projects / deliverable / linux.git / blame
| Commit | Line | Data |
|---|---|---|
| 48d335ba MB |
1 | /* |
| 2 | * fixed.h | |
| 3 | * | |
| 4 | * Copyright 2008 Wolfson Microelectronics PLC. | |
| 5 | * | |
| 6 | * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> | |
| 7 | * | |
| 86d9884b RQ |
8 | * Copyright (c) 2009 Nokia Corporation |
| 9 | * Roger Quadros <ext-roger.quadros@nokia.com> | |
| 10 | * | |
| 48d335ba MB |
11 | * This program is free software; you can redistribute it and/or |
| 12 | * modify it under the terms of the GNU General Public License as | |
| 13 | * published by the Free Software Foundation; either version 2 of the | |
| 14 | * License, or (at your option) any later version. | |
| 15 | */ | |
| 16 | ||
| 17 | #ifndef __REGULATOR_FIXED_H | |
| 18 | #define __REGULATOR_FIXED_H | |
| 19 | ||
| bcf3402c MB |
20 | struct regulator_init_data; |
| 21 | ||
| 86d9884b RQ |
22 | /** |
| 23 | * struct fixed_voltage_config - fixed_voltage_config structure | |
| 24 | * @supply_name: Name of the regulator supply | |
| 25 | * @microvolts: Output voltage of regulator | |
| 26 | * @gpio: GPIO to use for enable control | |
| 27 | * set to -EINVAL if not used | |
| eda79a30 | 28 | * @startup_delay: Start-up time in microseconds |
| a4d9f179 LD |
29 | * @gpio_is_open_drain: Gpio pin is open drain or normal type. |
| 30 | * If it is open drain type then HIGH will be set | |
| 31 | * through PULL-UP with setting gpio as input | |
| 32 | * and low will be set as gpio-output with driven | |
| 33 | * to low. For non-open-drain case, the gpio will | |
| 34 | * will be in output and drive to low/high accordingly. | |
| 86d9884b RQ |
35 | * @enable_high: Polarity of enable GPIO |
| 36 | * 1 = Active high, 0 = Active low | |
| 37 | * @enabled_at_boot: Whether regulator has been enabled at | |
| 38 | * boot or not. 1 = Yes, 0 = No | |
| 39 | * This is used to keep the regulator at | |
| 40 | * the default state | |
| 41 | * @init_data: regulator_init_data | |
| 42 | * | |
| 43 | * This structure contains fixed voltage regulator configuration | |
| 44 | * information that must be passed by platform code to the fixed | |
| 45 | * voltage regulator driver. | |
| 46 | */ | |
| 48d335ba MB |
47 | struct fixed_voltage_config { |
| 48 | const char *supply_name; | |
| 49 | int microvolts; | |
| 86d9884b | 50 | int gpio; |
| eda79a30 | 51 | unsigned startup_delay; |
| a4d9f179 | 52 | unsigned gpio_is_open_drain:1; |
| 86d9884b RQ |
53 | unsigned enable_high:1; |
| 54 | unsigned enabled_at_boot:1; | |
| bcf3402c | 55 | struct regulator_init_data *init_data; |
| 48d335ba MB |
56 | }; |
| 57 | ||
| 613330a0 SH |
58 | struct regulator_consumer_supply; |
| 59 | ||
| 60 | #if IS_ENABLED(CONFIG_REGULATOR) | |
| 61 | struct platform_device *regulator_register_fixed(int id, | |
| 62 | struct regulator_consumer_supply *supplies, int num_supplies); | |
| 63 | #else | |
| 64 | static inline struct platform_device *regulator_register_fixed(int id, | |
| 65 | struct regulator_consumer_supply *supplies, int num_supplies) | |
| 66 | { | |
| 67 | return NULL; | |
| 68 | } | |
| 69 | #endif | |
| 70 | ||
| 48d335ba | 71 | #endif |