[deliverable/binutils-gdb.git] / ld / scripttempl / elfm68hc11.sc

#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to 0)
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	EMBEDDED - whether this is for an embedded system. 
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#
test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test "$LD_FLAG" = "N" && DATA_ADDR=.

CTOR=".ctors ${CONSTRUCTING-0} : 
  {
    ${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
    ${CONSTRUCTING+${CTOR_START}}
    *(.ctors)
    /* We don't want to include the .ctor section from
       from the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last

    KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors)) */

    ${CONSTRUCTING+${CTOR_END}}
    ${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
  } ${RELOCATING+ > ${TEXT_MEMORY}}"

DTOR="  .dtors	${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
    *(.dtors)
    /*
    KEEP (*crtbegin.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors)) */
    ${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
  } ${RELOCATING+ > ${TEXT_MEMORY}}"


VECTORS="
  /* If the 'vectors_addr' symbol is defined, it indicates the start address
     of interrupt vectors.  This depends on the 68HC11 operating mode:

			Addr
     Single chip	0xffc0
     Extended mode	0xffc0
     Bootstrap		0x00c0
     Test		0xbfc0

     In general, the vectors address is 0xffc0.  This can be overriden 
     with the '-defsym vectors_addr=0xbfc0' ld option.

     Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
     they are redirected to 0x00c0 by the internal PROM.  Application's vectors
     must also consist of jump instructions (see Motorola's manual).  */

  PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
  .vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
  {
    *(.vectors)
  }"

#
# We provide two emulations: a fixed on that defines some memory banks
# and a configurable one that includes a user provided memory definition.
#
case $GENERIC_BOARD in
  yes|1|YES)
	MEMORY_DEF="
/* Get memory banks definition from some user configuration file.
   This file must be located in some linker directory (search path
   with -L<dir>). See fixed memory banks emulation script.  */
INCLUDE memory.x;
"
	;;
  *)
MEMORY_DEF="
/* Fixed definition of the available memory banks.
   See generic emulation script for a user defined configuration.  */
MEMORY
{
  page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
  text  (rx)  : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
  data        : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
  eeprom      : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
}

/* Setup the stack on the top of the data memory bank.  */
PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
"
	;;
esac

STARTUP_CODE="
    /* Startup code.  */
    *(.install0)	/* Section should setup the stack pointer.  */
    *(.install1)	/* Place holder for applications.  */
    *(.install2)	/* Optional installation of data sections in RAM.  */
    *(.install3)	/* Place holder for applications.  */
    *(.install4)	/* Section that calls the main.  */
"

FINISH_CODE="
    /* Finish code.  */
    *(.fini0)		/* Beginning of finish code (_exit symbol).  */
    *(.fini1)		/* Place holder for applications.  */
    *(.fini2)		/* C++ destructors.  */
    *(.fini3)		/* Place holder for applications.  */
    *(.fini4)		/* Runtime exit.  */
"

PRE_COMPUTE_DATA_SIZE="
/* SCz: this does not work yet... This is supposed to force the loading
   of _map_data.o (from libgcc.a) when the .data section is not empty.
   By doing so, this should bring the code that copies the .data section
   from ROM to RAM at init time.

  ___pre_comp_data_size = SIZEOF(.data);
  __install_data_sections = ___pre_comp_data_size > 0 ?
		__map_data_sections : 0;
*/
"

INSTALL_RELOC="
  .install0 0 : { *(.install0) }
  .install1 0 : { *(.install1) }
  .install2 0 : { *(.install2) }
  .install3 0 : { *(.install3) }
  .install4 0 : { *(.install4) }
"

FINISH_RELOC="
  .fini0 0 : { *(.fini0) }
  .fini1 0 : { *(.fini1) }
  .fini2 0 : { *(.fini2) }
  .fini3 0 : { *(.fini3) }
  .fini4 0 : { *(.fini4) }
"

BSS_DATA_RELOC="
  .data1 0 : { *(.data1) }

  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata   0 : { *(.sdata) }
  .sbss    0 : { *(.sbss) }
  .scommon 0 : { *(.scommon) }
"

SOFT_REGS_RELOC="
  .softregs 0 : { *(.softregs) }
"

cat <<EOF
${RELOCATING+/* Linker script for 68HC11 executable (PROM).  */}
${RELOCATING-/* Linker script for 68HC11 object file (ld -r).  */}

OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
ENTRY(${ENTRY})

