeout { | |
526 | perror "Could not resync from internal error (timeout)" | |
527 | return 0 | |
528 | } | |
529 | } | |
530 | } | |
2b211c59 AC |
531 | perror "Could not resync from internal error (resync count exceeded)" |
532 | return 0 | |
039cf96d AC |
533 | } |
534 | ||
4ce44c66 | 535 | |
2307bd6a | 536 | # gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS |
8dbfb380 | 537 | # Send a command to gdb; test the result. |
c906108c SS |
538 | # |
539 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
540 | # this is the null string no command is sent. | |
2307bd6a DJ |
541 | # MESSAGE is a message to be printed with the built-in failure patterns |
542 | # if one of them matches. If MESSAGE is empty COMMAND will be used. | |
543 | # EXPECT_ARGUMENTS will be fed to expect in addition to the standard | |
544 | # patterns. Pattern elements will be evaluated in the caller's | |
545 | # context; action elements will be executed in the caller's context. | |
546 | # Unlike patterns for gdb_test, these patterns should generally include | |
547 | # the final newline and prompt. | |
c906108c SS |
548 | # |
549 | # Returns: | |
2307bd6a DJ |
550 | # 1 if the test failed, according to a built-in failure pattern |
551 | # 0 if only user-supplied patterns matched | |
c906108c SS |
552 | # -1 if there was an internal error. |
553 | # | |
d422fe19 AC |
554 | # You can use this function thus: |
555 | # | |
556 | # gdb_test_multiple "print foo" "test foo" { | |
557 | # -re "expected output 1" { | |
558 | # pass "print foo" | |
559 | # } | |
560 | # -re "expected output 2" { | |
561 | # fail "print foo" | |
562 | # } | |
563 | # } | |
564 | # | |
565 | # The standard patterns, such as "Program exited..." and "A problem | |
566 | # ...", all being implicitly appended to that list. | |
567 | # | |
2307bd6a | 568 | proc gdb_test_multiple { command message user_code } { |
c906108c SS |
569 | global verbose |
570 | global gdb_prompt | |
571 | global GDB | |
572 | upvar timeout timeout | |
c47cebdb | 573 | upvar expect_out expect_out |
c906108c | 574 | |
2307bd6a DJ |
575 | if { $message == "" } { |
576 | set message $command | |
c906108c | 577 | } |
c906108c | 578 | |
2307bd6a DJ |
579 | # TCL/EXPECT WART ALERT |
580 | # Expect does something very strange when it receives a single braced | |
581 | # argument. It splits it along word separators and performs substitutions. | |
582 | # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is | |
583 | # evaluated as "\[ab\]". But that's not how TCL normally works; inside a | |
584 | # double-quoted list item, "\[ab\]" is just a long way of representing | |
585 | # "[ab]", because the backslashes will be removed by lindex. | |
586 | ||
587 | # Unfortunately, there appears to be no easy way to duplicate the splitting | |
588 | # that expect will do from within TCL. And many places make use of the | |
589 | # "\[0-9\]" construct, so we need to support that; and some places make use | |
590 | # of the "[func]" construct, so we need to support that too. In order to | |
591 | # get this right we have to substitute quoted list elements differently | |
592 | # from braced list elements. | |
593 | ||
594 | # We do this roughly the same way that Expect does it. We have to use two | |
595 | # lists, because if we leave unquoted newlines in the argument to uplevel | |
596 | # they'll be treated as command separators, and if we escape newlines | |
597 | # we mangle newlines inside of command blocks. This assumes that the | |
598 | # input doesn't contain a pattern which contains actual embedded newlines | |
599 | # at this point! | |
600 | ||
601 | regsub -all {\n} ${user_code} { } subst_code | |
602 | set subst_code [uplevel list $subst_code] | |
603 | ||
604 | set processed_code "" | |
605 | set patterns "" | |
606 | set expecting_action 0 | |
607 | foreach item $user_code subst_item $subst_code { | |
608 | if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } { | |
609 | lappend processed_code $item | |
610 | continue | |
611 | } | |
612 | if {$item == "-indices" || $item == "-re" || $item == "-ex"} { | |
613 | lappend processed_code $item | |
614 | continue | |
615 | } | |
616 | if { $expecting_action } { | |
617 | lappend processed_code "uplevel [list $item]" | |
618 | set expecting_action 0 | |
619 | # Cosmetic, no effect on the list. | |
620 | append processed_code "\n" | |
621 | continue | |
622 | } | |
623 | set expecting_action 1 | |
624 | lappend processed_code $subst_item | |
625 | if {$patterns != ""} { | |
626 | append patterns "; " | |
627 | } | |
628 | append patterns "\"$subst_item\"" | |
c906108c SS |
629 | } |
630 | ||
2307bd6a DJ |
631 | # Also purely cosmetic. |
632 | regsub -all {\r} $patterns {\\r} patterns | |
633 | regsub -all {\n} $patterns {\\n} patterns | |
634 | ||
c906108c SS |
635 | if $verbose>2 then { |
636 | send_user "Sending \"$command\" to gdb\n" | |
2307bd6a | 637 | send_user "Looking to match \"$patterns\"\n" |
c906108c SS |
638 | send_user "Message is \"$message\"\n" |
639 | } | |
640 | ||
641 | set result -1 | |
642 | set string "${command}\n"; | |
643 | if { $command != "" } { | |
644 | while { "$string" != "" } { | |
645 | set foo [string first "\n" "$string"]; | |
646 | set len [string length "$string"]; | |
647 | if { $foo < [expr $len - 1] } { | |
648 | set str [string range "$string" 0 $foo]; | |
649 | if { [send_gdb "$str"] != "" } { | |
650 | global suppress_flag; | |
651 | ||
652 | if { ! $suppress_flag } { | |
653 | perror "Couldn't send $command to GDB."; | |
654 | } | |
655 | fail "$message"; | |
656 | return $result; | |
657 | } | |
a0b3c4fd JM |
658 | # since we're checking if each line of the multi-line |
659 | # command are 'accepted' by GDB here, | |
660 | # we need to set -notransfer expect option so that | |
661 | # command output is not lost for pattern matching | |
662 | # - guo | |
5f279fa6 DJ |
663 | gdb_expect 2 { |
664 | -notransfer -re "\[\r\n\]" { verbose "partial: match" 3 } | |
665 | timeout { verbose "partial: timeout" 3 } | |
c906108c SS |
666 | } |
667 | set string [string range "$string" [expr $foo + 1] end]; | |
668 | } else { | |
669 | break; | |
670 | } | |
671 | } | |
672 | if { "$string" != "" } { | |
673 | if { [send_gdb "$string"] != "" } { | |
674 | global suppress_flag; | |
675 | ||
676 | if { ! $suppress_flag } { | |
677 | perror "Couldn't send $command to GDB."; | |
678 | } | |
679 | fail "$message"; | |
680 | return $result; | |
681 | } | |
682 | } | |
683 | } | |
684 | ||
9d2e1bab ND |
685 | if [target_info exists gdb,timeout] { |
686 | set tmt [target_info gdb,timeout]; | |
c906108c | 687 | } else { |
c906108c SS |
688 | if [info exists timeout] { |
689 | set tmt $timeout; | |
690 | } else { | |
9d2e1bab ND |
691 | global timeout; |
692 | if [info exists timeout] { | |
693 | set tmt $timeout; | |
694 | } else { | |
695 | set tmt 60; | |
696 | } | |
c906108c SS |
697 | } |
698 | } | |
2307bd6a DJ |
699 | |
700 | set code { | |
039cf96d AC |
701 | -re ".*A problem internal to GDB has been detected" { |
702 | fail "$message (GDB internal error)" | |
703 | gdb_internal_error_resync | |
704 | } | |
c906108c SS |
705 | -re "\\*\\*\\* DOSEXIT code.*" { |
706 | if { $message != "" } { | |
707 | fail "$message"; | |
708 | } | |
709 | gdb_suppress_entire_file "GDB died"; | |
2307bd6a | 710 | set result -1; |
c906108c | 711 | } |
b0f4b84b DJ |
712 | } |
713 | append code $processed_code | |
714 | append code { | |
9e0b60a8 | 715 | -re "Ending remote debugging.*$gdb_prompt $" { |
c906108c SS |
716 | if ![isnative] then { |
717 | warning "Can`t communicate to remote target." | |
718 | } | |
719 | gdb_exit | |
720 | gdb_start | |
721 | set result -1 | |
722 | } | |
9e0b60a8 | 723 | -re "Undefined\[a-z\]* command:.*$gdb_prompt $" { |
c906108c | 724 | perror "Undefined command \"$command\"." |
9e0b60a8 | 725 | fail "$message" |
c906108c SS |
726 | set result 1 |
727 | } | |
728 | -re "Ambiguous command.*$gdb_prompt $" { | |
729 | perror "\"$command\" is not a unique command name." | |
9e0b60a8 | 730 | fail "$message" |
c906108c SS |
731 | set result 1 |
732 | } | |
733 | -re "Program exited with code \[0-9\]+.*$gdb_prompt $" { | |
734 | if ![string match "" $message] then { | |
ed4c619a | 735 | set errmsg "$message (the program exited)" |
c906108c | 736 | } else { |
ed4c619a | 737 | set errmsg "$command (the program exited)" |
c906108c SS |
738 | } |
739 | fail "$errmsg" | |
2307bd6a | 740 | set result -1 |
cb9a9d3e MS |
741 | } |
742 | -re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" { | |
743 | if ![string match "" $message] then { | |
ed4c619a | 744 | set errmsg "$message (the program exited)" |
cb9a9d3e | 745 | } else { |
ed4c619a | 746 | set errmsg "$command (the program exited)" |
cb9a9d3e MS |
747 | } |
748 | fail "$errmsg" | |
2307bd6a | 749 | set result -1 |
c906108c SS |
750 | } |
751 | -re "The program is not being run.*$gdb_prompt $" { | |
752 | if ![string match "" $message] then { | |
ed4c619a | 753 | set errmsg "$message (the program is no longer running)" |
c906108c | 754 | } else { |
ed4c619a | 755 | set errmsg "$command (the program is no longer running)" |
c906108c SS |
756 | } |
757 | fail "$errmsg" | |
2307bd6a | 758 | set result -1 |
c906108c | 759 | } |
734b8fe8 | 760 | -re "\r\n$gdb_prompt $" { |
c906108c SS |
761 | if ![string match "" $message] then { |
762 | fail "$message" | |
763 | } | |
764 | set result 1 | |
765 | } | |
766 | "<return>" { | |
767 | send_gdb "\n" | |
768 | perror "Window too small." | |
9e0b60a8 | 769 | fail "$message" |
2307bd6a | 770 | set result -1 |
c906108c SS |
771 | } |
772 | -re "\\(y or n\\) " { | |
773 | send_gdb "n\n" | |
774 | perror "Got interactive prompt." | |
9e0b60a8 | 775 | fail "$message" |
2307bd6a | 776 | set result -1 |
c906108c SS |
777 | } |
778 | eof { | |
779 | perror "Process no longer exists" | |
780 | if { $message != "" } { | |
781 | fail "$message" | |
782 | } | |
783 | return -1 | |
784 | } | |
785 | full_buffer { | |
786 | perror "internal buffer is full." | |
9e0b60a8 | 787 | fail "$message" |
2307bd6a | 788 | set result -1 |
c906108c SS |
789 | } |
790 | timeout { | |
791 | if ![string match "" $message] then { | |
792 | fail "$message (timeout)" | |
793 | } | |
794 | set result 1 | |
795 | } | |
796 | } | |
2307bd6a DJ |
797 | |
798 | set result 0 | |
04f6ecf2 DJ |
799 | set code [catch {gdb_expect $tmt $code} string] |
800 | if {$code == 1} { | |
801 | global errorInfo errorCode; | |
802 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string | |
803 | } elseif {$code == 2} { | |
804 | return -code return $string | |
805 | } elseif {$code == 3} { | |
806 | return | |
807 | } elseif {$code > 4} { | |
808 | return -code $code $string | |
809 | } | |
c906108c SS |
810 | return $result |
811 | } | |
2307bd6a DJ |
812 | |
813 | # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE | |
814 | # Send a command to gdb; test the result. | |
815 | # | |
816 | # COMMAND is the command to execute, send to GDB with send_gdb. If | |
817 | # this is the null string no command is sent. | |
818 | # PATTERN is the pattern to match for a PASS, and must NOT include | |
819 | # the \r\n sequence immediately before the gdb prompt. | |
820 | # MESSAGE is an optional message to be printed. If this is | |
821 | # omitted, then the pass/fail messages use the command string as the | |
822 | # message. (If this is the empty string, then sometimes we don't | |
823 | # call pass or fail at all; I don't understand this at all.) | |
824 | # QUESTION is a question GDB may ask in response to COMMAND, like | |
825 | # "are you sure?" | |
826 | # RESPONSE is the response to send if QUESTION appears. | |
827 | # | |
828 | # Returns: | |
829 | # 1 if the test failed, | |
830 | # 0 if the test passes, | |
