[deliverable/binutils-gdb.git] / ld / scripttempl / mep.sc

#
# Unusual variables checked by this code:
#	NOP - four byte opcode for no-op (defaults to 0)
#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
#		empty.
#	SMALL_DATA_CTOR - .ctors contains small data.
#	SMALL_DATA_DTOR - .dtors contains small data.
#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
#	INITIAL_READONLY_SECTIONS - at start of text segment
#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
#		(e.g., .PARISC.milli)
#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
#		(e.g., .PARISC.global)
#	OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
#		(e.g. PPC32 .fixup, .got[12])
#	OTHER_BSS_SECTIONS - other than .bss .sbss ...
#	OTHER_SECTIONS - at the end
#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
#		executable (e.g., _DYNAMIC_LINK)
#       TEXT_START_ADDR - the first byte of the text segment, after any
#               headers.
#       TEXT_BASE_ADDRESS - the first byte of the text segment.
#	TEXT_START_SYMBOLS - symbols that appear at the start of the
#		.text section.
#	DATA_START_SYMBOLS - symbols that appear at the start of the
#		.data section.
#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
#	OTHER_GOT_SECTIONS - sections just after .got.
#	OTHER_SDATA_SECTIONS - sections just after .sdata.
#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
#		.bss section besides __bss_start.
#	DATA_PLT - .plt should be in data segment, not text segment.
#	PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
#	BSS_PLT - .plt should be in bss segment
#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
#	EMBEDDED - whether this is for an embedded system. 
#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
#		start address of shared library.
#	INPUT_FILES - INPUT command of files to always include
#	WRITABLE_RODATA - if set, the .rodata section should be writable
#	INIT_START, INIT_END -  statements just before and just after
# 	combination of .init sections.
#	FINI_START, FINI_END - statements just before and just after
# 	combination of .fini sections.
#	STACK_ADDR - start of a .stack section.
#	OTHER_END_SYMBOLS - symbols to place right at the end of the script.
#	SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
#		so that .got can be in the RELRO area.  It should be set to
#		the number of bytes in the beginning of .got.plt which can be
#		in the RELRO area as well.
#
# When adding sections, do note that the names of some sections are used
# when specifying the start address of the next.
#

#  Many sections come in three flavours.  There is the 'real' section,
#  like ".data".  Then there are the per-procedure or per-variable
#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
#  and useful for --gc-sections, which for a variable "foo" might be
#  ".data.foo".  Then there are the linkonce sections, for which the linker
#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
#  The exact correspondences are:
#
#  Section	Linkonce section
#  .text	.gnu.linkonce.t.foo
#  .rodata	.gnu.linkonce.r.foo
#  .data	.gnu.linkonce.d.foo
#  .bss		.gnu.linkonce.b.foo
#  .sdata	.gnu.linkonce.s.foo
#  .sbss	.gnu.linkonce.sb.foo
#  .sdata2	.gnu.linkonce.s2.foo
#  .sbss2	.gnu.linkonce.sb2.foo
#  .debug_info	.gnu.linkonce.wi.foo
#  .tdata	.gnu.linkonce.td.foo
#  .tbss	.gnu.linkonce.tb.foo
#
#  Each of these can also have corresponding .rel.* and .rela.* sections.

test -z "$ENTRY" && ENTRY=_start
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
test -z "${ELFSIZE}" && ELFSIZE=32
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
test "$LD_FLAG" = "N" && DATA_ADDR=.
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
DATA_SEGMENT_RELRO_END=""
DATA_SEGMENT_RELRO_GOTPLT_END=""
DATA_SEGMENT_END=""
if test -n "${COMMONPAGESIZE}"; then
  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  if test -n "${SEPARATE_GOTPLT}"; then
    DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
  else
    DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
  fi
fi
INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
if test -z "$GOT"; then
  if test -z "$SEPARATE_GOTPLT"; then
    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
  else
    GOT=".got          ${RELOCATING-0} : { *(.got) }"
    GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
  .got.plt      ${RELOCATING-0} : { *(.got.plt) }"
  fi
fi
DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
if test -z "${NO_SMALL_DATA}"; then
  SBSS=".sbss         ${RELOCATING-0} :
  {
    ${RELOCATING+PROVIDE (__sbss_start = .);}
    ${RELOCATING+PROVIDE (___sbss_start = .);}
    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
    *(.dynsbss)
    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
    *(.scommon)
    ${RELOCATING+PROVIDE (__sbss_end = .);}
    ${RELOCATING+PROVIDE (___sbss_end = .);}
  }"
  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  SDATA="/* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata        ${RELOCATING-0} : 
  {
    ${RELOCATING+${SDATA_START_SYMBOLS}}
    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  }"
  SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
else
  NO_SMALL_DATA=" "
fi
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
CTOR=".ctors        ${CONSTRUCTING-0} : 
  {
    ${CONSTRUCTING+${CTOR_START}}
    /* gcc uses crtbegin.o to find the start of
       the constructors, so we make sure it is
       first.  Because this is a wildcard, it
       doesn't matter if the user does not
       actually link against crtbegin.o; the
       linker won't look for a file to match a
       wildcard.  The wildcard also means that it
       doesn't matter which directory crtbegin.o
       is in.  */

