2004-08-30 Nathanael Nerode <neroden@gcc.gnu.org>

[deliverable/binutils-gdb.git] / opcodes / ChangeLog

2004-08-27  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.[ch], frv-opc.[ch]: Regenerated.

2004-07-30  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1
	(GRPPADLCK2): New define.
	(twobyte_has_modrm): True for 0xA6.
	(grps): GRPPADLCK2 for opcode 0xA6.

2004-07-29  Alexandre Oliva  <aoliva@redhat.com>

	Introduce SH2a support.
	* sh-opc.h (arch_sh2a_base): Renumber.
	(arch_sh2a_nofpu_base): Remove.
	(arch_sh_base_mask): Adjust.
	(arch_opann_mask): New.
	(arch_sh2a, arch_sh2a_nofpu): Adjust.
	(arch_sh2a_up, arch_sh2a_nofpu_up): Likewise.
	(sh_table): Adjust whitespace.
	2004-02-24  Corinna Vinschen  <vinschen@redhat.com>
	* sh-opc.h (arch_sh2a_nofpu_up): New.  Use instead of arch_sh2a_up in
	instruction list throughout.
	(arch_sh2a_up): Redefine to include fpu instruction set.  Use instead
	of arch_sh2a in instruction list throughout.
	(arch_sh2e_up): Accomodate above changes.
	(arch_sh2_up): Ditto.
	2004-02-20  Corinna Vinschen  <vinschen@redhat.com>
	* sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up.
	2004-02-18  Corinna Vinschen  <vinschen@redhat.com>
	* sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling.
	* sh-opc.h (arch_sh2a_nofpu): New.
	(arch_sh2a_up): New, defines sh2a and sh2a_nofpu.
	(sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU
	instruction.
	2004-01-20  DJ Delorie  <dj@redhat.com>
	* sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs.
	2003-12-29  DJ Delorie  <dj@redhat.com>
	* sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up,
	sh_opcode_info, sh_table): Add sh2a support.
	(arch_op32): New, to tag 32-bit opcodes.
	* sh-dis.c (print_insn_sh): Support sh2a opcodes.
	2003-12-02  Michael Snyder  <msnyder@redhat.com>
	* sh-opc.h (arch_sh2a): Add.
	* sh-dis.c (arch_sh2a): Handle.
	* sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a.

2004-07-27  Tomer Levi  <Tomer.Levi@nsc.com>

	* crx-opc.c: Add popx,pushx insns. Indent code, fix comments.

2004-07-22  Nick Clifton  <nickc@redhat.com>

	PR/280
	* h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the
	insns - this is done by objdump itself.
	* h8500-dis.c (print_insn_h8500): Likewise.

2004-07-21  Jan Beulich <jbeulich@novell.com>

	* i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode
	regardless of address size prefix in effect.
	(ptr_reg): Size or address registers does not depend on rex64, but
	on the presence of an address size override.
	(OP_MMX): Use rex.x only for xmm registers.
	(OP_EM): Use rex.z only for xmm registers.

2004-07-20  Maciej W. Rozycki  <macro@linux-mips.org>

	* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
	move/branch operations to the bottom so that VR5400 multimedia
	instructions take precedence in disassembly.

2004-07-20  Maciej W. Rozycki  <macro@linux-mips.org>

	* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
	ISA-specific "break" encoding.

2004-07-13  Elvis Chiang  <elvisfb@gmail.com>

	* arm-opc.h: Fix typo in comment.

2004-07-11  Andreas Schwab  <schwab@suse.de>

	* m68k-dis.c (m68k_valid_ea): Fix typos in last change.

2004-07-09  Andreas Schwab  <schwab@suse.de>

	* m68k-dis.c (m68k_valid_ea): Check validity of all codes.

2004-07-07  Tomer Levi  <Tomer.Levi@nsc.com>

	* Makefile.am (CFILES): Add crx-dis.c, crx-opc.c.
	(ALL_MACHINES): Add crx-dis.lo, crx-opc.lo.
	(crx-dis.lo): New target.
	(crx-opc.lo): Likewise.
	* Makefile.in: Regenerate.
	* configure.in: Handle bfd_crx_arch.
	* configure: Regenerate.
	* crx-dis.c: New file.
	* crx-opc.c: New file.
	* disassemble.c (ARCH_crx): Define.
	(disassembler): Handle ARCH_crx.

