Commit | Line | Data |
---|---|---|
704232c2 JB |
1 | #ifndef __LINUX_NL80211_H |
2 | #define __LINUX_NL80211_H | |
3 | /* | |
4 | * 802.11 netlink interface public header | |
5 | * | |
026331c4 | 6 | * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> |
10ec4f1d LR |
7 | * Copyright 2008 Michael Wu <flamingice@sourmilk.net> |
8 | * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> | |
eb032b98 | 9 | * Copyright 2008 Michael Buesch <m@bues.ch> |
6bad8766 | 10 | * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> |
10ec4f1d LR |
11 | * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> |
12 | * Copyright 2008 Colin McCabe <colin@cozybit.com> | |
13 | * | |
14 | * Permission to use, copy, modify, and/or distribute this software for any | |
15 | * purpose with or without fee is hereby granted, provided that the above | |
16 | * copyright notice and this permission notice appear in all copies. | |
17 | * | |
18 | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
19 | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
20 | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
21 | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
22 | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
23 | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
24 | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
25 | * | |
704232c2 JB |
26 | */ |
27 | ||
eccb8e8f JB |
28 | #include <linux/types.h> |
29 | ||
5727ef1b JB |
30 | /** |
31 | * DOC: Station handling | |
32 | * | |
33 | * Stations are added per interface, but a special case exists with VLAN | |
34 | * interfaces. When a station is bound to an AP interface, it may be moved | |
35 | * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). | |
36 | * The station is still assumed to belong to the AP interface it was added | |
37 | * to. | |
38 | * | |
39 | * TODO: need more info? | |
40 | */ | |
41 | ||
2e161f78 JB |
42 | /** |
43 | * DOC: Frame transmission/registration support | |
44 | * | |
45 | * Frame transmission and registration support exists to allow userspace | |
46 | * management entities such as wpa_supplicant react to management frames | |
47 | * that are not being handled by the kernel. This includes, for example, | |
48 | * certain classes of action frames that cannot be handled in the kernel | |
49 | * for various reasons. | |
50 | * | |
51 | * Frame registration is done on a per-interface basis and registrations | |
52 | * cannot be removed other than by closing the socket. It is possible to | |
53 | * specify a registration filter to register, for example, only for a | |
54 | * certain type of action frame. In particular with action frames, those | |
55 | * that userspace registers for will not be returned as unhandled by the | |
56 | * driver, so that the registered application has to take responsibility | |
57 | * for doing that. | |
58 | * | |
59 | * The type of frame that can be registered for is also dependent on the | |
60 | * driver and interface type. The frame types are advertised in wiphy | |
61 | * attributes so applications know what to expect. | |
62 | * | |
63 | * NOTE: When an interface changes type while registrations are active, | |
64 | * these registrations are ignored until the interface type is | |
65 | * changed again. This means that changing the interface type can | |
66 | * lead to a situation that couldn't otherwise be produced, but | |
67 | * any such registrations will be dormant in the sense that they | |
68 | * will not be serviced, i.e. they will not receive any frames. | |
69 | * | |
70 | * Frame transmission allows userspace to send for example the required | |
71 | * responses to action frames. It is subject to some sanity checking, | |
72 | * but many frames can be transmitted. When a frame was transmitted, its | |
73 | * status is indicated to the sending socket. | |
74 | * | |
75 | * For more technical details, see the corresponding command descriptions | |
76 | * below. | |
77 | */ | |
78 | ||
7527a782 JB |
79 | /** |
80 | * DOC: Virtual interface / concurrency capabilities | |
81 | * | |
82 | * Some devices are able to operate with virtual MACs, they can have | |
83 | * more than one virtual interface. The capability handling for this | |
84 | * is a bit complex though, as there may be a number of restrictions | |
85 | * on the types of concurrency that are supported. | |
86 | * | |
87 | * To start with, each device supports the interface types listed in | |
88 | * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the | |
89 | * types there no concurrency is implied. | |
90 | * | |
91 | * Once concurrency is desired, more attributes must be observed: | |
92 | * To start with, since some interface types are purely managed in | |
93 | * software, like the AP-VLAN type in mac80211 for example, there's | |
94 | * an additional list of these, they can be added at any time and | |
95 | * are only restricted by some semantic restrictions (e.g. AP-VLAN | |
96 | * cannot be added without a corresponding AP interface). This list | |
97 | * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. | |
98 | * | |
99 | * Further, the list of supported combinations is exported. This is | |
100 | * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, | |
101 | * it exports a list of "groups", and at any point in time the | |
102 | * interfaces that are currently active must fall into any one of | |
103 | * the advertised groups. Within each group, there are restrictions | |
104 | * on the number of interfaces of different types that are supported | |
105 | * and also the number of different channels, along with potentially | |
106 | * some other restrictions. See &enum nl80211_if_combination_attrs. | |
107 | * | |
108 | * All together, these attributes define the concurrency of virtual | |
109 | * interfaces that a given device supports. | |
110 | */ | |
111 | ||
55682965 JB |
112 | /** |
113 | * enum nl80211_commands - supported nl80211 commands | |
114 | * | |
115 | * @NL80211_CMD_UNSPEC: unspecified command to catch errors | |
116 | * | |
117 | * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request | |
118 | * to get a list of all present wiphys. | |
31888487 | 119 | * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or |
72bdcf34 | 120 | * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, |
b9a5f8ca JM |
121 | * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, |
122 | * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, | |
123 | * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, | |
124 | * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. | |
f444de05 JB |
125 | * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL |
126 | * instead, the support here is for backward compatibility only. | |
55682965 JB |
127 | * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request |
128 | * or rename notification. Has attributes %NL80211_ATTR_WIPHY and | |
129 | * %NL80211_ATTR_WIPHY_NAME. | |
130 | * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes | |
131 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. | |
132 | * | |
133 | * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; | |
134 | * either a dump request on a %NL80211_ATTR_WIPHY or a specific get | |
135 | * on an %NL80211_ATTR_IFINDEX is supported. | |
136 | * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires | |
137 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. | |
138 | * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response | |
139 | * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, | |
140 | * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also | |
141 | * be sent from userspace to request creation of a new virtual interface, | |
142 | * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and | |
143 | * %NL80211_ATTR_IFNAME. | |
144 | * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes | |
145 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from | |
146 | * userspace to request deletion of a virtual interface, then requires | |
147 | * attribute %NL80211_ATTR_IFINDEX. | |
148 | * | |
41ade00f JB |
149 | * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified |
150 | * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. | |
3cfcf6ac JM |
151 | * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, |
152 | * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. | |
41ade00f | 153 | * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, |
faa8fdc8 JM |
154 | * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, |
155 | * and %NL80211_ATTR_KEY_SEQ attributes. | |
41ade00f JB |
156 | * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX |
157 | * or %NL80211_ATTR_MAC. | |
158 | * | |
ed1b6cc7 JB |
159 | * @NL80211_CMD_GET_BEACON: retrieve beacon information (returned in a |
160 | * %NL80222_CMD_NEW_BEACON message) | |
161 | * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface | |
162 | * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, | |
d03415e6 | 163 | * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. |
32e9de84 JM |
164 | * Following attributes are provided for drivers that generate full Beacon |
165 | * and Probe Response frames internally: %NL80211_ATTR_SSID, | |
5fb628e9 JM |
166 | * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, |
167 | * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, | |
168 | * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, | |
9946ecfb JM |
169 | * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, |
170 | * %NL80211_ATTR_IE_ASSOC_RESP. | |
ed1b6cc7 JB |
171 | * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, |
172 | * parameters are like for %NL80211_CMD_SET_BEACON. | |
173 | * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it | |
174 | * | |
5727ef1b JB |
175 | * @NL80211_CMD_GET_STATION: Get station attributes for station identified by |
176 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
177 | * @NL80211_CMD_SET_STATION: Set station attributes for station identified by | |
178 | * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. | |
179 | * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the | |
180 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
181 | * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC | |
182 | * or, if no MAC address given, all stations, on the interface identified | |
183 | * by %NL80211_ATTR_IFINDEX. | |
184 | * | |
2ec600d6 LCC |
185 | * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to |
186 | * destination %NL80211_ATTR_MAC on the interface identified by | |
187 | * %NL80211_ATTR_IFINDEX. | |
188 | * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to | |
189 | * destination %NL80211_ATTR_MAC on the interface identified by | |
190 | * %NL80211_ATTR_IFINDEX. | |
45007fd5 JB |
191 | * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by |
192 | * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. | |
193 | * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by | |
194 | * %NL80211_ATTR_MAC. | |
2ec600d6 LCC |
195 | * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the |
196 | * the interface identified by %NL80211_ATTR_IFINDEX. | |
197 | * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC | |
198 | * or, if no MAC address given, all mesh paths, on the interface identified | |
199 | * by %NL80211_ATTR_IFINDEX. | |
9f1ba906 JM |
200 | * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by |
201 | * %NL80211_ATTR_IFINDEX. | |
2ec600d6 | 202 | * |
f130347c LR |
203 | * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set |
204 | * regulatory domain. | |
b2e1b302 LR |
205 | * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command |
206 | * after being queried by the kernel. CRDA replies by sending a regulatory | |
207 | * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our | |
208 | * current alpha2 if it found a match. It also provides | |
209 | * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each | |
210 | * regulatory rule is a nested set of attributes given by | |
211 | * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and | |
212 | * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by | |
213 | * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and | |
214 | * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. | |
215 | * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain | |
77c2061d | 216 | * to the specified ISO/IEC 3166-1 alpha2 country code. The core will |
b2e1b302 LR |
217 | * store this as a valid request and then query userspace for it. |
218 | * | |
24bdd9f4 | 219 | * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the |
93da9cc1 | 220 | * interface identified by %NL80211_ATTR_IFINDEX |
221 | * | |
24bdd9f4 | 222 | * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the |
93da9cc1 | 223 | * interface identified by %NL80211_ATTR_IFINDEX |
224 | * | |
9aed3cc1 JM |
225 | * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The |
226 | * interface is identified with %NL80211_ATTR_IFINDEX and the management | |
227 | * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be | |
228 | * added to the end of the specified management frame is specified with | |
229 | * %NL80211_ATTR_IE. If the command succeeds, the requested data will be | |
230 | * added to all specified management frames generated by | |
231 | * kernel/firmware/driver. | |
65fc73ac JM |
232 | * Note: This command has been removed and it is only reserved at this |
233 | * point to avoid re-using existing command number. The functionality this | |
234 | * command was planned for has been provided with cleaner design with the | |
235 | * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, | |
236 | * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, | |
237 | * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. | |
9aed3cc1 | 238 | * |
2a519311 JB |
239 | * @NL80211_CMD_GET_SCAN: get scan results |
240 | * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters | |
e9f935e3 RM |
241 | * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the |
242 | * probe requests at CCK rate or not. | |
2a519311 JB |
243 | * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to |
244 | * NL80211_CMD_GET_SCAN and on the "scan" multicast group) | |
245 | * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, | |
246 | * partial scan results may be available | |
247 | * | |
bbe6ad6d LC |
248 | * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain |
249 | * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL. | |
250 | * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) | |
251 | * are passed, they are used in the probe requests. For | |
252 | * broadcast, a broadcast SSID must be passed (ie. an empty | |
253 | * string). If no SSID is passed, no probe requests are sent and | |
254 | * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, | |
255 | * if passed, define which channels should be scanned; if not | |
256 | * passed, all channels allowed for the current regulatory domain | |
257 | * are used. Extra IEs can also be passed from the userspace by | |
258 | * using the %NL80211_ATTR_IE attribute. | |
1a84ff75 LC |
259 | * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT |
260 | * if scheduled scan is not running. | |
807f8a8c LC |
261 | * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan |
262 | * results available. | |
263 | * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has | |
264 | * stopped. The driver may issue this event at any time during a | |
265 | * scheduled scan. One reason for stopping the scan is if the hardware | |
266 | * does not support starting an association or a normal scan while running | |
267 | * a scheduled scan. This event is also sent when the | |
268 | * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface | |
269 | * is brought down while a scheduled scan was running. | |
270 | * | |
61fa713c HS |
271 | * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation |
272 | * or noise level | |
273 | * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to | |
274 | * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) | |
275 | * | |
73d54c9e LR |
276 | * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain |
277 | * has been changed and provides details of the request information | |
278 | * that caused the change such as who initiated the regulatory request | |
279 | * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx | |
280 | * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if | |
281 | * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or | |
282 | * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain | |
283 | * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is | |
284 | * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on | |
285 | * to (%NL80211_ATTR_REG_ALPHA2). | |
6bad8766 LR |
286 | * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon |
287 | * has been found while world roaming thus enabling active scan or | |
288 | * any mode of operation that initiates TX (beacons) on a channel | |
289 | * where we would not have been able to do either before. As an example | |
290 | * if you are world roaming (regulatory domain set to world or if your | |
291 | * driver is using a custom world roaming regulatory domain) and while | |
292 | * doing a passive scan on the 5 GHz band you find an AP there (if not | |
293 | * on a DFS channel) you will now be able to actively scan for that AP | |
294 | * or use AP mode on your card on that same channel. Note that this will | |
