projects / deliverable / linux.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] lockdep: annotate 3c59x.c disable_irq()
[deliverable/linux.git] / include / linux / ide.h
CommitLineData
1da177e4
LT		 1#ifndef _IDE_H
2#define _IDE_H
3/*
4 * linux/include/linux/ide.h
5 *
6 * Copyright (C) 1994-2002 Linus Torvalds & authors
7 */
8
1da177e4
LT		 9#include <linux/init.h>
10#include <linux/ioport.h>
11#include <linux/hdreg.h>
12#include <linux/hdsmart.h>
13#include <linux/blkdev.h>
14#include <linux/proc_fs.h>
15#include <linux/interrupt.h>
16#include <linux/bitops.h>
17#include <linux/bio.h>
18#include <linux/device.h>
19#include <linux/pci.h>
f36d4024 20#include <linux/completion.h>
1da177e4
LT		 21#include <asm/byteorder.h>
22#include <asm/system.h>
23#include <asm/io.h>
24#include <asm/semaphore.h>
25
1da177e4
LT		 26/******************************************************************************
27 * IDE driver configuration options (play with these as desired):
28 *
29 * REALLY_SLOW_IO can be defined in ide.c and ide-cd.c, if necessary
30 */
31#define INITIAL_MULT_COUNT 0 /* off=0; on=2,4,8,16,32, etc.. */
32
33#ifndef SUPPORT_SLOW_DATA_PORTS /* 1 to support slow data ports */
34#define SUPPORT_SLOW_DATA_PORTS 1 /* 0 to reduce kernel size */
35#endif
36#ifndef SUPPORT_VLB_SYNC /* 1 to support weird 32-bit chips */
37#define SUPPORT_VLB_SYNC 1 /* 0 to reduce kernel size */
38#endif
39#ifndef OK_TO_RESET_CONTROLLER /* 1 needed for good error recovery */
40#define OK_TO_RESET_CONTROLLER 1 /* 0 for use with AH2372A/B interface */
41#endif
42
43#ifndef DISABLE_IRQ_NOSYNC
44#define DISABLE_IRQ_NOSYNC 0
45#endif
46
47/*
48 * Used to indicate "no IRQ", should be a value that cannot be an IRQ
49 * number.
50 */
51
52#define IDE_NO_IRQ (-1)
53
54/*
55 * "No user-serviceable parts" beyond this point :)
56 *****************************************************************************/
57
58typedef unsigned char byte; /* used everywhere */
59
60/*
61 * Probably not wise to fiddle with these
62 */
63#define ERROR_MAX 8 /* Max read/write errors per sector */
64#define ERROR_RESET 3 /* Reset controller every 4th retry */
65#define ERROR_RECAL 1 /* Recalibrate every 2nd retry */
66
67/*
68 * Tune flags
69 */
70#define IDE_TUNE_NOAUTO 2
71#define IDE_TUNE_AUTO 1
72#define IDE_TUNE_DEFAULT 0
73
74/*
75 * state flags
76 */
77
78#define DMA_PIO_RETRY 1 /* retrying in PIO */
79
80#define HWIF(drive) ((ide_hwif_t *)((drive)->hwif))
81#define HWGROUP(drive) ((ide_hwgroup_t *)(HWIF(drive)->hwgroup))
82
83/*
84 * Definitions for accessing IDE controller registers
85 */
86#define IDE_NR_PORTS (10)
87
88#define IDE_DATA_OFFSET (0)
89#define IDE_ERROR_OFFSET (1)
90#define IDE_NSECTOR_OFFSET (2)
91#define IDE_SECTOR_OFFSET (3)
92#define IDE_LCYL_OFFSET (4)
93#define IDE_HCYL_OFFSET (5)
94#define IDE_SELECT_OFFSET (6)
95#define IDE_STATUS_OFFSET (7)
96#define IDE_CONTROL_OFFSET (8)
97#define IDE_IRQ_OFFSET (9)
98
99#define IDE_FEATURE_OFFSET IDE_ERROR_OFFSET
100#define IDE_COMMAND_OFFSET IDE_STATUS_OFFSET
101
102#define IDE_CONTROL_OFFSET_HOB (7)
103
104#define IDE_DATA_REG (HWIF(drive)->io_ports[IDE_DATA_OFFSET])
105#define IDE_ERROR_REG (HWIF(drive)->io_ports[IDE_ERROR_OFFSET])
106#define IDE_NSECTOR_REG (HWIF(drive)->io_ports[IDE_NSECTOR_OFFSET])
107#define IDE_SECTOR_REG (HWIF(drive)->io_ports[IDE_SECTOR_OFFSET])
108#define IDE_LCYL_REG (HWIF(drive)->io_ports[IDE_LCYL_OFFSET])
109#define IDE_HCYL_REG (HWIF(drive)->io_ports[IDE_HCYL_OFFSET])
110#define IDE_SELECT_REG (HWIF(drive)->io_ports[IDE_SELECT_OFFSET])
111#define IDE_STATUS_REG (HWIF(drive)->io_ports[IDE_STATUS_OFFSET])
112#define IDE_CONTROL_REG (HWIF(drive)->io_ports[IDE_CONTROL_OFFSET])
113#define IDE_IRQ_REG (HWIF(drive)->io_ports[IDE_IRQ_OFFSET])
114
115#define IDE_FEATURE_REG IDE_ERROR_REG
116#define IDE_COMMAND_REG IDE_STATUS_REG
117#define IDE_ALTSTATUS_REG IDE_CONTROL_REG
118#define IDE_IREASON_REG IDE_NSECTOR_REG
119#define IDE_BCOUNTL_REG IDE_LCYL_REG
120#define IDE_BCOUNTH_REG IDE_HCYL_REG
121
122#define OK_STAT(stat,good,bad) (((stat)&((good)|(bad)))==(good))
123#define BAD_R_STAT (BUSY_STAT | ERR_STAT)
124#define BAD_W_STAT (BAD_R_STAT | WRERR_STAT)
125#define BAD_STAT (BAD_R_STAT | DRQ_STAT)
126#define DRIVE_READY (READY_STAT | SEEK_STAT)
127#define DATA_READY (DRQ_STAT)
128
129#define BAD_CRC (ABRT_ERR | ICRC_ERR)
130
131#define SATA_NR_PORTS (3) /* 16 possible ?? */
132
133#define SATA_STATUS_OFFSET (0)
134#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET])
135#define SATA_ERROR_OFFSET (1)
136#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET])
137#define SATA_CONTROL_OFFSET (2)
138#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET])
139
140#define SATA_MISC_OFFSET (0)
141#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET])
142#define SATA_PHY_OFFSET (1)
143#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET])
144#define SATA_IEN_OFFSET (2)
145#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET])
146
147/*
148 * Our Physical Region Descriptor (PRD) table should be large enough
149 * to handle the biggest I/O request we are likely to see. Since requests
150 * can have no more than 256 sectors, and since the typical blocksize is
151 * two or more sectors, we could get by with a limit of 128 entries here for
152 * the usual worst case. Most requests seem to include some contiguous blocks,
153 * further reducing the number of table entries required.