2004-06-29  James E Wilson  <wilson@specifixinc.com>

	* ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds.
	* ia64-asmtab.c: Regnerate.

2004-06-28  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf.
	(extract_fxm): Don't test dialect.
	(XFXFXM_MASK): Include the power4 bit.
	(XFXM): Add p4 param.
	(powerpc_opcodes): Add mfocrf and mtocrf.  Adjust mtcr.

2004-06-27  Alexandre Oliva  <aoliva@redhat.com>

	2003-07-21  Richard Sandiford  <rsandifo@redhat.com>
	* disassemble.c (disassembler): Handle bfd_mach_h8300sxn.

2004-06-26  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (BH, XLBH_MASK): Define.
	(powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl.

2004-06-24  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (x_mode): Comment.
	(two_source_ops): File scope.
	(float_mem): Correct fisttpll and fistpll.
	(float_mem_mode): New table.
	(dofloat): Use it.
	(OP_E): Correct intel mode PTR output.
	(ptr_reg): Use open_char and close_char.
	(PNI_Fixup): Handle possible suffix on sidt.  Use op1out etc. for
	operands.  Set two_source_ops.

2004-06-15  Alan Modra  <amodra@bigpond.net.au>

	* arc-ext.c (build_ARC_extmap): Use bfd_get_section_size
	instead of _raw_size.

2004-06-08  Jakub Jelinek  <jakub@redhat.com>

	* ia64-gen.c (in_iclass): Handle more postinc st
	and ld variants.
	* ia64-asmtab.c: Rebuilt.

2004-06-01  Martin Schwidefsky  <schwidefsky@de.ibm.com>

	* s390-opc.txt: Correct architecture mask for some opcodes.
	lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available
	in the esa mode as well.

2004-05-28  Andrew Stubbs <andrew.stubbs@superh.com>

	* sh-dis.c (target_arch): Make unsigned.
	(print_insn_sh): Replace (most of) switch with a call to
	sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
	* sh-opc.h: Redefine architecture flags values.
	Add sh3-nommu architecture.
	Reorganise <arch>_up macros so they make more visual sense.
	(SH_MERGE_ARCH_SET): Define new macro.
	(SH_VALID_BASE_ARCH_SET): Likewise.
	(SH_VALID_MMU_ARCH_SET): Likewise.
	(SH_VALID_CO_ARCH_SET): Likewise.
	(SH_VALID_ARCH_SET): Likewise.
	(SH_MERGE_ARCH_SET_VALID): Likewise.
	(SH_ARCH_SET_HAS_FPU): Likewise.
	(SH_ARCH_SET_HAS_DSP): Likewise.
	(SH_ARCH_UNKNOWN_ARCH): Likewise.
	(sh_get_arch_from_bfd_mach): Add prototype.
	(sh_get_arch_up_from_bfd_mach): Likewise.
	(sh_get_bfd_mach_from_arch_set): Likewise.
	(sh_merge_bfd_arc): Likewise.

2004-05-24  Peter Barada  <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Strip body of diassembly out
        into new match_insn_m68k function.  Loop over canidate
        matches and select first that completely matches.
	* m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit.
	* m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea
        to verify addressing for MAC/EMAC. 
	* m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC
	reigster halves since 'fpu' and 'spl' look misleading.
	* m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases.
	* m68k-opc.c: Rearragne mac/emac cases to use longest for
	first, tighten up match masks.
	* m68k-opc.c: Add 'size' field to struct m68k_opcode.  Produce
	'size' from special case code in print_insn_m68k to
	determine decode size of insns.

2004-05-19  Alan Modra  <amodra@bigpond.net.au>

	* ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as
	well as when -mpower4.

2004-05-13  Nick Clifton  <nickc@redhat.com>

	* po/fr.po: Updated French translation.

