[deliverable/binutils-gdb.git] / libiberty / Makefile.in

#
# Makefile
#   Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 1998
#   Free Software Foundation
#
# This file is part of the libiberty library.
# Libiberty is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; either
# version 2 of the License, or (at your option) any later version.
#
# Libiberty is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public
# License along with libiberty; see the file COPYING.LIB.  If not,
# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
# Boston, MA 02111-1307, USA.
#

# This file was written by K. Richard Pixley <rich@cygnus.com>.

#
# Makefile for libiberty directory
#

srcdir = @srcdir@
VPATH = @srcdir@

prefix = @prefix@

exec_prefix = @exec_prefix@
bindir = @bindir@
libdir = @libdir@

SHELL = @SHELL@

# Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTIDIRS =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@

AR = @AR@
AR_FLAGS = rc

CC = @CC@
CFLAGS = @CFLAGS@
LIBCFLAGS = $(CFLAGS)
RANLIB = @RANLIB@

PICFLAG =

MAKEOVERRIDES =

TARGETLIB = libiberty.a

LIBOBJS = @LIBOBJS@
ALLOCA = @ALLOCA@

# A configuration can specify extra .o files that should be included,
# even if they are in libc. (Perhaps the libc version is buggy.)
EXTRA_OFILES = 

# Flags to pass to a recursive make.
FLAGS_TO_PASS = \
	"AR=$(AR)" \
	"AR_FLAGS=$(AR_FLAGS)" \
	"CC=$(CC)" \
	"CFLAGS=$(CFLAGS)" \
	"LIBCFLAGS=$(LIBCFLAGS)" \
	"EXTRA_OFILES=$(EXTRA_OFILES)" \
	"HDEFINES=$(HDEFINES)" \
	"INSTALL=$(INSTALL)" \
	"INSTALL_DATA=$(INSTALL_DATA)" \
	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
	"LDFLAGS=$(LDFLAGS)" \
	"LOADLIBES=$(LOADLIBES)" \
	"RANLIB=$(RANLIB)" \
	"SHELL=$(SHELL)"

all: stamp-picdir $(TARGETLIB) needed-list required-list
	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all

.PHONY: check installcheck
check installcheck:

@host_makefile_frag@

INCDIR=$(srcdir)/$(MULTISRCTOP)../include

COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES)
.c.o:
	test x"$(enable_shared)" != xyes || \
	  $(COMPILE.c) $(PICFLAG) $< -o pic/$@
	$(COMPILE.c) $<

info install-info clean-info dvi:

# Include files that are in this directory.
HFILES = alloca-conf.h

# NOTE: If you add new files to the library, add them to this list
# (alphabetical), and add them to REQUIRED_OFILES or funcs in
# configure.in.
CFILES = asprintf.c alloca.c argv.c atexit.c basename.c bcmp.c bcopy.c \
	bzero.c choose-temp.c clock.c concat.c cplus-dem.c fdmatch.c \
	fnmatch.c getcwd.c getopt.c getopt1.c getpagesize.c \
	getruntime.c floatformat.c hex.c index.c insque.c memchr.c \
	memcmp.c memcpy.c memmove.c memset.c mkstemps.c objalloc.c obstack.c \
	pexecute.c random.c rename.c rindex.c sigsetmask.c spaces.c \
	splay-tree.c strcasecmp.c strncasecmp.c strchr.c strdup.c strerror.c \
	strrchr.c strsignal.c strstr.c strtod.c strtol.c strtoul.c \
	tmpnam.c vasprintf.c vfork.c vfprintf.c vprintf.c vsprintf.c \
	waitpid.c xatexit.c xexit.c xmalloc.c xstrdup.c xstrerror.c

# These are always included in the library.
REQUIRED_OFILES = argv.o choose-temp.o concat.o cplus-dem.o \
  fdmatch.o fnmatch.o getopt.o getopt1.o getruntime.o hex.o \
  floatformat.o objalloc.o obstack.o pexecute.o spaces.o \
  splay-tree.o strerror.o strsignal.o xatexit.o xexit.o xmalloc.o \
  xstrdup.o xstrerror.o