295 | * never be used for channels 1-11 on the 2 GHz band as they are always | |
296 | * enabled world wide. This beacon hint is only sent if your device had | |
297 | * either disabled active scanning or beaconing on a channel. We send to | |
298 | * userspace the wiphy on which we removed a restriction from | |
299 | * (%NL80211_ATTR_WIPHY) and the channel on which this occurred | |
300 | * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) | |
301 | * the beacon hint was processed. | |
73d54c9e | 302 | * |
636a5d36 JM |
303 | * @NL80211_CMD_AUTHENTICATE: authentication request and notification. |
304 | * This command is used both as a command (request to authenticate) and | |
305 | * as an event on the "mlme" multicast group indicating completion of the | |
306 | * authentication process. | |
307 | * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the | |
308 | * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and | |
309 | * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify | |
310 | * the SSID (mainly for association, but is included in authentication | |
311 | * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used | |
312 | * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE | |
313 | * is used to specify the authentication type. %NL80211_ATTR_IE is used to | |
314 | * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs) | |
315 | * to be added to the frame. | |
316 | * When used as an event, this reports reception of an Authentication | |
6039f6d2 JM |
317 | * frame in station and IBSS modes when the local MLME processed the |
318 | * frame, i.e., it was for the local STA and was received in correct | |
319 | * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the | |
320 | * MLME SAP interface (kernel providing MLME, userspace SME). The | |
1965c853 JM |
321 | * included %NL80211_ATTR_FRAME attribute contains the management frame |
322 | * (including both the header and frame body, but not FCS). This event is | |
323 | * also used to indicate if the authentication attempt timed out. In that | |
324 | * case the %NL80211_ATTR_FRAME attribute is replaced with a | |
325 | * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which | |
326 | * pending authentication timed out). | |
636a5d36 JM |
327 | * @NL80211_CMD_ASSOCIATE: association request and notification; like |
328 | * NL80211_CMD_AUTHENTICATE but for Association and Reassociation | |
329 | * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, | |
330 | * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). | |
331 | * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like | |
6039f6d2 | 332 | * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to |
636a5d36 JM |
333 | * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication |
334 | * primitives). | |
335 | * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like | |
6039f6d2 | 336 | * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to |
636a5d36 | 337 | * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). |
6039f6d2 | 338 | * |
a3b8b056 JM |
339 | * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael |
340 | * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the | |
341 | * event includes %NL80211_ATTR_MAC to describe the source MAC address of | |
342 | * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key | |
343 | * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and | |
344 | * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this | |
345 | * event matches with MLME-MICHAELMICFAILURE.indication() primitive | |
346 | * | |
04a773ad JB |
347 | * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a |
348 | * FREQ attribute (for the initial frequency if no peer can be found) | |
349 | * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those | |
350 | * should be fixed rather than automatically determined. Can only be | |
351 | * executed on a network interface that is UP, and fixed BSSID/FREQ | |
8e30bc55 JB |
352 | * may be rejected. Another optional parameter is the beacon interval, |
353 | * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not | |
354 | * given defaults to 100 TU (102.4ms). | |
04a773ad JB |
355 | * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is |
356 | * determined by the network interface. | |
357 | * | |
aff89a9b JB |
358 | * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute |
359 | * to identify the device, and the TESTDATA blob attribute to pass through | |
360 | * to the driver. | |
361 | * | |
b23aa676 SO |
362 | * @NL80211_CMD_CONNECT: connection request and notification; this command |
363 | * requests to connect to a specified network but without separating | |
364 | * auth and assoc steps. For this, you need to specify the SSID in a | |
365 | * %NL80211_ATTR_SSID attribute, and can optionally specify the association | |
366 | * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, | |
c0692b8f JB |
367 | * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, |
368 | * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and | |
369 | * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. | |
b23aa676 SO |
370 | * It is also sent as an event, with the BSSID and response IEs when the |
371 | * connection is established or failed to be established. This can be | |
372 | * determined by the STATUS_CODE attribute. | |
373 | * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), | |
374 | * sent as an event when the card/driver roamed by itself. | |
375 | * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify | |
376 | * userspace that a connection was dropped by the AP or due to other | |
377 | * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and | |
378 | * %NL80211_ATTR_REASON_CODE attributes are used. | |
379 | * | |
463d0183 JB |
380 | * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices |
381 | * associated with this wiphy must be down and will follow. | |
382 | * | |
9588bbd5 JM |
383 | * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified |
384 | * channel for the specified amount of time. This can be used to do | |
385 | * off-channel operations like transmit a Public Action frame and wait for | |
386 | * a response while being associated to an AP on another channel. | |
691895e7 JB |
387 | * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus |
388 | * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the | |
9588bbd5 JM |
389 | * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be |
390 | * optionally used to specify additional channel parameters. | |
391 | * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds | |
392 | * to remain on the channel. This command is also used as an event to | |
393 | * notify when the requested duration starts (it may take a while for the | |
394 | * driver to schedule this time due to other concurrent needs for the | |
395 | * radio). | |
396 | * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) | |
397 | * that will be included with any events pertaining to this request; | |
398 | * the cookie is also used to cancel the request. | |
399 | * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a | |
400 | * pending remain-on-channel duration if the desired operation has been | |
401 | * completed prior to expiration of the originally requested duration. | |
402 | * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the | |
403 | * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to | |
404 | * uniquely identify the request. | |
405 | * This command is also used as an event to notify when a requested | |
406 | * remain-on-channel duration has expired. | |
407 | * | |
13ae75b1 JM |
408 | * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX |
409 | * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface | |
410 | * and @NL80211_ATTR_TX_RATES the set of allowed rates. | |
411 | * | |
2e161f78 JB |
412 | * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames |
413 | * (via @NL80211_CMD_FRAME) for processing in userspace. This command | |
414 | * requires an interface index, a frame type attribute (optional for | |
415 | * backward compatibility reasons, if not given assumes action frames) | |
416 | * and a match attribute containing the first few bytes of the frame | |
417 | * that should match, e.g. a single byte for only a category match or | |
418 | * four bytes for vendor frames including the OUI. The registration | |
419 | * cannot be dropped, but is removed automatically when the netlink | |
420 | * socket is closed. Multiple registrations can be made. | |
2a5fb7b0 JB |
421 | * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for |
422 | * backward compatibility | |
2e161f78 JB |
423 | * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This |
424 | * command is used both as a request to transmit a management frame and | |
425 | * as an event indicating reception of a frame that was not processed in | |
026331c4 JM |
426 | * kernel code, but is for us (i.e., which may need to be processed in a |
427 | * user space application). %NL80211_ATTR_FRAME is used to specify the | |
428 | * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and | |
429 | * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on | |
f7ca38df JB |
430 | * which channel the frame is to be transmitted or was received. If this |
431 | * channel is not the current channel (remain-on-channel or the | |
432 | * operational channel) the device will switch to the given channel and | |
433 | * transmit the frame, optionally waiting for a response for the time | |
434 | * specified using %NL80211_ATTR_DURATION. When called, this operation | |
435 | * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the | |
436 | * TX status event pertaining to the TX request. | |
e9f935e3 RM |
437 | * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the |
438 | * management frames at CCK rate or not in 2GHz band. | |
f7ca38df JB |
439 | * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this |
440 | * command may be used with the corresponding cookie to cancel the wait | |
441 | * time if it is known that it is no longer necessary. | |
2a5fb7b0 | 442 | * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. |
2e161f78 JB |
443 | * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame |
444 | * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies | |
026331c4 JM |
445 | * the TX command and %NL80211_ATTR_FRAME includes the contents of the |
446 | * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged | |
447 | * the frame. | |
2a5fb7b0 JB |
448 | * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for |
449 | * backward compatibility. | |
d6dc1a38 JO |
450 | * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command |
451 | * is used to configure connection quality monitoring notification trigger | |
452 | * levels. | |
453 | * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This | |
454 | * command is used as an event to indicate the that a trigger level was | |
455 | * reached. | |
f444de05 JB |
456 | * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ |
457 | * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed | |
458 | * by %NL80211_ATTR_IFINDEX) shall operate on. | |
459 | * In case multiple channels are supported by the device, the mechanism | |
460 | * with which it switches channels is implementation-defined. | |
461 | * When a monitor interface is given, it can only switch channel while | |
462 | * no other interfaces are operating to avoid disturbing the operation | |
463 | * of any other interfaces, and other interfaces will again take | |
464 | * precedence when they are used. | |
026331c4 | 465 | * |
e8347eba BJ |
466 | * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. |
467 | * | |
29cbe68c JB |
468 | * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial |
469 | * mesh config parameters may be given. | |
470 | * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the | |
471 | * network is determined by the network interface. | |
472 | * | |
cf4e594e JM |
473 | * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame |
474 | * notification. This event is used to indicate that an unprotected | |
475 | * deauthentication frame was dropped when MFP is in use. | |
476 | * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame | |
477 | * notification. This event is used to indicate that an unprotected | |
478 | * disassociation frame was dropped when MFP is in use. | |
479 | * | |
c93b5e71 JC |
480 | * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a |
481 | * beacon or probe response from a compatible mesh peer. This is only | |
482 | * sent while no station information (sta_info) exists for the new peer | |
483 | * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On | |
484 | * reception of this notification, userspace may decide to create a new | |
485 | * station (@NL80211_CMD_NEW_STATION). To stop this notification from | |
486 | * reoccurring, the userspace authentication daemon may want to create the | |
487 | * new station with the AUTHENTICATED flag unset and maybe change it later | |
488 | * depending on the authentication result. | |
489 | * | |
ff1b6e69 JB |
490 | * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. |
491 | * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. | |
492 | * Since wireless is more complex than wired ethernet, it supports | |
493 | * various triggers. These triggers can be configured through this | |
494 | * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For | |
495 | * more background information, see | |
496 | * http://wireless.kernel.org/en/users/Documentation/WoWLAN. | |
497 | * | |
e5497d76 JB |
498 | * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver |
499 | * the necessary information for supporting GTK rekey offload. This | |
500 | * feature is typically used during WoWLAN. The configuration data | |
501 | * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and | |
502 | * contains the data in sub-attributes). After rekeying happened, | |
503 | * this command may also be sent by the driver as an MLME event to | |
504 | * inform userspace of the new replay counter. | |
505 | * | |
c9df56b4 JM |
506 | * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace |
507 | * of PMKSA caching dandidates. | |
508 | * | |
109086ce AN |
509 | * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). |
510 | * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. | |
511 | * | |
28946da7 JB |
512 | * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP |
513 | * (or GO) interface (i.e. hostapd) to ask for unexpected frames to | |
514 | * implement sending deauth to stations that send unexpected class 3 | |
515 | * frames. Also used as the event sent by the kernel when such a frame | |
516 | * is received. | |
517 | * For the event, the %NL80211_ATTR_MAC attribute carries the TA and | |
518 | * other attributes like the interface index are present. | |
519 | * If used as the command it must have an interface index and you can | |
b92ab5d8 JB |
520 | * only unsubscribe from the event by closing the socket. Subscription |
521 | * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. | |
522 | * | |
523 | * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the | |
524 | * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame | |
525 | * and wasn't already in a 4-addr VLAN. The event will be sent similarly | |
526 | * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. | |
28946da7 | 527 | * |
7f6cf311 JB |
528 | * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface |
529 | * by sending a null data frame to it and reporting when the frame is | |
530 | * acknowleged. This is used to allow timing out inactive clients. Uses | |
531 | * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a | |
532 | * direct reply with an %NL80211_ATTR_COOKIE that is later used to match | |
533 | * up the event with the request. The event includes the same data and | |
534 | * has %NL80211_ATTR_ACK set if the frame was ACKed. | |
535 | * | |
5e760230 JB |
536 | * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from |
537 | * other BSSes when any interfaces are in AP mode. This helps implement | |
538 | * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME | |
539 | * messages. Note that per PHY only one application may register. | |
540 | * | |
55682965 JB |
541 | * @NL80211_CMD_MAX: highest used command number |
542 | * @__NL80211_CMD_AFTER_LAST: internal use | |
543 | */ | |
544 | enum nl80211_commands { | |
25985edc | 545 | /* don't change the order or add anything between, this is ABI! */ |
55682965 JB |
546 | NL80211_CMD_UNSPEC, |
547 | ||
548 | NL80211_CMD_GET_WIPHY, /* can dump */ | |
549 | NL80211_CMD_SET_WIPHY, | |
550 | NL80211_CMD_NEW_WIPHY, | |
551 | NL80211_CMD_DEL_WIPHY, | |
552 | ||
553 | NL80211_CMD_GET_INTERFACE, /* can dump */ | |
554 | NL80211_CMD_SET_INTERFACE, | |
555 | NL80211_CMD_NEW_INTERFACE, | |
556 | NL80211_CMD_DEL_INTERFACE, | |
557 | ||
41ade00f JB |
558 | NL80211_CMD_GET_KEY, |
559 | NL80211_CMD_SET_KEY, | |
560 | NL80211_CMD_NEW_KEY, | |
561 | NL80211_CMD_DEL_KEY, | |
562 | ||
ed1b6cc7 JB |
563 | NL80211_CMD_GET_BEACON, |
564 | NL80211_CMD_SET_BEACON, | |
565 | NL80211_CMD_NEW_BEACON, | |
566 | NL80211_CMD_DEL_BEACON, | |
567 | ||
5727ef1b JB |
568 | NL80211_CMD_GET_STATION, |
569 | NL80211_CMD_SET_STATION, | |
570 | NL80211_CMD_NEW_STATION, | |
571 | NL80211_CMD_DEL_STATION, | |
572 | ||
2ec600d6 LCC |
