Commit | Line | Data |
---|---|---|
cc5add8c MF |
1 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
2 | ||
3 | * interp.c (bfin_syscall): Increase _tbuf storage. Declare new local | |
4 | tstr buffer. Call cb_get_string on tstr when handling CB_SYS_stat64, | |
5 | CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink, | |
6 | CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat. Include | |
7 | tstr in the tbuf output. | |
8 | ||
db2e4d67 MF |
9 | 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
10 | ||
11 | * Makefile.in: Delete all dependency rules. | |
12 | * aclocal.m4, configure: Regenerate. | |
13 | ||
4399a56b MF |
14 | 2011-10-19 Mike Frysinger <vapier@gentoo.org> |
15 | ||
16 | * configure: Regenerate after common/acinclude.m4 update. | |
17 | ||
9c082ca8 MF |
18 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
19 | ||
20 | * configure.ac: Change include to common/acinclude.m4. | |
21 | * aclocal.m4, configure: Regenerate. | |
22 | ||
6ffe910a MF |
23 | 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
24 | ||
25 | * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER | |
26 | call. Replace common.m4 include with SIM_AC_COMMON. | |
27 | * configure: Regenerate. | |
28 | ||
39c1f96a MF |
29 | 2011-09-28 Mike Frysinger <vapier@gentoo.org> |
30 | ||
31 | * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns. | |
32 | ||
2419798b MF |
33 | 2011-07-05 Mike Frysinger <vapier@gentoo.org> |
34 | ||
35 | * interp.c (sim_do_command): Delete. | |
36 | ||
a931db6a MF |
37 | 2011-07-01 Mike Frysinger <vapier@gentoo.org> |
38 | ||
39 | * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from | |
40 | stat_map_32 and stat_map_64. | |
41 | (cb_libgloss_stat_map_32): New stat map. | |
42 | (stat_map_32, stat_map_64): New stat map pointers. | |
43 | (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and | |
44 | stat_map_64 to cb_linux_stat_map_64. | |
45 | (bfin_virtual_init): New function. | |
46 | (sim_create_inferior): Call bfin_virtual_init for all other envs. | |
47 | ||
ce2486ab MF |
48 | 2011-06-22 Mike Frysinger <vapier@gentoo.org> |
49 | ||
50 | * interp.c (bfin_syscall): Delete old comment. Set dreg 1 to | |
51 | sc.result2 and dreg 2 to sc.errcode. | |
52 | ||
1f20b145 MF |
53 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
54 | ||
55 | * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0, | |
56 | else set it. Set ASTAT[AVS] if val is 0. Do this for LSHIFT and | |
57 | ASHIFT accumulator insns. | |
58 | ||
b4876e04 MF |
59 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
60 | ||
61 | * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG. | |
62 | (lshiftrt): Likewise. | |
63 | ||
d5fcd950 MF |
64 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
65 | ||
66 | * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc | |
67 | rather than get_extended_acc in LSHIFT insns. | |
68 | ||
a56a1954 MF |
69 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
70 | ||
71 | * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU. | |
72 | Check MM once when mmod is M_FU to match M_TFU better. | |
73 | ||
90e13d65 MF |
74 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
75 | ||
76 | * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than | |
77 | 32, perform a left shift. Update the corresponding AV bit. Set | |
78 | AZ when the low 32bits are also zero. | |
79 | ||
99dcc4dc MF |
80 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
81 | ||
82 | * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns, | |
83 | call lshift only when count is positive. Otherwise, call ashiftrt. | |
84 | With arithmetic right shift insns, call ashiftrt when the value is | |
85 | small enough, otherwise call lshift. | |
86 | ||
a0a71a7f MF |
87 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
88 | ||
89 | * bfin-sim.c (extract_mult): Call saturate_s16 directly when | |
90 | mmod is M_IH rather than computing the result by hand. | |
91 | ||
388aa9fe MF |
92 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
93 | ||
94 | * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value | |
95 | before saturation, set sat when more cases saturate, and set the | |
96 | overflow bit based on these results. For M_TFU, M_IU, M_FU, and | |
97 | M_W32, change the max values compared against. | |
98 | (decode_dsp32mac_0): Delete v_i and add v_0 and v_1. Pass v_1 | |
99 | when processing MAC1 and pass v_0 when processing MAC0. Combine | |
100 | the results into the V/VS ASTAT bits. | |
101 | ||
f2a56d0a MF |
102 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
103 | ||
104 | * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set | |
105 | and mmod is M_IU. Call saturate_s16 when MM is set and mmod | |
106 | is M_TFU. | |
107 | ||
ef26d60e MF |
108 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
109 | ||
110 | * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and | |
111 | allow MM to sign extend all the time. | |
112 | (decode_macfunc): Likewise. Drop sign extension of unsigned | |
113 | values. | |
114 | ||
73aae8ef MF |
115 | 2011-06-18 Robin Getz <robin.getz@analog.com> |
116 | ||
b02cc5b9 | 117 | * bfin-sim.c (saturate_s40_astat): Change ">=" to ">". |
73aae8ef MF |
118 | (decode_macfunc): Likewise when mmod is M_IH. |
119 | ||
886ea33b MF |
120 | 2011-06-18 Mike Frysinger <vapier@gentoo.org> |
121 | ||
122 | * interp.c (sim_create_inferior): Change free to freeargv. | |
123 | ||
eb324344 MF |
124 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
125 | ||
126 | * machs.c (bf534_dev, bf537_dev): Add glue-or devices. | |
127 | (bf537_port): Define applicable devices with PORT to the glue-or | |
128 | devices instead of SIC. | |
129 | (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic. | |
130 | Only parse reg/type when the device has an address. Move the call | |
131 | to dv_bfin_hw_port_parse up before slash check. | |
132 | ||
082e1c4a MF |
133 | 2011-06-04 Mike Frysinger <vapier@gentoo.org> |
134 | ||
135 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the | |
136 | BFIN_SIC_TO_CEC_PORTS definition. | |
137 | (SIC_PORTS): New define. | |
138 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
139 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
140 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
141 | Delete old layouts. | |
142 | (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports, | |
143 | bfin_sic_561_ports): Define new layouts with SIC_PORTS(). | |
144 | (bfin_sic_finish): Change reference to bfin_sic_50x_ports, | |
