[deliverable/binutils-gdb.git] / opcodes / ChangeLog

2006-12-15  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (o_mode): New for 16-byte operand.
	(intel_operand_size): Generate "OWORD PTR " for o_mode.
	(CMPXCHG8B_Fixup): Set bytemode to o_mode instead of x_mode.

2006-12-14  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (CMPXCHG8B_Fixup): New.
	(grps): Use CMPXCHG8B_Fixup for cmpxchg8b.

2006-12-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (Eq): Replaced by ...
	(Mq): New. This.
	(Ma): Defined with OP_M instead of OP_E.
	(grps): Updated cmpxchg8b and vmptrst for Eq -> Mq.
	(OP_M): Added bound, cmpxchg8b and vmptrst to bad modrm list.

2006-12-11  Daniel Jacobowitz  <dan@codesourcery.com>

	* po/Make-in (.po.gmo): Put gmo files in objdir.

2006-12-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (X86_64_1): New.
	(X86_64_2): Likewise.
	(X86_64_3): Likewise.
	(dis386): Replace 0x60, 0x61 and 0x62 entries with x86-64
	tables.
	(x86_64_table): Add entries for 0x60, 0x61 and 0x62.

2006-12-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c: Adjust white spaces.

2006-12-04  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (OP_J): Update used_prefixes in v_mode.

2006-11-30  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (SEG_Fixup): Delete.
	(Sv): Use OP_SEG.
	(putop): New suffix character 'D'.
	(dis386): Use it.
	(grps): Likewise.
	(OP_SEG): Handle bytemode other than w_mode.

2006-11-30  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (zAX): New.
	(Xz): New.
	(Yzr): New.
	(z_mode): New.
	(z_mode_ax_reg): New.
	(putop): New suffix character 'G'.
	(dis386): Use it for in, out, ins, and outs.
	(intel_operand_size): Handle z_mode.
	(OP_REG): Delete unreachable case indir_dx_reg.
	(OP_IMREG): Fix Intel syntax output for case indir_dx_reg. Handle
	z_mode_ax_reg.
	(OP_ESreg): Fix Intel syntax operand size handling.
	(OP_DSreg): Likewise.

2006-11-30  Jan Beulich  <jbeulich@novell.com>

	* i386-dis.c (dis386): Use 'R' and 'O' for cbw/cwd unconditionally.
	(putop): For 'O' suffix, print 'q' in Intel mode, and mark data prefix
	used. For 'R' and 'W' suffix, simplify and fix Intel mode.

2006-11-29  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (coprocessor_opcodes): Fix bitfields for fconstd/fconstd.

2006-11-22  Daniel Jacobowitz  <dan@codesourcery.com>

	* arm-dis.c (last_is_thumb): Delete.
	(enum map_type, last_type): New.
	(print_insn_data): New.
	(get_sym_code_type): Take MAP_TYPE argument.  Check the type of
	the right symbol.  Handle $d.
	(print_insn): Check for mapping symbols even without a normal
	symbol.  Adjust searching.  If $d is found see how much data
	to print.  Handle data.

2006-11-16  Nathan Sidwell  <nathan@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Place trap instructions before set
	conditionals.  Add tpf coldfire instruction as alias for trapf.

2006-11-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (print_insn): Check PREFIX_REPNZ before
	PREFIX_DATA when prefix user table is used.

2006-11-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (twobyte_uses_SSE_prefix): Renamed to ...
	(twobyte_uses_DATA_prefix): This.
	(twobyte_uses_REPNZ_prefix): New.
	(twobyte_uses_REPZ_prefix): Likewise.
	(threebyte_0x38_uses_DATA_prefix): Likewise.
	(threebyte_0x38_uses_REPNZ_prefix): Likewise.
	(threebyte_0x38_uses_REPZ_prefix): Likewise.
	(threebyte_0x3a_uses_DATA_prefix): Likewise.
	(threebyte_0x3a_uses_REPNZ_prefix): Likewise.
	(threebyte_0x3a_uses_REPZ_prefix): Likewise.
	(print_insn): Updated checking usages of DATA/REPNZ/REPZ
	prefixes.

