[deliverable/binutils-gdb.git] / include / opcode / ppc.h

/* ppc.h -- Header file for PowerPC opcode table
   Copyright (C) 1994-2015 Free Software Foundation, Inc.
   Written by Ian Lance Taylor, Cygnus Support

   This file is part of GDB, GAS, and the GNU binutils.

   GDB, GAS, and the GNU binutils are free software; you can redistribute
   them and/or modify them under the terms of the GNU General Public
   License as published by the Free Software Foundation; either version 3,
   or (at your option) any later version.

   GDB, GAS, and the GNU binutils are distributed in the hope that they
   will be useful, but WITHOUT ANY WARRANTY; without even the implied
   warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
   the GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this file; see the file COPYING3.  If not, write to the Free
   Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
   MA 02110-1301, USA.  */

#ifndef PPC_H
#define PPC_H

#include "bfd_stdint.h"

typedef uint64_t ppc_cpu_t;

/* The opcode table is an array of struct powerpc_opcode.  */

struct powerpc_opcode
{
  /* The opcode name.  */
  const char *name;

  /* The opcode itself.  Those bits which will be filled in with
     operands are zeroes.  */
  unsigned long opcode;

  /* The opcode mask.  This is used by the disassembler.  This is a
     mask containing ones indicating those bits which must match the
     opcode field, and zeroes indicating those bits which need not
     match (and are presumably filled in by operands).  */
  unsigned long mask;

  /* One bit flags for the opcode.  These are used to indicate which
     specific processors support the instructions.  The defined values
     are listed below.  */
  ppc_cpu_t flags;

  /* One bit flags for the opcode.  These are used to indicate which
     specific processors no longer support the instructions.  The defined
     values are listed below.  */
  ppc_cpu_t deprecated;

  /* An array of operand codes.  Each code is an index into the
     operand table.  They appear in the order which the operands must
     appear in assembly code, and are terminated by a zero.  */
  unsigned char operands[8];
};

/* The table itself is sorted by major opcode number, and is otherwise
   in the order in which the disassembler should consider
   instructions.  */
extern const struct powerpc_opcode powerpc_opcodes[];
extern const int powerpc_num_opcodes;
extern const struct powerpc_opcode vle_opcodes[];
extern const int vle_num_opcodes;

/* Values defined for the flags field of a struct powerpc_opcode.  */

/* Opcode is defined for the PowerPC architecture.  */
#define PPC_OPCODE_PPC			 1

/* Opcode is defined for the POWER (RS/6000) architecture.  */
#define PPC_OPCODE_POWER		 2

/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
#define PPC_OPCODE_POWER2		 4

/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
   but it also supports many additional POWER instructions.  */
#define PPC_OPCODE_601			 8

/* Opcode is supported in both the Power and PowerPC architectures
   (ie, compiler's -mcpu=common or assembler's -mcom).  More than just
   the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER
   and PPC_OPCODE_POWER2 because many instructions changed mnemonics
   between POWER and POWERPC.  */
#define PPC_OPCODE_COMMON	      0x10

/* Opcode is supported for any Power or PowerPC platform (this is
   for the assembler's -many option, and it eliminates duplicates).  */
#define PPC_OPCODE_ANY		      0x20

/* Opcode is only defined on 64 bit architectures.  */
#define PPC_OPCODE_64		      0x40

/* Opcode is supported as part of the 64-bit bridge.  */
#define PPC_OPCODE_64_BRIDGE	      0x80

/* Opcode is supported by Altivec Vector Unit */
#define PPC_OPCODE_ALTIVEC	     0x100

/* Opcode is supported by PowerPC 403 processor.  */
#define PPC_OPCODE_403		     0x200

/* Opcode is supported by PowerPC BookE processor.  */
#define PPC_OPCODE_BOOKE	     0x400

/* Opcode is supported by PowerPC 440 processor.  */
#define PPC_OPCODE_440		     0x800

/* Opcode is only supported by Power4 architecture.  */
#define PPC_OPCODE_POWER4	    0x1000

/* Opcode is only supported by Power7 architecture.  */
#define PPC_OPCODE_POWER7	    0x2000

/* Opcode is only supported by e500x2 Core.  */
#define PPC_OPCODE_SPE		    0x4000

/* Opcode is supported by e500x2 Integer select APU.  */
#define PPC_OPCODE_ISEL		    0x8000

/* Opcode is an e500 SPE floating point instruction.  */
#define PPC_OPCODE_EFS		   0x10000

/* Opcode is supported by branch locking APU.  */
#define PPC_OPCODE_BRLOCK	   0x20000

/* Opcode is supported by performance monitor APU.  */
#define PPC_OPCODE_PMR		   0x40000

/* Opcode is supported by cache locking APU.  */
#define PPC_OPCODE_CACHELCK	   0x80000

