Commit | Line | Data |
---|---|---|
704232c2 JB |
1 | #ifndef __LINUX_NL80211_H |
2 | #define __LINUX_NL80211_H | |
3 | /* | |
4 | * 802.11 netlink interface public header | |
5 | * | |
026331c4 | 6 | * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
10ec4f1d LR |
7 | * Copyright 2008 Michael Wu <flamingice@sourmilk.net> |
8 | * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> | |
9 | * Copyright 2008 Michael Buesch <mb@bu3sch.de> | |
6bad8766 | 10 | * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> |
10ec4f1d LR |
11 | * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> |
12 | * Copyright 2008 Colin McCabe <colin@cozybit.com> | |
13 | * | |
14 | * Permission to use, copy, modify, and/or distribute this software for any | |
15 | * purpose with or without fee is hereby granted, provided that the above | |
16 | * copyright notice and this permission notice appear in all copies. | |
17 | * | |
18 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
19 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
20 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
21 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
22 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
23 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
24 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
25 | * | |
704232c2 JB |
26 | */ |
27 | ||
eccb8e8f JB |
28 | #include <linux/types.h> |
29 | ||
5727ef1b JB |
30 | /** |
31 | * DOC: Station handling | |
32 | * | |
33 | * Stations are added per interface, but a special case exists with VLAN | |
34 | * interfaces. When a station is bound to an AP interface, it may be moved | |
35 | * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). | |
36 | * The station is still assumed to belong to the AP interface it was added | |
37 | * to. | |
38 | * | |
39 | * TODO: need more info? | |
40 | */ | |
41 | ||
55682965 JB |
42 | /** |
43 | * enum nl80211_commands - supported nl80211 commands | |
44 | * | |
45 | * @NL80211_CMD_UNSPEC: unspecified command to catch errors | |
46 | * | |
47 | * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request | |
48 | * to get a list of all present wiphys. | |
31888487 | 49 | * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
72bdcf34 | 50 | * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
b9a5f8ca JM |
51 | * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, |
52 | * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, | |
53 | * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, | |
54 | * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. | |
f444de05 JB |
55 | * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL |
56 | * instead, the support here is for backward compatibility only. | |
55682965 JB |
57 | * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
58 | * or rename notification. Has attributes %NL80211_ATTR_WIPHY and | |
59 | * %NL80211_ATTR_WIPHY_NAME. | |
60 | * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes | |
61 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. | |
62 | * | |
63 | * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; | |
64 | * either a dump request on a %NL80211_ATTR_WIPHY or a specific get | |
65 | * on an %NL80211_ATTR_IFINDEX is supported. | |
66 | * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires | |
67 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. | |
68 | * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response | |
69 | * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, | |
70 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also | |
71 | * be sent from userspace to request creation of a new virtual interface, | |
72 | * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and | |
73 | * %NL80211_ATTR_IFNAME. | |
74 | * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes | |
75 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from | |
76 | * userspace to request deletion of a virtual interface, then requires | |
77 | * attribute %NL80211_ATTR_IFINDEX. | |
78 | * | |
41ade00f JB |
79 | * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
80 | * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. | |
3cfcf6ac JM |
81 | * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, |
82 | * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. | |
41ade00f | 83 | * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, |
faa8fdc8 JM |
84 | * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, |
85 | * and %NL80211_ATTR_KEY_SEQ attributes. | |
41ade00f JB |
86 | * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX |
87 | * or %NL80211_ATTR_MAC. | |
88 | * | |
ed1b6cc7 JB |
89 | * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a |
90 | * %NL80222_CMD_NEW_BEACON message) | |
91 | * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface | |
92 | * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, | |
d03415e6 | 93 | * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. |
ed1b6cc7 JB |
94 | * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, |
95 | * parameters are like for %NL80211_CMD_SET_BEACON. | |
96 | * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it | |
97 | * | |
5727ef1b JB |
98 | * @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
99 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
100 | * @NL80211_CMD_SET_STATION: Set station attributes for station identified by | |
101 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
102 | * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the | |
103 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
104 | * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC | |
105 | * or, if no MAC address given, all stations, on the interface identified | |
106 | * by %NL80211_ATTR_IFINDEX. | |
107 | * | |
2ec600d6 LCC |
108 | * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
109 | * destination %NL80211_ATTR_MAC on the interface identified by | |
110 | * %NL80211_ATTR_IFINDEX. | |
111 | * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to | |
112 | * destination %NL80211_ATTR_MAC on the interface identified by | |
113 | * %NL80211_ATTR_IFINDEX. | |
114 | * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the | |
115 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
116 | * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC | |
117 | * or, if no MAC address given, all mesh paths, on the interface identified | |
118 | * by %NL80211_ATTR_IFINDEX. | |
9f1ba906 JM |
119 | * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
120 | * %NL80211_ATTR_IFINDEX. | |
2ec600d6 | 121 | * |
f130347c LR |
122 | * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set |
123 | * regulatory domain. | |
b2e1b302 LR |
124 | * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
125 | * after being queried by the kernel. CRDA replies by sending a regulatory | |
126 | * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our | |
127 | * current alpha2 if it found a match. It also provides | |
128 | * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each | |
129 | * regulatory rule is a nested set of attributes given by | |
130 | * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and | |
131 | * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by | |
132 | * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and | |
133 | * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. | |
134 | * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain | |
77c2061d | 135 | * to the specified ISO/IEC 3166-1 alpha2 country code. The core will |
b2e1b302 LR |
136 | * store this as a valid request and then query userspace for it. |
137 | * | |
93da9cc1 | 138 | * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the |
139 | * interface identified by %NL80211_ATTR_IFINDEX | |
140 | * | |
141 | * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the | |
142 | * interface identified by %NL80211_ATTR_IFINDEX | |
143 | * | |
9aed3cc1 JM |
144 | * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The |
145 | * interface is identified with %NL80211_ATTR_IFINDEX and the management | |
146 | * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be | |
147 | * added to the end of the specified management frame is specified with | |
148 | * %NL80211_ATTR_IE. If the command succeeds, the requested data will be | |
149 | * added to all specified management frames generated by | |
150 | * kernel/firmware/driver. | |
65fc73ac JM |
151 | * Note: This command has been removed and it is only reserved at this |
152 | * point to avoid re-using existing command number. The functionality this | |
153 | * command was planned for has been provided with cleaner design with the | |
154 | * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, | |
155 | * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, | |
156 | * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. | |
9aed3cc1 | 157 | * |
2a519311 JB |
158 | * @NL80211_CMD_GET_SCAN: get scan results |
159 | * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters | |
160 | * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to | |
161 | * NL80211_CMD_GET_SCAN and on the "scan" multicast group) | |
162 | * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, | |
163 | * partial scan results may be available | |
164 | * | |
61fa713c HS |
165 | * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation |
166 | * or noise level | |
167 | * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to | |
168 | * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) | |
169 | * | |
73d54c9e LR |
170 | * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain |
171 | * has been changed and provides details of the request information | |
172 | * that caused the change such as who initiated the regulatory request | |
173 | * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx | |
174 | * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if | |
175 | * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or | |
176 | * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain | |
177 | * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is | |
