Commit | Line | Data |
---|---|---|
1da177e4 LT |
1 | /* |
2 | * Copyright (c) 2001-2002 by David Brownell | |
3 | * | |
4 | * This program is free software; you can redistribute it and/or modify it | |
5 | * under the terms of the GNU General Public License as published by the | |
6 | * Free Software Foundation; either version 2 of the License, or (at your | |
7 | * option) any later version. | |
8 | * | |
9 | * This program is distributed in the hope that it will be useful, but | |
10 | * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
11 | * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
12 | * for more details. | |
13 | * | |
14 | * You should have received a copy of the GNU General Public License | |
15 | * along with this program; if not, write to the Free Software Foundation, | |
16 | * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
17 | */ | |
18 | ||
aa459e6a AV |
19 | #ifndef __USB_CORE_HCD_H |
20 | #define __USB_CORE_HCD_H | |
1da177e4 LT |
21 | |
22 | #ifdef __KERNEL__ | |
23 | ||
32fe0198 AS |
24 | #include <linux/rwsem.h> |
25 | ||
38f3ad5e FB |
26 | #define MAX_TOPO_LEVEL 6 |
27 | ||
1da177e4 LT |
28 | /* This file contains declarations of usbcore internals that are mostly |
29 | * used or exposed by Host Controller Drivers. | |
30 | */ | |
31 | ||
32 | /* | |
33 | * USB Packet IDs (PIDs) | |
34 | */ | |
dbe0dbb7 | 35 | #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */ |
1da177e4 LT |
36 | #define USB_PID_OUT 0xe1 |
37 | #define USB_PID_ACK 0xd2 | |
38 | #define USB_PID_DATA0 0xc3 | |
39 | #define USB_PID_PING 0xb4 /* USB 2.0 */ | |
40 | #define USB_PID_SOF 0xa5 | |
41 | #define USB_PID_NYET 0x96 /* USB 2.0 */ | |
42 | #define USB_PID_DATA2 0x87 /* USB 2.0 */ | |
43 | #define USB_PID_SPLIT 0x78 /* USB 2.0 */ | |
44 | #define USB_PID_IN 0x69 | |
45 | #define USB_PID_NAK 0x5a | |
46 | #define USB_PID_DATA1 0x4b | |
47 | #define USB_PID_PREAMBLE 0x3c /* Token mode */ | |
48 | #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */ | |
49 | #define USB_PID_SETUP 0x2d | |
50 | #define USB_PID_STALL 0x1e | |
51 | #define USB_PID_MDATA 0x0f /* USB 2.0 */ | |
52 | ||
53 | /*-------------------------------------------------------------------------*/ | |
54 | ||
55 | /* | |
56 | * USB Host Controller Driver (usb_hcd) framework | |
57 | * | |
58 | * Since "struct usb_bus" is so thin, you can't share much code in it. | |
59 | * This framework is a layer over that, and should be more sharable. | |
5234ce1b IPG |
60 | * |
61 | * @authorized_default: Specifies if new devices are authorized to | |
62 | * connect by default or they require explicit | |
63 | * user space authorization; this bit is settable | |
64 | * through /sys/class/usb_host/X/authorized_default. | |
65 | * For the rest is RO, so we don't lock to r/w it. | |
1da177e4 LT |
66 | */ |
67 | ||
68 | /*-------------------------------------------------------------------------*/ | |
69 | ||
17200583 | 70 | struct usb_hcd { |
1da177e4 LT |
71 | |
72 | /* | |
73 | * housekeeping | |
74 | */ | |
75 | struct usb_bus self; /* hcd is-a bus */ | |
17200583 | 76 | struct kref kref; /* reference counter */ |
1da177e4 LT |
77 | |
78 | const char *product_desc; /* product/vendor string */ | |
79 | char irq_descr[24]; /* driver + bus # */ | |
80 | ||
d5926ae7 AS |
81 | struct timer_list rh_timer; /* drives root-hub polling */ |
82 | struct urb *status_urb; /* the current status urb */ | |
9bbdf1e0 | 83 | #ifdef CONFIG_USB_SUSPEND |
6b157c9b AS |
84 | struct work_struct wakeup_work; /* for remote wakeup */ |
85 | #endif | |
1da177e4 LT |
86 | |
87 | /* | |
88 | * hardware info/state | |
89 | */ | |
90 | const struct hc_driver *driver; /* hw-specific hooks */ | |
8de98402 | 91 | |
541c7d43 AS |
92 | /* Flags that need to be manipulated atomically because they can |
93 | * change while the host controller is running. Always use | |