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${MEMORY_DEF}}

SECTIONS
{
  .hash        ${RELOCATING-0} : { *(.hash)		}
  .dynsym      ${RELOCATING-0} : { *(.dynsym)		}
  .dynstr      ${RELOCATING-0} : { *(.dynstr)		}
  .gnu.version		${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d	${RELOCATING-0} : { *(.gnu.version_d) }
  .gnu.version_r	${RELOCATING-0} : { *(.gnu.version_r) }

  .rel.text    ${RELOCATING-0} :
    {
      *(.rel.text)
      ${RELOCATING+*(.rel.text.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.t.*)}
    }
  .rela.text   ${RELOCATING-0} :
    {
      *(.rela.text)
      ${RELOCATING+*(.rela.text.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.t.*)}
    }
  .rel.data    ${RELOCATING-0} :
    {
      *(.rel.data)
      ${RELOCATING+*(.rel.data.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.d.*)}
    }
  .rela.data   ${RELOCATING-0} :
    {
      *(.rela.data)
      ${RELOCATING+*(.rela.data.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.d.*)}
    }
  .rel.rodata  ${RELOCATING-0} :
    {
      *(.rel.rodata)
      ${RELOCATING+*(.rel.rodata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.r.*)}
    }
  .rela.rodata ${RELOCATING-0} :
    {
      *(.rela.rodata)
      ${RELOCATING+*(.rela.rodata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.r.*)}
    }
  .rel.sdata   ${RELOCATING-0} :
    {
      *(.rel.sdata)
      ${RELOCATING+*(.rel.sdata.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.s.*)}
    }
  .rela.sdata   ${RELOCATING-0} :
    {
      *(.rela.sdata)
      ${RELOCATING+*(.rela.sdata.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.s.*)}
    }
  .rel.sbss    ${RELOCATING-0} :
    { 
      *(.rel.sbss)
      ${RELOCATING+*(.rel.sbss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    }
  .rela.sbss   ${RELOCATING-0} :
    {
      *(.rela.sbss)
      ${RELOCATING+*(.rela.sbss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.sb.*)}
    }
  .rel.bss     ${RELOCATING-0} : 
    { 
      *(.rel.bss)
      ${RELOCATING+*(.rel.bss.*)}
      ${RELOCATING+*(.rel.gnu.linkonce.b.*)}
    }
  .rela.bss    ${RELOCATING-0} : 
    { 
      *(.rela.bss)
      ${RELOCATING+*(.rela.bss.*)}
      ${RELOCATING+*(.rela.gnu.linkonce.b.*)}
    }
  .rela.stext		${RELOCATING-0} : { *(.rela.stest) }
  .rela.etext		${RELOCATING-0} : { *(.rela.etest) }
  .rela.sdata		${RELOCATING-0} : { *(.rela.sdata) }
  .rela.edata		${RELOCATING-0} : { *(.rela.edata) }
  .rela.eit_v		${RELOCATING-0} : { *(.rela.eit_v) }
  .rela.ebss		${RELOCATING-0} : { *(.rela.ebss) }
  .rela.srodata		${RELOCATING-0} : { *(.rela.srodata) }
  .rela.erodata		${RELOCATING-0} : { *(.rela.erodata) }
  .rela.got		${RELOCATING-0} : { *(.rela.got) }
  .rela.ctors		${RELOCATING-0} : { *(.rela.ctors) }
  .rela.dtors		${RELOCATING-0} : { *(.rela.dtors) }
  .rela.init		${RELOCATING-0} : { *(.rela.init) }
  .rela.fini		${RELOCATING-0} : { *(.rela.fini) }
  .rela.plt		${RELOCATING-0} : { *(.rela.plt) }

  .rel.stext		${RELOCATING-0} : { *(.rel.stest) }
  .rel.etext		${RELOCATING-0} : { *(.rel.etest) }
  .rel.sdata		${RELOCATING-0} : { *(.rel.sdata) }
  .rel.edata		${RELOCATING-0} : { *(.rel.edata) }
  .rel.ebss		${RELOCATING-0} : { *(.rel.ebss) }
  .rel.eit_v		${RELOCATING-0} : { *(.rel.eit_v) }
  .rel.srodata		${RELOCATING-0} : { *(.rel.srodata) }
  .rel.erodata		${RELOCATING-0} : { *(.rel.erodata) }
  .rel.got		${RELOCATING-0} : { *(.rel.got) }
  .rel.ctors		${RELOCATING-0} : { *(.rel.ctors) }
  .rel.dtors		${RELOCATING-0} : { *(.rel.dtors) }
  .rel.init		${RELOCATING-0} : { *(.rel.init) }
  .rel.fini		${RELOCATING-0} : { *(.rel.fini) }
  .rel.plt		${RELOCATING-0} : { *(.rel.plt) }