/* Opcode is supported by machine check APU.  */
#define PPC_OPCODE_RFMCI	  0x100000

/* Opcode is only supported by Power5 architecture.  */
#define PPC_OPCODE_POWER5	  0x200000

/* Opcode is supported by PowerPC e300 family.  */
#define PPC_OPCODE_E300           0x400000

/* Opcode is only supported by Power6 architecture.  */
#define PPC_OPCODE_POWER6	  0x800000

/* Opcode is only supported by PowerPC Cell family.  */
#define PPC_OPCODE_CELL		 0x1000000

/* Opcode is supported by CPUs with paired singles support.  */
#define PPC_OPCODE_PPCPS	 0x2000000

/* Opcode is supported by Power E500MC */
#define PPC_OPCODE_E500MC        0x4000000

/* Opcode is supported by PowerPC 405 processor.  */
#define PPC_OPCODE_405		 0x8000000

/* Opcode is supported by Vector-Scalar (VSX) Unit */
#define PPC_OPCODE_VSX		0x10000000

/* Opcode is supported by A2.  */
#define PPC_OPCODE_A2	 	0x20000000

/* Opcode is supported by PowerPC 476 processor.  */
#define PPC_OPCODE_476		0x40000000

/* Opcode is supported by AppliedMicro Titan core */
#define PPC_OPCODE_TITAN        0x80000000

/* Opcode which is supported by the e500 family */
#define PPC_OPCODE_E500	       0x100000000ull

/* Opcode is supported by Extended Altivec Vector Unit */
#define PPC_OPCODE_ALTIVEC2    0x200000000ull

/* Opcode is supported by Power E6500 */
#define PPC_OPCODE_E6500       0x400000000ull

/* Opcode is supported by Thread management APU */
#define PPC_OPCODE_TMR         0x800000000ull

/* Opcode which is supported by the VLE extension.  */
#define PPC_OPCODE_VLE	      0x1000000000ull

/* Opcode is only supported by Power8 architecture.  */
#define PPC_OPCODE_POWER8     0x2000000000ull

/* Opcode which is supported by the Hardware Transactional Memory extension.  */
/* Currently, this is the same as the POWER8 mask.  If another cpu comes out
   that isn't a superset of POWER8, we can define this to its own mask.  */
#define PPC_OPCODE_HTM        PPC_OPCODE_POWER8

/* Opcode is supported by ppc750cl.  */
#define PPC_OPCODE_750	      0x4000000000ull

/* Opcode is supported by ppc7450.  */
#define PPC_OPCODE_7450	      0x8000000000ull

/* Opcode is supported by ppc821/850/860.  */
#define PPC_OPCODE_860	      0x10000000000ull

/* A macro to extract the major opcode from an instruction.  */
#define PPC_OP(i) (((i) >> 26) & 0x3f)

/* A macro to determine if the instruction is a 2-byte VLE insn.  */
#define PPC_OP_SE_VLE(m) ((m) <= 0xffff)

/* A macro to extract the major opcode from a VLE instruction.  */
#define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f)

/* A macro to convert a VLE opcode to a VLE opcode segment.  */
#define VLE_OP_TO_SEG(i) ((i) >> 1)
\f
/* The operands table is an array of struct powerpc_operand.  */

struct powerpc_operand
{
  /* A bitmask of bits in the operand.  */
  unsigned int bitm;

  /* The shift operation to be applied to the operand.  No shift
     is made if this is zero.  For positive values, the operand
     is shifted left by SHIFT.  For negative values, the operand
     is shifted right by -SHIFT.  Use PPC_OPSHIFT_INV to indicate
     that BITM and SHIFT cannot be used to determine where the
     operand goes in the insn.  */
  int shift;

  /* Insertion function.  This is used by the assembler.  To insert an
     operand value into an instruction, check this field.

     If it is NULL, execute
	 if (o->shift >= 0)
	   i |= (op & o->bitm) << o->shift;
	 else
	   i |= (op & o->bitm) >> -o->shift;
     (i is the instruction which we are filling in, o is a pointer to
     this structure, and op is the operand value).

     If this field is not NULL, then simply call it with the
     instruction and the operand value.  It will return the new value
     of the instruction.  If the ERRMSG argument is not NULL, then if
     the operand value is illegal, *ERRMSG will be set to a warning
     string (the operand will be inserted in any case).  If the
     operand value is legal, *ERRMSG will be unchanged (most operands
     can accept any value).  */
  unsigned long (*insert)
    (unsigned long instruction, long op, ppc_cpu_t dialect, const char **errmsg);

  /* Extraction function.  This is used by the disassembler.  To
     extract this operand type from an instruction, check this field.

     If it is NULL, compute
	 if (o->shift >= 0)
	   op = (i >> o->shift) & o->bitm;
	 else
	   op = (i << -o->shift) & o->bitm;
	 if ((o->flags & PPC_OPERAND_SIGNED) != 0)
	   sign_extend (op);
     (i is the instruction, o is a pointer to this structure, and op
     is the result).

     If this field is not NULL, then simply call it with the
     instruction value.  It will return the value of the operand.  If
     the INVALID argument is not NULL, *INVALID will be set to
     non-zero if this operand type can not actually be extracted from
     this operand (i.e., the instruction does not match).  If the
     operand is valid, *INVALID will not be changed.  */
  long (*extract) (unsigned long instruction, ppc_cpu_t dialect, int *invalid);

  /* One bit syntax flags.  */
  unsigned long flags;
};

/* Elements in the table are retrieved by indexing with values from
   the operands field of the powerpc_opcodes table.  */

extern const struct powerpc_operand powerpc_operands[];
extern const unsigned int num_powerpc_operands;

/* Use with the shift field of a struct powerpc_operand to indicate
     that BITM and SHIFT cannot be used to determine where the operand
     goes in the insn.  */
#define PPC_OPSHIFT_INV (-1U << 31)

/* Values defined for the flags field of a struct powerpc_operand.  */

/* This operand takes signed values.  */
#define PPC_OPERAND_SIGNED (0x1)

/* This operand takes signed values, but also accepts a full positive
   range of values when running in 32 bit mode.  That is, if bits is
   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
   this flag is ignored.  */
#define PPC_OPERAND_SIGNOPT (0x2)

/* This operand does not actually exist in the assembler input.  This
   is used to support extended mnemonics such as mr, for which two
   operands fields are identical.  The assembler should call the
   insert function with any op value.  The disassembler should call
   the extract function, ignore the return value, and check the value
   placed in the valid argument.  */
#define PPC_OPERAND_FAKE (0x4)

/* The next operand should be wrapped in parentheses rather than
   separated from this one by a comma.  This is used for the load and
   store instructions which want their operands to look like
       reg,displacement(reg)
   */
#define PPC_OPERAND_PARENS (0x8)

/* This operand may use the symbolic names for the CR fields, which
   are
       lt  0	gt  1	eq  2	so  3	un  3
       cr0 0	cr1 1	cr2 2	cr3 3
       cr4 4	cr5 5	cr6 6	cr7 7
   These may be combined arithmetically, as in cr2*4+gt.  These are
   only supported on the PowerPC, not the POWER.  */
#define PPC_OPERAND_CR_BIT (0x10)

/* This operand names a register.  The disassembler uses this to print
   register names with a leading 'r'.  */
#define PPC_OPERAND_GPR (0x20)

/* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0.  */
#define PPC_OPERAND_GPR_0 (0x40)

/* This operand names a floating point register.  The disassembler
   prints these with a leading 'f'.  */
#define PPC_OPERAND_FPR (0x80)

/* This operand is a relative branch displacement.  The disassembler
   prints these symbolically if possible.  */
#define PPC_OPERAND_RELATIVE (0x100)

/* This operand is an absolute branch address.  The disassembler
   prints these symbolically if possible.  */
#define PPC_OPERAND_ABSOLUTE (0x200)

/* This operand is optional, and is zero if omitted.  This is used for
   example, in the optional BF field in the comparison instructions.  The
   assembler must count the number of operands remaining on the line,
   and the number of operands remaining for the opcode, and decide
   whether this operand is present or not.  The disassembler should
   print this operand out only if it is not zero.  */
#define PPC_OPERAND_OPTIONAL (0x400)

/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
   is omitted, then for the next operand use this operand value plus
   1, ignoring the next operand field for the opcode.  This wretched
   hack is needed because the Power rotate instructions can take
   either 4 or 5 operands.  The disassembler should print this operand
   out regardless of the PPC_OPERAND_OPTIONAL field.  */
#define PPC_OPERAND_NEXT (0x800)

/* This operand should be regarded as a negative number for the
   purposes of overflow checking (i.e., the normal most negative
   number is disallowed and one more than the normal most positive
   number is allowed).  This flag will only be set for a signed
   operand.  */
#define PPC_OPERAND_NEGATIVE (0x1000)

/* This operand names a vector unit register.  The disassembler
   prints these with a leading 'v'.  */
#define PPC_OPERAND_VR (0x2000)

/* This operand is for the DS field in a DS form instruction.  */
#define PPC_OPERAND_DS (0x4000)

/* This operand is for the DQ field in a DQ form instruction.  */
#define PPC_OPERAND_DQ (0x8000)

/* Valid range of operand is 0..n rather than 0..n-1.  */
#define PPC_OPERAND_PLUS1 (0x10000)

/* Xilinx APU and FSL related operands */
#define PPC_OPERAND_FSL (0x20000)
#define PPC_OPERAND_FCR (0x40000)
#define PPC_OPERAND_UDI (0x80000)

/* This operand names a vector-scalar unit register.  The disassembler
   prints these with a leading 'vs'.  */
#define PPC_OPERAND_VSR (0x100000)

/* This is a CR FIELD that does not use symbolic names.  */
#define PPC_OPERAND_CR_REG (0x200000)

/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
   is omitted, then the value it should use for the operand is stored
   in the SHIFT field of the immediatly following operand field.  */
#define PPC_OPERAND_OPTIONAL_VALUE (0x400000)
\f
/* The POWER and PowerPC assemblers use a few macros.  We keep them
   with the operands table for simplicity.  The macro table is an
   array of struct powerpc_macro.  */

struct powerpc_macro
{
  /* The macro name.  */
  const char *name;

  /* The number of operands the macro takes.  */
  unsigned int operands;

  /* One bit flags for the opcode.  These are used to indicate which
     specific processors support the instructions.  The values are the
     same as those for the struct powerpc_opcode flags field.  */
  ppc_cpu_t flags;

  /* A format string to turn the macro into a normal instruction.
     Each %N in the string is replaced with operand number N (zero
     based).  */
  const char *format;
};

extern const struct powerpc_macro powerpc_macros[];
extern const int powerpc_num_macros;

extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t *, const char *);

static inline long
ppc_optional_operand_value (const struct powerpc_operand *operand)
{
  if ((operand->flags & PPC_OPERAND_OPTIONAL_VALUE) != 0)
    return (operand+1)->shift;
  return 0;
}

#endif /* PPC_H */
Commit	Line	Data
252b5132	1	/* ppc.h -- Header file for PowerPC opcode table
b90efa5b	2	Copyright (C) 1994-2015 Free Software Foundation, Inc.
252b5132 RH	3	Written by Ian Lance Taylor, Cygnus Support
252b5132 RH	4
e4e42b45 NC	5	This file is part of GDB, GAS, and the GNU binutils.
	6
	7	GDB, GAS, and the GNU binutils are free software; you can redistribute
	8	them and/or modify them under the terms of the GNU General Public
	9	License as published by the Free Software Foundation; either version 3,
	10	or (at your option) any later version.
	11
	12	GDB, GAS, and the GNU binutils are distributed in the hope that they
	13	will be useful, but WITHOUT ANY WARRANTY; without even the implied
	14	warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
	15	the GNU General Public License for more details.
	16
	17	You should have received a copy of the GNU General Public License
	18	along with this file; see the file COPYING3. If not, write to the Free
	19	Software Foundation, 51 Franklin Street - Fifth Floor, Boston,
	20	MA 02110-1301, USA. */
252b5132 RH	21
	22	#ifndef PPC_H
	23	#define PPC_H
	24
b961e85b AM	25	#include "bfd_stdint.h"
	26
	27	typedef uint64_t ppc_cpu_t;
fa452fa6	28
252b5132 RH	29	/* The opcode table is an array of struct powerpc_opcode. */
	30
	31	struct powerpc_opcode
	32	{
	33	/* The opcode name. */
	34	const char *name;
	35
	36	/* The opcode itself. Those bits which will be filled in with
	37	operands are zeroes. */
	38	unsigned long opcode;
	39
	40	/* The opcode mask. This is used by the disassembler. This is a
	41	mask containing ones indicating those bits which must match the
	42	opcode field, and zeroes indicating those bits which need not
	43	match (and are presumably filled in by operands). */
	44	unsigned long mask;
	45
	46	/* One bit flags for the opcode. These are used to indicate which
	47	specific processors support the instructions. The defined values
	48	are listed below. */
fa452fa6	49	ppc_cpu_t flags;
252b5132	50
1cb0a767 PB	51	/* One bit flags for the opcode. These are used to indicate which
	52	specific processors no longer support the instructions. The defined
	53	values are listed below. */
	54	ppc_cpu_t deprecated;
	55
252b5132 RH	56	/* An array of operand codes. Each code is an index into the
	57	operand table. They appear in the order which the operands must
	58	appear in assembly code, and are terminated by a zero. */
	59	unsigned char operands[8];
	60	};
	61
	62	/* The table itself is sorted by major opcode number, and is otherwise
	63	in the order in which the disassembler should consider
	64	instructions. */
	65	extern const struct powerpc_opcode powerpc_opcodes[];
	66	extern const int powerpc_num_opcodes;
b9c361e0 JL	67	extern const struct powerpc_opcode vle_opcodes[];
b9c361e0 JL	68	extern const int vle_num_opcodes;
252b5132 RH	69
	70	/* Values defined for the flags field of a struct powerpc_opcode. */
	71
	72	/* Opcode is defined for the PowerPC architecture. */
68d23d21	73	#define PPC_OPCODE_PPC 1
252b5132 RH	74
252b5132 RH	75	/* Opcode is defined for the POWER (RS/6000) architecture. */
68d23d21	76	#define PPC_OPCODE_POWER 2
252b5132 RH	77
252b5132 RH	78	/* Opcode is defined for the POWER2 (Rios 2) architecture. */
68d23d21	79	#define PPC_OPCODE_POWER2 4
252b5132	80
252b5132 RH	81	/* Opcode is supported by the Motorola PowerPC 601 processor. The 601
	82	is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
	83	but it also supports many additional POWER instructions. */
bdc70b4a	84	#define PPC_OPCODE_601 8
252b5132 RH	85
252b5132 RH	86	/* Opcode is supported in both the Power and PowerPC architectures
f2bae120 AM	87	(ie, compiler's -mcpu=common or assembler's -mcom). More than just
	88	the intersection of PPC_OPCODE_PPC with the union of PPC_OPCODE_POWER
	89	and PPC_OPCODE_POWER2 because many instructions changed mnemonics
	90	between POWER and POWERPC. */
bdc70b4a	91	#define PPC_OPCODE_COMMON 0x10
252b5132 RH	92
	93	/* Opcode is supported for any Power or PowerPC platform (this is
	94	for the assembler's -many option, and it eliminates duplicates). */
bdc70b4a AM	95	#define PPC_OPCODE_ANY 0x20
	96
	97	/* Opcode is only defined on 64 bit architectures. */
	98	#define PPC_OPCODE_64 0x40
252b5132	99
45c18104	100	/* Opcode is supported as part of the 64-bit bridge. */
bdc70b4a	101	#define PPC_OPCODE_64_BRIDGE 0x80
45c18104	102
966f959b	103	/* Opcode is supported by Altivec Vector Unit */
bdc70b4a	104	#define PPC_OPCODE_ALTIVEC 0x100
418c1742 MG	105
418c1742 MG	106	/* Opcode is supported by PowerPC 403 processor. */
bdc70b4a	107	#define PPC_OPCODE_403 0x200
418c1742	108
a09cf9bd	109	/* Opcode is supported by PowerPC BookE processor. */
bdc70b4a	110	#define PPC_OPCODE_BOOKE 0x400
