Commit | Line | Data |
---|---|---|
33d71d26 KG |
1 | /* |
2 | * MPC8xx Communication Processor Module. | |
3 | * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) | |
4 | * | |
5 | * This file contains structures and information for the communication | |
6 | * processor channels. Some CPM control and status is available | |
7 | * throught the MPC8xx internal memory map. See immap.h for details. | |
8 | * This file only contains what I need for the moment, not the total | |
9 | * CPM capabilities. I (or someone else) will add definitions as they | |
10 | * are needed. -- Dan | |
11 | * | |
12 | * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 | |
13 | * bytes of the DP RAM and relocates the I2C parameter area to the | |
14 | * IDMA1 space. The remaining DP RAM is available for buffer descriptors | |
15 | * or other use. | |
16 | */ | |
b5677d84 JF |
17 | #ifndef __CPM1__ |
18 | #define __CPM1__ | |
33d71d26 KG |
19 | |
20 | #include <asm/8xx_immap.h> | |
21 | #include <asm/ptrace.h> | |
15f8c604 | 22 | #include <asm/cpm.h> |
33d71d26 KG |
23 | |
24 | /* CPM Command register. | |
25 | */ | |
26 | #define CPM_CR_RST ((ushort)0x8000) | |
27 | #define CPM_CR_OPCODE ((ushort)0x0f00) | |
28 | #define CPM_CR_CHAN ((ushort)0x00f0) | |
29 | #define CPM_CR_FLG ((ushort)0x0001) | |
30 | ||
33d71d26 KG |
31 | /* Channel numbers. |
32 | */ | |
33 | #define CPM_CR_CH_SCC1 ((ushort)0x0000) | |
34 | #define CPM_CR_CH_I2C ((ushort)0x0001) /* I2C and IDMA1 */ | |
35 | #define CPM_CR_CH_SCC2 ((ushort)0x0004) | |
36 | #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / IDMA2 / Timers */ | |
37 | #define CPM_CR_CH_TIMER CPM_CR_CH_SPI | |
38 | #define CPM_CR_CH_SCC3 ((ushort)0x0008) | |
39 | #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / DSP1 */ | |
40 | #define CPM_CR_CH_SCC4 ((ushort)0x000c) | |
41 | #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / DSP2 */ | |
42 | ||
43 | #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) | |
44 | ||
15f8c604 | 45 | #ifndef CONFIG_PPC_CPM_NEW_BINDING |
33d71d26 KG |
46 | /* The dual ported RAM is multi-functional. Some areas can be (and are |
47 | * being) used for microcode. There is an area that can only be used | |
48 | * as data ram for buffer descriptors, which is all we use right now. | |
49 | * Currently the first 512 and last 256 bytes are used for microcode. | |
50 | */ | |
51 | #define CPM_DATAONLY_BASE ((uint)0x0800) | |
52 | #define CPM_DATAONLY_SIZE ((uint)0x0700) | |
53 | #define CPM_DP_NOSPACE ((uint)0x7fffffff) | |
15f8c604 | 54 | #endif |
33d71d26 KG |
55 | |
56 | /* Export the base address of the communication processor registers | |
57 | * and dual port ram. | |
58 | */ | |
fb533d0c | 59 | extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */ |
15f8c604 SW |
60 | |
61 | #ifdef CONFIG_PPC_CPM_NEW_BINDING | |
62 | #define cpm_dpalloc cpm_muram_alloc | |
63 | #define cpm_dpfree cpm_muram_free | |
64 | #define cpm_dpram_addr cpm_muram_addr | |
65 | #define cpm_dpram_phys cpm_muram_dma | |
66 | #else | |
33d71d26 KG |
67 | extern unsigned long cpm_dpalloc(uint size, uint align); |
68 | extern int cpm_dpfree(unsigned long offset); | |
69 | extern unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align); | |
70 | extern void cpm_dpdump(void); | |
71 | extern void *cpm_dpram_addr(unsigned long offset); | |
b5677d84 | 72 | extern uint cpm_dpram_phys(u8 *addr); |
15f8c604 SW |
73 | #endif |
74 | ||
33d71d26 KG |
75 | extern void cpm_setbrg(uint brg, uint rate); |
76 | ||
4d20826f | 77 | extern void cpm_load_patch(cpm8xx_t *cp); |
33d71d26 | 78 | |
49b51545 JF |
79 | extern void cpm_reset(void); |
80 | ||
33d71d26 KG |
81 | /* Parameter RAM offsets. |
82 | */ | |
83 | #define PROFF_SCC1 ((uint)0x0000) | |
84 | #define PROFF_IIC ((uint)0x0080) | |
85 | #define PROFF_SCC2 ((uint)0x0100) | |