145 | bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports | |
146 | to bfin_sic2_ports. Change reference to bfin_sic_533_ports, | |
147 | bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports. | |
148 | Change reference to bfin_sic_54x_ports to bfin_sic3_ports. | |
149 | * machs.c (bfin_port_layout): New structure. | |
150 | (bfin_model_data): Add new "port" and "port_count" members. | |
151 | (PORT, SIC): New defines. | |
152 | (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port, | |
153 | bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port): | |
154 | Move and redefine port layout from dv-bfin_sic.c to here. | |
155 | (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port, | |
156 | bf518_port, bf522_port, bf523_port, bf524_port, bf525_port, | |
157 | bf526_port, bf527_port, bf531_port, bf532_port, bf534_port, | |
158 | bf536_port, bf539_port, bf542_port, bf544_port, bf547_port, | |
159 | bf548_port, bf549_port): New defines. | |
160 | (bfin_model_data): Link in new bfin_port_layout.port member. | |
161 | (dv_bfin_hw_port_parse): New function. | |
162 | (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function. | |
163 | (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for | |
164 | bfin_sic links with new dv_bfin_hw_port_parse function. | |
165 | ||
36f3e981 MF |
166 | 2011-06-03 Mike Frysinger <vapier@gentoo.org> |
167 | ||
168 | * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation. | |
169 | ||
ea1f7d4c MF |
170 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
171 | ||
172 | * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL. | |
173 | ||
f2db709f MF |
174 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
175 | ||
176 | * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ... | |
177 | * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ... | |
178 | * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ... | |
179 | * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ... | |
180 | * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ... | |
181 | * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ... | |
182 | * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ... | |
183 | * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ... | |
184 | * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ... | |
185 | * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ... | |
186 | * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ... | |
187 | * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ... | |
188 | * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ... | |
189 | * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ... | |
190 | * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ... | |
191 | * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ... | |
192 | * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ... | |
193 | * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ... | |
194 | * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ... | |
195 | * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ... | |
196 | * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ... | |
197 | * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ... | |
198 | * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ... | |
199 | * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ... | |
200 | * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ... | |
201 | * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ... | |
202 | * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ... | |
203 | * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ... | |
204 | * machs.h: ... here. | |
205 | * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac. | |
206 | ||
c43aadca MF |
207 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
208 | ||
209 | * Makefile.in (dv-bfin_pfmon.o): New target. | |
210 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon. | |
211 | * configure: Regenerated. | |
212 | * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files. | |
213 | * machs.c: Add include new bfin_pfmon.h. | |
214 | (bfin_core_dev): Add pfmon. | |
215 | ||
dfb61fb6 MF |
216 | 2011-05-25 Mike Frysinger <vapier@gentoo.org> |
217 | ||
218 | * machs.c (bf526_roms): Add a region with rev of 2. | |
219 | (bf54x_roms): Add regions with rev of 4. | |
220 | * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and | |
221 | bf54x_l1-0.4.h headers. | |
222 | * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h: | |
223 | New header files. | |
224 | ||
efac2223 MF |
225 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
226 | ||
227 | * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6) | |
228 | check for SP reg. | |
229 | ||
28fe96b7 MF |
230 | 2011-05-14 Mike Frysinger <vapier@gentoo.org> |
231 | ||
232 | * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg. Declare a | |
233 | local uart. When LOOP_ENA is set in mcr, write to the saved byte | |
234 | and count fields of the uart. | |
235 | (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte | |
236 | and bfin_uart_get_next_byte. | |
237 | (bfin_uart_get_next_byte): Add a mcr arg. Move uart->saved_count | |
238 | check first, and skip the remaining code when LOOP_ENA is set in mcr. | |
239 | * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument. | |
240 | (bfin_uart_get_next_byte): Likewise. | |
241 | (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define. | |
242 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when | |
243 | calling bfin_uart_write_byte and bfin_uart_get_next_byte. | |
244 | ||
b44f3f63 MF |
245 | 2011-05-09 Mike Frysinger <vapier@gentoo.org> |
246 | ||
247 | * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits | |
248 | from uart->lsr before setting them. | |
249 | ||
2613074f MF |
250 | 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
251 | ||
252 | * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. | |
253 | (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, | |
254 | bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, | |
255 | bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, | |
256 | bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): | |
257 | Likewise. | |
258 | ||
054c055b MF |
259 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
260 | ||
261 | * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. | |
262 | (bfin_gpio_io_write_buffer): Store the current port state into | |
263 | "data", and call bfin_gpio_forward_ouput when the data or dir | |
