Commit | Line | Data |
---|---|---|
00db8189 AF |
1 | /* |
2 | * include/linux/phy.h | |
3 | * | |
4 | * Framework and drivers for configuring and reading different PHYs | |
5 | * Based on code in sungem_phy.c and gianfar_phy.c | |
6 | * | |
7 | * Author: Andy Fleming | |
8 | * | |
9 | * Copyright (c) 2004 Freescale Semiconductor, Inc. | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify it | |
12 | * under the terms of the GNU General Public License as published by the | |
13 | * Free Software Foundation; either version 2 of the License, or (at your | |
14 | * option) any later version. | |
15 | * | |
16 | */ | |
17 | ||
18 | #ifndef __PHY_H | |
19 | #define __PHY_H | |
20 | ||
21 | #include <linux/spinlock.h> | |
22 | #include <linux/device.h> | |
13df29f6 MR |
23 | #include <linux/ethtool.h> |
24 | #include <linux/mii.h> | |
25 | #include <linux/timer.h> | |
26 | #include <linux/workqueue.h> | |
00db8189 | 27 | |
0ac49527 MR |
28 | #include <asm/atomic.h> |
29 | ||
00db8189 AF |
30 | #define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \ |
31 | SUPPORTED_10baseT_Full | \ | |
32 | SUPPORTED_100baseT_Half | \ | |
33 | SUPPORTED_100baseT_Full | \ | |
34 | SUPPORTED_Autoneg | \ | |
35 | SUPPORTED_TP | \ | |
36 | SUPPORTED_MII) | |
37 | ||
38 | #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \ | |
39 | SUPPORTED_1000baseT_Half | \ | |
40 | SUPPORTED_1000baseT_Full) | |
41 | ||
c5e38a94 AF |
42 | /* |
43 | * Set phydev->irq to PHY_POLL if interrupts are not supported, | |
00db8189 AF |
44 | * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if |
45 | * the attached driver handles the interrupt | |
46 | */ | |
47 | #define PHY_POLL -1 | |
48 | #define PHY_IGNORE_INTERRUPT -2 | |
49 | ||
50 | #define PHY_HAS_INTERRUPT 0x00000001 | |
51 | #define PHY_HAS_MAGICANEG 0x00000002 | |
52 | ||
e8a2b6a4 AF |
53 | /* Interface Mode definitions */ |
54 | typedef enum { | |
55 | PHY_INTERFACE_MODE_MII, | |
56 | PHY_INTERFACE_MODE_GMII, | |
57 | PHY_INTERFACE_MODE_SGMII, | |
58 | PHY_INTERFACE_MODE_TBI, | |
59 | PHY_INTERFACE_MODE_RMII, | |
60 | PHY_INTERFACE_MODE_RGMII, | |
a999589c | 61 | PHY_INTERFACE_MODE_RGMII_ID, |
7d400a4c KP |
62 | PHY_INTERFACE_MODE_RGMII_RXID, |
63 | PHY_INTERFACE_MODE_RGMII_TXID, | |
e8a2b6a4 AF |
64 | PHY_INTERFACE_MODE_RTBI |
65 | } phy_interface_t; | |
66 | ||
00db8189 | 67 | |
e8a2b6a4 | 68 | #define PHY_INIT_TIMEOUT 100000 |
00db8189 AF |
69 | #define PHY_STATE_TIME 1 |
70 | #define PHY_FORCE_TIMEOUT 10 | |
71 | #define PHY_AN_TIMEOUT 10 | |
72 | ||
e8a2b6a4 | 73 | #define PHY_MAX_ADDR 32 |
00db8189 | 74 | |
a4d00f17 | 75 | /* Used when trying to connect to a specific phy (mii bus id:phy device id) */ |
9d9326d3 AF |
76 | #define PHY_ID_FMT "%s:%02x" |
77 | ||
78 | /* | |
79 | * Need to be a little smaller than phydev->dev.bus_id to leave room | |
80 | * for the ":%02x" | |
81 | */ | |
8e401ecc | 82 | #define MII_BUS_ID_SIZE (20 - 3) |
a4d00f17 | 83 | |
c5e38a94 AF |
84 | /* |
85 | * The Bus class for PHYs. Devices which provide access to | |
86 | * PHYs should register using this structure | |
87 | */ | |
00db8189 AF |
88 | struct mii_bus { |
89 | const char *name; | |
9d9326d3 | 90 | char id[MII_BUS_ID_SIZE]; |
00db8189 AF |
91 | void *priv; |
92 | int (*read)(struct mii_bus *bus, int phy_id, int regnum); | |
93 | int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val); | |
94 | int (*reset)(struct mii_bus *bus); | |
95 | ||
c5e38a94 AF |
96 | /* |
97 | * A lock to ensure that only one thing can read/write | |