86 | #define PROFF_SPI ((uint)0x0180) | |
87 | #define PROFF_SCC3 ((uint)0x0200) | |
88 | #define PROFF_SMC1 ((uint)0x0280) | |
89 | #define PROFF_SCC4 ((uint)0x0300) | |
90 | #define PROFF_SMC2 ((uint)0x0380) | |
91 | ||
92 | /* Define enough so I can at least use the serial port as a UART. | |
93 | * The MBX uses SMC1 as the host serial port. | |
94 | */ | |
95 | typedef struct smc_uart { | |
96 | ushort smc_rbase; /* Rx Buffer descriptor base address */ | |
97 | ushort smc_tbase; /* Tx Buffer descriptor base address */ | |
98 | u_char smc_rfcr; /* Rx function code */ | |
99 | u_char smc_tfcr; /* Tx function code */ | |
100 | ushort smc_mrblr; /* Max receive buffer length */ | |
101 | uint smc_rstate; /* Internal */ | |
102 | uint smc_idp; /* Internal */ | |
103 | ushort smc_rbptr; /* Internal */ | |
104 | ushort smc_ibc; /* Internal */ | |
105 | uint smc_rxtmp; /* Internal */ | |
106 | uint smc_tstate; /* Internal */ | |
107 | uint smc_tdp; /* Internal */ | |
108 | ushort smc_tbptr; /* Internal */ | |
109 | ushort smc_tbc; /* Internal */ | |
110 | uint smc_txtmp; /* Internal */ | |
111 | ushort smc_maxidl; /* Maximum idle characters */ | |
112 | ushort smc_tmpidl; /* Temporary idle counter */ | |
113 | ushort smc_brklen; /* Last received break length */ | |
114 | ushort smc_brkec; /* rcv'd break condition counter */ | |
115 | ushort smc_brkcr; /* xmt break count register */ | |
116 | ushort smc_rmask; /* Temporary bit mask */ | |
117 | char res1[8]; /* Reserved */ | |
118 | ushort smc_rpbase; /* Relocation pointer */ | |
119 | } smc_uart_t; | |
120 | ||
121 | /* Function code bits. | |
122 | */ | |
123 | #define SMC_EB ((u_char)0x10) /* Set big endian byte order */ | |
124 | ||
125 | /* SMC uart mode register. | |
126 | */ | |
127 | #define SMCMR_REN ((ushort)0x0001) | |
128 | #define SMCMR_TEN ((ushort)0x0002) | |
129 | #define SMCMR_DM ((ushort)0x000c) | |
130 | #define SMCMR_SM_GCI ((ushort)0x0000) | |
131 | #define SMCMR_SM_UART ((ushort)0x0020) | |
132 | #define SMCMR_SM_TRANS ((ushort)0x0030) | |
133 | #define SMCMR_SM_MASK ((ushort)0x0030) | |
134 | #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ | |
135 | #define SMCMR_REVD SMCMR_PM_EVEN | |
136 | #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ | |
137 | #define SMCMR_BS SMCMR_PEN | |
138 | #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ | |
139 | #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ | |
140 | #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) | |
141 | ||
142 | /* SMC2 as Centronics parallel printer. It is half duplex, in that | |
143 | * it can only receive or transmit. The parameter ram values for | |
144 | * each direction are either unique or properly overlap, so we can | |
145 | * include them in one structure. | |
146 | */ | |
147 | typedef struct smc_centronics { | |
148 | ushort scent_rbase; | |
149 | ushort scent_tbase; | |
150 | u_char scent_cfcr; | |
151 | u_char scent_smask; | |
152 | ushort scent_mrblr; | |
153 | uint scent_rstate; | |
154 | uint scent_r_ptr; | |
155 | ushort scent_rbptr; | |
156 | ushort scent_r_cnt; | |
157 | uint scent_rtemp; | |
158 | uint scent_tstate; | |
159 | uint scent_t_ptr; | |
160 | ushort scent_tbptr; | |
161 | ushort scent_t_cnt; | |
162 | uint scent_ttemp; | |
163 | ushort scent_max_sl; | |
164 | ushort scent_sl_cnt; | |
165 | ushort scent_character1; | |
166 | ushort scent_character2; | |
167 | ushort scent_character3; | |
168 | ushort scent_character4; | |
169 | ushort scent_character5; | |
170 | ushort scent_character6; | |
171 | ushort scent_character7; | |
172 | ushort scent_character8; | |
173 | ushort scent_rccm; | |
174 | ushort scent_rccr; | |
175 | } smc_cent_t; | |
176 | ||
177 | /* Centronics Status Mask Register. | |
178 | */ | |
179 | #define SMC_CENT_F ((u_char)0x08) | |