68d23d21 AM	111
68d23d21 AM	112	/* Opcode is supported by PowerPC 440 processor. */
bdc70b4a	113	#define PPC_OPCODE_440 0x800
966f959b	114
fc1e7121	115	/* Opcode is only supported by Power4 architecture. */
bdc70b4a	116	#define PPC_OPCODE_POWER4 0x1000
fc1e7121	117
066be9f7	118	/* Opcode is only supported by Power7 architecture. */
bdc70b4a	119	#define PPC_OPCODE_POWER7 0x2000
0449635d EZ	120
0449635d EZ	121	/* Opcode is only supported by e500x2 Core. */
bdc70b4a	122	#define PPC_OPCODE_SPE 0x4000
0449635d EZ	123
0449635d EZ	124	/* Opcode is supported by e500x2 Integer select APU. */
bdc70b4a	125	#define PPC_OPCODE_ISEL 0x8000
0449635d EZ	126
0449635d EZ	127	/* Opcode is an e500 SPE floating point instruction. */
bdc70b4a	128	#define PPC_OPCODE_EFS 0x10000
0449635d EZ	129
0449635d EZ	130	/* Opcode is supported by branch locking APU. */
bdc70b4a	131	#define PPC_OPCODE_BRLOCK 0x20000
0449635d EZ	132
0449635d EZ	133	/* Opcode is supported by performance monitor APU. */
bdc70b4a	134	#define PPC_OPCODE_PMR 0x40000
0449635d EZ	135
0449635d EZ	136	/* Opcode is supported by cache locking APU. */
bdc70b4a	137	#define PPC_OPCODE_CACHELCK 0x80000
0449635d EZ	138
0449635d EZ	139	/* Opcode is supported by machine check APU. */
bdc70b4a	140	#define PPC_OPCODE_RFMCI 0x100000
0449635d	141
f4411256	142	/* Opcode is only supported by Power5 architecture. */
bdc70b4a	143	#define PPC_OPCODE_POWER5 0x200000
f4411256	144
36ae0db3	145	/* Opcode is supported by PowerPC e300 family. */
bdc70b4a	146	#define PPC_OPCODE_E300 0x400000
9622b051 AM	147
9622b051 AM	148	/* Opcode is only supported by Power6 architecture. */
bdc70b4a	149	#define PPC_OPCODE_POWER6 0x800000
9622b051	150
ede602d7	151	/* Opcode is only supported by PowerPC Cell family. */
bdc70b4a	152	#define PPC_OPCODE_CELL 0x1000000
36ae0db3	153
c3d65c1c	154	/* Opcode is supported by CPUs with paired singles support. */
bdc70b4a	155	#define PPC_OPCODE_PPCPS 0x2000000
c3d65c1c	156
19a6653c	157	/* Opcode is supported by Power E500MC */
bdc70b4a	158	#define PPC_OPCODE_E500MC 0x4000000
19a6653c	159
081ba1b3	160	/* Opcode is supported by PowerPC 405 processor. */
bdc70b4a	161	#define PPC_OPCODE_405 0x8000000
081ba1b3	162
9b4e5766	163	/* Opcode is supported by Vector-Scalar (VSX) Unit */
bdc70b4a	164	#define PPC_OPCODE_VSX 0x10000000
9b4e5766	165
e0d602ec	166	/* Opcode is supported by A2. */
bdc70b4a	167	#define PPC_OPCODE_A2 0x20000000
e0d602ec	168
9fe54b1c	169	/* Opcode is supported by PowerPC 476 processor. */
bdc70b4a	170	#define PPC_OPCODE_476 0x40000000
9fe54b1c	171
ce3d2015	172	/* Opcode is supported by AppliedMicro Titan core */
bdc70b4a	173	#define PPC_OPCODE_TITAN 0x80000000
ce3d2015	174
e01d869a	175	/* Opcode which is supported by the e500 family */
bdc70b4a	176	#define PPC_OPCODE_E500 0x100000000ull
e01d869a	177
aea77599 AM	178	/* Opcode is supported by Extended Altivec Vector Unit */
	179	#define PPC_OPCODE_ALTIVEC2 0x200000000ull
	180
	181	/* Opcode is supported by Power E6500 */
	182	#define PPC_OPCODE_E6500 0x400000000ull
	183
	184	/* Opcode is supported by Thread management APU */
	185	#define PPC_OPCODE_TMR 0x800000000ull
	186
b9c361e0 JL	187	/* Opcode which is supported by the VLE extension. */
	188	#define PPC_OPCODE_VLE 0x1000000000ull
	189
5817ffd1 PB	190	/* Opcode is only supported by Power8 architecture. */
	191	#define PPC_OPCODE_POWER8 0x2000000000ull
	192
	193	/* Opcode which is supported by the Hardware Transactional Memory extension. */
	194	/* Currently, this is the same as the POWER8 mask. If another cpu comes out
	195	that isn't a superset of POWER8, we can define this to its own mask. */
	196	#define PPC_OPCODE_HTM PPC_OPCODE_POWER8
	197
ef5a96d5 AM	198	/* Opcode is supported by ppc750cl. */
	199	#define PPC_OPCODE_750 0x4000000000ull
	200
	201	/* Opcode is supported by ppc7450. */
	202	#define PPC_OPCODE_7450 0x8000000000ull
	203
	204	/* Opcode is supported by ppc821/850/860. */
	205	#define PPC_OPCODE_860 0x10000000000ull
	206
252b5132 RH	207	/* A macro to extract the major opcode from an instruction. */
252b5132 RH	208	#define PPC_OP(i) (((i) >> 26) & 0x3f)
b9c361e0 JL	209
	210	/* A macro to determine if the instruction is a 2-byte VLE insn. */
	211	#define PPC_OP_SE_VLE(m) ((m) <= 0xffff)
	212
	213	/* A macro to extract the major opcode from a VLE instruction. */
	214	#define VLE_OP(i,m) (((i) >> ((m) <= 0xffff ? 10 : 26)) & 0x3f)
	215
	216	/* A macro to convert a VLE opcode to a VLE opcode segment. */
	217	#define VLE_OP_TO_SEG(i) ((i) >> 1)
252b5132 RH	218	\f
	219	/* The operands table is an array of struct powerpc_operand. */
	220
	221	struct powerpc_operand
	222	{
b84bf58a AM	223	/* A bitmask of bits in the operand. */
b84bf58a AM	224	unsigned int bitm;
252b5132	225
b9c361e0 JL	226	/* The shift operation to be applied to the operand. No shift
	227	is made if this is zero. For positive values, the operand
	228	is shifted left by SHIFT. For negative values, the operand
	229	is shifted right by -SHIFT. Use PPC_OPSHIFT_INV to indicate
	230	that BITM and SHIFT cannot be used to determine where the
	231	operand goes in the insn. */
252b5132 RH	232	int shift;
	233
	234	/* Insertion function. This is used by the assembler. To insert an
	235	operand value into an instruction, check this field.
	236
	237	If it is NULL, execute
b9c361e0 JL	238	if (o->shift >= 0)
	239	i \|= (op & o->bitm) << o->shift;
	240	else
	241	i \|= (op & o->bitm) >> -o->shift;
252b5132	242	(i is the instruction which we are filling in, o is a pointer to
b84bf58a	243	this structure, and op is the operand value).
252b5132 RH	244
	245	If this field is not NULL, then simply call it with the
	246	instruction and the operand value. It will return the new value
	247	of the instruction. If the ERRMSG argument is not NULL, then if
	248	the operand value is illegal, *ERRMSG will be set to a warning
	249	string (the operand will be inserted in any case). If the
	250	operand value is legal, *ERRMSG will be unchanged (most operands
	251	can accept any value). */
8cf3f354	252	unsigned long (*insert)
fa452fa6	253	(unsigned long instruction, long op, ppc_cpu_t dialect, const char **errmsg);
252b5132 RH	254
	255	/* Extraction function. This is used by the disassembler. To
	256	extract this operand type from an instruction, check this field.
	257
	258	If it is NULL, compute
b9c361e0 JL	259	if (o->shift >= 0)
	260	op = (i >> o->shift) & o->bitm;
	261	else
	262	op = (i << -o->shift) & o->bitm;
b84bf58a AM	263	if ((o->flags & PPC_OPERAND_SIGNED) != 0)
b84bf58a AM	264	sign_extend (op);
252b5132	265	(i is the instruction, o is a pointer to this structure, and op
b84bf58a	266	is the result).
252b5132 RH	267
	268	If this field is not NULL, then simply call it with the
	269	instruction value. It will return the value of the operand. If
	270	the INVALID argument is not NULL, *INVALID will be set to
	271	non-zero if this operand type can not actually be extracted from
	272	this operand (i.e., the instruction does not match). If the
	273	operand is valid, INVALID will not be changed. /
fa452fa6	274	long (extract) (unsigned long instruction, ppc_cpu_t dialect, int invalid);
252b5132 RH	275
	276	/* One bit syntax flags. */
	277	unsigned long flags;
	278	};
	279
	280	/* Elements in the table are retrieved by indexing with values from
	281	the operands field of the powerpc_opcodes table. */
	282
	283	extern const struct powerpc_operand powerpc_operands[];
b84bf58a	284	extern const unsigned int num_powerpc_operands;
252b5132	285
b9c361e0 JL	286	/* Use with the shift field of a struct powerpc_operand to indicate
	287	that BITM and SHIFT cannot be used to determine where the operand
	288	goes in the insn. */
b6518b38	289	#define PPC_OPSHIFT_INV (-1U << 31)
b9c361e0	290
252b5132 RH	291	/* Values defined for the flags field of a struct powerpc_operand. */
	292
	293	/* This operand takes signed values. */
b84bf58a	294	#define PPC_OPERAND_SIGNED (0x1)
252b5132 RH	295
	296	/* This operand takes signed values, but also accepts a full positive
	297	range of values when running in 32 bit mode. That is, if bits is
	298	16, it takes any value from -0x8000 to 0xffff. In 64 bit mode,
	299	this flag is ignored. */
b84bf58a	300	#define PPC_OPERAND_SIGNOPT (0x2)
252b5132 RH	301
	302	/* This operand does not actually exist in the assembler input. This
	303	is used to support extended mnemonics such as mr, for which two
	304	operands fields are identical. The assembler should call the
	305	insert function with any op value. The disassembler should call
	306	the extract function, ignore the return value, and check the value
	307	placed in the valid argument. */
b84bf58a	308	#define PPC_OPERAND_FAKE (0x4)
252b5132 RH	309
	310	/* The next operand should be wrapped in parentheses rather than
	311	separated from this one by a comma. This is used for the load and
	312	store instructions which want their operands to look like
	313	reg,displacement(reg)
	314	*/
b84bf58a	315	#define PPC_OPERAND_PARENS (0x8)
252b5132 RH	316
	317	/* This operand may use the symbolic names for the CR fields, which
	318	are
	319	lt 0 gt 1 eq 2 so 3 un 3
	320	cr0 0 cr1 1 cr2 2 cr3 3
	321	cr4 4 cr5 5 cr6 6 cr7 7
	322	These may be combined arithmetically, as in cr2*4+gt. These are
	323	only supported on the PowerPC, not the POWER. */
b9c361e0	324	#define PPC_OPERAND_CR_BIT (0x10)
252b5132 RH	325
	326	/* This operand names a register. The disassembler uses this to print
	327	register names with a leading 'r'. */
b84bf58a	328	#define PPC_OPERAND_GPR (0x20)
252b5132	329
fdd12ef3	330	/* Like PPC_OPERAND_GPR, but don't print a leading 'r' for r0. */
b84bf58a	331	#define PPC_OPERAND_GPR_0 (0x40)
fdd12ef3	332
252b5132 RH	333	/* This operand names a floating point register. The disassembler
252b5132 RH	334	prints these with a leading 'f'. */
b84bf58a	335	#define PPC_OPERAND_FPR (0x80)
252b5132 RH	336
	337	/* This operand is a relative branch displacement. The disassembler
	338	prints these symbolically if possible. */
b84bf58a	339	#define PPC_OPERAND_RELATIVE (0x100)
252b5132 RH	340
	341	/* This operand is an absolute branch address. The disassembler
	342	prints these symbolically if possible. */
b84bf58a	343	#define PPC_OPERAND_ABSOLUTE (0x200)
252b5132 RH	344
252b5132 RH	345	/* This operand is optional, and is zero if omitted. This is used for
2a309db0	346	example, in the optional BF field in the comparison instructions. The
252b5132 RH	347	assembler must count the number of operands remaining on the line,
	348	and the number of operands remaining for the opcode, and decide
	349	whether this operand is present or not. The disassembler should
	350	print this operand out only if it is not zero. */
b84bf58a	351	#define PPC_OPERAND_OPTIONAL (0x400)
252b5132 RH	352
	353	/* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand
	354	is omitted, then for the next operand use this operand value plus
	355	1, ignoring the next operand field for the opcode. This wretched
	356	hack is needed because the Power rotate instructions can take
	357	either 4 or 5 operands. The disassembler should print this operand
	358	out regardless of the PPC_OPERAND_OPTIONAL field. */
b84bf58a	359	#define PPC_OPERAND_NEXT (0x800)
252b5132 RH	360
	361	/* This operand should be regarded as a negative number for the
	362	purposes of overflow checking (i.e., the normal most negative
	363	number is disallowed and one more than the normal most positive
	364	number is allowed). This flag will only be set for a signed
	365	operand. */
b84bf58a	366	#define PPC_OPERAND_NEGATIVE (0x1000)
966f959b C	367
	368	/* This operand names a vector unit register. The disassembler
	369	prints these with a leading 'v'. */
b84bf58a	370	#define PPC_OPERAND_VR (0x2000)
966f959b	371
a6959011	372	/* This operand is for the DS field in a DS form instruction. */
b84bf58a	373	#define PPC_OPERAND_DS (0x4000)
adadcc0c AM	374
adadcc0c AM	375	/* This operand is for the DQ field in a DQ form instruction. */
b84bf58a AM	376	#define PPC_OPERAND_DQ (0x8000)
b84bf58a AM	377
3896c469	378	/* Valid range of operand is 0..n rather than 0..n-1. */
b84bf58a	379	#define PPC_OPERAND_PLUS1 (0x10000)
081ba1b3 AM	380
	381	/* Xilinx APU and FSL related operands */
	382	#define PPC_OPERAND_FSL (0x20000)
	383	#define PPC_OPERAND_FCR (0x40000)
	384	#define PPC_OPERAND_UDI (0x80000)
9b4e5766 PB	385
	386	/* This operand names a vector-scalar unit register. The disassembler
	387	prints these with a leading 'vs'. */
	388	#define PPC_OPERAND_VSR (0x100000)
b9c361e0 JL	389
	390	/* This is a CR FIELD that does not use symbolic names. */
	391	#define PPC_OPERAND_CR_REG (0x200000)
11a0cf2e PB	392
	393	/* This flag is only used with PPC_OPERAND_OPTIONAL. If this operand
	394	is omitted, then the value it should use for the operand is stored
	395	in the SHIFT field of the immediatly following operand field. */
	396	#define PPC_OPERAND_OPTIONAL_VALUE (0x400000)
252b5132 RH	397	\f
	398	/* The POWER and PowerPC assemblers use a few macros. We keep them
	399	with the operands table for simplicity. The macro table is an
	400	array of struct powerpc_macro. */
	401
	402	struct powerpc_macro
	403	{
	404	/* The macro name. */
	405	const char *name;
	406
	407	/* The number of operands the macro takes. */
	408	unsigned int operands;
	409
	410	/* One bit flags for the opcode. These are used to indicate which
	411	specific processors support the instructions. The values are the
	412	same as those for the struct powerpc_opcode flags field. */
fa452fa6	413	ppc_cpu_t flags;
252b5132 RH	414
	415	/* A format string to turn the macro into a normal instruction.
	416	Each %N in the string is replaced with operand number N (zero
	417	based). */
	418	const char *format;
	419	};
	420
	421	extern const struct powerpc_macro powerpc_macros[];
	422	extern const int powerpc_num_macros;
	423
776fc418	424	extern ppc_cpu_t ppc_parse_cpu (ppc_cpu_t, ppc_cpu_t , const char );
69fe9ce5	425
11a0cf2e PB	426	static inline long
	427	ppc_optional_operand_value (const struct powerpc_operand *operand)
	428	{
	429	if ((operand->flags & PPC_OPERAND_OPTIONAL_VALUE) != 0)
	430	return (operand+1)->shift;
	431	return 0;
	432	}
	433
252b5132	434	#endif /* PPC_H */