573 | NL80211_CMD_GET_MPATH, |
574 | NL80211_CMD_SET_MPATH, | |
575 | NL80211_CMD_NEW_MPATH, | |
576 | NL80211_CMD_DEL_MPATH, | |
577 | ||
9f1ba906 JM |
578 | NL80211_CMD_SET_BSS, |
579 | ||
b2e1b302 LR |
580 | NL80211_CMD_SET_REG, |
581 | NL80211_CMD_REQ_SET_REG, | |
582 | ||
24bdd9f4 JC |
583 | NL80211_CMD_GET_MESH_CONFIG, |
584 | NL80211_CMD_SET_MESH_CONFIG, | |
93da9cc1 | 585 | |
65fc73ac | 586 | NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, |
9aed3cc1 | 587 | |
f130347c LR |
588 | NL80211_CMD_GET_REG, |
589 | ||
2a519311 JB |
590 | NL80211_CMD_GET_SCAN, |
591 | NL80211_CMD_TRIGGER_SCAN, | |
592 | NL80211_CMD_NEW_SCAN_RESULTS, | |
593 | NL80211_CMD_SCAN_ABORTED, | |
594 | ||
73d54c9e LR |
595 | NL80211_CMD_REG_CHANGE, |
596 | ||
6039f6d2 JM |
597 | NL80211_CMD_AUTHENTICATE, |
598 | NL80211_CMD_ASSOCIATE, | |
599 | NL80211_CMD_DEAUTHENTICATE, | |
600 | NL80211_CMD_DISASSOCIATE, | |
601 | ||
a3b8b056 JM |
602 | NL80211_CMD_MICHAEL_MIC_FAILURE, |
603 | ||
6bad8766 LR |
604 | NL80211_CMD_REG_BEACON_HINT, |
605 | ||
04a773ad JB |
606 | NL80211_CMD_JOIN_IBSS, |
607 | NL80211_CMD_LEAVE_IBSS, | |
608 | ||
aff89a9b JB |
609 | NL80211_CMD_TESTMODE, |
610 | ||
b23aa676 SO |
611 | NL80211_CMD_CONNECT, |
612 | NL80211_CMD_ROAM, | |
613 | NL80211_CMD_DISCONNECT, | |
614 | ||
463d0183 JB |
615 | NL80211_CMD_SET_WIPHY_NETNS, |
616 | ||
61fa713c HS |
617 | NL80211_CMD_GET_SURVEY, |
618 | NL80211_CMD_NEW_SURVEY_RESULTS, | |
619 | ||
67fbb16b SO |
620 | NL80211_CMD_SET_PMKSA, |
621 | NL80211_CMD_DEL_PMKSA, | |
622 | NL80211_CMD_FLUSH_PMKSA, | |
623 | ||
9588bbd5 JM |
624 | NL80211_CMD_REMAIN_ON_CHANNEL, |
625 | NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, | |
626 | ||
13ae75b1 JM |
627 | NL80211_CMD_SET_TX_BITRATE_MASK, |
628 | ||
2e161f78 JB |
629 | NL80211_CMD_REGISTER_FRAME, |
630 | NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, | |
631 | NL80211_CMD_FRAME, | |
632 | NL80211_CMD_ACTION = NL80211_CMD_FRAME, | |
633 | NL80211_CMD_FRAME_TX_STATUS, | |
634 | NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, | |
026331c4 | 635 | |
ffb9eb3d KV |
636 | NL80211_CMD_SET_POWER_SAVE, |
637 | NL80211_CMD_GET_POWER_SAVE, | |
638 | ||
d6dc1a38 JO |
639 | NL80211_CMD_SET_CQM, |
640 | NL80211_CMD_NOTIFY_CQM, | |
641 | ||
f444de05 | 642 | NL80211_CMD_SET_CHANNEL, |
e8347eba | 643 | NL80211_CMD_SET_WDS_PEER, |
f444de05 | 644 | |
f7ca38df JB |
645 | NL80211_CMD_FRAME_WAIT_CANCEL, |
646 | ||
29cbe68c JB |
647 | NL80211_CMD_JOIN_MESH, |
648 | NL80211_CMD_LEAVE_MESH, | |
649 | ||
cf4e594e JM |
650 | NL80211_CMD_UNPROT_DEAUTHENTICATE, |
651 | NL80211_CMD_UNPROT_DISASSOCIATE, | |
652 | ||
c93b5e71 JC |
653 | NL80211_CMD_NEW_PEER_CANDIDATE, |
654 | ||
ff1b6e69 JB |
655 | NL80211_CMD_GET_WOWLAN, |
656 | NL80211_CMD_SET_WOWLAN, | |
657 | ||
807f8a8c LC |
658 | NL80211_CMD_START_SCHED_SCAN, |
659 | NL80211_CMD_STOP_SCHED_SCAN, | |
660 | NL80211_CMD_SCHED_SCAN_RESULTS, | |
661 | NL80211_CMD_SCHED_SCAN_STOPPED, | |
662 | ||
e5497d76 JB |
663 | NL80211_CMD_SET_REKEY_OFFLOAD, |
664 | ||
c9df56b4 JM |
665 | NL80211_CMD_PMKSA_CANDIDATE, |
666 | ||
109086ce AN |
667 | NL80211_CMD_TDLS_OPER, |
668 | NL80211_CMD_TDLS_MGMT, | |
669 | ||
28946da7 JB |
670 | NL80211_CMD_UNEXPECTED_FRAME, |
671 | ||
7f6cf311 JB |
672 | NL80211_CMD_PROBE_CLIENT, |
673 | ||
5e760230 JB |
674 | NL80211_CMD_REGISTER_BEACONS, |
675 | ||
b92ab5d8 JB |
676 | NL80211_CMD_UNEXPECTED_4ADDR_FRAME, |
677 | ||
b2e1b302 | 678 | /* add new commands above here */ |
564d9bdd | 679 | |
55682965 JB |
680 | /* used to define NL80211_CMD_MAX below */ |
681 | __NL80211_CMD_AFTER_LAST, | |
682 | NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 | |
683 | }; | |
684 | ||
9f1ba906 JM |
685 | /* |
686 | * Allow user space programs to use #ifdef on new commands by defining them | |
687 | * here | |
688 | */ | |
689 | #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS | |
9aed3cc1 | 690 | #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE |
73d54c9e | 691 | #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE |
6039f6d2 JM |
692 | #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE |
693 | #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE | |
694 | #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE | |
695 | #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE | |
6bad8766 | 696 | #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT |
73d54c9e | 697 | |
1f074bd8 JB |
698 | #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS |
699 | ||
24bdd9f4 JC |
700 | /* source-level API compatibility */ |
701 | #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG | |
702 | #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG | |
581a8b0f | 703 | #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE |
24bdd9f4 | 704 | |
55682965 JB |
705 | /** |
706 | * enum nl80211_attrs - nl80211 netlink attributes | |
707 | * | |
708 | * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors | |
709 | * | |
710 | * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. | |
711 | * /sys/class/ieee80211/<phyname>/index | |
712 | * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) | |
31888487 | 713 | * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters |
72bdcf34 | 714 | * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz |
094d05dc | 715 | * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ |
72bdcf34 | 716 | * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): |
094d05dc | 717 | * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including |
72bdcf34 | 718 | * this attribute) |
094d05dc S |
719 | * NL80211_CHAN_HT20 = HT20 only |
720 | * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel | |
721 | * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel | |
b9a5f8ca JM |
722 | * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is |
723 | * less than or equal to the RTS threshold; allowed range: 1..255; | |
724 | * dot11ShortRetryLimit; u8 | |
725 | * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is | |
726 | * greater than the RTS threshold; allowed range: 1..255; | |
727 | * dot11ShortLongLimit; u8 | |
728 | * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum | |
729 | * length in octets for frames; allowed range: 256..8000, disable | |
730 | * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 | |
731 | * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length | |
732 | * larger than or equal to this use RTS/CTS handshake); allowed range: | |
733 | * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 | |
81077e82 LT |
734 | * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 |
735 | * section 7.3.2.9; dot11CoverageClass; u8 | |
55682965 JB |
736 | * |
737 | * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on | |
738 | * @NL80211_ATTR_IFNAME: network interface name | |
739 | * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype | |
740 | * | |
41ade00f JB |
741 | * @NL80211_ATTR_MAC: MAC address (various uses) |
742 | * | |
743 | * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of | |
744 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
745 | * keys | |
746 | * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) | |
747 | * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
748 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
749 | * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
750 | * CCMP keys, each six bytes in little endian | |
751 | * | |
ed1b6cc7 JB |
752 | * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU |
753 | * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing | |
754 | * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE | |
755 | * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE | |
756 | * | |
5727ef1b JB |
757 | * @NL80211_ATTR_STA_AID: Association ID for the station (u16) |
758 | * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of | |
eccb8e8f | 759 | * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) |
5727ef1b JB |
760 | * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by |
761 | * IEEE 802.11 7.3.1.6 (u16). | |
762 | * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported | |
763 | * rates as defined by IEEE 802.11 7.3.2.2 but without the length | |
764 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
765 | * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station | |
766 | * to, or the AP interface the station was originally added to to. | |
2ec600d6 | 767 | * @NL80211_ATTR_STA_INFO: information about a station, part of station info |
fd5b74dc | 768 | * given for %NL80211_CMD_GET_STATION, nested attribute containing |
2ec600d6 | 769 | * info as possible, see &enum nl80211_sta_info. |
5727ef1b | 770 | * |
ee688b00 JB |
771 | * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, |
772 | * consisting of a nested array. | |
773 | * | |
2ec600d6 | 774 | * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). |
45007fd5 | 775 | * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link. |
2ec600d6 LCC |
776 | * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. |
777 | * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path | |
778 | * info given for %NL80211_CMD_GET_MPATH, nested attribute described at | |
779 | * &enum nl80211_mpath_info. | |
780 | * | |
66f7ac50 MW |
781 | * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of |
782 | * &enum nl80211_mntr_flags. | |
783 | * | |
b2e1b302 LR |
784 | * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the |
785 | * current regulatory domain should be set to or is already set to. | |
786 | * For example, 'CR', for Costa Rica. This attribute is used by the kernel | |
787 | * to query the CRDA to retrieve one regulatory domain. This attribute can | |
788 | * also be used by userspace to query the kernel for the currently set | |
789 | * regulatory domain. We chose an alpha2 as that is also used by the | |
790 | * IEEE-802.11d country information element to identify a country. | |
791 | * Users can also simply ask the wireless core to set regulatory domain | |
792 | * to a specific alpha2. | |
793 | * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory | |
794 | * rules. | |
795 | * | |
9f1ba906 JM |
796 | * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) |
797 | * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled | |
798 | * (u8, 0 or 1) | |
799 | * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled | |
800 | * (u8, 0 or 1) | |
90c97a04 JM |
801 | * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic |
802 | * rates in format defined by IEEE 802.11 7.3.2.2 but without the length | |
803 | * restriction (at most %NL80211_MAX_SUPP_RATES). | |
9f1ba906 | 804 | * |
36aedc90 JM |
805 | * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from |
806 | * association request when used with NL80211_CMD_NEW_STATION) | |
807 | * | |
f59ac048 LR |
808 | * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all |
809 | * supported interface types, each a flag attribute with the number | |
810 | * of the interface mode. | |
811 | * | |
9aed3cc1 JM |
812 | * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for |
813 | * %NL80211_CMD_SET_MGMT_EXTRA_IE. | |
814 | * | |
815 | * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with | |
816 | * %NL80211_CMD_SET_MGMT_EXTRA_IE). | |
817 | * | |
2a519311 JB |
818 | * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with |
819 | * a single scan request, a wiphy attribute. | |
93b6aa69 LC |
820 | * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can |
821 | * scan with a single scheduled scan request, a wiphy attribute. | |
18a83659 JB |
822 | * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements |
823 | * that can be added to a scan request | |
5a865bad LC |
824 | * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information |
825 | * elements that can be added to a scheduled scan request | |
a1f1c21c LC |
826 | * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be |
827 | * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. | |
2a519311 JB |
828 | * |
829 | * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) | |
830 | * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive | |
831 | * scanning and include a zero-length SSID (wildcard) for wildcard scan | |
2a519311 JB |
832 | * @NL80211_ATTR_BSS: scan result BSS |
833 | * | |
73d54c9e LR |
834 | * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain |
835 | * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* | |
836 | * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently | |
837 | * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) | |
838 | * | |
8fdc621d JB |
839 | * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies |
840 | * an array of command numbers (i.e. a mapping index to command number) | |
841 | * that the driver for the given wiphy supports. | |
842 | * | |
6039f6d2 JM |
843 | * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header |
844 | * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and | |
845 | * NL80211_CMD_ASSOCIATE events | |
636a5d36 JM |
846 | * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) |
847 | * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, | |
848 | * represented as a u32 | |
849 | * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and | |
850 | * %NL80211_CMD_DISASSOCIATE, u16 | |
6039f6d2 | 851 | * |
a3b8b056 JM |
852 | * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as |
853 | * a u32 | |
854 | * | |
6bad8766 LR |
855 | * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change |
856 | * due to considerations from a beacon hint. This attribute reflects | |
857 | * the state of the channel _before_ the beacon hint processing. This | |
858 | * attributes consists of a nested attribute containing | |
859 | * NL80211_FREQUENCY_ATTR_* | |
860 | * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change | |
861 | * due to considerations from a beacon hint. This attribute reflects | |
862 | * the state of the channel _after_ the beacon hint processing. This | |
863 | * attributes consists of a nested attribute containing | |
864 | * NL80211_FREQUENCY_ATTR_* | |
865 | * | |
25e47c18 JB |
866 | * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported |
867 | * cipher suites | |
868 | * | |
04a773ad JB |
869 | * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look |
870 | * for other networks on different channels | |
871 | * | |
1965c853 JM |
872 | * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this |
873 | * is used, e.g., with %NL80211_CMD_AUTHENTICATE event | |
874 | * | |
dc6382ce JM |
875 | * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is |
876 | * used for the association (&enum nl80211_mfp, represented as a u32); | |
877 | * this attribute can be used | |
878 | * with %NL80211_CMD_ASSOCIATE request | |
879 | * | |
eccb8e8f JB |
880 | * @NL80211_ATTR_STA_FLAGS2: Attribute containing a |
881 | * &struct nl80211_sta_flag_update. | |
882 | * | |
3f77316c JM |
883 | * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls |
884 | * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in | |
885 | * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE | |
886 | * request, the driver will assume that the port is unauthorized until | |
887 | * authorized by user space. Otherwise, port is marked authorized by | |
888 | * default in station mode. | |
c0692b8f JB |
889 | * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the |
890 | * ethertype that will be used for key negotiation. It can be | |
891 | * specified with the associate and connect commands. If it is not | |
892 | * specified, the value defaults to 0x888E (PAE, 802.1X). This | |
893 | * attribute is also used as a flag in the wiphy information to | |
894 | * indicate that protocols other than PAE are supported. | |
895 | * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with | |
896 | * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom | |
897 | * ethertype frames used for key negotiation must not be encrypted. | |
3f77316c | 898 | * |
aff89a9b JB |
899 | * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. |
900 | * We recommend using nested, driver-specific attributes within this. | |
901 | * | |
b23aa676 SO |
902 | * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT |
903 | * event was due to the AP disconnecting the station, and not due to | |
904 | * a local disconnect request. | |
905 | * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT | |
906 | * event (u16) | |
907 | * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating | |
5fb628e9 JM |
908 | * that protected APs should be used. This is also used with NEW_BEACON to |
909 | * indicate that the BSS is to use protection. | |
b23aa676 | 910 | * |
5fb628e9 JM |
911 | * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON |
912 | * to indicate which unicast key ciphers will be used with the connection | |
b23aa676 | 913 | * (an array of u32). |
5fb628e9 JM |
914 | * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
915 | * indicate which group key cipher will be used with the connection (a | |
916 | * u32). | |
917 | * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to | |
918 | * indicate which WPA version(s) the AP we want to associate with is using | |
b23aa676 | 919 | * (a u32 with flags from &enum nl80211_wpa_versions). |
5fb628e9 JM |
920 | * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to |
921 | * indicate which key management algorithm(s) to use (an array of u32). | |
b23aa676 SO |
