Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * linux/include/asm-arm/hardware/serial_amba.h | |
3 | * | |
4 | * Internal header file for AMBA serial ports | |
5 | * | |
6 | * Copyright (C) ARM Limited | |
7 | * Copyright (C) 2000 Deep Blue Solutions Ltd. | |
8 | * | |
9 | * This program is free software; you can redistribute it and/or modify | |
10 | * it under the terms of the GNU General Public License as published by | |
11 | * the Free Software Foundation; either version 2 of the License, or | |
12 | * (at your option) any later version. | |
13 | * | |
14 | * This program is distributed in the hope that it will be useful, | |
15 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
16 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
17 | * GNU General Public License for more details. | |
18 | * | |
19 | * You should have received a copy of the GNU General Public License | |
20 | * along with this program; if not, write to the Free Software | |
21 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
22 | */ | |
23 | #ifndef ASM_ARM_HARDWARE_SERIAL_AMBA_H | |
24 | #define ASM_ARM_HARDWARE_SERIAL_AMBA_H | |
25 | ||
26 | /* ------------------------------------------------------------------------------- | |
27 | * From AMBA UART (PL010) Block Specification | |
28 | * ------------------------------------------------------------------------------- | |
29 | * UART Register Offsets. | |
30 | */ | |
31 | #define UART01x_DR 0x00 /* Data read or written from the interface. */ | |
32 | #define UART01x_RSR 0x04 /* Receive status register (Read). */ | |
33 | #define UART01x_ECR 0x04 /* Error clear register (Write). */ | |
34 | #define UART010_LCRH 0x08 /* Line control register, high byte. */ | |
35 | #define UART010_LCRM 0x0C /* Line control register, middle byte. */ | |
36 | #define UART010_LCRL 0x10 /* Line control register, low byte. */ | |
37 | #define UART010_CR 0x14 /* Control register. */ | |
38 | #define UART01x_FR 0x18 /* Flag register (Read only). */ | |
39 | #define UART010_IIR 0x1C /* Interrupt indentification register (Read). */ | |
40 | #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ | |
41 | #define UART01x_ILPR 0x20 /* IrDA low power counter register. */ | |
42 | #define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ | |
43 | #define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ | |
44 | #define UART011_LCRH 0x2c /* Line control register. */ | |
45 | #define UART011_CR 0x30 /* Control register. */ | |
46 | #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ | |
47 | #define UART011_IMSC 0x38 /* Interrupt mask. */ | |
48 | #define UART011_RIS 0x3c /* Raw interrupt status. */ | |
49 | #define UART011_MIS 0x40 /* Masked interrupt status. */ | |
50 | #define UART011_ICR 0x44 /* Interrupt clear register. */ | |
51 | #define UART011_DMACR 0x48 /* DMA control register. */ | |
52 | ||
b63d4f0f RK |
53 | #define UART011_DR_OE (1 << 11) |
54 | #define UART011_DR_BE (1 << 10) | |
55 | #define UART011_DR_PE (1 << 9) | |
56 | #define UART011_DR_FE (1 << 8) | |
57 | ||
1da177e4 LT |
58 | #define UART01x_RSR_OE 0x08 |
59 | #define UART01x_RSR_BE 0x04 | |
60 | #define UART01x_RSR_PE 0x02 | |
61 | #define UART01x_RSR_FE 0x01 | |
62 | ||
63 | #define UART011_FR_RI 0x100 | |
64 | #define UART011_FR_TXFE 0x080 | |
65 | #define UART011_FR_RXFF 0x040 | |
66 | #define UART01x_FR_TXFF 0x020 | |
67 | #define UART01x_FR_RXFE 0x010 | |
68 | #define UART01x_FR_BUSY 0x008 | |
69 | #define UART01x_FR_DCD 0x004 | |
70 | #define UART01x_FR_DSR 0x002 | |
71 | #define UART01x_FR_CTS 0x001 | |
72 | #define UART01x_FR_TMSK (UART01x_FR_TXFF + UART01x_FR_BUSY) | |
73 | ||
74 | #define UART011_CR_CTSEN 0x8000 /* CTS hardware flow control */ | |
75 | #define UART011_CR_RTSEN 0x4000 /* RTS hardware flow control */ | |
76 | #define UART011_CR_OUT2 0x2000 /* OUT2 */ | |
77 | #define UART011_CR_OUT1 0x1000 /* OUT1 */ | |
78 | #define UART011_CR_RTS 0x0800 /* RTS */ | |
79 | #define UART011_CR_DTR 0x0400 /* DTR */ | |
80 | #define UART011_CR_RXE 0x0200 /* receive enable */ | |
81 | #define UART011_CR_TXE 0x0100 /* transmit enable */ | |
82 | #define UART011_CR_LBE 0x0080 /* loopback enable */ | |
83 | #define UART010_CR_RTIE 0x0040 | |
84 | #define UART010_CR_TIE 0x0020 | |
85 | #define UART010_CR_RIE 0x0010 | |
86 | #define UART010_CR_MSIE 0x0008 | |
87 | #define UART01x_CR_IIRLP 0x0004 /* SIR low power mode */ | |
88 | #define UART01x_CR_SIREN 0x0002 /* SIR enable */ | |
