Commit | Line | Data |
---|---|---|
c906108c SS |
1 | /* MIPS Simulator definition. |
2 | Copyright (C) 1997, 1998 Free Software Foundation, Inc. | |
3 | Contributed by Cygnus Support. | |
4 | ||
5 | This file is part of GDB, the GNU debugger. | |
6 | ||
7 | This program is free software; you can redistribute it and/or modify | |
8 | it under the terms of the GNU General Public License as published by | |
9 | the Free Software Foundation; either version 2, or (at your option) | |
10 | any later version. | |
11 | ||
12 | This program is distributed in the hope that it will be useful, | |
13 | but WITHOUT ANY WARRANTY; without even the implied warranty of | |
14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
15 | GNU General Public License for more details. | |
16 | ||
17 | You should have received a copy of the GNU General Public License along | |
18 | with this program; if not, write to the Free Software Foundation, Inc., | |
19 | 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ | |
20 | ||
21 | #ifndef SIM_MAIN_H | |
22 | #define SIM_MAIN_H | |
23 | ||
24 | /* This simulator doesn't cache the Current Instruction Address */ | |
25 | /* #define SIM_ENGINE_HALT_HOOK(SD, LAST_CPU, CIA) */ | |
26 | /* #define SIM_ENGINE_RESUME_HOOK(SD, LAST_CPU, CIA) */ | |
27 | ||
28 | #define SIM_HAVE_BIENDIAN | |
29 | ||
30 | ||
31 | /* hobble some common features for moment */ | |
32 | #define WITH_WATCHPOINTS 1 | |
33 | #define WITH_MODULO_MEMORY 1 | |
34 | ||
35 | ||
36 | #define SIM_CORE_SIGNAL(SD,CPU,CIA,MAP,NR_BYTES,ADDR,TRANSFER,ERROR) \ | |
37 | mips_core_signal ((SD), (CPU), (CIA), (MAP), (NR_BYTES), (ADDR), (TRANSFER), (ERROR)) | |
38 | ||
39 | #include "sim-basics.h" | |
40 | ||
41 | typedef address_word sim_cia; | |
42 | ||
43 | #include "sim-base.h" | |
44 | ||
45 | ||
5accf1ff | 46 | /* Deprecated macros and types for manipulating 64bit values. Use |
c906108c SS |
47 | ../common/sim-bits.h and ../common/sim-endian.h macros instead. */ |
48 | ||
49 | typedef signed64 word64; | |
50 | typedef unsigned64 uword64; | |
51 | ||
52 | #define WORD64LO(t) (unsigned int)((t)&0xFFFFFFFF) | |
53 | #define WORD64HI(t) (unsigned int)(((uword64)(t))>>32) | |
54 | #define SET64LO(t) (((uword64)(t))&0xFFFFFFFF) | |
55 | #define SET64HI(t) (((uword64)(t))<<32) | |
56 | #define WORD64(h,l) ((word64)((SET64HI(h)|SET64LO(l)))) | |
57 | #define UWORD64(h,l) (SET64HI(h)|SET64LO(l)) | |
58 | ||
c906108c SS |
59 | /* Check if a value will fit within a halfword: */ |
60 | #define NOTHALFWORDVALUE(v) ((((((uword64)(v)>>16) == 0) && !((v) & ((unsigned)1 << 15))) || (((((uword64)(v)>>32) == 0xFFFFFFFF) && ((((uword64)(v)>>16) & 0xFFFF) == 0xFFFF)) && ((v) & ((unsigned)1 << 15)))) ? (1 == 0) : (1 == 1)) | |
61 | ||
62 | ||
63 | ||
64 | /* Floating-point operations: */ | |
65 | ||
66 | #include "sim-fpu.h" | |
67 | ||
68 | /* FPU registers must be one of the following types. All other values | |
69 | are reserved (and undefined). */ | |
70 | typedef enum { | |
71 | fmt_single = 0, | |
72 | fmt_double = 1, | |
73 | fmt_word = 4, | |
74 | fmt_long = 5, | |
75 | /* The following are well outside the normal acceptable format | |
76 | range, and are used in the register status vector. */ | |
77 | fmt_unknown = 0x10000000, | |
78 | fmt_uninterpreted = 0x20000000, | |
79 | fmt_uninterpreted_32 = 0x40000000, | |
80 | fmt_uninterpreted_64 = 0x80000000U, | |
81 | } FP_formats; | |
82 | ||
c906108c SS |
83 | /* Macro to update FPSR condition-code field. This is complicated by |
84 | the fact that there is a hole in the index range of the bits within | |
85 | the FCSR register. Also, the number of bits visible depends on the | |
86 | MIPS ISA version being supported. */ | |
87 | ||
88 | #define SETFCC(cc,v) {\ | |
89 | int bit = ((cc == 0) ? 23 : (24 + (cc)));\ | |
90 | FCSR = ((FCSR & ~(1 << bit)) | ((v) << bit));\ | |
91 | } | |
92 | #define GETFCC(cc) (((((cc) == 0) ? (FCSR & (1 << 23)) : (FCSR & (1 << (24 + (cc))))) != 0) ? 1U : 0) | |
93 | ||
94 | /* This should be the COC1 value at the start of the preceding | |
95 | instruction: */ | |
96 | #define PREVCOC1() ((STATE & simPCOC1) ? 1 : 0) | |
97 | ||
98 | #ifdef TARGET_ENABLE_FR | |
99 | /* FIXME: this should be enabled for all targets, but needs testing first. */ | |
100 | #define SizeFGR() (((WITH_TARGET_FLOATING_POINT_BITSIZE) == 64) \ | |
101 | ? ((SR & status_FR) ? 64 : 32) \ | |
102 | : (WITH_TARGET_FLOATING_POINT_BITSIZE)) | |
103 | #else | |
104 | #define SizeFGR() (WITH_TARGET_FLOATING_POINT_BITSIZE) | |
105 | #endif | |
106 | ||
107 | /* Standard FCRS bits: */ | |
108 | #define IR (0) /* Inexact Result */ | |
109 | #define UF (1) /* UnderFlow */ | |
110 | #define OF (2) /* OverFlow */ | |
111 | #define DZ (3) /* Division by Zero */ | |
112 | #define IO (4) /* Invalid Operation */ | |
113 | #define UO (5) /* Unimplemented Operation */ | |
114 | ||
115 | /* Get masks for individual flags: */ | |
116 | #if 1 /* SAFE version */ | |
117 | #define FP_FLAGS(b) (((unsigned)(b) < 5) ? (1 << ((b) + 2)) : 0) | |
118 | #define FP_ENABLE(b) (((unsigned)(b) < 5) ? (1 << ((b) + 7)) : 0) | |
119 | #define FP_CAUSE(b) (((unsigned)(b) < 6) ? (1 << ((b) + 12)) : 0) | |
120 | #else | |
121 | #define FP_FLAGS(b) (1 << ((b) + 2)) | |
122 | #define FP_ENABLE(b) (1 << ((b) + 7)) | |
123 | #define FP_CAUSE(b) (1 << ((b) + 12)) | |
124 | #endif | |
125 | ||
126 | #define FP_FS (1 << 24) /* MIPS III onwards : Flush to Zero */ | |
127 | ||
128 | #define FP_MASK_RM (0x3) | |
129 | #define FP_SH_RM (0) | |