$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
	rm -f $(TARGETLIB)
	$(AR) $(AR_FLAGS) $(TARGETLIB) \
	  $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
	$(RANLIB) $(TARGETLIB)

INSTALL_DEST = @INSTALL_DEST@
install: install_to_$(INSTALL_DEST)

install_to_libdir: all
	$(INSTALL_DATA) $(TARGETLIB) $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n
	( cd $(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
	mv -f $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n $(libdir)$(MULTISUBDIR)/$(TARGETLIB)
	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install

install_to_tooldir: all
	$(INSTALL_DATA) $(TARGETLIB) $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n
	( cd $(tooldir)/lib$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
	mv -f $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)
	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install

# needed-list is used by libstdc++.
needed-list: Makefile
	f="$(LIBOBJS) $(ALLOCA) $(EXTRA_OFILES)"; \
	case $$f in \
	  *alloca.o*) f="$$f xmalloc.o xexit.o" ;; \
	esac; \
	echo $$f > needed-list

# required-list was used when building a shared bfd/opcodes/libiberty
# library.  I don't know if it used by anything currently.
required-list: Makefile
	echo $(REQUIRED_OFILES) > required-list

stamp-picdir:
	if [ x"$(enable_shared)" = xyes ] && [ ! -d pic ]; then \
	  mkdir pic; \
	else true; fi
	touch stamp-picdir

.PHONY: all etags tags ls clean stage1 stage2

etags tags: TAGS

TAGS: $(CFILES) $(HFILES)
	etags `for i in $(HFILES) $(CFILES); do echo $(srcdir)/$$i ; done`

# The standalone demangler (c++filt) has been moved to binutils.
demangle:
	@echo "The standalone demangler, now named c++filt, is now"
	@echo "a part of binutils."
	@false

ls:
	@echo Makefile $(HFILES) $(CFILES)

# Need to deal with profiled libraries, too.

mostlyclean:
	rm -rf *.o pic core errs \#* *.E a.out
	rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
	rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
	@$(MULTICLEAN) multi-clean DO=mostlyclean
clean: mostlyclean
	rm -f *.a required-list tmpmulti.out
	@$(MULTICLEAN) multi-clean DO=clean
distclean: clean
	@$(MULTICLEAN) multi-clean DO=distclean
	rm -f *~ Makefile config.status xhost-mkfrag TAGS multilib.out
	rm -f config.log
maintainer-clean realclean: distclean

force:

Makefile: $(srcdir)/Makefile.in config.status
	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status

config.h: stamp-h ; @true
stamp-h: config.in config.status
	CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status

config.status: $(srcdir)/configure $(srcdir)/config.table
	$(SHELL) ./config.status --recheck

$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA): stamp-picdir

alloca.o: config.h
atexit.o: config.h
argv.o: config.h alloca-conf.h $(INCDIR)/libiberty.h
basename.o: $(INCDIR)/libiberty.h
choose-temp.o: config.h
clock.o: config.h
concat.o: $(INCDIR)/libiberty.h
cplus-dem.o: config.h $(INCDIR)/demangle.h
fdmatch.o: $(INCDIR)/libiberty.h
fnmatch.o: config.h $(INCDIR)/fnmatch.h
getcwd.o: config.h
getopt.o: config.h $(INCDIR)/getopt.h
getopt1.o: config.h $(INCDIR)/getopt.h
getpagesize.o: config.h
getruntime.o: config.h $(INCDIR)/libiberty.h
hex.o: $(INCDIR)/libiberty.h
floatformat.o: $(INCDIR)/floatformat.h
mkstemps.o: config.h
objalloc.o: $(INCDIR)/objalloc.h
obstack.o: config.h $(INCDIR)/obstack.h
pexecute.o: config.h $(INCDIR)/libiberty.h
spaces.o: $(INCDIR)/libiberty.h
splay-tree.o: config.h $(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h $(INCDIR)/ansidecl.h
strerror.o: config.h $(INCDIR)/libiberty.h
strsignal.o: config.h $(INCDIR)/libiberty.h
xatexit.o: $(INCDIR)/libiberty.h
xexit.o: $(INCDIR)/libiberty.h
xmalloc.o: $(INCDIR)/libiberty.h
xstrdup.o: config.h $(INCDIR)/libiberty.h
xstrerror.o: config.h $(INCDIR)/libiberty.h
Commit	Line	Data
252b5132 RH	1	#
	2	# Makefile
	3	# Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 1998
	4	# Free Software Foundation
	5	#
	6	# This file is part of the libiberty library.
	7	# Libiberty is free software; you can redistribute it and/or
	8	# modify it under the terms of the GNU Library General Public
	9	# License as published by the Free Software Foundation; either
	10	# version 2 of the License, or (at your option) any later version.
	11	#
	12	# Libiberty is distributed in the hope that it will be useful,
	13	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	15	# Library General Public License for more details.
	16	#
	17	# You should have received a copy of the GNU Library General Public
	18	# License along with libiberty; see the file COPYING.LIB. If not,
	19	# write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
	20	# Boston, MA 02111-1307, USA.
	21	#
	22
	23	# This file was written by K. Richard Pixley <rich@cygnus.com>.
	24
	25	#
	26	# Makefile for libiberty directory
	27	#
	28
	29	srcdir = @srcdir@
	30	VPATH = @srcdir@
	31
	32	prefix = @prefix@
	33
	34	exec_prefix = @exec_prefix@
	35	bindir = @bindir@
	36	libdir = @libdir@
	37
	38	SHELL = @SHELL@
	39
	40	# Multilib support variables.
	41	MULTISRCTOP =
	42	MULTIBUILDTOP =
	43	MULTIDIRS =
	44	MULTISUBDIR =
	45	MULTIDO = true
	46	MULTICLEAN = true
	47
	48	INSTALL = @INSTALL@
	49	INSTALL_PROGRAM = @INSTALL_PROGRAM@
	50	INSTALL_DATA = @INSTALL_DATA@
	51
	52	AR = @AR@
	53	AR_FLAGS = rc
	54
	55	CC = @CC@
	56	CFLAGS = @CFLAGS@
	57	LIBCFLAGS = $(CFLAGS)
	58	RANLIB = @RANLIB@
	59
	60	PICFLAG =
	61
	62	MAKEOVERRIDES =
	63
	64	TARGETLIB = libiberty.a
65
66	LIBOBJS = @LIBOBJS@
67	ALLOCA = @ALLOCA@
68
69	# A configuration can specify extra .o files that should be included,
70	# even if they are in libc. (Perhaps the libc version is buggy.)
71	EXTRA_OFILES =
72
73	# Flags to pass to a recursive make.
74	FLAGS_TO_PASS = \
75	"AR=$(AR)" \
76	"AR_FLAGS=$(AR_FLAGS)" \
77	"CC=$(CC)" \
78	"CFLAGS=$(CFLAGS)" \
79	"LIBCFLAGS=$(LIBCFLAGS)" \
80	"EXTRA_OFILES=$(EXTRA_OFILES)" \
81	"HDEFINES=$(HDEFINES)" \
82	"INSTALL=$(INSTALL)" \
83	"INSTALL_DATA=$(INSTALL_DATA)" \
84	"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
85	"LDFLAGS=$(LDFLAGS)" \
86	"LOADLIBES=$(LOADLIBES)" \
87	"RANLIB=$(RANLIB)" \
88	"SHELL=$(SHELL)"
89
90	all: stamp-picdir $(TARGETLIB) needed-list required-list
91	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=all
92
93	.PHONY: check installcheck
94	check installcheck:
95
96	@host_makefile_frag@
97
98	INCDIR=$(srcdir)/$(MULTISRCTOP)../include
99
100	COMPILE.c = $(CC) -c @DEFS@ $(LIBCFLAGS) -I. -I$(INCDIR) $(HDEFINES)
101	.c.o:
102	test x"$(enable_shared)" != xyes \|\| \
103	$(COMPILE.c) $(PICFLAG) $< -o pic/$@
104	$(COMPILE.c) $<
105
106	info install-info clean-info dvi:
107
108	# Include files that are in this directory.
109	HFILES = alloca-conf.h
110
111	# NOTE: If you add new files to the library, add them to this list
112	# (alphabetical), and add them to REQUIRED_OFILES or funcs in
113	# configure.in.
114	CFILES = asprintf.c alloca.c argv.c atexit.c basename.c bcmp.c bcopy.c \
115	bzero.c choose-temp.c clock.c concat.c cplus-dem.c fdmatch.c \
116	fnmatch.c getcwd.c getopt.c getopt1.c getpagesize.c \
117	getruntime.c floatformat.c hex.c index.c insque.c memchr.c \
118	memcmp.c memcpy.c memmove.c memset.c mkstemps.c objalloc.c obstack.c \
119	pexecute.c random.c rename.c rindex.c sigsetmask.c spaces.c \
120	splay-tree.c strcasecmp.c strncasecmp.c strchr.c strdup.c strerror.c \
121	strrchr.c strsignal.c strstr.c strtod.c strtol.c strtoul.c \
122	tmpnam.c vasprintf.c vfork.c vfprintf.c vprintf.c vsprintf.c \
123	waitpid.c xatexit.c xexit.c xmalloc.c xstrdup.c xstrerror.c
124
125	# These are always included in the library.
126	REQUIRED_OFILES = argv.o choose-temp.o concat.o cplus-dem.o \
127	fdmatch.o fnmatch.o getopt.o getopt1.o getruntime.o hex.o \
128	floatformat.o objalloc.o obstack.o pexecute.o spaces.o \
129	splay-tree.o strerror.o strsignal.o xatexit.o xexit.o xmalloc.o \
130	xstrdup.o xstrerror.o
131
132	$(TARGETLIB): $(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
133	rm -f $(TARGETLIB)
134	$(AR) $(AR_FLAGS) $(TARGETLIB) \
135	$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA)
136	$(RANLIB) $(TARGETLIB)
137
138	INSTALL_DEST = @INSTALL_DEST@
139	install: install_to_$(INSTALL_DEST)
140
141	install_to_libdir: all
142	$(INSTALL_DATA) $(TARGETLIB) $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n
143	( cd $(libdir)$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
144	mv -f $(libdir)$(MULTISUBDIR)/$(TARGETLIB).n $(libdir)$(MULTISUBDIR)/$(TARGETLIB)
145	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
146
147	install_to_tooldir: all
148	$(INSTALL_DATA) $(TARGETLIB) $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n
149	( cd $(tooldir)/lib$(MULTISUBDIR) ; $(RANLIB) $(TARGETLIB).n )
150	mv -f $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB).n $(tooldir)/lib$(MULTISUBDIR)/$(TARGETLIB)
151	@$(MULTIDO) $(FLAGS_TO_PASS) multi-do DO=install
152
153	# needed-list is used by libstdc++.
154	needed-list: Makefile