831 | # -1 if there was an internal error. | |
832 | # | |
833 | proc gdb_test { args } { | |
834 | global verbose | |
835 | global gdb_prompt | |
836 | global GDB | |
837 | upvar timeout timeout | |
838 | ||
839 | if [llength $args]>2 then { | |
840 | set message [lindex $args 2] | |
841 | } else { | |
842 | set message [lindex $args 0] | |
843 | } | |
844 | set command [lindex $args 0] | |
845 | set pattern [lindex $args 1] | |
846 | ||
847 | if [llength $args]==5 { | |
848 | set question_string [lindex $args 3]; | |
849 | set response_string [lindex $args 4]; | |
850 | } else { | |
851 | set question_string "^FOOBAR$" | |
852 | } | |
853 | ||
854 | return [gdb_test_multiple $command $message { | |
855 | -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" { | |
856 | if ![string match "" $message] then { | |
857 | pass "$message" | |
858 | } | |
859 | } | |
860 | -re "(${question_string})$" { | |
861 | send_gdb "$response_string\n"; | |
862 | exp_continue; | |
863 | } | |
864 | }] | |
865 | } | |
c906108c SS |
866 | \f |
867 | # Test that a command gives an error. For pass or fail, return | |
868 | # a 1 to indicate that more tests can proceed. However a timeout | |
869 | # is a serious error, generates a special fail message, and causes | |
870 | # a 0 to be returned to indicate that more tests are likely to fail | |
871 | # as well. | |
872 | ||
873 | proc test_print_reject { args } { | |
874 | global gdb_prompt | |
875 | global verbose | |
876 | ||
877 | if [llength $args]==2 then { | |
878 | set expectthis [lindex $args 1] | |
879 | } else { | |
880 | set expectthis "should never match this bogus string" | |
881 | } | |
882 | set sendthis [lindex $args 0] | |
883 | if $verbose>2 then { | |
884 | send_user "Sending \"$sendthis\" to gdb\n" | |
885 | send_user "Looking to match \"$expectthis\"\n" | |
886 | } | |
887 | send_gdb "$sendthis\n" | |
888 | #FIXME: Should add timeout as parameter. | |
889 | gdb_expect { | |
890 | -re "A .* in expression.*\\.*$gdb_prompt $" { | |
891 | pass "reject $sendthis" | |
892 | return 1 | |
893 | } | |
894 | -re "Invalid syntax in expression.*$gdb_prompt $" { | |
895 | pass "reject $sendthis" | |
896 | return 1 | |
897 | } | |
898 | -re "Junk after end of expression.*$gdb_prompt $" { | |
899 | pass "reject $sendthis" | |
900 | return 1 | |
901 | } | |
902 | -re "Invalid number.*$gdb_prompt $" { | |
903 | pass "reject $sendthis" | |
904 | return 1 | |
905 | } | |
906 | -re "Invalid character constant.*$gdb_prompt $" { | |
907 | pass "reject $sendthis" | |
908 | return 1 | |
909 | } | |
910 | -re "No symbol table is loaded.*$gdb_prompt $" { | |
911 | pass "reject $sendthis" | |
912 | return 1 | |
913 | } | |
914 | -re "No symbol .* in current context.*$gdb_prompt $" { | |
915 | pass "reject $sendthis" | |
916 | return 1 | |
917 | } | |
c4b7bc2b JB |
918 | -re "Unmatched single quote.*$gdb_prompt $" { |
919 | pass "reject $sendthis" | |
920 | return 1 | |
921 | } | |
922 | -re "A character constant must contain at least one character.*$gdb_prompt $" { | |
923 | pass "reject $sendthis" | |
924 | return 1 | |
925 | } | |
c906108c SS |
926 | -re "$expectthis.*$gdb_prompt $" { |
927 | pass "reject $sendthis" | |
928 | return 1 | |
929 | } | |
930 | -re ".*$gdb_prompt $" { | |
931 | fail "reject $sendthis" | |
932 | return 1 | |
933 | } | |
934 | default { | |
935 | fail "reject $sendthis (eof or timeout)" | |
936 | return 0 | |
937 | } | |
938 | } | |
939 | } | |
940 | \f | |
941 | # Given an input string, adds backslashes as needed to create a | |
942 | # regexp that will match the string. | |
943 | ||
944 | proc string_to_regexp {str} { | |
945 | set result $str | |
39fb8e9e | 946 | regsub -all {[]*+.|()^$\[\\]} $str {\\&} result |
c906108c SS |
947 | return $result |
948 | } | |
949 | ||
950 | # Same as gdb_test, but the second parameter is not a regexp, | |
951 | # but a string that must match exactly. | |
952 | ||
953 | proc gdb_test_exact { args } { | |
954 | upvar timeout timeout | |
955 | ||
956 | set command [lindex $args 0] | |
957 | ||
958 | # This applies a special meaning to a null string pattern. Without | |
959 | # this, "$pattern\r\n$gdb_prompt $" will match anything, including error | |
960 | # messages from commands that should have no output except a new | |
961 | # prompt. With this, only results of a null string will match a null | |
962 | # string pattern. | |
963 | ||
964 | set pattern [lindex $args 1] | |
965 | if [string match $pattern ""] { | |
966 | set pattern [string_to_regexp [lindex $args 0]] | |
967 | } else { | |
968 | set pattern [string_to_regexp [lindex $args 1]] | |
969 | } | |
970 | ||
971 | # It is most natural to write the pattern argument with only | |
972 | # embedded \n's, especially if you are trying to avoid Tcl quoting | |
973 | # problems. But gdb_expect really wants to see \r\n in patterns. So | |
974 | # transform the pattern here. First transform \r\n back to \n, in | |
975 | # case some users of gdb_test_exact already do the right thing. | |
976 | regsub -all "\r\n" $pattern "\n" pattern | |
977 | regsub -all "\n" $pattern "\r\n" pattern | |
978 | if [llength $args]==3 then { | |
979 | set message [lindex $args 2] | |
980 | } else { | |
981 | set message $command | |
982 | } | |
983 | ||
984 | return [gdb_test $command $pattern $message] | |
985 | } | |
986 | \f | |
987 | proc gdb_reinitialize_dir { subdir } { | |
988 | global gdb_prompt | |
989 | ||
990 | if [is_remote host] { | |
991 | return ""; | |
992 | } | |
993 | send_gdb "dir\n" | |
994 | gdb_expect 60 { | |
995 | -re "Reinitialize source path to empty.*y or n. " { | |
996 | send_gdb "y\n" | |
997 | gdb_expect 60 { | |
998 | -re "Source directories searched.*$gdb_prompt $" { | |
999 | send_gdb "dir $subdir\n" | |
1000 | gdb_expect 60 { | |
1001 | -re "Source directories searched.*$gdb_prompt $" { | |
1002 | verbose "Dir set to $subdir" | |
1003 | } | |
1004 | -re "$gdb_prompt $" { | |
1005 | perror "Dir \"$subdir\" failed." | |
1006 | } | |
1007 | } | |
1008 | } | |
1009 | -re "$gdb_prompt $" { | |
1010 | perror "Dir \"$subdir\" failed." | |
1011 | } | |
1012 | } | |
1013 | } | |
1014 | -re "$gdb_prompt $" { | |
1015 | perror "Dir \"$subdir\" failed." | |
1016 | } | |
1017 | } | |
1018 | } | |
1019 | ||
1020 | # | |
1021 | # gdb_exit -- exit the GDB, killing the target program if necessary | |
1022 | # | |
1023 | proc default_gdb_exit {} { | |
1024 | global GDB | |
6b8ce727 | 1025 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c SS |
1026 | global verbose |
1027 | global gdb_spawn_id; | |
1028 | ||
1029 | gdb_stop_suppressing_tests; | |
1030 | ||
1031 | if ![info exists gdb_spawn_id] { | |
1032 | return; | |
1033 | } | |
1034 | ||
6b8ce727 | 1035 | verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c SS |
1036 | |
1037 | if { [is_remote host] && [board_info host exists fileid] } { | |
1038 | send_gdb "quit\n"; | |
1039 | gdb_expect 10 { | |
1040 | -re "y or n" { | |
1041 | send_gdb "y\n"; | |
1042 | exp_continue; | |
1043 | } | |
1044 | -re "DOSEXIT code" { } | |
1045 | default { } | |
1046 | } | |
1047 | } | |
1048 | ||
1049 | if ![is_remote host] { | |
1050 | remote_close host; | |
1051 | } | |
1052 | unset gdb_spawn_id | |
1053 | } | |
1054 | ||
3e3ffd2b | 1055 | # Load a file into the debugger. |
2db8e78e | 1056 | # The return value is 0 for success, -1 for failure. |
c906108c | 1057 | # |
2db8e78e MC |
1058 | # This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO |
1059 | # to one of these values: | |
3e3ffd2b | 1060 | # |
2db8e78e MC |
1061 | # debug file was loaded successfully and has debug information |
1062 | # nodebug file was loaded successfully and has no debug information | |
1063 | # fail file was not loaded | |
c906108c | 1064 | # |
2db8e78e MC |
1065 | # I tried returning this information as part of the return value, |
1066 | # but ran into a mess because of the many re-implementations of | |
1067 | # gdb_load in config/*.exp. | |
3e3ffd2b | 1068 | # |
2db8e78e MC |
1069 | # TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use |
1070 | # this if they can get more information set. | |
3e3ffd2b | 1071 | |
c906108c | 1072 | proc gdb_file_cmd { arg } { |
3e3ffd2b | 1073 | global gdb_prompt |
c906108c | 1074 | global verbose |
c906108c | 1075 | global GDB |
b741e217 DJ |
1076 | global last_loaded_file |
1077 | ||
1078 | set last_loaded_file $arg | |
c906108c | 1079 | |
2db8e78e MC |
1080 | # Set whether debug info was found. |
1081 | # Default to "fail". | |
1082 | global gdb_file_cmd_debug_info | |
1083 | set gdb_file_cmd_debug_info "fail" | |
1084 | ||
c906108c | 1085 | if [is_remote host] { |
3e3ffd2b | 1086 | set arg [remote_download host $arg] |
c906108c | 1087 | if { $arg == "" } { |
2db8e78e MC |
1088 | perror "download failed" |
1089 | return -1 | |
c906108c SS |
1090 | } |
1091 | } | |
1092 | ||
4c42eaff DJ |
1093 | # The file command used to kill the remote target. For the benefit |
1094 | # of the testsuite, preserve this behavior. | |
1095 | send_gdb "kill\n" | |
1096 | gdb_expect 120 { | |
1097 | -re "Kill the program being debugged. .y or n. $" { | |
1098 | send_gdb "y\n" | |
1099 | verbose "\t\tKilling previous program being debugged" | |
1100 | exp_continue | |
1101 | } | |
1102 | -re "$gdb_prompt $" { | |
1103 | # OK. | |
1104 | } | |
1105 | } | |
1106 | ||
c906108c SS |
1107 | send_gdb "file $arg\n" |
1108 | gdb_expect 120 { | |
3e3ffd2b MC |
1109 | -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" { |
1110 | verbose "\t\tLoaded $arg into the $GDB with no debugging symbols" | |
2db8e78e MC |
1111 | set gdb_file_cmd_debug_info "nodebug" |
1112 | return 0 | |
3e3ffd2b | 1113 | } |
c906108c SS |
1114 | -re "Reading symbols from.*done.*$gdb_prompt $" { |
1115 | verbose "\t\tLoaded $arg into the $GDB" | |
2db8e78e MC |
1116 | set gdb_file_cmd_debug_info "debug" |
1117 | return 0 | |
c906108c | 1118 | } |
c906108c SS |
1119 | -re "Load new symbol table from \".*\".*y or n. $" { |
1120 | send_gdb "y\n" | |
1121 | gdb_expect 120 { | |
1122 | -re "Reading symbols from.*done.*$gdb_prompt $" { | |
1123 | verbose "\t\tLoaded $arg with new symbol table into $GDB" | |
2db8e78e MC |
1124 | set gdb_file_cmd_debug_info "debug" |
1125 | return 0 | |
c906108c SS |
1126 | } |
1127 | timeout { | |
2db8e78e MC |
1128 | perror "(timeout) Couldn't load $arg, other program already loaded." |
1129 | return -1 | |
c906108c SS |
1130 | } |
1131 | } | |
1132 | } | |
1133 | -re "No such file or directory.*$gdb_prompt $" { | |
2db8e78e MC |
1134 | perror "($arg) No such file or directory" |
1135 | return -1 | |
c906108c SS |
1136 | } |
1137 | -re "$gdb_prompt $" { | |
2db8e78e MC |
1138 | perror "couldn't load $arg into $GDB." |
1139 | return -1 | |
c906108c SS |
1140 | } |
1141 | timeout { | |
2db8e78e MC |
1142 | perror "couldn't load $arg into $GDB (timed out)." |
1143 | return -1 | |
c906108c SS |
1144 | } |
1145 | eof { | |
1146 | # This is an attempt to detect a core dump, but seems not to | |
1147 | # work. Perhaps we need to match .* followed by eof, in which | |
1148 | # gdb_expect does not seem to have a way to do that. | |
2db8e78e MC |
1149 | perror "couldn't load $arg into $GDB (end of file)." |
1150 | return -1 | |
c906108c SS |
1151 | } |
1152 | } | |
1153 | } | |
1154 | ||
1155 | # | |
1156 | # start gdb -- start gdb running, default procedure | |
1157 | # | |
1158 | # When running over NFS, particularly if running many simultaneous | |
1159 | # tests on different hosts all using the same server, things can | |
1160 | # get really slow. Give gdb at least 3 minutes to start up. | |
1161 | # | |
1162 | proc default_gdb_start { } { | |
1163 | global verbose | |
1164 | global GDB | |
6b8ce727 | 1165 | global INTERNAL_GDBFLAGS GDBFLAGS |
c906108c SS |
1166 | global gdb_prompt |
1167 | global timeout | |
1168 | global gdb_spawn_id; | |
6c7a06a3 | 1169 | global env |
c906108c SS |
1170 | |
1171 | gdb_stop_suppressing_tests; | |
1172 | ||
6c7a06a3 TT |
1173 | set env(LC_CTYPE) C |
1174 | ||
4662c76e JK |
1175 | # Don't let a .inputrc file or an existing setting of INPUTRC mess up |
1176 | # the test results. Even if /dev/null doesn't exist on the particular | |
1177 | # platform, the readline library will use the default setting just by | |
1178 | # failing to open the file. OTOH, opening /dev/null successfully will | |
1179 | # also result in the default settings being used since nothing will be | |
1180 | # read from this file. | |
1181 | set env(INPUTRC) "/dev/null" | |
1182 | ||
1183 | # The gdb.base/readline.exp arrow key test relies on the standard VT100 | |
1184 | # bindings, so make sure that an appropriate terminal is selected. | |
1185 | # The same bug doesn't show up if we use ^P / ^N instead. | |
1186 | set env(TERM) "vt100" | |
1187 | ||
6b8ce727 | 1188 | verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
c906108c SS |
1189 | |
1190 | if [info exists gdb_spawn_id] { | |
1191 | return 0; | |
1192 | } | |
1193 | ||
1194 | if ![is_remote host] { | |
1195 | if { [which $GDB] == 0 } then { | |
1196 | perror "$GDB does not exist." | |
1197 | exit 1 | |
1198 | } | |
1199 | } | |
6b8ce727 | 1200 | set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"]; |
c906108c SS |
1201 | if { $res < 0 || $res == "" } { |
1202 | perror "Spawning $GDB failed." | |
1203 | return 1; | |
1204 | } | |
1205 | gdb_expect 360 { | |
1206 | -re "\[\r\n\]$gdb_prompt $" { | |
1207 | verbose "GDB initialized." | |
1208 | } | |
1209 | -re "$gdb_prompt $" { | |
1210 | perror "GDB never initialized." | |
1211 | return -1 | |
1212 | } | |
1213 | timeout { | |
1214 | perror "(timeout) GDB never initialized after 10 seconds." | |
1215 | remote_close host; | |
1216 | return -1 | |
1217 | } | |
1218 | } | |
1219 | set gdb_spawn_id -1; | |
1220 | # force the height to "unlimited", so no pagers get used | |
1221 | ||
1222 | send_gdb "set height 0\n" | |
1223 | gdb_expect 10 { | |
1224 | -re "$gdb_prompt $" { | |
1225 | verbose "Setting height to 0." 2 | |
1226 | } | |
1227 | timeout { | |
1228 | warning "Couldn't set the height to 0" | |
1229 | } | |
1230 | } | |
1231 | # force the width to "unlimited", so no wraparound occurs | |
1232 | send_gdb "set width 0\n" | |
1233 | gdb_expect 10 { | |
1234 | -re "$gdb_prompt $" { | |
1235 | verbose "Setting width to 0." 2 | |
1236 | } | |
1237 | timeout { | |
1238 | warning "Couldn't set the width to 0." | |
1239 | } | |
1240 | } | |
1241 | return 0; | |
1242 | } | |
1243 | ||
d4f3574e SS |
1244 | # Return a 1 for configurations for which we don't even want to try to |
1245 | # test C++. | |
1246 | ||
1247 | proc skip_cplus_tests {} { | |
d4f3574e SS |
1248 | if { [istarget "h8300-*-*"] } { |
1249 | return 1 | |
1250 | } | |
81d2cbae | 1251 | |
1146c7f1 SC |
1252 | # The C++ IO streams are too large for HC11/HC12 and are thus not |
1253 | # available. The gdb C++ tests use them and don't compile. | |
1254 | if { [istarget "m6811-*-*"] } { | |
1255 | return 1 | |
1256 | } | |
1257 | if { [istarget "m6812-*-*"] } { | |
1258 | return 1 | |
1259 | } | |
d4f3574e SS |
1260 | return 0 |
1261 | } | |
1262 | ||
89a237cb MC |
1263 | # Return a 1 if I don't even want to try to test FORTRAN. |
1264 | ||
1265 | proc skip_fortran_tests {} { | |
1266 | return 0 | |
1267 | } | |
1268 | ||
93f02886 DJ |
1269 | # Return a 1 if we should skip shared library tests. |
1270 | ||
1271 | proc skip_shlib_tests {} { | |
1272 | # Run the shared library tests on native systems. | |
1273 | if {[isnative]} { | |
1274 | return 0 | |
1275 | } | |
1276 | ||
1277 | # An abbreviated list of remote targets where we should be able to | |
1278 | # run shared library tests. | |
1279 | if {([istarget *-*-linux*] | |
1280 | || [istarget *-*-*bsd*] | |
1281 | || [istarget *-*-solaris2*] | |
1282 | || [istarget arm*-*-symbianelf*] | |
1283 | || [istarget *-*-mingw*] | |
1284 | || [istarget *-*-cygwin*] | |
1285 | || [istarget *-*-pe*])} { | |
1286 | return 0 | |
1287 | } | |
1288 | ||
1289 | return 1 | |
1290 | } | |
1291 | ||
3c95e6af PG |
1292 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
1293 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
1294 | ||
1295 | proc skip_altivec_tests {} { | |
1296 | global skip_vmx_tests_saved | |
1297 | global srcdir subdir gdb_prompt | |
1298 | ||
1299 | # Use the cached value, if it exists. | |
1300 | set me "skip_altivec_tests" | |
1301 | if [info exists skip_vmx_tests_saved] { | |
1302 | verbose "$me: returning saved $skip_vmx_tests_saved" 2 | |
1303 | return $skip_vmx_tests_saved | |
1304 | } | |
1305 | ||
1306 | # Some simulators are known to not support VMX instructions. | |
1307 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
1308 | verbose "$me: target known to not support VMX, returning 1" 2 | |
476308bf | 1309 | return [set skip_vmx_tests_saved 1] |
3c95e6af PG |
1310 | } |
1311 | ||
1312 | # Make sure we have a compiler that understands altivec. | |
fc91c6c2 | 1313 | set compile_flags {debug nowarnings} |
3c95e6af PG |
1314 | if [get_compiler_info not-used] { |
1315 | warning "Could not get compiler info" | |
1316 | return 1 | |
1317 | } | |
1318 | if [test_compiler_info gcc*] { | |
1319 | set compile_flags "$compile_flags additional_flags=-maltivec" | |
1320 | } elseif [test_compiler_info xlc*] { | |
1321 | set compile_flags "$compile_flags additional_flags=-qaltivec" | |
1322 | } else { | |
1323 | verbose "Could not compile with altivec support, returning 1" 2 | |
1324 | return 1 | |
1325 | } | |
1326 | ||
1327 | # Set up, compile, and execute a test program containing VMX instructions. | |
1328 | # Include the current process ID in the file names to prevent conflicts | |
1329 | # with invocations for multiple testsuites. | |
1330 | set src vmx[pid].c | |
1331 | set exe vmx[pid].x | |
1332 | ||
1333 | set f [open $src "w"] | |
1334 | puts $f "int main() {" | |
1335 | puts $f "#ifdef __MACH__" | |
1336 | puts $f " asm volatile (\"vor v0,v0,v0\");" | |
1337 | puts $f "#else" | |
1338 | puts $f " asm volatile (\"vor 0,0,0\");" | |
1339 | puts $f "#endif" | |
1340 | puts $f " return 0; }" | |
1341 | close $f | |
1342 | ||
1343 | verbose "$me: compiling testfile $src" 2 | |
1344 | set lines [gdb_compile $src $exe executable $compile_flags] | |
1345 | file delete $src | |
1346 | ||
1347 | if ![string match "" $lines] then { | |
1348 | verbose "$me: testfile compilation failed, returning 1" 2 | |
1349 | return [set skip_vmx_tests_saved 1] | |
1350 | } | |
1351 | ||
1352 | # No error message, compilation succeeded so now run it via gdb. | |
1353 | ||
1354 | gdb_exit | |
1355 | gdb_start | |
1356 | gdb_reinitialize_dir $srcdir/$subdir | |
1357 | gdb_load "$exe" | |
1358 | gdb_run_cmd | |
1359 | gdb_expect { | |
1360 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
1361 | verbose -log "\n$me altivec hardware not detected" | |
1362 | set skip_vmx_tests_saved 1 | |
1363 | } | |
1364 | -re ".*Program exited normally.*${gdb_prompt} $" { | |
1365 | verbose -log "\n$me: altivec hardware detected" | |
1366 | set skip_vmx_tests_saved 0 | |
1367 | } | |
1368 | default { | |
1369 | warning "\n$me: default case taken" | |
1370 | set skip_vmx_tests_saved 1 | |
1371 | } | |
1372 | } | |
1373 | gdb_exit | |
1374 | remote_file build delete $exe | |
1375 | ||
1376 | verbose "$me: returning $skip_vmx_tests_saved" 2 | |
1377 | return $skip_vmx_tests_saved | |
1378 | } | |
1379 | ||
604c2f83 LM |
1380 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
1381 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. | |
1382 | ||
1383 | proc skip_vsx_tests {} { | |
1384 | global skip_vsx_tests_saved | |
1385 | global srcdir subdir gdb_prompt | |
1386 | ||
1387 | # Use the cached value, if it exists. | |
1388 | set me "skip_vsx_tests" | |
1389 | if [info exists skip_vsx_tests_saved] { | |
1390 | verbose "$me: returning saved $skip_vsx_tests_saved" 2 | |
1391 | return $skip_vsx_tests_saved | |
1392 | } | |
1393 | ||
1394 | # Some simulators are known to not support Altivec instructions, so | |
1395 | # they won't support VSX instructions as well. | |
1396 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { | |
1397 | verbose "$me: target known to not support VSX, returning 1" 2 | |
1398 | return [set skip_vsx_tests_saved 1] | |
1399 | } | |
1400 | ||
1401 | # Make sure we have a compiler that understands altivec. | |
1402 | set compile_flags {debug nowarnings quiet} | |
1403 | if [get_compiler_info not-used] { | |
1404 | warning "Could not get compiler info" | |
1405 | return 1 | |
1406 | } | |
1407 | if [test_compiler_info gcc*] { | |
1408 | set compile_flags "$compile_flags additional_flags=-mvsx" | |
1409 | } elseif [test_compiler_info xlc*] { | |
1410 | set compile_flags "$compile_flags additional_flags=-qvsx" | |
1411 | } else { | |
1412 | verbose "Could not compile with vsx support, returning 1" 2 | |
1413 | return 1 | |
1414 | } | |
1415 | ||
1416 | set src vsx[pid].c | |
1417 | set exe vsx[pid].x | |
1418 | ||
1419 | set f [open $src "w"] | |
1420 | puts $f "int main() {" | |
1421 | puts $f "#ifdef __MACH__" | |
1422 | puts $f " asm volatile (\"lxvd2x v0,v0,v0\");" | |
1423 | puts $f "#else" | |
1424 | puts $f " asm volatile (\"lxvd2x 0,0,0\");" | |
1425 | puts $f "#endif" | |
1426 | puts $f " return 0; }" | |
1427 | close $f | |
1428 | ||
1429 | verbose "$me: compiling testfile $src" 2 | |
1430 | set lines [gdb_compile $src $exe executable $compile_flags] | |
1431 | file delete $src | |
1432 | ||
1433 | if ![string match "" $lines] then { | |
1434 | verbose "$me: testfile compilation failed, returning 1" 2 | |
1435 | return [set skip_vsx_tests_saved 1] | |
1436 | } | |
1437 | ||
1438 | # No error message, compilation succeeded so now run it via gdb. | |
1439 | ||
1440 | gdb_exit | |
1441 | gdb_start | |
1442 | gdb_reinitialize_dir $srcdir/$subdir | |
1443 | gdb_load "$exe" | |
1444 | gdb_run_cmd | |
1445 | gdb_expect { | |
1446 | -re ".*Illegal instruction.*${gdb_prompt} $" { | |
1447 | verbose -log "\n$me VSX hardware not detected" | |
1448 | set skip_vsx_tests_saved 1 | |
1449 | } | |
1450 | -re ".*Program exited normally.*${gdb_prompt} $" { | |
1451 | verbose -log "\n$me: VSX hardware detected" | |
1452 | set skip_vsx_tests_saved 0 | |
1453 | } | |
1454 | default { | |
1455 | warning "\n$me: default case taken" | |
1456 | set skip_vsx_tests_saved 1 | |
1457 | } | |
1458 | } | |
1459 | gdb_exit | |
1460 | remote_file build delete $exe | |
1461 | ||
1462 | verbose "$me: returning $skip_vsx_tests_saved" 2 | |
1463 | return $skip_vsx_tests_saved | |
1464 | } | |
1465 | ||
7a292a7a SS |
1466 | # Skip all the tests in the file if you are not on an hppa running |
1467 | # hpux target. | |
1468 | ||
1469 | proc skip_hp_tests {} { | |
1470 | eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ] | |
c906108c SS |
1471 | verbose "Skip hp tests is $skip_hp" |
1472 | return $skip_hp | |
1473 | } | |
1474 | ||
edb3359d DJ |
1475 | # Return whether we should skip tests for showing inlined functions in |
1476 | # backtraces. Requires get_compiler_info and get_debug_format. | |
1477 | ||
1478 | proc skip_inline_frame_tests {} { | |
1479 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
1480 | if { ! [test_debug_format "DWARF 2"] } { | |
1481 | return 1 | |
1482 | } | |
1483 | ||
1484 | # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line. | |
1485 | if { ([test_compiler_info "gcc-2-*"] | |
1486 | || [test_compiler_info "gcc-3-*"] | |
1487 | || [test_compiler_info "gcc-4-0-*"]) } { | |
1488 | return 1 | |
1489 | } | |
1490 | ||
1491 | return 0 | |
1492 | } | |
1493 | ||
1494 | # Return whether we should skip tests for showing variables from | |
1495 | # inlined functions. Requires get_compiler_info and get_debug_format. | |
1496 | ||
1497 | proc skip_inline_var_tests {} { | |
1498 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). | |
1499 | if { ! [test_debug_format "DWARF 2"] } { | |
1500 | return 1 | |
1501 | } | |
1502 | ||
1503 | return 0 | |
1504 | } | |
1505 | ||
94b8e876 MC |
1506 | set compiler_info "unknown" |
1507 | set gcc_compiled 0 | |
1508 | set hp_cc_compiler 0 | |
1509 | set hp_aCC_compiler 0 | |
94b8e876 MC |
1510 | |
1511 | # Figure out what compiler I am using. | |
1512 | # | |
1513 | # BINFILE is a "compiler information" output file. This implementation | |
1514 | # does not use BINFILE. | |
1515 | # | |
1516 | # ARGS can be empty or "C++". If empty, "C" is assumed. | |
1517 | # | |
1518 | # There are several ways to do this, with various problems. | |
1519 | # | |
1520 | # [ gdb_compile -E $ifile -o $binfile.ci ] | |
1521 | # source $binfile.ci | |
1522 | # | |
1523 | # Single Unix Spec v3 says that "-E -o ..." together are not | |
1524 | # specified. And in fact, the native compiler on hp-ux 11 (among | |
1525 | # others) does not work with "-E -o ...". Most targets used to do | |
1526 | # this, and it mostly worked, because it works with gcc. | |
1527 | # | |
1528 | # [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ] | |
1529 | # source $binfile.ci | |
1530 | # | |
1531 | # This avoids the problem with -E and -o together. This almost works | |
1532 | # if the build machine is the same as the host machine, which is | |
1533 | # usually true of the targets which are not gcc. But this code does | |
1534 | # not figure which compiler to call, and it always ends up using the C | |
1535 | # compiler. Not good for setting hp_aCC_compiler. Targets | |
1536 | # hppa*-*-hpux* and mips*-*-irix* used to do this. | |
1537 | # | |
1538 | # [ gdb_compile -E $ifile > $binfile.ci ] | |
1539 | # source $binfile.ci | |
1540 | # | |
1541 | # dejagnu target_compile says that it supports output redirection, | |
1542 | # but the code is completely different from the normal path and I | |
1543 | # don't want to sweep the mines from that path. So I didn't even try | |
1544 | # this. | |
1545 | # | |
1546 | # set cppout [ gdb_compile $ifile "" preprocess $args quiet ] | |
1547 | # eval $cppout | |
1548 | # | |
1549 | # I actually do this for all targets now. gdb_compile runs the right | |
1550 | # compiler, and TCL captures the output, and I eval the output. | |
1551 | # | |
1552 | # Unfortunately, expect logs the output of the command as it goes by, | |
1553 | # and dejagnu helpfully prints a second copy of it right afterwards. | |
1554 | # So I turn off expect logging for a moment. | |
1555 | # | |
1556 | # [ gdb_compile $ifile $ciexe_file executable $args ] | |
1557 | # [ remote_exec $ciexe_file ] | |
1558 | # [ source $ci_file.out ] | |
1559 | # | |
1560 | # I could give up on -E and just do this. | |
1561 | # I didn't get desperate enough to try this. | |
1562 | # | |
1563 | # -- chastain 2004-01-06 | |
853d6e5b | 1564 | |
c906108c | 1565 | proc get_compiler_info {binfile args} { |
94b8e876 | 1566 | # For compiler.c and compiler.cc |
c906108c | 1567 | global srcdir |
94b8e876 MC |
1568 | |
1569 | # I am going to play with the log to keep noise out. | |
1570 | global outdir | |
1571 | global tool | |
1572 | ||
1573 | # These come from compiler.c or compiler.cc | |
853d6e5b | 1574 | global compiler_info |
4f70a4c9 MC |
1575 | |
1576 | # Legacy global data symbols. | |
94b8e876 MC |
1577 | global gcc_compiled |
1578 | global hp_cc_compiler | |
1579 | global hp_aCC_compiler | |
c906108c | 1580 | |
94b8e876 MC |
1581 | # Choose which file to preprocess. |
1582 | set ifile "${srcdir}/lib/compiler.c" | |
1583 | if { [llength $args] > 0 && [lindex $args 0] == "c++" } { | |
1584 | set ifile "${srcdir}/lib/compiler.cc" | |
c906108c | 1585 | } |
085dd6e6 | 1586 | |
94b8e876 MC |
1587 | # Run $ifile through the right preprocessor. |
1588 | # Toggle gdb.log to keep the compiler output out of the log. | |
1589 | log_file | |
e7f86de9 JM |
1590 | if [is_remote host] { |
1591 | # We have to use -E and -o together, despite the comments | |
1592 | # above, because of how DejaGnu handles remote host testing. | |
1593 | set ppout "$outdir/compiler.i" | |
1594 | gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet] | |
1595 | set file [open $ppout r] | |
1596 | set cppout [read $file] | |
1597 | close $file | |
1598 | } else { | |
1599 | set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ] | |
1600 | } | |
94b8e876 MC |
1601 | log_file -a "$outdir/$tool.log" |
1602 | ||
4f70a4c9 MC |
1603 | # Eval the output. |
1604 | set unknown 0 | |
94b8e876 | 1605 | foreach cppline [ split "$cppout" "\n" ] { |
4f70a4c9 MC |
1606 | if { [ regexp "^#" "$cppline" ] } { |
1607 | # line marker | |
1608 | } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } { | |
1609 | # blank line | |
1610 | } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } { | |
1611 | # eval this line | |
1612 | verbose "get_compiler_info: $cppline" 2 | |
1613 | eval "$cppline" | |
1614 | } else { | |
1615 | # unknown line | |
1616 | verbose -log "get_compiler_info: $cppline" | |
1617 | set unknown 1 | |
94b8e876 | 1618 | } |
085dd6e6 | 1619 | } |
4f70a4c9 MC |
1620 | |
1621 | # Reset to unknown compiler if any diagnostics happened. | |
1622 | if { $unknown } { | |
1623 | set compiler_info "unknown" | |
4f70a4c9 MC |
1624 | } |
1625 | ||
1626 | # Set the legacy symbols. | |
1627 | set gcc_compiled 0 | |
1628 | set hp_cc_compiler 0 | |
1629 | set hp_aCC_compiler 0 | |
1630 | if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 } | |
1631 | if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 } | |
1632 | if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 } | |
1633 | if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 } | |
1634 | if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 } | |
1635 | if { [regexp "^hpcc-" "$compiler_info" ] } { set hp_cc_compiler 1 } | |
1636 | if { [regexp "^hpacc-" "$compiler_info" ] } { set hp_aCC_compiler 1 } | |
1637 | ||
1638 | # Log what happened. | |
94b8e876 | 1639 | verbose -log "get_compiler_info: $compiler_info" |
085dd6e6 JM |
1640 | |
1641 | # Most compilers will evaluate comparisons and other boolean | |
1642 | # operations to 0 or 1. | |
1643 | uplevel \#0 { set true 1 } | |
1644 | uplevel \#0 { set false 0 } | |
1645 | ||
94b8e876 MC |
1646 | # Use of aCC results in boolean results being displayed as |
1647 | # "true" or "false" | |
1648 | if { $hp_aCC_compiler } { | |
1649 | uplevel \#0 { set true true } | |
1650 | uplevel \#0 { set false false } | |
085dd6e6 JM |
1651 | } |
1652 | ||
c906108c SS |
1653 | return 0; |
1654 | } | |
1655 | ||
9b593790 | 1656 | proc test_compiler_info { {compiler ""} } { |
853d6e5b | 1657 | global compiler_info |
6e87504d PG |
1658 | |
1659 | # if no arg, return the compiler_info string | |
1660 | ||
1661 | if [string match "" $compiler] { | |
1662 | if [info exists compiler_info] { | |
1663 | return $compiler_info | |
1664 | } else { | |
1665 | perror "No compiler info found." | |
1666 | } | |
1667 | } | |
1668 | ||
853d6e5b AC |
1669 | return [string match $compiler $compiler_info] |
1670 | } | |
1671 | ||
f1c47eb2 MS |
1672 | set gdb_wrapper_initialized 0 |
1673 | ||
1674 | proc gdb_wrapper_init { args } { | |
1675 | global gdb_wrapper_initialized; | |
1676 | global gdb_wrapper_file; | |
1677 | global gdb_wrapper_flags; | |
1678 | ||
1679 | if { $gdb_wrapper_initialized == 1 } { return; } | |
1680 | ||
1681 | if {[target_info exists needs_status_wrapper] && \ | |
277254ba | 1682 | [target_info needs_status_wrapper] != "0"} { |
f1c47eb2 MS |
1683 | set result [build_wrapper "testglue.o"]; |
1684 | if { $result != "" } { | |
1685 | set gdb_wrapper_file [lindex $result 0]; | |
1686 | set gdb_wrapper_flags [lindex $result 1]; | |
1687 | } else { | |
1688 | warning "Status wrapper failed to build." | |
1689 | } | |
1690 | } | |
1691 | set gdb_wrapper_initialized 1 | |
1692 | } | |
1693 | ||
f747e0ce PA |
1694 | # Some targets need to always link a special object in. Save its path here. |
1695 | global gdb_saved_set_unbuffered_mode_obj | |
1696 | set gdb_saved_set_unbuffered_mode_obj "" | |
1697 | ||
c906108c SS |
1698 | proc gdb_compile {source dest type options} { |
1699 | global GDB_TESTCASE_OPTIONS; | |
f1c47eb2 MS |
1700 | global gdb_wrapper_file; |
1701 | global gdb_wrapper_flags; | |
1702 | global gdb_wrapper_initialized; | |
f747e0ce PA |
1703 | global srcdir |
1704 | global objdir | |
1705 | global gdb_saved_set_unbuffered_mode_obj | |
c906108c | 1706 | |
695e2681 MK |
1707 | set outdir [file dirname $dest] |
1708 | ||
1709 | # Add platform-specific options if a shared library was specified using | |
1710 | # "shlib=librarypath" in OPTIONS. | |
1711 | set new_options "" | |
1712 | set shlib_found 0 | |
1713 | foreach opt $options { | |
57bf0e56 DJ |
1714 | if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] { |
1715 | if [test_compiler_info "xlc-*"] { | |
93f02886 DJ |
1716 | # IBM xlc compiler doesn't accept shared library named other |
1717 | # than .so: use "-Wl," to bypass this | |
1718 | lappend source "-Wl,$shlib_name" | |
1719 | } elseif { ([istarget "*-*-mingw*"] | |
1720 | || [istarget *-*-cygwin*] | |
1721 | || [istarget *-*-pe*])} { | |
1722 | lappend source "${shlib_name}.a" | |
57bf0e56 DJ |
1723 | } else { |
1724 | lappend source $shlib_name | |
1725 | } | |
1726 | if {$shlib_found == 0} { | |
1727 | set shlib_found 1 | |
1728 | if { ([test_compiler_info "gcc-*"] | |
1729 | && ([istarget "powerpc*-*-aix*"] | |
1730 | || [istarget "rs6000*-*-aix*"] )) } { | |
695e2681 | 1731 | lappend options "additional_flags=-L${outdir}" |
57bf0e56 | 1732 | } elseif { [istarget "mips-sgi-irix*"] } { |
695e2681 | 1733 | lappend options "additional_flags=-rpath ${outdir}" |
57bf0e56 DJ |
1734 | } |
1735 | } | |
b0f4b84b DJ |
1736 | } elseif { $opt == "shlib_load" } { |
1737 | if { ([istarget "*-*-mingw*"] | |
1738 | || [istarget *-*-cygwin*] | |
1739 | || [istarget *-*-pe*] | |
1740 | || [istarget arm*-*-symbianelf*] | |
1741 | || [istarget hppa*-*-hpux*])} { | |
1742 | # Do not need anything. | |
695e2681 MK |
1743 | } elseif { [istarget *-*-openbsd*] } { |
1744 | lappend new_options "additional_flags=-Wl,-rpath,${outdir}" | |
b0f4b84b DJ |
1745 | } else { |
1746 | lappend new_options "libs=-ldl" | |
1747 | lappend new_options "additional_flags=-Wl,-rpath,\\\$ORIGIN" | |
1748 | } | |
57bf0e56 DJ |
1749 | } else { |
1750 | lappend new_options $opt | |
1751 | } | |
695e2681 MK |
1752 | } |
1753 | set options $new_options | |
57bf0e56 | 1754 | |
c906108c SS |
1755 | if [target_info exists gdb_stub] { |
1756 | set options2 { "additional_flags=-Dusestubs" } | |
1757 | lappend options "libs=[target_info gdb_stub]"; | |
1758 | set options [concat $options2 $options] | |
1759 | } | |
1760 | if [target_info exists is_vxworks] { | |
1761 | set options2 { "additional_flags=-Dvxworks" } | |
1762 | lappend options "libs=[target_info gdb_stub]"; | |
1763 | set options [concat $options2 $options] | |
1764 | } | |
1765 | if [info exists GDB_TESTCASE_OPTIONS] { | |
1766 | lappend options "additional_flags=$GDB_TESTCASE_OPTIONS"; | |
1767 | } | |
1768 | verbose "options are $options" | |
1769 | verbose "source is $source $dest $type $options" | |
1770 | ||
f1c47eb2 MS |
1771 | if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init } |
1772 | ||
1773 | if {[target_info exists needs_status_wrapper] && \ | |
1774 | [target_info needs_status_wrapper] != "0" && \ | |
1775 | [info exists gdb_wrapper_file]} { | |
1776 | lappend options "libs=${gdb_wrapper_file}" | |
1777 | lappend options "ldflags=${gdb_wrapper_flags}" | |
1778 | } | |
1779 | ||
fc91c6c2 PB |
1780 | # Replace the "nowarnings" option with the appropriate additional_flags |
1781 | # to disable compiler warnings. | |
1782 | set nowarnings [lsearch -exact $options nowarnings] | |
1783 | if {$nowarnings != -1} { | |
1784 | if [target_info exists gdb,nowarnings_flag] { | |
1785 | set flag "additional_flags=[target_info gdb,nowarnings_flag]" | |
1786 | } else { | |
1787 | set flag "additional_flags=-w" | |
1788 | } | |
1789 | set options [lreplace $options $nowarnings $nowarnings $flag] | |
1790 | } | |
1791 | ||
f747e0ce PA |
1792 | if { $type == "executable" } { |
1793 | if { ([istarget "*-*-mingw*"] | |
56643c5e | 1794 | || [istarget "*-*-*djgpp"] |
f747e0ce PA |
1795 | || [istarget "*-*-cygwin*"])} { |
1796 | # Force output to unbuffered mode, by linking in an object file | |
1797 | # with a global contructor that calls setvbuf. | |
1798 | # | |
1799 | # Compile the special object seperatelly for two reasons: | |
1800 | # 1) Insulate it from $options. | |
1801 | # 2) Avoid compiling it for every gdb_compile invocation, | |
1802 | # which is time consuming, especially if we're remote | |
1803 | # host testing. | |
1804 | # | |
1805 | if { $gdb_saved_set_unbuffered_mode_obj == "" } { | |
1806 | verbose "compiling gdb_saved_set_unbuffered_obj" | |
1807 | set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c | |
1808 | set unbuf_obj ${objdir}/set_unbuffered_mode.o | |
1809 | ||
1810 | set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}] | |
1811 | if { $result != "" } { | |
1812 | return $result | |
1813 | } | |
1814 | ||
1815 | set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o | |
1816 | # Link a copy of the output object, because the | |
1817 | # original may be automatically deleted. | |
1818 | remote_exec host "cp -f $unbuf_obj $gdb_saved_set_unbuffered_mode_obj" | |
1819 | } else { | |
1820 | verbose "gdb_saved_set_unbuffered_obj already compiled" | |
1821 | } | |
1822 | ||
1823 | # Rely on the internal knowledge that the global ctors are ran in | |
1824 | # reverse link order. In that case, we can use ldflags to | |
1825 | # avoid copying the object file to the host multiple | |
1826 | # times. | |
ace5c364 PM |
1827 | # This object can only be added if standard libraries are |
1828 | # used. Thus, we need to disable it if -nostdlib option is used | |
1829 | if {[lsearch -regexp $options "-nostdlib"] < 0 } { | |
1830 | lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj" | |
1831 | } | |
f747e0ce PA |
1832 | } |
1833 | } | |
1834 | ||
c906108c | 1835 | set result [target_compile $source $dest $type $options]; |
93f02886 DJ |
1836 | |
1837 | # Prune uninteresting compiler (and linker) output. | |
1838 | regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result | |
1839 | ||
c906108c SS |
1840 | regsub "\[\r\n\]*$" "$result" "" result; |
1841 | regsub "^\[\r\n\]*" "$result" "" result; | |
93f02886 | 1842 | |
81d2cbae NS |
1843 | if { $result != "" && [lsearch $options quiet] == -1} { |
1844 | clone_output "gdb compile failed, $result" | |
c906108c SS |
1845 | } |
1846 | return $result; | |
1847 | } | |
1848 | ||
b6ff0e81 JB |
1849 | |
1850 | # This is just like gdb_compile, above, except that it tries compiling | |
1851 | # against several different thread libraries, to see which one this | |
1852 | # system has. | |
1853 | proc gdb_compile_pthreads {source dest type options} { | |
0ae67eb3 | 1854 | set built_binfile 0 |
b6ff0e81 JB |
1855 | set why_msg "unrecognized error" |
1856 | foreach lib {-lpthreads -lpthread -lthread} { | |
1857 | # This kind of wipes out whatever libs the caller may have | |
1858 | # set. Or maybe theirs will override ours. How infelicitous. | |
b5ab8ff3 | 1859 | set options_with_lib [concat $options [list libs=$lib quiet]] |
b6ff0e81 JB |
1860 | set ccout [gdb_compile $source $dest $type $options_with_lib] |
1861 | switch -regexp -- $ccout { | |
1862 | ".*no posix threads support.*" { | |
1863 | set why_msg "missing threads include file" | |
1864 | break | |
1865 | } | |
1866 | ".*cannot open -lpthread.*" { | |
1867 | set why_msg "missing runtime threads library" | |
1868 | } | |
1869 | ".*Can't find library for -lpthread.*" { | |
1870 | set why_msg "missing runtime threads library" | |
1871 | } | |
1872 | {^$} { | |
1873 | pass "successfully compiled posix threads test case" | |
1874 | set built_binfile 1 | |
1875 | break | |
1876 | } | |
1877 | } | |
1878 | } | |
0ae67eb3 | 1879 | if {!$built_binfile} { |
b6ff0e81 JB |
1880 | unsupported "Couldn't compile $source: ${why_msg}" |
1881 | return -1 | |
1882 | } | |
57bf0e56 DJ |
1883 | } |
1884 | ||
1885 | # Build a shared library from SOURCES. You must use get_compiler_info | |
1886 | # first. | |
1887 | ||
1888 | proc gdb_compile_shlib {sources dest options} { | |
1889 | set obj_options $options | |
1890 | ||
1891 | switch -glob [test_compiler_info] { | |
1892 | "xlc-*" { | |
1893 | lappend obj_options "additional_flags=-qpic" | |
1894 | } | |
1895 | "gcc-*" { | |
1896 | if { !([istarget "powerpc*-*-aix*"] | |
227c54da DJ |
1897 | || [istarget "rs6000*-*-aix*"] |
1898 | || [istarget "*-*-cygwin*"] | |
1899 | || [istarget "*-*-mingw*"] | |
1900 | || [istarget "*-*-pe*"]) } { | |
57bf0e56 DJ |
1901 | lappend obj_options "additional_flags=-fpic" |
1902 | } | |
1903 | } | |
1904 | default { | |
1905 | switch -glob [istarget] { | |
1906 | "hppa*-hp-hpux*" { | |
1907 | lappend obj_options "additional_flags=+z" | |
1908 | } | |
1909 | "mips-sgi-irix*" { | |
1910 | # Disable SGI compiler's implicit -Dsgi | |
1911 | lappend obj_options "additional_flags=-Usgi" | |
1912 | } | |
1913 | default { | |
1914 | # don't know what the compiler is... | |
1915 | } | |
1916 | } | |
1917 | } | |
1918 | } | |
1919 | ||
1920 | set outdir [file dirname $dest] | |
1921 | set objects "" | |
1922 | foreach source $sources { | |
1923 | set sourcebase [file tail $source] | |
1924 | if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} { | |
1925 | return -1 | |
1926 | } | |
1927 | lappend objects ${outdir}/${sourcebase}.o | |
1928 | } | |
1929 | ||
1930 | if [istarget "hppa*-*-hpux*"] { | |
1931 | remote_exec build "ld -b ${objects} -o ${dest}" | |
1932 | } else { | |
1933 | set link_options $options | |
1934 | if [test_compiler_info "xlc-*"] { | |
1935 | lappend link_options "additional_flags=-qmkshrobj" | |
1936 | } else { | |
1937 | lappend link_options "additional_flags=-shared" | |
93f02886 DJ |
1938 | |
1939 | if { ([istarget "*-*-mingw*"] | |
1940 | || [istarget *-*-cygwin*] | |
1941 | || [istarget *-*-pe*])} { | |
1942 | lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a" | |
1943 | } | |
57bf0e56 DJ |
1944 | } |
1945 | if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} { | |
1946 | return -1 | |
1947 | } | |
1948 | } | |
b6ff0e81 JB |
1949 | } |
1950 | ||
130cacce AF |
1951 | # This is just like gdb_compile_pthreads, above, except that we always add the |
1952 | # objc library for compiling Objective-C programs | |
1953 | proc gdb_compile_objc {source dest type options} { | |
1954 | set built_binfile 0 | |
1955 | set why_msg "unrecognized error" | |
1956 | foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} { | |
1957 | # This kind of wipes out whatever libs the caller may have | |
1958 | # set. Or maybe theirs will override ours. How infelicitous. | |
1959 | if { $lib == "solaris" } { | |
1960 | set lib "-lpthread -lposix4" | |
1961 | } | |
1962 | if { $lib != "-lobjc" } { | |
1963 | set lib "-lobjc $lib" | |
1964 | } | |
1965 | set options_with_lib [concat $options [list libs=$lib quiet]] | |
1966 | set ccout [gdb_compile $source $dest $type $options_with_lib] | |
1967 | switch -regexp -- $ccout { | |
1968 | ".*no posix threads support.*" { | |
1969 | set why_msg "missing threads include file" | |
1970 | break | |
1971 | } | |
1972 | ".*cannot open -lpthread.*" { | |
1973 | set why_msg "missing runtime threads library" | |
1974 | } | |
1975 | ".*Can't find library for -lpthread.*" { | |
1976 | set why_msg "missing runtime threads library" | |
1977 | } | |
1978 | {^$} { | |
1979 | pass "successfully compiled objc with posix threads test case" | |
1980 | set built_binfile 1 | |
1981 | break | |
1982 | } | |
1983 | } | |
1984 | } | |
1985 | if {!$built_binfile} { | |
1986 | unsupported "Couldn't compile $source: ${why_msg}" | |
1987 | return -1 | |
1988 | } | |
1989 | } | |
1990 | ||
c906108c SS |
1991 | proc send_gdb { string } { |
1992 | global suppress_flag; | |
1993 | if { $suppress_flag } { | |
1994 | return "suppressed"; | |
1995 | } | |
1996 | return [remote_send host "$string"]; | |
1997 | } | |
1998 | ||
1999 | # | |
2000 | # | |
2001 | ||
2002 | proc gdb_expect { args } { | |
2003 | if { [llength $args] == 2 && [lindex $args 0] != "-re" } { | |
2f34202f | 2004 | set atimeout [lindex $args 0]; |
c906108c SS |
2005 | set expcode [list [lindex $args 1]]; |
2006 | } else { | |
c906108c | 2007 | set expcode $args; |
2f34202f MR |
2008 | } |
2009 | ||
2010 | upvar timeout timeout; | |
2011 | ||
2012 | if [target_info exists gdb,timeout] { | |
2013 | if [info exists timeout] { | |
2014 | if { $timeout < [target_info gdb,timeout] } { | |
c906108c | 2015 | set gtimeout [target_info gdb,timeout]; |
2f34202f MR |
2016 | } else { |
2017 | set gtimeout $timeout; | |
c906108c | 2018 | } |
2f34202f MR |
2019 | } else { |
2020 | set gtimeout [target_info gdb,timeout]; | |
c906108c | 2021 | } |
2f34202f | 2022 | } |
c906108c | 2023 | |
2f34202f MR |
2024 | if ![info exists gtimeout] { |
2025 | global timeout; | |
2026 | if [info exists timeout] { | |
2027 | set gtimeout $timeout; | |
2028 | } | |
2029 | } | |
2030 | ||
2031 | if [info exists atimeout] { | |
2032 | if { ![info exists gtimeout] || $gtimeout < $atimeout } { | |
2033 | set $gtimeout $atimeout; | |
2034 | } | |
2035 | } else { | |
c906108c | 2036 | if ![info exists gtimeout] { |
2f34202f MR |
2037 | # Eeeeew. |
2038 | set gtimeout 60; | |
c906108c SS |
2039 | } |
2040 | } | |
2f34202f | 2041 | |
c906108c SS |
2042 | global suppress_flag; |
2043 | global remote_suppress_flag; | |
2044 | if [info exists remote_suppress_flag] { | |
2045 | set old_val $remote_suppress_flag; | |
2046 | } | |
2047 | if [info exists suppress_flag] { | |
2048 | if { $suppress_flag } { | |
2049 | set remote_suppress_flag 1; | |
2050 | } | |
2051 | } | |
a0b3c4fd | 2052 | set code [catch \ |
5f279fa6 | 2053 | {uplevel remote_expect host $gtimeout $expcode} string]; |
c906108c SS |
2054 | if [info exists old_val] { |
2055 | set remote_suppress_flag $old_val; | |
2056 | } else { | |
2057 | if [info exists remote_suppress_flag] { | |
2058 | unset remote_suppress_flag; | |
2059 | } | |
2060 | } | |
2061 | ||
2062 | if {$code == 1} { | |
2063 | global errorInfo errorCode; | |
2064 | ||
2065 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string | |
2066 | } elseif {$code == 2} { | |
2067 | return -code return $string | |
2068 | } elseif {$code == 3} { | |
2069 | return | |
2070 | } elseif {$code > 4} { | |
2071 | return -code $code $string | |
2072 | } | |
2073 | } | |
2074 | ||
c2d11a7d | 2075 | # gdb_expect_list MESSAGE SENTINEL LIST -- expect a sequence of outputs |
085dd6e6 JM |
2076 | # |
2077 | # Check for long sequence of output by parts. | |
11cf8741 | 2078 | # MESSAGE: is the test message to be printed with the test success/fail. |
085dd6e6 JM |
2079 | # SENTINEL: Is the terminal pattern indicating that output has finished. |
2080 | # LIST: is the sequence of outputs to match. | |
2081 | # If the sentinel is recognized early, it is considered an error. | |
2082 | # | |
11cf8741 JM |
2083 | # Returns: |
2084 | # 1 if the test failed, | |
2085 | # 0 if the test passes, | |
2086 | # -1 if there was an internal error. | |
2087 | # | |
c2d11a7d | 2088 | proc gdb_expect_list {test sentinel list} { |
085dd6e6 | 2089 | global gdb_prompt |
11cf8741 | 2090 | global suppress_flag |
085dd6e6 | 2091 | set index 0 |
43ff13b4 | 2092 | set ok 1 |
11cf8741 JM |
2093 | if { $suppress_flag } { |
2094 | set ok 0 | |
a20ce2c3 | 2095 | unresolved "${test}" |
11cf8741 | 2096 | } |
43ff13b4 | 2097 | while { ${index} < [llength ${list}] } { |
085dd6e6 JM |
2098 | set pattern [lindex ${list} ${index}] |
2099 | set index [expr ${index} + 1] | |
2100 | if { ${index} == [llength ${list}] } { | |
43ff13b4 JM |
2101 | if { ${ok} } { |
2102 | gdb_expect { | |
c2d11a7d | 2103 | -re "${pattern}${sentinel}" { |
a20ce2c3 | 2104 | # pass "${test}, pattern ${index} + sentinel" |
c2d11a7d JM |
2105 | } |
2106 | -re "${sentinel}" { | |
a20ce2c3 | 2107 | fail "${test} (pattern ${index} + sentinel)" |
c2d11a7d | 2108 | set ok 0 |
43ff13b4 | 2109 | } |
5c5455dc AC |
2110 | -re ".*A problem internal to GDB has been detected" { |
2111 | fail "${test} (GDB internal error)" | |
2112 | set ok 0 | |
2113 | gdb_internal_error_resync | |
2114 | } | |
43ff13b4 | 2115 | timeout { |
a20ce2c3 | 2116 | fail "${test} (pattern ${index} + sentinel) (timeout)" |
43ff13b4 JM |
2117 | set ok 0 |
2118 | } | |
085dd6e6 | 2119 | } |
43ff13b4 | 2120 | } else { |
a20ce2c3 | 2121 | # unresolved "${test}, pattern ${index} + sentinel" |
085dd6e6 JM |
2122 | } |
2123 | } else { | |
43ff13b4 JM |
2124 | if { ${ok} } { |
2125 | gdb_expect { | |
2126 | -re "${pattern}" { | |
a20ce2c3 | 2127 | # pass "${test}, pattern ${index}" |
43ff13b4 | 2128 | } |
c2d11a7d | 2129 | -re "${sentinel}" { |
a20ce2c3 | 2130 | fail "${test} (pattern ${index})" |
43ff13b4 JM |
2131 | set ok 0 |
2132 | } | |
5c5455dc AC |
2133 | -re ".*A problem internal to GDB has been detected" { |
2134 | fail "${test} (GDB internal error)" | |
2135 | set ok 0 | |
2136 | gdb_internal_error_resync | |
2137 | } | |
43ff13b4 | 2138 | timeout { |
a20ce2c3 | 2139 | fail "${test} (pattern ${index}) (timeout)" |
43ff13b4 JM |
2140 | set ok 0 |
2141 | } | |
085dd6e6 | 2142 | } |
43ff13b4 | 2143 | } else { |
a20ce2c3 | 2144 | # unresolved "${test}, pattern ${index}" |
085dd6e6 JM |
2145 | } |
2146 | } | |
2147 | } | |
11cf8741 | 2148 | if { ${ok} } { |
a20ce2c3 | 2149 | pass "${test}" |
11cf8741 JM |
2150 | return 0 |
2151 | } else { | |
2152 | return 1 | |
2153 | } | |
085dd6e6 JM |
2154 | } |
2155 | ||
2156 | # | |
2157 | # | |
c906108c SS |
2158 | proc gdb_suppress_entire_file { reason } { |
2159 | global suppress_flag; | |
2160 | ||
2161 | warning "$reason\n"; | |
2162 | set suppress_flag -1; | |
2163 | } | |
2164 | ||
2165 | # | |
2166 | # Set suppress_flag, which will cause all subsequent calls to send_gdb and | |
2167 | # gdb_expect to fail immediately (until the next call to | |
2168 | # gdb_stop_suppressing_tests). | |
2169 | # | |
2170 | proc gdb_suppress_tests { args } { | |
2171 | global suppress_flag; | |
2172 | ||
2173 | return; # fnf - disable pending review of results where | |
2174 | # testsuite ran better without this | |
2175 | incr suppress_flag; | |
2176 | ||
2177 | if { $suppress_flag == 1 } { | |
2178 | if { [llength $args] > 0 } { | |
2179 | warning "[lindex $args 0]\n"; | |
2180 | } else { | |
2181 | warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n"; | |
2182 | } | |
2183 | } | |
2184 | } | |
2185 | ||
2186 | # | |
2187 | # Clear suppress_flag. | |
2188 | # | |
2189 | proc gdb_stop_suppressing_tests { } { | |
2190 | global suppress_flag; | |
2191 | ||
2192 | if [info exists suppress_flag] { | |
2193 | if { $suppress_flag > 0 } { | |
2194 | set suppress_flag 0; | |
2195 | clone_output "Tests restarted.\n"; | |
2196 | } | |
2197 | } else { | |
2198 | set suppress_flag 0; | |
2199 | } | |
2200 | } | |
2201 | ||
2202 | proc gdb_clear_suppressed { } { | |
2203 | global suppress_flag; | |
2204 | ||
2205 | set suppress_flag 0; | |
2206 | } | |
2207 | ||
2208 | proc gdb_start { } { | |
2209 | default_gdb_start | |
2210 | } | |
2211 | ||
2212 | proc gdb_exit { } { | |
2213 | catch default_gdb_exit | |
2214 | } | |
2215 | ||
e63b55d1 NS |
2216 | # |
2217 | # gdb_load_cmd -- load a file into the debugger. | |
2218 | # ARGS - additional args to load command. | |
2219 | # return a -1 if anything goes wrong. | |
2220 | # | |
2221 | proc gdb_load_cmd { args } { | |
2222 | global gdb_prompt | |
2223 | ||
2224 | if [target_info exists gdb_load_timeout] { | |
2225 | set loadtimeout [target_info gdb_load_timeout] | |
2226 | } else { | |
2227 | set loadtimeout 1600 | |
2228 | } | |
2229 | send_gdb "load $args\n" | |
e91528f0 | 2230 | verbose "Timeout is now $loadtimeout seconds" 2 |
e63b55d1 NS |
2231 | gdb_expect $loadtimeout { |
2232 | -re "Loading section\[^\r\]*\r\n" { | |
2233 | exp_continue | |
2234 | } | |
2235 | -re "Start address\[\r\]*\r\n" { | |
2236 | exp_continue | |
2237 | } | |
2238 | -re "Transfer rate\[\r\]*\r\n" { | |
2239 | exp_continue | |
2240 | } | |
2241 | -re "Memory access error\[^\r\]*\r\n" { | |
2242 | perror "Failed to load program" | |
2243 | return -1 | |
2244 | } | |
2245 | -re "$gdb_prompt $" { | |
2246 | return 0 | |
2247 | } | |
2248 | -re "(.*)\r\n$gdb_prompt " { | |
2249 | perror "Unexpected reponse from 'load' -- $expect_out(1,string)" | |
2250 | return -1 | |
2251 | } | |
2252 | timeout { | |
c4b347c7 | 2253 | perror "Timed out trying to load $args." |
e63b55d1 NS |
2254 | return -1 |
2255 | } | |
2256 | } | |
2257 | return -1 | |
2258 | } | |
2259 | ||
93f02886 DJ |
2260 | # gdb_download |
2261 | # | |
2262 | # Copy a file to the remote target and return its target filename. | |
2263 | # Schedule the file to be deleted at the end of this test. | |
2264 | ||
2265 | proc gdb_download { filename } { | |
2266 | global cleanfiles | |
2267 | ||
2268 | set destname [remote_download target $filename] | |
2269 | lappend cleanfiles $destname | |
2270 | return $destname | |
2271 | } | |
2272 | ||
2273 | # gdb_load_shlibs LIB... | |
2274 | # | |
2275 | # Copy the listed libraries to the target. | |
2276 | ||
2277 | proc gdb_load_shlibs { args } { | |
2278 | if {![is_remote target]} { | |
2279 | return | |
2280 | } | |
2281 | ||
2282 | foreach file $args { | |
2283 | gdb_download $file | |
2284 | } | |
2285 | ||
2286 | # Even if the target supplies full paths for shared libraries, | |
2287 | # they may not be paths for this system. | |
2288 | gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "" "" | |
2289 | } | |
2290 | ||
c906108c SS |
2291 | # |
2292 | # gdb_load -- load a file into the debugger. | |
2db8e78e | 2293 | # Many files in config/*.exp override this procedure. |
c906108c SS |
2294 | # |
2295 | proc gdb_load { arg } { | |
2296 | return [gdb_file_cmd $arg] | |
2297 | } | |
2298 | ||
b741e217 DJ |
2299 | # gdb_reload -- load a file into the target. Called before "running", |
2300 | # either the first time or after already starting the program once, | |
2301 | # for remote targets. Most files that override gdb_load should now | |
2302 | # override this instead. | |
2303 | ||
2304 | proc gdb_reload { } { | |
2305 | # For the benefit of existing configurations, default to gdb_load. | |
2306 | # Specifying no file defaults to the executable currently being | |
2307 | # debugged. | |
2308 | return [gdb_load ""] | |
2309 | } | |
2310 | ||
c906108c SS |
2311 | proc gdb_continue { function } { |
2312 | global decimal | |
2313 | ||
2314 | return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"]; | |
2315 | } | |
2316 | ||
2317 | proc default_gdb_init { args } { | |
277254ba | 2318 | global gdb_wrapper_initialized |
93f02886 | 2319 | global cleanfiles |
277254ba | 2320 | |
93f02886 DJ |
2321 | set cleanfiles {} |
2322 | ||
c906108c SS |
2323 | gdb_clear_suppressed; |
2324 | ||
277254ba MS |
2325 | # Make sure that the wrapper is rebuilt |
2326 | # with the appropriate multilib option. | |
2327 | set gdb_wrapper_initialized 0 | |
2328 | ||
7b433602 JB |
2329 | # Unlike most tests, we have a small number of tests that generate |
2330 | # a very large amount of output. We therefore increase the expect | |
2331 | # buffer size to be able to contain the entire test output. | |
2332 | match_max -d 30000 | |
c906108c SS |
2333 | |
2334 | # We want to add the name of the TCL testcase to the PASS/FAIL messages. | |
2335 | if { [llength $args] > 0 } { | |
2336 | global pf_prefix | |
2337 | ||
2338 | set file [lindex $args 0]; | |
2339 | ||
2340 | set pf_prefix "[file tail [file dirname $file]]/[file tail $file]:"; | |
2341 | } | |
2342 | global gdb_prompt; | |
2343 | if [target_info exists gdb_prompt] { | |
2344 | set gdb_prompt [target_info gdb_prompt]; | |
2345 | } else { | |
2346 | set gdb_prompt "\\(gdb\\)" | |
2347 | } | |
2348 | } | |
2349 | ||
2350 | proc gdb_init { args } { | |
2351 | return [eval default_gdb_init $args]; | |
2352 | } | |
2353 | ||
2354 | proc gdb_finish { } { | |
93f02886 DJ |
2355 | global cleanfiles |
2356 | ||
2357 | # Exit first, so that the files are no longer in use. | |
2358 | gdb_exit | |
2359 | ||
2360 | if { [llength $cleanfiles] > 0 } { | |
2361 | eval remote_file target delete $cleanfiles | |
2362 | set cleanfiles {} | |
2363 | } | |
c906108c SS |
2364 | } |
2365 | ||
2366 | global debug_format | |
7a292a7a | 2367 | set debug_format "unknown" |
c906108c SS |
2368 | |
2369 | # Run the gdb command "info source" and extract the debugging format | |
2370 | # information from the output and save it in debug_format. | |
2371 | ||
2372 | proc get_debug_format { } { | |
2373 | global gdb_prompt | |
2374 | global verbose | |
2375 | global expect_out | |
2376 | global debug_format | |
2377 | ||
2378 | set debug_format "unknown" | |
2379 | send_gdb "info source\n" | |
2380 | gdb_expect 10 { | |
919d772c | 2381 | -re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" { |
c906108c SS |
2382 | set debug_format $expect_out(1,string) |
2383 | verbose "debug format is $debug_format" | |
2384 | return 1; | |
2385 | } | |
2386 | -re "No current source file.\r\n$gdb_prompt $" { | |
2387 | perror "get_debug_format used when no current source file" | |
2388 | return 0; | |
2389 | } | |
2390 | -re "$gdb_prompt $" { | |
2391 | warning "couldn't check debug format (no valid response)." | |
2392 | return 1; | |
2393 | } | |
2394 | timeout { | |
2395 | warning "couldn't check debug format (timed out)." | |
2396 | return 1; | |
2397 | } | |
2398 | } | |
2399 | } | |
2400 | ||
838ae6c4 JB |
2401 | # Return true if FORMAT matches the debug format the current test was |
2402 | # compiled with. FORMAT is a shell-style globbing pattern; it can use | |
2403 | # `*', `[...]', and so on. | |
2404 | # | |
2405 | # This function depends on variables set by `get_debug_format', above. | |
2406 | ||
2407 | proc test_debug_format {format} { | |
2408 | global debug_format | |
2409 | ||
2410 | return [expr [string match $format $debug_format] != 0] | |
2411 | } | |
2412 | ||
c906108c SS |
2413 | # Like setup_xfail, but takes the name of a debug format (DWARF 1, |
2414 | # COFF, stabs, etc). If that format matches the format that the | |
2415 | # current test was compiled with, then the next test is expected to | |
2416 | # fail for any target. Returns 1 if the next test or set of tests is | |
2417 | # expected to fail, 0 otherwise (or if it is unknown). Must have | |
2418 | # previously called get_debug_format. | |
b55a4771 | 2419 | proc setup_xfail_format { format } { |
838ae6c4 | 2420 | set ret [test_debug_format $format]; |
b55a4771 | 2421 | |
838ae6c4 | 2422 | if {$ret} then { |
b55a4771 MS |
2423 | setup_xfail "*-*-*" |
2424 | } | |
2425 | return $ret; | |
2426 | } | |
c906108c SS |
2427 | |
2428 | proc gdb_step_for_stub { } { | |
2429 | global gdb_prompt; | |
2430 | ||
2431 | if ![target_info exists gdb,use_breakpoint_for_stub] { | |
2432 | if [target_info exists gdb_stub_step_command] { | |
2433 | set command [target_info gdb_stub_step_command]; | |
2434 | } else { | |
2435 | set command "step"; | |
2436 | } | |
2437 | send_gdb "${command}\n"; | |
2438 | set tries 0; | |
2439 | gdb_expect 60 { | |
2440 | -re "(main.* at |.*in .*start).*$gdb_prompt" { | |
2441 | return; | |
2442 | } | |
2443 | -re ".*$gdb_prompt" { | |
2444 | incr tries; | |
2445 | if { $tries == 5 } { | |
2446 | fail "stepping out of breakpoint function"; | |
2447 | return; | |
2448 | } | |
2449 | send_gdb "${command}\n"; | |
2450 | exp_continue; | |
2451 | } | |
2452 | default { | |
2453 | fail "stepping out of breakpoint function"; | |
2454 | return; | |
2455 | } | |
2456 | } | |
2457 | } | |
2458 | send_gdb "where\n"; | |
2459 | gdb_expect { | |
2460 | -re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" { | |
2461 | set file $expect_out(1,string); | |
2462 | set linenum [expr $expect_out(2,string) + 1]; | |
2463 | set breakplace "${file}:${linenum}"; | |
2464 | } | |
2465 | default {} | |
2466 | } | |
2467 | send_gdb "break ${breakplace}\n"; | |
2468 | gdb_expect 60 { | |
2469 | -re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" { | |
2470 | set breakpoint $expect_out(1,string); | |
2471 | } | |
2472 | -re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" { | |
2473 | set breakpoint $expect_out(1,string); | |
2474 | } | |
2475 | default {} | |
2476 | } | |
2477 | send_gdb "continue\n"; | |
2478 | gdb_expect 60 { | |
2479 | -re "Breakpoint ${breakpoint},.*$gdb_prompt" { | |
2480 | gdb_test "delete $breakpoint" ".*" ""; | |
2481 | return; | |
2482 | } | |
2483 | default {} | |
2484 | } | |
2485 | } | |
2486 | ||
c6fee705 MC |
2487 | # gdb_get_line_number TEXT [FILE] |
2488 | # | |
2489 | # Search the source file FILE, and return the line number of the | |
2490 | # first line containing TEXT. If no match is found, return -1. | |
2491 | # | |
2492 | # TEXT is a string literal, not a regular expression. | |
2493 | # | |
2494 | # The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is | |
2495 | # specified, and does not start with "/", then it is assumed to be in | |
2496 | # "$srcdir/$subdir". This is awkward, and can be fixed in the future, | |
2497 | # by changing the callers and the interface at the same time. | |
2498 | # In particular: gdb.base/break.exp, gdb.base/condbreak.exp, | |
2499 | # gdb.base/ena-dis-br.exp. | |
2500 | # | |
2501 | # Use this function to keep your test scripts independent of the | |
2502 | # exact line numbering of the source file. Don't write: | |
2503 | # | |
2504 | # send_gdb "break 20" | |
2505 | # | |
2506 | # This means that if anyone ever edits your test's source file, | |
2507 | # your test could break. Instead, put a comment like this on the | |
2508 | # source file line you want to break at: | |
2509 | # | |
2510 | # /* breakpoint spot: frotz.exp: test name */ | |
2511 | # | |
2512 | # and then write, in your test script (which we assume is named | |
2513 | # frotz.exp): | |
2514 | # | |
2515 | # send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n" | |
2516 | # | |
2517 | # (Yes, Tcl knows how to handle the nested quotes and brackets. | |
2518 | # Try this: | |
2519 | # $ tclsh | |
2520 | # % puts "foo [lindex "bar baz" 1]" | |
2521 | # foo baz | |
2522 | # % | |
2523 | # Tcl is quite clever, for a little stringy language.) | |
2524 | # | |
2525 | # === | |
2526 | # | |
2527 | # The previous implementation of this procedure used the gdb search command. | |
2528 | # This version is different: | |
2529 | # | |
2530 | # . It works with MI, and it also works when gdb is not running. | |
2531 | # | |
2532 | # . It operates on the build machine, not the host machine. | |
2533 | # | |
2534 | # . For now, this implementation fakes a current directory of | |
2535 | # $srcdir/$subdir to be compatible with the old implementation. | |
2536 | # This will go away eventually and some callers will need to | |
2537 | # be changed. | |
2538 | # | |
2539 | # . The TEXT argument is literal text and matches literally, | |
2540 | # not a regular expression as it was before. | |
2541 | # | |
2542 | # . State changes in gdb, such as changing the current file | |
2543 | # and setting $_, no longer happen. | |
2544 | # | |
2545 | # After a bit of time we can forget about the differences from the | |
2546 | # old implementation. | |
2547 | # | |
2548 | # --chastain 2004-08-05 | |
2549 | ||
2550 | proc gdb_get_line_number { text { file "" } } { | |
2551 | global srcdir | |
2552 | global subdir | |
2553 | global srcfile | |
c906108c | 2554 | |
c6fee705 MC |
2555 | if { "$file" == "" } then { |
2556 | set file "$srcfile" | |
2557 | } | |
2558 | if { ! [regexp "^/" "$file"] } then { | |
2559 | set file "$srcdir/$subdir/$file" | |
c906108c SS |
2560 | } |
2561 | ||
c6fee705 MC |
2562 | if { [ catch { set fd [open "$file"] } message ] } then { |
2563 | perror "$message" | |
2564 | return -1 | |
c906108c | 2565 | } |
c6fee705 MC |
2566 | |
2567 | set found -1 | |
2568 | for { set line 1 } { 1 } { incr line } { | |
2569 | if { [ catch { set nchar [gets "$fd" body] } message ] } then { | |
2570 | perror "$message" | |
2571 | return -1 | |
2572 | } | |
2573 | if { $nchar < 0 } then { | |
2574 | break | |
2575 | } | |
2576 | if { [string first "$text" "$body"] >= 0 } then { | |
2577 | set found $line | |
2578 | break | |
2579 | } | |
2580 | } | |
2581 | ||
2582 | if { [ catch { close "$fd" } message ] } then { | |
2583 | perror "$message" | |
2584 | return -1 | |
2585 | } | |
2586 | ||
2587 | return $found | |
c906108c SS |
2588 | } |
2589 | ||
7a292a7a SS |
2590 | # gdb_continue_to_end: |
2591 | # The case where the target uses stubs has to be handled specially. If a | |
2592 | # stub is used, we set a breakpoint at exit because we cannot rely on | |
2593 | # exit() behavior of a remote target. | |
2594 | # | |
2595 | # mssg is the error message that gets printed. | |
2596 | ||
2597 | proc gdb_continue_to_end {mssg} { | |
2598 | if [target_info exists use_gdb_stub] { | |
2599 | if {![gdb_breakpoint "exit"]} { | |
2600 | return 0 | |
2601 | } | |
2602 | gdb_test "continue" "Continuing..*Breakpoint .*exit.*" \ | |
2603 | "continue until exit at $mssg" | |
2604 | } else { | |
2605 | # Continue until we exit. Should not stop again. | |
2606 | # Don't bother to check the output of the program, that may be | |
2607 | # extremely tough for some remote systems. | |
2608 | gdb_test "continue"\ | |
1c56143a | 2609 | "Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\ |
7a292a7a SS |
2610 | "continue until exit at $mssg" |
2611 | } | |
2612 | } | |
2613 | ||
2614 | proc rerun_to_main {} { | |
2615 | global gdb_prompt | |
2616 | ||
2617 | if [target_info exists use_gdb_stub] { | |
2618 | gdb_run_cmd | |
2619 | gdb_expect { | |
2620 | -re ".*Breakpoint .*main .*$gdb_prompt $"\ | |
2621 | {pass "rerun to main" ; return 0} | |
2622 | -re "$gdb_prompt $"\ | |
2623 | {fail "rerun to main" ; return 0} | |
2624 | timeout {fail "(timeout) rerun to main" ; return 0} | |
2625 | } | |
2626 | } else { | |
2627 | send_gdb "run\n" | |
2628 | gdb_expect { | |
11350d2a CV |
2629 | -re "The program .* has been started already.*y or n. $" { |
2630 | send_gdb "y\n" | |
2631 | exp_continue | |
2632 | } | |
7a292a7a SS |
2633 | -re "Starting program.*$gdb_prompt $"\ |
2634 | {pass "rerun to main" ; return 0} | |
2635 | -re "$gdb_prompt $"\ | |
2636 | {fail "rerun to main" ; return 0} | |
2637 | timeout {fail "(timeout) rerun to main" ; return 0} | |
2638 | } | |
2639 | } | |
2640 | } | |
c906108c | 2641 | |
13a5e3b8 MS |
2642 | # Print a message and return true if a test should be skipped |
2643 | # due to lack of floating point suport. | |
2644 | ||
2645 | proc gdb_skip_float_test { msg } { | |
2646 | if [target_info exists gdb,skip_float_tests] { | |
2647 | verbose "Skipping test '$msg': no float tests."; | |
2648 | return 1; | |
2649 | } | |
2650 | return 0; | |
2651 | } | |
2652 | ||
2653 | # Print a message and return true if a test should be skipped | |
2654 | # due to lack of stdio support. | |
2655 | ||
2656 | proc gdb_skip_stdio_test { msg } { | |
2657 | if [target_info exists gdb,noinferiorio] { | |
2658 | verbose "Skipping test '$msg': no inferior i/o."; | |
2659 | return 1; | |
2660 | } | |
2661 | return 0; | |
2662 | } | |
2663 | ||
2664 | proc gdb_skip_bogus_test { msg } { | |
2665 | return 0; | |
2666 | } | |
2667 | ||
e515b470 DJ |
2668 | # Return true if a test should be skipped due to lack of XML support |
2669 | # in the host GDB. | |
2670 | ||
2671 | proc gdb_skip_xml_test { } { | |
2672 | global gdb_prompt | |
2673 | global srcdir | |
2674 | global xml_missing_cached | |
2675 | ||
2676 | if {[info exists xml_missing_cached]} { | |
2677 | return $xml_missing_cached | |
2678 | } | |
2679 | ||
2680 | gdb_start | |
2681 | set xml_missing_cached 0 | |
2682 | gdb_test_multiple "set tdesc filename ${srcdir}/gdb.xml/trivial.xml" "" { | |
2683 | -re ".*XML support was disabled at compile time.*$gdb_prompt $" { | |
2684 | set xml_missing_cached 1 | |
2685 | } | |
2686 | -re ".*$gdb_prompt $" { } | |
2687 | } | |
2688 | gdb_exit | |
2689 | return $xml_missing_cached | |
2690 | } | |
1f8a6abb EZ |
2691 | |
2692 | # Note: the procedure gdb_gnu_strip_debug will produce an executable called | |
2693 | # ${binfile}.dbglnk, which is just like the executable ($binfile) but without | |
2694 | # the debuginfo. Instead $binfile has a .gnu_debuglink section which contains | |
94277a38 | 2695 | # the name of a debuginfo only file. This file will be stored in the |
1f8a6abb EZ |
2696 | # gdb.base/.debug subdirectory. |
2697 | ||
2698 | # Functions for separate debug info testing | |
2699 | ||
2700 | # starting with an executable: | |
2701 | # foo --> original executable | |
2702 | ||
2703 | # at the end of the process we have: | |
2704 | # foo.stripped --> foo w/o debug info | |
2705 | # .debug/foo.debug --> foo's debug info | |
2706 | # foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug. | |
2707 | ||
2708 | # Return the name of the file in which we should stor EXEC's separated | |
2709 | # debug info. EXEC contains the full path. | |
2710 | proc separate_debug_filename { exec } { | |
2711 | ||
2712 | # In a .debug subdirectory off the same directory where the testcase | |
2713 | # executable is going to be. Something like: | |
2714 | # <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug. | |
2715 | # This is the default location where gdb expects to findi | |
2716 | # the debug info file. | |
2717 | ||
2718 | set exec_dir [file dirname $exec] | |
2719 | set exec_file [file tail $exec] | |
2720 | set debug_dir [file join $exec_dir ".debug"] | |
2721 | set debug_file [file join $debug_dir "${exec_file}.debug"] | |
2722 | ||
2723 | return $debug_file | |
2724 | } | |
2725 | ||
4935890f JK |
2726 | # Return the build-id hex string (usually 160 bits as 40 hex characters) |
2727 | # converted to the form: .build-id/ab/cdef1234...89.debug | |
2728 | # Return "" if no build-id found. | |
2729 | proc build_id_debug_filename_get { exec } { | |
2730 | set tmp "${exec}-tmp" | |
8b3fc8d8 MK |
2731 | set objcopy_program [transform objcopy] |
2732 | ||
2733 | set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $exec $tmp" output] | |
2734 | verbose "result is $result" | |
2735 | verbose "output is $output" | |
2736 | if {$result == 1} { | |
2737 | return "" | |
2738 | } | |
4935890f | 2739 | set fi [open $tmp] |
b7fca990 | 2740 | fconfigure $fi -translation binary |
4935890f JK |
2741 | # Skip the NOTE header. |
2742 | read $fi 16 | |
2743 | set data [read $fi] | |
2744 | close $fi | |
2745 | file delete $tmp | |
7020f05c | 2746 | if ![string compare $data ""] then { |
4935890f JK |
2747 | return "" |
2748 | } | |
2749 | # Convert it to hex. | |
2750 | binary scan $data H* data | |
2751 | set data [regsub {^..} $data {\0/}] | |
2752 | return ".build-id/${data}.debug"; | |
2753 | } | |
2754 | ||
94277a38 DJ |
2755 | # Create stripped files for DEST, replacing it. If ARGS is passed, it is a |
2756 | # list of optional flags. The only currently supported flag is no-main, | |
2757 | # which removes the symbol entry for main from the separate debug file. | |
1f8a6abb | 2758 | |
94277a38 DJ |
2759 | proc gdb_gnu_strip_debug { dest args } { |
2760 | ||
1f8a6abb | 2761 | set debug_file [separate_debug_filename $dest] |
b741e217 DJ |
2762 | set strip_to_file_program [transform strip] |
2763 | set objcopy_program [transform objcopy] | |
1f8a6abb EZ |
2764 | |
2765 | # Make sure the directory that will hold the separated debug | |
2766 | # info actually exists. | |
2767 | set debug_dir [file dirname $debug_file] | |
2768 | if {! [file isdirectory $debug_dir]} { | |
2769 | file mkdir $debug_dir | |
2770 | } | |
2771 | ||
2772 | set debug_link [file tail $debug_file] | |
2773 | set stripped_file "${dest}.stripped" | |
2774 | ||
2775 | # Get rid of the debug info, and store result in stripped_file | |
2776 | # something like gdb/testsuite/gdb.base/blah.stripped. | |
2777 | set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output] | |
2778 | verbose "result is $result" | |
2779 | verbose "output is $output" | |
2780 | if {$result == 1} { | |
2781 | return 1 | |
2782 | } | |
2783 | ||
2784 | # Get rid of everything but the debug info, and store result in debug_file | |
2785 | # This will be in the .debug subdirectory, see above. | |
2786 | set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output] | |
2787 | verbose "result is $result" | |
2788 | verbose "output is $output" | |
2789 | if {$result == 1} { | |
2790 | return 1 | |
2791 | } | |
2792 | ||
94277a38 DJ |
2793 | # If no-main is passed, strip the symbol for main from the separate |
2794 | # file. This is to simulate the behavior of elfutils's eu-strip, which | |
2795 | # leaves the symtab in the original file only. There's no way to get | |
2796 | # objcopy or strip to remove the symbol table without also removing the | |
2797 | # debugging sections, so this is as close as we can get. | |
2798 | if { [llength $args] == 1 && [lindex $args 0] == "no-main" } { | |
2799 | set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output] | |
2800 | verbose "result is $result" | |
2801 | verbose "output is $output" | |
2802 | if {$result == 1} { | |
2803 | return 1 | |
2804 | } | |
2805 | file delete "${debug_file}" | |
2806 | file rename "${debug_file}-tmp" "${debug_file}" | |
2807 | } | |
2808 | ||
1f8a6abb EZ |
2809 | # Link the two previous output files together, adding the .gnu_debuglink |
2810 | # section to the stripped_file, containing a pointer to the debug_file, | |
2811 | # save the new file in dest. | |
2812 | # This will be the regular executable filename, in the usual location. | |
2813 | set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output] | |
2814 | verbose "result is $result" | |
2815 | verbose "output is $output" | |
2816 | if {$result == 1} { | |
2817 | return 1 | |
2818 | } | |
2819 | ||
2820 | return 0 | |
2821 | } | |
2822 | ||
d8295fe9 VP |
2823 | # Test the output of GDB_COMMAND matches the pattern obtained |
2824 | # by concatenating all elements of EXPECTED_LINES. This makes | |
2825 | # it possible to split otherwise very long string into pieces. | |
2826 | # If third argument is not empty, it's used as the name of the | |
2827 | # test to be printed on pass/fail. | |
2828 | proc help_test_raw { gdb_command expected_lines args } { | |
2829 | set message $gdb_command | |
2830 | if [llength $args]>0 then { | |
2831 | set message [lindex $args 0] | |
2832 | } | |
2833 | set expected_output [join $expected_lines ""] | |
2834 | gdb_test "${gdb_command}" "${expected_output}" $message | |
2835 | } | |
2836 | ||
2837 | # Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES | |
2838 | # are regular expressions that should match the beginning of output, | |
2839 | # before the list of commands in that class. The presence of | |
2840 | # command list and standard epilogue will be tested automatically. | |
2841 | proc test_class_help { command_class expected_initial_lines args } { | |
2842 | set l_stock_body { | |
2843 | "List of commands\:.*\[\r\n\]+" | |
2844 | "Type \"help\" followed by command name for full documentation\.\[\r\n\]+" | |
2845 | "Type \"apropos word\" to search for commands related to \"word\"\.[\r\n\]+" | |
2846 | "Command name abbreviations are allowed if unambiguous\." | |
2847 | } | |
2848 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
2849 | ||
2850 | eval [list help_test_raw "help ${command_class}" $l_entire_body] $args | |
2851 | } | |
2852 | ||
2853 | # COMMAND_LIST should have either one element -- command to test, or | |
2854 | # two elements -- abbreviated command to test, and full command the first | |
2855 | # element is abbreviation of. | |
2856 | # The command must be a prefix command. EXPECTED_INITIAL_LINES | |
2857 | # are regular expressions that should match the beginning of output, | |
2858 | # before the list of subcommands. The presence of | |
2859 | # subcommand list and standard epilogue will be tested automatically. | |
2860 | proc test_prefix_command_help { command_list expected_initial_lines args } { | |
2861 | set command [lindex $command_list 0] | |
2862 | if {[llength $command_list]>1} { | |
2863 | set full_command [lindex $command_list 1] | |
2864 | } else { | |
2865 | set full_command $command | |
2866 | } | |
2867 | # Use 'list' and not just {} because we want variables to | |
2868 | # be expanded in this list. | |
2869 | set l_stock_body [list\ | |
2870 | "List of $full_command subcommands\:.*\[\r\n\]+"\ | |
2871 | "Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\ | |
2872 | "Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\ | |
2873 | "Command name abbreviations are allowed if unambiguous\."] | |
2874 | set l_entire_body [concat $expected_initial_lines $l_stock_body] | |
2875 | if {[llength $args]>0} { | |
2876 | help_test_raw "help ${command}" $l_entire_body [lindex $args 0] | |
2877 | } else { | |
2878 | help_test_raw "help ${command}" $l_entire_body | |
2879 | } | |
2880 | } | |
dbc52822 VP |
2881 | |
2882 | # Build executable named EXECUTABLE, from SOURCES. If SOURCES are not | |
2883 | # provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test | |
2884 | # to pass to untested, if something is wrong. OPTIONS are passed | |
2885 | # to gdb_compile directly. | |
2886 | proc build_executable { testname executable {sources ""} {options {debug}} } { | |
2887 | ||
2888 | global objdir | |
2889 | global subdir | |
2890 | global srcdir | |
2891 | if {[llength $sources]==0} { | |
2892 | set sources ${executable}.c | |
2893 | } | |
2894 | ||
2895 | set binfile ${objdir}/${subdir}/${executable} | |
2896 | ||
2897 | set objects {} | |
2898 | for {set i 0} "\$i<[llength $sources]" {incr i} { | |
2899 | set s [lindex $sources $i] | |
2900 | if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } { | |
2901 | untested $testname | |
2902 | return -1 | |
2903 | } | |
2904 | lappend objects "${binfile}${i}.o" | |
2905 | } | |
2906 | ||
2907 | if { [gdb_compile $objects "${binfile}" executable $options] != "" } { | |
2908 | untested $testname | |
2909 | return -1 | |
2910 | } | |
2911 | ||
2912 | if [get_compiler_info ${binfile}] { | |
2913 | return -1 | |
2914 | } | |
2915 | return 0 | |
2916 | } | |
2917 | ||
2918 | # Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is | |
2919 | # the name of binary in ${objdir}/${subdir}. | |
2920 | proc clean_restart { executable } { | |
2921 | global srcdir | |
2922 | global objdir | |
2923 | global subdir | |
2924 | set binfile ${objdir}/${subdir}/${executable} | |
2925 | ||
2926 | gdb_exit | |
2927 | gdb_start | |
2928 | gdb_reinitialize_dir $srcdir/$subdir | |
2929 | gdb_load ${binfile} | |
2930 | ||
2931 | if [target_info exists gdb_stub] { | |
2932 | gdb_step_for_stub; | |
2933 | } | |
2934 | } | |
2935 | ||
2936 | # Prepares for testing, by calling build_executable, and then clean_restart. | |
2937 | # Please refer to build_executable for parameter description. | |
2938 | proc prepare_for_testing { testname executable {sources ""} {options {debug}}} { | |
2939 | ||
734a5c36 | 2940 | if {[build_executable $testname $executable $sources $options] == -1} { |
dbc52822 VP |
2941 | return -1 |
2942 | } | |
2943 | clean_restart $executable | |
2944 | ||
2945 | return 0 | |
2946 | } | |
7065b901 TT |
2947 | |
2948 | proc get_valueof { fmt exp default } { | |
2949 | global gdb_prompt | |
2950 | ||
2951 | set test "get valueof \"${exp}\"" | |
2952 | set val ${default} | |
2953 | gdb_test_multiple "print${fmt} ${exp}" "$test" { | |
417e16e2 PM |
2954 | -re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" { |
2955 | set val $expect_out(1,string) | |
2956 | pass "$test ($val)" | |
2957 | } | |
2958 | timeout { | |
2959 | fail "$test (timeout)" | |
2960 | } | |
2961 | } | |
2962 | return ${val} | |
2963 | } | |
2964 | ||
2965 | proc get_integer_valueof { exp default } { | |
2966 | global gdb_prompt | |
2967 | ||
2968 | set test "get integer valueof \"${exp}\"" | |
2969 | set val ${default} | |
2970 | gdb_test_multiple "print /d ${exp}" "$test" { | |
7065b901 TT |
2971 | -re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" { |
2972 | set val $expect_out(1,string) | |
2973 | pass "$test ($val)" | |
2974 | } | |
2975 | timeout { | |
417e16e2 | 2976 | fail "$test (timeout)" |
7065b901 TT |
2977 | } |
2978 | } | |
2979 | return ${val} | |
2980 | } | |
2981 | ||
faafb047 PM |
2982 | proc get_hexadecimal_valueof { exp default } { |
2983 | global gdb_prompt | |
2984 | send_gdb "print /x ${exp}\n" | |
2985 | set test "get hexadecimal valueof \"${exp}\"" | |
2986 | gdb_expect { | |
2987 | -re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" { | |
2988 | set val $expect_out(1,string) | |
2989 | pass "$test" | |
2990 | } | |
2991 | timeout { | |
2992 | set val ${default} | |
2993 | fail "$test (timeout)" | |
2994 | } | |
2995 | } | |
2996 | return ${val} | |
2997 | } | |
417e16e2 | 2998 | |
7065b901 | 2999 | proc get_sizeof { type default } { |
417e16e2 | 3000 | return [get_integer_valueof "sizeof (${type})" $default] |
7065b901 TT |
3001 | } |
3002 | ||
812f7342 TT |
3003 | # Log gdb command line and script if requested. |
3004 | if {[info exists TRANSCRIPT]} { | |
3005 | rename send_gdb real_send_gdb | |
3006 | rename remote_spawn real_remote_spawn | |
3007 | rename remote_close real_remote_close | |
3008 | ||
3009 | global gdb_transcript | |
3010 | set gdb_transcript "" | |
3011 | ||
3012 | global gdb_trans_count | |
3013 | set gdb_trans_count 1 | |
3014 | ||
3015 | proc remote_spawn {args} { | |
3016 | global gdb_transcript gdb_trans_count outdir | |
3017 | ||
3018 | if {$gdb_transcript != ""} { | |
3019 | close $gdb_transcript | |
3020 | } | |
3021 | set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w] | |
3022 | puts $gdb_transcript [lindex $args 1] | |
3023 | incr gdb_trans_count | |
3024 | ||
3025 | return [uplevel real_remote_spawn $args] | |
3026 | } | |
3027 | ||
3028 | proc remote_close {args} { | |
3029 | global gdb_transcript | |
3030 | ||
3031 | if {$gdb_transcript != ""} { | |
3032 | close $gdb_transcript | |
3033 | set gdb_transcript "" | |
3034 | } | |
3035 | ||
3036 | return [uplevel real_remote_close $args] | |
3037 | } | |
3038 | ||
3039 | proc send_gdb {args} { | |
3040 | global gdb_transcript | |
3041 | ||
3042 | if {$gdb_transcript != ""} { | |
3043 | puts -nonewline $gdb_transcript [lindex $args 0] | |
3044 | } | |
3045 | ||
3046 | return [uplevel real_send_gdb $args] | |
3047 | } | |
3048 | } |