922 | * |
923 | * @NL80211_ATTR_REQ_IE: (Re)association request information elements as | |
924 | * sent out by the card, for ROAM and successful CONNECT events. | |
925 | * @NL80211_ATTR_RESP_IE: (Re)association response information elements as | |
926 | * sent by peer, for ROAM and successful CONNECT events. | |
927 | * | |
3e5d7649 JB |
928 | * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used by in ASSOCIATE |
929 | * commands to specify using a reassociate frame | |
930 | * | |
b9454e83 JB |
931 | * @NL80211_ATTR_KEY: key information in a nested attribute with |
932 | * %NL80211_KEY_* sub-attributes | |
fffd0934 JB |
933 | * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() |
934 | * and join_ibss(), key information is in a nested attribute each | |
935 | * with %NL80211_KEY_* sub-attributes | |
b9454e83 | 936 | * |
463d0183 JB |
937 | * @NL80211_ATTR_PID: Process ID of a network namespace. |
938 | * | |
f5ea9120 JB |
939 | * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for |
940 | * dumps. This number increases whenever the object list being | |
941 | * dumped changes, and as such userspace can verify that it has | |
942 | * obtained a complete and consistent snapshot by verifying that | |
943 | * all dump messages contain the same generation number. If it | |
944 | * changed then the list changed and the dump should be repeated | |
945 | * completely from scratch. | |
946 | * | |
8b787643 FF |
947 | * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface |
948 | * | |
61fa713c HS |
949 | * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of |
950 | * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute | |
951 | * containing info as possible, see &enum survey_info. | |
952 | * | |
67fbb16b SO |
953 | * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. |
954 | * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can | |
955 | * cache, a wiphy attribute. | |
956 | * | |
9588bbd5 | 957 | * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. |
a293911d JB |
958 | * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that |
959 | * specifies the maximum duration that can be requested with the | |
960 | * remain-on-channel operation, in milliseconds, u32. | |
9588bbd5 JM |
961 | * |
962 | * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. | |
963 | * | |
13ae75b1 JM |
964 | * @NL80211_ATTR_TX_RATES: Nested set of attributes |
965 | * (enum nl80211_tx_rate_attributes) describing TX rates per band. The | |
966 | * enum nl80211_band value is used as the index (nla_type() of the nested | |
967 | * data. If a band is not included, it will be configured to allow all | |
968 | * rates based on negotiated supported rates information. This attribute | |
969 | * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. | |
970 | * | |
026331c4 | 971 | * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain |
2e161f78 JB |
972 | * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. |
973 | * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the | |
974 | * @NL80211_CMD_REGISTER_FRAME command. | |
975 | * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a | |
976 | * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing | |
977 | * information about which frame types can be transmitted with | |
978 | * %NL80211_CMD_FRAME. | |
979 | * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a | |
980 | * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing | |
981 | * information about which frame types can be registered for RX. | |
026331c4 JM |
982 | * |
983 | * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was | |
984 | * acknowledged by the recipient. | |
985 | * | |
d6dc1a38 JO |
986 | * @NL80211_ATTR_CQM: connection quality monitor configuration in a |
987 | * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. | |
988 | * | |
d5cdfacb JM |
989 | * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command |
990 | * is requesting a local authentication/association state change without | |
991 | * invoking actual management frame exchange. This can be used with | |
992 | * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, | |
993 | * NL80211_CMD_DISASSOCIATE. | |
994 | * | |
fd8aaaf3 FF |
995 | * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations |
996 | * connected to this BSS. | |
997 | * | |
98d2ff8b JO |
998 | * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See |
999 | * &enum nl80211_tx_power_setting for possible values. | |
1000 | * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. | |
1001 | * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING | |
1002 | * for non-automatic settings. | |
1003 | * | |
e31b8213 JB |
1004 | * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly |
1005 | * means support for per-station GTKs. | |
1006 | * | |
afe0cbf8 BR |
1007 | * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. |
1008 | * This can be used to mask out antennas which are not attached or should | |
1009 | * not be used for transmitting. If an antenna is not selected in this | |
1010 | * bitmap the hardware is not allowed to transmit on this antenna. | |
1011 | * | |
1012 | * Each bit represents one antenna, starting with antenna 1 at the first | |
1013 | * bit. Depending on which antennas are selected in the bitmap, 802.11n | |
1014 | * drivers can derive which chainmasks to use (if all antennas belonging to | |
1015 | * a particular chain are disabled this chain should be disabled) and if | |
1016 | * a chain has diversity antennas wether diversity should be used or not. | |
1017 | * HT capabilities (STBC, TX Beamforming, Antenna selection) can be | |
1018 | * derived from the available chains after applying the antenna mask. | |
1019 | * Non-802.11n drivers can derive wether to use diversity or not. | |
1020 | * Drivers may reject configurations or RX/TX mask combinations they cannot | |
1021 | * support by returning -EINVAL. | |
1022 | * | |
1023 | * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. | |
1024 | * This can be used to mask out antennas which are not attached or should | |
1025 | * not be used for receiving. If an antenna is not selected in this bitmap | |
1026 | * the hardware should not be configured to receive on this antenna. | |
25985edc | 1027 | * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. |
afe0cbf8 | 1028 | * |
39fd5de4 BR |
1029 | * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available |
1030 | * for configuration as TX antennas via the above parameters. | |
1031 | * | |
1032 | * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available | |
1033 | * for configuration as RX antennas via the above parameters. | |
1034 | * | |
885a46d0 FF |
1035 | * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS |
1036 | * | |
f7ca38df JB |
1037 | * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be |
1038 | * transmitted on another channel when the channel given doesn't match | |
1039 | * the current channel. If the current channel doesn't match and this | |
1040 | * flag isn't set, the frame will be rejected. This is also used as an | |
1041 | * nl80211 capability flag. | |
1042 | * | |
50b12f59 HS |
1043 | * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16) |
1044 | * | |
dbd2fd65 JB |
1045 | * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags |
1046 | * attributes, specifying what a key should be set as default as. | |
1047 | * See &enum nl80211_key_default_types. | |
1048 | * | |
c80d545d | 1049 | * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be |
45007fd5 JB |
1050 | * changed once the mesh is active. |
1051 | * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute | |
1052 | * containing attributes from &enum nl80211_meshconf_params. | |
15d5dda6 JC |
1053 | * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver |
1054 | * allows auth frames in a mesh to be passed to userspace for processing via | |
1055 | * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. | |
57cf8043 JC |
1056 | * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as |
1057 | * defined in &enum nl80211_plink_state. Used when userspace is | |
1058 | * driving the peer link management state machine. | |
1059 | * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. | |
c80d545d | 1060 | * |
77dbbb13 JB |
1061 | * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy |
1062 | * capabilities, the supported WoWLAN triggers | |
ff1b6e69 JB |
1063 | * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to |
1064 | * indicate which WoW triggers should be enabled. This is also | |
1065 | * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN | |
1066 | * triggers. | |
bbe6ad6d LC |
1067 | |
1068 | * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan | |
1069 | * cycles, in msecs. | |
a1f1c21c LC |
1070 | |
1071 | * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more | |
1072 | * sets of attributes to match during scheduled scans. Only BSSs | |
1073 | * that match any of the sets will be reported. These are | |
1074 | * pass-thru filter rules. | |
1075 | * For a match to succeed, the BSS must match all attributes of a | |
1076 | * set. Since not every hardware supports matching all types of | |
1077 | * attributes, there is no guarantee that the reported BSSs are | |
1078 | * fully complying with the match sets and userspace needs to be | |
1079 | * able to ignore them by itself. | |
1080 | * Thus, the implementation is somewhat hardware-dependent, but | |
1081 | * this is only an optimization and the userspace application | |
1082 | * needs to handle all the non-filtered results anyway. | |
1083 | * If the match attributes don't make sense when combined with | |
1084 | * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID | |
1085 | * is included in the probe request, but the match attributes | |
1086 | * will never let it go through), -EINVAL may be returned. | |
1087 | * If ommited, no filtering is done. | |
ff1b6e69 | 1088 | * |
7527a782 JB |
1089 | * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported |
1090 | * interface combinations. In each nested item, it contains attributes | |
1091 | * defined in &enum nl80211_if_combination_attrs. | |
1092 | * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like | |
1093 | * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that | |
1094 | * are managed in software: interfaces of these types aren't subject to | |
1095 | * any restrictions in their number or combinations. | |
c80d545d | 1096 | * |
e5497d76 JB |
1097 | * @%NL80211_ATTR_REKEY_DATA: nested attribute containing the information |
1098 | * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. | |
1099 | * | |
34850ab2 JB |
1100 | * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, |
1101 | * nested array attribute containing an entry for each band, with the entry | |
1102 | * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but | |
1103 | * without the length restriction (at most %NL80211_MAX_SUPP_RATES). | |
1104 | * | |
32e9de84 JM |
1105 | * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon |
1106 | * and Probe Response (when response to wildcard Probe Request); see | |
1107 | * &enum nl80211_hidden_ssid, represented as a u32 | |
1108 | * | |
9946ecfb JM |
1109 | * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. |
1110 | * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to | |
1111 | * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the | |
1112 | * driver (or firmware) replies to Probe Request frames. | |
1113 | * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association | |
1114 | * Response frames. This is used with %NL80211_CMD_NEW_BEACON and | |
1115 | * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into | |
1116 | * (Re)Association Response frames when the driver (or firmware) replies to | |
1117 | * (Re)Association Request frames. | |
1118 | * | |
c75786c9 EP |
1119 | * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration |
1120 | * of the station, see &enum nl80211_sta_wme_attr. | |
cedb5412 EP |
1121 | * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working |
1122 | * as AP. | |
c75786c9 | 1123 | * |
f4b34b55 VN |
1124 | * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of |
1125 | * roaming to another AP in the same ESS if the signal lever is low. | |
1126 | * | |
c9df56b4 JM |
1127 | * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching |
1128 | * candidate information, see &enum nl80211_pmksa_candidate_attr. | |
1129 | * | |
e9f935e3 RM |
1130 | * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not |
1131 | * for management frames transmission. In order to avoid p2p probe/action | |
1132 | * frames are being transmitted at CCK rate in 2GHz band, the user space | |
1133 | * applications use this attribute. | |
1134 | * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and | |
1135 | * %NL80211_CMD_FRAME commands. | |
1136 | * | |
109086ce AN |
1137 | * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup |
1138 | * request, link setup confirm, link teardown, etc.). Values are | |
1139 | * described in the TDLS (802.11z) specification. | |
1140 | * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a | |
1141 | * TDLS conversation between two devices. | |
1142 | * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see | |
1143 | * &enum nl80211_tdls_operation, represented as a u8. | |
1144 | * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate | |
1145 | * as a TDLS peer sta. | |
1146 | * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown | |
1147 | * procedures should be performed by sending TDLS packets via | |
1148 | * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be | |
1149 | * used for asking the driver to perform a TDLS operation. | |
1150 | * | |
562a7480 JB |
1151 | * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices |
1152 | * that have AP support to indicate that they have the AP SME integrated | |
1153 | * with support for the features listed in this attribute, see | |
1154 | * &enum nl80211_ap_sme_features. | |
1155 | * | |
e247bd90 JB |
1156 | * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells |
1157 | * the driver to not wait for an acknowledgement. Note that due to this, | |
1158 | * it will also not give a status callback nor return a cookie. This is | |
1159 | * mostly useful for probe responses to save airtime. | |
1160 | * | |
1f074bd8 JB |
1161 | * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from |
1162 | * &enum nl80211_feature_flags and is advertised in wiphy information. | |
87bbbe22 AN |
1163 | * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe |
1164 | * | |
1165 | * requests while operating in AP-mode. | |
1166 | * This attribute holds a bitmap of the supported protocols for | |
1167 | * offloading (see &enum nl80211_probe_resp_offload_support_attr). | |
1f074bd8 | 1168 | * |
00f740e1 AN |
1169 | * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire |
1170 | * probe-response frame. The DA field in the 802.11 header is zero-ed out, | |
1171 | * to be filled by the FW. | |
1172 | * | |
55682965 JB |
1173 | * @NL80211_ATTR_MAX: highest attribute number currently defined |
1174 | * @__NL80211_ATTR_AFTER_LAST: internal use | |
1175 | */ | |
1176 | enum nl80211_attrs { | |
25985edc | 1177 | /* don't change the order or add anything between, this is ABI! */ |
55682965 JB |
1178 | NL80211_ATTR_UNSPEC, |
1179 | ||
1180 | NL80211_ATTR_WIPHY, | |
1181 | NL80211_ATTR_WIPHY_NAME, | |
1182 | ||
1183 | NL80211_ATTR_IFINDEX, | |
1184 | NL80211_ATTR_IFNAME, | |
1185 | NL80211_ATTR_IFTYPE, | |
1186 | ||
41ade00f JB |
1187 | NL80211_ATTR_MAC, |
1188 | ||
1189 | NL80211_ATTR_KEY_DATA, | |
1190 | NL80211_ATTR_KEY_IDX, | |
1191 | NL80211_ATTR_KEY_CIPHER, | |
1192 | NL80211_ATTR_KEY_SEQ, | |
1193 | NL80211_ATTR_KEY_DEFAULT, | |
1194 | ||
ed1b6cc7 JB |
1195 | NL80211_ATTR_BEACON_INTERVAL, |
1196 | NL80211_ATTR_DTIM_PERIOD, | |
1197 | NL80211_ATTR_BEACON_HEAD, | |
1198 | NL80211_ATTR_BEACON_TAIL, | |
1199 | ||
5727ef1b JB |
1200 | NL80211_ATTR_STA_AID, |
1201 | NL80211_ATTR_STA_FLAGS, | |
1202 | NL80211_ATTR_STA_LISTEN_INTERVAL, | |
1203 | NL80211_ATTR_STA_SUPPORTED_RATES, | |
1204 | NL80211_ATTR_STA_VLAN, | |
2ec600d6 | 1205 | NL80211_ATTR_STA_INFO, |
5727ef1b | 1206 | |
ee688b00 JB |
1207 | NL80211_ATTR_WIPHY_BANDS, |
1208 | ||
66f7ac50 MW |
1209 | NL80211_ATTR_MNTR_FLAGS, |
1210 | ||
2ec600d6 LCC |
1211 | NL80211_ATTR_MESH_ID, |
1212 | NL80211_ATTR_STA_PLINK_ACTION, | |
1213 | NL80211_ATTR_MPATH_NEXT_HOP, | |
1214 | NL80211_ATTR_MPATH_INFO, | |
1215 | ||
9f1ba906 JM |
1216 | NL80211_ATTR_BSS_CTS_PROT, |
1217 | NL80211_ATTR_BSS_SHORT_PREAMBLE, | |
1218 | NL80211_ATTR_BSS_SHORT_SLOT_TIME, | |
1219 | ||
36aedc90 JM |
1220 | NL80211_ATTR_HT_CAPABILITY, |
1221 | ||
f59ac048 LR |
1222 | NL80211_ATTR_SUPPORTED_IFTYPES, |
1223 | ||
b2e1b302 LR |
1224 | NL80211_ATTR_REG_ALPHA2, |
1225 | NL80211_ATTR_REG_RULES, | |
1226 | ||
24bdd9f4 | 1227 | NL80211_ATTR_MESH_CONFIG, |
93da9cc1 | 1228 | |
90c97a04 JM |
1229 | NL80211_ATTR_BSS_BASIC_RATES, |
1230 | ||
31888487 | 1231 | NL80211_ATTR_WIPHY_TXQ_PARAMS, |
72bdcf34 | 1232 | NL80211_ATTR_WIPHY_FREQ, |
094d05dc | 1233 | NL80211_ATTR_WIPHY_CHANNEL_TYPE, |
31888487 | 1234 | |
3cfcf6ac JM |
1235 | NL80211_ATTR_KEY_DEFAULT_MGMT, |
1236 | ||
9aed3cc1 JM |
1237 | NL80211_ATTR_MGMT_SUBTYPE, |
1238 | NL80211_ATTR_IE, | |
1239 | ||
2a519311 JB |
1240 | NL80211_ATTR_MAX_NUM_SCAN_SSIDS, |
1241 | ||
1242 | NL80211_ATTR_SCAN_FREQUENCIES, | |
