projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
sctp: Mark GET_PEER|LOCAL_ADDR_OLD deprecated.
[deliverable/linux.git] / include / linux / ethtool.h
CommitLineData
1da177e4
LT		 1/*
2 * ethtool.h: Defines for Linux ethtool.
3 *
4 * Copyright (C) 1998 David S. Miller (davem@redhat.com)
5 * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
6 * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
7 * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
8 * christopher.leech@intel.com,
9 * scott.feldman@intel.com)
10 */
11
12#ifndef _LINUX_ETHTOOL_H
13#define _LINUX_ETHTOOL_H
14
e621e691 15#include <linux/types.h>
1da177e4
LT		 16
17/* This should work for both 32 and 64 bit userland. */
18struct ethtool_cmd {
c3ce7e20
DW		 19 __u32 cmd;
20 __u32 supported; /* Features this interface supports */
21 __u32 advertising; /* Features this interface advertises */
22 __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
23 __u8 duplex; /* Duplex, half or full */
24 __u8 port; /* Which connector port */
25 __u8 phy_address;
26 __u8 transceiver; /* Which transceiver to use */
27 __u8 autoneg; /* Enable or disable autonegotiation */
28 __u32 maxtxpkt; /* Tx pkts before generating tx int */
29 __u32 maxrxpkt; /* Rx pkts before generating rx int */
30 __u32 reserved[4];
1da177e4
LT		 31};
32
33#define ETHTOOL_BUSINFO_LEN 32
34/* these strings are set to whatever the driver author decides... */
35struct ethtool_drvinfo {
c3ce7e20 36 __u32 cmd;
1da177e4
LT		 37 char driver[32]; /* driver short name, "tulip", "eepro100" */
38 char version[32]; /* driver version string */
39 char fw_version[32]; /* firmware version string, if applicable */
40 char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
41 /* For PCI devices, use pci_name(pci_dev). */
42 char reserved1[32];
339bf024
JG		 43 char reserved2[12];
44 __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
c3ce7e20
DW		 45 __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
46 __u32 testinfo_len;
47 __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
48 __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
1da177e4
LT		 49};
50
51#define SOPASS_MAX 6
52/* wake-on-lan settings */
53struct ethtool_wolinfo {
c3ce7e20
DW		 54 __u32 cmd;
55 __u32 supported;
56 __u32 wolopts;
57 __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
1da177e4
LT		 58};
59
60/* for passing single values */
61struct ethtool_value {
c3ce7e20
DW		 62 __u32 cmd;
63 __u32 data;
1da177e4
LT		 64};
65
66/* for passing big chunks of data */
67struct ethtool_regs {
c3ce7e20
DW		 68 __u32 cmd;
69 __u32 version; /* driver-specific, indicates different chips/revs */
70 __u32 len; /* bytes */
71 __u8 data[0];
1da177e4
LT		 72};
73
74/* for passing EEPROM chunks */
75struct ethtool_eeprom {
c3ce7e20
DW		 76 __u32 cmd;
77 __u32 magic;
78 __u32 offset; /* in bytes */
79 __u32 len; /* in bytes */
80 __u8 data[0];
1da177e4
LT		 81};
82
83/* for configuring coalescing parameters of chip */
84struct ethtool_coalesce {
c3ce7e20 85 __u32 cmd; /* ETHTOOL_{G,S}COALESCE */
1da177e4
LT		 86
87 /* How many usecs to delay an RX interrupt after
88 * a packet arrives. If 0, only rx_max_coalesced_frames
89 * is used.
90 */
c3ce7e20 91 __u32 rx_coalesce_usecs;
1da177e4
LT		 92
93 /* How many packets to delay an RX interrupt after
94 * a packet arrives. If 0, only rx_coalesce_usecs is
95 * used. It is illegal to set both usecs and max frames
96 * to zero as this would cause RX interrupts to never be
97 * generated.
98 */
c3ce7e20 99 __u32 rx_max_coalesced_frames;
1da177e4
LT		 100
101 /* Same as above two parameters, except that these values
102 * apply while an IRQ is being serviced by the host. Not
103 * all cards support this feature and the values are ignored
104 * in that case.
105 */
c3ce7e20
DW		 106 __u32 rx_coalesce_usecs_irq;
107 __u32 rx_max_coalesced_frames_irq;
1da177e4
LT		 108
109 /* How many usecs to delay a TX interrupt after
110 * a packet is sent. If 0, only tx_max_coalesced_frames
111 * is used.