2006-11-06  Troy Rollo  <troy@corvu.com.au>

	* ppc-opc.c: Restore COM to mfcr wrongly removed 2003-07-04.

2006-11-01  Mei Ligang  <ligang@sunnorth.com.cn>

	* score-opc.h (score_opcodes): Delete modifier '0x'.

2006-10-30  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (last_is_thumb, last_mapping_sym, last_mapping_addr): New.
	(get_sym_code_type): New function.
	(print_insn): Search for mapping symbols.

2006-10-31  Mei Ligang  <ligang@sunnorth.com.cn>

	* score-dis.c (print_insn): Correct the error code to print
	correct PCE instruction disassembly.

2006-10-26  Ben Elliston  <bje@au.ibm.com>
	    Anton Blanchard  <anton@samba.org>
	    Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-opc.c (A_L, DCM, DGM, TE, RMC, R, SP, S, SH16, XRT_L, EH,
	AFRALFRC_MASK, Z, ZRC, Z_MASK, XLRT_MASK, XEH_MASK): Define.
	(POWER6): Define.
	(powerpc_opcodes): Extend "lwarx", "ldarx", "dcbf", "fres", "fres.",
	"frsqrtes", "frsqrtes." "fre", "fre.", "frsqrte" and "frsqrte.".
	Add "doze", "nap", "sleep", "rvwinkle", "dcbfl", "prtyw", "prtyd",
	"mfcfar", "cmpb", "lfdpx", "stfdpx", "mtcfar", "mffgpr", "mftgpr",
	"lwzcix", "lhzcix", "lbzcix", "ldcix", "lfiwax", "stwcix", "sthcix",
	"stbcix", "stdcix", "lfdp", "dadd", "dadd.", "dqua", "dqua.", "dmul",
	"dmul.", "drrnd", "drrnd.", "dscli", "dscli.", "dquai", "dquai.",
	"dscri", "dscri.", "drintx", "drintx.", "dcmpo", "dtstex", "dtstdc",
	"dtstdg", "dtstsf", "drintn", "drintn.", "dctdp", "dctdp.", "dctfix",
	"dctfix.", "ddedpd", "ddedpd.", "dxex", "dxex.", "dsub", "dsub.",
	"ddiv", "ddiv.", "dcmpu", "drsp", "drsp.", "dcffix", "dcffix.",
	"denbcd", "denbcd.", "diex", "diex.", "stfdp", "daddq", "daddq.",
	"dquaq", "dquaq.", "fcpsgn", "fcpsgn.", "dmulq", "dmulq.",
	"drrndq", "drrndq.", "dscliq", "dscliq.", "dquaiq", "dquaiq.",
	"dscriq", "dscriq.", "drintxq", "drintxq.", "dcmpoq", "dtstexq",
	"dtstdcq", "dtstdgq", "dtstsfq", "drintnq", "drintnq.",
	"dctqpq", "dctqpq.", "dctfixq", "dctfixq.", "ddedpdq", "ddedpdq.",
	"dxexq", "dxexq.", "dsubq", "dsubq.", "ddivq", "ddivq.", "dcmpuq",
	"drdpq", "drdpq.", "dcffixq", "dcffixq.", "denbcdq", "denbcdq.",
	"diexq" and "diexq." opcodes.

2006-10-26  Daniel Jacobowitz  <dan@codesourcery.com>

	* h8300-dis.c (bfd_h8_disassemble): Add missing consts.

2006-10-25  Trevor Smigiel  <Trevor_Smigiel@playstation.sony.com>
	    Yukishige Shibata  <shibata@rd.scei.sony.co.jp>
	    Nobuhisa Fujinami  <fnami@rd.scei.sony.co.jp>
	    Takeaki Fukuoka  <fukuoka@rd.scei.sony.co.jp>
	    Alan Modra  <amodra@bigpond.net.au>

	* spu-dis.c: New file.
	* spu-opc.c: New file.
	* configure.in: Add SPU support.
	* disassemble.c: Likewise.
	* Makefile.am: Likewise.  Run "make dep-am".
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.