1243 | NL80211_ATTR_SCAN_SSIDS, | |
f5ea9120 | 1244 | NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ |
2a519311 JB |
1245 | NL80211_ATTR_BSS, |
1246 | ||
73d54c9e LR |
1247 | NL80211_ATTR_REG_INITIATOR, |
1248 | NL80211_ATTR_REG_TYPE, | |
1249 | ||
8fdc621d JB |
1250 | NL80211_ATTR_SUPPORTED_COMMANDS, |
1251 | ||
6039f6d2 | 1252 | NL80211_ATTR_FRAME, |
636a5d36 JM |
1253 | NL80211_ATTR_SSID, |
1254 | NL80211_ATTR_AUTH_TYPE, | |
1255 | NL80211_ATTR_REASON_CODE, | |
6039f6d2 | 1256 | |
a3b8b056 JM |
1257 | NL80211_ATTR_KEY_TYPE, |
1258 | ||
18a83659 | 1259 | NL80211_ATTR_MAX_SCAN_IE_LEN, |
25e47c18 | 1260 | NL80211_ATTR_CIPHER_SUITES, |
18a83659 | 1261 | |
6bad8766 LR |
1262 | NL80211_ATTR_FREQ_BEFORE, |
1263 | NL80211_ATTR_FREQ_AFTER, | |
04a773ad JB |
1264 | |
1265 | NL80211_ATTR_FREQ_FIXED, | |
1266 | ||
b9a5f8ca JM |
1267 | |
1268 | NL80211_ATTR_WIPHY_RETRY_SHORT, | |
1269 | NL80211_ATTR_WIPHY_RETRY_LONG, | |
1270 | NL80211_ATTR_WIPHY_FRAG_THRESHOLD, | |
1271 | NL80211_ATTR_WIPHY_RTS_THRESHOLD, | |
1272 | ||
1965c853 JM |
1273 | NL80211_ATTR_TIMED_OUT, |
1274 | ||
dc6382ce JM |
1275 | NL80211_ATTR_USE_MFP, |
1276 | ||
eccb8e8f JB |
1277 | NL80211_ATTR_STA_FLAGS2, |
1278 | ||
3f77316c JM |
1279 | NL80211_ATTR_CONTROL_PORT, |
1280 | ||
aff89a9b JB |
1281 | NL80211_ATTR_TESTDATA, |
1282 | ||
b23aa676 SO |
1283 | NL80211_ATTR_PRIVACY, |
1284 | ||
1285 | NL80211_ATTR_DISCONNECTED_BY_AP, | |
1286 | NL80211_ATTR_STATUS_CODE, | |
1287 | ||
1288 | NL80211_ATTR_CIPHER_SUITES_PAIRWISE, | |
1289 | NL80211_ATTR_CIPHER_SUITE_GROUP, | |
1290 | NL80211_ATTR_WPA_VERSIONS, | |
1291 | NL80211_ATTR_AKM_SUITES, | |
1292 | ||
1293 | NL80211_ATTR_REQ_IE, | |
1294 | NL80211_ATTR_RESP_IE, | |
1295 | ||
3e5d7649 JB |
1296 | NL80211_ATTR_PREV_BSSID, |
1297 | ||
b9454e83 | 1298 | NL80211_ATTR_KEY, |
fffd0934 | 1299 | NL80211_ATTR_KEYS, |
b9454e83 | 1300 | |
463d0183 JB |
1301 | NL80211_ATTR_PID, |
1302 | ||
8b787643 FF |
1303 | NL80211_ATTR_4ADDR, |
1304 | ||
61fa713c HS |
1305 | NL80211_ATTR_SURVEY_INFO, |
1306 | ||
67fbb16b SO |
1307 | NL80211_ATTR_PMKID, |
1308 | NL80211_ATTR_MAX_NUM_PMKIDS, | |
1309 | ||
9588bbd5 JM |
1310 | NL80211_ATTR_DURATION, |
1311 | ||
1312 | NL80211_ATTR_COOKIE, | |
1313 | ||
81077e82 LT |
1314 | NL80211_ATTR_WIPHY_COVERAGE_CLASS, |
1315 | ||
13ae75b1 JM |
1316 | NL80211_ATTR_TX_RATES, |
1317 | ||
026331c4 JM |
1318 | NL80211_ATTR_FRAME_MATCH, |
1319 | ||
1320 | NL80211_ATTR_ACK, | |
1321 | ||
ffb9eb3d KV |
1322 | NL80211_ATTR_PS_STATE, |
1323 | ||
d6dc1a38 JO |
1324 | NL80211_ATTR_CQM, |
1325 | ||
d5cdfacb JM |
1326 | NL80211_ATTR_LOCAL_STATE_CHANGE, |
1327 | ||
fd8aaaf3 FF |
1328 | NL80211_ATTR_AP_ISOLATE, |
1329 | ||
98d2ff8b JO |
1330 | NL80211_ATTR_WIPHY_TX_POWER_SETTING, |
1331 | NL80211_ATTR_WIPHY_TX_POWER_LEVEL, | |
1332 | ||
2e161f78 JB |
1333 | NL80211_ATTR_TX_FRAME_TYPES, |
1334 | NL80211_ATTR_RX_FRAME_TYPES, | |
1335 | NL80211_ATTR_FRAME_TYPE, | |
1336 | ||
c0692b8f JB |
1337 | NL80211_ATTR_CONTROL_PORT_ETHERTYPE, |
1338 | NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, | |
1339 | ||
e31b8213 JB |
1340 | NL80211_ATTR_SUPPORT_IBSS_RSN, |
1341 | ||
afe0cbf8 BR |
1342 | NL80211_ATTR_WIPHY_ANTENNA_TX, |
1343 | NL80211_ATTR_WIPHY_ANTENNA_RX, | |
1344 | ||
885a46d0 FF |
1345 | NL80211_ATTR_MCAST_RATE, |
1346 | ||
f7ca38df JB |
1347 | NL80211_ATTR_OFFCHANNEL_TX_OK, |
1348 | ||
50b12f59 HS |
1349 | NL80211_ATTR_BSS_HT_OPMODE, |
1350 | ||
dbd2fd65 JB |
1351 | NL80211_ATTR_KEY_DEFAULT_TYPES, |
1352 | ||
a293911d JB |
1353 | NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, |
1354 | ||
c80d545d JC |
1355 | NL80211_ATTR_MESH_SETUP, |
1356 | ||
39fd5de4 BR |
1357 | NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, |
1358 | NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, | |
1359 | ||
15d5dda6 | 1360 | NL80211_ATTR_SUPPORT_MESH_AUTH, |
9c3990aa | 1361 | NL80211_ATTR_STA_PLINK_STATE, |
15d5dda6 | 1362 | |
ff1b6e69 JB |
1363 | NL80211_ATTR_WOWLAN_TRIGGERS, |
1364 | NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, | |
1365 | ||
bbe6ad6d LC |
1366 | NL80211_ATTR_SCHED_SCAN_INTERVAL, |
1367 | ||
7527a782 JB |
1368 | NL80211_ATTR_INTERFACE_COMBINATIONS, |
1369 | NL80211_ATTR_SOFTWARE_IFTYPES, | |
15d5dda6 | 1370 | |
e5497d76 JB |
1371 | NL80211_ATTR_REKEY_DATA, |
1372 | ||
93b6aa69 | 1373 | NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, |
5a865bad | 1374 | NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, |
93b6aa69 | 1375 | |
34850ab2 JB |
1376 | NL80211_ATTR_SCAN_SUPP_RATES, |
1377 | ||
32e9de84 JM |
1378 | NL80211_ATTR_HIDDEN_SSID, |
1379 | ||
9946ecfb JM |
1380 | NL80211_ATTR_IE_PROBE_RESP, |
1381 | NL80211_ATTR_IE_ASSOC_RESP, | |
1382 | ||
c75786c9 | 1383 | NL80211_ATTR_STA_WME, |
cedb5412 | 1384 | NL80211_ATTR_SUPPORT_AP_UAPSD, |
c75786c9 | 1385 | |
f4b34b55 VN |
1386 | NL80211_ATTR_ROAM_SUPPORT, |
1387 | ||
a1f1c21c LC |
1388 | NL80211_ATTR_SCHED_SCAN_MATCH, |
1389 | NL80211_ATTR_MAX_MATCH_SETS, | |
1390 | ||
c9df56b4 JM |
1391 | NL80211_ATTR_PMKSA_CANDIDATE, |
1392 | ||
e9f935e3 RM |
1393 | NL80211_ATTR_TX_NO_CCK_RATE, |
1394 | ||
109086ce AN |
1395 | NL80211_ATTR_TDLS_ACTION, |
1396 | NL80211_ATTR_TDLS_DIALOG_TOKEN, | |
1397 | NL80211_ATTR_TDLS_OPERATION, | |
1398 | NL80211_ATTR_TDLS_SUPPORT, | |
1399 | NL80211_ATTR_TDLS_EXTERNAL_SETUP, | |
1400 | ||
562a7480 JB |
1401 | NL80211_ATTR_DEVICE_AP_SME, |
1402 | ||
e247bd90 JB |
1403 | NL80211_ATTR_DONT_WAIT_FOR_ACK, |
1404 | ||
1f074bd8 JB |
1405 | NL80211_ATTR_FEATURE_FLAGS, |
1406 | ||
87bbbe22 AN |
1407 | NL80211_ATTR_PROBE_RESP_OFFLOAD, |
1408 | ||
00f740e1 AN |
1409 | NL80211_ATTR_PROBE_RESP, |
1410 | ||
564d9bdd MB |
1411 | /* add attributes here, update the policy in nl80211.c */ |
1412 | ||
55682965 JB |
1413 | __NL80211_ATTR_AFTER_LAST, |
1414 | NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 | |
1415 | }; | |
1416 | ||
f5ea9120 JB |
1417 | /* source-level API compatibility */ |
1418 | #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION | |
24bdd9f4 | 1419 | #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG |
f5ea9120 | 1420 | |
36aedc90 JM |
1421 | /* |
1422 | * Allow user space programs to use #ifdef on new attributes by defining them | |
1423 | * here | |
1424 | */ | |
b23aa676 | 1425 | #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT |
36aedc90 | 1426 | #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY |
90c97a04 | 1427 | #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES |
31888487 | 1428 | #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS |
72bdcf34 | 1429 | #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ |
d03415e6 | 1430 | #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE |
9aed3cc1 JM |
1431 | #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE |
1432 | #define NL80211_ATTR_IE NL80211_ATTR_IE | |
73d54c9e LR |
1433 | #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR |
1434 | #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE | |
6039f6d2 | 1435 | #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME |
636a5d36 JM |
1436 | #define NL80211_ATTR_SSID NL80211_ATTR_SSID |
1437 | #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE | |
1438 | #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE | |
b23aa676 SO |
1439 | #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE |
1440 | #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP | |
1441 | #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS | |
1442 | #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES | |
b9454e83 | 1443 | #define NL80211_ATTR_KEY NL80211_ATTR_KEY |
fffd0934 | 1444 | #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS |
1f074bd8 | 1445 | #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS |
36aedc90 | 1446 | |
ffd7891d | 1447 | #define NL80211_MAX_SUPP_RATES 32 |
b2e1b302 | 1448 | #define NL80211_MAX_SUPP_REG_RULES 32 |
ffd7891d LR |
1449 | #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 |
1450 | #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 | |
1451 | #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 | |
36aedc90 | 1452 | #define NL80211_HT_CAPABILITY_LEN 26 |
5727ef1b | 1453 | |
b23aa676 SO |
1454 | #define NL80211_MAX_NR_CIPHER_SUITES 5 |
1455 | #define NL80211_MAX_NR_AKM_SUITES 2 | |
1456 | ||
704232c2 JB |
1457 | /** |
1458 | * enum nl80211_iftype - (virtual) interface types | |
55682965 | 1459 | * |
704232c2 JB |
1460 | * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides |
1461 | * @NL80211_IFTYPE_ADHOC: independent BSS member | |
1462 | * @NL80211_IFTYPE_STATION: managed BSS member | |
1463 | * @NL80211_IFTYPE_AP: access point | |
7527a782 JB |
1464 | * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces |
1465 | * are a bit special in that they must always be tied to a pre-existing | |
1466 | * AP type interface. | |
704232c2 JB |
1467 | * @NL80211_IFTYPE_WDS: wireless distribution interface |
1468 | * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames | |
2ec600d6 | 1469 | * @NL80211_IFTYPE_MESH_POINT: mesh point |
074ac8df JB |
1470 | * @NL80211_IFTYPE_P2P_CLIENT: P2P client |
1471 | * @NL80211_IFTYPE_P2P_GO: P2P group owner | |
55682965 | 1472 | * @NL80211_IFTYPE_MAX: highest interface type number currently defined |
2e161f78 | 1473 | * @NUM_NL80211_IFTYPES: number of defined interface types |
704232c2 | 1474 | * |
55682965 | 1475 | * These values are used with the %NL80211_ATTR_IFTYPE |
704232c2 JB |
1476 | * to set the type of an interface. |
1477 | * | |
1478 | */ | |
1479 | enum nl80211_iftype { | |
1480 | NL80211_IFTYPE_UNSPECIFIED, | |
1481 | NL80211_IFTYPE_ADHOC, | |
1482 | NL80211_IFTYPE_STATION, | |
1483 | NL80211_IFTYPE_AP, | |
1484 | NL80211_IFTYPE_AP_VLAN, | |
1485 | NL80211_IFTYPE_WDS, | |
1486 | NL80211_IFTYPE_MONITOR, | |
2ec600d6 | 1487 | NL80211_IFTYPE_MESH_POINT, |
074ac8df JB |
1488 | NL80211_IFTYPE_P2P_CLIENT, |
1489 | NL80211_IFTYPE_P2P_GO, | |
704232c2 JB |
1490 | |
1491 | /* keep last */ | |
2e161f78 JB |
1492 | NUM_NL80211_IFTYPES, |
1493 | NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 | |
704232c2 | 1494 | }; |
704232c2 | 1495 | |
5727ef1b JB |
1496 | /** |
1497 | * enum nl80211_sta_flags - station flags | |
1498 | * | |
1499 | * Station flags. When a station is added to an AP interface, it is | |
1500 | * assumed to be already associated (and hence authenticated.) | |
1501 | * | |
2a5fb7b0 | 1502 | * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved |
5727ef1b JB |
1503 | * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) |
1504 | * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames | |
1505 | * with short barker preamble | |
1506 | * @NL80211_STA_FLAG_WME: station is WME/QoS capable | |
5394af4d | 1507 | * @NL80211_STA_FLAG_MFP: station uses management frame protection |
b39c48fa | 1508 | * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated |
07ba55d7 | 1509 | * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer |
2a5fb7b0 JB |
1510 | * @NL80211_STA_FLAG_MAX: highest station flag number currently defined |
1511 | * @__NL80211_STA_FLAG_AFTER_LAST: internal use | |
5727ef1b JB |
1512 | */ |
1513 | enum nl80211_sta_flags { | |
1514 | __NL80211_STA_FLAG_INVALID, | |
1515 | NL80211_STA_FLAG_AUTHORIZED, | |
1516 | NL80211_STA_FLAG_SHORT_PREAMBLE, | |
1517 | NL80211_STA_FLAG_WME, | |
5394af4d | 1518 | NL80211_STA_FLAG_MFP, |
b39c48fa | 1519 | NL80211_STA_FLAG_AUTHENTICATED, |
07ba55d7 | 1520 | NL80211_STA_FLAG_TDLS_PEER, |
5727ef1b JB |
1521 | |
1522 | /* keep last */ | |
1523 | __NL80211_STA_FLAG_AFTER_LAST, | |
1524 | NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 | |
1525 | }; | |
1526 | ||
eccb8e8f JB |
1527 | /** |
1528 | * struct nl80211_sta_flag_update - station flags mask/set | |
1529 | * @mask: mask of station flags to set | |
1530 | * @set: which values to set them to | |
1531 | * | |
1532 | * Both mask and set contain bits as per &enum nl80211_sta_flags. | |
1533 | */ | |
1534 | struct nl80211_sta_flag_update { | |
1535 | __u32 mask; | |
1536 | __u32 set; | |
1537 | } __attribute__((packed)); | |
1538 | ||
420e7fab HR |
1539 | /** |
1540 | * enum nl80211_rate_info - bitrate information | |
1541 | * | |
1542 | * These attribute types are used with %NL80211_STA_INFO_TXRATE | |
1543 | * when getting information about the bitrate of a station. | |
1544 | * | |
1545 | * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved | |
1546 | * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) | |
1547 | * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) | |
1548 | * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate | |
1549 | * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval | |
1550 | * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined | |
1551 | * @__NL80211_RATE_INFO_AFTER_LAST: internal use | |
1552 | */ | |
1553 | enum nl80211_rate_info { | |
1554 | __NL80211_RATE_INFO_INVALID, | |
1555 | NL80211_RATE_INFO_BITRATE, | |
1556 | NL80211_RATE_INFO_MCS, | |
1557 | NL80211_RATE_INFO_40_MHZ_WIDTH, | |
1558 | NL80211_RATE_INFO_SHORT_GI, | |
1559 | ||
1560 | /* keep last */ | |
1561 | __NL80211_RATE_INFO_AFTER_LAST, | |
1562 | NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 | |
1563 | }; | |
1564 | ||
f4263c98 PS |
1565 | /** |
1566 | * enum nl80211_sta_bss_param - BSS information collected by STA | |
1567 | * | |
1568 | * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM | |
1569 | * when getting information about the bitrate of a station. | |
1570 | * | |
1571 | * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved | |
1572 | * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) | |
1573 | * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled | |
1574 | * (flag) | |
1575 | * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled | |
1576 | * (flag) | |
1577 | * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) | |
1578 | * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) | |
1579 | * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined | |
1580 | * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use | |
1581 | */ | |
1582 | enum nl80211_sta_bss_param { | |
1583 | __NL80211_STA_BSS_PARAM_INVALID, | |
1584 | NL80211_STA_BSS_PARAM_CTS_PROT, | |
1585 | NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, | |
1586 | NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, | |
1587 | NL80211_STA_BSS_PARAM_DTIM_PERIOD, | |
1588 | NL80211_STA_BSS_PARAM_BEACON_INTERVAL, | |
1589 | ||
1590 | /* keep last */ | |
1591 | __NL80211_STA_BSS_PARAM_AFTER_LAST, | |
1592 | NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 | |
1593 | }; | |
1594 | ||
fd5b74dc | 1595 | /** |
2ec600d6 | 1596 | * enum nl80211_sta_info - station information |
fd5b74dc | 1597 | * |
2ec600d6 | 1598 | * These attribute types are used with %NL80211_ATTR_STA_INFO |
fd5b74dc JB |
1599 | * when getting information about a station. |
1600 | * | |
2ec600d6 LCC |
1601 | * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved |
1602 | * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) | |
1603 | * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) | |
1604 | * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) | |
420e7fab HR |
1605 | * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) |
1606 | * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute | |
f4263c98 | 1607 | * containing info as possible, see &enum nl80211_rate_info |
98c8a60a JM |
1608 | * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) |
1609 | * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this | |
1610 | * station) | |
b206b4ef BR |
1611 | * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) |
1612 | * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) | |
541a45a1 | 1613 | * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) |
45007fd5 JB |
1614 | * @NL80211_STA_INFO_LLID: the station's mesh LLID |
1615 | * @NL80211_STA_INFO_PLID: the station's mesh PLID | |
1616 | * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station | |
57cf8043 | 1617 | * (see %enum nl80211_plink_state) |
c8dcfd8a FF |
1618 | * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested |
1619 | * attribute, like NL80211_STA_INFO_TX_BITRATE. | |
f4263c98 PS |
1620 | * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute |
1621 | * containing info as possible, see &enum nl80211_sta_bss_param | |
ebe27c91 | 1622 | * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected |
bb6e753e | 1623 | * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. |
45007fd5 JB |
1624 | * @__NL80211_STA_INFO_AFTER_LAST: internal |
1625 | * @NL80211_STA_INFO_MAX: highest possible station info attribute | |
2ec600d6 LCC |
1626 | */ |
1627 | enum nl80211_sta_info { | |
1628 | __NL80211_STA_INFO_INVALID, | |
1629 | NL80211_STA_INFO_INACTIVE_TIME, | |
1630 | NL80211_STA_INFO_RX_BYTES, | |
1631 | NL80211_STA_INFO_TX_BYTES, | |
1632 | NL80211_STA_INFO_LLID, | |
1633 | NL80211_STA_INFO_PLID, | |
1634 | NL80211_STA_INFO_PLINK_STATE, | |
420e7fab HR |
1635 | NL80211_STA_INFO_SIGNAL, |
1636 | NL80211_STA_INFO_TX_BITRATE, | |
98c8a60a JM |
1637 | NL80211_STA_INFO_RX_PACKETS, |
1638 | NL80211_STA_INFO_TX_PACKETS, | |
b206b4ef BR |
1639 | NL80211_STA_INFO_TX_RETRIES, |
1640 | NL80211_STA_INFO_TX_FAILED, | |
541a45a1 | 1641 | NL80211_STA_INFO_SIGNAL_AVG, |
c8dcfd8a | 1642 | NL80211_STA_INFO_RX_BITRATE, |
f4263c98 | 1643 | NL80211_STA_INFO_BSS_PARAM, |
ebe27c91 | 1644 | NL80211_STA_INFO_CONNECTED_TIME, |
bb6e753e | 1645 | NL80211_STA_INFO_STA_FLAGS, |
2ec600d6 LCC |
1646 | |