98 | * the MDIO bus at a time | |
99 | */ | |
35b5f6b1 | 100 | struct mutex mdio_lock; |
00db8189 | 101 | |
18ee49dd | 102 | struct device *parent; |
46abc021 LB |
103 | enum { |
104 | MDIOBUS_ALLOCATED = 1, | |
105 | MDIOBUS_REGISTERED, | |
106 | MDIOBUS_UNREGISTERED, | |
107 | MDIOBUS_RELEASED, | |
108 | } state; | |
109 | struct device dev; | |
00db8189 AF |
110 | |
111 | /* list of all PHYs on bus */ | |
112 | struct phy_device *phy_map[PHY_MAX_ADDR]; | |
113 | ||
f896424c MP |
114 | /* Phy addresses to be ignored when probing */ |
115 | u32 phy_mask; | |
116 | ||
c5e38a94 AF |
117 | /* |
118 | * Pointer to an array of interrupts, each PHY's | |
119 | * interrupt at the index matching its address | |
120 | */ | |
00db8189 AF |
121 | int *irq; |
122 | }; | |
46abc021 | 123 | #define to_mii_bus(d) container_of(d, struct mii_bus, dev) |
00db8189 | 124 | |
2e888103 LB |
125 | struct mii_bus *mdiobus_alloc(void); |
126 | int mdiobus_register(struct mii_bus *bus); | |
127 | void mdiobus_unregister(struct mii_bus *bus); | |
128 | void mdiobus_free(struct mii_bus *bus); | |
129 | struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); | |
130 | int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum); | |
131 | int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val); | |
132 | ||
133 | ||
e8a2b6a4 AF |
134 | #define PHY_INTERRUPT_DISABLED 0x0 |
135 | #define PHY_INTERRUPT_ENABLED 0x80000000 | |
00db8189 AF |
136 | |
137 | /* PHY state machine states: | |
138 | * | |
139 | * DOWN: PHY device and driver are not ready for anything. probe | |
140 | * should be called if and only if the PHY is in this state, | |
141 | * given that the PHY device exists. | |
142 | * - PHY driver probe function will, depending on the PHY, set | |
143 | * the state to STARTING or READY | |
144 | * | |
145 | * STARTING: PHY device is coming up, and the ethernet driver is | |
146 | * not ready. PHY drivers may set this in the probe function. | |
147 | * If they do, they are responsible for making sure the state is | |
148 | * eventually set to indicate whether the PHY is UP or READY, | |
149 | * depending on the state when the PHY is done starting up. | |
150 | * - PHY driver will set the state to READY | |
151 | * - start will set the state to PENDING | |
152 | * | |
153 | * READY: PHY is ready to send and receive packets, but the | |
154 | * controller is not. By default, PHYs which do not implement | |
155 | * probe will be set to this state by phy_probe(). If the PHY | |
156 | * driver knows the PHY is ready, and the PHY state is STARTING, | |
157 | * then it sets this STATE. | |
158 | * - start will set the state to UP | |
159 | * | |
160 | * PENDING: PHY device is coming up, but the ethernet driver is | |
161 | * ready. phy_start will set this state if the PHY state is | |
162 | * STARTING. | |
163 | * - PHY driver will set the state to UP when the PHY is ready | |
164 | * | |
165 | * UP: The PHY and attached device are ready to do work. | |
166 | * Interrupts should be started here. | |
167 | * - timer moves to AN | |
168 | * | |
169 | * AN: The PHY is currently negotiating the link state. Link is | |
170 | * therefore down for now. phy_timer will set this state when it | |
171 | * detects the state is UP. config_aneg will set this state | |
172 | * whenever called with phydev->autoneg set to AUTONEG_ENABLE. | |
173 | * - If autonegotiation finishes, but there's no link, it sets | |
174 | * the state to NOLINK. | |
175 | * - If aneg finishes with link, it sets the state to RUNNING, | |