    KEEP (*crtbegin*.o(.ctors))

    /* We don't want to include the .ctor section from
       from the crtend.o file until after the sorted ctors.
       The .ctor section from the crtend file contains the
       end of ctors marker and it must be last */

    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
    KEEP (*(SORT(.ctors.*)))
    KEEP (*(.ctors))
    ${CONSTRUCTING+${CTOR_END}}
  }"
DTOR=".dtors        ${CONSTRUCTING-0} :
  {
    ${CONSTRUCTING+${DTOR_START}}
    KEEP (*crtbegin*.o(.dtors))
    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
    KEEP (*(SORT(.dtors.*)))
    KEEP (*(.dtors))
    ${CONSTRUCTING+${DTOR_END}}
  }"
STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
  {
    ${RELOCATING+_stack = .;}
    *(.stack)
  }"

# if this is for an embedded system, don't add SIZEOF_HEADERS.
if [ -z "$EMBEDDED" ]; then
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
else
   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
fi

cat <<EOF
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
	      "${LITTLE_OUTPUT_FORMAT}")
OUTPUT_ARCH(${OUTPUT_ARCH})
ENTRY(${ENTRY})

${RELOCATING+${LIB_SEARCH_DIRS}}
${RELOCATING+/* Do we need any of these for elf?
   __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
${RELOCATING+${EXECUTABLE_SYMBOLS}}
${RELOCATING+${INPUT_FILES}}
${RELOCATING- /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */}

SECTIONS
{
  /* Read-only sections, merged into text segment: */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
  ${CREATE_SHLIB-${INTERP}}
  ${INITIAL_READONLY_SECTIONS}
  ${TEXT_DYNAMIC+${DYNAMIC}}
  .hash         ${RELOCATING-0} : { *(.hash) }
  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }

EOF
if [ "x$COMBRELOC" = x ]; then
  COMBRELOCCAT=cat
else
  COMBRELOCCAT="cat > $COMBRELOC"
fi
eval $COMBRELOCCAT <<EOF
  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
  ${OTHER_READONLY_RELOC_SECTIONS}
  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
  .rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) }
  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
  ${OTHER_GOT_RELOC_SECTIONS}
  ${REL_SDATA}
  ${REL_SBSS}
  ${REL_SDATA2}
  ${REL_SBSS2}
  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
EOF
if [ -n "$COMBRELOC" ]; then
cat <<EOF
  .rel.dyn      ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
cat <<EOF
    }
  .rela.dyn     ${RELOCATING-0} :
    {
EOF
sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
cat <<EOF
    }
EOF
fi
cat <<EOF
  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
  ${OTHER_PLT_RELOC_SECTIONS}

  .init         ${RELOCATING-0} : 
  { 
    ${RELOCATING+${INIT_START}}
    KEEP (*(.init))
    ${RELOCATING+${INIT_END}}
  } =${NOP-0}