178 | * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on | |
179 | * to (%NL80211_ATTR_REG_ALPHA2). | |
6bad8766 LR |
180 | * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon |
181 | * has been found while world roaming thus enabling active scan or | |
182 | * any mode of operation that initiates TX (beacons) on a channel | |
183 | * where we would not have been able to do either before. As an example | |
184 | * if you are world roaming (regulatory domain set to world or if your | |
185 | * driver is using a custom world roaming regulatory domain) and while | |
186 | * doing a passive scan on the 5 GHz band you find an AP there (if not | |
187 | * on a DFS channel) you will now be able to actively scan for that AP | |
188 | * or use AP mode on your card on that same channel. Note that this will | |
189 | * never be used for channels 1-11 on the 2 GHz band as they are always | |
190 | * enabled world wide. This beacon hint is only sent if your device had | |
191 | * either disabled active scanning or beaconing on a channel. We send to | |
192 | * userspace the wiphy on which we removed a restriction from | |
193 | * (%NL80211_ATTR_WIPHY) and the channel on which this occurred | |
194 | * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) | |
195 | * the beacon hint was processed. | |
73d54c9e | 196 | * |
636a5d36 JM |
197 | * @NL80211_CMD_AUTHENTICATE: authentication request and notification. |
198 | * This command is used both as a command (request to authenticate) and | |
199 | * as an event on the "mlme" multicast group indicating completion of the | |
200 | * authentication process. | |
201 | * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the | |
202 | * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and | |
203 | * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify | |
204 | * the SSID (mainly for association, but is included in authentication | |
205 | * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used | |
206 | * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE | |
207 | * is used to specify the authentication type. %NL80211_ATTR_IE is used to | |
208 | * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) | |
209 | * to be added to the frame. | |
210 | * When used as an event, this reports reception of an Authentication | |
6039f6d2 JM |
211 | * frame in station and IBSS modes when the local MLME processed the |
212 | * frame, i.e., it was for the local STA and was received in correct | |
213 | * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the | |
214 | * MLME SAP interface (kernel providing MLME, userspace SME). The | |
1965c853 JM |
215 | * included %NL80211_ATTR_FRAME attribute contains the management frame |
216 | * (including both the header and frame body, but not FCS). This event is | |
217 | * also used to indicate if the authentication attempt timed out. In that | |
218 | * case the %NL80211_ATTR_FRAME attribute is replaced with a | |
219 | * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which | |
220 | * pending authentication timed out). | |
636a5d36 JM |
221 | * @NL80211_CMD_ASSOCIATE: association request and notification; like |
222 | * NL80211_CMD_AUTHENTICATE but for Association and Reassociation | |
223 | * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, | |
224 | * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). | |
225 | * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like | |
6039f6d2 | 226 | * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to |
636a5d36 JM |
227 | * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication |
228 | * primitives). | |
229 | * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like | |
6039f6d2 | 230 | * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to |
636a5d36 | 231 | * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). |
6039f6d2 | 232 | * |
a3b8b056 JM |
233 | * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael |
234 | * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the | |
235 | * event includes %NL80211_ATTR_MAC to describe the source MAC address of | |
236 | * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key | |
237 | * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and | |
238 | * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this | |
239 | * event matches with MLME-MICHAELMICFAILURE.indication() primitive | |
240 | * | |
04a773ad JB |
241 | * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a |
242 | * FREQ attribute (for the initial frequency if no peer can be found) | |
243 | * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those | |
244 | * should be fixed rather than automatically determined. Can only be | |
245 | * executed on a network interface that is UP, and fixed BSSID/FREQ | |
8e30bc55 JB |
246 | * may be rejected. Another optional parameter is the beacon interval, |
247 | * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not | |
248 | * given defaults to 100 TU (102.4ms). | |
04a773ad JB |
249 | * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is |
250 | * determined by the network interface. | |
251 | * | |
aff89a9b JB |
252 | * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute |
253 | * to identify the device, and the TESTDATA blob attribute to pass through | |
254 | * to the driver. | |
255 | * | |
b23aa676 SO |
256 | * @NL80211_CMD_CONNECT: connection request and notification; this command |
257 | * requests to connect to a specified network but without separating | |
258 | * auth and assoc steps. For this, you need to specify the SSID in a | |
259 | * %NL80211_ATTR_SSID attribute, and can optionally specify the association | |
260 | * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, | |
261 | * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT. | |
262 | * It is also sent as an event, with the BSSID and response IEs when the | |
263 | * connection is established or failed to be established. This can be | |
264 | * determined by the STATUS_CODE attribute. | |
265 | * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), | |
266 | * sent as an event when the card/driver roamed by itself. | |
267 | * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify | |
268 | * userspace that a connection was dropped by the AP or due to other | |
269 | * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and | |
270 | * %NL80211_ATTR_REASON_CODE attributes are used. | |
271 | * | |
463d0183 JB |
272 | * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices |
273 | * associated with this wiphy must be down and will follow. | |
274 | * | |
9588bbd5 JM |
275 | * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified |
276 | * channel for the specified amount of time. This can be used to do | |
277 | * off-channel operations like transmit a Public Action frame and wait for | |
278 | * a response while being associated to an AP on another channel. | |
279 | * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which | |
280 | * radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the | |
281 | * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be | |
282 | * optionally used to specify additional channel parameters. | |
283 | * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds | |
284 | * to remain on the channel. This command is also used as an event to | |
285 | * notify when the requested duration starts (it may take a while for the | |
286 | * driver to schedule this time due to other concurrent needs for the | |
287 | * radio). | |
288 | * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) | |
289 | * that will be included with any events pertaining to this request; | |
290 | * the cookie is also used to cancel the request. | |
291 | * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a | |
292 | * pending remain-on-channel duration if the desired operation has been | |
293 | * completed prior to expiration of the originally requested duration. | |
294 | * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the | |
295 | * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to | |
296 | * uniquely identify the request. | |
297 | * This command is also used as an event to notify when a requested | |
298 | * remain-on-channel duration has expired. | |
299 | * | |
13ae75b1 JM |
300 | * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX |
301 | * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface | |
302 | * and @NL80211_ATTR_TX_RATES the set of allowed rates. | |
303 | * | |
026331c4 JM |
304 | * @NL80211_CMD_REGISTER_ACTION: Register for receiving certain action frames |
305 | * (via @NL80211_CMD_ACTION) for processing in userspace. This command | |
306 | * requires an interface index and a match attribute containing the first | |
307 | * few bytes of the frame that should match, e.g. a single byte for only | |
308 | * a category match or four bytes for vendor frames including the OUI. | |
309 | * The registration cannot be dropped, but is removed automatically | |
310 | * when the netlink socket is closed. Multiple registrations can be made. | |
311 | * @NL80211_CMD_ACTION: Action frame TX request and RX notification. This | |
312 | * command is used both as a request to transmit an Action frame and as an | |
313 | * event indicating reception of an Action frame that was not processed in | |
314 | * kernel code, but is for us (i.e., which may need to be processed in a | |
315 | * user space application). %NL80211_ATTR_FRAME is used to specify the | |
316 | * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and | |
317 | * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on | |
318 | * which channel the frame is to be transmitted or was received. This | |
319 | * channel has to be the current channel (remain-on-channel or the | |
320 | * operational channel). When called, this operation returns a cookie | |
321 | * (%NL80211_ATTR_COOKIE) that will be included with the TX status event | |
322 | * pertaining to the TX request. | |
323 | * @NL80211_CMD_ACTION_TX_STATUS: Report TX status of an Action frame | |
324 | * transmitted with %NL80211_CMD_ACTION. %NL80211_ATTR_COOKIE identifies | |