  /* Concatenate .page0 sections.  Put them in the page0 memory bank
     unless we are creating a relocatable file.  */
  .page0 :
  {
    *(.page0)
    ${RELOCATING+*(.softregs)}
  } ${RELOCATING+ > page0}

  /* Start of text section.  */
  .stext ${RELOCATING-0} : 
  {
    *(.stext)
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .init	${RELOCATING-0} :
  {
    *(.init) 
  } ${RELOCATING+=${NOP-0}}

  ${RELOCATING-${INSTALL_RELOC}}
  ${RELOCATING-${FINISH_RELOC}}

  .text ${RELOCATING-0}:
  {
    /* Put startup code at beginning so that _start keeps same address.  */
    ${RELOCATING+${STARTUP_CODE}}

    ${RELOCATING+*(.init)}
    *(.text)
    ${RELOCATING+*(.text.*)}
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    ${RELOCATING+*(.gnu.linkonce.t.*)}

    ${RELOCATING+${FINISH_CODE}}

    ${RELOCATING+_etext = .;}
    ${RELOCATING+PROVIDE (etext = .);}

  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .eh_frame ${RELOCATING-0} :
  {
    KEEP (*(.eh_frame))
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .rodata  ${RELOCATING-0} :
  {
    *(.rodata)
    ${RELOCATING+*(.rodata.*)}
    ${RELOCATING+*(.gnu.linkonce.r*)}
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  .rodata1 ${RELOCATING-0} :
  {
    *(.rodata1)
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  /* Constructor and destructor tables are in ROM.  */
  ${RELOCATING+${CTOR}}
  ${RELOCATING+${DTOR}}

  .jcr ${RELOCATING-0} :
  {
    KEEP (*(.jcr))
  } ${RELOCATING+ > ${TEXT_MEMORY}}

  /* Start of the data section image in ROM.  */
  ${RELOCATING+__data_image = .;}
  ${RELOCATING+PROVIDE (__data_image = .);}

  /* All read-only sections that normally go in PROM must be above.
     We construct the DATA image section in PROM at end of all these
     read-only sections.  The data image must be copied at init time.
     Refer to GNU ld, Section 3.6.8.2 Output Section LMA.  */
  .data  ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
  {
    ${RELOCATING+__data_section_start = .;}
    ${RELOCATING+PROVIDE (__data_section_start = .);}

    ${RELOCATING+${DATA_START_SYMBOLS}}
    ${RELOCATING+*(.sdata)}
    *(.data)
    ${RELOCATING+*(.data.*)}
    ${RELOCATING+*(.data1)}
    ${RELOCATING+*(.gnu.linkonce.d.*)}
    ${CONSTRUCTING+CONSTRUCTORS}

    ${RELOCATING+_edata  =  .;}
    ${RELOCATING+PROVIDE (edata = .);}
  } ${RELOCATING+ > ${DATA_MEMORY}}

  ${RELOCATING+__data_section_size = SIZEOF(.data);}
  ${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
  ${RELOCATING+__data_image_end = __data_image + __data_section_size;}

  ${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}

  /* .install ${RELOCATING-0}:
  {
    . = _data_image_end;
  } ${RELOCATING+ > ${TEXT_MEMORY}} */

  /* Relocation for some bss and data sections.  */
  ${RELOCATING-${BSS_DATA_RELOC}}
  ${RELOCATING-${SOFT_REGS_RELOC}}

  .bss ${RELOCATING-0} :
  {
    ${RELOCATING+__bss_start = .;}
    ${RELOCATING+*(.sbss)}
    ${RELOCATING+*(.scommon)}

    *(.dynbss)
    *(.bss)
    ${RELOCATING+*(.bss.*)}
    ${RELOCATING+*(.gnu.linkonce.b.*)}
    *(COMMON)
    ${RELOCATING+PROVIDE (_end = .);}
  } ${RELOCATING+ > ${DATA_MEMORY}}
  ${RELOCATING+__bss_size = SIZEOF(.bss);}
  ${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}

  .eeprom ${RELOCATING-0} :
  {
    *(.eeprom)
    *(.eeprom.*)
  } ${RELOCATING+ > ${EEPROM_MEMORY}}