130 | #define FP_RM_NEAREST (0) /* Round to nearest (Round) */ | |
131 | #define FP_RM_TOZERO (1) /* Round to zero (Trunc) */ | |
132 | #define FP_RM_TOPINF (2) /* Round to Plus infinity (Ceil) */ | |
133 | #define FP_RM_TOMINF (3) /* Round to Minus infinity (Floor) */ | |
134 | #define GETRM() (int)((FCSR >> FP_SH_RM) & FP_MASK_RM) | |
135 | ||
136 | ||
137 | ||
138 | ||
139 | ||
140 | ||
141 | /* HI/LO register accesses */ | |
142 | ||
143 | /* For some MIPS targets, the HI/LO registers have certain timing | |
144 | restrictions in that, for instance, a read of a HI register must be | |
145 | separated by at least three instructions from a preceeding read. | |
146 | ||
147 | The struct below is used to record the last access by each of A MT, | |
148 | MF or other OP instruction to a HI/LO register. See mips.igen for | |
149 | more details. */ | |
150 | ||
151 | typedef struct _hilo_access { | |
152 | signed64 timestamp; | |
153 | address_word cia; | |
154 | } hilo_access; | |
155 | ||
156 | typedef struct _hilo_history { | |
157 | hilo_access mt; | |
158 | hilo_access mf; | |
159 | hilo_access op; | |
160 | } hilo_history; | |
161 | ||
162 | ||
163 | ||
164 | ||
165 | /* Integer ALU operations: */ | |
166 | ||
167 | #include "sim-alu.h" | |
168 | ||
169 | #define ALU32_END(ANS) \ | |
170 | if (ALU32_HAD_OVERFLOW) \ | |
171 | SignalExceptionIntegerOverflow (); \ | |
172 | (ANS) = (signed32) ALU32_OVERFLOW_RESULT | |
173 | ||
174 | ||
175 | #define ALU64_END(ANS) \ | |
176 | if (ALU64_HAD_OVERFLOW) \ | |
177 | SignalExceptionIntegerOverflow (); \ | |
178 | (ANS) = ALU64_OVERFLOW_RESULT; | |
179 | ||
180 | ||
181 | ||
182 | ||
183 | ||
184 | /* The following is probably not used for MIPS IV onwards: */ | |
185 | /* Slots for delayed register updates. For the moment we just have a | |
186 | fixed number of slots (rather than a more generic, dynamic | |
187 | system). This keeps the simulator fast. However, we only allow | |
188 | for the register update to be delayed for a single instruction | |
189 | cycle. */ | |
190 | #define PSLOTS (8) /* Maximum number of instruction cycles */ | |
191 | ||
192 | typedef struct _pending_write_queue { | |
193 | int in; | |
194 | int out; | |
195 | int total; | |
196 | int slot_delay[PSLOTS]; | |
197 | int slot_size[PSLOTS]; | |
198 | int slot_bit[PSLOTS]; | |
199 | void *slot_dest[PSLOTS]; | |
200 | unsigned64 slot_value[PSLOTS]; | |
201 | } pending_write_queue; | |
202 | ||
203 | #ifndef PENDING_TRACE | |
204 | #define PENDING_TRACE 0 | |
205 | #endif | |
206 | #define PENDING_IN ((CPU)->pending.in) | |
207 | #define PENDING_OUT ((CPU)->pending.out) | |
208 | #define PENDING_TOTAL ((CPU)->pending.total) | |
209 | #define PENDING_SLOT_SIZE ((CPU)->pending.slot_size) | |
210 | #define PENDING_SLOT_BIT ((CPU)->pending.slot_bit) | |
211 | #define PENDING_SLOT_DELAY ((CPU)->pending.slot_delay) | |
212 | #define PENDING_SLOT_DEST ((CPU)->pending.slot_dest) | |
213 | #define PENDING_SLOT_VALUE ((CPU)->pending.slot_value) | |
214 | ||
215 | /* Invalidate the pending write queue, all pending writes are | |
216 | discarded. */ | |
217 | ||
218 | #define PENDING_INVALIDATE() \ | |
219 | memset (&(CPU)->pending, 0, sizeof ((CPU)->pending)) | |
220 | ||
221 | /* Schedule a write to DEST for N cycles time. For 64 bit | |
222 | destinations, schedule two writes. For floating point registers, | |
223 | the caller should schedule a write to both the dest register and | |
224 | the FPR_STATE register. When BIT is non-negative, only BIT of DEST | |
225 | is updated. */ | |
226 | ||
227 | #define PENDING_SCHED(DEST,VAL,DELAY,BIT) \ | |
228 | do { \ | |
229 | if (PENDING_SLOT_DEST[PENDING_IN] != NULL) \ | |
230 | sim_engine_abort (SD, CPU, cia, \ | |
231 | "PENDING_SCHED - buffer overflow\n"); \ | |
232 | if (PENDING_TRACE) \ | |
233 | sim_io_eprintf (SD, "PENDING_SCHED - 0x%lx - dest 0x%lx, val 0x%lx, bit %d, size %d, pending_in %d, pending_out %d, pending_total %d\n", \ | |
234 | (unsigned long) cia, (unsigned long) &(DEST), \ | |
235 | (unsigned long) (VAL), (BIT), (int) sizeof (DEST),\ | |
236 | PENDING_IN, PENDING_OUT, PENDING_TOTAL); \ | |
237 | PENDING_SLOT_DELAY[PENDING_IN] = (DELAY) + 1; \ | |
238 | PENDING_SLOT_DEST[PENDING_IN] = &(DEST); \ | |
239 | PENDING_SLOT_VALUE[PENDING_IN] = (VAL); \ | |
240 | PENDING_SLOT_SIZE[PENDING_IN] = sizeof (DEST); \ | |
241 | PENDING_SLOT_BIT[PENDING_IN] = (BIT); \ | |
242 | PENDING_IN = (PENDING_IN + 1) % PSLOTS; \ | |
243 | PENDING_TOTAL += 1; \ | |
244 | } while (0) | |
245 | ||
246 | #define PENDING_WRITE(DEST,VAL,DELAY) PENDING_SCHED(DEST,VAL,DELAY,-1) | |
247 | #define PENDING_BIT(DEST,VAL,DELAY,BIT) PENDING_SCHED(DEST,VAL,DELAY,BIT) | |
248 | ||
249 | #define PENDING_TICK() pending_tick (SD, CPU, cia) | |
250 | ||
251 | #define PENDING_FLUSH() abort () /* think about this one */ | |
252 | #define PENDING_FP() abort () /* think about this one */ | |
253 | ||
254 | /* For backward compatibility */ | |
255 | #define PENDING_FILL(R,VAL) \ | |
256 | do { \ | |
257 | if ((R) >= FGRIDX && (R) < FGRIDX + NR_FGR) \ | |
258 | { \ | |
259 | PENDING_SCHED(FGR[(R) - FGRIDX], VAL, 1, -1); \ | |
260 | PENDING_SCHED(FPR_STATE[(R) - FGRIDX], fmt_uninterpreted, 1, -1); \ | |
261 | } \ | |
262 | else \ | |
263 | PENDING_SCHED(GPR[(R)], VAL, 1, -1); \ | |
264 | } while (0) | |
265 | ||
266 | ||
9e52972e FF |
267 | enum float_operation |
268 | { | |
269 | FLOP_ADD, FLOP_SUB, FLOP_MUL, FLOP_MADD, | |
270 | FLOP_MSUB, FLOP_MAX=10, FLOP_MIN, FLOP_ABS, | |
271 | FLOP_ITOF0=14, FLOP_FTOI0=18, FLOP_NEG=23 | |