112 */
c3ce7e20 113 __u32 tx_coalesce_usecs;
1da177e4
LT		 114
115 /* How many packets to delay a TX interrupt after
116 * a packet is sent. If 0, only tx_coalesce_usecs is
117 * used. It is illegal to set both usecs and max frames
118 * to zero as this would cause TX interrupts to never be
119 * generated.
120 */
c3ce7e20 121 __u32 tx_max_coalesced_frames;
1da177e4
LT		 122
123 /* Same as above two parameters, except that these values
124 * apply while an IRQ is being serviced by the host. Not
125 * all cards support this feature and the values are ignored
126 * in that case.
127 */
c3ce7e20
DW		 128 __u32 tx_coalesce_usecs_irq;
129 __u32 tx_max_coalesced_frames_irq;
1da177e4
LT		 130
131 /* How many usecs to delay in-memory statistics
132 * block updates. Some drivers do not have an in-memory
133 * statistic block, and in such cases this value is ignored.
134 * This value must not be zero.
135 */
c3ce7e20 136 __u32 stats_block_coalesce_usecs;
1da177e4
LT		 137
138 /* Adaptive RX/TX coalescing is an algorithm implemented by
139 * some drivers to improve latency under low packet rates and
140 * improve throughput under high packet rates. Some drivers
141 * only implement one of RX or TX adaptive coalescing. Anything
142 * not implemented by the driver causes these values to be
143 * silently ignored.
144 */
c3ce7e20
DW		 145 __u32 use_adaptive_rx_coalesce;
146 __u32 use_adaptive_tx_coalesce;
1da177e4
LT		 147
148 /* When the packet rate (measured in packets per second)
149 * is below pkt_rate_low, the {rx,tx}_*_low parameters are
150 * used.
151 */
c3ce7e20
DW		 152 __u32 pkt_rate_low;
153 __u32 rx_coalesce_usecs_low;
154 __u32 rx_max_coalesced_frames_low;
155 __u32 tx_coalesce_usecs_low;
156 __u32 tx_max_coalesced_frames_low;
1da177e4
LT		 157
158 /* When the packet rate is below pkt_rate_high but above
159 * pkt_rate_low (both measured in packets per second) the
160 * normal {rx,tx}_* coalescing parameters are used.
161 */
162
163 /* When the packet rate is (measured in packets per second)
164 * is above pkt_rate_high, the {rx,tx}_*_high parameters are
165 * used.
166 */
c3ce7e20
DW		 167 __u32 pkt_rate_high;
168 __u32 rx_coalesce_usecs_high;
169 __u32 rx_max_coalesced_frames_high;
170 __u32 tx_coalesce_usecs_high;
171 __u32 tx_max_coalesced_frames_high;
1da177e4
LT		 172
173 /* How often to do adaptive coalescing packet rate sampling,
174 * measured in seconds. Must not be zero.
175 */
c3ce7e20 176 __u32 rate_sample_interval;
1da177e4
LT		 177};
178
179/* for configuring RX/TX ring parameters */
180struct ethtool_ringparam {
c3ce7e20 181 __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
1da177e4
LT		 182
183 /* Read only attributes. These indicate the maximum number
184 * of pending RX/TX ring entries the driver will allow the
185 * user to set.
186 */
c3ce7e20
DW		 187 __u32 rx_max_pending;
188 __u32 rx_mini_max_pending;
189 __u32 rx_jumbo_max_pending;
190 __u32 tx_max_pending;
1da177e4
LT		 191
192 /* Values changeable by the user. The valid values are
193 * in the range 1 to the "*_max_pending" counterpart above.
194 */
c3ce7e20
DW		 195 __u32 rx_pending;
196 __u32 rx_mini_pending;
197 __u32 rx_jumbo_pending;
198 __u32 tx_pending;
1da177e4
LT		 199};
200
201/* for configuring link flow control parameters */
202struct ethtool_pauseparam {
c3ce7e20 203 __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
1da177e4
LT		 204
205 /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
206 * being true) the user may set 'autonet' here non-zero to have the
207 * pause parameters be auto-negotiated too. In such a case, the
208 * {rx,tx}_pause values below determine what capabilities are
209 * advertised.
210 *
211 * If 'autoneg' is zero or the link is not being auto-negotiated,
212 * then {rx,tx}_pause force the driver to use/not-use pause
213 * flow control.
