projects / deliverable / binutils-gdb.git / blame
| Commit | Line | Data |
|---|---|---|
| 2613074f MF |
1 | 2011-04-27 Mike Frysinger <vapier@gentoo.org> |
| 2 | ||
| 3 | * dv-bfin_dmac.c (bfin_dmac): Constify pmap array. | |
| 4 | (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap, | |
| 5 | bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap, | |
| 6 | bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap, | |
| 7 | bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap): | |
| 8 | Likewise. | |
| 9 | ||
| 054c055b MF |
10 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| 11 | ||
| 12 | * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function. | |
| 13 | (bfin_gpio_io_write_buffer): Store the current port state into | |
| 14 | "data", and call bfin_gpio_forward_ouput when the data or dir | |
| 15 | MMRs are updated. | |
| 16 | (bfin_gpio_ports): Change p0..p15 to bidirect_port. | |
| 17 | ||
| 5e0ba1a3 MF |
18 | 2011-04-26 Mike Frysinger <vapier@gentoo.org> |
| 19 | ||
| 20 | * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member. | |
| 21 | (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions. | |
| 22 | (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the | |
| 23 | mask a or mask b MMRs are written. | |
| 24 | (bfin_gpio_port_event): When handling edge gpios, set the bit in | |
| 25 | int_state, call bfin_gpio_forward_ints, and then clear the bit. | |
| 26 | When handling level gpios, clear/set the bit in int_state rather | |
| 27 | than returning immediately. Call bfin_gpio_forward_ints instead | |
| 28 | of checking mask[ab] and calling HW_TRACE/hw_port_event directly. | |
| 29 | ||
| 0427acfb MF |
30 | 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| 31 | ||
| 32 | * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for | |
| 33 | BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and | |
| 34 | BYTEUNPACK. | |
| 35 | (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK, | |
| 36 | BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24. | |
| 37 | ||
| d2cfa400 MF |
38 | 2011-04-14 Mike Frysinger <vapier@gentoo.org> |
| 39 | ||
| 40 | * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling | |
| 41 | BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, | |
| 42 | and BYTEUNPACK insns. | |
| 43 | ||
| e10d6db3 MF |
44 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| 45 | ||
| 46 | * dv-bfin_sic.c (bfin_sic_port_event): New helper function. | |
| 47 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 48 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level | |
| 49 | in the trace output, and call the new bfin_sic_port_event func. | |
| 50 | ||
| 8aacdaf4 MF |
51 | 2011-04-11 Mike Frysinger <vapier@gentoo.org> |
| 52 | ||
| 53 | * dv-bfin_gpio.c (bfin_gpio_ports): Add p15. | |
| 54 | ||
| 2b12772f MF |
55 | 2011-04-01 Mike Frysinger <vapier@gentoo.org> |
| 56 | ||
| 57 | * dv-bfin_otp.c (bfin_otp_ports): Declare. | |
| 58 | (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports. | |
| 59 | ||
| 6294f8ea MF |
60 | 2011-03-29 Mike Frysinger <vapier@gentoo.org> |
| 61 | ||
| 62 | * configure: Regenerate after common/aclocal.m4 changes. | |
| 63 | ||
| 1a3af0bf MF |
64 | 2011-03-28 Robin Getz <robin.getz@analog.com> |
| 65 | ||
| 66 | * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16 | |
| 67 | and add to casted low 16bits of A0.L and store in val0. Cast high | |
| 68 | 16bits of A1.W to bs16 and add to casted low 16bits of A1.L and | |
| 69 | store in val1. Delete bit checks of val0 and val1. | |
| 70 | ||
| 36aef942 MF |
71 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
| 72 | ||
| 73 | * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when | |
| 74 | the result was 0x80000000 for RND12 subtraction. | |
| 75 | ||
| fcd1ee07 MF |
76 | 2011-03-26 Robin Getz <robin.getz@analog.com> |
| 77 | ||
| 78 | * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set. | |
| 79 | ||
| a31d4fd9 MF |
80 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 81 | ||
| 82 | * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every | |
| 83 | major code flow point. | |
| 84 | * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just | |
| 85 | before calling hw_port_event on ourselves. | |
| 86 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 87 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE | |
| 88 | at the start of the function. | |
| 89 | ||
| b72cc8e1 MF |
90 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 91 | ||
| 92 | * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking. | |
| 93 | Normalize "level" to 0/1 values. Shift "level" over by "my_port". | |
| 94 | Invert port->both bit check. | |
| 95 | ||
| eaf863cd MF |
96 | 2011-03-24 Mike Frysinger <vapier@gentoo.org> |
| 97 | ||