154 *
155 * The driver reverts to PIO mode for individual requests that exceed
156 * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
157 * 100% of all crazy scenarios here is not necessary.
158 *
159 * As it turns out though, we must allocate a full 4KB page for this,
160 * so the two PRD tables (ide0 & ide1) will each get half of that,
161 * allowing each to have about 256 entries (8 bytes each) from this.
162 */
163#define PRD_BYTES 8
164#define PRD_ENTRIES 256
165
166/*
167 * Some more useful definitions
168 */
169#define PARTN_BITS 6 /* number of minor dev bits for partitions */
170#define MAX_DRIVES 2 /* per interface; 2 assumed by lots of code */
171#define SECTOR_SIZE 512
172#define SECTOR_WORDS (SECTOR_SIZE / 4) /* number of 32bit words per sector */
173#define IDE_LARGE_SEEK(b1,b2,t) (((b1) > (b2) + (t)) || ((b2) > (b1) + (t)))
174
175/*
176 * Timeouts for various operations:
177 */
178#define WAIT_DRQ (HZ/10) /* 100msec - spec allows up to 20ms */
179#define WAIT_READY (5*HZ) /* 5sec - some laptops are very slow */
180#define WAIT_PIDENTIFY (10*HZ) /* 10sec - should be less than 3ms (?), if all ATAPI CD is closed at boot */
181#define WAIT_WORSTCASE (30*HZ) /* 30sec - worst case when spinning up */
182#define WAIT_CMD (10*HZ) /* 10sec - maximum wait for an IRQ to happen */
183#define WAIT_MIN_SLEEP (2*HZ/100) /* 20msec - minimum sleep time */
184
1da177e4
LT		 185/*
186 * Check for an interrupt and acknowledge the interrupt status
187 */
188struct hwif_s;
189typedef int (ide_ack_intr_t)(struct hwif_s *);
190
191#ifndef NO_DMA
192#define NO_DMA 255
193#endif
194
195/*
196 * hwif_chipset_t is used to keep track of the specific hardware
197 * chipset used by each IDE interface, if known.
198 */
199typedef enum { ide_unknown, ide_generic, ide_pci,
200 ide_cmd640, ide_dtc2278, ide_ali14xx,
201 ide_qd65xx, ide_umc8672, ide_ht6560b,
202 ide_rz1000, ide_trm290,
203 ide_cmd646, ide_cy82c693, ide_4drives,
204 ide_pmac, ide_etrax100, ide_acorn,
26a940e2 205 ide_au1xxx, ide_forced
1da177e4
LT		 206} hwif_chipset_t;
207
208/*
209 * Structure to hold all information about the location of this port
210 */
211typedef struct hw_regs_s {
212 unsigned long io_ports[IDE_NR_PORTS]; /* task file registers */
213 int irq; /* our irq number */
214 int dma; /* our dma entry */
215 ide_ack_intr_t *ack_intr; /* acknowledge interrupt */
216 hwif_chipset_t chipset;
4349d5cd 217 struct device *dev;
1da177e4
LT		 218} hw_regs_t;
219
220/*
221 * Register new hardware with ide
222 */
223int ide_register_hw(hw_regs_t *hw, struct hwif_s **hwifp);
224int ide_register_hw_with_fixup(hw_regs_t *, struct hwif_s **, void (*)(struct hwif_s *));
225
226/*
227 * Set up hw_regs_t structure before calling ide_register_hw (optional)
228 */
229void ide_setup_ports( hw_regs_t *hw,
230 unsigned long base,
231 int *offsets,
232 unsigned long ctrl,
233 unsigned long intr,
234 ide_ack_intr_t *ack_intr,
235#if 0
236 ide_io_ops_t *iops,
237#endif
238 int irq);
239
240static inline void ide_std_init_ports(hw_regs_t *hw,
241 unsigned long io_addr,
242 unsigned long ctl_addr)
243{
244 unsigned int i;
245
246 for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
247 hw->io_ports[i] = io_addr++;
248
249 hw->io_ports[IDE_CONTROL_OFFSET] = ctl_addr;
250}
251
252#include <asm/ide.h>
253
83ae20c8
BH		 254#ifndef MAX_HWIFS
255#define MAX_HWIFS CONFIG_IDE_MAX_HWIFS
256#endif
257
1da177e4
LT		 258/* needed on alpha, x86/x86_64, ia64, mips, ppc32 and sh */
259#ifndef IDE_ARCH_OBSOLETE_DEFAULTS
260# define ide_default_io_base(index) (0)
261# define ide_default_irq(base) (0)
262# define ide_init_default_irq(base) (0)
263#endif
264
265/*
266 * ide_init_hwif_ports() is OBSOLETE and will be removed in 2.7 series.
267 * New ports shouldn't define IDE_ARCH_OBSOLETE_INIT in <asm/ide.h>.
268 */
269#ifdef IDE_ARCH_OBSOLETE_INIT
270static inline void ide_init_hwif_ports(hw_regs_t *hw,
271 unsigned long io_addr,
272 unsigned long ctl_addr,
273 int *irq)
274{
275 if (!ctl_addr)
276 ide_std_init_ports(hw, io_addr, ide_default_io_ctl(io_addr));
277 else
278 ide_std_init_ports(hw, io_addr, ctl_addr);
279
280 if (irq)
281 *irq = 0;
282
283 hw->io_ports[IDE_IRQ_OFFSET] = 0;
284
285#ifdef CONFIG_PPC32
286 if (ppc_ide_md.ide_init_hwif)
287 ppc_ide_md.ide_init_hwif(hw, io_addr, ctl_addr, irq);
288#endif
289}
290#else
291static inline void ide_init_hwif_ports(hw_regs_t *hw,
292 unsigned long io_addr,
293 unsigned long ctl_addr,
294 int *irq)
295{
296 if (io_addr || ctl_addr)
297 printk(KERN_WARNING "%s: must not be called\n", __FUNCTION__);
298}
299#endif /* IDE_ARCH_OBSOLETE_INIT */
300
301/* Currently only m68k, apus and m8xx need it */
302#ifndef IDE_ARCH_ACK_INTR
303# define ide_ack_intr(hwif) (1)
304#endif
305
306/* Currently only Atari needs it */
307#ifndef IDE_ARCH_LOCK
308# define ide_release_lock() do {} while (0)
309# define ide_get_lock(hdlr, data) do {} while (0)
310#endif /* IDE_ARCH_LOCK */
311
312/*
313 * Now for the data we need to maintain per-drive: ide_drive_t
314 */
315
316#define ide_scsi 0x21
317#define ide_disk 0x20
318#define ide_optical 0x7
319#define ide_cdrom 0x5
320#define ide_tape 0x1
321#define ide_floppy 0x0
322
323/*
324 * Special Driver Flags
325 *
326 * set_geometry : respecify drive geometry
327 * recalibrate : seek to cyl 0
328 * set_multmode : set multmode count
329 * set_tune : tune interface for drive
330 * serviced : service command
331 * reserved : unused
332 */
333typedef union {
334 unsigned all : 8;
335 struct {
336#if defined(__LITTLE_ENDIAN_BITFIELD)
337 unsigned set_geometry : 1;
338 unsigned recalibrate : 1;
339 unsigned set_multmode : 1;
340 unsigned set_tune : 1;
341 unsigned serviced : 1;
342 unsigned reserved : 3;
343#elif defined(__BIG_ENDIAN_BITFIELD)
344 unsigned reserved : 3;
345 unsigned serviced : 1;
346 unsigned set_tune : 1;
347 unsigned set_multmode : 1;
348 unsigned recalibrate : 1;
349 unsigned set_geometry : 1;
350#else
351#error "Please fix <asm/byteorder.h>"
352#endif
353 } b;
354} special_t;
355
356/*
357 * ATA DATA Register Special.