176 | * and calls adjust_link | |
177 | * - If autonegotiation did not finish after an arbitrary amount | |
178 | * of time, autonegotiation should be tried again if the PHY | |
179 | * supports "magic" autonegotiation (back to AN) | |
180 | * - If it didn't finish, and no magic_aneg, move to FORCING. | |
181 | * | |
182 | * NOLINK: PHY is up, but not currently plugged in. | |
183 | * - If the timer notes that the link comes back, we move to RUNNING | |
184 | * - config_aneg moves to AN | |
185 | * - phy_stop moves to HALTED | |
186 | * | |
187 | * FORCING: PHY is being configured with forced settings | |
188 | * - if link is up, move to RUNNING | |
189 | * - If link is down, we drop to the next highest setting, and | |
190 | * retry (FORCING) after a timeout | |
191 | * - phy_stop moves to HALTED | |
192 | * | |
193 | * RUNNING: PHY is currently up, running, and possibly sending | |
194 | * and/or receiving packets | |
195 | * - timer will set CHANGELINK if we're polling (this ensures the | |
196 | * link state is polled every other cycle of this state machine, | |
197 | * which makes it every other second) | |
198 | * - irq will set CHANGELINK | |
199 | * - config_aneg will set AN | |
200 | * - phy_stop moves to HALTED | |
201 | * | |
202 | * CHANGELINK: PHY experienced a change in link state | |
203 | * - timer moves to RUNNING if link | |
204 | * - timer moves to NOLINK if the link is down | |
205 | * - phy_stop moves to HALTED | |
206 | * | |
207 | * HALTED: PHY is up, but no polling or interrupts are done. Or | |
208 | * PHY is in an error state. | |
209 | * | |
210 | * - phy_start moves to RESUMING | |
211 | * | |
212 | * RESUMING: PHY was halted, but now wants to run again. | |
213 | * - If we are forcing, or aneg is done, timer moves to RUNNING | |
214 | * - If aneg is not done, timer moves to AN | |
215 | * - phy_stop moves to HALTED | |
216 | */ | |
217 | enum phy_state { | |
218 | PHY_DOWN=0, | |
219 | PHY_STARTING, | |
220 | PHY_READY, | |
221 | PHY_PENDING, | |
222 | PHY_UP, | |
223 | PHY_AN, | |
224 | PHY_RUNNING, | |
225 | PHY_NOLINK, | |
226 | PHY_FORCING, | |
227 | PHY_CHANGELINK, | |
228 | PHY_HALTED, | |
229 | PHY_RESUMING | |
230 | }; | |
231 | ||
232 | /* phy_device: An instance of a PHY | |
233 | * | |
234 | * drv: Pointer to the driver for this PHY instance | |
235 | * bus: Pointer to the bus this PHY is on | |
236 | * dev: driver model device structure for this PHY | |
237 | * phy_id: UID for this device found during discovery | |
238 | * state: state of the PHY for management purposes | |
239 | * dev_flags: Device-specific flags used by the PHY driver. | |
240 | * addr: Bus address of PHY | |
241 | * link_timeout: The number of timer firings to wait before the | |
242 | * giving up on the current attempt at acquiring a link | |
243 | * irq: IRQ number of the PHY's interrupt (-1 if none) | |
244 | * phy_timer: The timer for handling the state machine | |
245 | * phy_queue: A work_queue for the interrupt | |
246 | * attached_dev: The attached enet driver's device instance ptr | |
247 | * adjust_link: Callback for the enet controller to respond to | |
248 | * changes in the link state. | |
249 | * adjust_state: Callback for the enet driver to respond to | |
250 | * changes in the state machine. | |
251 | * | |
252 | * speed, duplex, pause, supported, advertising, and | |
253 | * autoneg are used like in mii_if_info | |
254 | * | |
255 | * interrupts currently only supports enabled or disabled, | |
256 | * but could be changed in the future to support enabling | |