| 98 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the | |
| 99 | valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs. | |
| 100 | ||
| b16a1f4c MF |
101 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 102 | ||
| 103 | * TODO: Document some known SIC issues. | |
| 104 | ||
| 9922f803 MF |
105 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 106 | ||
| 107 | * devices.h (dv_w1c): Fix typos in documentation of "bits" arg. | |
| 108 | * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4. | |
| 109 | * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4 | |
| 110 | for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs. | |
| 111 | * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2. | |
| 112 | * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2. | |
| 113 | * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4. | |
| 114 | * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2. | |
| 115 | * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2. | |
| 116 | * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 117 | * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2. | |
| 118 | * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 119 | * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2. | |
| 120 | * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2. | |
| 121 | ||
| 2d2bab5b MF |
122 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 123 | ||
| 124 | * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define. | |
| 125 | ||
| 972dbc8a MF |
126 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 127 | ||
| 128 | * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG. | |
| 129 | ||
| 8e670c0a MF |
130 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 131 | ||
| 132 | * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended | |
| 133 | value for the VIT_MAX insn, and mask off the result when done. | |
| 134 | ||
| de0addfb MF |
135 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 136 | ||
| 137 | * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false, | |
| 138 | and set A0 to a0_lo when up_lo is false. | |
| 139 | ||
| beb378a5 MF |
140 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 141 | ||
| 142 | * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of | |
| 143 | saturate_s40, and use the v parameter to update the AV bit. Set the | |
| 144 | AC bit only when the final result is 0. | |
| 145 | ||
| e4a861d1 MF |
146 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 147 | ||
| 148 | * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define. | |
| 149 | (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports, | |
| 150 | bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports, | |
| 151 | bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports): | |
| 152 | Encode ids with the ENC macro. | |
| 153 | (bfin_sic_52x_port_event, bfin_sic_537_port_event, | |
| 154 | bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx | |
| 155 | from my_port with DEC_SIC, and set bit from my_port with DEC_PIN. | |
| 156 | (bfin_sic_533_port_event): Delete. | |
| 157 | (bfin_sic_finish): Call set_hw_port_event with | |
| 158 | bfin_sic_537_port_event for BF533 and BF59x targets. | |
| 159 | ||
| 8d8a9746 MF |
160 | 2011-03-23 Robin Getz <robin.getz@analog.com> |
| 161 | ||
| 162 | * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for | |
| 163 | BYTEOP1P, BYTEOP2P, and BYTEOP3P insns. | |
| 164 | ||
| a9c3ef47 MF |
165 | 2011-03-23 Mike Frysinger <vapier@gentoo.org> |
| 166 | ||
| 167 | * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, | |
| 168 | bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): | |
| 169 | Change bfin_gpio addresses from f/g/h to 5/6/7. | |
| 170 | (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'. | |
| 171 | ||
| 9e6584c9 MF |
172 | 2011-03-17 Mike Frysinger <vapier@gentoo.org> |
| 173 | ||
| 174 | * configure.ac (AC_CHECK_FUNCS): Check for kill and pread. | |
| 175 | * configure: Regenerate. | |
| 176 | * config.in: Regenerate. | |
| 177 | * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using | |
| 178 | kill or pread. | |
| 179 | ||
| b5215db0 MF |
180 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| 181 | ||
| 182 | * Makefile.in (dv-bfin_gpio.o): New target. | |
| 183 | * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio. | |
| 184 | * configure: Regenerate. | |
| 185 | * dv-bfin_gpio.c, dv-bfin_gpio.h: New files. | |
| 186 | * machs.c: Include dv-bfin_gpio.h. | |
| 187 | (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem, | |
| 188 | bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem): | |
| 189 | Delete GPIO memory stubs. | |
| 190 | (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev, | |
| 191 | bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO | |
| 192 | peripheral devices. | |
| 193 | (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC. | |
| 194 | ||
| 990d19fd MF |
195 | 2011-03-15 Mike Frysinger <vapier@gentoo.org> |
| 196 | ||
| 197 | * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h, | |
| 198 | bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h, | |
| 199 | bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h, | |
| 200 | bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h, | |
| 201 | bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h, | |
| 202 | bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h, | |
| 203 | bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h, | |
| 204 | bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h, | |
| 205 | bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c, | |
| 206 | dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c, | |
| 207 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c, | |
| 208 | dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c, | |
| 209 | dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c, | |
| 210 | dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c, | |
| 211 | dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c, | |
| 212 | dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c, | |
| 213 | linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style. | |
| 214 | ||
| 227d2658 MF |
215 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 216 | ||
| 217 | * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds | |
| 218 | and subs. | |
| 219 | ||
| e3809a37 MF |
220 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 221 | ||
| 222 | * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check. | |
| 223 | ||
| 86d3d8de MF |
224 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 225 | ||
| 226 | * bfin-sim.c (decode_macfunc): New neg parameter. Set when the | |
| 227 | high bit is set after extract_mult. | |
| 228 | (decode_dsp32mac_0): Declare n_1 and n_0. Pass to the decode_macfunc | |
| 229 | functions. Use these to update the AN bit. | |
| 230 | ||
| 9b7509d9 MF |
231 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 232 | ||
| 233 | * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1. Pass to | |
| 234 | the extract_mult functions. Include these when updating the V, VS, | |
| 235 | and V_COPY bits. | |
| 236 | ||
| bf416ccd MF |
237 | 2011-03-15 Robin Getz <robin.getz@analog.com> |
| 238 | ||
| 239 | * bfin-sim.c (astat_names): New global bit array. | |
| 240 | (decode_CC2stat_0): Delete local astat_name and astat_names. | |
| 241 | (decode_psedodbg_assert_0): Move hardcoded offset into a variable. | |
| 242 | Print out ASTAT bit values when checking an ASTAT register. | |
| 243 | ||
| c9329594 MF |
244 | 2010-03-15 Robin Getz <robin.getz@analog.com> |
| 245 | ||
| 246 | * bfin-sim.c (extract_mult): Handle M_IU. | |
| 247 | ||
| f4e33aa6 MF |
248 | 2011-03-05 Mike Frysinger <vapier@gentoo.org> |
| 249 | ||
| 250 | * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h, | |
| 251 | bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, | |
| 252 | bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, | |
| 253 | bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, | |
| 254 | bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, | |
| 255 | bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, | |
| 256 | bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, | |
| 257 | bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, | |
| 258 | bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, | |
| 259 | bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure, | |
| 260 | configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h, | |
| 261 | dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h, | |
| 262 | dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h, | |
| 263 | dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c, | |
| 264 | dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c, | |
| 265 | dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c, | |
| 266 | dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c, | |
| 267 | dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c, | |
| 268 | dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c, | |
| 269 | dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c, | |
| 270 | dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c, | |
| 271 | dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c, | |
| 272 | dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c, | |
| 273 | dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c, | |
| 274 | gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s, | |
| 275 | linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h, | |
| 276 | tconfig.in: New Blackfin port. |