214 */
c3ce7e20
DW		 215 __u32 autoneg;
216 __u32 rx_pause;
217 __u32 tx_pause;
1da177e4
LT		 218};
219
220#define ETH_GSTRING_LEN 32
221enum ethtool_stringset {
222 ETH_SS_TEST = 0,
223 ETH_SS_STATS,
339bf024 224 ETH_SS_PRIV_FLAGS,
1da177e4
LT		 225};
226
227/* for passing string sets for data tagging */
228struct ethtool_gstrings {
c3ce7e20
DW		 229 __u32 cmd; /* ETHTOOL_GSTRINGS */
230 __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
231 __u32 len; /* number of strings in the string set */
232 __u8 data[0];
1da177e4
LT		 233};
234
235enum ethtool_test_flags {
236 ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
237 ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
238};
239
240/* for requesting NIC test and getting results*/
241struct ethtool_test {
c3ce7e20
DW		 242 __u32 cmd; /* ETHTOOL_TEST */
243 __u32 flags; /* ETH_TEST_FL_xxx */
244 __u32 reserved;
245 __u32 len; /* result length, in number of u64 elements */
246 __u64 data[0];
1da177e4
LT		 247};
248
249/* for dumping NIC-specific statistics */
250struct ethtool_stats {
c3ce7e20
DW		 251 __u32 cmd; /* ETHTOOL_GSTATS */
252 __u32 n_stats; /* number of u64's being returned */
253 __u64 data[0];
1da177e4
LT		 254};
255
a6f9a705 256struct ethtool_perm_addr {
c3ce7e20
DW		 257 __u32 cmd; /* ETHTOOL_GPERMADDR */
258 __u32 size;
259 __u8 data[0];
a6f9a705
JW		 260};
261
3ae7c0b2
JG		 262/* boolean flags controlling per-interface behavior characteristics.
263 * When reading, the flag indicates whether or not a certain behavior
264 * is enabled/present. When writing, the flag indicates whether
265 * or not the driver should turn on (set) or off (clear) a behavior.
266 *
267 * Some behaviors may read-only (unconditionally absent or present).
268 * If such is the case, return EINVAL in the set-flags operation if the
269 * flag differs from the read-only value.
270 */
271enum ethtool_flags {
272 ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
273};
274
c3ce7e20
DW		 275#ifdef __KERNEL__
276
1da177e4
LT		 277struct net_device;
278
279/* Some generic methods drivers may use in their ethtool_ops */
280u32 ethtool_op_get_link(struct net_device *dev);
281u32 ethtool_op_get_tx_csum(struct net_device *dev);
282int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
69f6a0fa 283int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
6460d948 284int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
1da177e4
LT		 285u32 ethtool_op_get_sg(struct net_device *dev);
286int ethtool_op_set_sg(struct net_device *dev, u32 data);
287u32 ethtool_op_get_tso(struct net_device *dev);
288int ethtool_op_set_tso(struct net_device *dev, u32 data);
e89e9cf5
AR		 289u32 ethtool_op_get_ufo(struct net_device *dev);
290int ethtool_op_set_ufo(struct net_device *dev, u32 data);
3ae7c0b2
JG		 291u32 ethtool_op_get_flags(struct net_device *dev);
292int ethtool_op_set_flags(struct net_device *dev, u32 data);
1da177e4
LT		 293
294/**
295 * &ethtool_ops - Alter and report network device settings
296 * get_settings: Get device-specific settings
297 * set_settings: Set device-specific settings
298 * get_drvinfo: Report driver information
299 * get_regs: Get device registers
300 * get_wol: Report whether Wake-on-Lan is enabled
301 * set_wol: Turn Wake-on-Lan on or off
302 * get_msglevel: Report driver message level
303 * set_msglevel: Set driver message level
304 * nway_reset: Restart autonegotiation
305 * get_link: Get link status
306 * get_eeprom: Read data from the device EEPROM
307 * set_eeprom: Write data to the device EEPROM
308 * get_coalesce: Get interrupt coalescing parameters
309 * set_coalesce: Set interrupt coalescing parameters
310 * get_ringparam: Report ring sizes
311 * set_ringparam: Set ring sizes
312 * get_pauseparam: Report pause parameters
fd3f8984 313 * set_pauseparam: Set pause parameters
1da177e4
LT		 314 * get_rx_csum: Report whether receive checksums are turned on or off
315 * set_rx_csum: Turn receive checksum on or off
316 * get_tx_csum: Report whether transmit checksums are turned on or off
317 * set_tx_csum: Turn transmit checksums on or off
318 * get_sg: Report whether scatter-gather is enabled
319 * set_sg: Turn scatter-gather on or off
320 * get_tso: Report whether TCP segmentation offload is enabled
321 * set_tso: Turn TCP segmentation offload on or off
e89e9cf5
AR		 322 * get_ufo: Report whether UDP fragmentation offload is enabled
323 * set_ufo: Turn UDP fragmentation offload on or off
1da177e4
LT		 324 * self_test: Run specified self-tests
325 * get_strings: Return a set of strings that describe the requested objects
326 * phys_id: Identify the device
327 * get_stats: Return statistics about the device
3ae7c0b2
JG		 328 * get_flags: get 32-bit flags bitmap
329 * set_flags: set 32-bit flags bitmap
a6f9a705 330 *
1da177e4
LT		 331 * Description:
332 *
333 * get_settings:
334 * @get_settings is passed an &ethtool_cmd to fill in. It returns
335 * an negative errno or zero.