257 | * and disabling specific interrupts | |
258 | * | |
259 | * Contains some infrastructure for polling and interrupt | |
260 | * handling, as well as handling shifts in PHY hardware state | |
261 | */ | |
262 | struct phy_device { | |
263 | /* Information about the PHY type */ | |
264 | /* And management functions */ | |
265 | struct phy_driver *drv; | |
266 | ||
267 | struct mii_bus *bus; | |
268 | ||
269 | struct device dev; | |
270 | ||
271 | u32 phy_id; | |
272 | ||
273 | enum phy_state state; | |
274 | ||
275 | u32 dev_flags; | |
276 | ||
e8a2b6a4 AF |
277 | phy_interface_t interface; |
278 | ||
00db8189 AF |
279 | /* Bus address of the PHY (0-32) */ |
280 | int addr; | |
281 | ||
c5e38a94 AF |
282 | /* |
283 | * forced speed & duplex (no autoneg) | |
00db8189 AF |
284 | * partner speed & duplex & pause (autoneg) |
285 | */ | |
286 | int speed; | |
287 | int duplex; | |
288 | int pause; | |
289 | int asym_pause; | |
290 | ||
291 | /* The most recently read link state */ | |
292 | int link; | |
293 | ||
294 | /* Enabled Interrupts */ | |
295 | u32 interrupts; | |
296 | ||
297 | /* Union of PHY and Attached devices' supported modes */ | |
298 | /* See mii.h for more info */ | |
299 | u32 supported; | |
300 | u32 advertising; | |
301 | ||
302 | int autoneg; | |
303 | ||
304 | int link_timeout; | |
305 | ||
c5e38a94 AF |
306 | /* |
307 | * Interrupt number for this PHY | |
308 | * -1 means no interrupt | |
309 | */ | |
00db8189 AF |
310 | int irq; |
311 | ||
312 | /* private data pointer */ | |
313 | /* For use by PHYs to maintain extra state */ | |
314 | void *priv; | |
315 | ||
316 | /* Interrupt and Polling infrastructure */ | |
317 | struct work_struct phy_queue; | |
a390d1f3 | 318 | struct delayed_work state_queue; |
0ac49527 | 319 | atomic_t irq_disable; |
00db8189 | 320 | |
35b5f6b1 | 321 | struct mutex lock; |
00db8189 AF |
322 | |
323 | struct net_device *attached_dev; | |
324 | ||
325 | void (*adjust_link)(struct net_device *dev); | |
326 | ||
327 | void (*adjust_state)(struct net_device *dev); | |
328 | }; | |
329 | #define to_phy_device(d) container_of(d, struct phy_device, dev) | |
330 | ||
331 | /* struct phy_driver: Driver structure for a particular PHY type | |
332 | * | |
333 | * phy_id: The result of reading the UID registers of this PHY | |
334 | * type, and ANDing them with the phy_id_mask. This driver | |
335 | * only works for PHYs with IDs which match this field | |
336 | * name: The friendly name of this PHY type | |
337 | * phy_id_mask: Defines the important bits of the phy_id | |
338 | * features: A list of features (speed, duplex, etc) supported | |
339 | * by this PHY | |
340 | * flags: A bitfield defining certain other features this PHY | |
341 | * supports (like interrupts) | |
342 | * | |
343 | * The drivers must implement config_aneg and read_status. All | |
344 | * other functions are optional. Note that none of these | |
345 | * functions should be called from interrupt time. The goal is | |
346 | * for the bus read/write functions to be able to block when the | |
347 | * bus transaction is happening, and be freed up by an interrupt | |
348 | * (The MPC85xx has this ability, though it is not currently | |
349 | * supported in the driver). | |
350 | */ | |
351 | struct phy_driver { | |
352 | u32 phy_id; | |
353 | char *name; | |
354 | unsigned int phy_id_mask; | |
355 | u32 features; | |
356 | u32 flags; | |
357 | ||
c5e38a94 AF |
358 | /* |
359 | * Called to initialize the PHY, | |
360 | * including after a reset | |