180 | #define SMC_CENT_PE ((u_char)0x04) | |
181 | #define SMC_CENT_S ((u_char)0x02) | |
182 | ||
183 | /* SMC Event and Mask register. | |
184 | */ | |
185 | #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ | |
186 | #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ | |
187 | #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ | |
188 | #define SMCM_BSY ((unsigned char)0x04) | |
189 | #define SMCM_TX ((unsigned char)0x02) | |
190 | #define SMCM_RX ((unsigned char)0x01) | |
191 | ||
192 | /* Baud rate generators. | |
193 | */ | |
194 | #define CPM_BRG_RST ((uint)0x00020000) | |
195 | #define CPM_BRG_EN ((uint)0x00010000) | |
196 | #define CPM_BRG_EXTC_INT ((uint)0x00000000) | |
197 | #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) | |
198 | #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) | |
199 | #define CPM_BRG_ATB ((uint)0x00002000) | |
200 | #define CPM_BRG_CD_MASK ((uint)0x00001ffe) | |
201 | #define CPM_BRG_DIV16 ((uint)0x00000001) | |
202 | ||
203 | /* SI Clock Route Register | |
204 | */ | |
205 | #define SICR_RCLK_SCC1_BRG1 ((uint)0x00000000) | |
206 | #define SICR_TCLK_SCC1_BRG1 ((uint)0x00000000) | |
207 | #define SICR_RCLK_SCC2_BRG2 ((uint)0x00000800) | |
208 | #define SICR_TCLK_SCC2_BRG2 ((uint)0x00000100) | |
209 | #define SICR_RCLK_SCC3_BRG3 ((uint)0x00100000) | |
210 | #define SICR_TCLK_SCC3_BRG3 ((uint)0x00020000) | |
211 | #define SICR_RCLK_SCC4_BRG4 ((uint)0x18000000) | |
212 | #define SICR_TCLK_SCC4_BRG4 ((uint)0x03000000) | |
213 | ||
214 | /* SCCs. | |
215 | */ | |
216 | #define SCC_GSMRH_IRP ((uint)0x00040000) | |
217 | #define SCC_GSMRH_GDE ((uint)0x00010000) | |
218 | #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) | |
219 | #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) | |
220 | #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) | |
221 | #define SCC_GSMRH_REVD ((uint)0x00002000) | |
222 | #define SCC_GSMRH_TRX ((uint)0x00001000) | |
223 | #define SCC_GSMRH_TTX ((uint)0x00000800) | |
224 | #define SCC_GSMRH_CDP ((uint)0x00000400) | |
225 | #define SCC_GSMRH_CTSP ((uint)0x00000200) | |
226 | #define SCC_GSMRH_CDS ((uint)0x00000100) | |
227 | #define SCC_GSMRH_CTSS ((uint)0x00000080) | |
228 | #define SCC_GSMRH_TFL ((uint)0x00000040) | |
229 | #define SCC_GSMRH_RFW ((uint)0x00000020) | |
230 | #define SCC_GSMRH_TXSY ((uint)0x00000010) | |
231 | #define SCC_GSMRH_SYNL16 ((uint)0x0000000c) | |
232 | #define SCC_GSMRH_SYNL8 ((uint)0x00000008) | |
233 | #define SCC_GSMRH_SYNL4 ((uint)0x00000004) | |
234 | #define SCC_GSMRH_RTSM ((uint)0x00000002) | |
235 | #define SCC_GSMRH_RSYN ((uint)0x00000001) | |
236 | ||
237 | #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ | |
238 | #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) | |
239 | #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) | |
240 | #define SCC_GSMRL_EDGE_POS ((uint)0x20000000) | |
241 | #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) | |
242 | #define SCC_GSMRL_TCI ((uint)0x10000000) | |
243 | #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) | |
244 | #define SCC_GSMRL_TSNC_4 ((uint)0x08000000) | |
245 | #define SCC_GSMRL_TSNC_14 ((uint)0x04000000) | |
246 | #define SCC_GSMRL_TSNC_INF ((uint)0x00000000) | |
247 | #define SCC_GSMRL_RINV ((uint)0x02000000) | |
248 | #define SCC_GSMRL_TINV ((uint)0x01000000) | |
249 | #define SCC_GSMRL_TPL_128 ((uint)0x00c00000) | |
250 | #define SCC_GSMRL_TPL_64 ((uint)0x00a00000) | |
251 | #define SCC_GSMRL_TPL_48 ((uint)0x00800000) | |
252 | #define SCC_GSMRL_TPL_32 ((uint)0x00600000) | |
253 | #define SCC_GSMRL_TPL_16 ((uint)0x00400000) | |
254 | #define SCC_GSMRL_TPL_8 ((uint)0x00200000) | |
255 | #define SCC_GSMRL_TPL_NONE ((uint)0x00000000) | |
256 | #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) | |