94 | * set_bit() or clear_bit() to change their values. | |
95 | */ | |
8de98402 | 96 | unsigned long flags; |
541c7d43 AS |
97 | #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */ |
98 | #define HCD_FLAG_SAW_IRQ 1 | |
99 | #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */ | |
100 | #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */ | |
ff2f0787 | 101 | #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */ |
9b37596a AS |
102 | #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */ |
103 | #define HCD_FLAG_DEAD 6 /* controller has died? */ | |
541c7d43 AS |
104 | |
105 | /* The flags can be tested using these macros; they are likely to | |
106 | * be slightly faster than test_bit(). | |
107 | */ | |
108 | #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE)) | |
109 | #define HCD_SAW_IRQ(hcd) ((hcd)->flags & (1U << HCD_FLAG_SAW_IRQ)) | |
110 | #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH)) | |
111 | #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING)) | |
ff2f0787 | 112 | #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING)) |
9b37596a AS |
113 | #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING)) |
114 | #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD)) | |
8de98402 | 115 | |
541c7d43 | 116 | /* Flags that get set only during HCD registration or removal. */ |
1da177e4 | 117 | unsigned rh_registered:1;/* is root hub registered? */ |
6d88e679 | 118 | unsigned rh_pollable:1; /* may we poll the root hub? */ |
0029227f | 119 | unsigned msix_enabled:1; /* driver has MSI-X enabled? */ |
1da177e4 | 120 | |
d5926ae7 AS |
121 | /* The next flag is a stopgap, to be removed when all the HCDs |
122 | * support the new root-hub polling mechanism. */ | |
123 | unsigned uses_new_polling:1; | |
0165de09 | 124 | unsigned wireless:1; /* Wireless USB HCD */ |
5234ce1b | 125 | unsigned authorized_default:1; |
7329e211 | 126 | unsigned has_tt:1; /* Integrated TT in root hub */ |
d5926ae7 | 127 | |
1da177e4 LT |
128 | int irq; /* irq allocated */ |
129 | void __iomem *regs; /* device memory/io */ | |
130 | u64 rsrc_start; /* memory/io resource start */ | |
131 | u64 rsrc_len; /* memory/io resource length */ | |
7d35b929 | 132 | unsigned power_budget; /* in mA, 0 = no limit */ |
1da177e4 | 133 | |
3f0479e0 SS |
134 | /* bandwidth_mutex should be taken before adding or removing |
135 | * any new bus bandwidth constraints: | |
136 | * 1. Before adding a configuration for a new device. | |
137 | * 2. Before removing the configuration to put the device into | |
138 | * the addressed state. | |
139 | * 3. Before selecting a different configuration. | |
140 | * 4. Before selecting an alternate interface setting. | |
141 | * | |
142 | * bandwidth_mutex should be dropped after a successful control message | |
143 | * to the device, or resetting the bandwidth after a failed attempt. | |
144 | */ | |
145 | struct mutex bandwidth_mutex; | |
146 | ||
147 | ||
1da177e4 | 148 | #define HCD_BUFFER_POOLS 4 |
0858a3a5 | 149 | struct dma_pool *pool[HCD_BUFFER_POOLS]; |
1da177e4 LT |
150 | |
151 | int state; | |
152 | # define __ACTIVE 0x01 | |
153 | # define __SUSPEND 0x04 | |
154 | # define __TRANSIENT 0x80 | |
155 | ||
156 | # define HC_STATE_HALT 0 | |
157 | # define HC_STATE_RUNNING (__ACTIVE) | |
158 | # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE) | |
159 | # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT) | |
160 | # define HC_STATE_SUSPENDED (__SUSPEND) | |
161 | ||
162 | #define HC_IS_RUNNING(state) ((state) & __ACTIVE) | |
163 | #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND) | |
164 | ||
165 | /* more shared queuing code would be good; it should support | |
166 | * smarter scheduling, handle transaction translators, etc; | |
84cca820 | 167 | * input size of periodic table to an interrupt scheduler. |