336 *
337 * set_settings:
338 * @set_settings is passed an &ethtool_cmd and should attempt to set
339 * all the settings this device supports. It may return an error value
340 * if something goes wrong (otherwise 0).
341 *
342 * get_eeprom:
343 * Should fill in the magic field. Don't need to check len for zero
344 * or wraparound. Fill in the data argument with the eeprom values
345 * from offset to offset + len. Update len to the amount read.
346 * Returns an error or zero.
347 *
348 * set_eeprom:
349 * Should validate the magic field. Don't need to check len for zero
350 * or wraparound. Update len to the amount written. Returns an error
351 * or zero.
352 */
353struct ethtool_ops {
354 int (*get_settings)(struct net_device *, struct ethtool_cmd *);
355 int (*set_settings)(struct net_device *, struct ethtool_cmd *);
356 void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *);
357 int (*get_regs_len)(struct net_device *);
358 void (*get_regs)(struct net_device *, struct ethtool_regs *, void *);
359 void (*get_wol)(struct net_device *, struct ethtool_wolinfo *);
360 int (*set_wol)(struct net_device *, struct ethtool_wolinfo *);
361 u32 (*get_msglevel)(struct net_device *);
362 void (*set_msglevel)(struct net_device *, u32);
363 int (*nway_reset)(struct net_device *);
364 u32 (*get_link)(struct net_device *);
365 int (*get_eeprom_len)(struct net_device *);
366 int (*get_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
367 int (*set_eeprom)(struct net_device *, struct ethtool_eeprom *, u8 *);
368 int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *);
369 int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *);
370 void (*get_ringparam)(struct net_device *, struct ethtool_ringparam *);
371 int (*set_ringparam)(struct net_device *, struct ethtool_ringparam *);
372 void (*get_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
373 int (*set_pauseparam)(struct net_device *, struct ethtool_pauseparam*);
374 u32 (*get_rx_csum)(struct net_device *);
375 int (*set_rx_csum)(struct net_device *, u32);
376 u32 (*get_tx_csum)(struct net_device *);
377 int (*set_tx_csum)(struct net_device *, u32);
378 u32 (*get_sg)(struct net_device *);
379 int (*set_sg)(struct net_device *, u32);
380 u32 (*get_tso)(struct net_device *);
381 int (*set_tso)(struct net_device *, u32);
1da177e4
LT		 382 void (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
383 void (*get_strings)(struct net_device *, u32 stringset, u8 *);
384 int (*phys_id)(struct net_device *, u32);
1da177e4
LT		 385 void (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
386 int (*begin)(struct net_device *);
387 void (*complete)(struct net_device *);
e89e9cf5
AR		 388 u32 (*get_ufo)(struct net_device *);
389 int (*set_ufo)(struct net_device *, u32);
3ae7c0b2
JG		 390 u32 (*get_flags)(struct net_device *);
391 int (*set_flags)(struct net_device *, u32);
339bf024
JG		 392 u32 (*get_priv_flags)(struct net_device *);
393 int (*set_priv_flags)(struct net_device *, u32);
ff03d49f
JG		 394 int (*get_sset_count)(struct net_device *, int);
395
396 /* the following hooks are obsolete */
397 int (*self_test_count)(struct net_device *);/* use get_sset_count */
398 int (*get_stats_count)(struct net_device *);/* use get_sset_count */
1da177e4 399};
c3ce7e20 400#endif /* __KERNEL__ */
1da177e4
LT		 401
402/* CMDs currently supported */
403#define ETHTOOL_GSET 0x00000001 /* Get settings. */
404#define ETHTOOL_SSET 0x00000002 /* Set settings. */
405#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
406#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
407#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
408#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
409#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
410#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
411#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
412#define ETHTOOL_GLINK 0x0000000a /* Get link status (ethtool_value) */
413#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
414#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
415#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
416#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
417#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
418#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
419#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
420#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
421#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