1647 | /* keep last */ | |
1648 | __NL80211_STA_INFO_AFTER_LAST, | |
1649 | NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 | |
1650 | }; | |
1651 | ||
1652 | /** | |
1653 | * enum nl80211_mpath_flags - nl80211 mesh path flags | |
1654 | * | |
1655 | * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active | |
1656 | * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running | |
d19b3bf6 | 1657 | * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN |
2ec600d6 LCC |
1658 | * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set |
1659 | * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded | |
1660 | */ | |
1661 | enum nl80211_mpath_flags { | |
1662 | NL80211_MPATH_FLAG_ACTIVE = 1<<0, | |
1663 | NL80211_MPATH_FLAG_RESOLVING = 1<<1, | |
d19b3bf6 | 1664 | NL80211_MPATH_FLAG_SN_VALID = 1<<2, |
2ec600d6 LCC |
1665 | NL80211_MPATH_FLAG_FIXED = 1<<3, |
1666 | NL80211_MPATH_FLAG_RESOLVED = 1<<4, | |
1667 | }; | |
1668 | ||
1669 | /** | |
1670 | * enum nl80211_mpath_info - mesh path information | |
1671 | * | |
1672 | * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting | |
1673 | * information about a mesh path. | |
1674 | * | |
1675 | * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved | |
2a5fb7b0 JB |
1676 | * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination |
1677 | * @NL80211_MPATH_INFO_SN: destination sequence number | |
1678 | * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path | |
1679 | * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now | |
1680 | * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in | |
2ec600d6 | 1681 | * &enum nl80211_mpath_flags; |
2a5fb7b0 JB |
1682 | * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec |
1683 | * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries | |
1684 | * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number | |
1685 | * currently defind | |
1686 | * @__NL80211_MPATH_INFO_AFTER_LAST: internal use | |
fd5b74dc | 1687 | */ |
2ec600d6 LCC |
1688 | enum nl80211_mpath_info { |
1689 | __NL80211_MPATH_INFO_INVALID, | |
1690 | NL80211_MPATH_INFO_FRAME_QLEN, | |
d19b3bf6 | 1691 | NL80211_MPATH_INFO_SN, |
2ec600d6 LCC |
1692 | NL80211_MPATH_INFO_METRIC, |
1693 | NL80211_MPATH_INFO_EXPTIME, | |
1694 | NL80211_MPATH_INFO_FLAGS, | |
1695 | NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, | |
1696 | NL80211_MPATH_INFO_DISCOVERY_RETRIES, | |
fd5b74dc JB |
1697 | |
1698 | /* keep last */ | |
2ec600d6 LCC |
1699 | __NL80211_MPATH_INFO_AFTER_LAST, |
1700 | NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 | |
fd5b74dc JB |
1701 | }; |
1702 | ||
ee688b00 JB |
1703 | /** |
1704 | * enum nl80211_band_attr - band attributes | |
1705 | * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved | |
1706 | * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, | |
1707 | * an array of nested frequency attributes | |
1708 | * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, | |
1709 | * an array of nested bitrate attributes | |
d51626df JB |
1710 | * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as |
1711 | * defined in 802.11n | |
1712 | * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE | |
1713 | * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n | |
1714 | * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n | |
2a5fb7b0 JB |
1715 | * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined |
1716 | * @__NL80211_BAND_ATTR_AFTER_LAST: internal use | |
ee688b00 JB |
1717 | */ |
1718 | enum nl80211_band_attr { | |
1719 | __NL80211_BAND_ATTR_INVALID, | |
1720 | NL80211_BAND_ATTR_FREQS, | |
1721 | NL80211_BAND_ATTR_RATES, | |
1722 | ||
d51626df JB |
1723 | NL80211_BAND_ATTR_HT_MCS_SET, |
1724 | NL80211_BAND_ATTR_HT_CAPA, | |
1725 | NL80211_BAND_ATTR_HT_AMPDU_FACTOR, | |
1726 | NL80211_BAND_ATTR_HT_AMPDU_DENSITY, | |
1727 | ||
ee688b00 JB |
1728 | /* keep last */ |
1729 | __NL80211_BAND_ATTR_AFTER_LAST, | |
1730 | NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 | |
1731 | }; | |
1732 | ||
d51626df JB |
1733 | #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA |
1734 | ||
ee688b00 JB |
1735 | /** |
1736 | * enum nl80211_frequency_attr - frequency attributes | |
2a5fb7b0 | 1737 | * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved |
ee688b00 JB |
1738 | * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz |
1739 | * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current | |
1740 | * regulatory domain. | |
1741 | * @NL80211_FREQUENCY_ATTR_PASSIVE_SCAN: Only passive scanning is | |
1742 | * permitted on this channel in current regulatory domain. | |
1743 | * @NL80211_FREQUENCY_ATTR_NO_IBSS: IBSS networks are not permitted | |
1744 | * on this channel in current regulatory domain. | |
1745 | * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory | |
1746 | * on this channel in current regulatory domain. | |
bf8c1ac6 JM |
1747 | * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm |
1748 | * (100 * dBm). | |
2a5fb7b0 JB |
1749 | * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number |
1750 | * currently defined | |
1751 | * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use | |
ee688b00 JB |
1752 | */ |
1753 | enum nl80211_frequency_attr { | |
1754 | __NL80211_FREQUENCY_ATTR_INVALID, | |
1755 | NL80211_FREQUENCY_ATTR_FREQ, | |
1756 | NL80211_FREQUENCY_ATTR_DISABLED, | |
1757 | NL80211_FREQUENCY_ATTR_PASSIVE_SCAN, | |
1758 | NL80211_FREQUENCY_ATTR_NO_IBSS, | |
1759 | NL80211_FREQUENCY_ATTR_RADAR, | |
e2f367f2 | 1760 | NL80211_FREQUENCY_ATTR_MAX_TX_POWER, |
ee688b00 JB |
1761 | |
1762 | /* keep last */ | |
1763 | __NL80211_FREQUENCY_ATTR_AFTER_LAST, | |
1764 | NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 | |
1765 | }; | |
1766 | ||
e2f367f2 JM |
1767 | #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER |
1768 | ||
ee688b00 JB |
1769 | /** |
1770 | * enum nl80211_bitrate_attr - bitrate attributes | |
2a5fb7b0 | 1771 | * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved |
ee688b00 JB |
1772 | * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps |
1773 | * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported | |
1774 | * in 2.4 GHz band. | |
2a5fb7b0 JB |
1775 | * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number |
1776 | * currently defined | |
1777 | * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use | |
ee688b00 JB |
1778 | */ |
1779 | enum nl80211_bitrate_attr { | |
1780 | __NL80211_BITRATE_ATTR_INVALID, | |
1781 | NL80211_BITRATE_ATTR_RATE, | |
1782 | NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, | |
1783 | ||
1784 | /* keep last */ | |
1785 | __NL80211_BITRATE_ATTR_AFTER_LAST, | |
1786 | NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 | |
1787 | }; | |
1788 | ||
7db90f4a LR |
1789 | /** |
1790 | * enum nl80211_initiator - Indicates the initiator of a reg domain request | |
1791 | * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world | |
1792 | * regulatory domain. | |
1793 | * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the | |
1794 | * regulatory domain. | |
1795 | * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the | |
1796 | * wireless core it thinks its knows the regulatory domain we should be in. | |
1797 | * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an | |
1798 | * 802.11 country information element with regulatory information it | |
ca4ffe8f LR |
1799 | * thinks we should consider. cfg80211 only processes the country |
1800 | * code from the IE, and relies on the regulatory domain information | |
25985edc | 1801 | * structure passed by userspace (CRDA) from our wireless-regdb. |
ca4ffe8f LR |
1802 | * If a channel is enabled but the country code indicates it should |
1803 | * be disabled we disable the channel and re-enable it upon disassociation. | |
7db90f4a LR |
1804 | */ |
1805 | enum nl80211_reg_initiator { | |
1806 | NL80211_REGDOM_SET_BY_CORE, | |
1807 | NL80211_REGDOM_SET_BY_USER, | |
1808 | NL80211_REGDOM_SET_BY_DRIVER, | |
1809 | NL80211_REGDOM_SET_BY_COUNTRY_IE, | |
1810 | }; | |
1811 | ||
73d54c9e LR |
1812 | /** |
1813 | * enum nl80211_reg_type - specifies the type of regulatory domain | |
1814 | * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains | |
1815 | * to a specific country. When this is set you can count on the | |
1816 | * ISO / IEC 3166 alpha2 country code being valid. | |
1817 | * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory | |
1818 | * domain. | |
1819 | * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom | |
1820 | * driver specific world regulatory domain. These do not apply system-wide | |
1821 | * and are only applicable to the individual devices which have requested | |
1822 | * them to be applied. | |
1823 | * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product | |
1824 | * of an intersection between two regulatory domains -- the previously | |
1825 | * set regulatory domain on the system and the last accepted regulatory | |
1826 | * domain request to be processed. | |
1827 | */ | |
1828 | enum nl80211_reg_type { | |
1829 | NL80211_REGDOM_TYPE_COUNTRY, | |
1830 | NL80211_REGDOM_TYPE_WORLD, | |
1831 | NL80211_REGDOM_TYPE_CUSTOM_WORLD, | |
1832 | NL80211_REGDOM_TYPE_INTERSECTION, | |
1833 | }; | |
1834 | ||
b2e1b302 LR |
1835 | /** |
1836 | * enum nl80211_reg_rule_attr - regulatory rule attributes | |
2a5fb7b0 | 1837 | * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved |
b2e1b302 LR |
1838 | * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional |
1839 | * considerations for a given frequency range. These are the | |
1840 | * &enum nl80211_reg_rule_flags. | |
1841 | * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory | |
1842 | * rule in KHz. This is not a center of frequency but an actual regulatory | |
1843 | * band edge. | |
1844 | * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule | |
1845 | * in KHz. This is not a center a frequency but an actual regulatory | |
1846 | * band edge. | |
1847 | * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this | |
1848 | * frequency range, in KHz. | |
1849 | * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain | |
1850 | * for a given frequency range. The value is in mBi (100 * dBi). | |
1851 | * If you don't have one then don't send this. | |
1852 | * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for | |
1853 | * a given frequency range. The value is in mBm (100 * dBm). | |
2a5fb7b0 JB |
1854 | * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number |
1855 | * currently defined | |
1856 | * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use | |
b2e1b302 LR |
1857 | */ |
1858 | enum nl80211_reg_rule_attr { | |
1859 | __NL80211_REG_RULE_ATTR_INVALID, | |
1860 | NL80211_ATTR_REG_RULE_FLAGS, | |
1861 | ||
1862 | NL80211_ATTR_FREQ_RANGE_START, | |
1863 | NL80211_ATTR_FREQ_RANGE_END, | |
1864 | NL80211_ATTR_FREQ_RANGE_MAX_BW, | |
1865 | ||
1866 | NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, | |
1867 | NL80211_ATTR_POWER_RULE_MAX_EIRP, | |
1868 | ||
1869 | /* keep last */ | |
1870 | __NL80211_REG_RULE_ATTR_AFTER_LAST, | |
1871 | NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 | |
1872 | }; | |
1873 | ||
a1f1c21c LC |
1874 | /** |
1875 | * enum nl80211_sched_scan_match_attr - scheduled scan match attributes | |
1876 | * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved | |
1877 | * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, | |
1878 | * only report BSS with matching SSID. | |
1879 | * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter | |
1880 | * attribute number currently defined | |
1881 | * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use | |
1882 | */ | |
1883 | enum nl80211_sched_scan_match_attr { | |
1884 | __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, | |
1885 | ||
1886 | NL80211_ATTR_SCHED_SCAN_MATCH_SSID, | |
1887 | ||
1888 | /* keep last */ | |
1889 | __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, | |
1890 | NL80211_SCHED_SCAN_MATCH_ATTR_MAX = | |
1891 | __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 | |
1892 | }; | |
1893 | ||
b2e1b302 LR |
1894 | /** |
1895 | * enum nl80211_reg_rule_flags - regulatory rule flags | |
1896 | * | |
1897 | * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed | |
1898 | * @NL80211_RRF_NO_CCK: CCK modulation not allowed | |
1899 | * @NL80211_RRF_NO_INDOOR: indoor operation not allowed | |
1900 | * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed | |
1901 | * @NL80211_RRF_DFS: DFS support is required to be used | |
1902 | * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links | |
1903 | * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links | |
1904 | * @NL80211_RRF_PASSIVE_SCAN: passive scan is required | |
1905 | * @NL80211_RRF_NO_IBSS: no IBSS is allowed | |
1906 | */ | |
1907 | enum nl80211_reg_rule_flags { | |
1908 | NL80211_RRF_NO_OFDM = 1<<0, | |
1909 | NL80211_RRF_NO_CCK = 1<<1, | |
1910 | NL80211_RRF_NO_INDOOR = 1<<2, | |
1911 | NL80211_RRF_NO_OUTDOOR = 1<<3, | |
1912 | NL80211_RRF_DFS = 1<<4, | |
1913 | NL80211_RRF_PTP_ONLY = 1<<5, | |
1914 | NL80211_RRF_PTMP_ONLY = 1<<6, | |
1915 | NL80211_RRF_PASSIVE_SCAN = 1<<7, | |
1916 | NL80211_RRF_NO_IBSS = 1<<8, | |
1917 | }; | |
1918 | ||
61fa713c HS |
1919 | /** |
1920 | * enum nl80211_survey_info - survey information | |
1921 | * | |
1922 | * These attribute types are used with %NL80211_ATTR_SURVEY_INFO | |
1923 | * when getting information about a survey. | |
1924 | * | |
1925 | * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved | |
1926 | * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel | |
1927 | * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) | |
17e5a808 | 1928 | * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used |
8610c29a FF |
1929 | * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio |
1930 | * spent on this channel | |
1931 | * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary | |
1932 | * channel was sensed busy (either due to activity or energy detect) | |
1933 | * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension | |
1934 | * channel was sensed busy | |
1935 | * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent | |
1936 | * receiving data | |
1937 | * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent | |
1938 | * transmitting data | |
2a5fb7b0 JB |
1939 | * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number |
1940 | * currently defined | |
1941 | * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use | |
61fa713c HS |
1942 | */ |
1943 | enum nl80211_survey_info { | |
1944 | __NL80211_SURVEY_INFO_INVALID, | |
1945 | NL80211_SURVEY_INFO_FREQUENCY, | |
1946 | NL80211_SURVEY_INFO_NOISE, | |
17e5a808 | 1947 | NL80211_SURVEY_INFO_IN_USE, |
8610c29a FF |
1948 | NL80211_SURVEY_INFO_CHANNEL_TIME, |
1949 | NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, | |
1950 | NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, | |
1951 | NL80211_SURVEY_INFO_CHANNEL_TIME_RX, | |
1952 | NL80211_SURVEY_INFO_CHANNEL_TIME_TX, | |
61fa713c HS |
1953 | |
1954 | /* keep last */ | |
1955 | __NL80211_SURVEY_INFO_AFTER_LAST, | |
1956 | NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 | |
1957 | }; | |
1958 | ||
66f7ac50 MW |
1959 | /** |
1960 | * enum nl80211_mntr_flags - monitor configuration flags | |
1961 | * | |
1962 | * Monitor configuration flags. | |
1963 | * | |
1964 | * @__NL80211_MNTR_FLAG_INVALID: reserved | |
1965 | * | |
1966 | * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS | |
1967 | * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP | |
1968 | * @NL80211_MNTR_FLAG_CONTROL: pass control frames | |
1969 | * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering | |
1970 | * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. | |
1971 | * overrides all other flags. | |
1972 | * | |
1973 | * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use | |
1974 | * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag | |
1975 | */ | |
1976 | enum nl80211_mntr_flags { | |
1977 | __NL80211_MNTR_FLAG_INVALID, | |
1978 | NL80211_MNTR_FLAG_FCSFAIL, | |
1979 | NL80211_MNTR_FLAG_PLCPFAIL, | |
1980 | NL80211_MNTR_FLAG_CONTROL, | |
1981 | NL80211_MNTR_FLAG_OTHER_BSS, | |
1982 | NL80211_MNTR_FLAG_COOK_FRAMES, | |
1983 | ||
1984 | /* keep last */ | |
1985 | __NL80211_MNTR_FLAG_AFTER_LAST, | |
1986 | NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 | |
1987 | }; | |
1988 | ||
93da9cc1 | 1989 | /** |
1990 | * enum nl80211_meshconf_params - mesh configuration parameters | |
1991 | * | |
c80d545d JC |
1992 | * Mesh configuration parameters. These can be changed while the mesh is |
1993 | * active. | |
93da9cc1 | 1994 | * |
1995 | * @__NL80211_MESHCONF_INVALID: internal use | |
1996 | * | |
1997 | * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in | |
1998 | * millisecond units, used by the Peer Link Open message | |
1999 | * | |
25985edc | 2000 | * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in |
93da9cc1 | 2001 | * millisecond units, used by the peer link management to close a peer link |
2002 | * | |
2003 | * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in | |
2004 | * millisecond units | |
2005 | * | |
2006 | * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed | |
2007 | * on this mesh interface | |
2008 | * | |
2009 | * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link | |
2010 | * open retries that can be sent to establish a new peer link instance in a | |
2011 | * mesh | |
2012 | * | |
2013 | * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh | |
2014 | * point. | |
2015 | * | |
2016 | * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically | |
2017 | * open peer links when we detect compatible mesh peers. | |
2018 | * | |
2019 | * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames | |
2020 | * containing a PREQ that an MP can send to a particular destination (path | |
2021 | * target) | |
2022 | * | |
2023 | * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths | |
2024 | * (in milliseconds) | |
2025 | * | |
2026 | * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait | |
2027 | * until giving up on a path discovery (in milliseconds) | |
2028 | * | |
2029 | * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh | |
2030 | * points receiving a PREQ shall consider the forwarding information from the | |
2031 | * root to be valid. (TU = time unit) | |
2032 | * | |
2033 | * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in | |
2034 | * TUs) during which an MP can send only one action frame containing a PREQ | |
2035 | * reference element | |
2036 | * | |
2037 | * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) | |
2038 | * that it takes for an HWMP information element to propagate across the mesh | |
2039 | * | |
45007fd5 | 2040 | * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not |
63c5723b | 2041 | * |
c80d545d JC |
2042 | * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a |
2043 | * source mesh point for path selection elements. | |
2044 | * | |
0507e159 JC |
2045 | * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between |
2046 | * root announcements are transmitted. | |
2047 | * | |
16dd7267 JC |
2048 | * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has |
2049 | * access to a broader network beyond the MBSS. This is done via Root | |
2050 | * Announcement frames. | |
2051 | * | |
93da9cc1 | 2052 | * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute |
2053 | * | |
2054 | * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use | |
2055 | */ | |
2056 | enum nl80211_meshconf_params { | |
2057 | __NL80211_MESHCONF_INVALID, | |
2058 | NL80211_MESHCONF_RETRY_TIMEOUT, | |
2059 | NL80211_MESHCONF_CONFIRM_TIMEOUT, | |
2060 | NL80211_MESHCONF_HOLDING_TIMEOUT, | |
2061 | NL80211_MESHCONF_MAX_PEER_LINKS, | |
2062 | NL80211_MESHCONF_MAX_RETRIES, | |
2063 | NL80211_MESHCONF_TTL, | |
2064 | NL80211_MESHCONF_AUTO_OPEN_PLINKS, | |
2065 | NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, | |
2066 | NL80211_MESHCONF_PATH_REFRESH_TIME, | |
2067 | NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, | |
2068 | NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, | |
2069 | NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, | |
2070 | NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, | |
63c5723b | 2071 | NL80211_MESHCONF_HWMP_ROOTMODE, |
45904f21 | 2072 | NL80211_MESHCONF_ELEMENT_TTL, |
0507e159 | 2073 | NL80211_MESHCONF_HWMP_RANN_INTERVAL, |
16dd7267 | 2074 | NL80211_MESHCONF_GATE_ANNOUNCEMENTS, |
93da9cc1 | 2075 | |
2076 | /* keep last */ | |
2077 | __NL80211_MESHCONF_ATTR_AFTER_LAST, | |
2078 | NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 | |
2079 | }; | |
2080 | ||
c80d545d JC |
2081 | /** |
2082 | * enum nl80211_mesh_setup_params - mesh setup parameters | |
2083 | * | |
2084 | * Mesh setup parameters. These are used to start/join a mesh and cannot be | |
2085 | * changed while the mesh is active. | |
2086 | * | |
2087 | * @__NL80211_MESH_SETUP_INVALID: Internal use | |
2088 | * | |
2089 | * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a | |
2090 | * vendor specific path selection algorithm or disable it to use the default | |
2091 | * HWMP. | |
2092 | * | |
2093 | * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a | |
2094 | * vendor specific path metric or disable it to use the default Airtime | |
2095 | * metric. | |
2096 | * | |
581a8b0f JC |
2097 | * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a |
2098 | * robust security network ie, or a vendor specific information element that | |
2099 | * vendors will use to identify the path selection methods and metrics in use. | |
c80d545d | 2100 | * |
15d5dda6 JC |
2101 | * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication |
2102 | * daemon will be authenticating mesh candidates. | |
c80d545d | 2103 | * |
b130e5ce JC |
2104 | * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication |
2105 | * daemon will be securing peer link frames. AMPE is a secured version of Mesh | |
2106 | * Peering Management (MPM) and is implemented with the assistance of a | |
2107 | * userspace daemon. When this flag is set, the kernel will send peer | |
2108 | * management frames to a userspace daemon that will implement AMPE | |
2109 | * functionality (security capabilities selection, key confirmation, and key | |
2110 | * management). When the flag is unset (default), the kernel can autonomously | |
2111 | * complete (unsecured) mesh peering without the need of a userspace daemon. | |
2112 | * | |
45007fd5 | 2113 | * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number |
c80d545d JC |
2114 | * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use |
2115 | */ | |
2116 | enum nl80211_mesh_setup_params { | |
2117 | __NL80211_MESH_SETUP_INVALID, | |
2118 | NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, | |
2119 | NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, | |
581a8b0f | 2120 | NL80211_MESH_SETUP_IE, |
15d5dda6 | 2121 | NL80211_MESH_SETUP_USERSPACE_AUTH, |
b130e5ce | 2122 | NL80211_MESH_SETUP_USERSPACE_AMPE, |
c80d545d JC |
2123 | |
2124 | /* keep last */ | |
2125 | __NL80211_MESH_SETUP_ATTR_AFTER_LAST, | |
2126 | NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 | |
2127 | }; | |
2128 | ||
31888487 JM |
2129 | /** |
2130 | * enum nl80211_txq_attr - TX queue parameter attributes | |
2131 | * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved | |
2132 | * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) | |
2133 | * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning | |
2134 | * disabled | |
2135 | * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form | |
2136 | * 2^n-1 in the range 1..32767] | |
2137 | * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form | |
2138 | * 2^n-1 in the range 1..32767] | |
2139 | * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] | |
2140 | * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal | |
2141 | * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number | |
2142 | */ | |
2143 | enum nl80211_txq_attr { | |
2144 | __NL80211_TXQ_ATTR_INVALID, | |
2145 | NL80211_TXQ_ATTR_QUEUE, | |
2146 | NL80211_TXQ_ATTR_TXOP, | |
2147 | NL80211_TXQ_ATTR_CWMIN, | |
2148 | NL80211_TXQ_ATTR_CWMAX, | |
2149 | NL80211_TXQ_ATTR_AIFS, | |
2150 | ||
2151 | /* keep last */ | |
2152 | __NL80211_TXQ_ATTR_AFTER_LAST, | |
2153 | NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 | |
2154 | }; | |
2155 | ||
2156 | enum nl80211_txq_q { | |
2157 | NL80211_TXQ_Q_VO, | |
2158 | NL80211_TXQ_Q_VI, | |
2159 | NL80211_TXQ_Q_BE, | |
2160 | NL80211_TXQ_Q_BK | |
2161 | }; | |
2162 | ||
094d05dc S |
2163 | enum nl80211_channel_type { |
2164 | NL80211_CHAN_NO_HT, | |
2165 | NL80211_CHAN_HT20, | |
2166 | NL80211_CHAN_HT40MINUS, | |
2167 | NL80211_CHAN_HT40PLUS | |
72bdcf34 | 2168 | }; |
2a519311 JB |
2169 | |
2170 | /** | |
2171 | * enum nl80211_bss - netlink attributes for a BSS | |
2172 | * | |
2173 | * @__NL80211_BSS_INVALID: invalid | |
2a5fb7b0 | 2174 | * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) |
2a519311 JB |
2175 | * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) |
2176 | * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) | |
2177 | * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) | |
2178 | * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) | |
2179 | * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the | |
34a6eddb JM |
2180 | * raw information elements from the probe response/beacon (bin); |
2181 | * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are | |
2182 | * from a Probe Response frame; otherwise they are from a Beacon frame. | |
2183 | * However, if the driver does not indicate the source of the IEs, these | |
2184 | * IEs may be from either frame subtype. | |
2a519311 JB |
2185 | * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon |
2186 | * in mBm (100 * dBm) (s32) | |
2187 | * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon | |
2188 | * in unspecified units, scaled to 0..100 (u8) | |
48ab905d | 2189 | * @NL80211_BSS_STATUS: status, if this BSS is "used" |
7c89606e | 2190 | * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms |
34a6eddb JM |
2191 | * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information |
2192 | * elements from a Beacon frame (bin); not present if no Beacon frame has | |
2193 | * yet been received | |
2a519311 JB |
2194 | * @__NL80211_BSS_AFTER_LAST: internal |
2195 | * @NL80211_BSS_MAX: highest BSS attribute | |
2196 | */ | |
2197 | enum nl80211_bss { | |
2198 | __NL80211_BSS_INVALID, | |
2199 | NL80211_BSS_BSSID, | |
2200 | NL80211_BSS_FREQUENCY, | |
2201 | NL80211_BSS_TSF, | |
2202 | NL80211_BSS_BEACON_INTERVAL, | |
2203 | NL80211_BSS_CAPABILITY, | |
2204 | NL80211_BSS_INFORMATION_ELEMENTS, | |
2205 | NL80211_BSS_SIGNAL_MBM, | |
2206 | NL80211_BSS_SIGNAL_UNSPEC, | |
48ab905d | 2207 | NL80211_BSS_STATUS, |
7c89606e | 2208 | NL80211_BSS_SEEN_MS_AGO, |
34a6eddb | 2209 | NL80211_BSS_BEACON_IES, |
2a519311 JB |
2210 | |
2211 | /* keep last */ | |
2212 | __NL80211_BSS_AFTER_LAST, | |
2213 | NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 | |
2214 | }; | |
2215 | ||
48ab905d JB |
2216 | /** |
2217 | * enum nl80211_bss_status - BSS "status" | |
2a5fb7b0 JB |
2218 | * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. |
2219 | * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. | |
2220 | * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. | |
2221 | * | |
2222 | * The BSS status is a BSS attribute in scan dumps, which | |
2223 | * indicates the status the interface has wrt. this BSS. | |
48ab905d JB |
2224 | */ |
2225 | enum nl80211_bss_status { | |
2226 | NL80211_BSS_STATUS_AUTHENTICATED, | |
2227 | NL80211_BSS_STATUS_ASSOCIATED, | |
2228 | NL80211_BSS_STATUS_IBSS_JOINED, | |
2229 | }; | |
2230 | ||
636a5d36 JM |
2231 | /** |
2232 | * enum nl80211_auth_type - AuthenticationType | |
2233 | * | |
2234 | * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication | |
2235 | * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) | |
2236 | * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) | |
2237 | * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) | |
b23aa676 SO |
2238 | * @__NL80211_AUTHTYPE_NUM: internal |
2239 | * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm | |
2240 | * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by | |
2241 | * trying multiple times); this is invalid in netlink -- leave out | |
2242 | * the attribute for this on CONNECT commands. | |
636a5d36 JM |
2243 | */ |
2244 | enum nl80211_auth_type { | |
2245 | NL80211_AUTHTYPE_OPEN_SYSTEM, | |
2246 | NL80211_AUTHTYPE_SHARED_KEY, | |
2247 | NL80211_AUTHTYPE_FT, | |
2248 | NL80211_AUTHTYPE_NETWORK_EAP, | |
b23aa676 SO |
2249 | |
2250 | /* keep last */ | |
2251 | __NL80211_AUTHTYPE_NUM, | |
2252 | NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, | |
2253 | NL80211_AUTHTYPE_AUTOMATIC | |
636a5d36 | 2254 | }; |
a3b8b056 JM |
2255 | |
2256 | /** | |
2257 | * enum nl80211_key_type - Key Type | |
2258 | * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key | |
2259 | * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key | |
2260 | * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) | |
e31b8213 | 2261 | * @NUM_NL80211_KEYTYPES: number of defined key types |
a3b8b056 JM |
2262 | */ |
2263 | enum nl80211_key_type { | |
2264 | NL80211_KEYTYPE_GROUP, | |
2265 | NL80211_KEYTYPE_PAIRWISE, | |
2266 | NL80211_KEYTYPE_PEERKEY, | |
e31b8213 JB |
2267 | |
2268 | NUM_NL80211_KEYTYPES | |
a3b8b056 JM |
2269 | }; |
2270 | ||
dc6382ce JM |
2271 | /** |
2272 | * enum nl80211_mfp - Management frame protection state | |
2273 | * @NL80211_MFP_NO: Management frame protection not used | |
2274 | * @NL80211_MFP_REQUIRED: Management frame protection required | |
2275 | */ | |
2276 | enum nl80211_mfp { | |
2277 | NL80211_MFP_NO, | |
2278 | NL80211_MFP_REQUIRED, | |
2279 | }; | |
2280 | ||
b23aa676 SO |
2281 | enum nl80211_wpa_versions { |
2282 | NL80211_WPA_VERSION_1 = 1 << 0, | |
2283 | NL80211_WPA_VERSION_2 = 1 << 1, | |
2284 | }; | |
2285 | ||
dbd2fd65 JB |
2286 | /** |
2287 | * enum nl80211_key_default_types - key default types | |
2288 | * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid | |
2289 | * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default | |
2290 | * unicast key | |
2291 | * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default | |
2292 | * multicast key | |
2293 | * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types | |
2294 | */ | |
2295 | enum nl80211_key_default_types { | |
2296 | __NL80211_KEY_DEFAULT_TYPE_INVALID, | |
2297 | NL80211_KEY_DEFAULT_TYPE_UNICAST, | |
2298 | NL80211_KEY_DEFAULT_TYPE_MULTICAST, | |
2299 | ||
2300 | NUM_NL80211_KEY_DEFAULT_TYPES | |
2301 | }; | |
2302 | ||
b9454e83 JB |
2303 | /** |
2304 | * enum nl80211_key_attributes - key attributes | |
2305 | * @__NL80211_KEY_INVALID: invalid | |
2306 | * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of | |
2307 | * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC | |
2308 | * keys | |
2309 | * @NL80211_KEY_IDX: key ID (u8, 0-3) | |
2310 | * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 | |
2311 | * section 7.3.2.25.1, e.g. 0x000FAC04) | |
2312 | * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and | |
2313 | * CCMP keys, each six bytes in little endian | |
2314 | * @NL80211_KEY_DEFAULT: flag indicating default key | |
2315 | * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key | |
e31b8213 JB |
2316 | * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not |
2317 | * specified the default depends on whether a MAC address was | |
2318 | * given with the command using the key or not (u32) | |
dbd2fd65 JB |
2319 | * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags |
2320 | * attributes, specifying what a key should be set as default as. | |
2321 | * See &enum nl80211_key_default_types. | |
b9454e83 JB |
2322 | * @__NL80211_KEY_AFTER_LAST: internal |
2323 | * @NL80211_KEY_MAX: highest key attribute | |
2324 | */ | |
2325 | enum nl80211_key_attributes { | |
2326 | __NL80211_KEY_INVALID, | |
2327 | NL80211_KEY_DATA, | |
2328 | NL80211_KEY_IDX, | |
2329 | NL80211_KEY_CIPHER, | |
2330 | NL80211_KEY_SEQ, | |
2331 | NL80211_KEY_DEFAULT, | |
2332 | NL80211_KEY_DEFAULT_MGMT, | |
e31b8213 | 2333 | NL80211_KEY_TYPE, |
dbd2fd65 | 2334 | NL80211_KEY_DEFAULT_TYPES, |
b9454e83 JB |
2335 | |
2336 | /* keep last */ | |
2337 | __NL80211_KEY_AFTER_LAST, | |
2338 | NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 | |
2339 | }; | |
2340 | ||
13ae75b1 JM |
2341 | /** |
2342 | * enum nl80211_tx_rate_attributes - TX rate set attributes | |
2343 | * @__NL80211_TXRATE_INVALID: invalid | |
2344 | * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection | |
2345 | * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with | |
2346 | * 1 = 500 kbps) but without the IE length restriction (at most | |
2347 | * %NL80211_MAX_SUPP_RATES in a single array). | |
2348 | * @__NL80211_TXRATE_AFTER_LAST: internal | |
2349 | * @NL80211_TXRATE_MAX: highest TX rate attribute | |
2350 | */ | |
2351 | enum nl80211_tx_rate_attributes { | |
2352 | __NL80211_TXRATE_INVALID, | |
2353 | NL80211_TXRATE_LEGACY, | |
2354 | ||
2355 | /* keep last */ | |
2356 | __NL80211_TXRATE_AFTER_LAST, | |
2357 | NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 | |
2358 | }; | |
2359 | ||
2360 | /** | |
2361 | * enum nl80211_band - Frequency band | |
2a5fb7b0 JB |
2362 | * @NL80211_BAND_2GHZ: 2.4 GHz ISM band |
2363 | * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) | |
13ae75b1 JM |
2364 | */ |
2365 | enum nl80211_band { | |
2366 | NL80211_BAND_2GHZ, | |
2367 | NL80211_BAND_5GHZ, | |
2368 | }; | |
2369 | ||
ffb9eb3d KV |
2370 | enum nl80211_ps_state { |
2371 | NL80211_PS_DISABLED, | |
2372 | NL80211_PS_ENABLED, | |
2373 | }; | |
2374 | ||
d6dc1a38 JO |
2375 | /** |
2376 | * enum nl80211_attr_cqm - connection quality monitor attributes | |
2377 | * @__NL80211_ATTR_CQM_INVALID: invalid | |
4ac5541b JO |
2378 | * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies |
2379 | * the threshold for the RSSI level at which an event will be sent. Zero | |
2380 | * to disable. | |
2381 | * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies | |
2382 | * the minimum amount the RSSI level must change after an event before a | |
2383 | * new event may be issued (to reduce effects of RSSI oscillation). | |
d6dc1a38 | 2384 | * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event |
c063dbf5 JB |
2385 | * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many |
2386 | * consecutive packets were not acknowledged by the peer | |
d6dc1a38 JO |
2387 | * @__NL80211_ATTR_CQM_AFTER_LAST: internal |
2388 | * @NL80211_ATTR_CQM_MAX: highest key attribute | |
2389 | */ | |
2390 | enum nl80211_attr_cqm { | |
2391 | __NL80211_ATTR_CQM_INVALID, | |
2392 | NL80211_ATTR_CQM_RSSI_THOLD, | |
2393 | NL80211_ATTR_CQM_RSSI_HYST, | |
2394 | NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, | |