  ${DATA_PLT-${BSS_PLT-${PLT}}}
  .text         ${RELOCATING-0} :
  {
    ${RELOCATING+${TEXT_START_SYMBOLS}}
    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
    KEEP (*(.text.*personality*))
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
  } =${NOP-0}
  .fini         ${RELOCATING-0} :
  {
    ${RELOCATING+${FINI_START}}
    KEEP (*(.fini))
    ${RELOCATING+${FINI_END}}
  } =${NOP-0}
  ${RELOCATING+PROVIDE (__etext = .);}
  ${RELOCATING+PROVIDE (_etext = .);}
  ${RELOCATING+PROVIDE (etext = .);}
  ${WRITABLE_RODATA-${RODATA}}
  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
  ${CREATE_SHLIB-${SDATA2}}
  ${CREATE_SHLIB-${SBSS2}}
  ${OTHER_READONLY_SECTIONS}
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }

  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}

  /* Exception handling  */
  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }

  /* Thread Local Storage sections  */
  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }

  .preinit_array   ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
  .init_array   ${RELOCATING-0} : { KEEP (*(.init_array)) }
  .fini_array   ${RELOCATING-0} : { KEEP (*(.fini_array)) }

  ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }

  ${RELOCATING+${DATARELRO}}
  ${OTHER_RELRO_SECTIONS}
  ${TEXT_DYNAMIC-${DYNAMIC}}
  ${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
  ${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}

  ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}

  .data         ${RELOCATING-0} :
  {
    ${RELOCATING+${DATA_START_SYMBOLS}}
    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
    KEEP (*(.gnu.linkonce.d.*personality*))
    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
  }
  .data1        ${RELOCATING-0} : { *(.data1) }
  ${WRITABLE_RODATA+${RODATA}}
  ${OTHER_READWRITE_SECTIONS}
  ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
  ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
  ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
  ${RELOCATING+${OTHER_GOT_SYMBOLS}}
  ${NO_SMALL_DATA-${GOT}}
  ${OTHER_GOT_SECTIONS}
  ${SDATA}
  ${OTHER_SDATA_SECTIONS}
  ${RELOCATING+_edata = .;}
  ${RELOCATING+PROVIDE (edata = .);}
  ${RELOCATING+__bss_start = .;}
  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
  ${SBSS}
  ${BSS_PLT+${PLT}}
  .bss          ${RELOCATING-0} :
  {
   *(.dynbss)
   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.  */
   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  }
  ${OTHER_BSS_SECTIONS}
  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
  ${RELOCATING+_end = .;}
  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
  ${RELOCATING+PROVIDE (end = .);}
  ${RELOCATING+${DATA_SEGMENT_END}}

