[deliverable/binutils-gdb.git] / sim / testsuite / sim / mips / testutils.inc

# MIPS simulator testsuite utility functions.
# Copyright (C) 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
# Contributed by Chris Demetriou of Broadcom Corporation.
#
# This file is part of the GNU simulators.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.  */


# $1, $4, $5, %6, are used as temps by the macros defined here.

	.macro writemsg msg
	.data
901:	.ascii	"\msg\n"
902:
	.previous
	la	$5, 901b
	li	$6, 902b - 901b
	.set push
	.set noreorder
	jal	_dowrite
	li	$4, 0
	.set pop
	.endm


	# The MIPS simulator uses "break 0x3ff" as the code to exit,
	# with the return value in $4 (a0).
	.macro exit rc
	li	$4, \rc
	break	0x3ff
	.endm


	.macro setup

	.global _start
	.global __start
	.ent _start
_start:
__start:
	.set push
	.set noreorder
	j	DIAG
	nop
	.set pop
	.end _start

	.global _fail
	.ent _fail
_fail:
	writemsg "fail"
	exit 1
	.end _fail

	.global _pass
	.ent _pass
_pass:
	writemsg "pass"
	exit 0
	.end _pass

	# The MIPS simulator can use multiple different monitor types,
	# so we hard-code the simulator "write" reserved instruction opcode,
	# rather than jumping to a vector that invokes it.  The operation
	# expects RA to point to the location at which to continue
	# after writing.
	.global _dowrite
	.ent _dowrite
_dowrite:
	# Write opcode (reserved instruction).  See sim_monitor and its
	# callers in sim/mips/interp.c.
	.word	0x00000005 | ((8 << 1) << 6)
	.end _dowrite

	.endm	# setup


	.macro pass
	.set push
	.set noreorder
	j	_pass
	nop	
	.set pop
	.endm


	.macro fail
	.set push
	.set noreorder
	j	_fail
	nop	
	.set pop
	.endm


	.macro load32 reg, val
	li	\reg, \val
	.endm


	.macro load64 reg, val
	dli	\reg, \val
	.endm


	.macro loadaddr reg, addr
	la	\reg, \addr
	.endm


	.macro checkreg reg, expreg
	.set push
	.set noat
	.set noreorder
	beq	\expreg, \reg, 901f
	nop
	fail
901:
	.set pop
	.endm


	.macro check32 reg, val
	.set push
	.set noat
	load32	$1, \val
	checkreg \reg, $1
	.set pop
	.endm


	.macro check64 reg, val
	.set push
	.set noat
	load64	$1, \val
	checkreg \reg, $1
	.set pop
	.endm
Commit	Line	Data
df0a8012	1	# MIPS simulator testsuite utility functions.
dc3cf14f	2	# Copyright (C) 2004, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
df0a8012 CD	3	# Contributed by Chris Demetriou of Broadcom Corporation.
	4	#
	5	# This file is part of the GNU simulators.
	6	#
	7	# This program is free software; you can redistribute it and/or modify
	8	# it under the terms of the GNU General Public License as published by
db95e312 JB	9	# the Free Software Foundation; either version 3 of the License, or
db95e312 JB	10	# (at your option) any later version.
df0a8012 CD	11	#
	12	# This program is distributed in the hope that it will be useful,
	13	# but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	# GNU General Public License for more details.
	16	#
db95e312 JB	17	# You should have received a copy of the GNU General Public License
db95e312 JB	18	# along with this program. If not, see <http://www.gnu.org/licenses/>. */
df0a8012 CD	19
	20
	21	# $1, $4, $5, %6, are used as temps by the macros defined here.
	22
	23	.macro writemsg msg
	24	.data
	25	901: .ascii "\msg\n"
	26	902:
	27	.previous
	28	la $5, 901b
	29	li $6, 902b - 901b
	30	.set push
	31	.set noreorder
	32	jal _dowrite
	33	li $4, 0
	34	.set pop
	35	.endm
	36
	37
	38	# The MIPS simulator uses "break 0x3ff" as the code to exit,
	39	# with the return value in $4 (a0).
	40	.macro exit rc
	41	li $4, \rc
	42	break 0x3ff
	43	.endm
	44
	45
	46	.macro setup
	47
	48	.global _start
6b637da7	49	.global __start
df0a8012 CD	50	.ent _start
df0a8012 CD	51	_start:
6b637da7	52	__start:
df0a8012 CD	53	.set push
	54	.set noreorder
	55	j DIAG
	56	nop
	57	.set pop
	58	.end _start
	59
	60	.global _fail
	61	.ent _fail
	62	_fail:
	63	writemsg "fail"
	64	exit 1
	65	.end _fail
	66
	67	.global _pass
	68	.ent _pass
	69	_pass:
	70	writemsg "pass"
	71	exit 0
	72	.end _pass
	73
	74	# The MIPS simulator can use multiple different monitor types,
	75	# so we hard-code the simulator "write" reserved instruction opcode,
	76	# rather than jumping to a vector that invokes it. The operation
	77	# expects RA to point to the location at which to continue
	78	# after writing.
	79	.global _dowrite
	80	.ent _dowrite
	81	_dowrite:
	82	# Write opcode (reserved instruction). See sim_monitor and its
	83	# callers in sim/mips/interp.c.
	84	.word 0x00000005 \| ((8 << 1) << 6)
	85	.end _dowrite
	86
	87	.endm # setup
	88
	89
	90	.macro pass
	91	.set push
	92	.set noreorder
	93	j _pass
	94	nop
	95	.set pop
	96	.endm
	97
	98
	99	.macro fail
	100	.set push
	101	.set noreorder
	102	j _fail
	103	nop
	104	.set pop
	105	.endm
	106
	107
	108	.macro load32 reg, val
	109	li \reg, \val
	110	.endm
	111
	112
	113	.macro load64 reg, val
	114	dli \reg, \val
	115	.endm
	116
117
118	.macro loadaddr reg, addr
119	la \reg, \addr
120	.endm
121
122
123	.macro checkreg reg, expreg
124	.set push
125	.set noat
126	.set noreorder
127	beq \expreg, \reg, 901f
128	nop
129	fail
130	901:
131	.set pop
132	.endm
133
134
135	.macro check32 reg, val
136	.set push
137	.set noat
138	load32 $1, \val
139	checkreg \reg, $1
140	.set pop
141	.endm
142
143
144	.macro check64 reg, val
145	.set push
146	.set noat
147	load64 $1, \val
148	checkreg \reg, $1
149	.set pop
150	.endm