2004-05-05  Peter Barada  <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Add new chips, use core
	variants in arch_mask.  Only set m68881/68851 for 68k chips.
	* m68k-op.c: Switch from ColdFire chips to core variants.

2004-05-05  Alan Modra  <amodra@bigpond.net.au>

	PR 147.
	* ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC.

2004-04-29  Ben Elliston  <bje@au.ibm.com>

	* ppc-opc.c (XCMPL): Renmame to XOPL. Update users.
	(powerpc_opcodes): Add "dbczl" instruction for PPC970.

2004-04-22  Kaz Kojima  <kkojima@rr.iij4u.or.jp>

	* sh-dis.c (print_insn_sh): Print the value in constant pool
	as a symbol if it looks like a symbol.

2004-04-22  Peter Barada <peter@the-baradas.com>

	* m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on
	appropriate ColdFire architectures.
	(print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC
	mask addressing.
	Add EMAC instructions, fix MAC instructions. Remove
	macmw/macml/msacmw/msacml instructions since mask addressing now
	supported.

2004-04-20  Jakub Jelinek  <jakub@redhat.com>

	* sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define.
	(fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to
	suffix.  Use fmov*x macros, create all 3 fpsize variants in one
	macro.  Adjust all users.

2004-04-15  Anil Paranjpe  <anilp1@kpitcummins.com>
	
	* h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs"
	separately.

2004-03-30  Kazuhiro Inaoka  <inaoka.kazuhiro@renesas.com>

	* m32r-asm.c: Regenerate.

2004-03-29  Stan Shebs  <shebs@apple.com>

	* mpw-config.in, mpw-make.sed: Remove MPW support files, no longer
	used.

2004-03-19  Alan Modra  <amodra@bigpond.net.au>

	* aclocal.m4: Regenerate.
	* config.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
	* po/opcodes.pot: Regenerate.

2004-03-16  Alan Modra  <amodra@bigpond.net.au>

	* ppc-dis.c (print_insn_powerpc): Don't print tabs.  Handle
	PPC_OPERANDS_GPR_0.
	* ppc-opc.c (RA0): Define.
	(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
	(RAOPT): Rename from RAO.  Update all uses.
	(powerpc_opcodes): Use RA0 as appropriate.

2004-03-15  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg.

2004-03-15  Alan Modra  <amodra@bigpond.net.au>

	* sparc-dis.c (print_insn_sparc): Update getword prototype.

2004-03-12  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (GRPPLOCK): Delete.
	(grps): Delete GRPPLOCK entry.

2004-03-12  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions.
	(M, Mp): Use OP_M.
	(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
	(GRPPADLCK): Define.
	(dis386): Use NOP_Fixup on "nop".
	(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
	(twobyte_has_modrm): Set for 0xa7.
	(padlock_table): Delete.  Move to..
	(grps): ..here, using OP_0f07.  Use OP_Ofae on lfence, mfence
	and clflush.
	(print_insn): Revert PADLOCK_SPECIAL code.
	(OP_E): Delete sfence, lfence, mfence checks.

2004-03-12  Jakub Jelinek  <jakub@redhat.com>

	* i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg.
	(INVLPG_Fixup): New function.
	(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.

2004-03-12  Michal Ludvig  <mludvig@suse.cz>

	* i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines.
	(dis386_twobyte): Opcode 0xa7 is PADLOCK_0.
	(padlock_table): New struct with PadLock instructions.
	(print_insn): Handle PADLOCK_SPECIAL.

2004-03-12  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
	(OP_E): Twiddle clflush to sfence here.

2004-03-08  Nick Clifton  <nickc@redhat.com>

	* po/de.po: Updated German translation.

2003-03-03  Andrew Stubbs  <andrew.stubbs@superh.com>

	* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
	nofpu mode.  Add BFD type bfd_mach_sh4_nommu_nofpu.
	* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
	accordingly.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-asm.c: Regenerate.
	* frv-desc.c: Regenerate.
	* frv-desc.h: Regenerate.
	* frv-dis.c: Regenerate.
	* frv-ibld.c: Regenerate.
	* frv-opc.c: Regenerate.
	* frv-opc.h: Regenerate.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.c, frv-opc.c: Regenerate.