1da177e4 LT |
168 | * (ohci 32, uhci 1024, ehci 256/512/1024). |
169 | */ | |
170 | ||
171 | /* The HC driver's private data is stored at the end of | |
172 | * this structure. | |
173 | */ | |
174 | unsigned long hcd_priv[0] | |
84cca820 | 175 | __attribute__ ((aligned(sizeof(unsigned long)))); |
1da177e4 LT |
176 | }; |
177 | ||
178 | /* 2.4 does this a bit differently ... */ | |
84cca820 | 179 | static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd) |
1da177e4 LT |
180 | { |
181 | return &hcd->self; | |
182 | } | |
183 | ||
84cca820 | 184 | static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus) |
17200583 AS |
185 | { |
186 | return container_of(bus, struct usb_hcd, self); | |
187 | } | |
1da177e4 LT |
188 | |
189 | struct hcd_timeout { /* timeouts we allocate */ | |
190 | struct list_head timeout_list; | |
191 | struct timer_list timer; | |
192 | }; | |
193 | ||
194 | /*-------------------------------------------------------------------------*/ | |
195 | ||
1da177e4 | 196 | |
1da177e4 LT |
197 | struct hc_driver { |
198 | const char *description; /* "ehci-hcd" etc */ | |
199 | const char *product_desc; /* product/vendor string */ | |
200 | size_t hcd_priv_size; /* size of private data */ | |
201 | ||
202 | /* irq handler */ | |
7d12e780 | 203 | irqreturn_t (*irq) (struct usb_hcd *hcd); |
1da177e4 LT |
204 | |
205 | int flags; | |
206 | #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */ | |
b3476675 | 207 | #define HCD_LOCAL_MEM 0x0002 /* HC needs local memory */ |
1da177e4 LT |
208 | #define HCD_USB11 0x0010 /* USB 1.1 */ |
209 | #define HCD_USB2 0x0020 /* USB 2.0 */ | |
66d4eadd | 210 | #define HCD_USB3 0x0040 /* USB 3.0 */ |
6b403b02 | 211 | #define HCD_MASK 0x0070 |
1da177e4 LT |
212 | |
213 | /* called to init HCD and root hub */ | |
214 | int (*reset) (struct usb_hcd *hcd); | |
215 | int (*start) (struct usb_hcd *hcd); | |
216 | ||
217 | /* NOTE: these suspend/resume calls relate to the HC as | |
5f827ea3 | 218 | * a whole, not just the root hub; they're for PCI bus glue. |
1da177e4 | 219 | */ |
5f827ea3 | 220 | /* called after suspending the hub, before entering D3 etc */ |
4147200d | 221 | int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup); |
1da177e4 | 222 | |
5f827ea3 | 223 | /* called after entering D0 (etc), before resuming the hub */ |
6ec4beb5 | 224 | int (*pci_resume)(struct usb_hcd *hcd, bool hibernated); |
1da177e4 LT |
225 | |
226 | /* cleanly make HCD stop writing memory and doing I/O */ | |
227 | void (*stop) (struct usb_hcd *hcd); | |
228 | ||
64a21d02 AG |
229 | /* shutdown HCD */ |
230 | void (*shutdown) (struct usb_hcd *hcd); | |
231 | ||
1da177e4 LT |
232 | /* return current frame number */ |
233 | int (*get_frame_number) (struct usb_hcd *hcd); | |
234 | ||
235 | /* manage i/o requests, device state */ | |
e9df41c5 AS |
236 | int (*urb_enqueue)(struct usb_hcd *hcd, |
237 | struct urb *urb, gfp_t mem_flags); | |
238 | int (*urb_dequeue)(struct usb_hcd *hcd, | |
239 | struct urb *urb, int status); | |
1da177e4 | 240 | |
2694a48d RM |
241 | /* |
242 | * (optional) these hooks allow an HCD to override the default DMA | |
243 | * mapping and unmapping routines. In general, they shouldn't be | |
244 | * necessary unless the host controller has special DMA requirements, | |
245 | * such as alignment contraints. If these are not specified, the | |
246 | * general usb_hcd_(un)?map_urb_for_dma functions will be used instead | |
247 | * (and it may be a good idea to call these functions in your HCD | |
248 | * implementation) | |
249 | */ | |
250 | int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb, | |
251 | gfp_t mem_flags); | |
252 | void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb); | |
253 | ||
1da177e4 | 254 | /* hw synch, freeing endpoint resources that urb_dequeue can't */ |