361 | */ | |
00db8189 AF |
362 | int (*config_init)(struct phy_device *phydev); |
363 | ||
c5e38a94 AF |
364 | /* |
365 | * Called during discovery. Used to set | |
366 | * up device-specific structures, if any | |
367 | */ | |
00db8189 AF |
368 | int (*probe)(struct phy_device *phydev); |
369 | ||
370 | /* PHY Power Management */ | |
371 | int (*suspend)(struct phy_device *phydev); | |
372 | int (*resume)(struct phy_device *phydev); | |
373 | ||
c5e38a94 AF |
374 | /* |
375 | * Configures the advertisement and resets | |
00db8189 AF |
376 | * autonegotiation if phydev->autoneg is on, |
377 | * forces the speed to the current settings in phydev | |
c5e38a94 AF |
378 | * if phydev->autoneg is off |
379 | */ | |
00db8189 AF |
380 | int (*config_aneg)(struct phy_device *phydev); |
381 | ||
382 | /* Determines the negotiated speed and duplex */ | |
383 | int (*read_status)(struct phy_device *phydev); | |
384 | ||
385 | /* Clears any pending interrupts */ | |
386 | int (*ack_interrupt)(struct phy_device *phydev); | |
387 | ||
388 | /* Enables or disables interrupts */ | |
389 | int (*config_intr)(struct phy_device *phydev); | |
390 | ||
a8729eb3 AG |
391 | /* |
392 | * Checks if the PHY generated an interrupt. | |
393 | * For multi-PHY devices with shared PHY interrupt pin | |
394 | */ | |
395 | int (*did_interrupt)(struct phy_device *phydev); | |
396 | ||
00db8189 AF |
397 | /* Clears up any memory if needed */ |
398 | void (*remove)(struct phy_device *phydev); | |
399 | ||
400 | struct device_driver driver; | |
401 | }; | |
402 | #define to_phy_driver(d) container_of(d, struct phy_driver, driver) | |
403 | ||
f62220d3 AF |
404 | #define PHY_ANY_ID "MATCH ANY PHY" |
405 | #define PHY_ANY_UID 0xffffffff | |
406 | ||
407 | /* A Structure for boards to register fixups with the PHY Lib */ | |
408 | struct phy_fixup { | |
409 | struct list_head list; | |
8e401ecc | 410 | char bus_id[20]; |
f62220d3 AF |
411 | u32 phy_uid; |
412 | u32 phy_uid_mask; | |
413 | int (*run)(struct phy_device *phydev); | |
414 | }; | |
415 | ||
2e888103 LB |
416 | /** |
417 | * phy_read - Convenience function for reading a given PHY register | |
418 | * @phydev: the phy_device struct | |
419 | * @regnum: register number to read | |
420 | * | |
421 | * NOTE: MUST NOT be called from interrupt context, | |
422 | * because the bus read/write functions may wait for an interrupt | |
423 | * to conclude the operation. | |
424 | */ | |
425 | static inline int phy_read(struct phy_device *phydev, u16 regnum) | |
426 | { | |
427 | return mdiobus_read(phydev->bus, phydev->addr, regnum); | |
428 | } | |
429 | ||
430 | /** | |
431 | * phy_write - Convenience function for writing a given PHY register | |
432 | * @phydev: the phy_device struct | |
433 | * @regnum: register number to write | |
434 | * @val: value to write to @regnum | |
435 | * | |
436 | * NOTE: MUST NOT be called from interrupt context, | |
437 | * because the bus read/write functions may wait for an interrupt | |
438 | * to conclude the operation. | |
439 | */ | |
440 | static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val) | |
441 | { | |
442 | return mdiobus_write(phydev->bus, phydev->addr, regnum, val); | |
443 | } | |
444 | ||
cac1f3c8 | 445 | int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); |
00db8189 | 446 | struct phy_device* get_phy_device(struct mii_bus *bus, int addr); |
4dea547f | 447 | int phy_device_register(struct phy_device *phy); |
00db8189 AF |
448 | int phy_clear_interrupt(struct phy_device *phydev); |
