[deliverable/linux.git] / arch / arm / mach-omap2 / Makefile

#
# Makefile for the linux kernel.
#

# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
	 common.o gpio.o dma.o wd_timer.o

omap-2-3-common				= irq.o sdrc.o
hwmod-common				= omap_hwmod.o \
					  omap_hwmod_common_data.o
clock-common				= clock.o clock_common_data.o \
					  clkt_dpll.o clkt_clksel.o

obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)

obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o

obj-$(CONFIG_TWL4030_CORE) += omap_twl.o

# SMP support ONLY available for OMAP4
obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o

plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)

# Functions loaded to SRAM
obj-$(CONFIG_SOC_OMAP2420)		+= sram242x.o
obj-$(CONFIG_SOC_OMAP2430)		+= sram243x.o
obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o

AFLAGS_sram242x.o			:=-Wa,-march=armv6
AFLAGS_sram243x.o			:=-Wa,-march=armv6
AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a

# Pin multiplexing
obj-$(CONFIG_SOC_OMAP2420)		+= mux2420.o
obj-$(CONFIG_SOC_OMAP2430)		+= mux2430.o
obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o

# SMS/SDRC
obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
# obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o

# OPP table initialization
ifeq ($(CONFIG_PM_OPP),y)
obj-y					+= opp.o
obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
endif

# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
					   cpuidle34xx.o pm_bus.o
obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o voltage.o pm_bus.o
obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o

AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a

ifeq ($(CONFIG_PM_VERBOSE),y)
CFLAGS_pm_bus.o				+= -DDEBUG
endif

endif

# PRCM
obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
# will be removed once the OMAP4 part of the codebase is converted to
# use OMAP4-specific PRCM functions.
obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
					   cm44xx.o prcm_mpu44xx.o \
					   prminst44xx.o

# OMAP powerdomain framework
powerdomain-common			+= powerdomain.o powerdomain-common.o
obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains2xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
					   powerdomain2xxx_3xxx.o \
					   powerdomains3xxx_data.o \
					   powerdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
					   powerdomain44xx.o \
					   powerdomains44xx_data.o

# PRCM clockdomain control
obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
					   clockdomain2xxx_3xxx.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
					   clockdomain2xxx_3xxx.o \
					   clockdomains2xxx_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
					   clockdomain44xx.o \
					   clockdomains44xx_data.o
# Clock framework
obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
					   clkt2xxx_sys.o \
					   clkt2xxx_dpllcore.o \
					   clkt2xxx_virt_prcm_set.o \
					   clkt2xxx_apll.o clkt2xxx_osc.o \
					   clkt2xxx_dpll.o
obj-$(CONFIG_SOC_OMAP2420)		+= clock2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o clock2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o \
					   clock34xx.o clkt34xx_dpll3m2.o \
					   clock3517.o clock36xx.o \
					   dpll3xxx.o clock3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common) clock44xx_data.o \
					   dpll3xxx.o dpll44xx.o

# OMAP2 clock rate set data (old "OPP" data)
obj-$(CONFIG_SOC_OMAP2420)		+= opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= opp2430_data.o

# hwmod data
obj-$(CONFIG_SOC_OMAP2420)		+= omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430)		+= omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3)		+= omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4)		+= omap_hwmod_44xx_data.o

# EMU peripherals
obj-$(CONFIG_OMAP3_EMU)			+= emu.o

obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
mailbox_mach-objs			:= mailbox.o

obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o

iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
obj-y					+= $(iommu-m) $(iommu-y)

i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
obj-y					+= $(i2c-omap-m) $(i2c-omap-y)

ifneq ($(CONFIG_TIDSPBRIDGE),)
obj-y					+= dsp.o
endif

# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_APOLLON)		+= board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o \
					   hsmmc.o
obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o \
                                           hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OVERO)		+= board-overo.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3EVM)		+= board-omap3evm.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
					   hsmmc.o \
					   board-flash.o
obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
					   sdram-nokia.o \
					   hsmmc.o
obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
					   sdram-nokia.o \
					   board-rx51-peripherals.o \
					   board-rx51-video.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o \
					   board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
					   board-zoom-peripherals.o \
					   board-zoom-display.o \
					   board-flash.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
					   hsmmc.o
obj-$(CONFIG_MACH_CM_T3517)		+= board-cm-t3517.o
obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
					   hsmmc.o
obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
					   hsmmc.o
obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
					   hsmmc.o \
					   omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
					   hsmmc.o \
					   omap_phy_internal.o

obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
					   omap_phy_internal.o \

obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o

obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
					   hsmmc.o
obj-$(CONFIG_MACH_TI8168EVM)		+= board-ti8168evm.o
# Platform specific device init code
usbfs-$(CONFIG_ARCH_OMAP_OTG)		:= usb-fs.o
obj-y					+= $(usbfs-m) $(usbfs-y)
obj-y					+= usb-musb.o
obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
obj-y					+= usb-ehci.o

onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
obj-y					+= $(onenand-m) $(onenand-y)

nand-$(CONFIG_MTD_NAND_OMAP2)		:= gpmc-nand.o
obj-y					+= $(nand-m) $(nand-y)

smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
obj-y					+= $(smc91x-m) $(smc91x-y)

smsc911x-$(CONFIG_SMSC911X)		:= gpmc-smsc911x.o
obj-y					+= $(smsc911x-m) $(smsc911x-y)
obj-$(CONFIG_ARCH_OMAP4)		+= hwspinlock.o
Commit	Line	Data
	1	#
	2	# Makefile for the linux kernel.
	3	#
	4
	5	# Common support
	6	obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
	7	common.o gpio.o dma.o wd_timer.o
	8
	9	omap-2-3-common = irq.o sdrc.o
	10	hwmod-common = omap_hwmod.o \
	11	omap_hwmod_common_data.o
	12	clock-common = clock.o clock_common_data.o \
	13	clkt_dpll.o clkt_clksel.o
	14
	15	obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
	16	obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
	17	obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
	18
	19	obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
	20
	21	obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
	22
	23	# SMP support ONLY available for OMAP4
	24	obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
	25	obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
	26	obj-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o
	27	obj-$(CONFIG_ARCH_OMAP4) += omap44xx-smc.o omap4-common.o
	28
	29	plus_sec := $(call as-instr,.arch_extension sec,+sec)
	30	AFLAGS_omap-headsmp.o :=-Wa,-march=armv7-a$(plus_sec)
	31	AFLAGS_omap44xx-smc.o :=-Wa,-march=armv7-a$(plus_sec)
	32
	33	# Functions loaded to SRAM
	34	obj-$(CONFIG_SOC_OMAP2420) += sram242x.o
	35	obj-$(CONFIG_SOC_OMAP2430) += sram243x.o
	36	obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
	37
	38	AFLAGS_sram242x.o :=-Wa,-march=armv6
	39	AFLAGS_sram243x.o :=-Wa,-march=armv6
	40	AFLAGS_sram34xx.o :=-Wa,-march=armv7-a
	41
	42	# Pin multiplexing
	43	obj-$(CONFIG_SOC_OMAP2420) += mux2420.o
	44	obj-$(CONFIG_SOC_OMAP2430) += mux2430.o
	45	obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o
	46	obj-$(CONFIG_ARCH_OMAP4) += mux44xx.o
	47
	48	# SMS/SDRC
	49	obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o
	50	# obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o
	51
	52	# OPP table initialization
	53	ifeq ($(CONFIG_PM_OPP),y)
	54	obj-y += opp.o
	55	obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
	56	obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
	57	endif
	58
	59	# Power Management
	60	ifeq ($(CONFIG_PM),y)
	61	obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
	62	obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o pm_bus.o voltage.o
	63	obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o voltage.o \
	64	cpuidle34xx.o pm_bus.o
	65	obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o voltage.o pm_bus.o
	66	obj-$(CONFIG_PM_DEBUG) += pm-debug.o
	67	obj-$(CONFIG_OMAP_SMARTREFLEX) += sr_device.o smartreflex.o
	68	obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3) += smartreflex-class3.o
	69
	70	AFLAGS_sleep24xx.o :=-Wa,-march=armv6
	71	AFLAGS_sleep34xx.o :=-Wa,-march=armv7-a
	72
	73	ifeq ($(CONFIG_PM_VERBOSE),y)
	74	CFLAGS_pm_bus.o += -DDEBUG
	75	endif
	76
	77	endif
	78
	79	# PRCM
	80	obj-$(CONFIG_ARCH_OMAP2) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	81	obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
	82	# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
	83	# will be removed once the OMAP4 part of the codebase is converted to
	84	# use OMAP4-specific PRCM functions.
	85	obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
	86	cm44xx.o prcm_mpu44xx.o \
	87	prminst44xx.o
	88
	89	# OMAP powerdomain framework
	90	powerdomain-common += powerdomain.o powerdomain-common.o
	91	obj-$(CONFIG_ARCH_OMAP2) += $(powerdomain-common) \
	92	powerdomain2xxx_3xxx.o \
	93	powerdomains2xxx_data.o \
	94	powerdomains2xxx_3xxx_data.o
	95	obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \
	96	powerdomain2xxx_3xxx.o \
	97	powerdomains3xxx_data.o \
	98	powerdomains2xxx_3xxx_data.o
	99	obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \
	100	powerdomain44xx.o \
	101	powerdomains44xx_data.o
	102
	103	# PRCM clockdomain control
	104	obj-$(CONFIG_ARCH_OMAP2) += clockdomain.o \
	105	clockdomain2xxx_3xxx.o \
	106	clockdomains2xxx_3xxx_data.o
	107	obj-$(CONFIG_ARCH_OMAP3) += clockdomain.o \
	108	clockdomain2xxx_3xxx.o \
	109	clockdomains2xxx_3xxx_data.o
	110	obj-$(CONFIG_ARCH_OMAP4) += clockdomain.o \
	111	clockdomain44xx.o \
	112	clockdomains44xx_data.o
	113	# Clock framework
	114	obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \
	115	clkt2xxx_sys.o \
	116	clkt2xxx_dpllcore.o \
	117	clkt2xxx_virt_prcm_set.o \
	118	clkt2xxx_apll.o clkt2xxx_osc.o \
	119	clkt2xxx_dpll.o
	120	obj-$(CONFIG_SOC_OMAP2420) += clock2420_data.o
	121	obj-$(CONFIG_SOC_OMAP2430) += clock2430.o clock2430_data.o
	122	obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \
	123	clock34xx.o clkt34xx_dpll3m2.o \
	124	clock3517.o clock36xx.o \
	125	dpll3xxx.o clock3xxx_data.o
	126	obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \
	127	dpll3xxx.o dpll44xx.o
	128
	129	# OMAP2 clock rate set data (old "OPP" data)
	130	obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
	131	obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
	132
	133	# hwmod data
	134	obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
	135	obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
	136	obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
	137	obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
	138
	139	# EMU peripherals
	140	obj-$(CONFIG_OMAP3_EMU) += emu.o
	141
	142	obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
	143	mailbox_mach-objs := mailbox.o
	144
	145	obj-$(CONFIG_OMAP_IOMMU) += iommu2.o
	146
	147	iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
	148	obj-y += $(iommu-m) $(iommu-y)
	149
	150	i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
	151	obj-y += $(i2c-omap-m) $(i2c-omap-y)
	152
	153	ifneq ($(CONFIG_TIDSPBRIDGE),)
	154	obj-y += dsp.o
	155	endif
	156
	157	# Specific board support
	158	obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
	159	obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
	160	obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o \
	161	hsmmc.o
	162	obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
	163	obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
	164	hsmmc.o
	165	obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
	166	hsmmc.o
	167	obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
	168	board-flash.o \
	169	hsmmc.o
	170	obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o \
	171	hsmmc.o
	172	obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o \
	173	hsmmc.o
	174	obj-$(CONFIG_MACH_OVERO) += board-overo.o \
	175	hsmmc.o
	176	obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
	177	hsmmc.o
	178	obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
	179	hsmmc.o
	180	obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
	181	hsmmc.o \
	182	board-flash.o
	183	obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
	184	obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
	185	sdram-nokia.o \
	186	hsmmc.o
	187	obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
	188	sdram-nokia.o \
	189	board-rx51-peripherals.o \
	190	board-rx51-video.o \
	191	hsmmc.o
	192	obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
	193	board-zoom-peripherals.o \
	194	board-zoom-display.o \
	195	board-flash.o \
	196	hsmmc.o \
	197	board-zoom-debugboard.o
	198	obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
	199	board-zoom-peripherals.o \
	200	board-zoom-display.o \
	201	board-flash.o \
	202	hsmmc.o \
	203	board-zoom-debugboard.o
	204	obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
	205	board-zoom-peripherals.o \
	206	board-zoom-display.o \
	207	board-flash.o \
	208	hsmmc.o
	209	obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
	210	hsmmc.o
	211	obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o
	212	obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \
	213	hsmmc.o
	214	obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \
	215	hsmmc.o
	216	obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \
	217	hsmmc.o
	218	obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \
	219	hsmmc.o \
	220	omap_phy_internal.o
	221	obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
	222	hsmmc.o \
	223	omap_phy_internal.o
	224
	225	obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o \
	226	omap_phy_internal.o \
	227
	228	obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
	229
	230	obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o \
	231	hsmmc.o
	232	obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
	233	# Platform specific device init code
	234	usbfs-$(CONFIG_ARCH_OMAP_OTG) := usb-fs.o
	235	obj-y += $(usbfs-m) $(usbfs-y)
	236	obj-y += usb-musb.o
	237	obj-$(CONFIG_MACH_OMAP2_TUSB6010) += usb-tusb6010.o
	238	obj-y += usb-ehci.o
	239
	240	onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
	241	obj-y += $(onenand-m) $(onenand-y)
	242
	243	nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
	244	obj-y += $(nand-m) $(nand-y)
	245
	246	smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
	247	obj-y += $(smc91x-m) $(smc91x-y)
	248
	249	smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
	250	obj-y += $(smsc911x-m) $(smsc911x-y)
	251	obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o