0858a3a5 | 255 | void (*endpoint_disable)(struct usb_hcd *hcd, |
1da177e4 LT |
256 | struct usb_host_endpoint *ep); |
257 | ||
3444b26a DV |
258 | /* (optional) reset any endpoint state such as sequence number |
259 | and current window */ | |
0858a3a5 | 260 | void (*endpoint_reset)(struct usb_hcd *hcd, |
3444b26a DV |
261 | struct usb_host_endpoint *ep); |
262 | ||
1da177e4 | 263 | /* root hub support */ |
84cca820 GKH |
264 | int (*hub_status_data) (struct usb_hcd *hcd, char *buf); |
265 | int (*hub_control) (struct usb_hcd *hcd, | |
1da177e4 LT |
266 | u16 typeReq, u16 wValue, u16 wIndex, |
267 | char *buf, u16 wLength); | |
84cca820 GKH |
268 | int (*bus_suspend)(struct usb_hcd *); |
269 | int (*bus_resume)(struct usb_hcd *); | |
270 | int (*start_port_reset)(struct usb_hcd *, unsigned port_num); | |
90da096e BR |
271 | |
272 | /* force handover of high-speed port to full-speed companion */ | |
84cca820 | 273 | void (*relinquish_port)(struct usb_hcd *, int); |
3a31155c AS |
274 | /* has a port been handed over to a companion? */ |
275 | int (*port_handed_over)(struct usb_hcd *, int); | |
c6515272 | 276 | |
cb88a1b8 AS |
277 | /* CLEAR_TT_BUFFER completion callback */ |
278 | void (*clear_tt_buffer_complete)(struct usb_hcd *, | |
279 | struct usb_host_endpoint *); | |
280 | ||
c6515272 SS |
281 | /* xHCI specific functions */ |
282 | /* Called by usb_alloc_dev to alloc HC device structures */ | |
283 | int (*alloc_dev)(struct usb_hcd *, struct usb_device *); | |
f7410ced | 284 | /* Called by usb_disconnect to free HC device structures */ |
c6515272 | 285 | void (*free_dev)(struct usb_hcd *, struct usb_device *); |
eab1cafc SS |
286 | /* Change a group of bulk endpoints to support multiple stream IDs */ |
287 | int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev, | |
288 | struct usb_host_endpoint **eps, unsigned int num_eps, | |
289 | unsigned int num_streams, gfp_t mem_flags); | |
290 | /* Reverts a group of bulk endpoints back to not using stream IDs. | |
291 | * Can fail if we run out of memory. | |
292 | */ | |
293 | int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev, | |
294 | struct usb_host_endpoint **eps, unsigned int num_eps, | |
295 | gfp_t mem_flags); | |
79abb1ab SS |
296 | |
297 | /* Bandwidth computation functions */ | |
298 | /* Note that add_endpoint() can only be called once per endpoint before | |
299 | * check_bandwidth() or reset_bandwidth() must be called. | |
300 | * drop_endpoint() can only be called once per endpoint also. | |
0858a3a5 GKH |
301 | * A call to xhci_drop_endpoint() followed by a call to |
302 | * xhci_add_endpoint() will add the endpoint to the schedule with | |
303 | * possibly new parameters denoted by a different endpoint descriptor | |
304 | * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a | |
305 | * call to xhci_drop_endpoint() is not allowed. | |
79abb1ab SS |
306 | */ |
307 | /* Allocate endpoint resources and add them to a new schedule */ | |
0858a3a5 GKH |
308 | int (*add_endpoint)(struct usb_hcd *, struct usb_device *, |
309 | struct usb_host_endpoint *); | |
79abb1ab | 310 | /* Drop an endpoint from a new schedule */ |
0858a3a5 GKH |
311 | int (*drop_endpoint)(struct usb_hcd *, struct usb_device *, |
312 | struct usb_host_endpoint *); | |
79abb1ab SS |
313 | /* Check that a new hardware configuration, set using |
314 | * endpoint_enable and endpoint_disable, does not exceed bus | |
315 | * bandwidth. This must be called before any set configuration | |
316 | * or set interface requests are sent to the device. | |
317 | */ | |
318 | int (*check_bandwidth)(struct usb_hcd *, struct usb_device *); | |
319 | /* Reset the device schedule to the last known good schedule, | |
320 | * which was set from a previous successful call to | |
321 | * check_bandwidth(). This reverts any add_endpoint() and | |
322 | * drop_endpoint() calls since that last successful call. | |