c063dbf5 | 2395 | NL80211_ATTR_CQM_PKT_LOSS_EVENT, |
d6dc1a38 JO |
2396 | |
2397 | /* keep last */ | |
2398 | __NL80211_ATTR_CQM_AFTER_LAST, | |
2399 | NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 | |
2400 | }; | |
2401 | ||
2402 | /** | |
2403 | * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event | |
2a5fb7b0 | 2404 | * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the |
d6dc1a38 | 2405 | * configured threshold |
2a5fb7b0 | 2406 | * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the |
d6dc1a38 JO |
2407 | * configured threshold |
2408 | */ | |
2409 | enum nl80211_cqm_rssi_threshold_event { | |
2410 | NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, | |
2411 | NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, | |
2412 | }; | |
2413 | ||
fa61cf70 JO |
2414 | |
2415 | /** | |
2416 | * enum nl80211_tx_power_setting - TX power adjustment | |
2417 | * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power | |
2418 | * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter | |
2419 | * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter | |
2420 | */ | |
2421 | enum nl80211_tx_power_setting { | |
2422 | NL80211_TX_POWER_AUTOMATIC, | |
2423 | NL80211_TX_POWER_LIMITED, | |
2424 | NL80211_TX_POWER_FIXED, | |
2425 | }; | |
2426 | ||
ff1b6e69 JB |
2427 | /** |
2428 | * enum nl80211_wowlan_packet_pattern_attr - WoWLAN packet pattern attribute | |
2429 | * @__NL80211_WOWLAN_PKTPAT_INVALID: invalid number for nested attribute | |
2430 | * @NL80211_WOWLAN_PKTPAT_PATTERN: the pattern, values where the mask has | |
2431 | * a zero bit are ignored | |
2432 | * @NL80211_WOWLAN_PKTPAT_MASK: pattern mask, must be long enough to have | |
2433 | * a bit for each byte in the pattern. The lowest-order bit corresponds | |
2434 | * to the first byte of the pattern, but the bytes of the pattern are | |
2435 | * in a little-endian-like format, i.e. the 9th byte of the pattern | |
2436 | * corresponds to the lowest-order bit in the second byte of the mask. | |
2437 | * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where | |
2438 | * xx indicates "don't care") would be represented by a pattern of | |
2439 | * twelve zero bytes, and a mask of "0xed,0x07". | |
2440 | * Note that the pattern matching is done as though frames were not | |
2441 | * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked | |
2442 | * first (including SNAP header unpacking) and then matched. | |
2443 | * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes | |
2444 | * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number | |
2445 | */ | |
2446 | enum nl80211_wowlan_packet_pattern_attr { | |
2447 | __NL80211_WOWLAN_PKTPAT_INVALID, | |
2448 | NL80211_WOWLAN_PKTPAT_MASK, | |
2449 | NL80211_WOWLAN_PKTPAT_PATTERN, | |
2450 | ||
2451 | NUM_NL80211_WOWLAN_PKTPAT, | |
2452 | MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, | |
2453 | }; | |
2454 | ||
2455 | /** | |
2456 | * struct nl80211_wowlan_pattern_support - pattern support information | |
2457 | * @max_patterns: maximum number of patterns supported | |
2458 | * @min_pattern_len: minimum length of each pattern | |
2459 | * @max_pattern_len: maximum length of each pattern | |
2460 | * | |
2461 | * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when | |
2462 | * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the | |
2463 | * capability information given by the kernel to userspace. | |
2464 | */ | |
2465 | struct nl80211_wowlan_pattern_support { | |
2466 | __u32 max_patterns; | |
2467 | __u32 min_pattern_len; | |
2468 | __u32 max_pattern_len; | |
2469 | } __attribute__((packed)); | |
2470 | ||
2471 | /** | |
2472 | * enum nl80211_wowlan_triggers - WoWLAN trigger definitions | |
2473 | * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes | |
2474 | * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put | |
2475 | * the chip into a special state -- works best with chips that have | |
2476 | * support for low-power operation already (flag) | |
2477 | * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect | |
2478 | * is detected is implementation-specific (flag) | |
2479 | * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed | |
2480 | * by 16 repetitions of MAC addr, anywhere in payload) (flag) | |
2481 | * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns | |
2482 | * which are passed in an array of nested attributes, each nested attribute | |
2483 | * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. | |
2484 | * Each pattern defines a wakeup packet. The matching is done on the MSDU, | |
2485 | * i.e. as though the packet was an 802.3 packet, so the pattern matching | |
2486 | * is done after the packet is converted to the MSDU. | |
2487 | * | |
2488 | * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute | |
2489 | * carrying a &struct nl80211_wowlan_pattern_support. | |
77dbbb13 JB |
2490 | * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be |
2491 | * used when setting, used only to indicate that GTK rekeying is supported | |
2492 | * by the device (flag) | |
2493 | * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if | |
2494 | * done by the device) (flag) | |
2495 | * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request | |
2496 | * packet (flag) | |
2497 | * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) | |
2498 | * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released | |
2499 | * (on devices that have rfkill in the device) (flag) | |
ff1b6e69 JB |
2500 | * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers |
2501 | * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number | |
2502 | */ | |
2503 | enum nl80211_wowlan_triggers { | |
2504 | __NL80211_WOWLAN_TRIG_INVALID, | |
2505 | NL80211_WOWLAN_TRIG_ANY, | |
2506 | NL80211_WOWLAN_TRIG_DISCONNECT, | |
2507 | NL80211_WOWLAN_TRIG_MAGIC_PKT, | |
2508 | NL80211_WOWLAN_TRIG_PKT_PATTERN, | |
77dbbb13 JB |
2509 | NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, |
2510 | NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, | |
2511 | NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, | |
2512 | NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, | |
2513 | NL80211_WOWLAN_TRIG_RFKILL_RELEASE, | |
ff1b6e69 JB |
2514 | |
2515 | /* keep last */ | |
2516 | NUM_NL80211_WOWLAN_TRIG, | |
2517 | MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 | |
2518 | }; | |
2519 | ||
7527a782 JB |
2520 | /** |
2521 | * enum nl80211_iface_limit_attrs - limit attributes | |
2522 | * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) | |
2523 | * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that | |
2524 | * can be chosen from this set of interface types (u32) | |
2525 | * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a | |
2526 | * flag attribute for each interface type in this set | |
2527 | * @NUM_NL80211_IFACE_LIMIT: number of attributes | |
2528 | * @MAX_NL80211_IFACE_LIMIT: highest attribute number | |
2529 | */ | |
2530 | enum nl80211_iface_limit_attrs { | |
2531 | NL80211_IFACE_LIMIT_UNSPEC, | |
2532 | NL80211_IFACE_LIMIT_MAX, | |
2533 | NL80211_IFACE_LIMIT_TYPES, | |
2534 | ||
2535 | /* keep last */ | |
2536 | NUM_NL80211_IFACE_LIMIT, | |
2537 | MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 | |
2538 | }; | |
2539 | ||
2540 | /** | |
2541 | * enum nl80211_if_combination_attrs -- interface combination attributes | |
2542 | * | |
2543 | * @NL80211_IFACE_COMB_UNSPEC: (reserved) | |
2544 | * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits | |
2545 | * for given interface types, see &enum nl80211_iface_limit_attrs. | |
2546 | * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of | |
2547 | * interfaces that can be created in this group. This number doesn't | |
2548 | * apply to interfaces purely managed in software, which are listed | |
2549 | * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. | |
2550 | * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that | |
2551 | * beacon intervals within this group must be all the same even for | |
2552 | * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt | |
2553 | * the infrastructure network's beacon interval. | |
2554 | * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many | |
2555 | * different channels may be used within this group. | |
2556 | * @NUM_NL80211_IFACE_COMB: number of attributes | |
2557 | * @MAX_NL80211_IFACE_COMB: highest attribute number | |
2558 | * | |
2559 | * Examples: | |
2560 | * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 | |
2561 | * => allows an AP and a STA that must match BIs | |
2562 | * | |
2563 | * numbers = [ #{AP, P2P-GO} <= 8 ], channels = 1, max = 8 | |
2564 | * => allows 8 of AP/GO | |
2565 | * | |
2566 | * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 | |
2567 | * => allows two STAs on different channels | |
2568 | * | |
2569 | * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 | |
2570 | * => allows a STA plus three P2P interfaces | |
2571 | * | |
2572 | * The list of these four possiblities could completely be contained | |
2573 | * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate | |
2574 | * that any of these groups must match. | |
2575 | * | |
2576 | * "Combinations" of just a single interface will not be listed here, | |
2577 | * a single interface of any valid interface type is assumed to always | |
2578 | * be possible by itself. This means that implicitly, for each valid | |
2579 | * interface type, the following group always exists: | |
2580 | * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 | |
2581 | */ | |
2582 | enum nl80211_if_combination_attrs { | |
2583 | NL80211_IFACE_COMB_UNSPEC, | |
2584 | NL80211_IFACE_COMB_LIMITS, | |
2585 | NL80211_IFACE_COMB_MAXNUM, | |
2586 | NL80211_IFACE_COMB_STA_AP_BI_MATCH, | |
2587 | NL80211_IFACE_COMB_NUM_CHANNELS, | |
2588 | ||
2589 | /* keep last */ | |
2590 | NUM_NL80211_IFACE_COMB, | |
2591 | MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 | |
2592 | }; | |
2593 | ||
57cf8043 JC |
2594 | |
2595 | /** | |
2596 | * enum nl80211_plink_state - state of a mesh peer link finite state machine | |
2597 | * | |
2598 | * @NL80211_PLINK_LISTEN: initial state, considered the implicit | |
2599 | * state of non existant mesh peer links | |
2600 | * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to | |
2601 | * this mesh peer | |
2602 | * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received | |
2603 | * from this mesh peer | |
2604 | * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been | |
2605 | * received from this mesh peer | |
2606 | * @NL80211_PLINK_ESTAB: mesh peer link is established | |
2607 | * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled | |
2608 | * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh | |
2609 | * plink are discarded | |
2610 | * @NUM_NL80211_PLINK_STATES: number of peer link states | |
2611 | * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states | |
2612 | */ | |
2613 | enum nl80211_plink_state { | |
2614 | NL80211_PLINK_LISTEN, | |
2615 | NL80211_PLINK_OPN_SNT, | |
2616 | NL80211_PLINK_OPN_RCVD, | |
2617 | NL80211_PLINK_CNF_RCVD, | |
2618 | NL80211_PLINK_ESTAB, | |
2619 | NL80211_PLINK_HOLDING, | |
2620 | NL80211_PLINK_BLOCKED, | |
2621 | ||
2622 | /* keep last */ | |
2623 | NUM_NL80211_PLINK_STATES, | |
2624 | MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 | |
2625 | }; | |
2626 | ||
e5497d76 JB |
2627 | #define NL80211_KCK_LEN 16 |
2628 | #define NL80211_KEK_LEN 16 | |
2629 | #define NL80211_REPLAY_CTR_LEN 8 | |
2630 | ||
2631 | /** | |
2632 | * enum nl80211_rekey_data - attributes for GTK rekey offload | |
2633 | * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes | |
2634 | * @NL80211_REKEY_DATA_KEK: key encryption key (binary) | |
2635 | * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) | |
2636 | * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) | |
2637 | * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) | |
2638 | * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) | |
2639 | */ | |
2640 | enum nl80211_rekey_data { | |
2641 | __NL80211_REKEY_DATA_INVALID, | |
2642 | NL80211_REKEY_DATA_KEK, | |
2643 | NL80211_REKEY_DATA_KCK, | |
2644 | NL80211_REKEY_DATA_REPLAY_CTR, | |
2645 | ||
2646 | /* keep last */ | |
2647 | NUM_NL80211_REKEY_DATA, | |
2648 | MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 | |
2649 | }; | |
2650 | ||
32e9de84 JM |
2651 | /** |
2652 | * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID | |
2653 | * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in | |
2654 | * Beacon frames) | |
2655 | * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element | |
2656 | * in Beacon frames | |
2657 | * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID | |
2658 | * element in Beacon frames but zero out each byte in the SSID | |
2659 | */ | |
2660 | enum nl80211_hidden_ssid { | |
2661 | NL80211_HIDDEN_SSID_NOT_IN_USE, | |
2662 | NL80211_HIDDEN_SSID_ZERO_LEN, | |
2663 | NL80211_HIDDEN_SSID_ZERO_CONTENTS | |
2664 | }; | |
2665 | ||
c75786c9 EP |
2666 | /** |
2667 | * enum nl80211_sta_wme_attr - station WME attributes | |
2668 | * @__NL80211_STA_WME_INVALID: invalid number for nested attribute | |
910868db EP |
2669 | * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format |
2670 | * is the same as the AC bitmap in the QoS info field. | |
2671 | * @NL80211_STA_WME_MAX_SP: max service period. the format is the same | |
2672 | * as the MAX_SP field in the QoS info field (but already shifted down). | |
c75786c9 EP |
2673 | * @__NL80211_STA_WME_AFTER_LAST: internal |
2674 | * @NL80211_STA_WME_MAX: highest station WME attribute | |
2675 | */ | |
2676 | enum nl80211_sta_wme_attr { | |
2677 | __NL80211_STA_WME_INVALID, | |
2678 | NL80211_STA_WME_UAPSD_QUEUES, | |
2679 | NL80211_STA_WME_MAX_SP, | |
2680 | ||
2681 | /* keep last */ | |
2682 | __NL80211_STA_WME_AFTER_LAST, | |
2683 | NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 | |
2684 | }; | |
2685 | ||
c9df56b4 JM |
2686 | /** |
2687 | * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates | |
2688 | * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes | |
2689 | * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher | |
2690 | * priority) | |
2691 | * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) | |
2692 | * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) | |
2693 | * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes | |
2694 | * (internal) | |
2695 | * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute | |
2696 | * (internal) | |
2697 | */ | |
2698 | enum nl80211_pmksa_candidate_attr { | |
2699 | __NL80211_PMKSA_CANDIDATE_INVALID, | |
2700 | NL80211_PMKSA_CANDIDATE_INDEX, | |
2701 | NL80211_PMKSA_CANDIDATE_BSSID, | |
2702 | NL80211_PMKSA_CANDIDATE_PREAUTH, | |
2703 | ||
2704 | /* keep last */ | |
2705 | NUM_NL80211_PMKSA_CANDIDATE, | |
2706 | MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 | |
2707 | }; | |
2708 | ||
109086ce AN |
2709 | /** |
2710 | * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION | |
2711 | * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request | |
2712 | * @NL80211_TDLS_SETUP: Setup TDLS link | |
2713 | * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established | |
2714 | * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link | |
2715 | * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link | |
2716 | */ | |
2717 | enum nl80211_tdls_operation { | |
2718 | NL80211_TDLS_DISCOVERY_REQ, | |
2719 | NL80211_TDLS_SETUP, | |
2720 | NL80211_TDLS_TEARDOWN, | |
2721 | NL80211_TDLS_ENABLE_LINK, | |
2722 | NL80211_TDLS_DISABLE_LINK, | |
2723 | }; | |
2724 | ||
562a7480 JB |
2725 | /* |
2726 | * enum nl80211_ap_sme_features - device-integrated AP features | |
2727 | * Reserved for future use, no bits are defined in | |
2728 | * NL80211_ATTR_DEVICE_AP_SME yet. | |
2729 | enum nl80211_ap_sme_features { | |
2730 | }; | |
2731 | */ | |
2732 | ||
1f074bd8 JB |
2733 | /** |
2734 | * enum nl80211_feature_flags - device/driver features | |
2735 | * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back | |
2736 | * TX status to the socket error queue when requested with the | |
2737 | * socket option. | |
2738 | */ | |
2739 | enum nl80211_feature_flags { | |
2740 | NL80211_FEATURE_SK_TX_STATUS = 1 << 0, | |
2741 | }; | |
2742 | ||
87bbbe22 AN |
2743 | /** |
2744 | * enum nl80211_probe_resp_offload_support_attr - optional supported | |
2745 | * protocols for probe-response offloading by the driver/FW. | |
2746 | * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. | |
2747 | * Each enum value represents a bit in the bitmap of supported | |
2748 | * protocols. Typically a subset of probe-requests belonging to a | |
2749 | * supported protocol will be excluded from offload and uploaded | |
2750 | * to the host. | |
2751 | * | |
2752 | * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 | |
2753 | * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 | |
2754 | * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P | |
2755 | * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u | |
2756 | */ | |
2757 | enum nl80211_probe_resp_offload_support_attr { | |
2758 | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, | |
2759 | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, | |
2760 | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, | |
2761 | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, | |
2762 | }; | |
2763 | ||
704232c2 | 2764 | #endif /* __LINUX_NL80211_H */ |