tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
[deliverable/linux.git] / include / linux / usb / wusb-wa.h
CommitLineData
c7f73648
IPG
1/*
2 * Wireless USB Wire Adapter constants and structures.
3 *
4 * Copyright (C) 2005-2006 Intel Corporation.
5 * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License version
9 * 2 as published by the Free Software Foundation.
10 *
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
15 *
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
19 * 02110-1301, USA.
20 *
21 *
22 * FIXME: docs
23 * FIXME: organize properly, group logically
24 *
25 * All the event structures are defined in uwb/spec.h, as they are
26 * common to the WHCI and WUSB radio control interfaces.
27 *
28 * References:
29 * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
30 */
31#ifndef __LINUX_USB_WUSB_WA_H
32#define __LINUX_USB_WUSB_WA_H
33
34/**
35 * Radio Command Request for the Radio Control Interface
36 *
37 * Radio Control Interface command and event codes are the same as
38 * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
39 */
40enum {
41 WA_EXEC_RC_CMD = 40, /* Radio Control command Request */
42};
43
44/* Wireless Adapter Requests ([WUSB] table 8-51) */
45enum {
46 WUSB_REQ_ADD_MMC_IE = 20,
47 WUSB_REQ_REMOVE_MMC_IE = 21,
48 WUSB_REQ_SET_NUM_DNTS = 22,
49 WUSB_REQ_SET_CLUSTER_ID = 23,
50 WUSB_REQ_SET_DEV_INFO = 24,
51 WUSB_REQ_GET_TIME = 25,
52 WUSB_REQ_SET_STREAM_IDX = 26,
53 WUSB_REQ_SET_WUSB_MAS = 27,
4d2bea4c 54 WUSB_REQ_CHAN_STOP = 28,
c7f73648
IPG
55};
56
57
58/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
59enum {
60 WUSB_TIME_ADJ = 0,
61 WUSB_TIME_BPST = 1,
62 WUSB_TIME_WUSB = 2,
63};
64
65enum {
66 WA_ENABLE = 0x01,
67 WA_RESET = 0x02,
68 RPIPE_PAUSE = 0x1,
6d33f7bb 69 RPIPE_STALL = 0x2,
c7f73648
IPG
70};
71
72/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
73enum {
74 WA_STATUS_ENABLED = 0x01,
75 WA_STATUS_RESETTING = 0x02
76};
77
78enum rpipe_crs {
79 RPIPE_CRS_CTL = 0x01,
80 RPIPE_CRS_ISO = 0x02,
81 RPIPE_CRS_BULK = 0x04,
82 RPIPE_CRS_INTR = 0x08
83};
84
85/**
86 * RPipe descriptor ([WUSB] section 8.5.2.11)
87 *
88 * FIXME: explain rpipes
89 */
90struct usb_rpipe_descriptor {
0858a3a5 91 u8 bLength;
c7f73648
IPG
92 u8 bDescriptorType;
93 __le16 wRPipeIndex;
94 __le16 wRequests;
95 __le16 wBlocks; /* rw if 0 */
ee0218fa
TP
96 __le16 wMaxPacketSize; /* rw */
97 union {
98 u8 dwa_bHSHubAddress; /* rw: DWA. */
99 u8 hwa_bMaxBurst; /* rw: HWA. */
100 };
101 union {
102 u8 dwa_bHSHubPort; /* rw: DWA. */
103 u8 hwa_bDeviceInfoIndex; /* rw: HWA. */
104 };
c7f73648 105 u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */
ee0218fa
TP
106 union {
107 u8 dwa_bDeviceAddress; /* rw: DWA Target device address. */
108 u8 hwa_reserved; /* rw: HWA. */
109 };
c7f73648
IPG
110 u8 bEndpointAddress; /* rw: Target EP address */
111 u8 bDataSequence; /* ro: Current Data sequence */
112 __le32 dwCurrentWindow; /* ro */
113 u8 bMaxDataSequence; /* ro?: max supported seq */
114 u8 bInterval; /* rw: */
115 u8 bOverTheAirInterval; /* rw: */
116 u8 bmAttribute; /* ro? */
117 u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */
118 u8 bmRetryOptions; /* rw? */
119 __le16 wNumTransactionErrors; /* rw */
120} __attribute__ ((packed));
121
122/**
123 * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
124 *
125 * These are the notifications coming on the notification endpoint of
126 * an HWA and a DWA.
127 */
128enum wa_notif_type {
129 DWA_NOTIF_RWAKE = 0x91,
130 DWA_NOTIF_PORTSTATUS = 0x92,
131 WA_NOTIF_TRANSFER = 0x93,
132 HWA_NOTIF_BPST_ADJ = 0x94,
133 HWA_NOTIF_DN = 0x95,
134};
135
136/**
137 * Wire Adapter notification header
138 *
139 * Notifications coming from a wire adapter use a common header
140 * defined in [WUSB] sections 8.4.5 & 8.5.4.
141 */
142struct wa_notif_hdr {
143 u8 bLength;
144 u8 bNotifyType; /* enum wa_notif_type */
4ae1a5bd 145} __packed;
c7f73648
IPG
146
147/**
148 * HWA DN Received notification [(WUSB] section 8.5.4.2)
149 *
150 * The DNData is specified in WUSB1.0[7.6]. For each device
151 * notification we received, we just need to dispatch it.
152 *
153 * @dndata: this is really an array of notifications, but all start
154 * with the same header.