272 | }; | |
273 | ||
c906108c | 274 | |
f4f1b9f1 CD |
275 | /* The internal representation of an MDMX accumulator. |
276 | Note that 24 and 48 bit accumulator elements are represented in | |
277 | 32 or 64 bits. Since the accumulators are 2's complement with | |
278 | overflow suppressed, high-order bits can be ignored in most contexts. */ | |
279 | ||
280 | typedef signed32 signed24; | |
281 | typedef signed64 signed48; | |
282 | ||
283 | typedef union { | |
284 | signed24 ob[8]; | |
285 | signed48 qh[4]; | |
286 | } MDMX_accumulator; | |
287 | ||
288 | ||
289 | /* Conventional system arguments. */ | |
290 | #define SIM_STATE sim_cpu *cpu, address_word cia | |
291 | #define SIM_ARGS CPU, cia | |
292 | ||
c906108c SS |
293 | struct _sim_cpu { |
294 | ||
295 | ||
296 | /* The following are internal simulator state variables: */ | |
297 | #define CIA_GET(CPU) ((CPU)->registers[PCIDX] + 0) | |
298 | #define CIA_SET(CPU,CIA) ((CPU)->registers[PCIDX] = (CIA)) | |
299 | address_word dspc; /* delay-slot PC */ | |
300 | #define DSPC ((CPU)->dspc) | |
301 | ||
302 | #define DELAY_SLOT(TARGET) NIA = delayslot32 (SD_, (TARGET)) | |
303 | #define NULLIFY_NEXT_INSTRUCTION() NIA = nullify_next_insn32 (SD_) | |
304 | ||
305 | ||
306 | /* State of the simulator */ | |
307 | unsigned int state; | |
308 | unsigned int dsstate; | |
309 | #define STATE ((CPU)->state) | |
310 | #define DSSTATE ((CPU)->dsstate) | |
311 | ||
312 | /* Flags in the "state" variable: */ | |
313 | #define simHALTEX (1 << 2) /* 0 = run; 1 = halt on exception */ | |
314 | #define simHALTIN (1 << 3) /* 0 = run; 1 = halt on interrupt */ | |
315 | #define simTRACE (1 << 8) /* 0 = do nothing; 1 = trace address activity */ | |
316 | #define simPCOC0 (1 << 17) /* COC[1] from current */ | |
317 | #define simPCOC1 (1 << 18) /* COC[1] from previous */ | |
318 | #define simDELAYSLOT (1 << 24) /* 0 = do nothing; 1 = delay slot entry exists */ | |
319 | #define simSKIPNEXT (1 << 25) /* 0 = do nothing; 1 = skip instruction */ | |
320 | #define simSIGINT (1 << 28) /* 0 = do nothing; 1 = SIGINT has occured */ | |
321 | #define simJALDELAYSLOT (1 << 29) /* 1 = in jal delay slot */ | |
322 | ||
fb891446 | 323 | #ifndef ENGINE_ISSUE_PREFIX_HOOK |
c906108c SS |
324 | #define ENGINE_ISSUE_PREFIX_HOOK() \ |
325 | { \ | |
326 | /* Perform any pending writes */ \ | |
327 | PENDING_TICK(); \ | |
328 | /* Set previous flag, depending on current: */ \ | |
329 | if (STATE & simPCOC0) \ | |
330 | STATE |= simPCOC1; \ | |
331 | else \ | |
332 | STATE &= ~simPCOC1; \ | |
333 | /* and update the current value: */ \ | |
334 | if (GETFCC(0)) \ | |
335 | STATE |= simPCOC0; \ | |
336 | else \ | |
337 | STATE &= ~simPCOC0; \ | |
338 | } | |
fb891446 | 339 | #endif /* ENGINE_ISSUE_PREFIX_HOOK */ |
c906108c SS |
340 | |
341 | ||
342 | /* This is nasty, since we have to rely on matching the register | |
343 | numbers used by GDB. Unfortunately, depending on the MIPS target | |
344 | GDB uses different register numbers. We cannot just include the | |
345 | relevant "gdb/tm.h" link, since GDB may not be configured before | |
346 | the sim world, and also the GDB header file requires too much other | |
347 | state. */ | |
348 | ||
349 | #ifndef TM_MIPS_H | |
350 | #define LAST_EMBED_REGNUM (89) | |
351 | #define NUM_REGS (LAST_EMBED_REGNUM + 1) | |
352 | ||
353 | ||
354 | #endif | |
355 | ||
356 | ||
c906108c SS |
357 | /* To keep this default simulator simple, and fast, we use a direct |
358 | vector of registers. The internal simulator engine then uses | |
359 | manifests to access the correct slot. */ | |
360 | ||
361 | unsigned_word registers[LAST_EMBED_REGNUM + 1]; | |
362 | ||
363 | int register_widths[NUM_REGS]; | |
364 | #define REGISTERS ((CPU)->registers) | |
365 | ||
366 | #define GPR (®ISTERS[0]) | |
367 | #define GPR_SET(N,VAL) (REGISTERS[(N)] = (VAL)) | |
368 | ||
369 | /* While space is allocated for the floating point registers in the | |
370 | main registers array, they are stored separatly. This is because | |
371 | their size may not necessarily match the size of either the | |
372 | general-purpose or system specific registers */ | |
373 | #define NR_FGR (32) | |
374 | #define FGRIDX (38) | |
375 | fp_word fgr[NR_FGR]; | |
376 | #define FGR ((CPU)->fgr) | |
377 | ||
378 | #define LO (REGISTERS[33]) | |
379 | #define HI (REGISTERS[34]) | |
380 | #define PCIDX 37 | |
381 | #define PC (REGISTERS[PCIDX]) | |
382 | #define CAUSE (REGISTERS[36]) | |
383 | #define SRIDX (32) | |
384 | #define SR (REGISTERS[SRIDX]) /* CPU status register */ | |
385 | #define FCR0IDX (71) | |
386 | #define FCR0 (REGISTERS[FCR0IDX]) /* really a 32bit register */ | |
387 | #define FCR31IDX (70) | |
388 | #define FCR31 (REGISTERS[FCR31IDX]) /* really a 32bit register */ | |
389 | #define FCSR (FCR31) | |
390 | #define Debug (REGISTERS[86]) | |
391 | #define DEPC (REGISTERS[87]) | |
392 | #define EPC (REGISTERS[88]) | |
c906108c SS |
393 | |
394 | /* All internal state modified by signal_exception() that may need to be | |
395 | rolled back for passing moment-of-exception image back to gdb. */ | |
396 | unsigned_word exc_trigger_registers[LAST_EMBED_REGNUM + 1]; | |
397 | unsigned_word exc_suspend_registers[LAST_EMBED_REGNUM + 1]; | |
398 | int exc_suspended; | |
399 | ||
400 | #define SIM_CPU_EXCEPTION_TRIGGER(SD,CPU,CIA) mips_cpu_exception_trigger(SD,CPU,CIA) | |
401 | #define SIM_CPU_EXCEPTION_SUSPEND(SD,CPU,EXC) mips_cpu_exception_suspend(SD,CPU,EXC) | |