257 | #define SCC_GSMRL_TPP_01 ((uint)0x00100000) | |
258 | #define SCC_GSMRL_TPP_10 ((uint)0x00080000) | |
259 | #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) | |
260 | #define SCC_GSMRL_TEND ((uint)0x00040000) | |
261 | #define SCC_GSMRL_TDCR_32 ((uint)0x00030000) | |
262 | #define SCC_GSMRL_TDCR_16 ((uint)0x00020000) | |
263 | #define SCC_GSMRL_TDCR_8 ((uint)0x00010000) | |
264 | #define SCC_GSMRL_TDCR_1 ((uint)0x00000000) | |
265 | #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) | |
266 | #define SCC_GSMRL_RDCR_16 ((uint)0x00008000) | |
267 | #define SCC_GSMRL_RDCR_8 ((uint)0x00004000) | |
268 | #define SCC_GSMRL_RDCR_1 ((uint)0x00000000) | |
269 | #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) | |
270 | #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) | |
271 | #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) | |
272 | #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) | |
273 | #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) | |
274 | #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) | |
275 | #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) | |
276 | #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) | |
277 | #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) | |
278 | #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) | |
279 | #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ | |
280 | #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) | |
281 | #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) | |
282 | #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) | |
283 | #define SCC_GSMRL_ENR ((uint)0x00000020) | |
284 | #define SCC_GSMRL_ENT ((uint)0x00000010) | |
285 | #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) | |
286 | #define SCC_GSMRL_MODE_QMC ((uint)0x0000000a) | |
287 | #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) | |
288 | #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) | |
289 | #define SCC_GSMRL_MODE_V14 ((uint)0x00000007) | |
290 | #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) | |
291 | #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) | |
292 | #define SCC_GSMRL_MODE_UART ((uint)0x00000004) | |
293 | #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) | |
294 | #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) | |
295 | #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) | |
296 | ||
297 | #define SCC_TODR_TOD ((ushort)0x8000) | |
298 | ||
299 | /* SCC Event and Mask register. | |
300 | */ | |
301 | #define SCCM_TXE ((unsigned char)0x10) | |
302 | #define SCCM_BSY ((unsigned char)0x04) | |
303 | #define SCCM_TX ((unsigned char)0x02) | |
304 | #define SCCM_RX ((unsigned char)0x01) | |
305 | ||
306 | typedef struct scc_param { | |
307 | ushort scc_rbase; /* Rx Buffer descriptor base address */ | |
308 | ushort scc_tbase; /* Tx Buffer descriptor base address */ | |
309 | u_char scc_rfcr; /* Rx function code */ | |
310 | u_char scc_tfcr; /* Tx function code */ | |
311 | ushort scc_mrblr; /* Max receive buffer length */ | |
312 | uint scc_rstate; /* Internal */ | |
313 | uint scc_idp; /* Internal */ | |
314 | ushort scc_rbptr; /* Internal */ | |
315 | ushort scc_ibc; /* Internal */ | |
316 | uint scc_rxtmp; /* Internal */ | |
317 | uint scc_tstate; /* Internal */ | |
318 | uint scc_tdp; /* Internal */ | |
319 | ushort scc_tbptr; /* Internal */ | |
320 | ushort scc_tbc; /* Internal */ | |
321 | uint scc_txtmp; /* Internal */ | |
322 | uint scc_rcrc; /* Internal */ | |
323 | uint scc_tcrc; /* Internal */ | |
324 | } sccp_t; | |
325 | ||
326 | /* Function code bits. | |
327 | */ | |
328 | #define SCC_EB ((u_char)0x10) /* Set big endian byte order */ | |
329 | ||
330 | /* CPM Ethernet through SCCx. | |
331 | */ | |
332 | typedef struct scc_enet { | |
333 | sccp_t sen_genscc; | |
334 | uint sen_cpres; /* Preset CRC */ | |
335 | uint sen_cmask; /* Constant mask for CRC */ | |
336 | uint sen_crcec; /* CRC Error counter */ | |
337 | uint sen_alec; /* alignment error counter */ | |
338 | uint sen_disfc; /* discard frame counter */ | |
339 | ushort sen_pads; /* Tx short frame pad character */ | |
340 | ushort sen_retlim; /* Retry limit threshold */ | |
341 | ushort sen_retcnt; /* Retry limit counter */ | |
342 | ushort sen_maxflr; /* maximum frame length register */ | |
343 | ushort sen_minflr; /* minimum frame length register */ | |
344 | ushort sen_maxd1; /* maximum DMA1 length */ | |
345 | ushort sen_maxd2; /* maximum DMA2 length */ | |
346 | ushort sen_maxd; /* Rx max DMA */ | |
347 | ushort sen_dmacnt; /* Rx DMA counter */ | |
348 | ushort sen_maxb; /* Max BD byte count */ | |
349 | ushort sen_gaddr1; /* Group address filter */ | |
350 | ushort sen_gaddr2; | |
351 | ushort sen_gaddr3; | |
352 | ushort sen_gaddr4; | |
353 | uint sen_tbuf0data0; /* Save area 0 - current frame */ | |
354 | uint sen_tbuf0data1; /* Save area 1 - current frame */ | |
355 | uint sen_tbuf0rba; /* Internal */ | |
356 | uint sen_tbuf0crc; /* Internal */ | |
357 | ushort sen_tbuf0bcnt; /* Internal */ | |
358 | ushort sen_paddrh; /* physical address (MSB) */ | |
359 | ushort sen_paddrm; | |
360 | ushort sen_paddrl; /* physical address (LSB) */ | |
361 | ushort sen_pper; /* persistence */ | |
362 | ushort sen_rfbdptr; /* Rx first BD pointer */ | |
363 | ushort sen_tfbdptr; /* Tx first BD pointer */ | |
364 | ushort sen_tlbdptr; /* Tx last BD pointer */ | |
365 | uint sen_tbuf1data0; /* Save area 0 - current frame */ | |
366 | uint sen_tbuf1data1; /* Save area 1 - current frame */ | |
367 | uint sen_tbuf1rba; /* Internal */ | |
368 | uint sen_tbuf1crc; /* Internal */ | |
369 | ushort sen_tbuf1bcnt; /* Internal */ | |
370 | ushort sen_txlen; /* Tx Frame length counter */ | |
371 | ushort sen_iaddr1; /* Individual address filter */ | |
372 | ushort sen_iaddr2; | |
373 | ushort sen_iaddr3; | |
374 | ushort sen_iaddr4; | |
375 | ushort sen_boffcnt; /* Backoff counter */ | |
376 | ||
377 | /* NOTE: Some versions of the manual have the following items | |
378 | * incorrectly documented. Below is the proper order. | |
379 | */ | |
380 | ushort sen_taddrh; /* temp address (MSB) */ | |
381 | ushort sen_taddrm; | |
382 | ushort sen_taddrl; /* temp address (LSB) */ | |
383 | } scc_enet_t; | |
384 | ||
385 | /* SCC Event register as used by Ethernet. | |
386 | */ | |
387 | #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ | |
388 | #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ | |
389 | #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ | |
390 | #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ | |
391 | #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ | |
392 | #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ | |
393 | ||
394 | /* SCC Mode Register (PMSR) as used by Ethernet. | |
395 | */ | |
396 | #define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */ | |
397 | #define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */ | |
398 | #define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */ | |
399 | #define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */ | |
400 | #define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ | |
401 | #define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */ | |
402 | #define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ | |
403 | #define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */ | |
404 | #define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */ | |
405 | #define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */ | |
406 | #define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */ | |
407 | #define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */ | |
408 | #define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */ | |
409 | ||
33d71d26 KG |
410 | /* SCC as UART |
411 | */ | |
412 | typedef struct scc_uart { | |
413 | sccp_t scc_genscc; | |
414 | char res1[8]; /* Reserved */ | |
415 | ushort scc_maxidl; /* Maximum idle chars */ | |
416 | ushort scc_idlc; /* temp idle counter */ | |
417 | ushort scc_brkcr; /* Break count register */ | |
418 | ushort scc_parec; /* receive parity error counter */ | |
419 | ushort scc_frmec; /* receive framing error counter */ | |
420 | ushort scc_nosec; /* receive noise counter */ | |
421 | ushort scc_brkec; /* receive break condition counter */ | |
422 | ushort scc_brkln; /* last received break length */ | |
423 | ushort scc_uaddr1; /* UART address character 1 */ | |
424 | ushort scc_uaddr2; /* UART address character 2 */ | |
425 | ushort scc_rtemp; /* Temp storage */ | |
426 | ushort scc_toseq; /* Transmit out of sequence char */ | |
427 | ushort scc_char1; /* control character 1 */ | |
428 | ushort scc_char2; /* control character 2 */ | |
429 | ushort scc_char3; /* control character 3 */ | |
430 | ushort scc_char4; /* control character 4 */ | |
431 | ushort scc_char5; /* control character 5 */ | |
432 | ushort scc_char6; /* control character 6 */ | |
433 | ushort scc_char7; /* control character 7 */ | |
434 | ushort scc_char8; /* control character 8 */ | |
435 | ushort scc_rccm; /* receive control character mask */ | |
436 | ushort scc_rccr; /* receive control character register */ | |
437 | ushort scc_rlbc; /* receive last break character */ | |
438 | } scc_uart_t; | |
439 | ||
440 | /* SCC Event and Mask registers when it is used as a UART. | |
441 | */ | |
442 | #define UART_SCCM_GLR ((ushort)0x1000) | |
443 | #define UART_SCCM_GLT ((ushort)0x0800) | |
444 | #define UART_SCCM_AB ((ushort)0x0200) | |
445 | #define UART_SCCM_IDL ((ushort)0x0100) | |
446 | #define UART_SCCM_GRA ((ushort)0x0080) | |
447 | #define UART_SCCM_BRKE ((ushort)0x0040) | |
448 | #define UART_SCCM_BRKS ((ushort)0x0020) | |
449 | #define UART_SCCM_CCR ((ushort)0x0008) | |
450 | #define UART_SCCM_BSY ((ushort)0x0004) | |
451 | #define UART_SCCM_TX ((ushort)0x0002) | |
452 | #define UART_SCCM_RX ((ushort)0x0001) | |
453 | ||
454 | /* The SCC PMSR when used as a UART. | |
455 | */ | |
456 | #define SCU_PSMR_FLC ((ushort)0x8000) | |
457 | #define SCU_PSMR_SL ((ushort)0x4000) | |
458 | #define SCU_PSMR_CL ((ushort)0x3000) | |
459 | #define SCU_PSMR_UM ((ushort)0x0c00) | |
460 | #define SCU_PSMR_FRZ ((ushort)0x0200) | |
461 | #define SCU_PSMR_RZS ((ushort)0x0100) | |
462 | #define SCU_PSMR_SYN ((ushort)0x0080) | |
463 | #define SCU_PSMR_DRT ((ushort)0x0040) | |
464 | #define SCU_PSMR_PEN ((ushort)0x0010) | |
465 | #define SCU_PSMR_RPM ((ushort)0x000c) | |
466 | #define SCU_PSMR_REVP ((ushort)0x0008) | |
467 | #define SCU_PSMR_TPM ((ushort)0x0003) | |
468 | #define SCU_PSMR_TEVP ((ushort)0x0002) | |
469 | ||
470 | /* CPM Transparent mode SCC. | |
471 | */ | |
472 | typedef struct scc_trans { | |
473 | sccp_t st_genscc; | |
474 | uint st_cpres; /* Preset CRC */ | |
475 | uint st_cmask; /* Constant mask for CRC */ | |
476 | } scc_trans_t; | |
477 | ||
33d71d26 KG |
478 | /* IIC parameter RAM. |
479 | */ | |
480 | typedef struct iic { | |
481 | ushort iic_rbase; /* Rx Buffer descriptor base address */ | |
482 | ushort iic_tbase; /* Tx Buffer descriptor base address */ | |
483 | u_char iic_rfcr; /* Rx function code */ | |
484 | u_char iic_tfcr; /* Tx function code */ | |
485 | ushort iic_mrblr; /* Max receive buffer length */ | |
486 | uint iic_rstate; /* Internal */ | |
487 | uint iic_rdp; /* Internal */ | |
488 | ushort iic_rbptr; /* Internal */ | |
489 | ushort iic_rbc; /* Internal */ | |
490 | uint iic_rxtmp; /* Internal */ | |
491 | uint iic_tstate; /* Internal */ | |
492 | uint iic_tdp; /* Internal */ | |
493 | ushort iic_tbptr; /* Internal */ | |
494 | ushort iic_tbc; /* Internal */ | |
495 | uint iic_txtmp; /* Internal */ | |
496 | char res1[4]; /* Reserved */ | |
497 | ushort iic_rpbase; /* Relocation pointer */ | |
498 | char res2[2]; /* Reserved */ | |
499 | } iic_t; | |
500 | ||
33d71d26 KG |
501 | /* SPI parameter RAM. |
502 | */ | |
503 | typedef struct spi { | |
504 | ushort spi_rbase; /* Rx Buffer descriptor base address */ | |
505 | ushort spi_tbase; /* Tx Buffer descriptor base address */ | |
506 | u_char spi_rfcr; /* Rx function code */ | |
507 | u_char spi_tfcr; /* Tx function code */ | |
508 | ushort spi_mrblr; /* Max receive buffer length */ | |
509 | uint spi_rstate; /* Internal */ | |
510 | uint spi_rdp; /* Internal */ | |
511 | ushort spi_rbptr; /* Internal */ | |
512 | ushort spi_rbc; /* Internal */ | |
513 | uint spi_rxtmp; /* Internal */ | |
514 | uint spi_tstate; /* Internal */ | |
515 | uint spi_tdp; /* Internal */ | |
516 | ushort spi_tbptr; /* Internal */ | |
517 | ushort spi_tbc; /* Internal */ | |
518 | uint spi_txtmp; /* Internal */ | |
519 | uint spi_res; | |
520 | ushort spi_rpbase; /* Relocation pointer */ | |
521 | ushort spi_res2; | |
522 | } spi_t; | |
523 | ||
524 | /* SPI Mode register. | |
525 | */ | |
526 | #define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ | |
527 | #define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ | |
528 | #define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ | |
529 | #define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ | |
530 | #define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ | |
531 | #define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ | |
532 | #define SPMODE_EN ((ushort)0x0100) /* Enable */ | |
533 | #define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ | |
534 | #define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ | |
535 | #define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ | |
536 | #define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ | |
537 | #define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ | |
538 | ||
539 | /* SPIE fields */ | |
540 | #define SPIE_MME 0x20 | |
541 | #define SPIE_TXE 0x10 | |
542 | #define SPIE_BSY 0x04 | |
543 | #define SPIE_TXB 0x02 | |
544 | #define SPIE_RXB 0x01 | |
545 | ||
546 | /* | |
547 | * RISC Controller Configuration Register definitons | |
548 | */ | |
549 | #define RCCR_TIME 0x8000 /* RISC Timer Enable */ | |
550 | #define RCCR_TIMEP(t) (((t) & 0x3F)<<8) /* RISC Timer Period */ | |
551 | #define RCCR_TIME_MASK 0x00FF /* not RISC Timer related bits */ | |
552 | ||
553 | /* RISC Timer Parameter RAM offset */ | |
554 | #define PROFF_RTMR ((uint)0x01B0) | |
555 | ||
556 | typedef struct risc_timer_pram { | |
557 | unsigned short tm_base; /* RISC Timer Table Base Address */ | |
558 | unsigned short tm_ptr; /* RISC Timer Table Pointer (internal) */ | |
559 | unsigned short r_tmr; /* RISC Timer Mode Register */ | |
560 | unsigned short r_tmv; /* RISC Timer Valid Register */ | |
561 | unsigned long tm_cmd; /* RISC Timer Command Register */ | |
562 | unsigned long tm_cnt; /* RISC Timer Internal Count */ | |
563 | } rt_pram_t; | |
564 | ||
565 | /* Bits in RISC Timer Command Register */ | |
566 | #define TM_CMD_VALID 0x80000000 /* Valid - Enables the timer */ | |
567 | #define TM_CMD_RESTART 0x40000000 /* Restart - for automatic restart */ | |
568 | #define TM_CMD_PWM 0x20000000 /* Run in Pulse Width Modulation Mode */ | |
569 | #define TM_CMD_NUM(n) (((n)&0xF)<<16) /* Timer Number */ | |
570 | #define TM_CMD_PERIOD(p) ((p)&0xFFFF) /* Timer Period */ | |
571 | ||
572 | /* CPM interrupts. There are nearly 32 interrupts generated by CPM | |
573 | * channels or devices. All of these are presented to the PPC core | |
574 | * as a single interrupt. The CPM interrupt handler dispatches its | |
575 | * own handlers, in a similar fashion to the PPC core handler. We | |
576 | * use the table as defined in the manuals (i.e. no special high | |
577 | * priority and SCC1 == SCCa, etc...). | |
578 | */ | |
579 | #define CPMVEC_NR 32 | |
580 | #define CPMVEC_PIO_PC15 ((ushort)0x1f) | |
581 | #define CPMVEC_SCC1 ((ushort)0x1e) | |
582 | #define CPMVEC_SCC2 ((ushort)0x1d) | |
583 | #define CPMVEC_SCC3 ((ushort)0x1c) | |
584 | #define CPMVEC_SCC4 ((ushort)0x1b) | |
585 | #define CPMVEC_PIO_PC14 ((ushort)0x1a) | |
586 | #define CPMVEC_TIMER1 ((ushort)0x19) | |
587 | #define CPMVEC_PIO_PC13 ((ushort)0x18) | |
588 | #define CPMVEC_PIO_PC12 ((ushort)0x17) | |
589 | #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) | |
590 | #define CPMVEC_IDMA1 ((ushort)0x15) | |
591 | #define CPMVEC_IDMA2 ((ushort)0x14) | |
592 | #define CPMVEC_TIMER2 ((ushort)0x12) | |
593 | #define CPMVEC_RISCTIMER ((ushort)0x11) | |
594 | #define CPMVEC_I2C ((ushort)0x10) | |
595 | #define CPMVEC_PIO_PC11 ((ushort)0x0f) | |
596 | #define CPMVEC_PIO_PC10 ((ushort)0x0e) | |
597 | #define CPMVEC_TIMER3 ((ushort)0x0c) | |
598 | #define CPMVEC_PIO_PC9 ((ushort)0x0b) | |
599 | #define CPMVEC_PIO_PC8 ((ushort)0x0a) | |
600 | #define CPMVEC_PIO_PC7 ((ushort)0x09) | |
601 | #define CPMVEC_TIMER4 ((ushort)0x07) | |
602 | #define CPMVEC_PIO_PC6 ((ushort)0x06) | |
603 | #define CPMVEC_SPI ((ushort)0x05) | |
604 | #define CPMVEC_SMC1 ((ushort)0x04) | |
605 | #define CPMVEC_SMC2 ((ushort)0x03) | |
606 | #define CPMVEC_PIO_PC5 ((ushort)0x02) | |
607 | #define CPMVEC_PIO_PC4 ((ushort)0x01) | |
608 | #define CPMVEC_ERROR ((ushort)0x00) | |
609 | ||
610 | /* CPM interrupt configuration vector. | |
611 | */ | |
612 | #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ | |
613 | #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ | |
614 | #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ | |
615 | #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ | |
567e9fdd | 616 | #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ |
33d71d26 KG |
617 | #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ |
618 | #define CICR_IEN ((uint)0x00000080) /* Int. enable */ | |
619 | #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ | |
620 | ||
fb533d0c SW |
621 | #define IMAP_ADDR (get_immrbase()) |
622 | ||
663edbd2 SW |
623 | #define CPM_PIN_INPUT 0 |
624 | #define CPM_PIN_OUTPUT 1 | |
625 | #define CPM_PIN_PRIMARY 0 | |
626 | #define CPM_PIN_SECONDARY 2 | |
627 | #define CPM_PIN_GPIO 4 | |
628 | #define CPM_PIN_OPENDRAIN 8 | |
629 | ||
630 | enum cpm_port { | |
631 | CPM_PORTA, | |
632 | CPM_PORTB, | |
633 | CPM_PORTC, | |
634 | CPM_PORTD, | |
635 | CPM_PORTE, | |
636 | }; | |
637 | ||
638 | void cpm1_set_pin(enum cpm_port port, int pin, int flags); | |
639 | ||
640 | enum cpm_clk_dir { | |
641 | CPM_CLK_RX, | |
642 | CPM_CLK_TX, | |
643 | CPM_CLK_RTX | |
644 | }; | |
645 | ||
646 | enum cpm_clk_target { | |
647 | CPM_CLK_SCC1, | |
648 | CPM_CLK_SCC2, | |
649 | CPM_CLK_SCC3, | |
650 | CPM_CLK_SCC4, | |
651 | CPM_CLK_SMC1, | |
652 | CPM_CLK_SMC2, | |
653 | }; | |
654 | ||
655 | enum cpm_clk { | |
656 | CPM_BRG1, /* Baud Rate Generator 1 */ | |
657 | CPM_BRG2, /* Baud Rate Generator 2 */ | |
658 | CPM_BRG3, /* Baud Rate Generator 3 */ | |
659 | CPM_BRG4, /* Baud Rate Generator 4 */ | |
660 | CPM_CLK1, /* Clock 1 */ | |
661 | CPM_CLK2, /* Clock 2 */ | |
662 | CPM_CLK3, /* Clock 3 */ | |
663 | CPM_CLK4, /* Clock 4 */ | |
664 | CPM_CLK5, /* Clock 5 */ | |
665 | CPM_CLK6, /* Clock 6 */ | |
666 | CPM_CLK7, /* Clock 7 */ | |
667 | CPM_CLK8, /* Clock 8 */ | |
668 | }; | |
669 | ||
670 | int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode); | |
671 | ||
b5677d84 | 672 | #endif /* __CPM1__ */ |