  ${RELOCATING+${VECTORS}}

  /* Stabs debugging sections.  */
  .stab		 0 : { *(.stab) }
  .stabstr	 0 : { *(.stabstr) }
  .stab.excl	 0 : { *(.stab.excl) }
  .stab.exclstr	 0 : { *(.stab.exclstr) }
  .stab.index	 0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment	 0 : { *(.comment) }

  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.
     Treatment of DWARF debug section must be at end of the linker
     script to avoid problems when there are undefined symbols. It's necessary
     to avoid that the DWARF section is relocated before such undefined
     symbols are found.  */

  /* DWARF 1 */
  .debug	 0 : { *(.debug) }
  .line		 0 : { *(.line) }

  /* GNU DWARF 1 extensions */
  .debug_srcinfo 0 : { *(.debug_srcinfo) }
  .debug_sfnames 0 : { *(.debug_sfnames) }

  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }

  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
}
EOF
Commit	Line	Data
60bcf0fa NC	1	#
60bcf0fa NC	2	# Unusual variables checked by this code:
563e308f	3	# NOP - four byte opcode for no-op (defaults to 0)
60bcf0fa NC	4	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	5	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	6	# (e.g., .PARISC.global)
	7	# OTHER_SECTIONS - at the end
	8	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	9	# executable (e.g., _DYNAMIC_LINK)
	10	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	11	# .text section.
	12	# DATA_START_SYMBOLS - symbols that appear at the start of the
	13	# .data section.
	14	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	15	# .bss section besides __bss_start.
	16	# EMBEDDED - whether this is for an embedded system.
	17	#
	18	# When adding sections, do note that the names of some sections are used
	19	# when specifying the start address of the next.
	20	#
	21	test -z "$ENTRY" && ENTRY=_start
	22	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	23	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
	24	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
	25	test "$LD_FLAG" = "N" && DATA_ADDR=.
	26
	27	CTOR=".ctors ${CONSTRUCTING-0} :
	28	{
de0b1853	29	${CONSTRUCTING+ PROVIDE (__CTOR_LIST__ = .); }
60bcf0fa NC	30	${CONSTRUCTING+${CTOR_START}}
	31	*(.ctors)
	32	/* We don't want to include the .ctor section from
	33	from the crtend.o file until after the sorted ctors.
	34	The .ctor section from the crtend file contains the
	35	end of ctors marker and it must be last
	36
	37	KEEP ((EXCLUDE_FILE (crtend.o) .ctors))
	38	KEEP ((SORT(.ctors.)))
	39	KEEP ((.ctors)) /
	40
	41	${CONSTRUCTING+${CTOR_END}}
de0b1853	42	${CONSTRUCTING+ PROVIDE(__CTOR_END__ = .); }
ecfdd20c	43	} ${RELOCATING+ > ${TEXT_MEMORY}}"
60bcf0fa NC	44
	45	DTOR=" .dtors ${CONSTRUCTING-0} :
	46	{
de0b1853	47	${CONSTRUCTING+ PROVIDE(__DTOR_LIST__ = .); }
60bcf0fa NC	48	*(.dtors)
	49	/*
	50	KEEP (*crtbegin.o(.dtors))
	51	KEEP ((EXCLUDE_FILE (crtend.o) .dtors))
	52	KEEP ((SORT(.dtors.)))
	53	KEEP ((.dtors)) /
de0b1853	54	${CONSTRUCTING+ PROVIDE(__DTOR_END__ = .); }
ecfdd20c	55	} ${RELOCATING+ > ${TEXT_MEMORY}}"
60bcf0fa NC	56
	57
	58	VECTORS="
	59	/* If the 'vectors_addr' symbol is defined, it indicates the start address
	60	of interrupt vectors. This depends on the 68HC11 operating mode:
	61
	62	Addr
	63	Single chip 0xffc0