  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }

  .comment       0 : { *(.comment) }

  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */

  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }

  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }

  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }

  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }

  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }

  ${STACK_ADDR+${STACK}}
  ${OTHER_SECTIONS}
  ${RELOCATING+${OTHER_END_SYMBOLS}}
  ${RELOCATING+${DISCARDED}}
}
EOF
Commit	Line	Data
19d9b7d3 DB	1	#
	2	# Unusual variables checked by this code:
	3	# NOP - four byte opcode for no-op (defaults to 0)
	4	# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
	5	# empty.
	6	# SMALL_DATA_CTOR - .ctors contains small data.
	7	# SMALL_DATA_DTOR - .dtors contains small data.
	8	# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
	9	# INITIAL_READONLY_SECTIONS - at start of text segment
	10	# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
	11	# (e.g., .PARISC.milli)
	12	# OTHER_TEXT_SECTIONS - these get put in .text when relocating
	13	# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
	14	# (e.g., .PARISC.global)
	15	# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
	16	# (e.g. PPC32 .fixup, .got[12])
	17	# OTHER_BSS_SECTIONS - other than .bss .sbss ...
	18	# OTHER_SECTIONS - at the end
	19	# EXECUTABLE_SYMBOLS - symbols that must be defined for an
	20	# executable (e.g., _DYNAMIC_LINK)
	21	# TEXT_START_ADDR - the first byte of the text segment, after any
	22	# headers.
	23	# TEXT_BASE_ADDRESS - the first byte of the text segment.
	24	# TEXT_START_SYMBOLS - symbols that appear at the start of the
	25	# .text section.
	26	# DATA_START_SYMBOLS - symbols that appear at the start of the
	27	# .data section.
	28	# OTHER_GOT_SYMBOLS - symbols defined just before .got.
	29	# OTHER_GOT_SECTIONS - sections just after .got.
	30	# OTHER_SDATA_SECTIONS - sections just after .sdata.
	31	# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
	32	# .bss section besides __bss_start.
	33	# DATA_PLT - .plt should be in data segment, not text segment.
	34	# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
	35	# BSS_PLT - .plt should be in bss segment
	36	# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
	37	# EMBEDDED - whether this is for an embedded system.
	38	# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
	39	# start address of shared library.
	40	# INPUT_FILES - INPUT command of files to always include
	41	# WRITABLE_RODATA - if set, the .rodata section should be writable
	42	# INIT_START, INIT_END - statements just before and just after
	43	# combination of .init sections.
	44	# FINI_START, FINI_END - statements just before and just after
	45	# combination of .fini sections.
	46	# STACK_ADDR - start of a .stack section.
	47	# OTHER_END_SYMBOLS - symbols to place right at the end of the script.
	48	# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
	49	# so that .got can be in the RELRO area. It should be set to
	50	# the number of bytes in the beginning of .got.plt which can be
	51	# in the RELRO area as well.
	52	#
	53	# When adding sections, do note that the names of some sections are used
	54	# when specifying the start address of the next.
	55	#
	56
	57	# Many sections come in three flavours. There is the 'real' section,
	58	# like ".data". Then there are the per-procedure or per-variable
	59	# sections, generated by -ffunction-sections and -fdata-sections in GCC,
	60	# and useful for --gc-sections, which for a variable "foo" might be
	61	# ".data.foo". Then there are the linkonce sections, for which the linker
	62	# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
	63	# The exact correspondences are:
	64	#
65	# Section Linkonce section
66	# .text .gnu.linkonce.t.foo
67	# .rodata .gnu.linkonce.r.foo
68	# .data .gnu.linkonce.d.foo
69	# .bss .gnu.linkonce.b.foo
70	# .sdata .gnu.linkonce.s.foo
71	# .sbss .gnu.linkonce.sb.foo
72	# .sdata2 .gnu.linkonce.s2.foo
73	# .sbss2 .gnu.linkonce.sb2.foo
74	# .debug_info .gnu.linkonce.wi.foo
75	# .tdata .gnu.linkonce.td.foo
76	# .tbss .gnu.linkonce.tb.foo
77	#
78	# Each of these can also have corresponding .rel.* and .rela.* sections.
79
80	test -z "$ENTRY" && ENTRY=_start
81	test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
82	test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
83	if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
84	test -z "${ELFSIZE}" && ELFSIZE=32
85	test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
86	test "$LD_FLAG" = "N" && DATA_ADDR=.
87	test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
88	test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
89	test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
90	DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
91	DATA_SEGMENT_RELRO_END=""
92	DATA_SEGMENT_RELRO_GOTPLT_END=""
93	DATA_SEGMENT_END=""
94	if test -n "${COMMONPAGESIZE}"; then
95	DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
96	DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
97	if test -n "${SEPARATE_GOTPLT}"; then
98	DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT}, .);"
99	else
100	DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (0, .);"
101	fi
102	fi
103	INTERP=".interp ${RELOCATING-0} : { *(.interp) }"
104	PLT=".plt ${RELOCATING-0} : { *(.plt) }"
105	if test -z "$GOT"; then
106	if test -z "$SEPARATE_GOTPLT"; then
107	GOT=".got ${RELOCATING-0} : { (.got.plt) (.got) }"
108	else
109	GOT=".got ${RELOCATING-0} : { *(.got) }"
110	GOTPLT="${RELOCATING+${DATA_SEGMENT_RELRO_GOTPLT_END}}
111	.got.plt ${RELOCATING-0} : { *(.got.plt) }"
112	fi
113	fi
114	DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
115	RODATA=".rodata ${RELOCATING-0} : { (.rodata${RELOCATING+ .rodata. .gnu.linkonce.r.*}) }"
116	DATARELRO=".data.rel.ro : { (.data.rel.ro.local) (.data.rel.ro*) }"
1c68693b	117	DISCARDED="/DISCARD/ : { (.note.GNU-stack) (.gnu_debuglink) }"
19d9b7d3 DB	118	if test -z "${NO_SMALL_DATA}"; then
	119	SBSS=".sbss ${RELOCATING-0} :
	120	{
	121	${RELOCATING+PROVIDE (__sbss_start = .);}
	122	${RELOCATING+PROVIDE (___sbss_start = .);}
	123	${CREATE_SHLIB+(.sbss2 .sbss2. .gnu.linkonce.sb2.*)}
	124	*(.dynsbss)
	125	(.sbss${RELOCATING+ .sbss. .gnu.linkonce.sb.*})
	126	*(.scommon)
	127	${RELOCATING+PROVIDE (__sbss_end = .);}
	128	${RELOCATING+PROVIDE (___sbss_end = .);}
	129	}"
	130	SBSS2=".sbss2 ${RELOCATING-0} : { (.sbss2${RELOCATING+ .sbss2. .gnu.linkonce.sb2.*}) }"
	131	SDATA="/* We want the small data sections together, so single-instruction offsets
	132	can access them all, and initialized data all before uninitialized, so
	133	we can shorten the on-disk segment size. */
	134	.sdata ${RELOCATING-0} :
	135	{
	136	${RELOCATING+${SDATA_START_SYMBOLS}}
	137	${CREATE_SHLIB+(.sdata2 .sdata2. .gnu.linkonce.s2.*)}
	138	(.sdata${RELOCATING+ .sdata. .gnu.linkonce.s.*})
	139	}"
	140	SDATA2=".sdata2 ${RELOCATING-0} : { (.sdata2${RELOCATING+ .sdata2. .gnu.linkonce.s2.*}) }"
	141	REL_SDATA=".rel.sdata ${RELOCATING-0} : { (.rel.sdata${RELOCATING+ .rel.sdata. .rel.gnu.linkonce.s.*}) }
	142	.rela.sdata ${RELOCATING-0} : { (.rela.sdata${RELOCATING+ .rela.sdata. .rela.gnu.linkonce.s.*}) }"
	143	REL_SBSS=".rel.sbss ${RELOCATING-0} : { (.rel.sbss${RELOCATING+ .rel.sbss. .rel.gnu.linkonce.sb.*}) }
	144	.rela.sbss ${RELOCATING-0} : { (.rela.sbss${RELOCATING+ .rela.sbss. .rela.gnu.linkonce.sb.*}) }"
	145	REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { (.rel.sdata2${RELOCATING+ .rel.sdata2. .rel.gnu.linkonce.s2.*}) }
	146	.rela.sdata2 ${RELOCATING-0} : { (.rela.sdata2${RELOCATING+ .rela.sdata2. .rela.gnu.linkonce.s2.*}) }"
	147	REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { (.rel.sbss2${RELOCATING+ .rel.sbss2. .rel.gnu.linkonce.sb2.*}) }
	148	.rela.sbss2 ${RELOCATING-0} : { (.rela.sbss2${RELOCATING+ .rela.sbss2. .rela.gnu.linkonce.sb2.*}) }"
	149	else
	150	NO_SMALL_DATA=" "
	151	fi
	152	test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
	153	CTOR=".ctors ${CONSTRUCTING-0} :
	154	{
	155	${CONSTRUCTING+${CTOR_START}}
	156	/* gcc uses crtbegin.o to find the start of
	157	the constructors, so we make sure it is
	158	first. Because this is a wildcard, it
	159	doesn't matter if the user does not
	160	actually link against crtbegin.o; the
	161	linker won't look for a file to match a
	162	wildcard. The wildcard also means that it
	163	doesn't matter which directory crtbegin.o
	164	is in. */
	165
	166	KEEP (crtbegin.o(.ctors))
	167
	168	/* We don't want to include the .ctor section from
	169	from the crtend.o file until after the sorted ctors.
	170	The .ctor section from the crtend file contains the
	171	end of ctors marker and it must be last */
	172
	173	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
	174	KEEP ((SORT(.ctors.)))
	175	KEEP (*(.ctors))
	176	${CONSTRUCTING+${CTOR_END}}
	177	}"
	178	DTOR=".dtors ${CONSTRUCTING-0} :
	179	{
	180	${CONSTRUCTING+${DTOR_START}}
	181	KEEP (crtbegin.o(.dtors))
182	KEEP ((EXCLUDE_FILE (crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
183	KEEP ((SORT(.dtors.)))
184	KEEP (*(.dtors))
185	${CONSTRUCTING+${DTOR_END}}
186	}"
187	STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
188	{
189	${RELOCATING+_stack = .;}
190	*(.stack)
191	}"
192
193	# if this is for an embedded system, don't add SIZEOF_HEADERS.
194	if [ -z "$EMBEDDED" ]; then
195	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
196	else
197	test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
198	fi
199
200	cat <<EOF
201	OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
202	"${LITTLE_OUTPUT_FORMAT}")
203	OUTPUT_ARCH(${OUTPUT_ARCH})
204	ENTRY(${ENTRY})
205
206	${RELOCATING+${LIB_SEARCH_DIRS}}
207	${RELOCATING+/* Do we need any of these for elf?
208	__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */}
209	${RELOCATING+${EXECUTABLE_SYMBOLS}}
210	${RELOCATING+${INPUT_FILES}}
211	${RELOCATING- /* For some reason, the Solaris linker makes bad executables
212	if gld -r is used and the intermediate file has sections starting
213	at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
214	bug. But for now assigning the zero vmas works. */}
215
216	SECTIONS
217	{
218	/* Read-only sections, merged into text segment: */
219	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
220	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
221	${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
222	${CREATE_SHLIB-${INTERP}}
223	${INITIAL_READONLY_SECTIONS}
224	${TEXT_DYNAMIC+${DYNAMIC}}
225	.hash ${RELOCATING-0} : { *(.hash) }
226	.dynsym ${RELOCATING-0} : { *(.dynsym) }
227	.dynstr ${RELOCATING-0} : { *(.dynstr) }
228	.gnu.version ${RELOCATING-0} : { *(.gnu.version) }
229	.gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
230	.gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
231
232	EOF
233	if [ "x$COMBRELOC" = x ]; then
234	COMBRELOCCAT=cat
235	else
236	COMBRELOCCAT="cat > $COMBRELOC"
237	fi
238	eval $COMBRELOCCAT <<EOF
239	.rel.init ${RELOCATING-0} : { *(.rel.init) }
240	.rela.init ${RELOCATING-0} : { *(.rela.init) }
241	.rel.text ${RELOCATING-0} : { (.rel.text${RELOCATING+ .rel.text. .rel.gnu.linkonce.t.*}) }
242	.rela.text ${RELOCATING-0} : { (.rela.text${RELOCATING+ .rela.text. .rela.gnu.linkonce.t.*}) }
243	.rel.fini ${RELOCATING-0} : { *(.rel.fini) }
244	.rela.fini ${RELOCATING-0} : { *(.rela.fini) }
245	.rel.rodata ${RELOCATING-0} : { (.rel.rodata${RELOCATING+ .rel.rodata. .rel.gnu.linkonce.r.*}) }
