| 1 | # |
| 2 | # This file is subject to the terms and conditions of the GNU General Public |
| 3 | # License. See the file "COPYING" in the main directory of this archive |
| 4 | # for more details. |
| 5 | # |
| 6 | # Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle |
| 7 | # DECStation modifications by Paul M. Antoine, 1996 |
| 8 | # Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki |
| 9 | # |
| 10 | # This file is included by the global makefile so that you can add your own |
| 11 | # architecture-specific flags and dependencies. Remember to do have actions |
| 12 | # for "archclean" cleaning up for this architecture. |
| 13 | # |
| 14 | |
| 15 | KBUILD_DEFCONFIG := ip22_defconfig |
| 16 | |
| 17 | # |
| 18 | # Select the object file format to substitute into the linker script. |
| 19 | # |
| 20 | ifdef CONFIG_CPU_LITTLE_ENDIAN |
| 21 | 32bit-tool-archpref = mipsel |
| 22 | 64bit-tool-archpref = mips64el |
| 23 | 32bit-bfd = elf32-tradlittlemips |
| 24 | 64bit-bfd = elf64-tradlittlemips |
| 25 | 32bit-emul = elf32ltsmip |
| 26 | 64bit-emul = elf64ltsmip |
| 27 | else |
| 28 | 32bit-tool-archpref = mips |
| 29 | 64bit-tool-archpref = mips64 |
| 30 | 32bit-bfd = elf32-tradbigmips |
| 31 | 64bit-bfd = elf64-tradbigmips |
| 32 | 32bit-emul = elf32btsmip |
| 33 | 64bit-emul = elf64btsmip |
| 34 | endif |
| 35 | |
| 36 | ifdef CONFIG_32BIT |
| 37 | tool-archpref = $(32bit-tool-archpref) |
| 38 | UTS_MACHINE := mips |
| 39 | endif |
| 40 | ifdef CONFIG_64BIT |
| 41 | tool-archpref = $(64bit-tool-archpref) |
| 42 | UTS_MACHINE := mips64 |
| 43 | endif |
| 44 | |
| 45 | ifneq ($(SUBARCH),$(ARCH)) |
| 46 | ifeq ($(CROSS_COMPILE),) |
| 47 | CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) |
| 48 | endif |
| 49 | endif |
| 50 | |
| 51 | ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| 52 | ifndef KBUILD_MCOUNT_RA_ADDRESS |
| 53 | ifeq ($(call cc-option-yn,-mmcount-ra-address), y) |
| 54 | cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS |
| 55 | endif |
| 56 | endif |
| 57 | endif |
| 58 | cflags-y += $(call cc-option, -mno-check-zero-division) |
| 59 | |
| 60 | ifdef CONFIG_32BIT |
| 61 | ld-emul = $(32bit-emul) |
| 62 | vmlinux-32 = vmlinux |
| 63 | vmlinux-64 = vmlinux.64 |
| 64 | |
| 65 | cflags-y += -mabi=32 |
| 66 | endif |
| 67 | |
| 68 | ifdef CONFIG_64BIT |
| 69 | ld-emul = $(64bit-emul) |
| 70 | vmlinux-32 = vmlinux.32 |
| 71 | vmlinux-64 = vmlinux |
| 72 | |
| 73 | cflags-y += -mabi=64 |
| 74 | endif |
| 75 | |
| 76 | all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) |
| 77 | all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) |
| 78 | all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz |
| 79 | |
| 80 | # |
| 81 | # GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel |
| 82 | # code since it only slows down the whole thing. At some point we might make |
| 83 | # use of global pointer optimizations but their use of $28 conflicts with |
| 84 | # the current pointer optimization. |
| 85 | # |
| 86 | # The DECStation requires an ECOFF kernel for remote booting, other MIPS |
| 87 | # machines may also. Since BFD is incredibly buggy with respect to |
| 88 | # crossformat linking we rely on the elf2ecoff tool for format conversion. |
| 89 | # |
| 90 | cflags-y += -G 0 -mno-abicalls -fno-pic -pipe |
| 91 | cflags-y += -msoft-float |
| 92 | LDFLAGS_vmlinux += -G 0 -static -n -nostdlib |
| 93 | KBUILD_AFLAGS_MODULE += -mlong-calls |
| 94 | KBUILD_CFLAGS_MODULE += -mlong-calls |
| 95 | |
| 96 | # |
| 97 | # pass -msoft-float to GAS if it supports it. However on newer binutils |
| 98 | # (specifically newer than 2.24.51.20140728) we then also need to explicitly |
| 99 | # set ".set hardfloat" in all files which manipulate floating point registers. |
| 100 | # |
| 101 | ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) |
| 102 | cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float |
| 103 | endif |
| 104 | |
| 105 | cflags-y += -ffreestanding |
| 106 | |
| 107 | # |
| 108 | # We explicitly add the endianness specifier if needed, this allows |
| 109 | # to compile kernels with a toolchain for the other endianness. We |
| 110 | # carefully avoid to add it redundantly because gcc 3.3/3.4 complains |
| 111 | # when fed the toolchain default! |
| 112 | # |
| 113 | # Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of |
| 114 | # 2006-10-10 don't properly change the predefined symbols if -EB / -EL |
| 115 | # are used, so we kludge that here. A bug has been filed at |
| 116 | # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. |
| 117 | # |
| 118 | undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__ |
| 119 | undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__ |
| 120 | predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__ |
| 121 | predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ |
| 122 | cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) |
| 123 | cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) |
| 124 | |
| 125 | cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ |
| 126 | -fno-omit-frame-pointer |
| 127 | # |
| 128 | # CPU-dependent compiler/assembler options for optimization. |
| 129 | # |
| 130 | cflags-$(CONFIG_CPU_R3000) += -march=r3000 |
| 131 | cflags-$(CONFIG_CPU_TX39XX) += -march=r3900 |
| 132 | cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap |
| 133 | cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap |
| 134 | cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap |
| 135 | cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap |
| 136 | cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap |
| 137 | cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ |
| 138 | -Wa,-mips32 -Wa,--trap |
| 139 | cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ |
| 140 | -Wa,-mips32r2 -Wa,--trap |
| 141 | cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap |
| 142 | cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ |
| 143 | -Wa,-mips64 -Wa,--trap |
| 144 | cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ |
| 145 | -Wa,-mips64r2 -Wa,--trap |
| 146 | cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap |
| 147 | cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap |
| 148 | cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ |
| 149 | -Wa,--trap |
| 150 | cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ |
| 151 | -Wa,--trap |
| 152 | cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ |
| 153 | -Wa,--trap |
| 154 | cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ |
| 155 | -Wa,--trap |
| 156 | cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ |
| 157 | -Wa,--trap |
| 158 | cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx) |
| 159 | cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d) |
| 160 | cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap |
| 161 | cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ |
| 162 | -Wa,--trap |
| 163 | cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap |
| 164 | ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON)))) |
| 165 | cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon |
| 166 | endif |
| 167 | cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 |
| 168 | cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap |
| 169 | # |
| 170 | # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a |
| 171 | # as MIPS64 R1; older versions as just R1. This leaves the possibility open |
| 172 | # that GCC might generate R2 code for -march=loongson3a which then is rejected |
| 173 | # by GAS. The cc-option can't probe for this behaviour so -march=loongson3a |
| 174 | # can't easily be used safely within the kbuild framework. |
| 175 | # |
| 176 | cflags-$(CONFIG_CPU_LOONGSON3) += \ |
| 177 | $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ |
| 178 | -Wa,-mips64r2 -Wa,--trap |
| 179 | |
| 180 | cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) |
| 181 | cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) |
| 182 | cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) |
| 183 | |
| 184 | # For smartmips configurations, there are hundreds of warnings due to ISA overrides |
| 185 | # in assembly and header files. smartmips is only supported for MIPS32r1 onwards |
| 186 | # and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or |
| 187 | # similar directives in the kernel will spam the build logs with the following warnings: |
| 188 | # Warning: the `smartmips' extension requires MIPS32 revision 1 or greater |
| 189 | # or |
| 190 | # Warning: the 64-bit MIPS architecture does not support the `smartmips' extension |
| 191 | # Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has |
| 192 | # been fixed properly. |
| 193 | mips-cflags := $(cflags-y) |
| 194 | ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y) |
| 195 | smartmips-ase := $(call cc-option-yn,$(mips-cflags) -msmartmips) |
| 196 | cflags-$(smartmips-ase) += -msmartmips -Wa,--no-warn |
| 197 | endif |
| 198 | ifeq ($(CONFIG_CPU_MICROMIPS),y) |
| 199 | micromips-ase := $(call cc-option-yn,$(mips-cflags) -mmicromips) |
| 200 | cflags-$(micromips-ase) += -mmicromips |
| 201 | endif |
| 202 | ifeq ($(CONFIG_CPU_HAS_MSA),y) |
| 203 | toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa) |
| 204 | cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA |
| 205 | endif |
| 206 | |
| 207 | # |
| 208 | # Firmware support |
| 209 | # |
| 210 | libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ |
| 211 | libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ |
| 212 | libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ |
| 213 | libs-y += arch/mips/fw/lib/ |
| 214 | |
| 215 | # |
| 216 | # Kernel compression |
| 217 | # |
| 218 | ifdef SYS_SUPPORTS_ZBOOT |
| 219 | COMPRESSION_FNAME = vmlinuz |
| 220 | else |
| 221 | COMPRESSION_FNAME = vmlinux |
| 222 | endif |
| 223 | |
| 224 | # |
| 225 | # Board-dependent options and extra files |
| 226 | # |
| 227 | include arch/mips/Kbuild.platforms |
| 228 | |
| 229 | ifdef CONFIG_PHYSICAL_START |
| 230 | load-y = $(CONFIG_PHYSICAL_START) |
| 231 | endif |
| 232 | entry-y = 0x$(shell $(NM) vmlinux 2>/dev/null \ |
| 233 | | grep "\bkernel_entry\b" | cut -f1 -d \ ) |
| 234 | |
| 235 | cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic |
| 236 | drivers-$(CONFIG_PCI) += arch/mips/pci/ |
| 237 | |
| 238 | # |
| 239 | # Automatically detect the build format. By default we choose |
| 240 | # the elf format according to the load address. |
| 241 | # We can always force a build with a 64-bits symbol format by |
| 242 | # passing 'KBUILD_SYM32=no' option to the make's command line. |
| 243 | # |
| 244 | ifdef CONFIG_64BIT |
| 245 | ifndef KBUILD_SYM32 |
| 246 | ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0) |
| 247 | KBUILD_SYM32 = y |
| 248 | endif |
| 249 | endif |
| 250 | |
| 251 | ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy) |
| 252 | cflags-y += -msym32 -DKBUILD_64BIT_SYM32 |
| 253 | else |
| 254 | ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y) |
| 255 | $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32) |
| 256 | endif |
| 257 | endif |
| 258 | endif |
| 259 | |
| 260 | KBUILD_AFLAGS += $(cflags-y) |
| 261 | KBUILD_CFLAGS += $(cflags-y) |
| 262 | KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) |
| 263 | KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) |
| 264 | |
| 265 | bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ |
| 266 | VMLINUX_ENTRY_ADDRESS=$(entry-y) |
| 267 | |
| 268 | LDFLAGS += -m $(ld-emul) |
| 269 | |
| 270 | ifdef CONFIG_MIPS |
| 271 | CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ |
| 272 | egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ |
| 273 | sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') |
| 274 | ifdef CONFIG_64BIT |
| 275 | CHECKFLAGS += -m64 |
| 276 | endif |
| 277 | endif |
| 278 | |
| 279 | OBJCOPYFLAGS += --remove-section=.reginfo |
| 280 | |
| 281 | head-y := arch/mips/kernel/head.o |
| 282 | |
| 283 | libs-y += arch/mips/lib/ |
| 284 | libs-y += arch/mips/math-emu/ |
| 285 | |
| 286 | # See arch/mips/Kbuild for content of core part of the kernel |
| 287 | core-y += arch/mips/ |
| 288 | |
| 289 | drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ |
| 290 | |
| 291 | # suspend and hibernation support |
| 292 | drivers-$(CONFIG_PM) += arch/mips/power/ |
| 293 | |
| 294 | # boot image targets (arch/mips/boot/) |
| 295 | boot-y := vmlinux.bin |
| 296 | boot-y += vmlinux.ecoff |
| 297 | boot-y += vmlinux.srec |
| 298 | ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0) |
| 299 | boot-y += uImage |
| 300 | boot-y += uImage.bin |
| 301 | boot-y += uImage.bz2 |
| 302 | boot-y += uImage.gz |
| 303 | boot-y += uImage.lzma |
| 304 | boot-y += uImage.lzo |
| 305 | endif |
| 306 | |
| 307 | # compressed boot image targets (arch/mips/boot/compressed/) |
| 308 | bootz-y := vmlinuz |
| 309 | bootz-y += vmlinuz.bin |
| 310 | bootz-y += vmlinuz.ecoff |
| 311 | bootz-y += vmlinuz.srec |
| 312 | |
| 313 | ifdef CONFIG_LASAT |
| 314 | rom.bin rom.sw: vmlinux |
| 315 | $(Q)$(MAKE) $(build)=arch/mips/lasat/image \ |
| 316 | $(bootvars-y) $@ |
| 317 | endif |
| 318 | |
| 319 | # |
| 320 | # Some machines like the Indy need 32-bit ELF binaries for booting purposes. |
| 321 | # Other need ECOFF, so we build a 32-bit ELF binary for them which we then |
| 322 | # convert to ECOFF using elf2ecoff. |
| 323 | # |
| 324 | quiet_cmd_32 = OBJCOPY $@ |
| 325 | cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ |
| 326 | vmlinux.32: vmlinux |
| 327 | $(call cmd,32) |
| 328 | |
| 329 | # |
| 330 | # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit |
| 331 | # ELF files from 32-bit files by conversion. |
| 332 | # |
| 333 | quiet_cmd_64 = OBJCOPY $@ |
| 334 | cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ |
| 335 | vmlinux.64: vmlinux |
| 336 | $(call cmd,64) |
| 337 | |
| 338 | all: $(all-y) |
| 339 | |
| 340 | # boot |
| 341 | $(boot-y): $(vmlinux-32) FORCE |
| 342 | $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \ |
| 343 | $(bootvars-y) arch/mips/boot/$@ |
| 344 | |
| 345 | ifdef CONFIG_SYS_SUPPORTS_ZBOOT |
| 346 | # boot/compressed |
| 347 | $(bootz-y): $(vmlinux-32) FORCE |
| 348 | $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ |
| 349 | $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@ |
| 350 | else |
| 351 | vmlinuz: FORCE |
| 352 | @echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled' |
| 353 | /bin/false |
| 354 | endif |
| 355 | |
| 356 | |
| 357 | CLEAN_FILES += vmlinux.32 vmlinux.64 |
| 358 | |
| 359 | # device-trees |
| 360 | core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/ |
| 361 | |
| 362 | %.dtb %.dtb.S %.dtb.o: | scripts |
| 363 | $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@ |
| 364 | |
| 365 | PHONY += dtbs |
| 366 | dtbs: scripts |
| 367 | $(Q)$(MAKE) $(build)=arch/mips/boot/dts |
| 368 | |
| 369 | PHONY += dtbs_install |
| 370 | dtbs_install: |
| 371 | $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts |
| 372 | |
| 373 | archprepare: |
| 374 | ifdef CONFIG_MIPS32_N32 |
| 375 | @echo ' Checking missing-syscalls for N32' |
| 376 | $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32" |
| 377 | endif |
| 378 | ifdef CONFIG_MIPS32_O32 |
| 379 | @echo ' Checking missing-syscalls for O32' |
| 380 | $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32" |
| 381 | endif |
| 382 | |
| 383 | install: |
| 384 | $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) |
| 385 | ifdef CONFIG_SYS_SUPPORTS_ZBOOT |
| 386 | $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) |
| 387 | endif |
| 388 | $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) |
| 389 | $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) |
| 390 | |
| 391 | archclean: |
| 392 | $(Q)$(MAKE) $(clean)=arch/mips/boot |
| 393 | $(Q)$(MAKE) $(clean)=arch/mips/boot/compressed |
| 394 | $(Q)$(MAKE) $(clean)=arch/mips/lasat |
| 395 | |
| 396 | define archhelp |
| 397 | echo ' install - install kernel into $(INSTALL_PATH)' |
| 398 | echo ' vmlinux.ecoff - ECOFF boot image' |
| 399 | echo ' vmlinux.bin - Raw binary boot image' |
| 400 | echo ' vmlinux.srec - SREC boot image' |
| 401 | echo ' vmlinux.32 - 64-bit boot image wrapped in 32bits (IP22/IP32)' |
| 402 | echo ' vmlinuz - Compressed boot(zboot) image' |
| 403 | echo ' vmlinuz.ecoff - ECOFF zboot image' |
| 404 | echo ' vmlinuz.bin - Raw binary zboot image' |
| 405 | echo ' vmlinuz.srec - SREC zboot image' |
| 406 | echo ' uImage - U-Boot image' |
| 407 | echo ' uImage.bin - U-Boot image (uncompressed)' |
| 408 | echo ' uImage.bz2 - U-Boot image (bz2)' |
| 409 | echo ' uImage.gz - U-Boot image (gzip)' |
| 410 | echo ' uImage.lzma - U-Boot image (lzma)' |
| 411 | echo ' uImage.lzo - U-Boot image (lzo)' |
| 412 | echo ' dtbs - Device-tree blobs for enabled boards' |
| 413 | echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' |
| 414 | echo |
| 415 | echo ' These will be default as appropriate for a configured platform.' |
| 416 | endef |