402 | #define SIM_CPU_EXCEPTION_RESUME(SD,CPU,EXC) mips_cpu_exception_resume(SD,CPU,EXC) | |
403 | ||
404 | unsigned_word c0_config_reg; | |
405 | #define C0_CONFIG ((CPU)->c0_config_reg) | |
406 | ||
407 | /* The following are pseudonyms for standard registers */ | |
408 | #define ZERO (REGISTERS[0]) | |
409 | #define V0 (REGISTERS[2]) | |
410 | #define A0 (REGISTERS[4]) | |
411 | #define A1 (REGISTERS[5]) | |
412 | #define A2 (REGISTERS[6]) | |
413 | #define A3 (REGISTERS[7]) | |
414 | #define T8IDX 24 | |
415 | #define T8 (REGISTERS[T8IDX]) | |
416 | #define SPIDX 29 | |
417 | #define SP (REGISTERS[SPIDX]) | |
418 | #define RAIDX 31 | |
419 | #define RA (REGISTERS[RAIDX]) | |
420 | ||
421 | /* While space is allocated in the main registers arrray for some of | |
422 | the COP0 registers, that space isn't sufficient. Unknown COP0 | |
423 | registers overflow into the array below */ | |
424 | ||
425 | #define NR_COP0_GPR 32 | |
426 | unsigned_word cop0_gpr[NR_COP0_GPR]; | |
427 | #define COP0_GPR ((CPU)->cop0_gpr) | |
428 | #define COP0_BADVADDR ((unsigned32)(COP0_GPR[8])) | |
429 | ||
430 | /* Keep the current format state for each register: */ | |
431 | FP_formats fpr_state[32]; | |
432 | #define FPR_STATE ((CPU)->fpr_state) | |
433 | ||
434 | pending_write_queue pending; | |
435 | ||
f4f1b9f1 CD |
436 | /* The MDMX accumulator (used only for MDMX ASE). */ |
437 | MDMX_accumulator acc; | |
438 | #define ACC ((CPU)->acc) | |
439 | ||
c906108c SS |
440 | /* LLBIT = Load-Linked bit. A bit of "virtual" state used by atomic |
441 | read-write instructions. It is set when a linked load occurs. It | |
442 | is tested and cleared by the conditional store. It is cleared | |
443 | (during other CPU operations) when a store to the location would | |
444 | no longer be atomic. In particular, it is cleared by exception | |
445 | return instructions. */ | |
446 | int llbit; | |
447 | #define LLBIT ((CPU)->llbit) | |
448 | ||
449 | ||
450 | /* The HIHISTORY and LOHISTORY timestamps are used to ensure that | |
451 | corruptions caused by using the HI or LO register too close to a | |
452 | following operation is spotted. See mips.igen for more details. */ | |
453 | ||
454 | hilo_history hi_history; | |
455 | #define HIHISTORY (&(CPU)->hi_history) | |
456 | hilo_history lo_history; | |
457 | #define LOHISTORY (&(CPU)->lo_history) | |
458 | ||
459 | #define check_branch_bug() | |
460 | #define mark_branch_bug(TARGET) | |
461 | ||
462 | ||
463 | ||
464 | sim_cpu_base base; | |
465 | }; | |
466 | ||
467 | ||
468 | /* MIPS specific simulator watch config */ | |
469 | ||
470 | void watch_options_install PARAMS ((SIM_DESC sd)); | |
471 | ||
472 | struct swatch { | |
473 | sim_event *pc; | |
474 | sim_event *clock; | |
475 | sim_event *cycles; | |
476 | }; | |
477 | ||
478 | ||
479 | /* FIXME: At present much of the simulator is still static */ | |
480 | struct sim_state { | |
481 | ||
482 | struct swatch watch; | |
483 | ||
484 | sim_cpu cpu[MAX_NR_PROCESSORS]; | |
485 | #if (WITH_SMP) | |
486 | #define STATE_CPU(sd,n) (&(sd)->cpu[n]) | |
487 | #else | |
488 | #define STATE_CPU(sd,n) (&(sd)->cpu[0]) | |
489 | #endif | |
490 | ||
491 | ||
492 | sim_state_base base; | |
493 | }; | |
494 | ||
495 | ||
496 | ||
497 | /* Status information: */ | |
498 | ||
499 | /* TODO : these should be the bitmasks for these bits within the | |
500 | status register. At the moment the following are VR4300 | |
501 | bit-positions: */ | |
502 | #define status_KSU_mask (0x18) /* mask for KSU bits */ | |
503 | #define status_KSU_shift (3) /* shift for field */ | |
504 | #define ksu_kernel (0x0) | |
505 | #define ksu_supervisor (0x1) | |
506 | #define ksu_user (0x2) | |
507 | #define ksu_unknown (0x3) | |
508 | ||
509 | #define SR_KSU ((SR & status_KSU_mask) >> status_KSU_shift) | |
510 | ||
511 | #define status_IE (1 << 0) /* Interrupt enable */ | |
512 | #define status_EIE (1 << 16) /* Enable Interrupt Enable */ | |
513 | #define status_EXL (1 << 1) /* Exception level */ | |
514 | #define status_RE (1 << 25) /* Reverse Endian in user mode */ | |
515 | #define status_FR (1 << 26) /* enables MIPS III additional FP registers */ | |
516 | #define status_SR (1 << 20) /* soft reset or NMI */ | |
517 | #define status_BEV (1 << 22) /* Location of general exception vectors */ | |
518 | #define status_TS (1 << 21) /* TLB shutdown has occurred */ | |
519 | #define status_ERL (1 << 2) /* Error level */ | |
520 | #define status_IM7 (1 << 15) /* Timer Interrupt Mask */ | |
521 | #define status_RP (1 << 27) /* Reduced Power mode */ | |
522 | ||
523 | /* Specializations for TX39 family */ | |
524 | #define status_IEc (1 << 0) /* Interrupt enable (current) */ | |
525 | #define status_KUc (1 << 1) /* Kernel/User mode */ | |
526 | #define status_IEp (1 << 2) /* Interrupt enable (previous) */ | |
527 | #define status_KUp (1 << 3) /* Kernel/User mode */ | |
528 | #define status_IEo (1 << 4) /* Interrupt enable (old) */ | |
529 | #define status_KUo (1 << 5) /* Kernel/User mode */ | |
530 | #define status_IM_mask (0xff) /* Interrupt mask */ | |
531 | #define status_IM_shift (8) | |
532 | #define status_NMI (1 << 20) /* NMI */ | |
533 | #define status_NMI (1 << 20) /* NMI */ | |
534 | ||
d35d4f70 CD |
535 | /* Status bits used by MIPS32/MIPS64. */ |
536 | #define status_UX (1 << 5) /* 64-bit user addrs */ | |
537 | #define status_SX (1 << 6) /* 64-bit supervisor addrs */ | |
538 | #define status_KX (1 << 7) /* 64-bit kernel addrs */ | |
539 | #define status_TS (1 << 21) /* TLB shutdown has occurred */ | |