422#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
423#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
424#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
425#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
426 * (ethtool_value) */
427#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
428 * (ethtool_value). */
429#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
430#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
431#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
432#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
433#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
434#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
a6f9a705 435#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
e89e9cf5
AR		 436#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
437#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
37c3185a
HX		 438#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
439#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
3ae7c0b2
JG		 440#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
441#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
339bf024
JG		 442#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
443#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
1da177e4
LT		 444
445/* compatibility with older code */
446#define SPARC_ETH_GSET ETHTOOL_GSET
447#define SPARC_ETH_SSET ETHTOOL_SSET
448
449/* Indicates what features are supported by the interface. */
450#define SUPPORTED_10baseT_Half (1 << 0)
451#define SUPPORTED_10baseT_Full (1 << 1)
452#define SUPPORTED_100baseT_Half (1 << 2)
453#define SUPPORTED_100baseT_Full (1 << 3)
454#define SUPPORTED_1000baseT_Half (1 << 4)
455#define SUPPORTED_1000baseT_Full (1 << 5)
456#define SUPPORTED_Autoneg (1 << 6)
457#define SUPPORTED_TP (1 << 7)
458#define SUPPORTED_AUI (1 << 8)
459#define SUPPORTED_MII (1 << 9)
460#define SUPPORTED_FIBRE (1 << 10)
461#define SUPPORTED_BNC (1 << 11)
462#define SUPPORTED_10000baseT_Full (1 << 12)
00db8189
AF		 463#define SUPPORTED_Pause (1 << 13)
464#define SUPPORTED_Asym_Pause (1 << 14)
427c2196 465#define SUPPORTED_2500baseX_Full (1 << 15)
1da177e4
LT		 466
467/* Indicates what features are advertised by the interface. */
468#define ADVERTISED_10baseT_Half (1 << 0)
469#define ADVERTISED_10baseT_Full (1 << 1)
470#define ADVERTISED_100baseT_Half (1 << 2)
471#define ADVERTISED_100baseT_Full (1 << 3)
472#define ADVERTISED_1000baseT_Half (1 << 4)
473#define ADVERTISED_1000baseT_Full (1 << 5)
474#define ADVERTISED_Autoneg (1 << 6)
475#define ADVERTISED_TP (1 << 7)
476#define ADVERTISED_AUI (1 << 8)
477#define ADVERTISED_MII (1 << 9)
478#define ADVERTISED_FIBRE (1 << 10)
479#define ADVERTISED_BNC (1 << 11)
480#define ADVERTISED_10000baseT_Full (1 << 12)
00db8189
AF		 481#define ADVERTISED_Pause (1 << 13)
482#define ADVERTISED_Asym_Pause (1 << 14)
427c2196 483#define ADVERTISED_2500baseX_Full (1 << 15)
1da177e4
LT		 484
485/* The following are all involved in forcing a particular link
486 * mode for the device for setting things. When getting the
487 * devices settings, these indicate the current mode and whether
488 * it was foced up into this mode or autonegotiated.
489 */
490
5b0c76ad 491/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
1da177e4
LT		 492#define SPEED_10 10
493#define SPEED_100 100
494#define SPEED_1000 1000
5b0c76ad 495#define SPEED_2500 2500
1da177e4
LT		 496#define SPEED_10000 10000
497
498/* Duplex, half or full. */
499#define DUPLEX_HALF 0x00
500#define DUPLEX_FULL 0x01
501
502/* Which connector port. */
503#define PORT_TP 0x00
504#define PORT_AUI 0x01
505#define PORT_MII 0x02
506#define PORT_FIBRE 0x03
507#define PORT_BNC 0x04
508
509/* Which transceiver to use. */
510#define XCVR_INTERNAL 0x00
511#define XCVR_EXTERNAL 0x01
512#define XCVR_DUMMY1 0x02
513#define XCVR_DUMMY2 0x03
514#define XCVR_DUMMY3 0x04
515
516/* Enable or disable autonegotiation. If this is set to enable,
517 * the forced link modes above are completely ignored.
518 */
519#define AUTONEG_DISABLE 0x00
520#define AUTONEG_ENABLE 0x01
521
522/* Wake-On-Lan options. */
523#define WAKE_PHY (1 << 0)
524#define WAKE_UCAST (1 << 1)
525#define WAKE_MCAST (1 << 2)
526#define WAKE_BCAST (1 << 3)
527#define WAKE_ARP (1 << 4)
528#define WAKE_MAGIC (1 << 5)
529#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
530
531#endif /* _LINUX_ETHTOOL_H */
Linux kernel - Deliverables
This page took 0.484592 seconds and 5 git commands to generate.