325 | * the TX command and %NL80211_ATTR_FRAME includes the contents of the | |
326 | * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged | |
327 | * the frame. | |
d6dc1a38 JO |
328 | * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command |
329 | * is used to configure connection quality monitoring notification trigger | |
330 | * levels. | |
331 | * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This | |
332 | * command is used as an event to indicate the that a trigger level was | |
333 | * reached. | |
f444de05 JB |
334 | * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ |
335 | * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed | |
336 | * by %NL80211_ATTR_IFINDEX) shall operate on. | |
337 | * In case multiple channels are supported by the device, the mechanism | |
338 | * with which it switches channels is implementation-defined. | |
339 | * When a monitor interface is given, it can only switch channel while | |
340 | * no other interfaces are operating to avoid disturbing the operation | |
341 | * of any other interfaces, and other interfaces will again take | |
342 | * precedence when they are used. | |
026331c4 | 343 | * |
55682965 JB |
344 | * @NL80211_CMD_MAX: highest used command number |
345 | * @__NL80211_CMD_AFTER_LAST: internal use | |
346 | */ | |
347 | enum nl80211_commands { | |
348 | /* don't change the order or add anything inbetween, this is ABI! */ | |
349 | NL80211_CMD_UNSPEC, | |
350 | ||
351 | NL80211_CMD_GET_WIPHY, /* can dump */ | |
352 | NL80211_CMD_SET_WIPHY, | |
353 | NL80211_CMD_NEW_WIPHY, | |
354 | NL80211_CMD_DEL_WIPHY, | |
355 | ||
356 | NL80211_CMD_GET_INTERFACE, /* can dump */ | |
357 | NL80211_CMD_SET_INTERFACE, | |
358 | NL80211_CMD_NEW_INTERFACE, | |
359 | NL80211_CMD_DEL_INTERFACE, | |
360 | ||
41ade00f JB |
361 | NL80211_CMD_GET_KEY, |
362 | NL80211_CMD_SET_KEY, | |
363 | NL80211_CMD_NEW_KEY, | |
364 | NL80211_CMD_DEL_KEY, | |
365 | ||
ed1b6cc7 JB |
366 | NL80211_CMD_GET_BEACON, |
367 | NL80211_CMD_SET_BEACON, | |
368 | NL80211_CMD_NEW_BEACON, | |
369 | NL80211_CMD_DEL_BEACON, | |
370 | ||
5727ef1b JB |
371 | NL80211_CMD_GET_STATION, |
372 | NL80211_CMD_SET_STATION, | |
373 | NL80211_CMD_NEW_STATION, | |
374 | NL80211_CMD_DEL_STATION, | |
375 | ||
2ec600d6 LCC |
376 | NL80211_CMD_GET_MPATH, |
377 | NL80211_CMD_SET_MPATH, | |
378 | NL80211_CMD_NEW_MPATH, | |
379 | NL80211_CMD_DEL_MPATH, | |
380 | ||
9f1ba906 JM |
381 | NL80211_CMD_SET_BSS, |
382 | ||
b2e1b302 LR |
383 | NL80211_CMD_SET_REG, |
384 | NL80211_CMD_REQ_SET_REG, | |
385 | ||
93da9cc1 | 386 | NL80211_CMD_GET_MESH_PARAMS, |
387 | NL80211_CMD_SET_MESH_PARAMS, | |
388 | ||
65fc73ac | 389 | NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, |
9aed3cc1 | 390 | |
f130347c LR |
391 | NL80211_CMD_GET_REG, |
392 | ||
2a519311 JB |
393 | NL80211_CMD_GET_SCAN, |
394 | NL80211_CMD_TRIGGER_SCAN, | |
395 | NL80211_CMD_NEW_SCAN_RESULTS, | |
396 | NL80211_CMD_SCAN_ABORTED, | |
397 | ||
73d54c9e LR |
398 | NL80211_CMD_REG_CHANGE, |
399 | ||
6039f6d2 JM |
400 | NL80211_CMD_AUTHENTICATE, |
401 | NL80211_CMD_ASSOCIATE, | |
402 | NL80211_CMD_DEAUTHENTICATE, | |
403 | NL80211_CMD_DISASSOCIATE, | |
404 | ||
a3b8b056 JM |
405 | NL80211_CMD_MICHAEL_MIC_FAILURE, |
406 | ||
6bad8766 LR |
407 | NL80211_CMD_REG_BEACON_HINT, |
408 | ||
04a773ad JB |
409 | NL80211_CMD_JOIN_IBSS, |
410 | NL80211_CMD_LEAVE_IBSS, | |
411 | ||
aff89a9b JB |
412 | NL80211_CMD_TESTMODE, |
413 | ||
b23aa676 SO |
414 | NL80211_CMD_CONNECT, |
415 | NL80211_CMD_ROAM, | |
416 | NL80211_CMD_DISCONNECT, | |
417 | ||
463d0183 JB |
418 | NL80211_CMD_SET_WIPHY_NETNS, |
419 | ||
61fa713c HS |
420 | NL80211_CMD_GET_SURVEY, |
421 | NL80211_CMD_NEW_SURVEY_RESULTS, | |
422 | ||
67fbb16b SO |
423 | NL80211_CMD_SET_PMKSA, |
424 | NL80211_CMD_DEL_PMKSA, | |
425 | NL80211_CMD_FLUSH_PMKSA, | |
426 | ||
9588bbd5 JM |
427 | NL80211_CMD_REMAIN_ON_CHANNEL, |
428 | NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, | |
429 | ||
13ae75b1 JM |
430 | NL80211_CMD_SET_TX_BITRATE_MASK, |
431 | ||
026331c4 JM |
432 | NL80211_CMD_REGISTER_ACTION, |
433 | NL80211_CMD_ACTION, | |
434 | NL80211_CMD_ACTION_TX_STATUS, | |
435 | ||
ffb9eb3d KV |
436 | NL80211_CMD_SET_POWER_SAVE, |
437 | NL80211_CMD_GET_POWER_SAVE, | |
438 | ||
d6dc1a38 JO |
439 | NL80211_CMD_SET_CQM, |
440 | NL80211_CMD_NOTIFY_CQM, | |
441 | ||
f444de05 JB |
442 | NL80211_CMD_SET_CHANNEL, |
443 | ||
b2e1b302 | 444 | /* add new commands above here */ |
564d9bdd | 445 | |
55682965 JB |
446 | /* used to define NL80211_CMD_MAX below */ |
447 | __NL80211_CMD_AFTER_LAST, | |
448 | NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 | |
449 | }; | |
450 | ||
9f1ba906 JM |
451 | /* |
452 | * Allow user space programs to use #ifdef on new commands by defining them | |
453 | * here | |
454 | */ | |
455 | #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS | |
9aed3cc1 | 456 | #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE |
73d54c9e | 457 | #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE |
6039f6d2 JM |
458 | #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE |
459 | #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE | |
460 | #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE | |
461 | #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE | |
6bad8766 | 462 | #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT |
73d54c9e | 463 | |
55682965 JB |
464 | /** |
465 | * enum nl80211_attrs - nl80211 netlink attributes | |
466 | * | |
467 | * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors | |
468 | * | |
469 | * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. | |
470 | * /sys/class/ieee80211/<phyname>/index | |
471 | * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) | |
31888487 | 472 | * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
72bdcf34 | 473 | * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz |
094d05dc | 474 | * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
72bdcf34 | 475 | * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): |
094d05dc | 476 | * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including |
72bdcf34 | 477 | * this attribute) |
094d05dc S |
478 | * NL80211_CHAN_HT20 = HT20 only |
479 | * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel | |
480 | * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel | |
b9a5f8ca JM |
481 | * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is |
482 | * less than or equal to the RTS threshold; allowed range: 1..255; | |
483 | * dot11ShortRetryLimit; u8 | |
484 | * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is | |
485 | * greater than the RTS threshold; allowed range: 1..255; | |
486 | * dot11ShortLongLimit; u8 | |
487 | * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum | |
488 | * length in octets for frames; allowed range: 256..8000, disable | |
489 | * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 | |
490 | * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length | |
491 | * larger than or equal to this use RTS/CTS handshake); allowed range: | |
492 | * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 | |
81077e82 LT |
493 | * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 |
494 | * section 7.3.2.9; dot11CoverageClass; u8 | |
55682965 JB |
495 | * |
496 | * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on | |
497 | * @NL80211_ATTR_IFNAME: network interface name | |
498 | * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype | |
499 | * | |
41ade00f JB |
500 | * @NL80211_ATTR_MAC: MAC address (various uses) |
501 | * | |
502 | * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of | |
503 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
504 | * keys | |
505 | * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) | |
506 | * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
507 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
508 | * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
509 | * CCMP keys, each six bytes in little endian | |
510 | * | |
ed1b6cc7 JB |
511 | * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
512 | * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing | |
513 | * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE | |
514 | * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE | |
515 | * | |
5727ef1b JB |
516 | * @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
517 | * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of | |
eccb8e8f | 518 | * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) |
5727ef1b JB |
519 | * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by |
520 | * IEEE 802.11 7.3.1.6 (u16). | |
521 | * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported | |
522 | * rates as defined by IEEE 802.11 7.3.2.2 but without the length | |
523 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
524 | * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station | |
525 | * to, or the AP interface the station was originally added to to. | |
2ec600d6 | 526 | * @NL80211_ATTR_STA_INFO: information about a station, part of station info |
fd5b74dc | 527 | * given for %NL80211_CMD_GET_STATION, nested attribute containing |
2ec600d6 | 528 | * info as possible, see &enum nl80211_sta_info. |
5727ef1b | 529 | * |
ee688b00 JB |
530 | * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
531 | * consisting of a nested array. | |
532 | * | |
2ec600d6 LCC |
533 | * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
534 | * @NL80211_ATTR_PLINK_ACTION: action to perform on the mesh peer link. | |
535 | * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. | |
536 | * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path | |
537 | * info given for %NL80211_CMD_GET_MPATH, nested attribute described at | |
538 | * &enum nl80211_mpath_info. | |
539 | * | |
66f7ac50 MW |
540 | * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
541 | * &enum nl80211_mntr_flags. | |
542 | * | |
b2e1b302 LR |
543 | * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
544 | * current regulatory domain should be set to or is already set to. | |
545 | * For example, 'CR', for Costa Rica. This attribute is used by the kernel | |
546 | * to query the CRDA to retrieve one regulatory domain. This attribute can | |
547 | * also be used by userspace to query the kernel for the currently set | |
548 | * regulatory domain. We chose an alpha2 as that is also used by the | |
549 | * IEEE-802.11d country information element to identify a country. | |
550 | * Users can also simply ask the wireless core to set regulatory domain | |
551 | * to a specific alpha2. | |
552 | * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory | |
553 | * rules. | |
554 | * | |
9f1ba906 JM |
555 | * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
556 | * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled | |
557 | * (u8, 0 or 1) | |
558 | * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled | |
559 | * (u8, 0 or 1) | |
90c97a04 JM |
560 | * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
561 | * rates in format defined by IEEE 802.11 7.3.2.2 but without the length | |
562 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
9f1ba906 | 563 | * |
36aedc90 JM |
564 | * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
565 | * association request when used with NL80211_CMD_NEW_STATION) | |
566 | * | |
f59ac048 LR |
567 | * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
568 | * supported interface types, each a flag attribute with the number | |
569 | * of the interface mode. | |
570 | * | |
9aed3cc1 JM |
571 | * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for |
572 | * %NL80211_CMD_SET_MGMT_EXTRA_IE. | |
573 | * | |
574 | * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with | |
575 | * %NL80211_CMD_SET_MGMT_EXTRA_IE). | |
576 | * | |
2a519311 JB |
577 | * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with |
578 | * a single scan request, a wiphy attribute. | |
18a83659 JB |
579 | * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements |
580 | * that can be added to a scan request | |
2a519311 JB |
581 | * |
582 | * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) | |
583 | * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive | |
584 | * scanning and include a zero-length SSID (wildcard) for wildcard scan | |
2a519311 JB |
585 | * @NL80211_ATTR_BSS: scan result BSS |
586 | * | |
73d54c9e LR |
587 | * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain |
588 | * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* | |
589 | * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently | |
590 | * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) | |
591 | * | |
8fdc621d JB |
592 | * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies |
593 | * an array of command numbers (i.e. a mapping index to command number) | |
594 | * that the driver for the given wiphy supports. | |
595 | * | |
6039f6d2 JM |
596 | * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header |
597 | * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and | |
598 | * NL80211_CMD_ASSOCIATE events | |
636a5d36 JM |
599 | * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) |
600 | * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, | |
601 | * represented as a u32 | |
602 | * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and | |
603 | * %NL80211_CMD_DISASSOCIATE, u16 | |
6039f6d2 | 604 | * |
a3b8b056 JM |
605 | * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as |
606 | * a u32 | |
607 | * | |
6bad8766 LR |
608 | * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change |
609 | * due to considerations from a beacon hint. This attribute reflects | |
610 | * the state of the channel _before_ the beacon hint processing. This | |
611 | * attributes consists of a nested attribute containing | |
612 | * NL80211_FREQUENCY_ATTR_* | |
613 | * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change | |
614 | * due to considerations from a beacon hint. This attribute reflects | |
615 | * the state of the channel _after_ the beacon hint processing. This | |
616 | * attributes consists of a nested attribute containing | |
617 | * NL80211_FREQUENCY_ATTR_* | |
618 | * | |
25e47c18 JB |
619 | * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported |
620 | * cipher suites | |
621 | * | |
04a773ad JB |
622 | * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look |
623 | * for other networks on different channels | |
624 | * | |
1965c853 JM |
625 | * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this |
626 | * is used, e.g., with %NL80211_CMD_AUTHENTICATE event | |
627 | * | |
dc6382ce JM |
628 | * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is |
629 | * used for the association (&enum nl80211_mfp, represented as a u32); | |
630 | * this attribute can be used | |
631 | * with %NL80211_CMD_ASSOCIATE request | |
632 | * | |
eccb8e8f JB |
633 | * @NL80211_ATTR_STA_FLAGS2: Attribute containing a |
634 | * &struct nl80211_sta_flag_update. | |
635 | * | |
3f77316c JM |
636 | * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls |
637 | * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in | |
638 | * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE | |
639 | * request, the driver will assume that the port is unauthorized until | |
640 | * authorized by user space. Otherwise, port is marked authorized by | |
641 | * default in station mode. | |
642 | * | |
aff89a9b JB |
643 | * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. |
644 | * We recommend using nested, driver-specific attributes within this. | |
645 | * | |
b23aa676 SO |
646 | * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT |
647 | * event was due to the AP disconnecting the station, and not due to | |
648 | * a local disconnect request. | |
649 | * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT | |
650 | * event (u16) | |
651 | * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating | |
652 | * that protected APs should be used. | |
653 | * | |
654 | * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to | |
655 | * indicate which unicast key ciphers will be used with the connection | |
656 | * (an array of u32). | |
657 | * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate | |
658 | * which group key cipher will be used with the connection (a u32). | |
659 | * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate | |
660 | * which WPA version(s) the AP we want to associate with is using | |
661 | * (a u32 with flags from &enum nl80211_wpa_versions). | |
662 | * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate | |
663 | * which key management algorithm(s) to use (an array of u32). | |
664 | * | |
665 | * @NL80211_ATTR_REQ_IE: (Re)association request information elements as | |
666 | * sent out by the card, for ROAM and successful CONNECT events. | |
667 | * @NL80211_ATTR_RESP_IE: (Re)association response information elements as | |
668 | * sent by peer, for ROAM and successful CONNECT events. | |
669 | * | |
3e5d7649 JB |
670 | * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE |
671 | * commands to specify using a reassociate frame | |
672 | * | |
b9454e83 JB |
673 | * @NL80211_ATTR_KEY: key information in a nested attribute with |
674 | * %NL80211_KEY_* sub-attributes | |
fffd0934 JB |
675 | * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() |
676 | * and join_ibss(), key information is in a nested attribute each | |
677 | * with %NL80211_KEY_* sub-attributes | |
b9454e83 | 678 | * |
463d0183 JB |
679 | * @NL80211_ATTR_PID: Process ID of a network namespace. |
680 | * | |
f5ea9120 JB |
681 | * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for |
682 | * dumps. This number increases whenever the object list being | |
683 | * dumped changes, and as such userspace can verify that it has | |
684 | * obtained a complete and consistent snapshot by verifying that | |
685 | * all dump messages contain the same generation number. If it | |
686 | * changed then the list changed and the dump should be repeated | |
687 | * completely from scratch. | |
688 | * | |
8b787643 FF |
689 | * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface |
690 | * | |
61fa713c HS |
691 | * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of |
692 | * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute | |
693 | * containing info as possible, see &enum survey_info. | |
694 | * | |
67fbb16b SO |
695 | * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. |
696 | * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can | |
697 | * cache, a wiphy attribute. | |
698 | * | |
9588bbd5 JM |
699 | * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. |
700 | * | |
701 | * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. | |
702 | * | |
13ae75b1 JM |
703 | * @NL80211_ATTR_TX_RATES: Nested set of attributes |
704 | * (enum nl80211_tx_rate_attributes) describing TX rates per band. The | |
705 | * enum nl80211_band value is used as the index (nla_type() of the nested | |
706 | * data. If a band is not included, it will be configured to allow all | |
707 | * rates based on negotiated supported rates information. This attribute | |
708 | * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. | |
709 | * | |
026331c4 JM |
710 | * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain |
711 | * at least one byte, currently used with @NL80211_CMD_REGISTER_ACTION. | |
712 | * | |
713 | * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was | |
714 | * acknowledged by the recipient. | |
715 | * | |
d6dc1a38 JO |
716 | * @NL80211_ATTR_CQM: connection quality monitor configuration in a |
717 | * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. | |
718 | * | |
d5cdfacb JM |
719 | * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command |
720 | * is requesting a local authentication/association state change without | |
721 | * invoking actual management frame exchange. This can be used with | |
722 | * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, | |
723 | * NL80211_CMD_DISASSOCIATE. | |
724 | * | |
fd8aaaf3 FF |
725 | * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations |
726 | * connected to this BSS. | |
727 | * | |
98d2ff8b JO |
728 | * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See |
729 | * &enum nl80211_tx_power_setting for possible values. | |
730 | * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. | |
731 | * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING | |
732 | * for non-automatic settings. | |
733 | * | |
55682965 JB |
734 | * @NL80211_ATTR_MAX: highest attribute number currently defined |
735 | * @__NL80211_ATTR_AFTER_LAST: internal use | |
736 | */ | |
737 | enum nl80211_attrs { | |
738 | /* don't change the order or add anything inbetween, this is ABI! */ | |
739 | NL80211_ATTR_UNSPEC, | |
740 | ||
741 | NL80211_ATTR_WIPHY, | |
742 | NL80211_ATTR_WIPHY_NAME, | |
743 | ||
744 | NL80211_ATTR_IFINDEX, | |
745 | NL80211_ATTR_IFNAME, | |
746 | NL80211_ATTR_IFTYPE, | |
747 | ||
41ade00f JB |
748 | NL80211_ATTR_MAC, |
749 | ||
750 | NL80211_ATTR_KEY_DATA, | |
751 | NL80211_ATTR_KEY_IDX, | |
752 | NL80211_ATTR_KEY_CIPHER, | |
753 | NL80211_ATTR_KEY_SEQ, | |
754 | NL80211_ATTR_KEY_DEFAULT, | |
755 | ||
ed1b6cc7 JB |
756 | NL80211_ATTR_BEACON_INTERVAL, |
757 | NL80211_ATTR_DTIM_PERIOD, | |
758 | NL80211_ATTR_BEACON_HEAD, | |
759 | NL80211_ATTR_BEACON_TAIL, | |
760 | ||
5727ef1b JB |
761 | NL80211_ATTR_STA_AID, |
762 | NL80211_ATTR_STA_FLAGS, | |
763 | NL80211_ATTR_STA_LISTEN_INTERVAL, | |
764 | NL80211_ATTR_STA_SUPPORTED_RATES, | |
765 | NL80211_ATTR_STA_VLAN, | |
2ec600d6 | 766 | NL80211_ATTR_STA_INFO, |
5727ef1b | 767 | |
ee688b00 JB |
768 | NL80211_ATTR_WIPHY_BANDS, |
769 | ||
66f7ac50 MW |
770 | NL80211_ATTR_MNTR_FLAGS, |
771 | ||
2ec600d6 LCC |
772 | NL80211_ATTR_MESH_ID, |
773 | NL80211_ATTR_STA_PLINK_ACTION, | |
774 | NL80211_ATTR_MPATH_NEXT_HOP, | |
775 | NL80211_ATTR_MPATH_INFO, | |
776 | ||
9f1ba906 JM |
777 | NL80211_ATTR_BSS_CTS_PROT, |
778 | NL80211_ATTR_BSS_SHORT_PREAMBLE, | |
779 | NL80211_ATTR_BSS_SHORT_SLOT_TIME, | |
780 | ||
36aedc90 JM |
781 | NL80211_ATTR_HT_CAPABILITY, |
782 | ||
f59ac048 LR |
783 | NL80211_ATTR_SUPPORTED_IFTYPES, |
784 | ||
b2e1b302 LR |
785 | NL80211_ATTR_REG_ALPHA2, |
786 | NL80211_ATTR_REG_RULES, | |
787 | ||
93da9cc1 | 788 | NL80211_ATTR_MESH_PARAMS, |
789 | ||
90c97a04 JM |
790 | NL80211_ATTR_BSS_BASIC_RATES, |
791 | ||
31888487 | 792 | NL80211_ATTR_WIPHY_TXQ_PARAMS, |
72bdcf34 | 793 | NL80211_ATTR_WIPHY_FREQ, |
094d05dc | 794 | NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
31888487 | 795 | |
3cfcf6ac JM |
796 | NL80211_ATTR_KEY_DEFAULT_MGMT, |
797 | ||
9aed3cc1 JM |
798 | NL80211_ATTR_MGMT_SUBTYPE, |
799 | NL80211_ATTR_IE, | |
800 | ||
2a519311 JB |
801 | NL80211_ATTR_MAX_NUM_SCAN_SSIDS, |
802 | ||
803 | NL80211_ATTR_SCAN_FREQUENCIES, | |
804 | NL80211_ATTR_SCAN_SSIDS, | |
f5ea9120 | 805 | NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ |
2a519311 JB |
806 | NL80211_ATTR_BSS, |
807 | ||
73d54c9e LR |
808 | NL80211_ATTR_REG_INITIATOR, |
809 | NL80211_ATTR_REG_TYPE, | |
810 | ||
8fdc621d JB |
811 | NL80211_ATTR_SUPPORTED_COMMANDS, |
812 | ||
6039f6d2 | 813 | NL80211_ATTR_FRAME, |
636a5d36 JM |
814 | NL80211_ATTR_SSID, |
815 | NL80211_ATTR_AUTH_TYPE, | |
816 | NL80211_ATTR_REASON_CODE, | |
6039f6d2 | 817 | |
a3b8b056 JM |
818 | NL80211_ATTR_KEY_TYPE, |
819 | ||
18a83659 | 820 | NL80211_ATTR_MAX_SCAN_IE_LEN, |
25e47c18 | 821 | NL80211_ATTR_CIPHER_SUITES, |
18a83659 | 822 | |
6bad8766 LR |
823 | NL80211_ATTR_FREQ_BEFORE, |
824 | NL80211_ATTR_FREQ_AFTER, | |
04a773ad JB |
825 | |
826 | NL80211_ATTR_FREQ_FIXED, | |
827 | ||
b9a5f8ca JM |
828 | |
829 | NL80211_ATTR_WIPHY_RETRY_SHORT, | |
830 | NL80211_ATTR_WIPHY_RETRY_LONG, | |
831 | NL80211_ATTR_WIPHY_FRAG_THRESHOLD, | |
832 | NL80211_ATTR_WIPHY_RTS_THRESHOLD, | |
833 | ||
1965c853 JM |
834 | NL80211_ATTR_TIMED_OUT, |
835 | ||
dc6382ce JM |
836 | NL80211_ATTR_USE_MFP, |
837 | ||
eccb8e8f JB |
838 | NL80211_ATTR_STA_FLAGS2, |
839 | ||
3f77316c JM |
840 | NL80211_ATTR_CONTROL_PORT, |
841 | ||
aff89a9b JB |
842 | NL80211_ATTR_TESTDATA, |
843 | ||
b23aa676 SO |
844 | NL80211_ATTR_PRIVACY, |
845 | ||
846 | NL80211_ATTR_DISCONNECTED_BY_AP, | |
847 | NL80211_ATTR_STATUS_CODE, | |
848 | ||
849 | NL80211_ATTR_CIPHER_SUITES_PAIRWISE, | |
850 | NL80211_ATTR_CIPHER_SUITE_GROUP, | |
851 | NL80211_ATTR_WPA_VERSIONS, | |
852 | NL80211_ATTR_AKM_SUITES, | |
853 | ||
854 | NL80211_ATTR_REQ_IE, | |
855 | NL80211_ATTR_RESP_IE, | |
856 | ||
3e5d7649 JB |
857 | NL80211_ATTR_PREV_BSSID, |
858 | ||
b9454e83 | 859 | NL80211_ATTR_KEY, |
fffd0934 | 860 | NL80211_ATTR_KEYS, |
b9454e83 | 861 | |
463d0183 JB |
862 | NL80211_ATTR_PID, |
863 | ||
8b787643 FF |
864 | NL80211_ATTR_4ADDR, |
865 | ||
61fa713c HS |
866 | NL80211_ATTR_SURVEY_INFO, |
867 | ||
67fbb16b SO |
868 | NL80211_ATTR_PMKID, |
869 | NL80211_ATTR_MAX_NUM_PMKIDS, | |
870 | ||
9588bbd5 JM |
871 | NL80211_ATTR_DURATION, |
872 | ||
873 | NL80211_ATTR_COOKIE, | |
874 | ||
81077e82 LT |
875 | NL80211_ATTR_WIPHY_COVERAGE_CLASS, |
876 | ||
13ae75b1 JM |
877 | NL80211_ATTR_TX_RATES, |
878 | ||
026331c4 JM |
879 | NL80211_ATTR_FRAME_MATCH, |
880 | ||
881 | NL80211_ATTR_ACK, | |
882 | ||
ffb9eb3d KV |
883 | NL80211_ATTR_PS_STATE, |
884 | ||
d6dc1a38 JO |
885 | NL80211_ATTR_CQM, |
886 | ||
d5cdfacb JM |
887 | NL80211_ATTR_LOCAL_STATE_CHANGE, |
888 | ||
fd8aaaf3 FF |
889 | NL80211_ATTR_AP_ISOLATE, |
890 | ||
98d2ff8b JO |
891 | NL80211_ATTR_WIPHY_TX_POWER_SETTING, |
892 | NL80211_ATTR_WIPHY_TX_POWER_LEVEL, | |
893 | ||
564d9bdd MB |
894 | /* add attributes here, update the policy in nl80211.c */ |
895 | ||
55682965 JB |
896 | __NL80211_ATTR_AFTER_LAST, |
897 | NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 | |
898 | }; | |
899 | ||
f5ea9120 JB |
900 | /* source-level API compatibility */ |
901 | #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION | |
902 | ||
36aedc90 JM |
903 | /* |
904 | * Allow user space programs to use #ifdef on new attributes by defining them | |
905 | * here | |
906 | */ | |
b23aa676 | 907 | #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT |
36aedc90 | 908 | #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY |
90c97a04 | 909 | #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
31888487 | 910 | #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
72bdcf34 | 911 | #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ |
d03415e6 | 912 | #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE |
9aed3cc1 JM |
913 | #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE |
914 | #define NL80211_ATTR_IE NL80211_ATTR_IE | |
73d54c9e LR |
915 | #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR |
916 | #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE | |
6039f6d2 | 917 | #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME |
636a5d36 JM |
918 | #define NL80211_ATTR_SSID NL80211_ATTR_SSID |
919 | #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE | |
920 | #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE | |
b23aa676 SO |
921 | #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE |
922 | #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP | |
923 | #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS | |
924 | #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES | |
b9454e83 | 925 | #define NL80211_ATTR_KEY NL80211_ATTR_KEY |
fffd0934 | 926 | #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS |
36aedc90 | 927 | |
ffd7891d | 928 | #define NL80211_MAX_SUPP_RATES 32 |
b2e1b302 | 929 | #define NL80211_MAX_SUPP_REG_RULES 32 |
ffd7891d LR |
930 | #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
931 | #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 | |
932 | #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 | |
36aedc90 | 933 | #define NL80211_HT_CAPABILITY_LEN 26 |
5727ef1b | 934 | |
b23aa676 SO |
935 | #define NL80211_MAX_NR_CIPHER_SUITES 5 |
936 | #define NL80211_MAX_NR_AKM_SUITES 2 | |
937 | ||
704232c2 JB |
938 | /** |
939 | * enum nl80211_iftype - (virtual) interface types | |
55682965 | 940 | * |
704232c2 JB |
941 | * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
942 | * @NL80211_IFTYPE_ADHOC: independent BSS member | |
943 | * @NL80211_IFTYPE_STATION: managed BSS member | |
944 | * @NL80211_IFTYPE_AP: access point | |
945 | * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points | |
946 | * @NL80211_IFTYPE_WDS: wireless distribution interface | |
947 | * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames | |
2ec600d6 | 948 | * @NL80211_IFTYPE_MESH_POINT: mesh point |
55682965 | 949 | * @NL80211_IFTYPE_MAX: highest interface type number currently defined |
704232c2 JB |
950 | * @__NL80211_IFTYPE_AFTER_LAST: internal use |
951 | * | |
55682965 | 952 | * These values are used with the %NL80211_ATTR_IFTYPE |
704232c2 JB |
953 | * to set the type of an interface. |
954 | * | |
955 | */ | |
956 | enum nl80211_iftype { | |
957 | NL80211_IFTYPE_UNSPECIFIED, | |
958 | NL80211_IFTYPE_ADHOC, | |
959 | NL80211_IFTYPE_STATION, | |
960 | NL80211_IFTYPE_AP, | |
961 | NL80211_IFTYPE_AP_VLAN, | |
962 | NL80211_IFTYPE_WDS, | |
963 | NL80211_IFTYPE_MONITOR, | |
2ec600d6 | 964 | NL80211_IFTYPE_MESH_POINT, |
704232c2 JB |
965 | |
966 | /* keep last */ | |
55682965 JB |
967 | __NL80211_IFTYPE_AFTER_LAST, |
968 | NL80211_IFTYPE_MAX = __NL80211_IFTYPE_AFTER_LAST - 1 | |
704232c2 | 969 | }; |
704232c2 | 970 | |
5727ef1b JB |
971 | /** |
972 | * enum nl80211_sta_flags - station flags | |
973 | * | |
974 | * Station flags. When a station is added to an AP interface, it is | |
975 | * assumed to be already associated (and hence authenticated.) | |
976 | * | |
977 | * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) | |
978 | * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames | |
979 | * with short barker preamble | |
980 | * @NL80211_STA_FLAG_WME: station is WME/QoS capable | |
5394af4d | 981 | * @NL80211_STA_FLAG_MFP: station uses management frame protection |
5727ef1b JB |
982 | */ |
983 | enum nl80211_sta_flags { | |
984 | __NL80211_STA_FLAG_INVALID, | |
985 | NL80211_STA_FLAG_AUTHORIZED, | |
986 | NL80211_STA_FLAG_SHORT_PREAMBLE, | |
987 | NL80211_STA_FLAG_WME, | |
5394af4d | 988 | NL80211_STA_FLAG_MFP, |
5727ef1b JB |
989 | |
990 | /* keep last */ | |
991 | __NL80211_STA_FLAG_AFTER_LAST, | |
992 | NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 | |
993 | }; | |
994 | ||
eccb8e8f JB |
995 | /** |
996 | * struct nl80211_sta_flag_update - station flags mask/set | |
997 | * @mask: mask of station flags to set | |
998 | * @set: which values to set them to | |
999 | * | |
1000 | * Both mask and set contain bits as per &enum nl80211_sta_flags. | |
1001 | */ | |
1002 | struct nl80211_sta_flag_update { | |
1003 | __u32 mask; | |
1004 | __u32 set; | |
1005 | } __attribute__((packed)); | |
1006 | ||
420e7fab HR |
1007 | /** |
1008 | * enum nl80211_rate_info - bitrate information | |
1009 | * | |
1010 | * These attribute types are used with %NL80211_STA_INFO_TXRATE | |
1011 | * when getting information about the bitrate of a station. | |
1012 | * | |
1013 | * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved | |
1014 | * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) | |
1015 | * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) | |
1016 | * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate | |
1017 | * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval | |
1018 | * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined | |
1019 | * @__NL80211_RATE_INFO_AFTER_LAST: internal use | |
1020 | */ | |
1021 | enum nl80211_rate_info { | |
1022 | __NL80211_RATE_INFO_INVALID, | |
1023 | NL80211_RATE_INFO_BITRATE, | |
1024 | NL80211_RATE_INFO_MCS, | |
1025 | NL80211_RATE_INFO_40_MHZ_WIDTH, | |
1026 | NL80211_RATE_INFO_SHORT_GI, | |
1027 | ||
1028 | /* keep last */ | |
1029 | __NL80211_RATE_INFO_AFTER_LAST, | |
1030 | NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 | |
1031 | }; | |
1032 | ||
fd5b74dc | 1033 | /** |
2ec600d6 | 1034 | * enum nl80211_sta_info - station information |
fd5b74dc | 1035 | * |
2ec600d6 | 1036 | * These attribute types are used with %NL80211_ATTR_STA_INFO |
fd5b74dc JB |
1037 | * when getting information about a station. |
1038 | * | |
2ec600d6 LCC |
1039 | * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
1040 | * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) | |
1041 | * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) | |
1042 | * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) | |
1043 | * @__NL80211_STA_INFO_AFTER_LAST: internal | |
1044 | * @NL80211_STA_INFO_MAX: highest possible station info attribute | |
420e7fab HR |
1045 | * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) |
1046 | * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute | |
1047 | * containing info as possible, see &enum nl80211_sta_info_txrate. | |
98c8a60a JM |
1048 | * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) |
1049 | * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this | |
1050 | * station) | |
2ec600d6 LCC |
1051 | */ |
1052 | enum nl80211_sta_info { | |
1053 | __NL80211_STA_INFO_INVALID, | |
1054 | NL80211_STA_INFO_INACTIVE_TIME, | |
1055 | NL80211_STA_INFO_RX_BYTES, | |
1056 | NL80211_STA_INFO_TX_BYTES, | |
1057 | NL80211_STA_INFO_LLID, | |
1058 | NL80211_STA_INFO_PLID, | |
1059 | NL80211_STA_INFO_PLINK_STATE, | |
420e7fab HR |
1060 | NL80211_STA_INFO_SIGNAL, |
1061 | NL80211_STA_INFO_TX_BITRATE, | |
98c8a60a JM |
1062 | NL80211_STA_INFO_RX_PACKETS, |
1063 | NL80211_STA_INFO_TX_PACKETS, | |
2ec600d6 LCC |
1064 | |
1065 | /* keep last */ | |
1066 | __NL80211_STA_INFO_AFTER_LAST, | |
1067 | NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 | |
1068 | }; | |
1069 | ||
1070 | /** | |
1071 | * enum nl80211_mpath_flags - nl80211 mesh path flags | |
1072 | * | |
1073 | * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active | |
1074 | * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running | |
d19b3bf6 | 1075 | * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN |
2ec600d6 LCC |
1076 | * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set |
1077 | * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded | |
1078 | */ | |
1079 | enum nl80211_mpath_flags { | |
1080 | NL80211_MPATH_FLAG_ACTIVE = 1<<0, | |
1081 | NL80211_MPATH_FLAG_RESOLVING = 1<<1, | |
d19b3bf6 | 1082 | NL80211_MPATH_FLAG_SN_VALID = 1<<2, |
2ec600d6 LCC |
1083 | NL80211_MPATH_FLAG_FIXED = 1<<3, |
1084 | NL80211_MPATH_FLAG_RESOLVED = 1<<4, | |
1085 | }; | |
1086 | ||
1087 | /** | |
1088 | * enum nl80211_mpath_info - mesh path information | |
1089 | * | |
1090 | * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting | |
1091 | * information about a mesh path. | |
1092 | * | |
1093 | * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved | |
1094 | * @NL80211_ATTR_MPATH_FRAME_QLEN: number of queued frames for this destination | |
d19b3bf6 | 1095 | * @NL80211_ATTR_MPATH_SN: destination sequence number |
2ec600d6 LCC |
1096 | * @NL80211_ATTR_MPATH_METRIC: metric (cost) of this mesh path |
1097 | * @NL80211_ATTR_MPATH_EXPTIME: expiration time for the path, in msec from now | |
1098 | * @NL80211_ATTR_MPATH_FLAGS: mesh path flags, enumerated in | |
1099 | * &enum nl80211_mpath_flags; | |
1100 | * @NL80211_ATTR_MPATH_DISCOVERY_TIMEOUT: total path discovery timeout, in msec | |
1101 | * @NL80211_ATTR_MPATH_DISCOVERY_RETRIES: mesh path discovery retries | |
fd5b74dc | 1102 | */ |
2ec600d6 LCC |
1103 | enum nl80211_mpath_info { |
1104 | __NL80211_MPATH_INFO_INVALID, | |
1105 | NL80211_MPATH_INFO_FRAME_QLEN, | |
d19b3bf6 | 1106 | NL80211_MPATH_INFO_SN, |
2ec600d6 LCC |
1107 | NL80211_MPATH_INFO_METRIC, |
1108 | NL80211_MPATH_INFO_EXPTIME, | |
1109 | NL80211_MPATH_INFO_FLAGS, | |
1110 | NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, | |
1111 | NL80211_MPATH_INFO_DISCOVERY_RETRIES, | |
fd5b74dc JB |
1112 | |
1113 | /* keep last */ | |
2ec600d6 LCC |
1114 | __NL80211_MPATH_INFO_AFTER_LAST, |
1115 | NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 | |
fd5b74dc JB |
1116 | }; |
1117 | ||
ee688b00 JB |
1118 | /** |
1119 | * enum nl80211_band_attr - band attributes | |
1120 | * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved | |
1121 | * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, | |
1122 | * an array of nested frequency attributes | |
1123 | * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, | |
1124 | * an array of nested bitrate attributes | |
d51626df JB |
1125 | * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
1126 | * defined in 802.11n | |
1127 | * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE | |
1128 | * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n | |
1129 | * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n | |
ee688b00 JB |
1130 | */ |
1131 | enum nl80211_band_attr { | |
1132 | __NL80211_BAND_ATTR_INVALID, | |
1133 | NL80211_BAND_ATTR_FREQS, | |
1134 | NL80211_BAND_ATTR_RATES, | |
1135 | ||
d51626df JB |
1136 | NL80211_BAND_ATTR_HT_MCS_SET, |
1137 | NL80211_BAND_ATTR_HT_CAPA, | |
1138 | NL80211_BAND_ATTR_HT_AMPDU_FACTOR, | |
1139 | NL80211_BAND_ATTR_HT_AMPDU_DENSITY, | |
1140 | ||
ee688b00 JB |
1141 | /* keep last */ |
1142 | __NL80211_BAND_ATTR_AFTER_LAST, | |
1143 | NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 | |
1144 | }; | |
1145 | ||
d51626df JB |
1146 | #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
1147 | ||
ee688b00 JB |
1148 | /** |
1149 | * enum nl80211_frequency_attr - frequency attributes | |
1150 | * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz | |
1151 | * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current | |
1152 | * regulatory domain. | |
1153 | * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is | |
1154 | * permitted on this channel in current regulatory domain. | |
1155 | * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted | |
1156 | * on this channel in current regulatory domain. | |
1157 | * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory | |
1158 | * on this channel in current regulatory domain. | |
bf8c1ac6 JM |
1159 | * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
1160 | * (100 * dBm). | |
ee688b00 JB |
1161 | */ |
1162 | enum nl80211_frequency_attr { | |
1163 | __NL80211_FREQUENCY_ATTR_INVALID, | |
1164 | NL80211_FREQUENCY_ATTR_FREQ, | |
1165 | NL80211_FREQUENCY_ATTR_DISABLED, | |
1166 | NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, | |
1167 | NL80211_FREQUENCY_ATTR_NO_IBSS, | |
1168 | NL80211_FREQUENCY_ATTR_RADAR, | |
e2f367f2 | 1169 | NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
ee688b00 JB |
1170 | |
1171 | /* keep last */ | |
1172 | __NL80211_FREQUENCY_ATTR_AFTER_LAST, | |
1173 | NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 | |
1174 | }; | |
1175 | ||
e2f367f2 JM |
1176 | #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
1177 | ||
ee688b00 JB |
1178 | /** |
1179 | * enum nl80211_bitrate_attr - bitrate attributes | |
1180 | * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps | |
1181 | * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported | |
1182 | * in 2.4 GHz band. | |
1183 | */ | |
1184 | enum nl80211_bitrate_attr { | |
1185 | __NL80211_BITRATE_ATTR_INVALID, | |
1186 | NL80211_BITRATE_ATTR_RATE, | |
1187 | NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, | |
1188 | ||
1189 | /* keep last */ | |
1190 | __NL80211_BITRATE_ATTR_AFTER_LAST, | |
1191 | NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 | |
1192 | }; | |
1193 | ||
7db90f4a LR |
1194 | /** |
1195 | * enum nl80211_initiator - Indicates the initiator of a reg domain request | |
1196 | * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world | |
1197 | * regulatory domain. | |
1198 | * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the | |
1199 | * regulatory domain. | |
1200 | * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the | |
1201 | * wireless core it thinks its knows the regulatory domain we should be in. | |
1202 | * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an | |
1203 | * 802.11 country information element with regulatory information it | |
1204 | * thinks we should consider. | |
1205 | */ | |
1206 | enum nl80211_reg_initiator { | |
1207 | NL80211_REGDOM_SET_BY_CORE, | |
1208 | NL80211_REGDOM_SET_BY_USER, | |
1209 | NL80211_REGDOM_SET_BY_DRIVER, | |
1210 | NL80211_REGDOM_SET_BY_COUNTRY_IE, | |
1211 | }; | |
1212 | ||
73d54c9e LR |
1213 | /** |
1214 | * enum nl80211_reg_type - specifies the type of regulatory domain | |
1215 | * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains | |
1216 | * to a specific country. When this is set you can count on the | |
1217 | * ISO / IEC 3166 alpha2 country code being valid. | |
1218 | * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory | |
1219 | * domain. | |
1220 | * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom | |
1221 | * driver specific world regulatory domain. These do not apply system-wide | |
1222 | * and are only applicable to the individual devices which have requested | |
1223 | * them to be applied. | |
1224 | * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product | |
1225 | * of an intersection between two regulatory domains -- the previously | |
1226 | * set regulatory domain on the system and the last accepted regulatory | |
1227 | * domain request to be processed. | |
1228 | */ | |
1229 | enum nl80211_reg_type { | |
1230 | NL80211_REGDOM_TYPE_COUNTRY, | |
1231 | NL80211_REGDOM_TYPE_WORLD, | |
1232 | NL80211_REGDOM_TYPE_CUSTOM_WORLD, | |
1233 | NL80211_REGDOM_TYPE_INTERSECTION, | |
1234 | }; | |
1235 | ||
b2e1b302 LR |
1236 | /** |
1237 | * enum nl80211_reg_rule_attr - regulatory rule attributes | |
1238 | * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional | |
1239 | * considerations for a given frequency range. These are the | |
1240 | * &enum nl80211_reg_rule_flags. | |
1241 | * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory | |
1242 | * rule in KHz. This is not a center of frequency but an actual regulatory | |
1243 | * band edge. | |
1244 | * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule | |
1245 | * in KHz. This is not a center a frequency but an actual regulatory | |
1246 | * band edge. | |
1247 | * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this | |
1248 | * frequency range, in KHz. | |
1249 | * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain | |
1250 | * for a given frequency range. The value is in mBi (100 * dBi). | |
1251 | * If you don't have one then don't send this. | |
1252 | * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for | |
1253 | * a given frequency range. The value is in mBm (100 * dBm). | |
1254 | */ | |
1255 | enum nl80211_reg_rule_attr { | |
1256 | __NL80211_REG_RULE_ATTR_INVALID, | |
1257 | NL80211_ATTR_REG_RULE_FLAGS, | |
1258 | ||
1259 | NL80211_ATTR_FREQ_RANGE_START, | |
1260 | NL80211_ATTR_FREQ_RANGE_END, | |
1261 | NL80211_ATTR_FREQ_RANGE_MAX_BW, | |
1262 | ||
1263 | NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, | |
1264 | NL80211_ATTR_POWER_RULE_MAX_EIRP, | |
1265 | ||
1266 | /* keep last */ | |
1267 | __NL80211_REG_RULE_ATTR_AFTER_LAST, | |
1268 | NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 | |
1269 | }; | |
1270 | ||
1271 | /** | |
1272 | * enum nl80211_reg_rule_flags - regulatory rule flags | |
1273 | * | |
1274 | * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed | |
1275 | * @NL80211_RRF_NO_CCK: CCK modulation not allowed | |
1276 | * @NL80211_RRF_NO_INDOOR: indoor operation not allowed | |
1277 | * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed | |
1278 | * @NL80211_RRF_DFS: DFS support is required to be used | |
1279 | * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links | |
1280 | * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links | |
1281 | * @NL80211_RRF_PASSIVE_SCAN: passive scan is required | |
1282 | * @NL80211_RRF_NO_IBSS: no IBSS is allowed | |
1283 | */ | |
1284 | enum nl80211_reg_rule_flags { | |
1285 | NL80211_RRF_NO_OFDM = 1<<0, | |
1286 | NL80211_RRF_NO_CCK = 1<<1, | |
1287 | NL80211_RRF_NO_INDOOR = 1<<2, | |
1288 | NL80211_RRF_NO_OUTDOOR = 1<<3, | |
1289 | NL80211_RRF_DFS = 1<<4, | |
1290 | NL80211_RRF_PTP_ONLY = 1<<5, | |
1291 | NL80211_RRF_PTMP_ONLY = 1<<6, | |
1292 | NL80211_RRF_PASSIVE_SCAN = 1<<7, | |
1293 | NL80211_RRF_NO_IBSS = 1<<8, | |
1294 | }; | |
1295 | ||
61fa713c HS |
1296 | /** |
1297 | * enum nl80211_survey_info - survey information | |
1298 | * | |
1299 | * These attribute types are used with %NL80211_ATTR_SURVEY_INFO | |
1300 | * when getting information about a survey. | |
1301 | * | |
1302 | * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved | |
1303 | * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel | |
1304 | * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) | |
1305 | */ | |
1306 | enum nl80211_survey_info { | |
1307 | __NL80211_SURVEY_INFO_INVALID, | |
1308 | NL80211_SURVEY_INFO_FREQUENCY, | |
1309 | NL80211_SURVEY_INFO_NOISE, | |
1310 | ||
1311 | /* keep last */ | |
1312 | __NL80211_SURVEY_INFO_AFTER_LAST, | |
1313 | NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 | |
1314 | }; | |
1315 | ||
66f7ac50 MW |
1316 | /** |
1317 | * enum nl80211_mntr_flags - monitor configuration flags | |
1318 | * | |
1319 | * Monitor configuration flags. | |
1320 | * | |
1321 | * @__NL80211_MNTR_FLAG_INVALID: reserved | |
1322 | * | |
1323 | * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS | |
1324 | * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP | |
1325 | * @NL80211_MNTR_FLAG_CONTROL: pass control frames | |
1326 | * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering | |
1327 | * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. | |
1328 | * overrides all other flags. | |
1329 | * | |
1330 | * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use | |
1331 | * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag | |
1332 | */ | |
1333 | enum nl80211_mntr_flags { | |
1334 | __NL80211_MNTR_FLAG_INVALID, | |
1335 | NL80211_MNTR_FLAG_FCSFAIL, | |
1336 | NL80211_MNTR_FLAG_PLCPFAIL, | |
1337 | NL80211_MNTR_FLAG_CONTROL, | |
1338 | NL80211_MNTR_FLAG_OTHER_BSS, | |
1339 | NL80211_MNTR_FLAG_COOK_FRAMES, | |
1340 | ||
1341 | /* keep last */ | |
1342 | __NL80211_MNTR_FLAG_AFTER_LAST, | |
1343 | NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 | |
1344 | }; | |
1345 | ||
93da9cc1 | 1346 | /** |
1347 | * enum nl80211_meshconf_params - mesh configuration parameters | |
1348 | * | |
1349 | * Mesh configuration parameters | |
1350 | * | |
1351 | * @__NL80211_MESHCONF_INVALID: internal use | |
1352 | * | |
1353 | * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in | |
1354 | * millisecond units, used by the Peer Link Open message | |
1355 | * | |
1356 | * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in | |
1357 | * millisecond units, used by the peer link management to close a peer link | |
1358 | * | |
1359 | * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in | |
1360 | * millisecond units | |
1361 | * | |
1362 | * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed | |
1363 | * on this mesh interface | |
1364 | * | |
1365 | * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link | |
1366 | * open retries that can be sent to establish a new peer link instance in a | |
1367 | * mesh | |
1368 | * | |
1369 | * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh | |
1370 | * point. | |
1371 | * | |
1372 | * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically | |
1373 | * open peer links when we detect compatible mesh peers. | |
1374 | * | |
1375 | * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames | |
1376 | * containing a PREQ that an MP can send to a particular destination (path | |
1377 | * target) | |
1378 | * | |
1379 | * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths | |
1380 | * (in milliseconds) | |
1381 | * | |
1382 | * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait | |
1383 | * until giving up on a path discovery (in milliseconds) | |
1384 | * | |
1385 | * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh | |
1386 | * points receiving a PREQ shall consider the forwarding information from the | |
1387 | * root to be valid. (TU = time unit) | |
1388 | * | |
1389 | * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in | |
1390 | * TUs) during which an MP can send only one action frame containing a PREQ | |
1391 | * reference element | |
1392 | * | |
1393 | * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) | |
1394 | * that it takes for an HWMP information element to propagate across the mesh | |
1395 | * | |
63c5723b RP |
1396 | * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not |
1397 | * | |
93da9cc1 | 1398 | * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute |
1399 | * | |
1400 | * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use | |
1401 | */ | |
1402 | enum nl80211_meshconf_params { | |
1403 | __NL80211_MESHCONF_INVALID, | |
1404 | NL80211_MESHCONF_RETRY_TIMEOUT, | |
1405 | NL80211_MESHCONF_CONFIRM_TIMEOUT, | |
1406 | NL80211_MESHCONF_HOLDING_TIMEOUT, | |
1407 | NL80211_MESHCONF_MAX_PEER_LINKS, | |
1408 | NL80211_MESHCONF_MAX_RETRIES, | |
1409 | NL80211_MESHCONF_TTL, | |
1410 | NL80211_MESHCONF_AUTO_OPEN_PLINKS, | |
1411 | NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, | |
1412 | NL80211_MESHCONF_PATH_REFRESH_TIME, | |
1413 | NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, | |
1414 | NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, | |
1415 | NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, | |
1416 | NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | |
63c5723b | 1417 | NL80211_MESHCONF_HWMP_ROOTMODE, |
93da9cc1 | 1418 | |
1419 | /* keep last */ | |
1420 | __NL80211_MESHCONF_ATTR_AFTER_LAST, | |
1421 | NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 | |
1422 | }; | |
1423 | ||
31888487 JM |
1424 | /** |
1425 | * enum nl80211_txq_attr - TX queue parameter attributes | |
1426 | * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved | |
1427 | * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) | |
1428 | * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning | |
1429 | * disabled | |
1430 | * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form | |
1431 | * 2^n-1 in the range 1..32767] | |
1432 | * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form | |
1433 | * 2^n-1 in the range 1..32767] | |
1434 | * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] | |
1435 | * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal | |
1436 | * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number | |
1437 | */ | |
1438 | enum nl80211_txq_attr { | |
1439 | __NL80211_TXQ_ATTR_INVALID, | |
1440 | NL80211_TXQ_ATTR_QUEUE, | |
1441 | NL80211_TXQ_ATTR_TXOP, | |
1442 | NL80211_TXQ_ATTR_CWMIN, | |
1443 | NL80211_TXQ_ATTR_CWMAX, | |
1444 | NL80211_TXQ_ATTR_AIFS, | |
1445 | ||
1446 | /* keep last */ | |
1447 | __NL80211_TXQ_ATTR_AFTER_LAST, | |
1448 | NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 | |
1449 | }; | |
1450 | ||
1451 | enum nl80211_txq_q { | |
1452 | NL80211_TXQ_Q_VO, | |
1453 | NL80211_TXQ_Q_VI, | |
1454 | NL80211_TXQ_Q_BE, | |
1455 | NL80211_TXQ_Q_BK | |
1456 | }; | |
1457 | ||
094d05dc S |
1458 | enum nl80211_channel_type { |
1459 | NL80211_CHAN_NO_HT, | |
1460 | NL80211_CHAN_HT20, | |
1461 | NL80211_CHAN_HT40MINUS, | |
1462 | NL80211_CHAN_HT40PLUS | |
72bdcf34 | 1463 | }; |
2a519311 JB |
1464 | |
1465 | /** | |
1466 | * enum nl80211_bss - netlink attributes for a BSS | |
1467 | * | |
1468 | * @__NL80211_BSS_INVALID: invalid | |
1469 | * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) | |
1470 | * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) | |
1471 | * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) | |
1472 | * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) | |
1473 | * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the | |
34a6eddb JM |
1474 | * raw information elements from the probe response/beacon (bin); |
1475 | * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are | |
1476 | * from a Probe Response frame; otherwise they are from a Beacon frame. | |
1477 | * However, if the driver does not indicate the source of the IEs, these | |
1478 | * IEs may be from either frame subtype. | |
2a519311 JB |
1479 | * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon |
1480 | * in mBm (100 * dBm) (s32) | |
1481 | * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon | |
1482 | * in unspecified units, scaled to 0..100 (u8) | |
48ab905d | 1483 | * @NL80211_BSS_STATUS: status, if this BSS is "used" |
7c89606e | 1484 | * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms |
34a6eddb JM |
1485 | * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information |
1486 | * elements from a Beacon frame (bin); not present if no Beacon frame has | |
1487 | * yet been received | |
2a519311 JB |
1488 | * @__NL80211_BSS_AFTER_LAST: internal |
1489 | * @NL80211_BSS_MAX: highest BSS attribute | |
1490 | */ | |
1491 | enum nl80211_bss { | |
1492 | __NL80211_BSS_INVALID, | |
1493 | NL80211_BSS_BSSID, | |
1494 | NL80211_BSS_FREQUENCY, | |
1495 | NL80211_BSS_TSF, | |
1496 | NL80211_BSS_BEACON_INTERVAL, | |
1497 | NL80211_BSS_CAPABILITY, | |
1498 | NL80211_BSS_INFORMATION_ELEMENTS, | |
1499 | NL80211_BSS_SIGNAL_MBM, | |
1500 | NL80211_BSS_SIGNAL_UNSPEC, | |
48ab905d | 1501 | NL80211_BSS_STATUS, |
7c89606e | 1502 | NL80211_BSS_SEEN_MS_AGO, |
34a6eddb | 1503 | NL80211_BSS_BEACON_IES, |
2a519311 JB |
1504 | |
1505 | /* keep last */ | |
1506 | __NL80211_BSS_AFTER_LAST, | |
1507 | NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 | |
1508 | }; | |
1509 | ||
48ab905d JB |
1510 | /** |
1511 | * enum nl80211_bss_status - BSS "status" | |
1512 | */ | |
1513 | enum nl80211_bss_status { | |
1514 | NL80211_BSS_STATUS_AUTHENTICATED, | |
1515 | NL80211_BSS_STATUS_ASSOCIATED, | |
1516 | NL80211_BSS_STATUS_IBSS_JOINED, | |
1517 | }; | |
1518 | ||
636a5d36 JM |
1519 | /** |
1520 | * enum nl80211_auth_type - AuthenticationType | |
1521 | * | |
1522 | * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication | |
1523 | * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) | |
1524 | * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) | |
1525 | * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) | |
b23aa676 SO |
1526 | * @__NL80211_AUTHTYPE_NUM: internal |
1527 | * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm | |
1528 | * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by | |
1529 | * trying multiple times); this is invalid in netlink -- leave out | |
1530 | * the attribute for this on CONNECT commands. | |
636a5d36 JM |
1531 | */ |
1532 | enum nl80211_auth_type { | |
1533 | NL80211_AUTHTYPE_OPEN_SYSTEM, | |
1534 | NL80211_AUTHTYPE_SHARED_KEY, | |
1535 | NL80211_AUTHTYPE_FT, | |
1536 | NL80211_AUTHTYPE_NETWORK_EAP, | |
b23aa676 SO |
1537 | |
1538 | /* keep last */ | |
1539 | __NL80211_AUTHTYPE_NUM, | |
1540 | NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, | |
1541 | NL80211_AUTHTYPE_AUTOMATIC | |
636a5d36 | 1542 | }; |
a3b8b056 JM |
1543 | |
1544 | /** | |
1545 | * enum nl80211_key_type - Key Type | |
1546 | * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key | |
1547 | * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key | |
1548 | * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) | |
1549 | */ | |
1550 | enum nl80211_key_type { | |
1551 | NL80211_KEYTYPE_GROUP, | |
1552 | NL80211_KEYTYPE_PAIRWISE, | |
1553 | NL80211_KEYTYPE_PEERKEY, | |
1554 | }; | |
1555 | ||
dc6382ce JM |
1556 | /** |
1557 | * enum nl80211_mfp - Management frame protection state | |
1558 | * @NL80211_MFP_NO: Management frame protection not used | |
1559 | * @NL80211_MFP_REQUIRED: Management frame protection required | |
1560 | */ | |
1561 | enum nl80211_mfp { | |
1562 | NL80211_MFP_NO, | |
1563 | NL80211_MFP_REQUIRED, | |
1564 | }; | |
1565 | ||
b23aa676 SO |
1566 | enum nl80211_wpa_versions { |
1567 | NL80211_WPA_VERSION_1 = 1 << 0, | |
1568 | NL80211_WPA_VERSION_2 = 1 << 1, | |
1569 | }; | |
1570 | ||
b9454e83 JB |
1571 | /** |
1572 | * enum nl80211_key_attributes - key attributes | |
1573 | * @__NL80211_KEY_INVALID: invalid | |
1574 | * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of | |
1575 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
1576 | * keys | |
1577 | * @NL80211_KEY_IDX: key ID (u8, 0-3) | |
1578 | * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
1579 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
1580 | * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
1581 | * CCMP keys, each six bytes in little endian | |
1582 | * @NL80211_KEY_DEFAULT: flag indicating default key | |
1583 | * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key | |
1584 | * @__NL80211_KEY_AFTER_LAST: internal | |
1585 | * @NL80211_KEY_MAX: highest key attribute | |
1586 | */ | |
1587 | enum nl80211_key_attributes { | |
1588 | __NL80211_KEY_INVALID, | |
1589 | NL80211_KEY_DATA, | |
1590 | NL80211_KEY_IDX, | |
1591 | NL80211_KEY_CIPHER, | |
1592 | NL80211_KEY_SEQ, | |
1593 | NL80211_KEY_DEFAULT, | |
1594 | NL80211_KEY_DEFAULT_MGMT, | |
1595 | ||
1596 | /* keep last */ | |
1597 | __NL80211_KEY_AFTER_LAST, | |
1598 | NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 | |
1599 | }; | |
1600 | ||
13ae75b1 JM |
1601 | /** |
1602 | * enum nl80211_tx_rate_attributes - TX rate set attributes | |
1603 | * @__NL80211_TXRATE_INVALID: invalid | |
1604 | * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection | |
1605 | * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with | |
1606 | * 1 = 500 kbps) but without the IE length restriction (at most | |
1607 | * %NL80211_MAX_SUPP_RATES in a single array). | |
1608 | * @__NL80211_TXRATE_AFTER_LAST: internal | |
1609 | * @NL80211_TXRATE_MAX: highest TX rate attribute | |
1610 | */ | |
1611 | enum nl80211_tx_rate_attributes { | |
1612 | __NL80211_TXRATE_INVALID, | |
1613 | NL80211_TXRATE_LEGACY, | |
1614 | ||
1615 | /* keep last */ | |
1616 | __NL80211_TXRATE_AFTER_LAST, | |
1617 | NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 | |
1618 | }; | |
1619 | ||
1620 | /** | |
1621 | * enum nl80211_band - Frequency band | |
1622 | * @NL80211_BAND_2GHZ - 2.4 GHz ISM band | |
1623 | * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz) | |
1624 | */ | |
1625 | enum nl80211_band { | |
1626 | NL80211_BAND_2GHZ, | |
1627 | NL80211_BAND_5GHZ, | |
1628 | }; | |
1629 | ||
ffb9eb3d KV |
1630 | enum nl80211_ps_state { |
1631 | NL80211_PS_DISABLED, | |
1632 | NL80211_PS_ENABLED, | |
1633 | }; | |
1634 | ||
d6dc1a38 JO |
1635 | /** |
1636 | * enum nl80211_attr_cqm - connection quality monitor attributes | |
1637 | * @__NL80211_ATTR_CQM_INVALID: invalid | |
4ac5541b JO |
1638 | * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies |
1639 | * the threshold for the RSSI level at which an event will be sent. Zero | |
1640 | * to disable. | |
1641 | * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies | |
1642 | * the minimum amount the RSSI level must change after an event before a | |
1643 | * new event may be issued (to reduce effects of RSSI oscillation). | |
d6dc1a38 JO |
1644 | * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event |
1645 | * @__NL80211_ATTR_CQM_AFTER_LAST: internal | |
1646 | * @NL80211_ATTR_CQM_MAX: highest key attribute | |
1647 | */ | |
1648 | enum nl80211_attr_cqm { | |
1649 | __NL80211_ATTR_CQM_INVALID, | |
1650 | NL80211_ATTR_CQM_RSSI_THOLD, | |
1651 | NL80211_ATTR_CQM_RSSI_HYST, | |
1652 | NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, | |
1653 | ||
1654 | /* keep last */ | |
1655 | __NL80211_ATTR_CQM_AFTER_LAST, | |
1656 | NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 | |
1657 | }; | |
1658 | ||
1659 | /** | |
1660 | * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event | |
1661 | * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW - The RSSI level is lower than the | |
1662 | * configured threshold | |
1663 | * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH - The RSSI is higher than the | |
1664 | * configured threshold | |
1665 | */ | |
1666 | enum nl80211_cqm_rssi_threshold_event { | |
1667 | NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, | |
1668 | NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, | |
1669 | }; | |
1670 | ||
fa61cf70 JO |
1671 | |
1672 | /** | |
1673 | * enum nl80211_tx_power_setting - TX power adjustment | |
1674 | * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power | |
1675 | * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter | |
1676 | * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter | |
1677 | */ | |
1678 | enum nl80211_tx_power_setting { | |
1679 | NL80211_TX_POWER_AUTOMATIC, | |
1680 | NL80211_TX_POWER_LIMITED, | |
1681 | NL80211_TX_POWER_FIXED, | |
1682 | }; | |
1683 | ||
704232c2 | 1684 | #endif /* __LINUX_NL80211_H */ |