540 | #define status_PX (1 << 23) /* Enable 64 bit operations */ | |
541 | #define status_MX (1 << 24) /* Enable MDMX resources */ | |
542 | #define status_CU0 (1 << 28) /* Coprocessor 0 usable */ | |
543 | #define status_CU1 (1 << 29) /* Coprocessor 1 usable */ | |
544 | #define status_CU2 (1 << 30) /* Coprocessor 2 usable */ | |
545 | #define status_CU3 (1 << 31) /* Coprocessor 3 usable */ | |
7cbea089 CD |
546 | /* Bits reserved for implementations: */ |
547 | #define status_SBX (1 << 16) /* Enable SiByte SB-1 extensions. */ | |
d35d4f70 | 548 | |
c906108c SS |
549 | #define cause_BD ((unsigned)1 << 31) /* L1 Exception in branch delay slot */ |
550 | #define cause_BD2 (1 << 30) /* L2 Exception in branch delay slot */ | |
551 | #define cause_CE_mask 0x30000000 /* Coprocessor exception */ | |
552 | #define cause_CE_shift 28 | |
553 | #define cause_EXC2_mask 0x00070000 | |
554 | #define cause_EXC2_shift 16 | |
555 | #define cause_IP7 (1 << 15) /* Interrupt pending */ | |
556 | #define cause_SIOP (1 << 12) /* SIO pending */ | |
557 | #define cause_IP3 (1 << 11) /* Int 0 pending */ | |
558 | #define cause_IP2 (1 << 10) /* Int 1 pending */ | |
559 | ||
560 | #define cause_EXC_mask (0x1c) /* Exception code */ | |
561 | #define cause_EXC_shift (2) | |
562 | ||
563 | #define cause_SW0 (1 << 8) /* Software interrupt 0 */ | |
564 | #define cause_SW1 (1 << 9) /* Software interrupt 1 */ | |
565 | #define cause_IP_mask (0x3f) /* Interrupt pending field */ | |
566 | #define cause_IP_shift (10) | |
567 | ||
568 | #define cause_set_EXC(x) CAUSE = (CAUSE & ~cause_EXC_mask) | ((x << cause_EXC_shift) & cause_EXC_mask) | |
569 | #define cause_set_EXC2(x) CAUSE = (CAUSE & ~cause_EXC2_mask) | ((x << cause_EXC2_shift) & cause_EXC2_mask) | |
570 | ||
571 | ||
572 | /* NOTE: We keep the following status flags as bit values (1 for true, | |
573 | 0 for false). This allows them to be used in binary boolean | |
574 | operations without worrying about what exactly the non-zero true | |
575 | value is. */ | |
576 | ||
577 | /* UserMode */ | |
578 | #ifdef SUBTARGET_R3900 | |
579 | #define UserMode ((SR & status_KUc) ? 1 : 0) | |
580 | #else | |
581 | #define UserMode ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0) | |
582 | #endif /* SUBTARGET_R3900 */ | |
583 | ||
584 | /* BigEndianMem */ | |
585 | /* Hardware configuration. Affects endianness of LoadMemory and | |
586 | StoreMemory and the endianness of Kernel and Supervisor mode | |
587 | execution. The value is 0 for little-endian; 1 for big-endian. */ | |
588 | #define BigEndianMem (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN) | |
589 | /*(state & simBE) ? 1 : 0)*/ | |
590 | ||
591 | /* ReverseEndian */ | |
592 | /* This mode is selected if in User mode with the RE bit being set in | |
593 | SR (Status Register). It reverses the endianness of load and store | |
594 | instructions. */ | |
595 | #define ReverseEndian (((SR & status_RE) && UserMode) ? 1 : 0) | |
596 | ||
597 | /* BigEndianCPU */ | |
598 | /* The endianness for load and store instructions (0=little;1=big). In | |
599 | User mode this endianness may be switched by setting the state_RE | |
600 | bit in the SR register. Thus, BigEndianCPU may be computed as | |
601 | (BigEndianMem EOR ReverseEndian). */ | |
602 | #define BigEndianCPU (BigEndianMem ^ ReverseEndian) /* Already bits */ | |
603 | ||
604 | ||
605 | ||
606 | /* Exceptions: */ | |
607 | ||
608 | /* NOTE: These numbers depend on the processor architecture being | |
609 | simulated: */ | |
610 | enum ExceptionCause { | |
611 | Interrupt = 0, | |
612 | TLBModification = 1, | |
613 | TLBLoad = 2, | |
614 | TLBStore = 3, | |
615 | AddressLoad = 4, | |
616 | AddressStore = 5, | |
617 | InstructionFetch = 6, | |
618 | DataReference = 7, | |
619 | SystemCall = 8, | |
620 | BreakPoint = 9, | |
621 | ReservedInstruction = 10, | |
622 | CoProcessorUnusable = 11, | |
623 | IntegerOverflow = 12, /* Arithmetic overflow (IDT monitor raises SIGFPE) */ | |
624 | Trap = 13, | |
625 | FPE = 15, | |
d35d4f70 CD |
626 | DebugBreakPoint = 16, /* Impl. dep. in MIPS32/MIPS64. */ |
627 | MDMX = 22, | |
c906108c | 628 | Watch = 23, |
d35d4f70 CD |
629 | MCheck = 24, |
630 | CacheErr = 30, | |
631 | NMIReset = 31, /* Reserved in MIPS32/MIPS64. */ | |
c906108c SS |
632 | |
633 | ||
634 | /* The following exception code is actually private to the simulator | |
635 | world. It is *NOT* a processor feature, and is used to signal | |
636 | run-time errors in the simulator. */ | |
637 | SimulatorFault = 0xFFFFFFFF | |
638 | }; | |
639 | ||
640 | #define TLB_REFILL (0) | |
641 | #define TLB_INVALID (1) | |
642 | ||
643 | ||
644 | /* The following break instructions are reserved for use by the | |
645 | simulator. The first is used to halt the simulation. The second | |
646 | is used by gdb for break-points. NOTE: Care must be taken, since | |
647 | this value may be used in later revisions of the MIPS ISA. */ | |
648 | #define HALT_INSTRUCTION_MASK (0x03FFFFC0) | |
649 | ||
650 | #define HALT_INSTRUCTION (0x03ff000d) | |
651 | #define HALT_INSTRUCTION2 (0x0000ffcd) | |
652 | ||
653 | ||
654 | #define BREAKPOINT_INSTRUCTION (0x0005000d) | |
655 | #define BREAKPOINT_INSTRUCTION2 (0x0000014d) | |
656 | ||
657 | ||
658 | ||
659 | void interrupt_event (SIM_DESC sd, void *data); | |
660 | ||
661 | void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exception, ...); | |
662 | #define SignalException(exc,instruction) signal_exception (SD, CPU, cia, (exc), (instruction)) | |