449 | int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); | |
fa94f6d9 GL |
450 | int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, |
451 | u32 flags, phy_interface_t interface); | |
e1393456 | 452 | struct phy_device * phy_attach(struct net_device *dev, |
f62220d3 | 453 | const char *bus_id, u32 flags, phy_interface_t interface); |
fa94f6d9 GL |
454 | int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, |
455 | void (*handler)(struct net_device *), u32 flags, | |
456 | phy_interface_t interface); | |
f62220d3 | 457 | struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, |
e8a2b6a4 AF |
458 | void (*handler)(struct net_device *), u32 flags, |
459 | phy_interface_t interface); | |
e1393456 AF |
460 | void phy_disconnect(struct phy_device *phydev); |
461 | void phy_detach(struct phy_device *phydev); | |
462 | void phy_start(struct phy_device *phydev); | |
463 | void phy_stop(struct phy_device *phydev); | |
464 | int phy_start_aneg(struct phy_device *phydev); | |
465 | ||
e1393456 AF |
466 | void phy_sanitize_settings(struct phy_device *phydev); |
467 | int phy_stop_interrupts(struct phy_device *phydev); | |
9b9a8bfc AF |
468 | int phy_enable_interrupts(struct phy_device *phydev); |
469 | int phy_disable_interrupts(struct phy_device *phydev); | |
00db8189 AF |
470 | |
471 | static inline int phy_read_status(struct phy_device *phydev) { | |
472 | return phydev->drv->read_status(phydev); | |
473 | } | |
474 | ||
e1393456 | 475 | int genphy_config_advert(struct phy_device *phydev); |
00db8189 AF |
476 | int genphy_setup_forced(struct phy_device *phydev); |
477 | int genphy_restart_aneg(struct phy_device *phydev); | |
478 | int genphy_config_aneg(struct phy_device *phydev); | |
479 | int genphy_update_link(struct phy_device *phydev); | |
480 | int genphy_read_status(struct phy_device *phydev); | |
0f0ca340 GC |
481 | int genphy_suspend(struct phy_device *phydev); |
482 | int genphy_resume(struct phy_device *phydev); | |
00db8189 AF |
483 | void phy_driver_unregister(struct phy_driver *drv); |
484 | int phy_driver_register(struct phy_driver *new_driver); | |
485 | void phy_prepare_link(struct phy_device *phydev, | |
486 | void (*adjust_link)(struct net_device *)); | |
487 | void phy_start_machine(struct phy_device *phydev, | |
488 | void (*handler)(struct net_device *)); | |
489 | void phy_stop_machine(struct phy_device *phydev); | |
490 | int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
491 | int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd); | |
492 | int phy_mii_ioctl(struct phy_device *phydev, | |
493 | struct mii_ioctl_data *mii_data, int cmd); | |
e1393456 AF |
494 | int phy_start_interrupts(struct phy_device *phydev); |
495 | void phy_print_status(struct phy_device *phydev); | |
11b0bacd | 496 | struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id); |
6f4a7f41 | 497 | void phy_device_free(struct phy_device *phydev); |
00db8189 | 498 | |
f62220d3 AF |
499 | int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask, |
500 | int (*run)(struct phy_device *)); | |
501 | int phy_register_fixup_for_id(const char *bus_id, | |
502 | int (*run)(struct phy_device *)); | |
503 | int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask, | |
504 | int (*run)(struct phy_device *)); | |
505 | int phy_scan_fixups(struct phy_device *phydev); | |
506 | ||
9b9a8bfc AF |
507 | int __init mdio_bus_init(void); |
508 | void mdio_bus_exit(void); | |
509 | ||
00db8189 | 510 | extern struct bus_type mdio_bus_type; |
00db8189 | 511 | #endif /* __PHY_H */ |