Commit | Line | Data |
---|---|---|
3592b7f6 OL |
1 | /* |
2 | * Copyright (C) ST-Ericsson SA 2012 | |
3 | * | |
4 | * Author: Ola Lilja <ola.o.lilja@stericsson.com>, | |
5 | * Roger Nilsson <roger.xr.nilsson@stericsson.com>, | |
6 | * Sandeep Kaushik <sandeep.kaushik@st.com> | |
7 | * for ST-Ericsson. | |
8 | * | |
9 | * License terms: | |
10 | * | |
11 | * This program is free software; you can redistribute it and/or modify | |
12 | * it under the terms of the GNU General Public License version 2 as published | |
13 | * by the Free Software Foundation. | |
14 | */ | |
15 | ||
16 | #include <linux/module.h> | |
17 | #include <linux/platform_device.h> | |
18 | #include <linux/delay.h> | |
19 | #include <linux/slab.h> | |
05304949 | 20 | #include <linux/io.h> |
49731c23 | 21 | #include <linux/of.h> |
ab0fc6ce | 22 | #include <linux/platform_data/asoc-ux500-msp.h> |
3592b7f6 | 23 | |
3592b7f6 OL |
24 | #include <sound/soc.h> |
25 | ||
26 | #include "ux500_msp_i2s.h" | |
27 | ||
28 | /* Protocol desciptors */ | |
29 | static const struct msp_protdesc prot_descs[] = { | |
30 | { /* I2S */ | |
31 | MSP_SINGLE_PHASE, | |
32 | MSP_SINGLE_PHASE, | |
33 | MSP_PHASE2_START_MODE_IMEDIATE, | |
34 | MSP_PHASE2_START_MODE_IMEDIATE, | |
35 | MSP_BTF_MS_BIT_FIRST, | |
36 | MSP_BTF_MS_BIT_FIRST, | |
37 | MSP_FRAME_LEN_1, | |
38 | MSP_FRAME_LEN_1, | |
39 | MSP_FRAME_LEN_1, | |
40 | MSP_FRAME_LEN_1, | |
41 | MSP_ELEM_LEN_32, | |
42 | MSP_ELEM_LEN_32, | |
43 | MSP_ELEM_LEN_32, | |
44 | MSP_ELEM_LEN_32, | |
45 | MSP_DELAY_1, | |
46 | MSP_DELAY_1, | |
47 | MSP_RISING_EDGE, | |
48 | MSP_FALLING_EDGE, | |
49 | MSP_FSYNC_POL_ACT_LO, | |
50 | MSP_FSYNC_POL_ACT_LO, | |
51 | MSP_SWAP_NONE, | |
52 | MSP_SWAP_NONE, | |
53 | MSP_COMPRESS_MODE_LINEAR, | |
54 | MSP_EXPAND_MODE_LINEAR, | |
55 | MSP_FSYNC_IGNORE, | |
56 | 31, | |
57 | 15, | |
58 | 32, | |
59 | }, { /* PCM */ | |
60 | MSP_DUAL_PHASE, | |
61 | MSP_DUAL_PHASE, | |
62 | MSP_PHASE2_START_MODE_FSYNC, | |
63 | MSP_PHASE2_START_MODE_FSYNC, | |
64 | MSP_BTF_MS_BIT_FIRST, | |
65 | MSP_BTF_MS_BIT_FIRST, | |
66 | MSP_FRAME_LEN_1, | |
67 | MSP_FRAME_LEN_1, | |
68 | MSP_FRAME_LEN_1, | |
69 | MSP_FRAME_LEN_1, | |
70 | MSP_ELEM_LEN_16, | |
71 | MSP_ELEM_LEN_16, | |
72 | MSP_ELEM_LEN_16, | |
73 | MSP_ELEM_LEN_16, | |
74 | MSP_DELAY_0, | |
75 | MSP_DELAY_0, | |
76 | MSP_RISING_EDGE, | |
77 | MSP_FALLING_EDGE, | |
78 | MSP_FSYNC_POL_ACT_HI, | |
79 | MSP_FSYNC_POL_ACT_HI, | |
80 | MSP_SWAP_NONE, | |
81 | MSP_SWAP_NONE, | |
82 | MSP_COMPRESS_MODE_LINEAR, | |
83 | MSP_EXPAND_MODE_LINEAR, | |
84 | MSP_FSYNC_IGNORE, | |
85 | 255, | |
86 | 0, | |
87 | 256, | |
88 | }, { /* Companded PCM */ | |
89 | MSP_SINGLE_PHASE, | |
90 | MSP_SINGLE_PHASE, | |
91 | MSP_PHASE2_START_MODE_FSYNC, | |
92 | MSP_PHASE2_START_MODE_FSYNC, | |
93 | MSP_BTF_MS_BIT_FIRST, | |
94 | MSP_BTF_MS_BIT_FIRST, | |
95 | MSP_FRAME_LEN_1, | |
96 | MSP_FRAME_LEN_1, | |
97 | MSP_FRAME_LEN_1, | |
98 | MSP_FRAME_LEN_1, | |
99 | MSP_ELEM_LEN_8, | |
100 | MSP_ELEM_LEN_8, | |
101 | MSP_ELEM_LEN_8, | |
102 | MSP_ELEM_LEN_8, | |
103 | MSP_DELAY_0, | |
104 | MSP_DELAY_0, | |
105 | MSP_RISING_EDGE, | |
106 | MSP_RISING_EDGE, | |
107 | MSP_FSYNC_POL_ACT_HI, | |
108 | MSP_FSYNC_POL_ACT_HI, | |
109 | MSP_SWAP_NONE, | |
110 | MSP_SWAP_NONE, | |
111 | MSP_COMPRESS_MODE_LINEAR, | |
112 | MSP_EXPAND_MODE_LINEAR, | |
113 | MSP_FSYNC_IGNORE, | |
114 | 255, | |
115 | 0, | |
116 | 256, | |
117 | }, | |
118 | }; | |
119 | ||
120 | static void set_prot_desc_tx(struct ux500_msp *msp, | |
121 | struct msp_protdesc *protdesc, | |
122 | enum msp_data_size data_size) | |
123 | { | |
124 | u32 temp_reg = 0; | |
125 | ||
126 | temp_reg |= MSP_P2_ENABLE_BIT(protdesc->tx_phase_mode); | |
127 | temp_reg |= MSP_P2_START_MODE_BIT(protdesc->tx_phase2_start_mode); | |
128 | temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->tx_frame_len_1); | |
129 | temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->tx_frame_len_2); | |
130 | if (msp->def_elem_len) { | |
131 | temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->tx_elem_len_1); | |
132 | temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->tx_elem_len_2); | |
133 | } else { | |
134 | temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size); | |
135 | temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size); | |
136 | } | |
137 | temp_reg |= MSP_DATA_DELAY_BITS(protdesc->tx_data_delay); | |
138 | temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->tx_byte_order); | |
139 | temp_reg |= MSP_FSYNC_POL(protdesc->tx_fsync_pol); | |
140 | temp_reg |= MSP_DATA_WORD_SWAP(protdesc->tx_half_word_swap); | |
141 | temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->compression_mode); | |
142 | temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore); | |
143 | ||
144 | writel(temp_reg, msp->registers + MSP_TCF); | |
145 | } | |
146 | ||
147 | static void set_prot_desc_rx(struct ux500_msp *msp, | |
148 | struct msp_protdesc *protdesc, | |
149 | enum msp_data_size data_size) | |
150 | { | |
151 | u32 temp_reg = 0; | |
152 | ||
153 | temp_reg |= MSP_P2_ENABLE_BIT(protdesc->rx_phase_mode); | |
154 | temp_reg |= MSP_P2_START_MODE_BIT(protdesc->rx_phase2_start_mode); | |
155 | temp_reg |= MSP_P1_FRAME_LEN_BITS(protdesc->rx_frame_len_1); | |
156 | temp_reg |= MSP_P2_FRAME_LEN_BITS(protdesc->rx_frame_len_2); | |
157 | if (msp->def_elem_len) { | |
158 | temp_reg |= MSP_P1_ELEM_LEN_BITS(protdesc->rx_elem_len_1); | |
159 | temp_reg |= MSP_P2_ELEM_LEN_BITS(protdesc->rx_elem_len_2); | |
160 | } else { | |
161 | temp_reg |= MSP_P1_ELEM_LEN_BITS(data_size); | |
162 | temp_reg |= MSP_P2_ELEM_LEN_BITS(data_size); | |
163 | } | |
164 | ||
165 | temp_reg |= MSP_DATA_DELAY_BITS(protdesc->rx_data_delay); | |
166 | temp_reg |= MSP_SET_ENDIANNES_BIT(protdesc->rx_byte_order); | |
167 | temp_reg |= MSP_FSYNC_POL(protdesc->rx_fsync_pol); | |
168 | temp_reg |= MSP_DATA_WORD_SWAP(protdesc->rx_half_word_swap); | |
169 | temp_reg |= MSP_SET_COMPANDING_MODE(protdesc->expansion_mode); | |
170 | temp_reg |= MSP_SET_FSYNC_IGNORE(protdesc->frame_sync_ignore); | |
171 | ||
172 | writel(temp_reg, msp->registers + MSP_RCF); | |
173 | } | |
174 | ||
175 | static int configure_protocol(struct ux500_msp *msp, | |
176 | struct ux500_msp_config *config) | |
177 | { | |
178 | struct msp_protdesc *protdesc; | |
179 | enum msp_data_size data_size; | |
180 | u32 temp_reg = 0; | |
181 | ||
182 | data_size = config->data_size; | |
183 | msp->def_elem_len = config->def_elem_len; | |
184 | if (config->default_protdesc == 1) { | |
185 | if (config->protocol >= MSP_INVALID_PROTOCOL) { | |
186 | dev_err(msp->dev, "%s: ERROR: Invalid protocol!\n", | |
187 | __func__); | |
188 | return -EINVAL; | |
189 | } | |
190 | protdesc = | |
191 | (struct msp_protdesc *)&prot_descs[config->protocol]; | |
192 | } else { | |
193 | protdesc = (struct msp_protdesc *)&config->protdesc; | |
194 | } | |
195 | ||
196 | if (data_size < MSP_DATA_BITS_DEFAULT || data_size > MSP_DATA_BITS_32) { | |
197 | dev_err(msp->dev, | |
198 | "%s: ERROR: Invalid data-size requested (data_size = %d)!\n", | |
199 | __func__, data_size); | |
200 | return -EINVAL; | |
201 | } | |
202 | ||
203 | if (config->direction & MSP_DIR_TX) | |
204 | set_prot_desc_tx(msp, protdesc, data_size); | |
205 | if (config->direction & MSP_DIR_RX) | |
206 | set_prot_desc_rx(msp, protdesc, data_size); | |
207 | ||
208 | /* The code below should not be separated. */ | |
209 | temp_reg = readl(msp->registers + MSP_GCR) & ~TX_CLK_POL_RISING; | |
210 | temp_reg |= MSP_TX_CLKPOL_BIT(~protdesc->tx_clk_pol); | |
211 | writel(temp_reg, msp->registers + MSP_GCR); | |
212 | temp_reg = readl(msp->registers + MSP_GCR) & ~RX_CLK_POL_RISING; | |
213 | temp_reg |= MSP_RX_CLKPOL_BIT(protdesc->rx_clk_pol); | |
214 | writel(temp_reg, msp->registers + MSP_GCR); | |
215 | ||
216 | return 0; | |
217 | } | |
218 | ||
219 | static int setup_bitclk(struct ux500_msp *msp, struct ux500_msp_config *config) | |
220 | { | |
221 | u32 reg_val_GCR; | |
222 | u32 frame_per = 0; | |
223 | u32 sck_div = 0; | |
224 | u32 frame_width = 0; | |
225 | u32 temp_reg = 0; | |
226 | struct msp_protdesc *protdesc = NULL; | |
227 | ||
228 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
229 | writel(reg_val_GCR & ~SRG_ENABLE, msp->registers + MSP_GCR); | |
230 | ||
231 | if (config->default_protdesc) | |
232 | protdesc = | |
233 | (struct msp_protdesc *)&prot_descs[config->protocol]; | |
234 | else | |
235 | protdesc = (struct msp_protdesc *)&config->protdesc; | |
236 | ||
237 | switch (config->protocol) { | |
238 | case MSP_PCM_PROTOCOL: | |
239 | case MSP_PCM_COMPAND_PROTOCOL: | |
240 | frame_width = protdesc->frame_width; | |
241 | sck_div = config->f_inputclk / (config->frame_freq * | |
242 | (protdesc->clocks_per_frame)); | |
243 | frame_per = protdesc->frame_period; | |
244 | break; | |
245 | case MSP_I2S_PROTOCOL: | |
246 | frame_width = protdesc->frame_width; | |
247 | sck_div = config->f_inputclk / (config->frame_freq * | |
248 | (protdesc->clocks_per_frame)); | |
249 | frame_per = protdesc->frame_period; | |
250 | break; | |
251 | default: | |
252 | dev_err(msp->dev, "%s: ERROR: Unknown protocol (%d)!\n", | |
253 | __func__, | |
254 | config->protocol); | |
255 | return -EINVAL; | |
256 | } | |
257 | ||
258 | temp_reg = (sck_div - 1) & SCK_DIV_MASK; | |
259 | temp_reg |= FRAME_WIDTH_BITS(frame_width); | |
260 | temp_reg |= FRAME_PERIOD_BITS(frame_per); | |
261 | writel(temp_reg, msp->registers + MSP_SRG); | |
262 | ||
263 | msp->f_bitclk = (config->f_inputclk)/(sck_div + 1); | |
264 | ||
265 | /* Enable bit-clock */ | |
266 | udelay(100); | |
267 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
268 | writel(reg_val_GCR | SRG_ENABLE, msp->registers + MSP_GCR); | |
269 | udelay(100); | |
270 | ||
271 | return 0; | |
272 | } | |
273 | ||
274 | static int configure_multichannel(struct ux500_msp *msp, | |
275 | struct ux500_msp_config *config) | |
276 | { | |
277 | struct msp_protdesc *protdesc; | |
278 | struct msp_multichannel_config *mcfg; | |
279 | u32 reg_val_MCR; | |
280 | ||
281 | if (config->default_protdesc == 1) { | |
282 | if (config->protocol >= MSP_INVALID_PROTOCOL) { | |
283 | dev_err(msp->dev, | |
284 | "%s: ERROR: Invalid protocol (%d)!\n", | |
285 | __func__, config->protocol); | |
286 | return -EINVAL; | |
287 | } | |
288 | protdesc = (struct msp_protdesc *) | |
289 | &prot_descs[config->protocol]; | |
290 | } else { | |
291 | protdesc = (struct msp_protdesc *)&config->protdesc; | |
292 | } | |
293 | ||
294 | mcfg = &config->multichannel_config; | |
295 | if (mcfg->tx_multichannel_enable) { | |
296 | if (protdesc->tx_phase_mode == MSP_SINGLE_PHASE) { | |
297 | reg_val_MCR = readl(msp->registers + MSP_MCR); | |
298 | writel(reg_val_MCR | (mcfg->tx_multichannel_enable ? | |
299 | 1 << TMCEN_BIT : 0), | |
300 | msp->registers + MSP_MCR); | |
301 | writel(mcfg->tx_channel_0_enable, | |
302 | msp->registers + MSP_TCE0); | |
303 | writel(mcfg->tx_channel_1_enable, | |
304 | msp->registers + MSP_TCE1); | |
305 | writel(mcfg->tx_channel_2_enable, | |
306 | msp->registers + MSP_TCE2); | |
307 | writel(mcfg->tx_channel_3_enable, | |
308 | msp->registers + MSP_TCE3); | |
309 | } else { | |
310 | dev_err(msp->dev, | |
311 | "%s: ERROR: Only single-phase supported (TX-mode: %d)!\n", | |
312 | __func__, protdesc->tx_phase_mode); | |
313 | return -EINVAL; | |
314 | } | |
315 | } | |
316 | if (mcfg->rx_multichannel_enable) { | |
317 | if (protdesc->rx_phase_mode == MSP_SINGLE_PHASE) { | |
318 | reg_val_MCR = readl(msp->registers + MSP_MCR); | |
319 | writel(reg_val_MCR | (mcfg->rx_multichannel_enable ? | |
320 | 1 << RMCEN_BIT : 0), | |
321 | msp->registers + MSP_MCR); | |
322 | writel(mcfg->rx_channel_0_enable, | |
323 | msp->registers + MSP_RCE0); | |
324 | writel(mcfg->rx_channel_1_enable, | |
325 | msp->registers + MSP_RCE1); | |
326 | writel(mcfg->rx_channel_2_enable, | |
327 | msp->registers + MSP_RCE2); | |
328 | writel(mcfg->rx_channel_3_enable, | |
329 | msp->registers + MSP_RCE3); | |
330 | } else { | |
331 | dev_err(msp->dev, | |
332 | "%s: ERROR: Only single-phase supported (RX-mode: %d)!\n", | |
333 | __func__, protdesc->rx_phase_mode); | |
334 | return -EINVAL; | |
335 | } | |
336 | if (mcfg->rx_comparison_enable_mode) { | |
337 | reg_val_MCR = readl(msp->registers + MSP_MCR); | |
338 | writel(reg_val_MCR | | |
339 | (mcfg->rx_comparison_enable_mode << RCMPM_BIT), | |
340 | msp->registers + MSP_MCR); | |
341 | ||
342 | writel(mcfg->comparison_mask, | |
343 | msp->registers + MSP_RCM); | |
344 | writel(mcfg->comparison_value, | |
345 | msp->registers + MSP_RCV); | |
346 | ||
347 | } | |
348 | } | |
349 | ||
350 | return 0; | |
351 | } | |
352 | ||
353 | static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config) | |
354 | { | |
6ee0b4b0 | 355 | int status = 0; |
3592b7f6 | 356 | u32 reg_val_DMACR, reg_val_GCR; |
3592b7f6 OL |
357 | |
358 | /* Configure msp with protocol dependent settings */ | |
359 | configure_protocol(msp, config); | |
360 | setup_bitclk(msp, config); | |
361 | if (config->multichannel_configured == 1) { | |
362 | status = configure_multichannel(msp, config); | |
363 | if (status) | |
364 | dev_warn(msp->dev, | |
365 | "%s: WARN: configure_multichannel failed (%d)!\n", | |
366 | __func__, status); | |
367 | } | |
368 | ||
369 | /* Make sure the correct DMA-directions are configured */ | |
f3fe53dd FB |
370 | if ((config->direction & MSP_DIR_RX) && |
371 | !msp->capture_dma_data.dma_cfg) { | |
3592b7f6 OL |
372 | dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!", |
373 | __func__); | |
374 | return -EINVAL; | |
375 | } | |
f3fe53dd FB |
376 | if ((config->direction == MSP_DIR_TX) && |
377 | !msp->playback_dma_data.dma_cfg) { | |
3592b7f6 OL |
378 | dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!", |
379 | __func__); | |
380 | return -EINVAL; | |
381 | } | |
382 | ||
383 | reg_val_DMACR = readl(msp->registers + MSP_DMACR); | |
384 | if (config->direction & MSP_DIR_RX) | |
385 | reg_val_DMACR |= RX_DMA_ENABLE; | |
386 | if (config->direction & MSP_DIR_TX) | |
387 | reg_val_DMACR |= TX_DMA_ENABLE; | |
388 | writel(reg_val_DMACR, msp->registers + MSP_DMACR); | |
389 | ||
390 | writel(config->iodelay, msp->registers + MSP_IODLY); | |
391 | ||
392 | /* Enable frame generation logic */ | |
393 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
394 | writel(reg_val_GCR | FRAME_GEN_ENABLE, msp->registers + MSP_GCR); | |
395 | ||
396 | return status; | |
397 | } | |
398 | ||
399 | static void flush_fifo_rx(struct ux500_msp *msp) | |
400 | { | |
401 | u32 reg_val_DR, reg_val_GCR, reg_val_FLR; | |
402 | u32 limit = 32; | |
403 | ||
404 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
405 | writel(reg_val_GCR | RX_ENABLE, msp->registers + MSP_GCR); | |
406 | ||
407 | reg_val_FLR = readl(msp->registers + MSP_FLR); | |
408 | while (!(reg_val_FLR & RX_FIFO_EMPTY) && limit--) { | |
409 | reg_val_DR = readl(msp->registers + MSP_DR); | |
410 | reg_val_FLR = readl(msp->registers + MSP_FLR); | |
411 | } | |
412 | ||
413 | writel(reg_val_GCR, msp->registers + MSP_GCR); | |
414 | } | |
415 | ||
416 | static void flush_fifo_tx(struct ux500_msp *msp) | |
417 | { | |
418 | u32 reg_val_TSTDR, reg_val_GCR, reg_val_FLR; | |
419 | u32 limit = 32; | |
420 | ||
421 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
422 | writel(reg_val_GCR | TX_ENABLE, msp->registers + MSP_GCR); | |
423 | writel(MSP_ITCR_ITEN | MSP_ITCR_TESTFIFO, msp->registers + MSP_ITCR); | |
424 | ||
425 | reg_val_FLR = readl(msp->registers + MSP_FLR); | |
426 | while (!(reg_val_FLR & TX_FIFO_EMPTY) && limit--) { | |
427 | reg_val_TSTDR = readl(msp->registers + MSP_TSTDR); | |
428 | reg_val_FLR = readl(msp->registers + MSP_FLR); | |
429 | } | |
430 | writel(0x0, msp->registers + MSP_ITCR); | |
431 | writel(reg_val_GCR, msp->registers + MSP_GCR); | |
432 | } | |
433 | ||
434 | int ux500_msp_i2s_open(struct ux500_msp *msp, | |
435 | struct ux500_msp_config *config) | |
436 | { | |
437 | u32 old_reg, new_reg, mask; | |
438 | int res; | |
439 | unsigned int tx_sel, rx_sel, tx_busy, rx_busy; | |
440 | ||
441 | if (in_interrupt()) { | |
442 | dev_err(msp->dev, | |
443 | "%s: ERROR: Open called in interrupt context!\n", | |
444 | __func__); | |
445 | return -1; | |
446 | } | |
447 | ||
448 | tx_sel = (config->direction & MSP_DIR_TX) > 0; | |
449 | rx_sel = (config->direction & MSP_DIR_RX) > 0; | |
450 | if (!tx_sel && !rx_sel) { | |
451 | dev_err(msp->dev, "%s: Error: No direction selected!\n", | |
452 | __func__); | |
453 | return -EINVAL; | |
454 | } | |
455 | ||
456 | tx_busy = (msp->dir_busy & MSP_DIR_TX) > 0; | |
457 | rx_busy = (msp->dir_busy & MSP_DIR_RX) > 0; | |
458 | if (tx_busy && tx_sel) { | |
459 | dev_err(msp->dev, "%s: Error: TX is in use!\n", __func__); | |
460 | return -EBUSY; | |
461 | } | |
462 | if (rx_busy && rx_sel) { | |
463 | dev_err(msp->dev, "%s: Error: RX is in use!\n", __func__); | |
464 | return -EBUSY; | |
465 | } | |
466 | ||
467 | msp->dir_busy |= (tx_sel ? MSP_DIR_TX : 0) | (rx_sel ? MSP_DIR_RX : 0); | |
468 | ||
469 | /* First do the global config register */ | |
470 | mask = RX_CLK_SEL_MASK | TX_CLK_SEL_MASK | RX_FSYNC_MASK | | |
471 | TX_FSYNC_MASK | RX_SYNC_SEL_MASK | TX_SYNC_SEL_MASK | | |
472 | RX_FIFO_ENABLE_MASK | TX_FIFO_ENABLE_MASK | SRG_CLK_SEL_MASK | | |
473 | LOOPBACK_MASK | TX_EXTRA_DELAY_MASK; | |
474 | ||
475 | new_reg = (config->tx_clk_sel | config->rx_clk_sel | | |
476 | config->rx_fsync_pol | config->tx_fsync_pol | | |
477 | config->rx_fsync_sel | config->tx_fsync_sel | | |
478 | config->rx_fifo_config | config->tx_fifo_config | | |
479 | config->srg_clk_sel | config->loopback_enable | | |
480 | config->tx_data_enable); | |
481 | ||
482 | old_reg = readl(msp->registers + MSP_GCR); | |
483 | old_reg &= ~mask; | |
484 | new_reg |= old_reg; | |
485 | writel(new_reg, msp->registers + MSP_GCR); | |
486 | ||
487 | res = enable_msp(msp, config); | |
488 | if (res < 0) { | |
489 | dev_err(msp->dev, "%s: ERROR: enable_msp failed (%d)!\n", | |
490 | __func__, res); | |
491 | return -EBUSY; | |
492 | } | |
493 | if (config->loopback_enable & 0x80) | |
494 | msp->loopback_enable = 1; | |
495 | ||
496 | /* Flush FIFOs */ | |
497 | flush_fifo_tx(msp); | |
498 | flush_fifo_rx(msp); | |
499 | ||
500 | msp->msp_state = MSP_STATE_CONFIGURED; | |
501 | return 0; | |
502 | } | |
503 | ||
504 | static void disable_msp_rx(struct ux500_msp *msp) | |
505 | { | |
506 | u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC; | |
507 | ||
508 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
509 | writel(reg_val_GCR & ~RX_ENABLE, msp->registers + MSP_GCR); | |
510 | reg_val_DMACR = readl(msp->registers + MSP_DMACR); | |
511 | writel(reg_val_DMACR & ~RX_DMA_ENABLE, msp->registers + MSP_DMACR); | |
512 | reg_val_IMSC = readl(msp->registers + MSP_IMSC); | |
513 | writel(reg_val_IMSC & | |
514 | ~(RX_SERVICE_INT | RX_OVERRUN_ERROR_INT), | |
515 | msp->registers + MSP_IMSC); | |
516 | ||
517 | msp->dir_busy &= ~MSP_DIR_RX; | |
518 | } | |
519 | ||
520 | static void disable_msp_tx(struct ux500_msp *msp) | |
521 | { | |
522 | u32 reg_val_GCR, reg_val_DMACR, reg_val_IMSC; | |
523 | ||
524 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
525 | writel(reg_val_GCR & ~TX_ENABLE, msp->registers + MSP_GCR); | |
526 | reg_val_DMACR = readl(msp->registers + MSP_DMACR); | |
527 | writel(reg_val_DMACR & ~TX_DMA_ENABLE, msp->registers + MSP_DMACR); | |
528 | reg_val_IMSC = readl(msp->registers + MSP_IMSC); | |
529 | writel(reg_val_IMSC & | |
530 | ~(TX_SERVICE_INT | TX_UNDERRUN_ERR_INT), | |
531 | msp->registers + MSP_IMSC); | |
532 | ||
533 | msp->dir_busy &= ~MSP_DIR_TX; | |
534 | } | |
535 | ||
536 | static int disable_msp(struct ux500_msp *msp, unsigned int dir) | |
537 | { | |
538 | u32 reg_val_GCR; | |
539 | int status = 0; | |
540 | unsigned int disable_tx, disable_rx; | |
541 | ||
542 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
543 | disable_tx = dir & MSP_DIR_TX; | |
544 | disable_rx = dir & MSP_DIR_TX; | |
545 | if (disable_tx && disable_rx) { | |
546 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
547 | writel(reg_val_GCR | LOOPBACK_MASK, | |
548 | msp->registers + MSP_GCR); | |
549 | ||
550 | /* Flush TX-FIFO */ | |
551 | flush_fifo_tx(msp); | |
552 | ||
553 | /* Disable TX-channel */ | |
554 | writel((readl(msp->registers + MSP_GCR) & | |
555 | (~TX_ENABLE)), msp->registers + MSP_GCR); | |
556 | ||
557 | /* Flush RX-FIFO */ | |
558 | flush_fifo_rx(msp); | |
559 | ||
560 | /* Disable Loopback and Receive channel */ | |
561 | writel((readl(msp->registers + MSP_GCR) & | |
562 | (~(RX_ENABLE | LOOPBACK_MASK))), | |
563 | msp->registers + MSP_GCR); | |
564 | ||
565 | disable_msp_tx(msp); | |
566 | disable_msp_rx(msp); | |
567 | } else if (disable_tx) | |
568 | disable_msp_tx(msp); | |
569 | else if (disable_rx) | |
570 | disable_msp_rx(msp); | |
571 | ||
572 | return status; | |
573 | } | |
574 | ||
575 | int ux500_msp_i2s_trigger(struct ux500_msp *msp, int cmd, int direction) | |
576 | { | |
577 | u32 reg_val_GCR, enable_bit; | |
578 | ||
579 | if (msp->msp_state == MSP_STATE_IDLE) { | |
580 | dev_err(msp->dev, "%s: ERROR: MSP is not configured!\n", | |
581 | __func__); | |
582 | return -EINVAL; | |
583 | } | |
584 | ||
585 | switch (cmd) { | |
586 | case SNDRV_PCM_TRIGGER_START: | |
587 | case SNDRV_PCM_TRIGGER_RESUME: | |
588 | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | |
589 | if (direction == SNDRV_PCM_STREAM_PLAYBACK) | |
590 | enable_bit = TX_ENABLE; | |
591 | else | |
592 | enable_bit = RX_ENABLE; | |
593 | reg_val_GCR = readl(msp->registers + MSP_GCR); | |
594 | writel(reg_val_GCR | enable_bit, msp->registers + MSP_GCR); | |
595 | break; | |
596 | ||
597 | case SNDRV_PCM_TRIGGER_STOP: | |
598 | case SNDRV_PCM_TRIGGER_SUSPEND: | |
599 | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | |
600 | if (direction == SNDRV_PCM_STREAM_PLAYBACK) | |
601 | disable_msp_tx(msp); | |
602 | else | |
603 | disable_msp_rx(msp); | |
604 | break; | |
605 | default: | |
606 | return -EINVAL; | |
607 | break; | |
608 | } | |
609 | ||
610 | return 0; | |
611 | } | |
612 | ||
613 | int ux500_msp_i2s_close(struct ux500_msp *msp, unsigned int dir) | |
614 | { | |
6ee0b4b0 | 615 | int status = 0; |
3592b7f6 OL |
616 | |
617 | dev_dbg(msp->dev, "%s: Enter (dir = 0x%01x).\n", __func__, dir); | |
618 | ||
619 | status = disable_msp(msp, dir); | |
620 | if (msp->dir_busy == 0) { | |
621 | /* disable sample rate and frame generators */ | |
622 | msp->msp_state = MSP_STATE_IDLE; | |
623 | writel((readl(msp->registers + MSP_GCR) & | |
624 | (~(FRAME_GEN_ENABLE | SRG_ENABLE))), | |
625 | msp->registers + MSP_GCR); | |
5ca032ee | 626 | |
3592b7f6 OL |
627 | writel(0, msp->registers + MSP_GCR); |
628 | writel(0, msp->registers + MSP_TCF); | |
629 | writel(0, msp->registers + MSP_RCF); | |
630 | writel(0, msp->registers + MSP_DMACR); | |
631 | writel(0, msp->registers + MSP_SRG); | |
632 | writel(0, msp->registers + MSP_MCR); | |
633 | writel(0, msp->registers + MSP_RCM); | |
634 | writel(0, msp->registers + MSP_RCV); | |
635 | writel(0, msp->registers + MSP_TCE0); | |
636 | writel(0, msp->registers + MSP_TCE1); | |
637 | writel(0, msp->registers + MSP_TCE2); | |
638 | writel(0, msp->registers + MSP_TCE3); | |
639 | writel(0, msp->registers + MSP_RCE0); | |
640 | writel(0, msp->registers + MSP_RCE1); | |
641 | writel(0, msp->registers + MSP_RCE2); | |
642 | writel(0, msp->registers + MSP_RCE3); | |
643 | } | |
644 | ||
645 | return status; | |
646 | ||
647 | } | |
648 | ||
7ee4518a WY |
649 | static int ux500_msp_i2s_of_init_msp(struct platform_device *pdev, |
650 | struct ux500_msp *msp, | |
651 | struct msp_i2s_platform_data **platform_data) | |
05c56c24 LJ |
652 | { |
653 | struct msp_i2s_platform_data *pdata; | |
654 | ||
655 | *platform_data = devm_kzalloc(&pdev->dev, | |
656 | sizeof(struct msp_i2s_platform_data), | |
657 | GFP_KERNEL); | |
658 | pdata = *platform_data; | |
659 | if (!pdata) | |
660 | return -ENOMEM; | |
661 | ||
662 | msp->playback_dma_data.dma_cfg = devm_kzalloc(&pdev->dev, | |
663 | sizeof(struct stedma40_chan_cfg), | |
664 | GFP_KERNEL); | |
665 | if (!msp->playback_dma_data.dma_cfg) | |
666 | return -ENOMEM; | |
667 | ||
668 | msp->capture_dma_data.dma_cfg = devm_kzalloc(&pdev->dev, | |
669 | sizeof(struct stedma40_chan_cfg), | |
670 | GFP_KERNEL); | |
671 | if (!msp->capture_dma_data.dma_cfg) | |
672 | return -ENOMEM; | |
673 | ||
674 | return 0; | |
675 | } | |
676 | ||
3592b7f6 OL |
677 | int ux500_msp_i2s_init_msp(struct platform_device *pdev, |
678 | struct ux500_msp **msp_p, | |
679 | struct msp_i2s_platform_data *platform_data) | |
680 | { | |
3592b7f6 | 681 | struct resource *res = NULL; |
49731c23 | 682 | struct device_node *np = pdev->dev.of_node; |
3592b7f6 | 683 | struct ux500_msp *msp; |
05c56c24 | 684 | int ret; |
3592b7f6 | 685 | |
3592b7f6 OL |
686 | *msp_p = devm_kzalloc(&pdev->dev, sizeof(struct ux500_msp), GFP_KERNEL); |
687 | msp = *msp_p; | |
0dcd4742 LJ |
688 | if (!msp) |
689 | return -ENOMEM; | |
3592b7f6 | 690 | |
05c56c24 LJ |
691 | if (!platform_data) { |
692 | if (np) { | |
693 | ret = ux500_msp_i2s_of_init_msp(pdev, msp, | |
694 | &platform_data); | |
695 | if (ret) | |
696 | return ret; | |
697 | } else | |
05304949 | 698 | return -EINVAL; |
05c56c24 LJ |
699 | } else { |
700 | msp->playback_dma_data.dma_cfg = platform_data->msp_i2s_dma_tx; | |
701 | msp->capture_dma_data.dma_cfg = platform_data->msp_i2s_dma_rx; | |
702 | msp->id = platform_data->id; | |
703 | } | |
49731c23 | 704 | |
3592b7f6 | 705 | msp->dev = &pdev->dev; |
3592b7f6 OL |
706 | |
707 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
708 | if (res == NULL) { | |
709 | dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n", | |
710 | __func__); | |
b18e93a4 | 711 | return -ENOMEM; |
3592b7f6 OL |
712 | } |
713 | ||
20413113 FB |
714 | msp->playback_dma_data.tx_rx_addr = res->start + MSP_DR; |
715 | msp->capture_dma_data.tx_rx_addr = res->start + MSP_DR; | |
716 | ||
b18e93a4 JL |
717 | msp->registers = devm_ioremap(&pdev->dev, res->start, |
718 | resource_size(res)); | |
3592b7f6 OL |
719 | if (msp->registers == NULL) { |
720 | dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__); | |
b18e93a4 | 721 | return -ENOMEM; |
3592b7f6 OL |
722 | } |
723 | ||
724 | msp->msp_state = MSP_STATE_IDLE; | |
725 | msp->loopback_enable = 0; | |
726 | ||
3592b7f6 | 727 | return 0; |
3592b7f6 OL |
728 | } |
729 | ||
730 | void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, | |
731 | struct ux500_msp *msp) | |
732 | { | |
733 | dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id); | |
3592b7f6 OL |
734 | } |
735 | ||
85f24391 | 736 | MODULE_LICENSE("GPL v2"); |