663 | #define SignalExceptionInterrupt(level) signal_exception (SD, CPU, cia, Interrupt, level) | |
664 | #define SignalExceptionInstructionFetch() signal_exception (SD, CPU, cia, InstructionFetch) | |
665 | #define SignalExceptionAddressStore() signal_exception (SD, CPU, cia, AddressStore) | |
666 | #define SignalExceptionAddressLoad() signal_exception (SD, CPU, cia, AddressLoad) | |
667 | #define SignalExceptionDataReference() signal_exception (SD, CPU, cia, DataReference) | |
668 | #define SignalExceptionSimulatorFault(buf) signal_exception (SD, CPU, cia, SimulatorFault, buf) | |
669 | #define SignalExceptionFPE() signal_exception (SD, CPU, cia, FPE) | |
670 | #define SignalExceptionIntegerOverflow() signal_exception (SD, CPU, cia, IntegerOverflow) | |
3ad6f714 | 671 | #define SignalExceptionCoProcessorUnusable(cop) signal_exception (SD, CPU, cia, CoProcessorUnusable) |
c906108c SS |
672 | #define SignalExceptionNMIReset() signal_exception (SD, CPU, cia, NMIReset) |
673 | #define SignalExceptionTLBRefillStore() signal_exception (SD, CPU, cia, TLBStore, TLB_REFILL) | |
674 | #define SignalExceptionTLBRefillLoad() signal_exception (SD, CPU, cia, TLBLoad, TLB_REFILL) | |
675 | #define SignalExceptionTLBInvalidStore() signal_exception (SD, CPU, cia, TLBStore, TLB_INVALID) | |
676 | #define SignalExceptionTLBInvalidLoad() signal_exception (SD, CPU, cia, TLBLoad, TLB_INVALID) | |
677 | #define SignalExceptionTLBModification() signal_exception (SD, CPU, cia, TLBModification) | |
d35d4f70 CD |
678 | #define SignalExceptionMDMX() signal_exception (SD, CPU, cia, MDMX) |
679 | #define SignalExceptionWatch() signal_exception (SD, CPU, cia, Watch) | |
680 | #define SignalExceptionMCheck() signal_exception (SD, CPU, cia, MCheck) | |
681 | #define SignalExceptionCacheErr() signal_exception (SD, CPU, cia, CacheErr) | |
c906108c SS |
682 | |
683 | /* Co-processor accesses */ | |
684 | ||
3ad6f714 CD |
685 | /* XXX FIXME: For now, assume that FPU (cp1) is always usable. */ |
686 | #define COP_Usable(coproc_num) (coproc_num == 1) | |
687 | ||
c906108c SS |
688 | void cop_lw PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, unsigned int memword)); |
689 | void cop_ld PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, uword64 memword)); | |
690 | unsigned int cop_sw PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg)); | |
691 | uword64 cop_sd PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg)); | |
692 | ||
693 | #define COP_LW(coproc_num,coproc_reg,memword) \ | |
694 | cop_lw (SD, CPU, cia, coproc_num, coproc_reg, memword) | |
695 | #define COP_LD(coproc_num,coproc_reg,memword) \ | |
696 | cop_ld (SD, CPU, cia, coproc_num, coproc_reg, memword) | |
697 | #define COP_SW(coproc_num,coproc_reg) \ | |
698 | cop_sw (SD, CPU, cia, coproc_num, coproc_reg) | |
699 | #define COP_SD(coproc_num,coproc_reg) \ | |
700 | cop_sd (SD, CPU, cia, coproc_num, coproc_reg) | |
701 | ||
702 | ||
703 | void decode_coproc PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int instruction)); | |
704 | #define DecodeCoproc(instruction) \ | |
705 | decode_coproc (SD, CPU, cia, (instruction)) | |
706 | ||
8030f857 | 707 | int sim_monitor (SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int arg); |
c906108c SS |
708 | |
709 | ||
18d8a52d CD |
710 | /* FPR access. */ |
711 | unsigned64 value_fpr (SIM_STATE, int fpr, FP_formats); | |
712 | #define ValueFPR(FPR,FMT) value_fpr (SIM_ARGS, (FPR), (FMT)) | |
713 | void store_fpr (SIM_STATE, int fpr, FP_formats fmt, unsigned64 value); | |
714 | #define StoreFPR(FPR,FMT,VALUE) store_fpr (SIM_ARGS, (FPR), (FMT), (VALUE)) | |
715 | ||
716 | ||
717 | /* FPU operations. */ | |
718 | int NaN (unsigned64 op, FP_formats fmt); | |
18d8a52d CD |
719 | int Less (unsigned64 op1, unsigned64 op2, FP_formats fmt); |
720 | int Equal (unsigned64 op1, unsigned64 op2, FP_formats fmt); | |
ba46ddd0 CD |
721 | unsigned64 fp_abs (SIM_STATE, unsigned64 op, FP_formats fmt); |
722 | #define AbsoluteValue(op,fmt) fp_abs(SIM_ARGS, op, fmt) | |
723 | unsigned64 fp_neg (SIM_STATE, unsigned64 op, FP_formats fmt); | |
724 | #define Negate(op,fmt) fp_neg(SIM_ARGS, op, fmt) | |
725 | unsigned64 fp_add (SIM_STATE, unsigned64 op1, unsigned64 op2, FP_formats fmt); | |
726 | #define Add(op1,op2,fmt) fp_add(SIM_ARGS, op1, op2, fmt) | |
727 | unsigned64 fp_sub (SIM_STATE, unsigned64 op1, unsigned64 op2, FP_formats fmt); | |
728 | #define Sub(op1,op2,fmt) fp_sub(SIM_ARGS, op1, op2, fmt) | |
729 | unsigned64 fp_mul (SIM_STATE, unsigned64 op1, unsigned64 op2, FP_formats fmt); | |
730 | #define Multiply(op1,op2,fmt) fp_mul(SIM_ARGS, op1, op2, fmt) | |
731 | unsigned64 fp_div (SIM_STATE, unsigned64 op1, unsigned64 op2, FP_formats fmt); | |
732 | #define Divide(op1,op2,fmt) fp_div(SIM_ARGS, op1, op2, fmt) | |
733 | unsigned64 fp_recip (SIM_STATE, unsigned64 op, FP_formats fmt); | |
734 | #define Recip(op,fmt) fp_recip(SIM_ARGS, op, fmt) | |
735 | unsigned64 fp_sqrt (SIM_STATE, unsigned64 op, FP_formats fmt); | |
736 | #define SquareRoot(op,fmt) fp_sqrt(SIM_ARGS, op, fmt) | |
18d8a52d CD |
737 | unsigned64 convert (SIM_STATE, int rm, unsigned64 op, FP_formats from, FP_formats to); |
738 | #define Convert(rm,op,from,to) convert (SIM_ARGS, rm, op, from, to) | |
739 | ||
740 | ||
f4f1b9f1 CD |
741 | /* MDMX access. */ |
742 | ||
743 | typedef unsigned int MX_fmtsel; /* MDMX format select field (5 bits). */ | |
744 | #define ob_fmtsel(sel) (((sel)<<1)|0x0) | |
745 | #define qh_fmtsel(sel) (((sel)<<2)|0x1) | |
746 | ||
747 | #define fmt_mdmx fmt_uninterpreted | |
748 | ||