323 | * Used for when a check_bandwidth() call fails due to resource | |
324 | * or bandwidth constraints. | |
325 | */ | |
326 | void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *); | |
c6515272 SS |
327 | /* Returns the hardware-chosen device address */ |
328 | int (*address_device)(struct usb_hcd *, struct usb_device *udev); | |
b356b7c7 SS |
329 | /* Notifies the HCD after a hub descriptor is fetched. |
330 | * Will block. | |
331 | */ | |
332 | int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev, | |
333 | struct usb_tt *tt, gfp_t mem_flags); | |
a5f0efab | 334 | int (*reset_device)(struct usb_hcd *, struct usb_device *); |
48f24970 AD |
335 | /* Notifies the HCD after a device is connected and its |
336 | * address is set | |
337 | */ | |
338 | int (*update_device)(struct usb_hcd *, struct usb_device *); | |
1da177e4 LT |
339 | }; |
340 | ||
e9df41c5 AS |
341 | extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); |
342 | extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, | |
343 | int status); | |
344 | extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb); | |
345 | ||
84cca820 GKH |
346 | extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); |
347 | extern int usb_hcd_unlink_urb(struct urb *urb, int status); | |
4a00027d AS |
348 | extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, |
349 | int status); | |
2694a48d RM |
350 | extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, |
351 | gfp_t mem_flags); | |
c8cf203a RM |
352 | extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *); |
353 | extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); | |
95cf82f9 AS |
354 | extern void usb_hcd_flush_endpoint(struct usb_device *udev, |
355 | struct usb_host_endpoint *ep); | |
356 | extern void usb_hcd_disable_endpoint(struct usb_device *udev, | |
a6d2bb9f | 357 | struct usb_host_endpoint *ep); |
3444b26a DV |
358 | extern void usb_hcd_reset_endpoint(struct usb_device *udev, |
359 | struct usb_host_endpoint *ep); | |
cde217a5 | 360 | extern void usb_hcd_synchronize_unlinks(struct usb_device *udev); |
3f0479e0 | 361 | extern int usb_hcd_alloc_bandwidth(struct usb_device *udev, |
79abb1ab | 362 | struct usb_host_config *new_config, |
3f0479e0 SS |
363 | struct usb_host_interface *old_alt, |
364 | struct usb_host_interface *new_alt); | |
84cca820 | 365 | extern int usb_hcd_get_frame_number(struct usb_device *udev); |
1da177e4 | 366 | |
84cca820 | 367 | extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, |
1b26da15 | 368 | struct device *dev, const char *bus_name); |
84cca820 GKH |
369 | extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd); |
370 | extern void usb_put_hcd(struct usb_hcd *hcd); | |
1da177e4 LT |
371 | extern int usb_add_hcd(struct usb_hcd *hcd, |
372 | unsigned int irqnum, unsigned long irqflags); | |
373 | extern void usb_remove_hcd(struct usb_hcd *hcd); | |
374 | ||
64a21d02 | 375 | struct platform_device; |
84cca820 | 376 | extern void usb_hcd_platform_shutdown(struct platform_device *dev); |
64a21d02 | 377 | |
1da177e4 LT |
378 | #ifdef CONFIG_PCI |
379 | struct pci_dev; | |
380 | struct pci_device_id; | |
84cca820 | 381 | extern int usb_hcd_pci_probe(struct pci_dev *dev, |
1da177e4 | 382 | const struct pci_device_id *id); |
84cca820 | 383 | extern void usb_hcd_pci_remove(struct pci_dev *dev); |
84cca820 | 384 | extern void usb_hcd_pci_shutdown(struct pci_dev *dev); |
64a21d02 | 385 | |
abb30641 | 386 | #ifdef CONFIG_PM_SLEEP |
47145210 | 387 | extern const struct dev_pm_ops usb_hcd_pci_pm_ops; |
abb30641 | 388 | #endif |
1da177e4 LT |
389 | #endif /* CONFIG_PCI */ |
390 | ||
391 | /* pci-ish (pdev null is ok) buffer alloc/mapping support */ | |
84cca820 GKH |
392 | int hcd_buffer_create(struct usb_hcd *hcd); |
393 | void hcd_buffer_destroy(struct usb_hcd *hcd); | |
1da177e4 | 394 | |
84cca820 | 395 | void *hcd_buffer_alloc(struct usb_bus *bus, size_t size, |
55016f10 | 396 | gfp_t mem_flags, dma_addr_t *dma); |
84cca820 | 397 | void hcd_buffer_free(struct usb_bus *bus, size_t size, |
1da177e4 LT |
398 | void *addr, dma_addr_t dma); |
399 | ||
400 | /* generic bus glue, needed for host controllers that don't use PCI */ | |
84cca820 | 401 | extern irqreturn_t usb_hcd_irq(int irq, void *__hcd); |
d5926ae7 | 402 | |
84cca820 | 403 | extern void usb_hc_died(struct usb_hcd *hcd); |
d5926ae7 | 404 | extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd); |
1da177e4 | 405 | |
3444b26a DV |
406 | /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ |
407 | #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) | |
408 | #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) | |
409 | #define usb_settoggle(dev, ep, out, bit) \ | |
410 | ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ | |
411 | ((bit) << (ep))) | |
412 | ||
1da177e4 LT |
413 | /* -------------------------------------------------------------------------- */ |
414 | ||
415 | /* Enumeration is only for the hub driver, or HCD virtual root hubs */ | |
416 | extern struct usb_device *usb_alloc_dev(struct usb_device *parent, | |
417 | struct usb_bus *, unsigned port); | |
418 | extern int usb_new_device(struct usb_device *dev); | |
419 | extern void usb_disconnect(struct usb_device **); | |
420 | ||
421 | extern int usb_get_configuration(struct usb_device *dev); | |
422 | extern void usb_destroy_configuration(struct usb_device *dev); | |
423 | ||
424 | /*-------------------------------------------------------------------------*/ | |
425 | ||
426 | /* | |
427 | * HCD Root Hub support | |
428 | */ | |
429 | ||
d20db4b4 EL |
430 | #include <linux/usb/ch11.h> |
431 | ||
432 | /* | |
433 | * As of USB 2.0, full/low speed devices are segregated into trees. | |
434 | * One type grows from USB 1.1 host controllers (OHCI, UHCI etc). | |
435 | * The other type grows from high speed hubs when they connect to | |
436 | * full/low speed devices using "Transaction Translators" (TTs). | |
437 | * | |
438 | * TTs should only be known to the hub driver, and high speed bus | |
439 | * drivers (only EHCI for now). They affect periodic scheduling and | |
440 | * sometimes control/bulk error recovery. | |
441 | */ | |
442 | ||
443 | struct usb_device; | |
444 | ||
445 | struct usb_tt { | |
446 | struct usb_device *hub; /* upstream highspeed hub */ | |
447 | int multi; /* true means one TT per port */ | |
448 | unsigned think_time; /* think time in ns */ | |
449 | ||
450 | /* for control/bulk error recovery (CLEAR_TT_BUFFER) */ | |
451 | spinlock_t lock; | |
452 | struct list_head clear_list; /* of usb_tt_clear */ | |
453 | struct work_struct clear_work; | |
454 | }; | |
455 | ||
456 | struct usb_tt_clear { | |
457 | struct list_head clear_list; | |
458 | unsigned tt; | |
459 | u16 devinfo; | |
460 | struct usb_hcd *hcd; | |
461 | struct usb_host_endpoint *ep; | |
462 | }; | |
463 | ||
464 | extern int usb_hub_clear_tt_buffer(struct urb *urb); | |
465 | extern void usb_ep0_reinit(struct usb_device *); | |
1da177e4 LT |
466 | |
467 | /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */ | |
468 | #define DeviceRequest \ | |
469 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) | |
470 | #define DeviceOutRequest \ | |
471 | ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8) | |
472 | ||
473 | #define InterfaceRequest \ | |
474 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
475 | ||
476 | #define EndpointRequest \ | |
477 | ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
478 | #define EndpointOutRequest \ | |
479 | ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8) | |
480 | ||
481 | /* class requests from the USB 2.0 hub spec, table 11-15 */ | |
482 | /* GetBusState and SetHubDescriptor are optional, omitted */ | |
483 | #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) | |
484 | #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) | |
485 | #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) | |
486 | #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) | |
487 | #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) | |
488 | #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) | |
489 | #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) | |
490 | ||
491 | ||
492 | /*-------------------------------------------------------------------------*/ | |
0eadcc09 TB |
493 | |
494 | /* class requests from USB 3.0 hub spec, table 10-5 */ | |
495 | #define SetHubDepth (0x3000 | HUB_SET_DEPTH) | |
496 | #define GetPortErrorCount (0x8000 | HUB_GET_PORT_ERR_COUNT) | |
1da177e4 LT |
497 | |
498 | /* | |
499 | * Generic bandwidth allocation constants/support | |
500 | */ | |
501 | #define FRAME_TIME_USECS 1000L | |
84cca820 | 502 | #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */ |
1da177e4 | 503 | /* Trying not to use worst-case bit-stuffing |
84cca820 | 504 | * of (7/6 * 8 * bytecount) = 9.33 * bytecount */ |
1da177e4 LT |
505 | /* bytecount = data payload byte count */ |
506 | ||
507 | #define NS_TO_US(ns) ((ns + 500L) / 1000L) | |
508 | /* convert & round nanoseconds to microseconds */ | |
509 | ||
1da177e4 LT |
510 | |
511 | /* | |
512 | * Full/low speed bandwidth allocation constants/support. | |
513 | */ | |
514 | #define BW_HOST_DELAY 1000L /* nanoseconds */ | |
515 | #define BW_HUB_LS_SETUP 333L /* nanoseconds */ | |
84cca820 | 516 | /* 4 full-speed bit times (est.) */ |
1da177e4 | 517 | |
84cca820 | 518 | #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */ |
1da177e4 LT |
519 | #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L) |
520 | #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L) | |
521 | ||
1da177e4 | 522 | /* |
498f78e6 | 523 | * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed |
1da177e4 LT |
524 | * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed |
525 | * to preallocate bandwidth) | |
526 | */ | |
527 | #define USB2_HOST_DELAY 5 /* nsec, guess */ | |
84cca820 | 528 | #define HS_NSECS(bytes) (((55 * 8 * 2083) \ |
f956e7cd | 529 | + (2083UL * (3 + BitTime(bytes))))/1000 \ |
1da177e4 | 530 | + USB2_HOST_DELAY) |
84cca820 | 531 | #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \ |
f956e7cd | 532 | + (2083UL * (3 + BitTime(bytes))))/1000 \ |
1da177e4 | 533 | + USB2_HOST_DELAY) |
0858a3a5 GKH |
534 | #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes)) |
535 | #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes)) | |
1da177e4 | 536 | |
84cca820 | 537 | extern long usb_calc_bus_time(int speed, int is_input, |
1da177e4 LT |
538 | int isoc, int bytecount); |
539 | ||
540 | /*-------------------------------------------------------------------------*/ | |
541 | ||
1da177e4 LT |
542 | extern void usb_set_device_state(struct usb_device *udev, |
543 | enum usb_device_state new_state); | |
544 | ||
545 | /*-------------------------------------------------------------------------*/ | |
546 | ||
547 | /* exported only within usbcore */ | |
548 | ||
549 | extern struct list_head usb_bus_list; | |
4186ecf8 | 550 | extern struct mutex usb_bus_list_lock; |
1da177e4 LT |
551 | extern wait_queue_head_t usb_kill_urb_queue; |
552 | ||
84cca820 | 553 | extern int usb_find_interface_driver(struct usb_device *dev, |
1da177e4 LT |
554 | struct usb_interface *interface); |
555 | ||
556 | #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN)) | |
557 | ||
0c0382e3 | 558 | #ifdef CONFIG_PM |
84cca820 | 559 | extern void usb_root_hub_lost_power(struct usb_device *rhdev); |
65bfd296 AS |
560 | extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg); |
561 | extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg); | |
9bbdf1e0 AS |
562 | #endif /* CONFIG_PM */ |
563 | ||
564 | #ifdef CONFIG_USB_SUSPEND | |
565 | extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd); | |
0c0382e3 | 566 | #else |
db2d55b7 AM |
567 | static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd) |
568 | { | |
569 | return; | |
570 | } | |
9bbdf1e0 AS |
571 | #endif /* CONFIG_USB_SUSPEND */ |
572 | ||
0c0382e3 | 573 | |
1da177e4 LT |
574 | /* |
575 | * USB device fs stuff | |
576 | */ | |
577 | ||
578 | #ifdef CONFIG_USB_DEVICEFS | |
579 | ||
580 | /* | |
581 | * these are expected to be called from the USB core/hub thread | |
582 | * with the kernel lock held | |
583 | */ | |
84cca820 | 584 | extern void usbfs_update_special(void); |
1da177e4 LT |
585 | extern int usbfs_init(void); |
586 | extern void usbfs_cleanup(void); | |
587 | ||
588 | #else /* CONFIG_USB_DEVICEFS */ | |
589 | ||
84cca820 | 590 | static inline void usbfs_update_special(void) {} |
1da177e4 LT |
591 | static inline int usbfs_init(void) { return 0; } |
592 | static inline void usbfs_cleanup(void) { } | |
593 | ||
594 | #endif /* CONFIG_USB_DEVICEFS */ | |
595 | ||
596 | /*-------------------------------------------------------------------------*/ | |
597 | ||
f150fa1a | 598 | #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE) |
1da177e4 LT |
599 | |
600 | struct usb_mon_operations { | |
601 | void (*urb_submit)(struct usb_bus *bus, struct urb *urb); | |
602 | void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err); | |
9347d51c | 603 | void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status); |
1da177e4 | 604 | /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */ |
1da177e4 LT |
605 | }; |
606 | ||
607 | extern struct usb_mon_operations *mon_ops; | |
608 | ||
609 | static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) | |
610 | { | |
611 | if (bus->monitored) | |
612 | (*mon_ops->urb_submit)(bus, urb); | |
613 | } | |
614 | ||
615 | static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, | |
616 | int error) | |
617 | { | |
618 | if (bus->monitored) | |
619 | (*mon_ops->urb_submit_error)(bus, urb, error); | |
620 | } | |
621 | ||
9347d51c AS |
622 | static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, |
623 | int status) | |
1da177e4 LT |
624 | { |
625 | if (bus->monitored) | |
9347d51c | 626 | (*mon_ops->urb_complete)(bus, urb, status); |
1da177e4 | 627 | } |
1da177e4 LT |
628 | |
629 | int usb_mon_register(struct usb_mon_operations *ops); | |
630 | void usb_mon_deregister(void); | |
631 | ||
632 | #else | |
633 | ||
634 | static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {} | |
635 | static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb, | |
636 | int error) {} | |
9347d51c AS |
637 | static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb, |
638 | int status) {} | |
1da177e4 | 639 | |
f150fa1a | 640 | #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */ |
1da177e4 | 641 | |
1da177e4 LT |
642 | /*-------------------------------------------------------------------------*/ |
643 | ||
644 | /* random stuff */ | |
645 | ||
84cca820 GKH |
646 | #define RUN_CONTEXT (in_irq() ? "in_irq" \ |
647 | : (in_interrupt() ? "in_interrupt" : "can sleep")) | |
1da177e4 LT |
648 | |
649 | ||
32fe0198 AS |
650 | /* This rwsem is for use only by the hub driver and ehci-hcd. |
651 | * Nobody else should touch it. | |
652 | */ | |
653 | extern struct rw_semaphore ehci_cf_port_reset_rwsem; | |
1da177e4 | 654 | |
9beeee65 AS |
655 | /* Keep track of which host controller drivers are loaded */ |
656 | #define USB_UHCI_LOADED 0 | |
657 | #define USB_OHCI_LOADED 1 | |
658 | #define USB_EHCI_LOADED 2 | |
659 | extern unsigned long usb_hcds_loaded; | |
660 | ||
32fe0198 | 661 | #endif /* __KERNEL__ */ |
aa459e6a AV |
662 | |
663 | #endif /* __USB_CORE_HCD_H */ |