358 * ATA NSECTOR Count Register().
359 * ATAPI Byte Count Register.
360 * Channel index ordering pairs.
361 */
362typedef union {
363 unsigned all :16;
364 struct {
365#if defined(__LITTLE_ENDIAN_BITFIELD)
366 unsigned low :8; /* LSB */
367 unsigned high :8; /* MSB */
368#elif defined(__BIG_ENDIAN_BITFIELD)
369 unsigned high :8; /* MSB */
370 unsigned low :8; /* LSB */
371#else
372#error "Please fix <asm/byteorder.h>"
373#endif
374 } b;
375} ata_nsector_t, ata_data_t, atapi_bcount_t, ata_index_t;
376
1da177e4
LT		 377/*
378 * ATA-IDE Select Register, aka Device-Head
379 *
380 * head : always zeros here
381 * unit : drive select number: 0/1
382 * bit5 : always 1
383 * lba : using LBA instead of CHS
384 * bit7 : always 1
385 */
386typedef union {
387 unsigned all : 8;
388 struct {
389#if defined(__LITTLE_ENDIAN_BITFIELD)
390 unsigned head : 4;
391 unsigned unit : 1;
392 unsigned bit5 : 1;
393 unsigned lba : 1;
394 unsigned bit7 : 1;
395#elif defined(__BIG_ENDIAN_BITFIELD)
396 unsigned bit7 : 1;
397 unsigned lba : 1;
398 unsigned bit5 : 1;
399 unsigned unit : 1;
400 unsigned head : 4;
401#else
402#error "Please fix <asm/byteorder.h>"
403#endif
404 } b;
405} select_t, ata_select_t;
406
407/*
408 * The ATA-IDE Status Register.
409 * The ATAPI Status Register.
410 *
411 * check : Error occurred
412 * idx : Index Error
413 * corr : Correctable error occurred
414 * drq : Data is request by the device
415 * dsc : Disk Seek Complete : ata
416 * : Media access command finished : atapi
417 * df : Device Fault : ata
418 * : Reserved : atapi
419 * drdy : Ready, Command Mode Capable : ata
420 * : Ignored for ATAPI commands : atapi
421 * bsy : Disk is Busy
422 * : The device has access to the command block
423 */
424typedef union {
425 unsigned all :8;
426 struct {
427#if defined(__LITTLE_ENDIAN_BITFIELD)
428 unsigned check :1;
429 unsigned idx :1;
430 unsigned corr :1;
431 unsigned drq :1;
432 unsigned dsc :1;
433 unsigned df :1;
434 unsigned drdy :1;
435 unsigned bsy :1;
436#elif defined(__BIG_ENDIAN_BITFIELD)
437 unsigned bsy :1;
438 unsigned drdy :1;
439 unsigned df :1;
440 unsigned dsc :1;
441 unsigned drq :1;
442 unsigned corr :1;
443 unsigned idx :1;
444 unsigned check :1;
445#else
446#error "Please fix <asm/byteorder.h>"
447#endif
448 } b;
449} ata_status_t, atapi_status_t;
450
1da177e4
LT		 451/*
452 * ATAPI Feature Register
453 *
454 * dma : Using DMA or PIO
455 * reserved321 : Reserved
456 * reserved654 : Reserved (Tag Type)
457 * reserved7 : Reserved
458 */
459typedef union {
460 unsigned all :8;
461 struct {
462#if defined(__LITTLE_ENDIAN_BITFIELD)
463 unsigned dma :1;
464 unsigned reserved321 :3;
465 unsigned reserved654 :3;
466 unsigned reserved7 :1;
467#elif defined(__BIG_ENDIAN_BITFIELD)
468 unsigned reserved7 :1;
469 unsigned reserved654 :3;
470 unsigned reserved321 :3;
471 unsigned dma :1;
472#else
473#error "Please fix <asm/byteorder.h>"
474#endif
475 } b;
476} atapi_feature_t;
477
478/*
479 * ATAPI Interrupt Reason Register.
480 *
481 * cod : Information transferred is command (1) or data (0)
482 * io : The device requests us to read (1) or write (0)
483 * reserved : Reserved
484 */
485typedef union {
486 unsigned all :8;
487 struct {
488#if defined(__LITTLE_ENDIAN_BITFIELD)
489 unsigned cod :1;
490 unsigned io :1;
491 unsigned reserved :6;
492#elif defined(__BIG_ENDIAN_BITFIELD)
493 unsigned reserved :6;
494 unsigned io :1;
495 unsigned cod :1;
496#else
497#error "Please fix <asm/byteorder.h>"
498#endif
499 } b;
500} atapi_ireason_t;
501
502/*
503 * The ATAPI error register.