2006-10-24  Andrew Pinski  <andrew_pinski@playstation.sony.com>

	* ppc-opc.c (CELL): New define.
	(powerpc_opcodes): Enable hrfid for Cell.  Add ldbrx and stdbrx,
	cell specific instructions.  Add {st,l}x{r,l}{,l} cell specific
	VMX instructions.
	* ppc-dis.c (powerpc_dialect): Handle cell.

2006-10-23  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>

	* i386-dis.c (dis386): Add support for the change in POPCNT opcode in 
	amdfam10 architecture.
	(PREGRP37): NEW.
	(print_insn): Disallow REP prefix for POPCNT.
	 
2006-10-20  Andrew Stubbs  <andrew.stubbs@st.com>

	* sh-dis.c (print_insn_sh): Remove 0x from output to prevent GDB
	duplicating it.

2006-10-18  Dave Brolley  <brolley@redhat.com>

	* configure.in (BFD_MACHINES): Add cgen-bitset.lo for bfd_sh_arch.
	* configure: Regenerated.

2006-09-29  Alan Modra  <amodra@bigpond.net.au>

	* po/POTFILES.in: Regenerate.

2006-09-26  Mark Shinwell  <shinwell@codesourcery.com>
            Joseph Myers  <joseph@codesourcery.com>
            Ian Lance Taylor  <ian@wasabisystems.com>
            Ben Elliston  <bje@wasabisystems.com>

	* arm-dis.c (coprocessor_opcodes): The X-qualifier to WMADD may
	only be used with the default multiply-add operation, so if N is
	set, don't bother printing X.  Add new iwmmxt instructions.
	(IWMMXT_INSN_COUNT): Update.
	(iwmmxt_wwssnames): Qualify "wwss" names at index 2, 6, 10 and 14
	with a 'c' suffix.
	(print_insn_coprocessor): Check for iWMMXt2.  Handle format
	specifiers 'r', 'i'.

2006-09-24  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>

	PR binutils/3100
	* i386-dis.c (prefix_user_table): Fix the second operand of
	maskmovdqu instruction to allow only %xmm register instead of
	both %xmm register and memory.

2006-09-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/3235
	* i386-dis.c (OP_OFF64): Get 32bit offset if there is an
	address size prefix.

2006-09-17  Mei Ligang  <ligang@sunnorth.com.cn>

	* score-dis.c: New file.
	* score-opc.h: New file.
	* Makefile.am: Add Score files.
	* Makefile.in: Regenerate.
	* configure.in: Add support for Score target.
	* configure: Regenerate.
	* disassemble.c: Add support for Score target.

2006-09-16  Nick Clifton  <nickc@redhat.com>
	    Pedro Alves  <pedro_alves@portugalmail.pt>

	* arm-dis.c: Make use of new STRING_COMMA_LEN and CONST_STRNEQ
	macros defined in bfd.h.
	* cris-dis.c: Likewise.
	* h8300-dis.c: Likewise.
	* i386-dis.c: Likewise.
	* ia64-gen.c: Likewise.
	* mips-dis: Likewise.

2006-09-04  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (neon_opcode): Fix suffix on VMOVN.

2006-08-23  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (three_byte_table): Expand to 256 elements.

2006-08-04  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>

	PR binutils/3000
	* i386-dis.c (MXC,EMC): Define.
	(OP_MXC): New function to handle cvt* (convert instructions) between
	%xmm and %mm register correctly.
	(OP_EMC): ditto.	
	(prefix_user_table): Modified cvtpi2pd,cvtpd2pi and cvttpd2pi 
	instruction operands in PREGRP2,PREGRP3,PREGRP4 appropriately 
	with EMC/MXC.

2006-07-29  Richard Sandiford  <richard@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Fix operand specificer in the Coldfire
	"fdaddl" entry.

2006-07-19  Paul Brook  <paul@codesourcery.com>

	* armd-dis.c (arm_opcodes): Fix rbit opcode.

2006-07-18  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (grps): Change "sldtQ", "strQ" and "smswQ" to
	"sldt", "str" and "smsw".