155	f="$(LIBOBJS) $(ALLOCA) $(EXTRA_OFILES)"; \
156	case $$f in \
157	alloca.o) f="$$f xmalloc.o xexit.o" ;; \
158	esac; \
159	echo $$f > needed-list
160
161	# required-list was used when building a shared bfd/opcodes/libiberty
162	# library. I don't know if it used by anything currently.
163	required-list: Makefile
164	echo $(REQUIRED_OFILES) > required-list
165
166	stamp-picdir:
167	if [ x"$(enable_shared)" = xyes ] && [ ! -d pic ]; then \
168	mkdir pic; \
169	else true; fi
170	touch stamp-picdir
171
172	.PHONY: all etags tags ls clean stage1 stage2
173
174	etags tags: TAGS
175
176	TAGS: $(CFILES) $(HFILES)
177	etags `for i in $(HFILES) $(CFILES); do echo $(srcdir)/$$i ; done`
178
179	# The standalone demangler (c++filt) has been moved to binutils.
180	demangle:
181	@echo "The standalone demangler, now named c++filt, is now"
182	@echo "a part of binutils."
183	@false
184
185	ls:
186	@echo Makefile $(HFILES) $(CFILES)
187
188	# Need to deal with profiled libraries, too.
189
190	mostlyclean:
191	rm -rf .o pic core errs \# *.E a.out
192	rm -f needed.awk needed2.awk errors dummy needed-list config.h stamp-*
193	rm -f $(CONFIG_H) $(NEEDED_LIST) stamp-picdir
194	@$(MULTICLEAN) multi-clean DO=mostlyclean
195	clean: mostlyclean
196	rm -f *.a required-list tmpmulti.out
197	@$(MULTICLEAN) multi-clean DO=clean
198	distclean: clean
199	@$(MULTICLEAN) multi-clean DO=distclean
200	rm -f *~ Makefile config.status xhost-mkfrag TAGS multilib.out
201	rm -f config.log
202	maintainer-clean realclean: distclean
203
204	force:
205
206	Makefile: $(srcdir)/Makefile.in config.status
207	CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status
208
209	config.h: stamp-h ; @true
210	stamp-h: config.in config.status
211	CONFIG_FILES= CONFIG_HEADERS=config.h:config.in $(SHELL) ./config.status
212
213	config.status: $(srcdir)/configure $(srcdir)/config.table
214	$(SHELL) ./config.status --recheck
215
216	$(REQUIRED_OFILES) $(EXTRA_OFILES) $(LIBOBJS) $(ALLOCA): stamp-picdir
217
218	alloca.o: config.h
219	atexit.o: config.h
220	argv.o: config.h alloca-conf.h $(INCDIR)/libiberty.h
221	basename.o: $(INCDIR)/libiberty.h
222	choose-temp.o: config.h
223	clock.o: config.h
224	concat.o: $(INCDIR)/libiberty.h
225	cplus-dem.o: config.h $(INCDIR)/demangle.h
226	fdmatch.o: $(INCDIR)/libiberty.h
227	fnmatch.o: config.h $(INCDIR)/fnmatch.h
228	getcwd.o: config.h
229	getopt.o: config.h $(INCDIR)/getopt.h
230	getopt1.o: config.h $(INCDIR)/getopt.h
231	getpagesize.o: config.h
232	getruntime.o: config.h $(INCDIR)/libiberty.h
233	hex.o: $(INCDIR)/libiberty.h
234	floatformat.o: $(INCDIR)/floatformat.h
235	mkstemps.o: config.h
236	objalloc.o: $(INCDIR)/objalloc.h
237	obstack.o: config.h $(INCDIR)/obstack.h
238	pexecute.o: config.h $(INCDIR)/libiberty.h
239	spaces.o: $(INCDIR)/libiberty.h
240	splay-tree.o: config.h $(INCDIR)/libiberty.h $(INCDIR)/splay-tree.h $(INCDIR)/ansidecl.h
241	strerror.o: config.h $(INCDIR)/libiberty.h
242	strsignal.o: config.h $(INCDIR)/libiberty.h
243	xatexit.o: $(INCDIR)/libiberty.h
244	xexit.o: $(INCDIR)/libiberty.h
245	xmalloc.o: $(INCDIR)/libiberty.h
246	xstrdup.o: config.h $(INCDIR)/libiberty.h
247	xstrerror.o: config.h $(INCDIR)/libiberty.h