246	.rela.rodata ${RELOCATING-0} : { (.rela.rodata${RELOCATING+ .rela.rodata. .rela.gnu.linkonce.r.*}) }
247	${OTHER_READONLY_RELOC_SECTIONS}
248	.rel.data.rel.ro ${RELOCATING-0} : { (.rel.data.rel.ro${RELOCATING+}) }
249	.rela.data.rel.ro ${RELOCATING-0} : { (.rel.data.rel.ro${RELOCATING+}) }
250	.rel.data ${RELOCATING-0} : { (.rel.data${RELOCATING+ .rel.data. .rel.gnu.linkonce.d.*}) }
251	.rela.data ${RELOCATING-0} : { (.rela.data${RELOCATING+ .rela.data. .rela.gnu.linkonce.d.*}) }
252	.rel.tdata ${RELOCATING-0} : { (.rel.tdata${RELOCATING+ .rel.tdata. .rel.gnu.linkonce.td.*}) }
253	.rela.tdata ${RELOCATING-0} : { (.rela.tdata${RELOCATING+ .rela.tdata. .rela.gnu.linkonce.td.*}) }
254	.rel.tbss ${RELOCATING-0} : { (.rel.tbss${RELOCATING+ .rel.tbss. .rel.gnu.linkonce.tb.*}) }
255	.rela.tbss ${RELOCATING-0} : { (.rela.tbss${RELOCATING+ .rela.tbss. .rela.gnu.linkonce.tb.*}) }
256	.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
257	.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
258	.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
259	.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
260	.rel.got ${RELOCATING-0} : { *(.rel.got) }
261	.rela.got ${RELOCATING-0} : { *(.rela.got) }
262	${OTHER_GOT_RELOC_SECTIONS}
263	${REL_SDATA}
264	${REL_SBSS}
265	${REL_SDATA2}
266	${REL_SBSS2}
267	.rel.bss ${RELOCATING-0} : { (.rel.bss${RELOCATING+ .rel.bss. .rel.gnu.linkonce.b.*}) }
268	.rela.bss ${RELOCATING-0} : { (.rela.bss${RELOCATING+ .rela.bss. .rela.gnu.linkonce.b.*}) }
269	EOF
270	if [ -n "$COMBRELOC" ]; then
271	cat <<EOF
272	.rel.dyn ${RELOCATING-0} :
273	{
274	EOF
275	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rela\./d;s/^.: { \(.\)}$/ \1/' $COMBRELOC
276	cat <<EOF
277	}
278	.rela.dyn ${RELOCATING-0} :
279	{
280	EOF
281	sed -e '/^[ ][{}][ ]$/d;/:[ ]$/d;/\.rel\./d;s/^.: { \(.\)}/ \1/' $COMBRELOC
282	cat <<EOF
283	}
284	EOF
285	fi
286	cat <<EOF
287	.rel.plt ${RELOCATING-0} : { *(.rel.plt) }
288	.rela.plt ${RELOCATING-0} : { *(.rela.plt) }
289	${OTHER_PLT_RELOC_SECTIONS}
290
291	.init ${RELOCATING-0} :
292	{
293	${RELOCATING+${INIT_START}}
294	KEEP (*(.init))
295	${RELOCATING+${INIT_END}}
296	} =${NOP-0}
297
298	${DATA_PLT-${BSS_PLT-${PLT}}}
299	.text ${RELOCATING-0} :
300	{
301	${RELOCATING+${TEXT_START_SYMBOLS}}
302	(.text .stub${RELOCATING+ .text. .gnu.linkonce.t.*})
303	KEEP ((.text.personality*))
304	/* .gnu.warning sections are handled specially by elf32.em. */
305	*(.gnu.warning)
306	${RELOCATING+${OTHER_TEXT_SECTIONS}}
307	} =${NOP-0}
308	.fini ${RELOCATING-0} :
309	{
310	${RELOCATING+${FINI_START}}
311	KEEP (*(.fini))
312	${RELOCATING+${FINI_END}}
313	} =${NOP-0}
314	${RELOCATING+PROVIDE (__etext = .);}
315	${RELOCATING+PROVIDE (_etext = .);}
316	${RELOCATING+PROVIDE (etext = .);}
317	${WRITABLE_RODATA-${RODATA}}
318	.rodata1 ${RELOCATING-0} : { *(.rodata1) }
319	${CREATE_SHLIB-${SDATA2}}
320	${CREATE_SHLIB-${SBSS2}}
321	${OTHER_READONLY_SECTIONS}
322	.eh_frame_hdr : { *(.eh_frame_hdr) }
323	.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
324	.gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP ((.gcc_except_table)) (.gcc_except_table.*) }
325
326	/* Adjust the address for the data segment. We want to adjust up to
327	the same address within the page on the next page up. */
328	${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
329	${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
330	${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
331
332	/* Exception handling */
333	.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
334	.gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP ((.gcc_except_table)) (.gcc_except_table.*) }
335
336	/* Thread Local Storage sections */
337	.tdata ${RELOCATING-0} : { (.tdata${RELOCATING+ .tdata. .gnu.linkonce.td.*}) }
338	.tbss ${RELOCATING-0} : { (.tbss${RELOCATING+ .tbss. .gnu.linkonce.tb.})${RELOCATING+ (.tcommon)} }
339
340	.preinit_array ${RELOCATING-0} : { KEEP (*(.preinit_array)) }
341	.init_array ${RELOCATING-0} : { KEEP (*(.init_array)) }
342	.fini_array ${RELOCATING-0} : { KEEP (*(.fini_array)) }
343
344	${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
345	${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
346	.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
347
348	${RELOCATING+${DATARELRO}}
349	${OTHER_RELRO_SECTIONS}
350	${TEXT_DYNAMIC-${DYNAMIC}}
351	${NO_SMALL_DATA+${RELRO_NOW+${GOT}}}
352	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
353	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT+${GOTPLT}}}}
354	${RELOCATING+${DATA_SEGMENT_RELRO_END}}
355	${NO_SMALL_DATA+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
356
357	${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
358
359	.data ${RELOCATING-0} :
360	{
361	${RELOCATING+${DATA_START_SYMBOLS}}
362	(.data${RELOCATING+ .data. .gnu.linkonce.d.*})
363	KEEP ((.gnu.linkonce.d.personality*))
364	${CONSTRUCTING+SORT(CONSTRUCTORS)}
365	}
366	.data1 ${RELOCATING-0} : { *(.data1) }
367	${WRITABLE_RODATA+${RODATA}}
368	${OTHER_READWRITE_SECTIONS}
369	${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
370	${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
371	${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
372	${RELOCATING+${OTHER_GOT_SYMBOLS}}
373	${NO_SMALL_DATA-${GOT}}
374	${OTHER_GOT_SECTIONS}
375	${SDATA}
376	${OTHER_SDATA_SECTIONS}
377	${RELOCATING+_edata = .;}
378	${RELOCATING+PROVIDE (edata = .);}
379	${RELOCATING+__bss_start = .;}
380	${RELOCATING+${OTHER_BSS_SYMBOLS}}
381	${SBSS}
382	${BSS_PLT+${PLT}}
383	.bss ${RELOCATING-0} :
384	{
385	*(.dynbss)
386	(.bss${RELOCATING+ .bss. .gnu.linkonce.b.*})
387	*(COMMON)
388	/* Align here to ensure that the .bss section occupies space up to
389	_end. Align after .bss to ensure correct alignment even if the
390	.bss section disappears because there are no input sections. */
391	${RELOCATING+. = ALIGN(${ALIGNMENT});}
392	}
393	${OTHER_BSS_SECTIONS}
394	${RELOCATING+. = ALIGN(${ALIGNMENT});}
395	${RELOCATING+_end = .;}
396	${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
397	${RELOCATING+PROVIDE (end = .);}
398	${RELOCATING+${DATA_SEGMENT_END}}
399
400	/* Stabs debugging sections. */
401	.stab 0 : { *(.stab) }
402	.stabstr 0 : { *(.stabstr) }
403	.stab.excl 0 : { *(.stab.excl) }
404	.stab.exclstr 0 : { *(.stab.exclstr) }
405	.stab.index 0 : { *(.stab.index) }
406	.stab.indexstr 0 : { *(.stab.indexstr) }
407
408	.comment 0 : { *(.comment) }
409
410	/* DWARF debug sections.
411	Symbols in the DWARF debugging sections are relative to the beginning
412	of the section so we begin them at 0. */
413
414	/* DWARF 1 */
415	.debug 0 : { *(.debug) }
416	.line 0 : { *(.line) }
417
418	/* GNU DWARF 1 extensions */
419	.debug_srcinfo 0 : { *(.debug_srcinfo) }
420	.debug_sfnames 0 : { *(.debug_sfnames) }
421
422	/* DWARF 1.1 and DWARF 2 */
423	.debug_aranges 0 : { *(.debug_aranges) }
424	.debug_pubnames 0 : { *(.debug_pubnames) }
425
426	/* DWARF 2 */
427	.debug_info 0 : { (.debug_info .gnu.linkonce.wi.) }
428	.debug_abbrev 0 : { *(.debug_abbrev) }
429	.debug_line 0 : { *(.debug_line) }
430	.debug_frame 0 : { *(.debug_frame) }
431	.debug_str 0 : { *(.debug_str) }
432	.debug_loc 0 : { *(.debug_loc) }
433	.debug_macinfo 0 : { *(.debug_macinfo) }
434
435	/* SGI/MIPS DWARF 2 extensions */
436	.debug_weaknames 0 : { *(.debug_weaknames) }
437	.debug_funcnames 0 : { *(.debug_funcnames) }
438	.debug_typenames 0 : { *(.debug_typenames) }
439	.debug_varnames 0 : { *(.debug_varnames) }
440
441	${STACK_ADDR+${STACK}}
442	${OTHER_SECTIONS}
443	${RELOCATING+${OTHER_END_SYMBOLS}}
1c68693b	444	${RELOCATING+${DISCARDED}}
19d9b7d3 DB	445	}
19d9b7d3 DB	446	EOF