749 | #define MX_VECT_AND (0) | |
750 | #define MX_VECT_NOR (1) | |
751 | #define MX_VECT_OR (2) | |
752 | #define MX_VECT_XOR (3) | |
753 | #define MX_VECT_SLL (4) | |
754 | #define MX_VECT_SRL (5) | |
f4f1b9f1 CD |
755 | #define MX_VECT_ADD (6) |
756 | #define MX_VECT_SUB (7) | |
757 | #define MX_VECT_MIN (8) | |
758 | #define MX_VECT_MAX (9) | |
759 | #define MX_VECT_MUL (10) | |
760 | #define MX_VECT_MSGN (11) | |
761 | #define MX_VECT_SRA (12) | |
7cbea089 CD |
762 | #define MX_VECT_ABSD (13) /* SB-1 only. */ |
763 | #define MX_VECT_AVG (14) /* SB-1 only. */ | |
f4f1b9f1 CD |
764 | |
765 | unsigned64 mdmx_cpr_op (SIM_STATE, int op, unsigned64 op1, int vt, MX_fmtsel fmtsel); | |
766 | #define MX_Add(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_ADD, op1, vt, fmtsel) | |
767 | #define MX_And(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_AND, op1, vt, fmtsel) | |
768 | #define MX_Max(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_MAX, op1, vt, fmtsel) | |
769 | #define MX_Min(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_MIN, op1, vt, fmtsel) | |
770 | #define MX_Msgn(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_MSGN, op1, vt, fmtsel) | |
771 | #define MX_Mul(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_MUL, op1, vt, fmtsel) | |
772 | #define MX_Nor(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_NOR, op1, vt, fmtsel) | |
773 | #define MX_Or(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_OR, op1, vt, fmtsel) | |
774 | #define MX_ShiftLeftLogical(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_SLL, op1, vt, fmtsel) | |
775 | #define MX_ShiftRightArith(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_SRA, op1, vt, fmtsel) | |
776 | #define MX_ShiftRightLogical(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_SRL, op1, vt, fmtsel) | |
777 | #define MX_Sub(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_SUB, op1, vt, fmtsel) | |
778 | #define MX_Xor(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_XOR, op1, vt, fmtsel) | |
7cbea089 CD |
779 | #define MX_AbsDiff(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_ABSD, op1, vt, fmtsel) |
780 | #define MX_Avg(op1,vt,fmtsel) mdmx_cpr_op(SIM_ARGS, MX_VECT_AVG, op1, vt, fmtsel) | |
f4f1b9f1 CD |
781 | |
782 | #define MX_C_EQ 0x1 | |
783 | #define MX_C_LT 0x4 | |
784 | ||
785 | void mdmx_cc_op (SIM_STATE, int cond, unsigned64 op1, int vt, MX_fmtsel fmtsel); | |
786 | #define MX_Comp(op1,cond,vt,fmtsel) mdmx_cc_op(SIM_ARGS, cond, op1, vt, fmtsel) | |
787 | ||
788 | unsigned64 mdmx_pick_op (SIM_STATE, int tf, unsigned64 op1, int vt, MX_fmtsel fmtsel); | |
789 | #define MX_Pick(tf,op1,vt,fmtsel) mdmx_pick_op(SIM_ARGS, tf, op1, vt, fmtsel) | |
790 | ||
791 | #define MX_VECT_ADDA (0) | |
792 | #define MX_VECT_ADDL (1) | |
793 | #define MX_VECT_MULA (2) | |
794 | #define MX_VECT_MULL (3) | |
795 | #define MX_VECT_MULS (4) | |
796 | #define MX_VECT_MULSL (5) | |
797 | #define MX_VECT_SUBA (6) | |
798 | #define MX_VECT_SUBL (7) | |
7cbea089 | 799 | #define MX_VECT_ABSDA (8) /* SB-1 only. */ |
f4f1b9f1 CD |
800 | |
801 | void mdmx_acc_op (SIM_STATE, int op, unsigned64 op1, int vt, MX_fmtsel fmtsel); | |
802 | #define MX_AddA(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_ADDA, op1, vt, fmtsel) | |
803 | #define MX_AddL(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_ADDL, op1, vt, fmtsel) | |
804 | #define MX_MulA(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_MULA, op1, vt, fmtsel) | |
805 | #define MX_MulL(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_MULL, op1, vt, fmtsel) | |
806 | #define MX_MulS(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_MULS, op1, vt, fmtsel) | |
807 | #define MX_MulSL(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_MULSL, op1, vt, fmtsel) | |
808 | #define MX_SubA(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_SUBA, op1, vt, fmtsel) | |
809 | #define MX_SubL(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_SUBL, op1, vt, fmtsel) | |
7cbea089 | 810 | #define MX_AbsDiffC(op1,vt,fmtsel) mdmx_acc_op(SIM_ARGS, MX_VECT_ABSDA, op1, vt, fmtsel) |
f4f1b9f1 CD |
811 | |
812 | #define MX_FMT_OB (0) | |
813 | #define MX_FMT_QH (1) | |
814 | ||
815 | /* The following codes chosen to indicate the units of shift. */ | |
816 | #define MX_RAC_L (0) | |
817 | #define MX_RAC_M (1) | |
818 | #define MX_RAC_H (2) | |
819 | ||
820 | unsigned64 mdmx_rac_op (SIM_STATE, int, int); | |
821 | #define MX_RAC(op,fmt) mdmx_rac_op(SIM_ARGS, op, fmt) | |
822 | ||
823 | void mdmx_wacl (SIM_STATE, int, unsigned64, unsigned64); | |
824 | #define MX_WACL(fmt,vs,vt) mdmx_wacl(SIM_ARGS, fmt, vs, vt) | |
825 | void mdmx_wach (SIM_STATE, int, unsigned64); | |
826 | #define MX_WACH(fmt,vs) mdmx_wach(SIM_ARGS, fmt, vs) | |
827 | ||
828 | #define MX_RND_AS (0) | |
829 | #define MX_RND_AU (1) | |
830 | #define MX_RND_ES (2) | |
831 | #define MX_RND_EU (3) | |
832 | #define MX_RND_ZS (4) | |
833 | #define MX_RND_ZU (5) | |
834 | ||
835 | unsigned64 mdmx_round_op (SIM_STATE, int, int, MX_fmtsel); | |
836 | #define MX_RNAS(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_AS, vt, fmt) | |
837 | #define MX_RNAU(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_AU, vt, fmt) | |
838 | #define MX_RNES(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_ES, vt, fmt) | |
839 | #define MX_RNEU(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_EU, vt, fmt) | |
840 | #define MX_RZS(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_ZS, vt, fmt) | |