89 | #define UART01x_CR_UARTEN 0x0001 /* UART enable */ | |
90 | ||
91 | #define UART011_LCRH_SPS 0x80 | |
92 | #define UART01x_LCRH_WLEN_8 0x60 | |
93 | #define UART01x_LCRH_WLEN_7 0x40 | |
94 | #define UART01x_LCRH_WLEN_6 0x20 | |
95 | #define UART01x_LCRH_WLEN_5 0x00 | |
96 | #define UART01x_LCRH_FEN 0x10 | |
97 | #define UART01x_LCRH_STP2 0x08 | |
98 | #define UART01x_LCRH_EPS 0x04 | |
99 | #define UART01x_LCRH_PEN 0x02 | |
100 | #define UART01x_LCRH_BRK 0x01 | |
101 | ||
102 | #define UART010_IIR_RTIS 0x08 | |
103 | #define UART010_IIR_TIS 0x04 | |
104 | #define UART010_IIR_RIS 0x02 | |
105 | #define UART010_IIR_MIS 0x01 | |
106 | ||
107 | #define UART011_IFLS_RX1_8 (0 << 3) | |
108 | #define UART011_IFLS_RX2_8 (1 << 3) | |
109 | #define UART011_IFLS_RX4_8 (2 << 3) | |
110 | #define UART011_IFLS_RX6_8 (3 << 3) | |
111 | #define UART011_IFLS_RX7_8 (4 << 3) | |
112 | #define UART011_IFLS_TX1_8 (0 << 0) | |
113 | #define UART011_IFLS_TX2_8 (1 << 0) | |
114 | #define UART011_IFLS_TX4_8 (2 << 0) | |
115 | #define UART011_IFLS_TX6_8 (3 << 0) | |
116 | #define UART011_IFLS_TX7_8 (4 << 0) | |
5926a295 AR |
117 | /* special values for ST vendor with deeper fifo */ |
118 | #define UART011_IFLS_RX_HALF (5 << 3) | |
119 | #define UART011_IFLS_TX_HALF (5 << 0) | |
1da177e4 LT |
120 | |
121 | #define UART011_OEIM (1 << 10) /* overrun error interrupt mask */ | |
122 | #define UART011_BEIM (1 << 9) /* break error interrupt mask */ | |
123 | #define UART011_PEIM (1 << 8) /* parity error interrupt mask */ | |
124 | #define UART011_FEIM (1 << 7) /* framing error interrupt mask */ | |
125 | #define UART011_RTIM (1 << 6) /* receive timeout interrupt mask */ | |
126 | #define UART011_TXIM (1 << 5) /* transmit interrupt mask */ | |
127 | #define UART011_RXIM (1 << 4) /* receive interrupt mask */ | |
128 | #define UART011_DSRMIM (1 << 3) /* DSR interrupt mask */ | |
129 | #define UART011_DCDMIM (1 << 2) /* DCD interrupt mask */ | |
130 | #define UART011_CTSMIM (1 << 1) /* CTS interrupt mask */ | |
131 | #define UART011_RIMIM (1 << 0) /* RI interrupt mask */ | |
132 | ||
133 | #define UART011_OEIS (1 << 10) /* overrun error interrupt status */ | |
134 | #define UART011_BEIS (1 << 9) /* break error interrupt status */ | |
135 | #define UART011_PEIS (1 << 8) /* parity error interrupt status */ | |
136 | #define UART011_FEIS (1 << 7) /* framing error interrupt status */ | |
137 | #define UART011_RTIS (1 << 6) /* receive timeout interrupt status */ | |
138 | #define UART011_TXIS (1 << 5) /* transmit interrupt status */ | |
139 | #define UART011_RXIS (1 << 4) /* receive interrupt status */ | |
140 | #define UART011_DSRMIS (1 << 3) /* DSR interrupt status */ | |
141 | #define UART011_DCDMIS (1 << 2) /* DCD interrupt status */ | |
142 | #define UART011_CTSMIS (1 << 1) /* CTS interrupt status */ | |
143 | #define UART011_RIMIS (1 << 0) /* RI interrupt status */ | |
144 | ||
145 | #define UART011_OEIC (1 << 10) /* overrun error interrupt clear */ | |
146 | #define UART011_BEIC (1 << 9) /* break error interrupt clear */ | |
147 | #define UART011_PEIC (1 << 8) /* parity error interrupt clear */ | |
148 | #define UART011_FEIC (1 << 7) /* framing error interrupt clear */ | |
149 | #define UART011_RTIC (1 << 6) /* receive timeout interrupt clear */ | |
150 | #define UART011_TXIC (1 << 5) /* transmit interrupt clear */ | |
151 | #define UART011_RXIC (1 << 4) /* receive interrupt clear */ | |
152 | #define UART011_DSRMIC (1 << 3) /* DSR interrupt clear */ | |
153 | #define UART011_DCDMIC (1 << 2) /* DCD interrupt clear */ | |
154 | #define UART011_CTSMIC (1 << 1) /* CTS interrupt clear */ | |
155 | #define UART011_RIMIC (1 << 0) /* RI interrupt clear */ | |
156 | ||
157 | #define UART011_DMAONERR (1 << 2) /* disable dma on error */ | |
158 | #define UART011_TXDMAE (1 << 1) /* enable transmit dma */ | |
159 | #define UART011_RXDMAE (1 << 0) /* enable receive dma */ | |
160 | ||
161 | #define UART01x_RSR_ANY (UART01x_RSR_OE|UART01x_RSR_BE|UART01x_RSR_PE|UART01x_RSR_FE) | |
162 | #define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS) | |
163 | ||
fbb18a27 | 164 | #ifndef __ASSEMBLY__ |
aa853f85 | 165 | struct amba_device; /* in uncompress this is included but amba/bus.h is not */ |
fbb18a27 RK |
166 | struct amba_pl010_data { |
167 | void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl); | |
168 | }; | |
169 | #endif | |
170 | ||
1da177e4 | 171 | #endif |