264 | MMRs are updated. | |
265 | (bfin_gpio_ports): Change p0..p15 to bidirect_port. | |
266 | ||
5e0ba1a3 MF |
267 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
268 | ||
269 | * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. | |
270 | (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. | |
271 | (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the | |
272 | mask a or mask b MMRs are written. | |
273 | (bfin_gpio_port_event): When handling edge gpios, set the bit in | |
274 | int_state, call bfin_gpio_forward_ints, and then clear the bit. | |
275 | When handling level gpios, clear/set the bit in int_state rather | |
276 | than returning immediately. Call bfin_gpio_forward_ints instead | |
277 | of checking mask[ab] and calling HW_TRACE/hw_port_event directly. | |
278 | ||
0427acfb MF |
279 | 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
280 | ||
281 | * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for | |
282 | BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and | |
283 | BYTEUNPACK. | |
284 | (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, | |
285 | BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. | |
286 | ||
d2cfa400 MF |
287 | 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
288 | ||
289 | * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling | |
290 | BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, | |
291 | and BYTEUNPACK insns. | |
292 | ||
e10d6db3 MF |
293 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
294 | ||
295 | * dv-bfin_sic.c (bfin_sic_port_event): New helper function. | |
296 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
297 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level | |
298 | in the trace output, and call the new bfin_sic_port_event func. | |
299 | ||
8aacdaf4 MF |
300 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
301 | ||
302 | * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. | |
303 | ||
2b12772f MF |
304 | 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
305 | ||
306 | * dv-bfin_otp.c (bfin_otp_ports): Declare. | |
307 | (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. | |
308 | ||
6294f8ea MF |
309 | 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
310 | ||
311 | * configure: Regenerate after common/aclocal.m4 changes. | |
312 | ||
1a3af0bf MF |
313 | 2011-03-28 Robin Getz <robin.getz@analog.com> |
314 | ||
315 | * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 | |
316 | and add to casted low 16bits of A0.L and store in val0. Cast high | |
317 | 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and | |
318 | store in val1. Delete bit checks of val0 and val1. | |
319 | ||
36aef942 MF |
320 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
321 | ||
322 | * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when | |
323 | the result was 0x80000000 for RND12 subtraction. | |
324 | ||
fcd1ee07 MF |
325 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
326 | ||
327 | * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. | |
328 | ||
a31d4fd9 MF |
329 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
330 | ||
331 | * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every | |
332 | major code flow point. | |
333 | * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just | |
334 | before calling hw_port_event on ourselves. | |
335 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
336 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE | |
337 | at the start of the function. | |
338 | ||
b72cc8e1 MF |
339 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
340 | ||
341 | * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. | |
342 | Normalize "level" to 0/1 values. Shift "level" over by "my_port". | |
343 | Invert port->both bit check. | |
344 | ||
eaf863cd MF |
345 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
346 | ||
347 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the | |
348 | valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. | |
349 | ||
b16a1f4c MF |
350 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
351 | ||
352 | * TODO: Document some known SIC issues. | |
353 | ||
9922f803 MF |
354 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
355 | ||
356 | * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. | |
357 | * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. | |
358 | * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 | |
359 | for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. | |
360 | * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. | |
361 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. | |
362 | * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. | |
363 | * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. | |
364 | * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. | |
365 | * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. | |
366 | * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. | |
367 | * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. | |
368 | * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. | |
369 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. | |
370 | ||
2d2bab5b MF |
371 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
372 | ||
373 | * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. | |
374 | ||
972dbc8a MF |
375 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
376 | ||
377 | * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. | |
378 | ||
8e670c0a MF |
379 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
380 | ||
381 | * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended | |
382 | value for the VIT_MAX insn, and mask off the result when done. | |
383 | ||
de0addfb MF |
384 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
385 | ||
386 | * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, | |
387 | and set A0 to a0_lo when up_lo is false. | |
388 | ||
beb378a5 MF |
389 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
390 | ||
391 | * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of | |
392 | saturate_s40, and use the v parameter to update the AV bit. Set the | |
393 | AC bit only when the final result is 0. | |
394 | ||
e4a861d1 MF |
395 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
396 | ||
397 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. | |
398 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
399 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
400 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