2004-03-01  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.c, frv-opc.c, frv-opc.h: Regenerate.

2004-02-26  Andrew Stubbs  <andrew.stubbs@superh.com>

	* sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4.
	Also correct mistake in the comment.

2004-02-26  Andrew Stubbs <andrew.stubbs@superh.com>

	* sh-dis.c (print_insn_sh): Add REG_N_D nibble type to
	ensure that double registers have even numbers.
	Add REG_N_B01 for nn01 (binary 01) nibble to ensure
	that reserved instruction 0xfffd does not decode the same
	as 0xfdfd (ftrv).
	* sh-opc.h: Add REG_N_D nibble type and use it whereever
	REG_N refers to a double register.
	Add REG_N_B01 nibble type and use it instead of REG_NM
	in ftrv.
	Adjust the bit patterns in a few comments.

2004-02-25  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add m*ivor35.

2004-02-20  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34,
	mtivor32, mtivor33, mtivor34.

2004-02-19  Aldy Hernandez  <aldyh@redhat.com>

	* ppc-opc.c (powerpc_opcodes): Add mfmcar.

2004-02-10  Petko Manolov  <petkan@nucleusys.com>

	* arm-opc.h Maverick accumulator register opcode fixes.

2004-02-13  Ben Elliston  <bje@wasabisystems.com>

	* m32r-dis.c: Regenerate.

2004-01-27  Michael Snyder  <msnyder@redhat.com>

	* sh-opc.h (sh_table): "fsrra", not "fssra".

2004-01-23  Andrew Over <andrew.over@cs.anu.edu.au>

	* sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten
	contraints.

2004-01-19  Andrew Over  <andrew.over@cs.anu.edu.au>

	* sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args.

2004-01-19  Alan Modra  <amodra@bigpond.net.au>

	* i386-dis.c (OP_E): Print scale factor on intel mode sib when not
	1.  Don't print scale factor on AT&T mode when index missing.

2004-01-16  Alexandre Oliva  <aoliva@redhat.com>

	* m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended
	when loaded into XR registers.

2004-01-14  Richard Sandiford  <rsandifo@redhat.com>

	* frv-desc.h: Regenerate.
	* frv-desc.c: Regenerate.
	* frv-opc.c: Regenerate.

2004-01-13  Michael Snyder  <msnyder@redhat.com>

	* sh-dis.c (print_insn_sh): Allocate 4 bytes for insn.

2004-01-09  Paul Brook  <paul@codesourcery.com>

	* arm-opc.h (arm_opcodes): Move generic mcrr after known
	specific opcodes.

2004-01-07  Daniel Jacobowitz  <drow@mvista.com>

	* Makefile.am (libopcodes_la_DEPENDENCIES)
	(libopcodes_la_LIBADD): Revert 2003-05-17 change.  Add explanatory
	comment about the problem.
	* Makefile.in: Regenerate.

2004-01-06  Alexandre Oliva  <aoliva@redhat.com>

	2003-12-19  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some
	cut&paste errors in shifting/truncating numerical operands.
	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo.
	(parse_uslo16): Likewise.
	(parse_uhi16): Parse gotoffhi and gotofffuncdeschi.
	(parse_d12): Parse gotoff12 and gotofffuncdesc12.
	(parse_s12): Likewise.
	2003-08-04  Alexandre Oliva  <aoliva@redhat.com>
	* frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo.
	(parse_uslo16): Likewise.
	(parse_uhi16): Parse gothi and gotfuncdeschi.
	(parse_d12): Parse got12 and gotfuncdesc12.
	(parse_s12): Likewise.

2004-01-02  Albert Bartoszko  <albar@nt.kegel.com.pl>

	* msp430-dis.c (msp430_doubleoperand): Check for an 'add'
	instruction which looks similar to an 'rla' instruction.

For older changes see ChangeLog-0203
\f
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: