[deliverable/linux.git] / include / asm-arm / hardware / locomo.h

/*
 * linux/include/asm-arm/hardware/locomo.h
 *
 * This file contains the definitions for the LoCoMo G/A Chip
 *
 * (C) Copyright 2004 John Lenz
 *
 * May be copied or modified under the terms of the GNU General Public
 * License.  See linux/COPYING for more information.
 *
 * Based on sa1111.h
 */
#ifndef _ASM_ARCH_LOCOMO
#define _ASM_ARCH_LOCOMO

#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
#define locomo_readl(addr)	(*(volatile u16 *)(addr))

/* LOCOMO version */
#define LOCOMO_VER	0x00

/* Pin status */
#define LOCOMO_ST	0x04

/* Pin status */
#define LOCOMO_C32K	0x08

/* Interrupt controller */
#define LOCOMO_ICR	0x0C

/* MCS decoder for boot selecting */
#define LOCOMO_MCSX0	0x10
#define LOCOMO_MCSX1	0x14
#define LOCOMO_MCSX2	0x18
#define LOCOMO_MCSX3	0x1c

/* Touch panel controller */
#define LOCOMO_ASD	0x20		/* AD start delay */
#define LOCOMO_HSD	0x28		/* HSYS delay */
#define LOCOMO_HSC	0x2c		/* HSYS period */
#define LOCOMO_TADC	0x30		/* tablet ADC clock */


/* Long time timer */
#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
#define LOCOMO_LTINT	0xdc		/* LTC interrupt */

/* DAC control signal for LCD (COMADJ ) */
#define LOCOMO_DAC		0xe0
/* DAC control */
#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */

/* SPI interface */
#define LOCOMO_SPIMD	0x60		/* SPI mode setting */
#define LOCOMO_SPICT	0x64		/* SPI mode control */
#define LOCOMO_SPIST	0x68		/* SPI status */
#define LOCOMO_SPIIS	0x70		/* SPI interrupt status */
#define LOCOMO_SPIWE	0x74		/* SPI interrupt status write enable */
#define LOCOMO_SPIIE	0x78		/* SPI interrupt enable */
#define LOCOMO_SPIIR	0x7c		/* SPI interrupt request */
#define LOCOMO_SPITD	0x80		/* SPI transfer data write */
#define LOCOMO_SPIRD	0x84		/* SPI receive data read */
#define LOCOMO_SPITS	0x88		/* SPI transfer data shift */
#define LOCOMO_SPIRS	0x8C		/* SPI receive data shift */
#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
#define	LOCOMO_SPI_OVRN	(1 << 2)	/* Over Run bit */
#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */

/* GPIO */
#define LOCOMO_GPD		0x90	/* GPIO direction */
#define LOCOMO_GPE		0x94	/* GPIO input enable */
#define LOCOMO_GPL		0x98	/* GPIO level */
#define LOCOMO_GPO		0x9c	/* GPIO out data setteing */
#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
#define LOCOMO_GWE		0xac	/* GPIO status write enable */
#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)

/* Start the definitions of the devices.  Each device has an initial
 * base address and a series of offsets from that base address. */

/* Keyboard controller */
#define LOCOMO_KEYBOARD		0x40
#define LOCOMO_KIB		0x00	/* KIB level */
#define LOCOMO_KSC		0x04	/* KSTRB control */
#define LOCOMO_KCMD		0x08	/* KSTRB command */
#define LOCOMO_KIC		0x0c	/* Key interrupt */

/* Front light adjustment controller */
#define LOCOMO_FRONTLIGHT	0xc8
#define LOCOMO_ALS		0x00	/* Adjust light cycle */
#define LOCOMO_ALD		0x04	/* Adjust light duty */

#define LOCOMO_ALC_EN		0x8000

/* Backlight controller: TFT signal */
#define LOCOMO_BACKLIGHT	0x38
#define LOCOMO_TC		0x00		/* TFT control signal */
#define LOCOMO_CPSD		0x04		/* CPS delay */

/* Audio controller */
#define LOCOMO_AUDIO		0x54
#define LOCOMO_ACC		0x00	/* Audio clock */
#define LOCOMO_PAIF		0x7C	/* PCM audio interface */
/* Audio clock */
#define	LOCOMO_ACC_XON		0x80
#define	LOCOMO_ACC_XEN		0x40
#define	LOCOMO_ACC_XSEL0	0x00
#define	LOCOMO_ACC_XSEL1	0x20
#define	LOCOMO_ACC_MCLKEN	0x10
#define	LOCOMO_ACC_64FSEN	0x08
#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
/* PCM audio interface */
#define	LOCOMO_PAIF_SCINV	0x20
#define	LOCOMO_PAIF_SCEN	0x10
#define	LOCOMO_PAIF_LRCRST	0x08
#define	LOCOMO_PAIF_LRCEVE	0x04
#define	LOCOMO_PAIF_LRCINV	0x02
#define	LOCOMO_PAIF_LRCEN	0x01

/* LED controller */
#define LOCOMO_LED		0xe8
#define LOCOMO_LPT0		0x00
#define LOCOMO_LPT1		0x04
/* LED control */
#define LOCOMO_LPT_TOFH		0x80
#define LOCOMO_LPT_TOFL		0x08
#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))

extern struct bus_type locomo_bus_type;

#define LOCOMO_DEVID_KEYBOARD	0
#define LOCOMO_DEVID_FRONTLIGHT	1
#define LOCOMO_DEVID_BACKLIGHT	2
#define LOCOMO_DEVID_AUDIO	3
#define LOCOMO_DEVID_LED	4
#define LOCOMO_DEVID_UART	5

struct locomo_dev {
	struct device	dev;
	unsigned int	devid;
	unsigned int	irq[1];

	void		*mapbase;
	unsigned long	length;

	u64		dma_mask;
};

#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)

#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)

struct locomo_driver {
	struct device_driver	drv;
	unsigned int		devid;
	int (*probe)(struct locomo_dev *);
	int (*remove)(struct locomo_dev *);
	int (*suspend)(struct locomo_dev *, pm_message_t);
	int (*resume)(struct locomo_dev *);
};

#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)

#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)

void locomo_lcd_power(struct locomo_dev *, int, unsigned int);

int locomo_driver_register(struct locomo_driver *);
void locomo_driver_unregister(struct locomo_driver *);

/* GPIO control functions */
void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir);
unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits);
unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits);
void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set);

/* M62332 control function */
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);

/* Frontlight control */
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);

#endif
Commit	Line	Data
1da177e4 LT	1	/*
	2	* linux/include/asm-arm/hardware/locomo.h
	3	*
	4	* This file contains the definitions for the LoCoMo G/A Chip
	5	*
	6	* (C) Copyright 2004 John Lenz
	7	*
	8	* May be copied or modified under the terms of the GNU General Public
	9	* License. See linux/COPYING for more information.
	10	*
	11	* Based on sa1111.h
	12	*/
	13	#ifndef _ASM_ARCH_LOCOMO
	14	#define _ASM_ARCH_LOCOMO
	15
	16	#define locomo_writel(val,addr) ({ (volatile u16 )(addr) = (val); })
	17	#define locomo_readl(addr) ((volatile u16 )(addr))
	18
	19	/* LOCOMO version */
	20	#define LOCOMO_VER 0x00
	21
	22	/* Pin status */
	23	#define LOCOMO_ST 0x04
	24
	25	/* Pin status */
	26	#define LOCOMO_C32K 0x08
	27
	28	/* Interrupt controller */
	29	#define LOCOMO_ICR 0x0C
	30
	31	/* MCS decoder for boot selecting */
	32	#define LOCOMO_MCSX0 0x10
	33	#define LOCOMO_MCSX1 0x14
	34	#define LOCOMO_MCSX2 0x18
	35	#define LOCOMO_MCSX3 0x1c
	36
	37	/* Touch panel controller */
	38	#define LOCOMO_ASD 0x20 /* AD start delay */
	39	#define LOCOMO_HSD 0x28 /* HSYS delay */
	40	#define LOCOMO_HSC 0x2c /* HSYS period */
	41	#define LOCOMO_TADC 0x30 /* tablet ADC clock */
	42
	43
	44	/* Long time timer */
	45	#define LOCOMO_LTC 0xd8 /* LTC interrupt setting */
	46	#define LOCOMO_LTINT 0xdc /* LTC interrupt */
	47
	48	/* DAC control signal for LCD (COMADJ ) */
	49	#define LOCOMO_DAC 0xe0
	50	/* DAC control */
	51	#define LOCOMO_DAC_SCLOEB 0x08 /* SCL pin output data */
	52	#define LOCOMO_DAC_TEST 0x04 /* Test bit */
	53	#define LOCOMO_DAC_SDA 0x02 /* SDA pin level (read-only) */
	54	#define LOCOMO_DAC_SDAOEB 0x01 /* SDA pin output data */
	55
	56	/* SPI interface */
	57	#define LOCOMO_SPIMD 0x60 /* SPI mode setting */
	58	#define LOCOMO_SPICT 0x64 /* SPI mode control */
	59	#define LOCOMO_SPIST 0x68 /* SPI status */
	60	#define LOCOMO_SPIIS 0x70 /* SPI interrupt status */
	61	#define LOCOMO_SPIWE 0x74 /* SPI interrupt status write enable */
	62	#define LOCOMO_SPIIE 0x78 /* SPI interrupt enable */
	63	#define LOCOMO_SPIIR 0x7c /* SPI interrupt request */
	64	#define LOCOMO_SPITD 0x80 /* SPI transfer data write */
65	#define LOCOMO_SPIRD 0x84 /* SPI receive data read */
66	#define LOCOMO_SPITS 0x88 /* SPI transfer data shift */
67	#define LOCOMO_SPIRS 0x8C /* SPI receive data shift */
68	#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
69	#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */
70	#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
71	#define LOCOMO_SPI_RFR (1) /* read buffer bit */
72
73	/* GPIO */
74	#define LOCOMO_GPD 0x90 /* GPIO direction */
75	#define LOCOMO_GPE 0x94 /* GPIO input enable */
76	#define LOCOMO_GPL 0x98 /* GPIO level */
77	#define LOCOMO_GPO 0x9c /* GPIO out data setteing */
78	#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
79	#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
80	#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
81	#define LOCOMO_GWE 0xac /* GPIO status write enable */
82	#define LOCOMO_GIE 0xb0 /* GPIO interrupt enable */
83	#define LOCOMO_GIR 0xb4 /* GPIO interrupt request */
84	#define LOCOMO_GPIO(Nb) (0x01 << (Nb))
85	#define LOCOMO_GPIO_RTS LOCOMO_GPIO(0)
86	#define LOCOMO_GPIO_CTS LOCOMO_GPIO(1)
87	#define LOCOMO_GPIO_DSR LOCOMO_GPIO(2)
88	#define LOCOMO_GPIO_DTR LOCOMO_GPIO(3)
89	#define LOCOMO_GPIO_LCD_VSHA_ON LOCOMO_GPIO(4)
90	#define LOCOMO_GPIO_LCD_VSHD_ON LOCOMO_GPIO(5)
91	#define LOCOMO_GPIO_LCD_VEE_ON LOCOMO_GPIO(6)
92	#define LOCOMO_GPIO_LCD_MOD LOCOMO_GPIO(7)
93	#define LOCOMO_GPIO_DAC_ON LOCOMO_GPIO(8)
94	#define LOCOMO_GPIO_FL_VR LOCOMO_GPIO(9)
95	#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
96	#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
97	#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
98
99	/* Start the definitions of the devices. Each device has an initial
100	* base address and a series of offsets from that base address. */
101
102	/* Keyboard controller */
103	#define LOCOMO_KEYBOARD 0x40
104	#define LOCOMO_KIB 0x00 /* KIB level */
105	#define LOCOMO_KSC 0x04 /* KSTRB control */
106	#define LOCOMO_KCMD 0x08 /* KSTRB command */
107	#define LOCOMO_KIC 0x0c /* Key interrupt */
108
109	/* Front light adjustment controller */
110	#define LOCOMO_FRONTLIGHT 0xc8
111	#define LOCOMO_ALS 0x00 /* Adjust light cycle */
112	#define LOCOMO_ALD 0x04 /* Adjust light duty */
113
e4423781 RP	114	#define LOCOMO_ALC_EN 0x8000
e4423781 RP	115
1da177e4 LT	116	/* Backlight controller: TFT signal */
	117	#define LOCOMO_BACKLIGHT 0x38
	118	#define LOCOMO_TC 0x00 /* TFT control signal */
	119	#define LOCOMO_CPSD 0x04 /* CPS delay */
	120
	121	/* Audio controller */
	122	#define LOCOMO_AUDIO 0x54
	123	#define LOCOMO_ACC 0x00 /* Audio clock */
	124	#define LOCOMO_PAIF 0x7C /* PCM audio interface */
	125	/* Audio clock */
	126	#define LOCOMO_ACC_XON 0x80
	127	#define LOCOMO_ACC_XEN 0x40
	128	#define LOCOMO_ACC_XSEL0 0x00
	129	#define LOCOMO_ACC_XSEL1 0x20
	130	#define LOCOMO_ACC_MCLKEN 0x10
	131	#define LOCOMO_ACC_64FSEN 0x08
	132	#define LOCOMO_ACC_CLKSEL000 0x00 /* mclk 2 */
	133	#define LOCOMO_ACC_CLKSEL001 0x01 /* mclk 3 */
	134	#define LOCOMO_ACC_CLKSEL010 0x02 /* mclk 4 */
	135	#define LOCOMO_ACC_CLKSEL011 0x03 /* mclk 6 */
	136	#define LOCOMO_ACC_CLKSEL100 0x04 /* mclk 8 */
	137	#define LOCOMO_ACC_CLKSEL101 0x05 /* mclk 12 */
	138	/* PCM audio interface */
	139	#define LOCOMO_PAIF_SCINV 0x20
	140	#define LOCOMO_PAIF_SCEN 0x10
	141	#define LOCOMO_PAIF_LRCRST 0x08
	142	#define LOCOMO_PAIF_LRCEVE 0x04
	143	#define LOCOMO_PAIF_LRCINV 0x02
	144	#define LOCOMO_PAIF_LRCEN 0x01
	145
	146	/* LED controller */
	147	#define LOCOMO_LED 0xe8
	148	#define LOCOMO_LPT0 0x00
	149	#define LOCOMO_LPT1 0x04
	150	/* LED control */
	151	#define LOCOMO_LPT_TOFH 0x80
	152	#define LOCOMO_LPT_TOFL 0x08
	153	#define LOCOMO_LPT_TOH(TOH) ((TOH & 0x7) << 4)
	154	#define LOCOMO_LPT_TOL(TOL) ((TOL & 0x7))
	155
	156	extern struct bus_type locomo_bus_type;
	157
	158	#define LOCOMO_DEVID_KEYBOARD 0
	159	#define LOCOMO_DEVID_FRONTLIGHT 1
	160	#define LOCOMO_DEVID_BACKLIGHT 2
	161	#define LOCOMO_DEVID_AUDIO 3
	162	#define LOCOMO_DEVID_LED 4
	163	#define LOCOMO_DEVID_UART 5
	164
	165	struct locomo_dev {
	166	struct device dev;
	167	unsigned int devid;
	168	unsigned int irq[1];
	169
	170	void *mapbase;
	171	unsigned long length;
	172
	173	u64 dma_mask;
	174	};
	175
	176	#define LOCOMO_DEV(_d) container_of((_d), struct locomo_dev, dev)
	177
	178	#define locomo_get_drvdata(d) dev_get_drvdata(&(d)->dev)
	179	#define locomo_set_drvdata(d,p) dev_set_drvdata(&(d)->dev, p)
180
181	struct locomo_driver {
182	struct device_driver drv;
183	unsigned int devid;
184	int (probe)(struct locomo_dev );
185	int (remove)(struct locomo_dev );
186	int (suspend)(struct locomo_dev , pm_message_t);
187	int (resume)(struct locomo_dev );
188	};
189
190	#define LOCOMO_DRV(_d) container_of((_d), struct locomo_driver, drv)
191
192	#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
193
194	void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
195
196	int locomo_driver_register(struct locomo_driver *);
197	void locomo_driver_unregister(struct locomo_driver *);
198
199	/* GPIO control functions */
200	void locomo_gpio_set_dir(struct locomo_dev *ldev, unsigned int bits, unsigned int dir);
201	unsigned int locomo_gpio_read_level(struct locomo_dev *ldev, unsigned int bits);
202	unsigned int locomo_gpio_read_output(struct locomo_dev *ldev, unsigned int bits);
203	void locomo_gpio_write(struct locomo_dev *ldev, unsigned int bits, unsigned int set);
204
205	/* M62332 control function */
206	void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
207
e4423781 RP	208	/* Frontlight control */
	209	void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
	210
1da177e4	211	#endif