401 | Encode ids with the ENC macro. | |
402 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
403 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx | |
404 | from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. | |
405 | (bfin_sic_533_port_event): Delete. | |
406 | (bfin_sic_finish): Call set_hw_port_event with | |
407 | bfin_sic_537_port_event for BF533 and BF59x targets. | |
408 | ||
8d8a9746 MF |
409 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
410 | ||
411 | * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for | |
412 | BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. | |
413 | ||
a9c3ef47 MF |
414 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
415 | ||
416 | * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, | |
417 | bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): | |
418 | Change bfin_gpio addresses from f/g/h to 5/6/7. | |
419 | (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. | |
420 | ||
9e6584c9 MF |
421 | 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
422 | ||
423 | * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. | |
424 | * configure: Regenerate. | |
425 | * config.in: Regenerate. | |
426 | * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using | |
427 | kill or pread. | |
428 | ||
b5215db0 MF |
429 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
430 | ||
431 | * Makefile.in (dv-bfin_gpio.o): New target. | |
432 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. | |
433 | * configure: Regenerate. | |
434 | * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. | |
435 | * machs.c: Include dv-bfin_gpio.h. | |
436 | (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, | |
437 | bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): | |
438 | Delete GPIO memory stubs. | |
439 | (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, | |
440 | bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO | |
441 | peripheral devices. | |
442 | (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. | |
443 | ||
990d19fd MF |
444 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
445 | ||
446 | * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, | |
447 | bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, | |
448 | bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, | |
449 | bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, | |
450 | bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, | |
451 | bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, | |
452 | bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, | |
453 | bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, | |
454 | bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, | |
455 | dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, | |
456 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, | |
457 | dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, | |
458 | dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, | |
459 | dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, | |
460 | dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, | |
461 | dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, | |
462 | linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. | |
463 | ||
227d2658 MF |
464 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
465 | ||
466 | * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds | |
467 | and subs. | |
468 | ||
e3809a37 MF |
469 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
470 | ||
471 | * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. | |
472 | ||
86d3d8de MF |
473 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
474 | ||
475 | * bfin-sim.c (decode_macfunc): New neg parameter. Set when the | |
476 | high bit is set after extract_mult. | |
477 | (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc | |
478 | functions. Use these to update the AN bit. | |
479 | ||
9b7509d9 MF |
480 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
481 | ||
482 | * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to | |
483 | the extract_mult functions. Include these when updating the V, VS, | |
484 | and V_COPY bits. | |
485 | ||
bf416ccd MF |
486 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
487 | ||
488 | * bfin-sim.c (astat_names): New global bit array. | |
489 | (decode_CC2stat_0): Delete local astat_name and astat_names. | |
490 | (decode_psedodbg_assert_0): Move hardcoded offset into a variable. | |
491 | Print out ASTAT bit values when checking an ASTAT register. | |
492 | ||
c9329594 MF |
493 | 2010-03-15 Robin Getz <robin.getz@analog.com> |
494 | ||
495 | * bfin-sim.c (extract_mult): Handle M_IU. | |
496 | ||
f4e33aa6 MF |
497 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
498 | ||
499 | * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, | |
500 | bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, | |
501 | bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, | |
502 | bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, | |
503 | bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, | |
504 | bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, | |
505 | bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, | |
506 | bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, | |
507 | bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, | |
508 | bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, | |
509 | configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, | |
510 | dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, | |
511 | dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, | |
512 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, | |
513 | dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, | |
514 | dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, | |
515 | dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, | |
516 | dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, | |
517 | dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, | |
518 | dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, | |
519 | dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, | |
520 | dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, | |
521 | dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, | |
522 | dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, | |
523 | gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, | |
524 | linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, | |
525 | tconfig.in: New Blackfin port. |