841 | #define MX_RZU(vt,fmt) mdmx_round_op(SIM_ARGS, MX_RND_ZU, vt, fmt) | |
842 | ||
843 | unsigned64 mdmx_shuffle (SIM_STATE, int, unsigned64, unsigned64); | |
844 | #define MX_SHFL(shop,op1,op2) mdmx_shuffle(SIM_ARGS, shop, op1, op2) | |
845 | ||
846 | ||
c906108c SS |
847 | |
848 | /* Memory accesses */ | |
849 | ||
850 | /* The following are generic to all versions of the MIPS architecture | |
851 | to date: */ | |
852 | ||
853 | /* Memory Access Types (for CCA): */ | |
854 | #define Uncached (0) | |
855 | #define CachedNoncoherent (1) | |
856 | #define CachedCoherent (2) | |
857 | #define Cached (3) | |
858 | ||
859 | #define isINSTRUCTION (1 == 0) /* FALSE */ | |
860 | #define isDATA (1 == 1) /* TRUE */ | |
861 | #define isLOAD (1 == 0) /* FALSE */ | |
862 | #define isSTORE (1 == 1) /* TRUE */ | |
863 | #define isREAL (1 == 0) /* FALSE */ | |
864 | #define isRAW (1 == 1) /* TRUE */ | |
865 | /* The parameter HOST (isTARGET / isHOST) is ignored */ | |
866 | #define isTARGET (1 == 0) /* FALSE */ | |
867 | /* #define isHOST (1 == 1) TRUE */ | |
868 | ||
869 | /* The "AccessLength" specifications for Loads and Stores. NOTE: This | |
870 | is the number of bytes minus 1. */ | |
871 | #define AccessLength_BYTE (0) | |
872 | #define AccessLength_HALFWORD (1) | |
873 | #define AccessLength_TRIPLEBYTE (2) | |
874 | #define AccessLength_WORD (3) | |
875 | #define AccessLength_QUINTIBYTE (4) | |
876 | #define AccessLength_SEXTIBYTE (5) | |
877 | #define AccessLength_SEPTIBYTE (6) | |
878 | #define AccessLength_DOUBLEWORD (7) | |
879 | #define AccessLength_QUADWORD (15) | |
880 | ||
881 | #define LOADDRMASK (WITH_TARGET_WORD_BITSIZE == 64 \ | |
882 | ? AccessLength_DOUBLEWORD /*7*/ \ | |
883 | : AccessLength_WORD /*3*/) | |
884 | #define PSIZE (WITH_TARGET_ADDRESS_BITSIZE) | |
885 | ||
886 | ||
887 | INLINE_SIM_MAIN (int) address_translation PARAMS ((SIM_DESC sd, sim_cpu *, address_word cia, address_word vAddr, int IorD, int LorS, address_word *pAddr, int *CCA, int raw)); | |
888 | #define AddressTranslation(vAddr,IorD,LorS,pAddr,CCA,host,raw) \ | |
889 | address_translation (SD, CPU, cia, vAddr, IorD, LorS, pAddr, CCA, raw) | |
890 | ||
891 | INLINE_SIM_MAIN (void) load_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, uword64* memvalp, uword64* memval1p, int CCA, unsigned int AccessLength, address_word pAddr, address_word vAddr, int IorD)); | |
892 | #define LoadMemory(memvalp,memval1p,CCA,AccessLength,pAddr,vAddr,IorD,raw) \ | |
893 | load_memory (SD, CPU, cia, memvalp, memval1p, CCA, AccessLength, pAddr, vAddr, IorD) | |
894 | ||
895 | INLINE_SIM_MAIN (void) store_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int CCA, unsigned int AccessLength, uword64 MemElem, uword64 MemElem1, address_word pAddr, address_word vAddr)); | |
896 | #define StoreMemory(CCA,AccessLength,MemElem,MemElem1,pAddr,vAddr,raw) \ | |
897 | store_memory (SD, CPU, cia, CCA, AccessLength, MemElem, MemElem1, pAddr, vAddr) | |
898 | ||
899 | INLINE_SIM_MAIN (void) cache_op PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int op, address_word pAddr, address_word vAddr, unsigned int instruction)); | |
900 | #define CacheOp(op,pAddr,vAddr,instruction) \ | |
901 | cache_op (SD, CPU, cia, op, pAddr, vAddr, instruction) | |
902 | ||
903 | INLINE_SIM_MAIN (void) sync_operation PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int stype)); | |
904 | #define SyncOperation(stype) \ | |
905 | sync_operation (SD, CPU, cia, (stype)) | |
906 | ||
907 | INLINE_SIM_MAIN (void) prefetch PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int CCA, address_word pAddr, address_word vAddr, int DATA, int hint)); | |
908 | #define Prefetch(CCA,pAddr,vAddr,DATA,hint) \ | |
909 | prefetch (SD, CPU, cia, CCA, pAddr, vAddr, DATA, hint) | |
910 | ||
402586aa CD |
911 | void unpredictable_action (sim_cpu *cpu, address_word cia); |
912 | #define NotWordValue(val) not_word_value (SD_, (val)) | |
913 | #define Unpredictable() unpredictable (SD_) | |
f4f1b9f1 | 914 | #define UnpredictableResult() /* For now, do nothing. */ |
b96e7ef1 | 915 | |
c906108c SS |
916 | INLINE_SIM_MAIN (unsigned32) ifetch32 PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, address_word vaddr)); |
917 | #define IMEM32(CIA) ifetch32 (SD, CPU, (CIA), (CIA)) | |
918 | INLINE_SIM_MAIN (unsigned16) ifetch16 PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, address_word vaddr)); | |
919 | #define IMEM16(CIA) ifetch16 (SD, CPU, (CIA), ((CIA) & ~1)) | |
920 | #define IMEM16_IMMED(CIA,NR) ifetch16 (SD, CPU, (CIA), ((CIA) & ~1) + 2 * (NR)) | |
921 | ||
922 | void dotrace PARAMS ((SIM_DESC sd, sim_cpu *cpu, FILE *tracefh, int type, SIM_ADDR address, int width, char *comment, ...)); | |
923 | extern FILE *tracefh; | |
924 | ||
925 | INLINE_SIM_MAIN (void) pending_tick PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia)); | |
926 | extern SIM_CORE_SIGNAL_FN mips_core_signal; | |
927 | ||
928 | char* pr_addr PARAMS ((SIM_ADDR addr)); | |
929 | char* pr_uword64 PARAMS ((uword64 addr)); | |
930 | ||
931 | ||
4c0deff4 | 932 | #define GPR_CLEAR(N) do { GPR_SET((N),0); } while (0) |
4c0deff4 | 933 | |
c906108c SS |
934 | void mips_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word pc); |
935 | void mips_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception); | |
936 | void mips_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception); | |
937 | ||
938 | ||
939 | #if H_REVEALS_MODULE_P (SIM_MAIN_INLINE) | |
940 | #include "sim-main.c" | |
941 | #endif | |
942 | ||
943 | #endif |