	64	Extended mode 0xffc0
	65	Bootstrap 0x00c0
	66	Test 0xbfc0
	67
	68	In general, the vectors address is 0xffc0. This can be overriden
	69	with the '-defsym vectors_addr=0xbfc0' ld option.
	70
	71	Note: for the bootstrap mode, the interrupt vectors are at 0xbfc0 but
	72	they are redirected to 0x00c0 by the internal PROM. Application's vectors
	73	must also consist of jump instructions (see Motorola's manual). */
	74
	75	PROVIDE (_vectors_addr = DEFINED (vectors_addr) ? vectors_addr : 0xffc0);
	76	.vectors DEFINED (vectors_addr) ? vectors_addr : 0xffc0 :
	77	{
	78	*(.vectors)
	79	}"
	80
	81	#
	82	# We provide two emulations: a fixed on that defines some memory banks
	83	# and a configurable one that includes a user provided memory definition.
	84	#
	85	case $GENERIC_BOARD in
	86	yes\|1\|YES)
	87	MEMORY_DEF="
	88	/* Get memory banks definition from some user configuration file.
	89	This file must be located in some linker directory (search path
	90	with -L<dir>). See fixed memory banks emulation script. */
	91	INCLUDE memory.x;
	92	"
	93	;;
	94	*)
	95	MEMORY_DEF="
	96	/* Fixed definition of the available memory banks.
	97	See generic emulation script for a user defined configuration. */
	98	MEMORY
	99	{
	100	page0 (rwx) : ORIGIN = 0x0, LENGTH = 256
	101	text (rx) : ORIGIN = ${ROM_START_ADDR}, LENGTH = ${ROM_SIZE}
	102	data : ORIGIN = ${RAM_START_ADDR}, LENGTH = ${RAM_SIZE}
a66c0f2c	103	eeprom : ORIGIN = ${EEPROM_START_ADDR}, LENGTH = ${EEPROM_SIZE}
60bcf0fa NC	104	}
	105
	106	/* Setup the stack on the top of the data memory bank. */
	107	PROVIDE (_stack = ${RAM_START_ADDR} + ${RAM_SIZE} - 1);
	108	"
	109	;;
	110	esac
	111
	112	STARTUP_CODE="
	113	/* Startup code. */
	114	(.install0) / Section should setup the stack pointer. */
	115	(.install1) / Place holder for applications. */
	116	(.install2) / Optional installation of data sections in RAM. */
	117	(.install3) / Place holder for applications. */
	118	(.install4) / Section that calls the main. */
	119	"
	120
de0b1853 SC	121	FINISH_CODE="
	122	/* Finish code. */
	123	(.fini0) / Beginning of finish code (_exit symbol). */
	124	(.fini1) / Place holder for applications. */
	125	(.fini2) / C++ destructors. */
	126	(.fini3) / Place holder for applications. */
	127	(.fini4) / Runtime exit. */
	128	"
	129
60bcf0fa NC	130	PRE_COMPUTE_DATA_SIZE="
	131	/* SCz: this does not work yet... This is supposed to force the loading
	132	of _map_data.o (from libgcc.a) when the .data section is not empty.
	133	By doing so, this should bring the code that copies the .data section
	134	from ROM to RAM at init time.
	135
	136	___pre_comp_data_size = SIZEOF(.data);
	137	__install_data_sections = ___pre_comp_data_size > 0 ?
	138	__map_data_sections : 0;
	139	*/
	140	"
	141
	142	INSTALL_RELOC="
	143	.install0 0 : { *(.install0) }
	144	.install1 0 : { *(.install1) }
	145	.install2 0 : { *(.install2) }
	146	.install3 0 : { *(.install3) }
	147	.install4 0 : { *(.install4) }
	148	"
	149
de0b1853 SC	150	FINISH_RELOC="
	151	.fini0 0 : { *(.fini0) }
	152	.fini1 0 : { *(.fini1) }
	153	.fini2 0 : { *(.fini2) }
	154	.fini3 0 : { *(.fini3) }
	155	.fini4 0 : { *(.fini4) }
	156	"
	157
60bcf0fa NC	158	BSS_DATA_RELOC="
	159	.data1 0 : { *(.data1) }
	160
	161	/* We want the small data sections together, so single-instruction offsets
	162	can access them all, and initialized data all before uninitialized, so
	163	we can shorten the on-disk segment size. */
	164	.sdata 0 : { *(.sdata) }
	165	.sbss 0 : { *(.sbss) }
	166	.scommon 0 : { *(.scommon) }
	167	"
	168
a66c0f2c SC	169	SOFT_REGS_RELOC="
	170	.softregs 0 : { *(.softregs) }
	171	"
	172
60bcf0fa NC	173	cat <<EOF
	174	${RELOCATING+/* Linker script for 68HC11 executable (PROM). */}
	175	${RELOCATING-/* Linker script for 68HC11 object file (ld -r). */}
	176
	177	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	178	"${LITTLE_OUTPUT_FORMAT}")
	179	OUTPUT_ARCH(${OUTPUT_ARCH})
	180	ENTRY(${ENTRY})
	181
	182	${RELOCATING+${LIB_SEARCH_DIRS}}
	183	${RELOCATING+${EXECUTABLE_SYMBOLS}}
	184	${RELOCATING+${MEMORY_DEF}}
	185
	186	SECTIONS
	187	{
	188	.hash ${RELOCATING-0} : { *(.hash) }
	189	.dynsym ${RELOCATING-0} : { *(.dynsym) }
	190	.dynstr ${RELOCATING-0} : { *(.dynstr) }
	191	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
	192	.gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) }
	193	.gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) }
	194
de0b1853 SC	195	.rel.text ${RELOCATING-0} :
	196	{
	197	*(.rel.text)
	198	${RELOCATING+(.rel.text.)}
	199	${RELOCATING+(.rel.gnu.linkonce.t.)}
	200	}
	201	.rela.text ${RELOCATING-0} :
	202	{
	203	*(.rela.text)
	204	${RELOCATING+(.rela.text.)}
	205	${RELOCATING+(.rela.gnu.linkonce.t.)}
	206	}
	207	.rel.data ${RELOCATING-0} :
	208	{
	209	*(.rel.data)
	210	${RELOCATING+(.rel.data.)}
	211	${RELOCATING+(.rel.gnu.linkonce.d.)}
	212	}
	213	.rela.data ${RELOCATING-0} :
	214	{
	215	*(.rela.data)
	216	${RELOCATING+(.rela.data.)}
	217	${RELOCATING+(.rela.gnu.linkonce.d.)}
	218	}
	219	.rel.rodata ${RELOCATING-0} :
	220	{
	221	*(.rel.rodata)
	222	${RELOCATING+(.rel.rodata.)}
	223	${RELOCATING+(.rel.gnu.linkonce.r.)}
	224	}
	225	.rela.rodata ${RELOCATING-0} :
	226	{
	227	*(.rela.rodata)
	228	${RELOCATING+(.rela.rodata.)}
	229	${RELOCATING+(.rela.gnu.linkonce.r.)}
	230	}
	231	.rel.sdata ${RELOCATING-0} :
	232	{
	233	*(.rel.sdata)
	234	${RELOCATING+(.rel.sdata.)}
	235	${RELOCATING+(.rel.gnu.linkonce.s.)}
	236	}
	237	.rela.sdata ${RELOCATING-0} :
	238	{
	239	*(.rela.sdata)
	240	${RELOCATING+(.rela.sdata.)}
	241	${RELOCATING+(.rela.gnu.linkonce.s.)}
	242	}
	243	.rel.sbss ${RELOCATING-0} :
	244	{
	245	*(.rel.sbss)
	246	${RELOCATING+(.rel.sbss.)}
	247	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	248	}
	249	.rela.sbss ${RELOCATING-0} :
	250	{
	251	*(.rela.sbss)
	252	${RELOCATING+(.rela.sbss.)}
	253	${RELOCATING+(.rel.gnu.linkonce.sb.)}
	254	}
	255	.rel.bss ${RELOCATING-0} :
	256	{
	257	*(.rel.bss)
	258	${RELOCATING+(.rel.bss.)}
259	${RELOCATING+(.rel.gnu.linkonce.b.)}
260	}
261	.rela.bss ${RELOCATING-0} :
262	{
263	*(.rela.bss)
264	${RELOCATING+(.rela.bss.)}
265	${RELOCATING+(.rela.gnu.linkonce.b.)}
266	}
60bcf0fa NC	267	.rela.stext ${RELOCATING-0} : { *(.rela.stest) }
	268	.rela.etext ${RELOCATING-0} : { *(.rela.etest) }
	269	.rela.sdata ${RELOCATING-0} : { *(.rela.sdata) }
	270	.rela.edata ${RELOCATING-0} : { *(.rela.edata) }
	271	.rela.eit_v ${RELOCATING-0} : { *(.rela.eit_v) }
60bcf0fa NC	272	.rela.ebss ${RELOCATING-0} : { *(.rela.ebss) }
	273	.rela.srodata ${RELOCATING-0} : { *(.rela.srodata) }
	274	.rela.erodata ${RELOCATING-0} : { *(.rela.erodata) }
	275	.rela.got ${RELOCATING-0} : { *(.rela.got) }
	276	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
	277	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
	278	.rela.init ${RELOCATING-0} : { *(.rela.init) }
	279	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
60bcf0fa NC	280	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
60bcf0fa NC	281
60bcf0fa NC	282	.rel.stext ${RELOCATING-0} : { *(.rel.stest) }
	283	.rel.etext ${RELOCATING-0} : { *(.rel.etest) }
	284	.rel.sdata ${RELOCATING-0} : { *(.rel.sdata) }
	285	.rel.edata ${RELOCATING-0} : { *(.rel.edata) }
60bcf0fa NC	286	.rel.ebss ${RELOCATING-0} : { *(.rel.ebss) }
	287	.rel.eit_v ${RELOCATING-0} : { *(.rel.eit_v) }
	288	.rel.srodata ${RELOCATING-0} : { *(.rel.srodata) }
	289	.rel.erodata ${RELOCATING-0} : { *(.rel.erodata) }
	290	.rel.got ${RELOCATING-0} : { *(.rel.got) }
	291	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
	292	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
	293	.rel.init ${RELOCATING-0} : { *(.rel.init) }
	294	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
60bcf0fa NC	295	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
	296
	297	/* Concatenate .page0 sections. Put them in the page0 memory bank
	298	unless we are creating a relocatable file. */
	299	.page0 :
	300	{
	301	*(.page0)
a66c0f2c	302	${RELOCATING+*(.softregs)}
60bcf0fa NC	303	} ${RELOCATING+ > page0}
	304
	305	/* Start of text section. */
	306	.stext ${RELOCATING-0} :
	307	{
	308	*(.stext)
	309	} ${RELOCATING+ > ${TEXT_MEMORY}}
	310
	311	.init ${RELOCATING-0} :
	312	{
	313	*(.init)
	314	} ${RELOCATING+=${NOP-0}}
	315
	316	${RELOCATING-${INSTALL_RELOC}}
de0b1853	317	${RELOCATING-${FINISH_RELOC}}
60bcf0fa NC	318
	319	.text ${RELOCATING-0}:
	320	{
	321	/* Put startup code at beginning so that _start keeps same address. */
	322	${RELOCATING+${STARTUP_CODE}}
	323
	324	${RELOCATING+*(.init)}
	325	*(.text)
de0b1853	326	${RELOCATING+(.text.)}
60bcf0fa NC	327	/* .gnu.warning sections are handled specially by elf32.em. */
60bcf0fa NC	328	*(.gnu.warning)
de0b1853 SC	329	${RELOCATING+(.gnu.linkonce.t.)}
	330
	331	${RELOCATING+${FINISH_CODE}}
60bcf0fa NC	332
	333	${RELOCATING+_etext = .;}
	334	${RELOCATING+PROVIDE (etext = .);}
	335
	336	} ${RELOCATING+ > ${TEXT_MEMORY}}
	337
	338	.eh_frame ${RELOCATING-0} :
	339	{
24098abb	340	KEEP (*(.eh_frame))
60bcf0fa NC	341	} ${RELOCATING+ > ${TEXT_MEMORY}}
	342
	343	.rodata ${RELOCATING-0} :
	344	{
	345	*(.rodata)
de0b1853 SC	346	${RELOCATING+(.rodata.)}
de0b1853 SC	347	${RELOCATING+(.gnu.linkonce.r)}
60bcf0fa NC	348	} ${RELOCATING+ > ${TEXT_MEMORY}}
	349
	350	.rodata1 ${RELOCATING-0} :
	351	{
	352	*(.rodata1)
	353	} ${RELOCATING+ > ${TEXT_MEMORY}}
	354
de0b1853 SC	355	/* Constructor and destructor tables are in ROM. */
	356	${RELOCATING+${CTOR}}
	357	${RELOCATING+${DTOR}}
	358
24098abb RH	359	.jcr ${RELOCATING-0} :
	360	{
	361	KEEP (*(.jcr))
	362	} ${RELOCATING+ > ${TEXT_MEMORY}}
	363
60bcf0fa NC	364	/* Start of the data section image in ROM. */
	365	${RELOCATING+__data_image = .;}
	366	${RELOCATING+PROVIDE (__data_image = .);}
	367
	368	/* All read-only sections that normally go in PROM must be above.
	369	We construct the DATA image section in PROM at end of all these
	370	read-only sections. The data image must be copied at init time.
	371	Refer to GNU ld, Section 3.6.8.2 Output Section LMA. */
	372	.data ${RELOCATING-0} : ${RELOCATING+AT (__data_image)}
	373	{
	374	${RELOCATING+__data_section_start = .;}
	375	${RELOCATING+PROVIDE (__data_section_start = .);}
	376
	377	${RELOCATING+${DATA_START_SYMBOLS}}
	378	${RELOCATING+*(.sdata)}
	379	*(.data)
de0b1853	380	${RELOCATING+(.data.)}
60bcf0fa	381	${RELOCATING+*(.data1)}
de0b1853	382	${RELOCATING+(.gnu.linkonce.d.)}
60bcf0fa NC	383	${CONSTRUCTING+CONSTRUCTORS}
	384
	385	${RELOCATING+_edata = .;}
	386	${RELOCATING+PROVIDE (edata = .);}
	387	} ${RELOCATING+ > ${DATA_MEMORY}}
	388
	389	${RELOCATING+__data_section_size = SIZEOF(.data);}
	390	${RELOCATING+PROVIDE (__data_section_size = SIZEOF(.data));}
	391	${RELOCATING+__data_image_end = __data_image + __data_section_size;}
	392
	393	${RELOCATING+${PRE_COMPUTE_DATA_SIZE}}
	394
	395	/* .install ${RELOCATING-0}:
	396	{
	397	. = _data_image_end;
	398	} ${RELOCATING+ > ${TEXT_MEMORY}} */
	399
	400	/* Relocation for some bss and data sections. */
	401	${RELOCATING-${BSS_DATA_RELOC}}
a66c0f2c	402	${RELOCATING-${SOFT_REGS_RELOC}}
60bcf0fa NC	403
	404	.bss ${RELOCATING-0} :
	405	{
	406	${RELOCATING+__bss_start = .;}
	407	${RELOCATING+*(.sbss)}
	408	${RELOCATING+*(.scommon)}
	409
	410	*(.dynbss)
	411	*(.bss)
de0b1853 SC	412	${RELOCATING+(.bss.)}
de0b1853 SC	413	${RELOCATING+(.gnu.linkonce.b.)}
60bcf0fa NC	414	*(COMMON)
	415	${RELOCATING+PROVIDE (_end = .);}
	416	} ${RELOCATING+ > ${DATA_MEMORY}}
236d5abf NC	417	${RELOCATING+__bss_size = SIZEOF(.bss);}
236d5abf NC	418	${RELOCATING+PROVIDE (__bss_size = SIZEOF(.bss));}
60bcf0fa	419
a66c0f2c SC	420	.eeprom ${RELOCATING-0} :
	421	{
	422	*(.eeprom)
	423	(.eeprom.)
	424	} ${RELOCATING+ > ${EEPROM_MEMORY}}
	425
60bcf0fa NC	426	${RELOCATING+${VECTORS}}
	427
	428	/* Stabs debugging sections. */
	429	.stab 0 : { *(.stab) }
	430	.stabstr 0 : { *(.stabstr) }
	431	.stab.excl 0 : { *(.stab.excl) }
	432	.stab.exclstr 0 : { *(.stab.exclstr) }
	433	.stab.index 0 : { *(.stab.index) }
	434	.stab.indexstr 0 : { *(.stab.indexstr) }
	435
	436	.comment 0 : { *(.comment) }
	437
	438	/* DWARF debug sections.
	439	Symbols in the DWARF debugging sections are relative to the beginning
	440	of the section so we begin them at 0.
	441	Treatment of DWARF debug section must be at end of the linker
	442	script to avoid problems when there are undefined symbols. It's necessary
	443	to avoid that the DWARF section is relocated before such undefined
	444	symbols are found. */
	445
	446	/* DWARF 1 */
	447	.debug 0 : { *(.debug) }
	448	.line 0 : { *(.line) }
	449
	450	/* GNU DWARF 1 extensions */
	451	.debug_srcinfo 0 : { *(.debug_srcinfo) }
	452	.debug_sfnames 0 : { *(.debug_sfnames) }
	453
	454	/* DWARF 1.1 and DWARF 2 */
	455	.debug_aranges 0 : { *(.debug_aranges) }
	456	.debug_pubnames 0 : { *(.debug_pubnames) }
	457
	458	/* DWARF 2 */
3a9d486c	459	.debug_info 0 : { (.debug_info) (.gnu.linkonce.wi.*) }
60bcf0fa NC	460	.debug_abbrev 0 : { *(.debug_abbrev) }
	461	.debug_line 0 : { *(.debug_line) }
	462	.debug_frame 0 : { *(.debug_frame) }
	463	.debug_str 0 : { *(.debug_str) }
	464	.debug_loc 0 : { *(.debug_loc) }
	465	.debug_macinfo 0 : { *(.debug_macinfo) }
	466	}
	467	EOF