504 *
505 * ili : Illegal Length Indication
506 * eom : End Of Media Detected
507 * abrt : Aborted command - As defined by ATA
508 * mcr : Media Change Requested - As defined by ATA
509 * sense_key : Sense key of the last failed packet command
510 */
511typedef union {
512 unsigned all :8;
513 struct {
514#if defined(__LITTLE_ENDIAN_BITFIELD)
515 unsigned ili :1;
516 unsigned eom :1;
517 unsigned abrt :1;
518 unsigned mcr :1;
519 unsigned sense_key :4;
520#elif defined(__BIG_ENDIAN_BITFIELD)
521 unsigned sense_key :4;
522 unsigned mcr :1;
523 unsigned abrt :1;
524 unsigned eom :1;
525 unsigned ili :1;
526#else
527#error "Please fix <asm/byteorder.h>"
528#endif
529 } b;
530} atapi_error_t;
531
1da177e4
LT		 532/*
533 * Status returned from various ide_ functions
534 */
535typedef enum {
536 ide_stopped, /* no drive operation was started */
537 ide_started, /* a drive operation was started, handler was set */
538} ide_startstop_t;
539
540struct ide_driver_s;
541struct ide_settings_s;
542
543typedef struct ide_drive_s {
544 char name[4]; /* drive name, such as "hda" */
545 char driver_req[10]; /* requests specific driver */
546
547 request_queue_t *queue; /* request queue */
548
549 struct request *rq; /* current request */
550 struct ide_drive_s *next; /* circular list of hwgroup drives */
1da177e4
LT		 551 void *driver_data; /* extra driver data */
552 struct hd_driveid *id; /* drive model identification info */
553 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
554 struct ide_settings_s *settings;/* /proc/ide/ drive settings */
1da177e4
LT		 555
556 struct hwif_s *hwif; /* actually (ide_hwif_t *) */
557
558 unsigned long sleep; /* sleep until this time */
559 unsigned long service_start; /* time we started last request */
560 unsigned long service_time; /* service time of last request */
561 unsigned long timeout; /* max time to wait for irq */
562
563 special_t special; /* special action flags */
564 select_t select; /* basic drive/head select reg value */
565
566 u8 keep_settings; /* restore settings after drive reset */
567 u8 autodma; /* device can safely use dma on host */
568 u8 using_dma; /* disk is using dma for read/write */
569 u8 retry_pio; /* retrying dma capable host in pio */
570 u8 state; /* retry state */
571 u8 waiting_for_dma; /* dma currently in progress */
572 u8 unmask; /* okay to unmask other irqs */
573 u8 bswap; /* byte swap data */
574 u8 dsc_overlap; /* DSC overlap */
575 u8 nice1; /* give potential excess bandwidth */
576
577 unsigned present : 1; /* drive is physically present */
578 unsigned dead : 1; /* device ejected hint */
579 unsigned id_read : 1; /* 1=id read from disk 0 = synthetic */
580 unsigned noprobe : 1; /* from: hdx=noprobe */
581 unsigned removable : 1; /* 1 if need to do check_media_change */
582 unsigned attach : 1; /* needed for removable devices */
1da177e4
LT		 583 unsigned forced_geom : 1; /* 1 if hdx=c,h,s was given at boot */
584 unsigned no_unmask : 1; /* disallow setting unmask bit */
585 unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */
586 unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */
587 unsigned nice0 : 1; /* give obvious excess bandwidth */
588 unsigned nice2 : 1; /* give a share in our own bandwidth */
589 unsigned doorlocking : 1; /* for removable only: door lock/unlock works */
590 unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */
591 unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */
592 unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */
593 unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */
594 unsigned addressing; /* : 3;
595 * 0=28-bit
596 * 1=48-bit
597 * 2=48-bit doing 28-bit
598 * 3=64-bit
599 */
600 unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */
601 unsigned sleeping : 1; /* 1=sleeping & sleep field valid */
602 unsigned post_reset : 1;
603
604 u8 quirk_list; /* considered quirky, set for a specific host */
605 u8 init_speed; /* transfer rate set at boot */
606 u8 pio_speed; /* unused by core, used by some drivers for fallback from DMA */
607 u8 current_speed; /* current transfer rate set */
608 u8 dn; /* now wide spread use */
609 u8 wcache; /* status of write cache */
610 u8 acoustic; /* acoustic management */
611 u8 media; /* disk, cdrom, tape, floppy, ... */
612 u8 ctl; /* "normal" value for IDE_CONTROL_REG */
613 u8 ready_stat; /* min status value for drive ready */
614 u8 mult_count; /* current multiple sector setting */
615 u8 mult_req; /* requested multiple sector setting */
616 u8 tune_req; /* requested drive tuning setting */
617 u8 io_32bit; /* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
618 u8 bad_wstat; /* used for ignoring WRERR_STAT */
619 u8 nowerr; /* used for ignoring WRERR_STAT */
620 u8 sect0; /* offset of first sector for DM6:DDO */
621 u8 head; /* "real" number of heads */
622 u8 sect; /* "real" sectors per track */
623 u8 bios_head; /* BIOS/fdisk/LILO number of heads */
624 u8 bios_sect; /* BIOS/fdisk/LILO sectors per track */
625
626 unsigned int bios_cyl; /* BIOS/fdisk/LILO number of cyls */
627 unsigned int cyl; /* "real" number of cyls */
628 unsigned int drive_data; /* use by tuneproc/selectproc */
629 unsigned int usage; /* current "open()" count for drive */
630 unsigned int failures; /* current failure count */
631 unsigned int max_failures; /* maximum allowed failure count */
dbe217af 632 u64 probed_capacity;/* initial reported media capacity (ide-cd only currently) */
1da177e4
LT		 633
634 u64 capacity64; /* total number of sectors */
635
636 int lun; /* logical unit */
637 int crc_count; /* crc counter to reduce drive speed */
638 struct list_head list;
639 struct device gendev;
f36d4024 640 struct completion gendev_rel_comp; /* to deal with device release() */
1da177e4
LT		 641} ide_drive_t;
642
8604affd
BZ		 643#define to_ide_device(dev)container_of(dev, ide_drive_t, gendev)
644
1da177e4
LT		 645#define IDE_CHIPSET_PCI_MASK \
646 ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx))
647#define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1)
648
649struct ide_pci_device_s;
650
651typedef struct hwif_s {
652 struct hwif_s *next; /* for linked-list in ide_hwgroup_t */
653 struct hwif_s *mate; /* other hwif from same PCI chip */
654 struct hwgroup_s *hwgroup; /* actually (ide_hwgroup_t *) */
655 struct proc_dir_entry *proc; /* /proc/ide/ directory entry */
656
657 char name[6]; /* name of interface, eg. "ide0" */
658
659 /* task file registers for pata and sata */
660 unsigned long io_ports[IDE_NR_PORTS];
661 unsigned long sata_scr[SATA_NR_PORTS];
662 unsigned long sata_misc[SATA_NR_PORTS];
663
664 hw_regs_t hw; /* Hardware info */
665 ide_drive_t drives[MAX_DRIVES]; /* drive info */
666
667 u8 major; /* our major number */
668 u8 index; /* 0 for ide0; 1 for ide1; ... */
669 u8 channel; /* for dual-port chips: 0=primary, 1=secondary */
670 u8 straight8; /* Alan's straight 8 check */
671 u8 bus_state; /* power state of the IDE bus */
672
673 u8 atapi_dma; /* host supports atapi_dma */
674 u8 ultra_mask;
675 u8 mwdma_mask;
676 u8 swdma_mask;
677
678 hwif_chipset_t chipset; /* sub-module for tuning.. */
679
680 struct pci_dev *pci_dev; /* for pci chipsets */
681 struct ide_pci_device_s *cds; /* chipset device struct */
682
683 void (*rw_disk)(ide_drive_t *, struct request *);
684
685#if 0
686 ide_hwif_ops_t *hwifops;
687#else
688 /* routine to tune PIO mode for drives */
689 void (*tuneproc)(ide_drive_t *, u8);
690 /* routine to retune DMA modes for drives */
691 int (*speedproc)(ide_drive_t *, u8);
692 /* tweaks hardware to select drive */
693 void (*selectproc)(ide_drive_t *);
694 /* chipset polling based on hba specifics */
695 int (*reset_poll)(ide_drive_t *);
696 /* chipset specific changes to default for device-hba resets */
697 void (*pre_reset)(ide_drive_t *);
698 /* routine to reset controller after a disk reset */
699 void (*resetproc)(ide_drive_t *);
700 /* special interrupt handling for shared pci interrupts */
701 void (*intrproc)(ide_drive_t *);
702 /* special host masking for drive selection */
703 void (*maskproc)(ide_drive_t *, int);
704 /* check host's drive quirk list */
705 int (*quirkproc)(ide_drive_t *);
706 /* driver soft-power interface */
707 int (*busproc)(ide_drive_t *, int);
708// /* host rate limiter */
709// u8 (*ratemask)(ide_drive_t *);
710// /* device rate limiter */
711// u8 (*ratefilter)(ide_drive_t *, u8);
712#endif
713
714 void (*ata_input_data)(ide_drive_t *, void *, u32);
715 void (*ata_output_data)(ide_drive_t *, void *, u32);
716
717 void (*atapi_input_bytes)(ide_drive_t *, void *, u32);
718 void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
719
720 int (*dma_setup)(ide_drive_t *);
721 void (*dma_exec_cmd)(ide_drive_t *, u8);
722 void (*dma_start)(ide_drive_t *);
723 int (*ide_dma_end)(ide_drive_t *drive);
724 int (*ide_dma_check)(ide_drive_t *drive);
725 int (*ide_dma_on)(ide_drive_t *drive);
726 int (*ide_dma_off_quietly)(ide_drive_t *drive);
727 int (*ide_dma_test_irq)(ide_drive_t *drive);
728 int (*ide_dma_host_on)(ide_drive_t *drive);
729 int (*ide_dma_host_off)(ide_drive_t *drive);
730 int (*ide_dma_lostirq)(ide_drive_t *drive);
731 int (*ide_dma_timeout)(ide_drive_t *drive);
732
733 void (*OUTB)(u8 addr, unsigned long port);
734 void (*OUTBSYNC)(ide_drive_t *drive, u8 addr, unsigned long port);
735 void (*OUTW)(u16 addr, unsigned long port);
736 void (*OUTL)(u32 addr, unsigned long port);
737 void (*OUTSW)(unsigned long port, void *addr, u32 count);
738 void (*OUTSL)(unsigned long port, void *addr, u32 count);
739
740 u8 (*INB)(unsigned long port);
741 u16 (*INW)(unsigned long port);
742 u32 (*INL)(unsigned long port);
743 void (*INSW)(unsigned long port, void *addr, u32 count);
744 void (*INSL)(unsigned long port, void *addr, u32 count);
745
746 /* dma physical region descriptor table (cpu view) */
747 unsigned int *dmatable_cpu;
748 /* dma physical region descriptor table (dma view) */
749 dma_addr_t dmatable_dma;
750 /* Scatter-gather list used to build the above */
751 struct scatterlist *sg_table;
752 int sg_max_nents; /* Maximum number of entries in it */
753 int sg_nents; /* Current number of entries in it */
754 int sg_dma_direction; /* dma transfer direction */
755
756 /* data phase of the active command (currently only valid for PIO/DMA) */
757 int data_phase;
758
759 unsigned int nsect;
760 unsigned int nleft;
761 unsigned int cursg;
762 unsigned int cursg_ofs;
763
764 int mmio; /* hosts iomio (0) or custom (2) select */
765 int rqsize; /* max sectors per request */
766 int irq; /* our irq number */
767
768 unsigned long dma_master; /* reference base addr dmabase */
769 unsigned long dma_base; /* base addr for dma ports */
770 unsigned long dma_command; /* dma command register */
771 unsigned long dma_vendor1; /* dma vendor 1 register */
772 unsigned long dma_status; /* dma status register */
773 unsigned long dma_vendor3; /* dma vendor 3 register */
774 unsigned long dma_prdtable; /* actual prd table address */
775 unsigned long dma_base2; /* extended base addr for dma ports */
776
777 unsigned dma_extra; /* extra addr for dma ports */
778 unsigned long config_data; /* for use by chipset-specific code */
779 unsigned long select_data; /* for use by chipset-specific code */
780
781 unsigned noprobe : 1; /* don't probe for this interface */
782 unsigned present : 1; /* this interface exists */
783 unsigned hold : 1; /* this interface is always present */
784 unsigned serialized : 1; /* serialized all channel operation */
785 unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */
786 unsigned reset : 1; /* reset after probe */
787 unsigned autodma : 1; /* auto-attempt using DMA at boot */
788 unsigned udma_four : 1; /* 1=ATA-66 capable, 0=default */
789 unsigned no_lba48 : 1; /* 1 = cannot do LBA48 */
790 unsigned no_lba48_dma : 1; /* 1 = cannot do LBA48 DMA */
791 unsigned no_dsc : 1; /* 0 default, 1 dsc_overlap disabled */
792 unsigned auto_poll : 1; /* supports nop auto-poll */
793 unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */
208a08f7 794 unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */
da574af7 795 unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */
1da177e4
LT		 796
797 struct device gendev;
f36d4024 798 struct completion gendev_rel_comp; /* To deal with device release() */
1da177e4
LT		 799
800 void *hwif_data; /* extra hwif data */
801
802 unsigned dma;
803
804 void (*led_act)(void *data, int rw);
22fc6ecc 805} ____cacheline_internodealigned_in_smp ide_hwif_t;
1da177e4
LT		 806
807/*
808 * internal ide interrupt handler type
809 */
810typedef ide_startstop_t (ide_pre_handler_t)(ide_drive_t *, struct request *);
811typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
812typedef int (ide_expiry_t)(ide_drive_t *);
813
814typedef struct hwgroup_s {
815 /* irq handler, if active */
816 ide_startstop_t (*handler)(ide_drive_t *);
817 /* irq handler, suspended if active */
818 ide_startstop_t (*handler_save)(ide_drive_t *);
819 /* BOOL: protects all fields below */
820 volatile int busy;
821 /* BOOL: wake us up on timer expiry */
822 unsigned int sleeping : 1;
823 /* BOOL: polling active & poll_timeout field valid */
824 unsigned int polling : 1;
825 /* current drive */
826 ide_drive_t *drive;
827 /* ptr to current hwif in linked-list */
828 ide_hwif_t *hwif;
829
830 /* for pci chipsets */
831 struct pci_dev *pci_dev;
832 /* chipset device struct */
833 struct ide_pci_device_s *cds;
834
835 /* current request */
836 struct request *rq;
837 /* failsafe timer */
838 struct timer_list timer;
839 /* local copy of current write rq */
840 struct request wrq;
841 /* timeout value during long polls */
842 unsigned long poll_timeout;
843 /* queried upon timeouts */
844 int (*expiry)(ide_drive_t *);
845 /* ide_system_bus_speed */
846 int pio_clock;
847
848 unsigned char cmd_buf[4];
849} ide_hwgroup_t;
850
851/* structure attached to the request for IDE_TASK_CMDS */
852
853/*
854 * configurable drive settings
855 */
856
857#define TYPE_INT 0
858#define TYPE_INTA 1
859#define TYPE_BYTE 2
860#define TYPE_SHORT 3
861
862#define SETTING_READ (1 << 0)
863#define SETTING_WRITE (1 << 1)
864#define SETTING_RW (SETTING_READ | SETTING_WRITE)
865
866typedef int (ide_procset_t)(ide_drive_t *, int);
867typedef struct ide_settings_s {
868 char *name;
869 int rw;
870 int read_ioctl;
871 int write_ioctl;
872 int data_type;
873 int min;
874 int max;
875 int mul_factor;
876 int div_factor;
877 void *data;
878 ide_procset_t *set;
879 int auto_remove;
880 struct ide_settings_s *next;
881} ide_settings_t;
882
883extern struct semaphore ide_setting_sem;
884extern int ide_add_setting(ide_drive_t *drive, const char *name, int rw, int read_ioctl, int write_ioctl, int data_type, int min, int max, int mul_factor, int div_factor, void *data, ide_procset_t *set);
885extern ide_settings_t *ide_find_setting_by_name(ide_drive_t *drive, char *name);
886extern int ide_read_setting(ide_drive_t *t, ide_settings_t *setting);
887extern int ide_write_setting(ide_drive_t *drive, ide_settings_t *setting, int val);
888extern void ide_add_generic_settings(ide_drive_t *drive);
889
890/*
891 * /proc/ide interface
892 */
893typedef struct {
894 const char *name;
895 mode_t mode;
896 read_proc_t *read_proc;
897 write_proc_t *write_proc;
898} ide_proc_entry_t;
899
900#ifdef CONFIG_PROC_FS
901extern struct proc_dir_entry *proc_ide_root;
902
903extern void proc_ide_create(void);
904extern void proc_ide_destroy(void);
905extern void create_proc_ide_interfaces(void);
906void destroy_proc_ide_interface(ide_hwif_t *);
907extern void ide_add_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *, void *);
908extern void ide_remove_proc_entries(struct proc_dir_entry *, ide_proc_entry_t *);
909read_proc_t proc_ide_read_capacity;
910read_proc_t proc_ide_read_geometry;
911
912#ifdef CONFIG_BLK_DEV_IDEPCI
913void ide_pci_create_host_proc(const char *, get_info_t *);
914#endif
915
916/*
917 * Standard exit stuff:
918 */
919#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) \
920{ \
921 len -= off; \
922 if (len < count) { \
923 *eof = 1; \
924 if (len <= 0) \
925 return 0; \
926 } else \
927 len = count; \
928 *start = page + off; \
929 return len; \
930}
931#else
932static inline void create_proc_ide_interfaces(void) { ; }
933static inline void destroy_proc_ide_interface(ide_hwif_t *hwif) { ; }
934#define PROC_IDE_READ_RETURN(page,start,off,count,eof,len) return 0;
935#endif
936
937/*
938 * Power Management step value (rq->pm->pm_step).
939 *
940 * The step value starts at 0 (ide_pm_state_start_suspend) for a
941 * suspend operation or 1000 (ide_pm_state_start_resume) for a
942 * resume operation.
943 *
944 * For each step, the core calls the subdriver start_power_step() first.
945 * This can return:
946 * - ide_stopped : In this case, the core calls us back again unless
947 * step have been set to ide_power_state_completed.
948 * - ide_started : In this case, the channel is left busy until an
949 * async event (interrupt) occurs.
950 * Typically, start_power_step() will issue a taskfile request with
951 * do_rw_taskfile().
952 *
953 * Upon reception of the interrupt, the core will call complete_power_step()
954 * with the error code if any. This routine should update the step value
955 * and return. It should not start a new request. The core will call
956 * start_power_step for the new step value, unless step have been set to
957 * ide_power_state_completed.
958 *
959 * Subdrivers are expected to define their own additional power
960 * steps from 1..999 for suspend and from 1001..1999 for resume,
961 * other values are reserved for future use.
962 */
963
964enum {
965 ide_pm_state_completed = -1,
966 ide_pm_state_start_suspend = 0,
967 ide_pm_state_start_resume = 1000,
968};
969
970/*
971 * Subdrivers support.
4ef3b8f4
LR		 972 *
973 * The gendriver.owner field should be set to the module owner of this driver.
974 * The gendriver.name field should be set to the name of this driver
1da177e4
LT		 975 */
976typedef struct ide_driver_s {
1da177e4
LT		 977 const char *version;
978 u8 media;
1da177e4 979 unsigned supports_dsc_overlap : 1;
1da177e4
LT		 980 ide_startstop_t (*do_request)(ide_drive_t *, struct request *, sector_t);
981 int (*end_request)(ide_drive_t *, int, int);
982 ide_startstop_t (*error)(ide_drive_t *, struct request *rq, u8, u8);
983 ide_startstop_t (*abort)(ide_drive_t *, struct request *rq);
1da177e4 984 ide_proc_entry_t *proc;
1da177e4 985 struct device_driver gen_driver;
4031bbe4
RK		 986 int (*probe)(ide_drive_t *);
987 void (*remove)(ide_drive_t *);
988 void (*shutdown)(ide_drive_t *);
1da177e4
LT		 989} ide_driver_t;
990
4031bbe4
RK		 991#define to_ide_driver(drv) container_of(drv, ide_driver_t, gen_driver)
992
1da177e4
LT		 993int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsigned, unsigned long);
994
995/*
996 * ide_hwifs[] is the master data structure used to keep track
997 * of just about everything in ide.c. Whenever possible, routines
998 * should be using pointers to a drive (ide_drive_t *) or
999 * pointers to a hwif (ide_hwif_t *), rather than indexing this
1000 * structure directly (the allocation/layout may change!).
1001 *
1002 */
1003#ifndef _IDE_C
1004extern ide_hwif_t ide_hwifs[]; /* master data repository */
1005#endif
1006extern int noautodma;
1007
1008extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs);
dbe217af
AC		 1009int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
1010 int uptodate, int nr_sectors);
1da177e4
LT		 1011
1012/*
1013 * This is used on exit from the driver to designate the next irq handler
1014 * and also to start the safety timer.
1015 */
1016extern void ide_set_handler (ide_drive_t *drive, ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry);
1017
1018/*
1019 * This is used on exit from the driver to designate the next irq handler
1020 * and start the safety time safely and atomically from the IRQ handler
1021 * with respect to the command issue (which it also does)
1022 */
1023extern void ide_execute_command(ide_drive_t *, task_ioreg_t cmd, ide_handler_t *, unsigned int, ide_expiry_t *);
1024
1025ide_startstop_t __ide_error(ide_drive_t *, struct request *, u8, u8);
1026
1027/*
1028 * ide_error() takes action based on the error returned by the controller.
1029 * The caller should return immediately after invoking this.
1030 *
1031 * (drive, msg, status)
1032 */
1033ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, byte stat);
1034
1035ide_startstop_t __ide_abort(ide_drive_t *, struct request *);
1036
1037/*
1038 * Abort a running command on the controller triggering the abort
1039 * from a host side, non error situation
1040 * (drive, msg)
1041 */
1042extern ide_startstop_t ide_abort(ide_drive_t *, const char *);
1043
1044extern void ide_fix_driveid(struct hd_driveid *);
1045/*
1046 * ide_fixstring() cleans up and (optionally) byte-swaps a text string,
1047 * removing leading/trailing blanks and compressing internal blanks.
1048 * It is primarily used to tidy up the model name/number fields as
1049 * returned by the WIN_[P]IDENTIFY commands.
1050 *
1051 * (s, bytecount, byteswap)
1052 */
1053extern void ide_fixstring(u8 *, const int, const int);
1054
1055/*
1056 * This routine busy-waits for the drive status to be not "busy".
1057 * It then checks the status for all of the "good" bits and none
1058 * of the "bad" bits, and if all is okay it returns 0. All other
1059 * cases return 1 after doing "*startstop = ide_error()", and the
1060 * caller should return the updated value of "startstop" in this case.
1061 * "startstop" is unchanged when the function returns 0;
1062 * (startstop, drive, good, bad, timeout)
1063 */
1064extern int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
1065
1066/*
1067 * Start a reset operation for an IDE interface.
1068 * The caller should return immediately after invoking this.
1069 */
1070extern ide_startstop_t ide_do_reset (ide_drive_t *);
1071
1072/*
1073 * This function is intended to be used prior to invoking ide_do_drive_cmd().
1074 */
1075extern void ide_init_drive_cmd (struct request *rq);
1076
1077/*
1078 * this function returns error location sector offset in case of a write error
1079 */
1080extern u64 ide_get_error_location(ide_drive_t *, char *);
1081
1082/*
1083 * "action" parameter type for ide_do_drive_cmd() below.
1084 */
1085typedef enum {
1086 ide_wait, /* insert rq at end of list, and wait for it */
1da177e4
LT		 1087 ide_preempt, /* insert rq in front of current request */
1088 ide_head_wait, /* insert rq in front of current request and wait for it */
1089 ide_end /* insert rq at end of list, but don't wait for it */
1090} ide_action_t;
1091
1da177e4
LT		 1092extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
1093
1094/*
1095 * Clean up after success/failure of an explicit drive cmd.
1096 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_CMD).
1097 * stat/err are used only when (HWGROUP(drive)->rq->cmd == IDE_DRIVE_TASK_MASK).
1098 *
1099 * (ide_drive_t *drive, u8 stat, u8 err)
1100 */
1101extern void ide_end_drive_cmd(ide_drive_t *, u8, u8);
1102
1103/*
1104 * Issue ATA command and wait for completion.
1105 * Use for implementing commands in kernel
1106 *
1107 * (ide_drive_t *drive, u8 cmd, u8 nsect, u8 feature, u8 sectors, u8 *buf)
1108 */
1109extern int ide_wait_cmd(ide_drive_t *, u8, u8, u8, u8, u8 *);
1110
1111typedef struct ide_task_s {
1112/*
1113 * struct hd_drive_task_hdr tf;
1114 * task_struct_t tf;
1115 * struct hd_drive_hob_hdr hobf;
1116 * hob_struct_t hobf;
1117 */
1118 task_ioreg_t tfRegister[8];
1119 task_ioreg_t hobRegister[8];
1120 ide_reg_valid_t tf_out_flags;
1121 ide_reg_valid_t tf_in_flags;
1122 int data_phase;
1123 int command_type;
1124 ide_pre_handler_t *prehandler;
1125 ide_handler_t *handler;
1126 struct request *rq; /* copy of request */
1127 void *special; /* valid_t generally */
1128} ide_task_t;
1129
1130extern u32 ide_read_24(ide_drive_t *);
1131
1132extern void SELECT_DRIVE(ide_drive_t *);
1133extern void SELECT_INTERRUPT(ide_drive_t *);
1134extern void SELECT_MASK(ide_drive_t *, int);
1135extern void QUIRK_LIST(ide_drive_t *);
1136
1137extern int drive_is_ready(ide_drive_t *);
1138extern int wait_for_ready(ide_drive_t *, int /* timeout */);
1139
1140/*
1141 * taskfile io for disks for now...and builds request from ide_ioctl
1142 */
1143extern ide_startstop_t do_rw_taskfile(ide_drive_t *, ide_task_t *);
1144
1145/*
1146 * Special Flagged Register Validation Caller
1147 */
1148extern ide_startstop_t flagged_taskfile(ide_drive_t *, ide_task_t *);
1149
1150extern ide_startstop_t set_multmode_intr(ide_drive_t *);
1151extern ide_startstop_t set_geometry_intr(ide_drive_t *);
1152extern ide_startstop_t recal_intr(ide_drive_t *);
1153extern ide_startstop_t task_no_data_intr(ide_drive_t *);
1154extern ide_startstop_t task_in_intr(ide_drive_t *);
1155extern ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
1156
1157extern int ide_raw_taskfile(ide_drive_t *, ide_task_t *, u8 *);
1158
1159int ide_taskfile_ioctl(ide_drive_t *, unsigned int, unsigned long);
1160int ide_cmd_ioctl(ide_drive_t *, unsigned int, unsigned long);
1161int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long);
1162
1163extern int system_bus_clock(void);
1164
1165extern int ide_driveid_update(ide_drive_t *);
1166extern int ide_ata66_check(ide_drive_t *, ide_task_t *);
1167extern int ide_config_drive_speed(ide_drive_t *, u8);
1168extern u8 eighty_ninty_three (ide_drive_t *);
1169extern int set_transfer(ide_drive_t *, ide_task_t *);
1170extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *);
1171
1172extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout);
1173
1174/*
1175 * ide_stall_queue() can be used by a drive to give excess bandwidth back
1176 * to the hwgroup by sleeping for timeout jiffies.
1177 */
1178extern void ide_stall_queue(ide_drive_t *drive, unsigned long timeout);
1179
1180extern int ide_spin_wait_hwgroup(ide_drive_t *);
1181extern void ide_timer_expiry(unsigned long);
1182extern irqreturn_t ide_intr(int irq, void *dev_id, struct pt_regs *regs);
1183extern void do_ide_request(request_queue_t *);
1da177e4
LT		 1184
1185void ide_init_disk(struct gendisk *, ide_drive_t *);
1186
1da177e4
LT		 1187extern int ideprobe_init(void);
1188
1189extern void ide_scan_pcibus(int scan_direction) __init;
863b18f4
L		 1190extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner);
1191#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE)
1da177e4
LT		 1192extern void ide_pci_unregister_driver(struct pci_driver *driver);
1193void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
1194extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
1195
1196extern void default_hwif_iops(ide_hwif_t *);
1197extern void default_hwif_mmiops(ide_hwif_t *);
1198extern void default_hwif_transport(ide_hwif_t *);
1199
8604affd
BZ		 1200void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
1201void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
1da177e4
LT		 1202
1203#define ON_BOARD 1
1204#define NEVER_BOARD 0
1205
1206#ifdef CONFIG_BLK_DEV_OFFBOARD
1207# define OFF_BOARD ON_BOARD
1208#else /* CONFIG_BLK_DEV_OFFBOARD */
1209# define OFF_BOARD NEVER_BOARD
1210#endif /* CONFIG_BLK_DEV_OFFBOARD */
1211
1212#define NODMA 0
1213#define NOAUTODMA 1
1214#define AUTODMA 2
1215
1216typedef struct ide_pci_enablebit_s {
1217 u8 reg; /* byte pci reg holding the enable-bit */
1218 u8 mask; /* mask to isolate the enable-bit */
1219 u8 val; /* value of masked reg when "enabled" */
1220} ide_pci_enablebit_t;
1221
1222enum {
1223 /* Uses ISA control ports not PCI ones. */
1224 IDEPCI_FLAG_ISA_PORTS = (1 << 0),
1da177e4
LT		 1225};
1226
1227typedef struct ide_pci_device_s {
1228 char *name;
1229 int (*init_setup)(struct pci_dev *, struct ide_pci_device_s *);
1230 void (*init_setup_dma)(struct pci_dev *, struct ide_pci_device_s *, ide_hwif_t *);
1231 unsigned int (*init_chipset)(struct pci_dev *, const char *);
1232 void (*init_iops)(ide_hwif_t *);
1233 void (*init_hwif)(ide_hwif_t *);
1234 void (*init_dma)(ide_hwif_t *, unsigned long);
1235 void (*fixup)(ide_hwif_t *);
1236 u8 channels;
1237 u8 autodma;
1238 ide_pci_enablebit_t enablebits[2];
1239 u8 bootable;
1240 unsigned int extra;
1241 struct ide_pci_device_s *next;
1242 u8 flags;
1243} ide_pci_device_t;
1244
1245extern int ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
1246extern int ide_setup_pci_devices(struct pci_dev *, struct pci_dev *, ide_pci_device_t *);
1247
1248void ide_map_sg(ide_drive_t *, struct request *);
1249void ide_init_sg_cmd(ide_drive_t *, struct request *);
1250
1251#define BAD_DMA_DRIVE 0
1252#define GOOD_DMA_DRIVE 1
1253
1254#ifdef CONFIG_BLK_DEV_IDEDMA
65e5f2e3
JC		 1255struct drive_list_entry {
1256 const char *id_model;
1257 const char *id_firmware;
1258};
1259
1260int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *);
1da177e4
LT		 1261int __ide_dma_bad_drive(ide_drive_t *);
1262int __ide_dma_good_drive(ide_drive_t *);
1263int ide_use_dma(ide_drive_t *);
1264int __ide_dma_off(ide_drive_t *);
1265void ide_dma_verbose(ide_drive_t *);
1266ide_startstop_t ide_dma_intr(ide_drive_t *);
1267
1268#ifdef CONFIG_BLK_DEV_IDEDMA_PCI
1269extern int ide_build_sglist(ide_drive_t *, struct request *);
1270extern int ide_build_dmatable(ide_drive_t *, struct request *);
1271extern void ide_destroy_dmatable(ide_drive_t *);
1272extern int ide_release_dma(ide_hwif_t *);
1273extern void ide_setup_dma(ide_hwif_t *, unsigned long, unsigned int);
1274
1275extern int __ide_dma_host_off(ide_drive_t *);
1276extern int __ide_dma_off_quietly(ide_drive_t *);
1277extern int __ide_dma_host_on(ide_drive_t *);
1278extern int __ide_dma_on(ide_drive_t *);
1279extern int __ide_dma_check(ide_drive_t *);
1280extern int ide_dma_setup(ide_drive_t *);
1281extern void ide_dma_start(ide_drive_t *);
1282extern int __ide_dma_end(ide_drive_t *);
1283extern int __ide_dma_lostirq(ide_drive_t *);
1284extern int __ide_dma_timeout(ide_drive_t *);
1285#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */
1286
1287#else
1288static inline int ide_use_dma(ide_drive_t *drive) { return 0; }
1289static inline int __ide_dma_off(ide_drive_t *drive) { return 0; }
1290static inline void ide_dma_verbose(ide_drive_t *drive) { ; }
1291#endif /* CONFIG_BLK_DEV_IDEDMA */
1292
1293#ifndef CONFIG_BLK_DEV_IDEDMA_PCI
1294static inline void ide_release_dma(ide_hwif_t *drive) {;}
1295#endif
1296
1297extern int ide_hwif_request_regions(ide_hwif_t *hwif);
1298extern void ide_hwif_release_regions(ide_hwif_t* hwif);
1299extern void ide_unregister (unsigned int index);
1300
1301void ide_register_region(struct gendisk *);
1302void ide_unregister_region(struct gendisk *);
1303
1304void ide_undecoded_slave(ide_hwif_t *);
1305
1306int probe_hwif_init_with_fixup(ide_hwif_t *, void (*)(ide_hwif_t *));
1307extern int probe_hwif_init(ide_hwif_t *);
1308
1309static inline void *ide_get_hwifdata (ide_hwif_t * hwif)
1310{
1311 return hwif->hwif_data;
1312}
1313
1314static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data)
1315{
1316 hwif->hwif_data = data;
1317}
1318
1319/* ide-lib.c */
1320extern u8 ide_dma_speed(ide_drive_t *drive, u8 mode);
1321extern u8 ide_rate_filter(u8 mode, u8 speed);
1322extern int ide_dma_enable(ide_drive_t *drive);
1323extern char *ide_xfer_verbose(u8 xfer_rate);
1324extern void ide_toggle_bounce(ide_drive_t *drive, int on);
1325extern int ide_set_xfer_rate(ide_drive_t *drive, u8 rate);
1326
1327u8 ide_dump_status(ide_drive_t *, const char *, u8);
1328
1329typedef struct ide_pio_timings_s {
1330 int setup_time; /* Address setup (ns) minimum */
1331 int active_time; /* Active pulse (ns) minimum */
1332 int cycle_time; /* Cycle time (ns) minimum = (setup + active + recovery) */
1333} ide_pio_timings_t;
1334
1335typedef struct ide_pio_data_s {
1336 u8 pio_mode;
1337 u8 use_iordy;
1338 u8 overridden;
1339 u8 blacklisted;
1340 unsigned int cycle_time;
1341} ide_pio_data_t;
1342
1343extern u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d);
1344extern const ide_pio_timings_t ide_pio_timings[6];
1345
1346
1347extern spinlock_t ide_lock;
1348extern struct semaphore ide_cfg_sem;
1349/*
1350 * Structure locking:
1351 *
1352 * ide_cfg_sem and ide_lock together protect changes to
1353 * ide_hwif_t->{next,hwgroup}
1354 * ide_drive_t->next
1355 *
1356 * ide_hwgroup_t->busy: ide_lock
1357 * ide_hwgroup_t->hwif: ide_lock
1358 * ide_hwif_t->mate: constant, no locking
1359 * ide_drive_t->hwif: constant, no locking
1360 */
1361
1362#define local_irq_set(flags) do { local_save_flags((flags)); local_irq_enable(); } while (0)
1363
1364extern struct bus_type ide_bus_type;
1365
1366/* check if CACHE FLUSH (EXT) command is supported (bits defined in ATA-6) */
1367#define ide_id_has_flush_cache(id) ((id)->cfs_enable_2 & 0x3000)
1368
1369/* some Maxtor disks have bit 13 defined incorrectly so check bit 10 too */
1370#define ide_id_has_flush_cache_ext(id) \
1371 (((id)->cfs_enable_2 & 0x2400) == 0x2400)
1372
86b37860
CL		 1373static inline int hwif_to_node(ide_hwif_t *hwif)
1374{
1375 struct pci_dev *dev = hwif->pci_dev;
1376 return dev ? pcibus_to_node(dev->bus) : -1;
1377}
1378
1da177e4 1379#endif /* _IDE_H */
Linux kernel - Deliverables
This page took 0.238326 seconds and 5 git commands to generate.