2006-07-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/2829
	* i386-dis.c (GRP11_C6): NEW.
	(GRP11_C7): Likewise.
	(GRP12): Updated.
	(GRP13): Likewise.
	(GRP14): Likewise.
	(GRP15): Likewise.
	(GRP16): Likewise.
	(GRPAMD): Likewise.
	(GRPPADLCK1): Likewise.
	(GRPPADLCK2): Likewise.
	(dis386): Use GRP11_C6 and GRP11_C7 for entres 0xc6 and 0xc7,
	respectively.
	(grps): Add entries for GRP11_C6 and GRP11_C7.

2006-07-10 Dwarakanath Rajagopal	<dwarak.rajagopal@amd.com>
	   Michael Meissner		<michael.meissner@amd.com>

	* i386-dis.c (dis386): Add support for 4 operand instructions. Add
	support for amdfam10 SSE4a/ABM instructions. Modify all
	initializer macros to have additional arguments. Disallow REP
	prefix for non-string instructions.
	(print_insn): Ditto.

2006-07-05  Julian Brown  <julian@codesourcery.com>

	* arm-dis.c (coprocessor): Alter fmsrr disassembly syntax.

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (dis386_twobyte): Use "nopQ" for 0x1f.
	(twobyte_has_modrm): Set 1 for 0x1f.

2006-06-12  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (NOP_Fixup): Removed.
	(NOP_Fixup1): New.
	(NOP_Fixup2): Likewise.
	(dis386): Use NOP_Fixup1 and NOP_Fixup2 on 0x90.

2006-06-12  Julian Brown  <julian@codesourcery.com>

	* arm-dis.c (print_insn_neon): Disassemble 32-bit immediates as signed
	on 64-bit hosts.

2006-06-10  H.J. Lu  <hongjiu.lu@intel.com>

	* i386.c (GRP10): Renamed to ...
	(GRP12): This.
	(GRP11): Renamed to ...
	(GRP13): This.
	(GRP12): Renamed to ...
	(GRP14): This.
	(GRP13): Renamed to ...
	(GRP15): This.
	(GRP14): Renamed to ...
	(GRP16): This.
	(dis386_twobyte): Updated.
	(grps): Likewise.

2006-06-09  Nick Clifton  <nickc@redhat.com>

	* po/fi.po: Updated Finnish translation.

2006-06-07  Joseph S. Myers  <joseph@codesourcery.com>

	* po/Make-in (pdf, ps): New dummy targets.

2006-06-06  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (coprocessor_opcodes): Add %c to unconditional arm
	instructions.
	(neon_opcodes): Add conditional execution specifiers.
	(thumb_opcodes): Ditto.
	(thumb32_opcodes): Ditto.
	(arm_conditional): Change 0xe to "al" and add "" to end.
	(ifthen_state, ifthen_next_state, ifthen_address): New.
	(IFTHEN_COND): Define.
	(print_insn_coprocessor, print_insn_neon): Print thumb conditions.
	(print_insn_arm): Change %c to use new values of arm_conditional.
	(print_insn_thumb16): Print thumb conditions.  Add %I.
	(print_insn_thumb32): Print thumb conditions.
	(find_ifthen_state): New function.
	(print_insn): Track IT block state.

2006-06-06  Ben Elliston  <bje@au.ibm.com>
	    Anton Blanchard  <anton@samba.org>
	    Peter Bergner  <bergner@vnet.ibm.com>

	* ppc-dis.c (powerpc_dialect): Handle power6 option.
	(print_ppc_disassembler_options): Mention power6.

2006-06-06  Thiemo Seufer  <ths@mips.com>
            Chao-ying Fu  <fu@mips.com>

	* mips-dis.c: Disassemble DSP64 instructions for MIPS64R2.
	* mips-opc.c: Add DSP64 instructions.

2006-06-06  Alan Modra  <amodra@bigpond.net.au>

	* m68hc11-dis.c (print_insn): Warning fix.

2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>

	* po/Make-in (top_builddir): Define.

2006-06-05  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.
	* config.in: Regenerate.

2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>

	* Makefile.am (INCLUDES): Use @INCINTL@.
	* acinclude.m4: Include new gettext macros.
	* configure.in: Use ZW_GNU_GETTEXT_SISTER_DIR and AM_PO_SUBDIRS.
	Remove local code for po/Makefile.
	* Makefile.in, aclocal.m4, configure: Regenerated.

2006-05-30  Nick Clifton  <nickc@redhat.com>

	* po/es.po: Updated Spanish translation.

2006-05-25  Richard Sandiford  <richard@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Fix the masks of the Coldfire fmovemd
	and fmovem entries.  Put register list entries before immediate
	mask entries.  Use "l" rather than "L" in the fmovem entries.
	* m68k-dis.c (match_insn_m68k): Remove the PRIV argument and work it
	out from INFO.
	(m68k_scan_mask): New function, split out from...
	(print_insn_m68k): ...here.  If no architecture has been set,
	first try printing an m680x0 instruction, then try a Coldfire one.

2006-05-24  Nick Clifton  <nickc@redhat.com>

	* po/ga.po: Updated Irish translation.

2006-05-22  Nick Clifton  <nickc@redhat.com>

	* crx-dis.c (EXTRACT): Make macro work on 64-bit hosts.

2006-05-22  Nick Clifton  <nickc@redhat.com>

	* po/nl.po: Updated translation.

2006-05-18  Alan Modra  <amodra@bigpond.net.au>

	* avr-dis.c: Formatting fix.

2006-05-14  Thiemo Seufer  <ths@mips.com>

	* mips16-opc.c (I1, I32, I64): New shortcut defines.
	(mips16_opcodes): Change membership of instructions to their
	lowest baseline ISA.

2006-05-09  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (grps): Update sgdt/sidt for 64bit.

2006-05-05  Julian Brown  <julian@codesourcery.com>

	* arm-dis.c (coprocessor_opcodes): Don't interpret fldmx/fstmx as
	vldm/vstm.

2006-05-05  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>

	* mips-opc.c: Add macro for cache instruction.

2006-05-04  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>
	    David Ung  <davidu@mips.com>

	* mips-dis.c (mips_arch_choices): Add smartmips instruction
	decoding to MIPS32 and MIPS32R2.  Limit DSP decoding to release
	2 ISAs.  Add MIPS3D decoding to MIPS32R2.  Add MT decoding to
	MIPS64R2.
	* mips-opc.c: fix random typos in comments.
	(INSN_SMARTMIPS): New defines.
	(mips_builtin_opcodes): Add paired single support for MIPS32R2.
	Move bc3f, bc3fl, bc3t, bc3tl downwards.  Move flushi, flushd,
	flushid, wb upwards.  Move cfc3, ctc3 downwards.  Rework the
	FP_S and FP_D flags to denote single and double register
	accesses separately.  Move dmfc3, dmtc3, mfc3, mtc3 downwards.
	Allow jr.hb and jalr.hb for release 1 ISAs.  Allow luxc1, suxc1
	for MIPS32R2.  Add SmartMIPS instructions.  Add two-argument
	variants of bc2f, bc2fl, bc2t, bc2tl.  Add mfhc2, mthc2 to
	release 2 ISAs.
	* mips16-opc.c (mips16_opcodes): Add sdbbp instruction.

2006-05-03  Thiemo Seufer  <ths@mips.com>

	* mips-opc.c (mips_builtin_opcodes): Fix mftr argument order.

2006-05-02  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>
            David Ung  <davidu@mips.com>

	* mips-dis.c (print_insn_args): Force mips16 to odd addresses.
	(print_mips16_insn_arg): Force mips16 to odd addresses.

2006-04-30  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>

	* mips-opc.c (mips_builtin_opcodes): Add udi instructions
	"udi0" to "udi15".
	* mips-dis.c (print_insn_args): Adds udi argument handling.

2006-04-28  James E Wilson  <wilson@specifix.com>

	* m68k-dis.c (match_insn_m68k): Restore fprintf_func before printing
	error message.