155 */
156struct hwa_notif_dn {
157 struct wa_notif_hdr hdr;
158 u8 bSourceDeviceAddr; /* from errata 2005/07 */
159 u8 bmAttributes;
160 struct wusb_dn_hdr dndata[];
4ae1a5bd 161} __packed;
c7f73648
IPG
162
163/* [WUSB] section 8.3.3 */
164enum wa_xfer_type {
165 WA_XFER_TYPE_CTL = 0x80,
166 WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */
167 WA_XFER_TYPE_ISO = 0x82,
168 WA_XFER_RESULT = 0x83,
169 WA_XFER_ABORT = 0x84,
4ae1a5bd
TP
170 WA_XFER_ISO_PACKET_INFO = 0xA0,
171 WA_XFER_ISO_PACKET_STATUS = 0xA1,
c7f73648
IPG
172};
173
174/* [WUSB] section 8.3.3 */
175struct wa_xfer_hdr {
176 u8 bLength; /* 0x18 */
177 u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */
178 __le16 wRPipe; /* RPipe index */
179 __le32 dwTransferID; /* Host-assigned ID */
180 __le32 dwTransferLength; /* Length of data to xfer */
181 u8 bTransferSegment;
4ae1a5bd 182} __packed;
c7f73648
IPG
183
184struct wa_xfer_ctl {
185 struct wa_xfer_hdr hdr;
186 u8 bmAttribute;
187 __le16 wReserved;
188 struct usb_ctrlrequest baSetupData;
4ae1a5bd 189} __packed;
c7f73648
IPG
190
191struct wa_xfer_bi {
192 struct wa_xfer_hdr hdr;
193 u8 bReserved;
194 __le16 wReserved;
4ae1a5bd 195} __packed;
c7f73648 196
4ae1a5bd 197/* [WUSB] section 8.5.5 */
c7f73648
IPG
198struct wa_xfer_hwaiso {
199 struct wa_xfer_hdr hdr;
200 u8 bReserved;
201 __le16 wPresentationTime;
202 __le32 dwNumOfPackets;
4ae1a5bd
TP
203} __packed;
204
205struct wa_xfer_packet_info_hwaiso {
206 __le16 wLength;
207 u8 bPacketType;
208 u8 bReserved;
209 __le16 PacketLength[0];
210} __packed;
211
212struct wa_xfer_packet_status_len_hwaiso {
213 __le16 PacketLength;
214 __le16 PacketStatus;
215} __packed;
216
217struct wa_xfer_packet_status_hwaiso {
218 __le16 wLength;
219 u8 bPacketType;
220 u8 bReserved;
221 struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
222} __packed;
c7f73648
IPG
223
224/* [WUSB] section 8.3.3.5 */
225struct wa_xfer_abort {
226 u8 bLength;
227 u8 bRequestType;
228 __le16 wRPipe; /* RPipe index */
229 __le32 dwTransferID; /* Host-assigned ID */
4ae1a5bd 230} __packed;
c7f73648
IPG
231
232/**
233 * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
234 *
235 */
236struct wa_notif_xfer {
237 struct wa_notif_hdr hdr;
238 u8 bEndpoint;
239 u8 Reserved;
4ae1a5bd 240} __packed;
c7f73648
IPG
241
242/** Transfer result basic codes [WUSB] table 8-15 */
243enum {
244 WA_XFER_STATUS_SUCCESS,
245 WA_XFER_STATUS_HALTED,
246 WA_XFER_STATUS_DATA_BUFFER_ERROR,
247 WA_XFER_STATUS_BABBLE,
248 WA_XFER_RESERVED,
249 WA_XFER_STATUS_NOT_FOUND,
250 WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
251 WA_XFER_STATUS_TRANSACTION_ERROR,
252 WA_XFER_STATUS_ABORTED,
253 WA_XFER_STATUS_RPIPE_NOT_READY,
254 WA_XFER_INVALID_FORMAT,
255 WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
256 WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
257};
258
259/** [WUSB] section 8.3.3.4 */
260struct wa_xfer_result {
261 struct wa_notif_hdr hdr;
262 __le32 dwTransferID;
263 __le32 dwTransferLength;
264 u8 bTransferSegment;
265 u8 bTransferStatus;
266 __le32 dwNumOfPackets;
4ae1a5bd 267} __packed;
c7f73648
IPG
268
269/**
270 * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
271 *
272 * NOTE: u16 fields are read Little Endian from the hardware.
273 *
274 * @bNumPorts is the original max number of devices that the host can
275 * connect; we might chop this so the stack can handle
276 * it. In case you need to access it, use wusbhc->ports_max
277 * if it is a Wireless USB WA.
278 */
279struct usb_wa_descriptor {
280 u8 bLength;
281 u8 bDescriptorType;
1653d2f8 282 __le16 bcdWAVersion;
c7f73648
IPG
283 u8 bNumPorts; /* don't use!! */
284 u8 bmAttributes; /* Reserved == 0 */
1653d2f8
TP
285 __le16 wNumRPipes;
286 __le16 wRPipeMaxBlock;
c7f73648
IPG
287 u8 bRPipeBlockSize;
288 u8 bPwrOn2PwrGood;
289 u8 bNumMMCIEs;
290 u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */
4ae1a5bd 291} __packed;
c7f73648
IPG
292
293/**
294 * HWA Device Information Buffer (WUSB1.0[T8.54])
295 */
296struct hwa_dev_info {
297 u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */
298 u8 bDeviceAddress;
299 __le16 wPHYRates;
300 u8 bmDeviceAttribute;
4ae1a5bd 301} __packed;
c7f73648
IPG
302
303#endif /* #ifndef __LINUX_USB_WUSB_WA_H */
This page took 0.639404 seconds and 5 git commands to generate.