2006-04-28  Thiemo Seufer  <ths@mips.com>
            David Ung  <davidu@mips.com>
	    Nigel Stephens  <nigel@mips.com>

	* mips-dis.c (mips_cp0sel_names_mips3264r2): Add MT register
	names.

2006-04-28  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>
            David Ung  <davidu@mips.com>

	* mips-dis.c (print_insn_args): Add mips_opcode argument.
	(print_insn_mips):  Adjust print_insn_args call.

2006-04-28  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>

	* mips-dis.c (print_insn_args): Print $fcc only for FP
	instructions, use $cc elsewise.

2006-04-28  Thiemo Seufer  <ths@mips.com>
            Nigel Stephens  <nigel@mips.com>

	* opcodes/mips-dis.c (mips16_to_32_reg_map, mips16_reg_names):
	Map MIPS16 registers to O32 names.
	(print_mips16_insn_arg): Use mips16_reg_names.

2006-04-26  Julian Brown  <julian@codesourcery.com>

	* arm-dis.c (print_insn_neon): Disassemble floating-point constant
	VMOV.

2006-04-26  Nathan Sidwell  <nathan@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	* opcodes/arm-dis.c (coprocessor_opcodes): Add %A, %B, %k, convert
	%<code>[zy] into %[zy]<code>.  Expand meaning of %<bitfield>['`?].
	Add unified load/store instruction names.
	(neon_opcode_table): New.
	(arm_opcodes): Expand meaning of %<bitfield>['`?].
	(arm_decode_bitfield): New.
	(print_insn_coprocessor): Add pc argument. Add %A & %B specifiers.
	Use arm_decode_bitfield and adjust numeric specifiers. Adjust %z & %y.
	(print_insn_neon): New.
	(print_insn_arm): Adjust print_insn_coprocessor call. Call
	print_insn_neon. Use arm_decode_bitfield and adjust numeric specifiers.
	(print_insn_thumb32): Likewise.

2006-04-19  Alan Modra  <amodra@bigpond.net.au>

	* Makefile.am: Run "make dep-am".
	* Makefile.in: Regenerate.

2006-04-19  Alan Modra  <amodra@bigpond.net.au>

	* avr-dis.c (avr_operand): Warning fix.

	* configure: Regenerate.

2006-04-16  Daniel Jacobowitz  <dan@codesourcery.com>

	* po/POTFILES.in: Regenerated.

2006-04-12   Hochstein  <hochstein@algo.informatik.tu-darmstadt.de>

	PR binutils/2454
	* avr-dis.c (avr_operand): Arrange for a comment to appear before
	the symolic form of an address, so that the output of objdump -d
	can be reassembled.

2006-04-10  DJ Delorie  <dj@redhat.com>

	* m32c-asm.c: Regenerate.

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-html target.
	* Makefile.in: Regenerate.

2006-04-06  Nick Clifton  <nickc@redhat.com>

	* po/vi/po: Updated Vietnamese translation.

2006-03-31  Paul Koning  <ni1d@arrl.net>

	* pdp11-opc.c (pdp11_opcodes): Fix opcode for SEC instruction.

2006-03-16  Bernd Schmidt  <bernd.schmidt@analog.com>

	* bfin-dis.c (decode_dsp32shiftimm_0): Simplify and correct the
	logic to identify halfword shifts.

2006-03-16  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (arm_opcodes): Rename swi to svc.
	(thumb_opcodes): Ditto.

2006-03-13  DJ Delorie  <dj@redhat.com>

	* m32c-asm.c: Regenerate.
	* m32c-desc.c: Likewise.
	* m32c-desc.h: Likewise.
	* m32c-dis.c: Likewise.
	* m32c-ibld.c: Likewise.
	* m32c-opc.c: Likewise.
	* m32c-opc.h: Likewise.

2006-03-10  DJ Delorie  <dj@redhat.com>

	* m32c-desc.c: Regenerate with mul.l, mulu.l.
	* m32c-opc.c: Likewise.
	* m32c-opc.h: Likewise.


2006-03-09  Nick Clifton  <nickc@redhat.com>

	* po/sv.po: Updated Swedish translation.

2006-03-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR binutils/2428
	* i386-dis.c (REP_Fixup): New function.
	(AL): Remove duplicate.
	(Xbr): New.
	(Xvr): Likewise.
	(Ybr): Likewise.
	(Yvr): Likewise.
	(indirDXr): Likewise.
	(ALr): Likewise.
	(eAXr): Likewise.
	(dis386): Updated entries of ins, outs, movs, lods and stos.

2006-03-05  Nick Clifton  <nickc@redhat.com>

	* cgen-ibld.in (insert_normal): Cope with attempts to insert a
	signed 32-bit value into an unsigned 32-bit field when the host is
	a 64-bit machine.
	* fr30-ibld.c: Regenerate.
	* frv-ibld.c: Regenerate.
	* ip2k-ibld.c: Regenerate.
	* iq2000-asm.c: Regenerate.
	* iq2000-ibld.c: Regenerate.
	* m32c-ibld.c: Regenerate.
	* m32r-ibld.c: Regenerate.
	* openrisc-ibld.c: Regenerate.
	* xc16x-ibld.c: Regenerate.
	* xstormy16-ibld.c: Regenerate.

2006-03-03 Shrirang Khisti <shrirangk@kpitcummins.com)

	* xc16x-asm.c: Regenerate.
	* xc16x-dis.c: Regenerate.

2006-02-27  Carlos O'Donell  <carlos@codesourcery.com>

	* po/Make-in: Add html target.

2006-02-27  H.J. Lu <hongjiu.lu@intel.com>

	* i386-dis.c (IS_3BYTE_OPCODE): New for 3-byte opcodes used by
	Intel Merom New Instructions.
	(THREE_BYTE_0): Likewise.
	(THREE_BYTE_1): Likewise.
	(three_byte_table): Likewise.
	(dis386_twobyte): Use THREE_BYTE_0 for entry 0x38. Use
	THREE_BYTE_1 for entry 0x3a.
	(twobyte_has_modrm): Updated.
	(twobyte_uses_SSE_prefix): Likewise.
	(print_insn): Handle 3-byte opcodes used by Intel Merom New
	Instructions.

2006-02-24  David S. Miller  <davem@sunset.davemloft.net>

	* sparc-dis.c (v9_priv_reg_names): Add "gl" entry.
	(v9_hpriv_reg_names): New table.
	(print_insn_sparc): Allow values up to 16 for '?' and '!'.
	New cases '$' and '%' for read/write hyperprivileged register.
	* sparc-opc.c (sparc_opcodes): Add new entries for UA2005
	window handling and rdhpr/wrhpr instructions.
	
2006-02-24  DJ Delorie  <dj@redhat.com>

	* m32c-desc.c: Regenerate with linker relaxation attributes.
	* m32c-desc.h: Likewise.
	* m32c-dis.c: Likewise.
	* m32c-opc.c: Likewise.

2006-02-24  Paul Brook  <paul@codesourcery.com>

	* arm-dis.c (arm_opcodes): Add V7 instructions.
	(thumb32_opcodes): Ditto.  Handle V7M MSR/MRS variants.
	(print_arm_address): New function.
	(print_insn_arm): Use it.  Add 'P' and 'U' cases.
	(psr_name): New function.
	(print_insn_thumb32): Add 'U', 'C' and 'D' cases.

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64-opc-i.c (bXc): New.
	(mXc): Likewise.
	(OpX2TaTbYaXcC): Likewise.
	(TF). Likewise.
	(TFCM). Likewise.
	(ia64_opcodes_i): Add instructions for tf.

	* ia64-opc.h (IMMU5b): New.

	* ia64-asmtab.c: Regenerated.

2006-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64-gen.c: Update copyright years.
	* ia64-opc-b.c: Likewise.

2006-02-22  H.J. Lu  <hongjiu.lu@intel.com>

	* ia64-gen.c (lookup_regindex): Handle ".vm".
	(print_dependency_table): Handle '\"'.

	* ia64-ic.tbl: Updated from SDM 2.2.
	* ia64-raw.tbl: Likewise.
	* ia64-waw.tbl: Likewise.
	* ia64-asmtab.c: Regenerated.

	* ia64-opc-b.c (ia64_opcodes_b): Add vmsw.0 and vmsw.1.

2006-02-17  Shrirang Khisti  <shrirangk@kpitcummins.com>
            Anil Paranjape   <anilp1@kpitcummins.com>
            Shilin Shakti    <shilins@kpitcummins.com>

	* xc16x-desc.h: New file
	* xc16x-desc.c: New file
	* xc16x-opc.h: New file	
	* xc16x-opc.c: New file
	* xc16x-ibld.c: New file
	* xc16x-asm.c: New file
	* xc16x-dis.c: New file
	* Makefile.am: Entries for xc16x 
	* Makefile.in: Regenerate 
	* cofigure.in: Add xc16x target information.
	* configure: Regenerate.
	* disassemble.c: Add xc16x target information.

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c (dis386_twobyte): Use "movZ" for debug register
	moves.

2006-02-11  H.J. Lu  <hongjiu.lu@intel.com>

	* i386-dis.c ('Z'): Add a new macro.
	(dis386_twobyte): Use "movZ" for control register moves.

2006-02-10  Nick Clifton  <nickc@redhat.com>

	* iq2000-asm.c: Regenerate.

2006-02-07  Nathan Sidwell  <nathan@codesourcery.com>

	* m68k-dis.c (print_insn_m68k): Use bfd_m68k_mach_to_features.

2006-01-26  David Ung  <davidu@mips.com>

	* mips-opc.c: Add I33 masks to these MIPS32R2 instructions: prefx,
	ceil.l.d, ceil.l.s, cvt.d.l, cvt.l.d, cvt.l.s, cvt.s.l, floor.l.d,
	floor.l.s, ldxc1, lwxc1, madd.d, madd.s, msub.d, msub.s, nmadd.d,
	nmadd.s, nmsub.d, nmsub.s, recip.d, recip.s, round.l.d, rsqrt.d,
	rsqrt.s, sdxc1, swxc1, trunc.l.d, trunc.l.s.

2006-01-18  Arnold Metselaar  <arnoldm@sourceware.org>

	* z80-dis.c (struct buffer, prt_d, prt_d_n, arit_d, ld_r_d,
	ld_d_r, pref_xd_cb): Use signed char to hold data to be
	disassembled.	
	* z80-dis.c (TXTSIZ): Increase buffer size to 24, this fixes
	buffer overflows when disassembling instructions like
	ld (ix+123),0x23
	* z80-dis.c (opc_ind, pref_xd_cb): Suppress '+' in an indexed
	operand, if the offset is negative.

2006-01-17  Arnold Metselaar  <arnoldm@sourceware.org>

	* z80-dis.c (struct buffer, prt_d, prt_d_n, pref_xd_cb): Use
	unsigned char to hold data to be disassembled.

2006-01-17  Andreas Schwab  <schwab@suse.de>

	PR binutils/1486
	* disassemble.c (disassemble_init_for_target): Set
	disassembler_needs_relocs for bfd_arch_arm.

2006-01-16  Paul Brook  <paul@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Fix opcodes for ColdFire f?abss,
	f?add?, and f?sub? instructions.

2006-01-16  Nick Clifton  <nickc@redhat.com>

	* po/zh_CN.po: New Chinese (simplified) translation.
	* configure.in (ALL_LINGUAS): Add "zh_CH".
	* configure: Regenerate.

2006-01-05  Paul Brook  <paul@codesourcery.com>

	* m68k-opc.c (m68k_opcodes): Add missing ColdFire fdsqrtd entry.

2006-01-06  DJ Delorie  <dj@redhat.com>

	* m32c-desc.c: Regenerate.
	* m32c-opc.c: Regenerate.
	* m32c-opc.h: Regenerate.

2006-01-03  DJ Delorie  <dj@redhat.com>

	* cgen-ibld.in (extract_normal): Avoid memory range errors.
	* m32c-ibld.c: Regenerated.

For older changes see ChangeLog-2005
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: