| 1 | /* |
| 2 | lm78.c - Part of lm_sensors, Linux kernel modules for hardware |
| 3 | monitoring |
| 4 | Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> |
| 5 | Copyright (c) 2007 Jean Delvare <khali@linux-fr.org> |
| 6 | |
| 7 | This program is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 2 of the License, or |
| 10 | (at your option) any later version. |
| 11 | |
| 12 | This program is distributed in the hope that it will be useful, |
| 13 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | GNU General Public License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 20 | */ |
| 21 | |
| 22 | #include <linux/module.h> |
| 23 | #include <linux/init.h> |
| 24 | #include <linux/slab.h> |
| 25 | #include <linux/jiffies.h> |
| 26 | #include <linux/i2c.h> |
| 27 | #include <linux/platform_device.h> |
| 28 | #include <linux/ioport.h> |
| 29 | #include <linux/hwmon.h> |
| 30 | #include <linux/hwmon-vid.h> |
| 31 | #include <linux/hwmon-sysfs.h> |
| 32 | #include <linux/err.h> |
| 33 | #include <linux/mutex.h> |
| 34 | #include <asm/io.h> |
| 35 | |
| 36 | /* ISA device, if found */ |
| 37 | static struct platform_device *pdev; |
| 38 | |
| 39 | /* Addresses to scan */ |
| 40 | static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, |
| 41 | 0x2e, 0x2f, I2C_CLIENT_END }; |
| 42 | static unsigned short isa_address = 0x290; |
| 43 | |
| 44 | /* Insmod parameters */ |
| 45 | I2C_CLIENT_INSMOD_2(lm78, lm79); |
| 46 | |
| 47 | /* Many LM78 constants specified below */ |
| 48 | |
| 49 | /* Length of ISA address segment */ |
| 50 | #define LM78_EXTENT 8 |
| 51 | |
| 52 | /* Where are the ISA address/data registers relative to the base address */ |
| 53 | #define LM78_ADDR_REG_OFFSET 5 |
| 54 | #define LM78_DATA_REG_OFFSET 6 |
| 55 | |
| 56 | /* The LM78 registers */ |
| 57 | #define LM78_REG_IN_MAX(nr) (0x2b + (nr) * 2) |
| 58 | #define LM78_REG_IN_MIN(nr) (0x2c + (nr) * 2) |
| 59 | #define LM78_REG_IN(nr) (0x20 + (nr)) |
| 60 | |
| 61 | #define LM78_REG_FAN_MIN(nr) (0x3b + (nr)) |
| 62 | #define LM78_REG_FAN(nr) (0x28 + (nr)) |
| 63 | |
| 64 | #define LM78_REG_TEMP 0x27 |
| 65 | #define LM78_REG_TEMP_OVER 0x39 |
| 66 | #define LM78_REG_TEMP_HYST 0x3a |
| 67 | |
| 68 | #define LM78_REG_ALARM1 0x41 |
| 69 | #define LM78_REG_ALARM2 0x42 |
| 70 | |
| 71 | #define LM78_REG_VID_FANDIV 0x47 |
| 72 | |
| 73 | #define LM78_REG_CONFIG 0x40 |
| 74 | #define LM78_REG_CHIPID 0x49 |
| 75 | #define LM78_REG_I2C_ADDR 0x48 |
| 76 | |
| 77 | |
| 78 | /* Conversions. Rounding and limit checking is only done on the TO_REG |
| 79 | variants. */ |
| 80 | |
| 81 | /* IN: mV, (0V to 4.08V) |
| 82 | REG: 16mV/bit */ |
| 83 | static inline u8 IN_TO_REG(unsigned long val) |
| 84 | { |
| 85 | unsigned long nval = SENSORS_LIMIT(val, 0, 4080); |
| 86 | return (nval + 8) / 16; |
| 87 | } |
| 88 | #define IN_FROM_REG(val) ((val) * 16) |
| 89 | |
| 90 | static inline u8 FAN_TO_REG(long rpm, int div) |
| 91 | { |
| 92 | if (rpm <= 0) |
| 93 | return 255; |
| 94 | return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254); |
| 95 | } |
| 96 | |
| 97 | static inline int FAN_FROM_REG(u8 val, int div) |
| 98 | { |
| 99 | return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div); |
| 100 | } |
| 101 | |
| 102 | /* TEMP: mC (-128C to +127C) |
| 103 | REG: 1C/bit, two's complement */ |
| 104 | static inline s8 TEMP_TO_REG(int val) |
| 105 | { |
| 106 | int nval = SENSORS_LIMIT(val, -128000, 127000) ; |
| 107 | return nval<0 ? (nval-500)/1000 : (nval+500)/1000; |
| 108 | } |
| 109 | |
| 110 | static inline int TEMP_FROM_REG(s8 val) |
| 111 | { |
| 112 | return val * 1000; |
| 113 | } |
| 114 | |
| 115 | #define DIV_FROM_REG(val) (1 << (val)) |
| 116 | |
| 117 | /* There are some complications in a module like this. First off, LM78 chips |
| 118 | may be both present on the SMBus and the ISA bus, and we have to handle |
| 119 | those cases separately at some places. Second, there might be several |
| 120 | LM78 chips available (well, actually, that is probably never done; but |
| 121 | it is a clean illustration of how to handle a case like that). Finally, |
| 122 | a specific chip may be attached to *both* ISA and SMBus, and we would |
| 123 | not like to detect it double. */ |
| 124 | |
| 125 | /* For ISA chips, we abuse the i2c_client addr and name fields. We also use |
| 126 | the driver field to differentiate between I2C and ISA chips. */ |
| 127 | struct lm78_data { |
| 128 | struct i2c_client client; |
| 129 | struct device *hwmon_dev; |
| 130 | struct mutex lock; |
| 131 | enum chips type; |
| 132 | |
| 133 | struct mutex update_lock; |
| 134 | char valid; /* !=0 if following fields are valid */ |
| 135 | unsigned long last_updated; /* In jiffies */ |
| 136 | |
| 137 | u8 in[7]; /* Register value */ |
| 138 | u8 in_max[7]; /* Register value */ |
| 139 | u8 in_min[7]; /* Register value */ |
| 140 | u8 fan[3]; /* Register value */ |
| 141 | u8 fan_min[3]; /* Register value */ |
| 142 | s8 temp; /* Register value */ |
| 143 | s8 temp_over; /* Register value */ |
| 144 | s8 temp_hyst; /* Register value */ |
| 145 | u8 fan_div[3]; /* Register encoding, shifted right */ |
| 146 | u8 vid; /* Register encoding, combined */ |
| 147 | u16 alarms; /* Register encoding, combined */ |
| 148 | }; |
| 149 | |
| 150 | |
| 151 | static int lm78_attach_adapter(struct i2c_adapter *adapter); |
| 152 | static int lm78_detect(struct i2c_adapter *adapter, int address, int kind); |
| 153 | static int lm78_detach_client(struct i2c_client *client); |
| 154 | |
| 155 | static int __devinit lm78_isa_probe(struct platform_device *pdev); |
| 156 | static int __devexit lm78_isa_remove(struct platform_device *pdev); |
| 157 | |
| 158 | static int lm78_read_value(struct lm78_data *data, u8 reg); |
| 159 | static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value); |
| 160 | static struct lm78_data *lm78_update_device(struct device *dev); |
| 161 | static void lm78_init_device(struct lm78_data *data); |
| 162 | |
| 163 | |
| 164 | static struct i2c_driver lm78_driver = { |
| 165 | .driver = { |
| 166 | .name = "lm78", |
| 167 | }, |
| 168 | .attach_adapter = lm78_attach_adapter, |
| 169 | .detach_client = lm78_detach_client, |
| 170 | }; |
| 171 | |
| 172 | static struct platform_driver lm78_isa_driver = { |
| 173 | .driver = { |
| 174 | .owner = THIS_MODULE, |
| 175 | .name = "lm78", |
| 176 | }, |
| 177 | .probe = lm78_isa_probe, |
| 178 | .remove = lm78_isa_remove, |
| 179 | }; |
| 180 | |
| 181 | |
| 182 | /* 7 Voltages */ |
| 183 | static ssize_t show_in(struct device *dev, struct device_attribute *da, |
| 184 | char *buf) |
| 185 | { |
| 186 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 187 | struct lm78_data *data = lm78_update_device(dev); |
| 188 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in[attr->index])); |
| 189 | } |
| 190 | |
| 191 | static ssize_t show_in_min(struct device *dev, struct device_attribute *da, |
| 192 | char *buf) |
| 193 | { |
| 194 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 195 | struct lm78_data *data = lm78_update_device(dev); |
| 196 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[attr->index])); |
| 197 | } |
| 198 | |
| 199 | static ssize_t show_in_max(struct device *dev, struct device_attribute *da, |
| 200 | char *buf) |
| 201 | { |
| 202 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 203 | struct lm78_data *data = lm78_update_device(dev); |
| 204 | return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[attr->index])); |
| 205 | } |
| 206 | |
| 207 | static ssize_t set_in_min(struct device *dev, struct device_attribute *da, |
| 208 | const char *buf, size_t count) |
| 209 | { |
| 210 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 211 | struct lm78_data *data = dev_get_drvdata(dev); |
| 212 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 213 | int nr = attr->index; |
| 214 | |
| 215 | mutex_lock(&data->update_lock); |
| 216 | data->in_min[nr] = IN_TO_REG(val); |
| 217 | lm78_write_value(data, LM78_REG_IN_MIN(nr), data->in_min[nr]); |
| 218 | mutex_unlock(&data->update_lock); |
| 219 | return count; |
| 220 | } |
| 221 | |
| 222 | static ssize_t set_in_max(struct device *dev, struct device_attribute *da, |
| 223 | const char *buf, size_t count) |
| 224 | { |
| 225 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 226 | struct lm78_data *data = dev_get_drvdata(dev); |
| 227 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 228 | int nr = attr->index; |
| 229 | |
| 230 | mutex_lock(&data->update_lock); |
| 231 | data->in_max[nr] = IN_TO_REG(val); |
| 232 | lm78_write_value(data, LM78_REG_IN_MAX(nr), data->in_max[nr]); |
| 233 | mutex_unlock(&data->update_lock); |
| 234 | return count; |
| 235 | } |
| 236 | |
| 237 | #define show_in_offset(offset) \ |
| 238 | static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ |
| 239 | show_in, NULL, offset); \ |
| 240 | static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ |
| 241 | show_in_min, set_in_min, offset); \ |
| 242 | static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ |
| 243 | show_in_max, set_in_max, offset); |
| 244 | |
| 245 | show_in_offset(0); |
| 246 | show_in_offset(1); |
| 247 | show_in_offset(2); |
| 248 | show_in_offset(3); |
| 249 | show_in_offset(4); |
| 250 | show_in_offset(5); |
| 251 | show_in_offset(6); |
| 252 | |
| 253 | /* Temperature */ |
| 254 | static ssize_t show_temp(struct device *dev, struct device_attribute *da, |
| 255 | char *buf) |
| 256 | { |
| 257 | struct lm78_data *data = lm78_update_device(dev); |
| 258 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp)); |
| 259 | } |
| 260 | |
| 261 | static ssize_t show_temp_over(struct device *dev, struct device_attribute *da, |
| 262 | char *buf) |
| 263 | { |
| 264 | struct lm78_data *data = lm78_update_device(dev); |
| 265 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_over)); |
| 266 | } |
| 267 | |
| 268 | static ssize_t set_temp_over(struct device *dev, struct device_attribute *da, |
| 269 | const char *buf, size_t count) |
| 270 | { |
| 271 | struct lm78_data *data = dev_get_drvdata(dev); |
| 272 | long val = simple_strtol(buf, NULL, 10); |
| 273 | |
| 274 | mutex_lock(&data->update_lock); |
| 275 | data->temp_over = TEMP_TO_REG(val); |
| 276 | lm78_write_value(data, LM78_REG_TEMP_OVER, data->temp_over); |
| 277 | mutex_unlock(&data->update_lock); |
| 278 | return count; |
| 279 | } |
| 280 | |
| 281 | static ssize_t show_temp_hyst(struct device *dev, struct device_attribute *da, |
| 282 | char *buf) |
| 283 | { |
| 284 | struct lm78_data *data = lm78_update_device(dev); |
| 285 | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_hyst)); |
| 286 | } |
| 287 | |
| 288 | static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da, |
| 289 | const char *buf, size_t count) |
| 290 | { |
| 291 | struct lm78_data *data = dev_get_drvdata(dev); |
| 292 | long val = simple_strtol(buf, NULL, 10); |
| 293 | |
| 294 | mutex_lock(&data->update_lock); |
| 295 | data->temp_hyst = TEMP_TO_REG(val); |
| 296 | lm78_write_value(data, LM78_REG_TEMP_HYST, data->temp_hyst); |
| 297 | mutex_unlock(&data->update_lock); |
| 298 | return count; |
| 299 | } |
| 300 | |
| 301 | static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); |
| 302 | static DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR, |
| 303 | show_temp_over, set_temp_over); |
| 304 | static DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR, |
| 305 | show_temp_hyst, set_temp_hyst); |
| 306 | |
| 307 | /* 3 Fans */ |
| 308 | static ssize_t show_fan(struct device *dev, struct device_attribute *da, |
| 309 | char *buf) |
| 310 | { |
| 311 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 312 | struct lm78_data *data = lm78_update_device(dev); |
| 313 | int nr = attr->index; |
| 314 | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr], |
| 315 | DIV_FROM_REG(data->fan_div[nr])) ); |
| 316 | } |
| 317 | |
| 318 | static ssize_t show_fan_min(struct device *dev, struct device_attribute *da, |
| 319 | char *buf) |
| 320 | { |
| 321 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 322 | struct lm78_data *data = lm78_update_device(dev); |
| 323 | int nr = attr->index; |
| 324 | return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr], |
| 325 | DIV_FROM_REG(data->fan_div[nr])) ); |
| 326 | } |
| 327 | |
| 328 | static ssize_t set_fan_min(struct device *dev, struct device_attribute *da, |
| 329 | const char *buf, size_t count) |
| 330 | { |
| 331 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 332 | struct lm78_data *data = dev_get_drvdata(dev); |
| 333 | int nr = attr->index; |
| 334 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 335 | |
| 336 | mutex_lock(&data->update_lock); |
| 337 | data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); |
| 338 | lm78_write_value(data, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); |
| 339 | mutex_unlock(&data->update_lock); |
| 340 | return count; |
| 341 | } |
| 342 | |
| 343 | static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, |
| 344 | char *buf) |
| 345 | { |
| 346 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 347 | struct lm78_data *data = lm78_update_device(dev); |
| 348 | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); |
| 349 | } |
| 350 | |
| 351 | /* Note: we save and restore the fan minimum here, because its value is |
| 352 | determined in part by the fan divisor. This follows the principle of |
| 353 | least surprise; the user doesn't expect the fan minimum to change just |
| 354 | because the divisor changed. */ |
| 355 | static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, |
| 356 | const char *buf, size_t count) |
| 357 | { |
| 358 | struct sensor_device_attribute *attr = to_sensor_dev_attr(da); |
| 359 | struct lm78_data *data = dev_get_drvdata(dev); |
| 360 | int nr = attr->index; |
| 361 | unsigned long val = simple_strtoul(buf, NULL, 10); |
| 362 | unsigned long min; |
| 363 | u8 reg; |
| 364 | |
| 365 | mutex_lock(&data->update_lock); |
| 366 | min = FAN_FROM_REG(data->fan_min[nr], |
| 367 | DIV_FROM_REG(data->fan_div[nr])); |
| 368 | |
| 369 | switch (val) { |
| 370 | case 1: data->fan_div[nr] = 0; break; |
| 371 | case 2: data->fan_div[nr] = 1; break; |
| 372 | case 4: data->fan_div[nr] = 2; break; |
| 373 | case 8: data->fan_div[nr] = 3; break; |
| 374 | default: |
| 375 | dev_err(dev, "fan_div value %ld not " |
| 376 | "supported. Choose one of 1, 2, 4 or 8!\n", val); |
| 377 | mutex_unlock(&data->update_lock); |
| 378 | return -EINVAL; |
| 379 | } |
| 380 | |
| 381 | reg = lm78_read_value(data, LM78_REG_VID_FANDIV); |
| 382 | switch (nr) { |
| 383 | case 0: |
| 384 | reg = (reg & 0xcf) | (data->fan_div[nr] << 4); |
| 385 | break; |
| 386 | case 1: |
| 387 | reg = (reg & 0x3f) | (data->fan_div[nr] << 6); |
| 388 | break; |
| 389 | } |
| 390 | lm78_write_value(data, LM78_REG_VID_FANDIV, reg); |
| 391 | |
| 392 | data->fan_min[nr] = |
| 393 | FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); |
| 394 | lm78_write_value(data, LM78_REG_FAN_MIN(nr), data->fan_min[nr]); |
| 395 | mutex_unlock(&data->update_lock); |
| 396 | |
| 397 | return count; |
| 398 | } |
| 399 | |
| 400 | #define show_fan_offset(offset) \ |
| 401 | static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ |
| 402 | show_fan, NULL, offset - 1); \ |
| 403 | static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ |
| 404 | show_fan_min, set_fan_min, offset - 1); |
| 405 | |
| 406 | show_fan_offset(1); |
| 407 | show_fan_offset(2); |
| 408 | show_fan_offset(3); |
| 409 | |
| 410 | /* Fan 3 divisor is locked in H/W */ |
| 411 | static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, |
| 412 | show_fan_div, set_fan_div, 0); |
| 413 | static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, |
| 414 | show_fan_div, set_fan_div, 1); |
| 415 | static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO, show_fan_div, NULL, 2); |
| 416 | |
| 417 | /* VID */ |
| 418 | static ssize_t show_vid(struct device *dev, struct device_attribute *da, |
| 419 | char *buf) |
| 420 | { |
| 421 | struct lm78_data *data = lm78_update_device(dev); |
| 422 | return sprintf(buf, "%d\n", vid_from_reg(data->vid, 82)); |
| 423 | } |
| 424 | static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL); |
| 425 | |
| 426 | /* Alarms */ |
| 427 | static ssize_t show_alarms(struct device *dev, struct device_attribute *da, |
| 428 | char *buf) |
| 429 | { |
| 430 | struct lm78_data *data = lm78_update_device(dev); |
| 431 | return sprintf(buf, "%u\n", data->alarms); |
| 432 | } |
| 433 | static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); |
| 434 | |
| 435 | static ssize_t show_alarm(struct device *dev, struct device_attribute *da, |
| 436 | char *buf) |
| 437 | { |
| 438 | struct lm78_data *data = lm78_update_device(dev); |
| 439 | int nr = to_sensor_dev_attr(da)->index; |
| 440 | return sprintf(buf, "%u\n", (data->alarms >> nr) & 1); |
| 441 | } |
| 442 | static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); |
| 443 | static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); |
| 444 | static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); |
| 445 | static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); |
| 446 | static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); |
| 447 | static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); |
| 448 | static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); |
| 449 | static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); |
| 450 | static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); |
| 451 | static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); |
| 452 | static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); |
| 453 | |
| 454 | /* This function is called when: |
| 455 | * lm78_driver is inserted (when this module is loaded), for each |
| 456 | available adapter |
| 457 | * when a new adapter is inserted (and lm78_driver is still present) |
| 458 | We block updates of the ISA device to minimize the risk of concurrent |
| 459 | access to the same LM78 chip through different interfaces. */ |
| 460 | static int lm78_attach_adapter(struct i2c_adapter *adapter) |
| 461 | { |
| 462 | struct lm78_data *data; |
| 463 | int err; |
| 464 | |
| 465 | if (!(adapter->class & I2C_CLASS_HWMON)) |
| 466 | return 0; |
| 467 | |
| 468 | data = pdev ? platform_get_drvdata(pdev) : NULL; |
| 469 | if (data) |
| 470 | mutex_lock(&data->update_lock); |
| 471 | err = i2c_probe(adapter, &addr_data, lm78_detect); |
| 472 | if (data) |
| 473 | mutex_unlock(&data->update_lock); |
| 474 | return err; |
| 475 | } |
| 476 | |
| 477 | static struct attribute *lm78_attributes[] = { |
| 478 | &sensor_dev_attr_in0_input.dev_attr.attr, |
| 479 | &sensor_dev_attr_in0_min.dev_attr.attr, |
| 480 | &sensor_dev_attr_in0_max.dev_attr.attr, |
| 481 | &sensor_dev_attr_in0_alarm.dev_attr.attr, |
| 482 | &sensor_dev_attr_in1_input.dev_attr.attr, |
| 483 | &sensor_dev_attr_in1_min.dev_attr.attr, |
| 484 | &sensor_dev_attr_in1_max.dev_attr.attr, |
| 485 | &sensor_dev_attr_in1_alarm.dev_attr.attr, |
| 486 | &sensor_dev_attr_in2_input.dev_attr.attr, |
| 487 | &sensor_dev_attr_in2_min.dev_attr.attr, |
| 488 | &sensor_dev_attr_in2_max.dev_attr.attr, |
| 489 | &sensor_dev_attr_in2_alarm.dev_attr.attr, |
| 490 | &sensor_dev_attr_in3_input.dev_attr.attr, |
| 491 | &sensor_dev_attr_in3_min.dev_attr.attr, |
| 492 | &sensor_dev_attr_in3_max.dev_attr.attr, |
| 493 | &sensor_dev_attr_in3_alarm.dev_attr.attr, |
| 494 | &sensor_dev_attr_in4_input.dev_attr.attr, |
| 495 | &sensor_dev_attr_in4_min.dev_attr.attr, |
| 496 | &sensor_dev_attr_in4_max.dev_attr.attr, |
| 497 | &sensor_dev_attr_in4_alarm.dev_attr.attr, |
| 498 | &sensor_dev_attr_in5_input.dev_attr.attr, |
| 499 | &sensor_dev_attr_in5_min.dev_attr.attr, |
| 500 | &sensor_dev_attr_in5_max.dev_attr.attr, |
| 501 | &sensor_dev_attr_in5_alarm.dev_attr.attr, |
| 502 | &sensor_dev_attr_in6_input.dev_attr.attr, |
| 503 | &sensor_dev_attr_in6_min.dev_attr.attr, |
| 504 | &sensor_dev_attr_in6_max.dev_attr.attr, |
| 505 | &sensor_dev_attr_in6_alarm.dev_attr.attr, |
| 506 | &dev_attr_temp1_input.attr, |
| 507 | &dev_attr_temp1_max.attr, |
| 508 | &dev_attr_temp1_max_hyst.attr, |
| 509 | &sensor_dev_attr_temp1_alarm.dev_attr.attr, |
| 510 | &sensor_dev_attr_fan1_input.dev_attr.attr, |
| 511 | &sensor_dev_attr_fan1_min.dev_attr.attr, |
| 512 | &sensor_dev_attr_fan1_div.dev_attr.attr, |
| 513 | &sensor_dev_attr_fan1_alarm.dev_attr.attr, |
| 514 | &sensor_dev_attr_fan2_input.dev_attr.attr, |
| 515 | &sensor_dev_attr_fan2_min.dev_attr.attr, |
| 516 | &sensor_dev_attr_fan2_div.dev_attr.attr, |
| 517 | &sensor_dev_attr_fan2_alarm.dev_attr.attr, |
| 518 | &sensor_dev_attr_fan3_input.dev_attr.attr, |
| 519 | &sensor_dev_attr_fan3_min.dev_attr.attr, |
| 520 | &sensor_dev_attr_fan3_div.dev_attr.attr, |
| 521 | &sensor_dev_attr_fan3_alarm.dev_attr.attr, |
| 522 | &dev_attr_alarms.attr, |
| 523 | &dev_attr_cpu0_vid.attr, |
| 524 | |
| 525 | NULL |
| 526 | }; |
| 527 | |
| 528 | static const struct attribute_group lm78_group = { |
| 529 | .attrs = lm78_attributes, |
| 530 | }; |
| 531 | |
| 532 | /* I2C devices get this name attribute automatically, but for ISA devices |
| 533 | we must create it by ourselves. */ |
| 534 | static ssize_t show_name(struct device *dev, struct device_attribute |
| 535 | *devattr, char *buf) |
| 536 | { |
| 537 | struct lm78_data *data = dev_get_drvdata(dev); |
| 538 | |
| 539 | return sprintf(buf, "%s\n", data->client.name); |
| 540 | } |
| 541 | static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); |
| 542 | |
| 543 | /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */ |
| 544 | static int lm78_alias_detect(struct i2c_client *client, u8 chipid) |
| 545 | { |
| 546 | struct lm78_data *i2c, *isa; |
| 547 | int i; |
| 548 | |
| 549 | if (!pdev) /* No ISA chip */ |
| 550 | return 0; |
| 551 | |
| 552 | i2c = i2c_get_clientdata(client); |
| 553 | isa = platform_get_drvdata(pdev); |
| 554 | |
| 555 | if (lm78_read_value(isa, LM78_REG_I2C_ADDR) != client->addr) |
| 556 | return 0; /* Address doesn't match */ |
| 557 | if ((lm78_read_value(isa, LM78_REG_CHIPID) & 0xfe) != (chipid & 0xfe)) |
| 558 | return 0; /* Chip type doesn't match */ |
| 559 | |
| 560 | /* We compare all the limit registers, the config register and the |
| 561 | * interrupt mask registers */ |
| 562 | for (i = 0x2b; i <= 0x3d; i++) { |
| 563 | if (lm78_read_value(isa, i) != lm78_read_value(i2c, i)) |
| 564 | return 0; |
| 565 | } |
| 566 | if (lm78_read_value(isa, LM78_REG_CONFIG) != |
| 567 | lm78_read_value(i2c, LM78_REG_CONFIG)) |
| 568 | return 0; |
| 569 | for (i = 0x43; i <= 0x46; i++) { |
| 570 | if (lm78_read_value(isa, i) != lm78_read_value(i2c, i)) |
| 571 | return 0; |
| 572 | } |
| 573 | |
| 574 | return 1; |
| 575 | } |
| 576 | |
| 577 | /* This function is called by i2c_probe */ |
| 578 | static int lm78_detect(struct i2c_adapter *adapter, int address, int kind) |
| 579 | { |
| 580 | int i, err; |
| 581 | struct i2c_client *new_client; |
| 582 | struct lm78_data *data; |
| 583 | const char *client_name = ""; |
| 584 | |
| 585 | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { |
| 586 | err = -ENODEV; |
| 587 | goto ERROR1; |
| 588 | } |
| 589 | |
| 590 | /* OK. For now, we presume we have a valid client. We now create the |
| 591 | client structure, even though we cannot fill it completely yet. |
| 592 | But it allows us to access lm78_{read,write}_value. */ |
| 593 | |
| 594 | if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { |
| 595 | err = -ENOMEM; |
| 596 | goto ERROR1; |
| 597 | } |
| 598 | |
| 599 | new_client = &data->client; |
| 600 | i2c_set_clientdata(new_client, data); |
| 601 | new_client->addr = address; |
| 602 | new_client->adapter = adapter; |
| 603 | new_client->driver = &lm78_driver; |
| 604 | |
| 605 | /* Now, we do the remaining detection. */ |
| 606 | if (kind < 0) { |
| 607 | if (lm78_read_value(data, LM78_REG_CONFIG) & 0x80) { |
| 608 | err = -ENODEV; |
| 609 | goto ERROR2; |
| 610 | } |
| 611 | if (lm78_read_value(data, LM78_REG_I2C_ADDR) != |
| 612 | address) { |
| 613 | err = -ENODEV; |
| 614 | goto ERROR2; |
| 615 | } |
| 616 | /* Explicitly prevent the misdetection of Winbond chips */ |
| 617 | i = lm78_read_value(data, 0x4f); |
| 618 | if (i == 0xa3 || i == 0x5c) { |
| 619 | err = -ENODEV; |
| 620 | goto ERROR2; |
| 621 | } |
| 622 | } |
| 623 | |
| 624 | /* Determine the chip type. */ |
| 625 | if (kind <= 0) { |
| 626 | i = lm78_read_value(data, LM78_REG_CHIPID); |
| 627 | if (i == 0x00 || i == 0x20 /* LM78 */ |
| 628 | || i == 0x40) /* LM78-J */ |
| 629 | kind = lm78; |
| 630 | else if ((i & 0xfe) == 0xc0) |
| 631 | kind = lm79; |
| 632 | else { |
| 633 | if (kind == 0) |
| 634 | dev_warn(&adapter->dev, "Ignoring 'force' " |
| 635 | "parameter for unknown chip at " |
| 636 | "adapter %d, address 0x%02x\n", |
| 637 | i2c_adapter_id(adapter), address); |
| 638 | err = -ENODEV; |
| 639 | goto ERROR2; |
| 640 | } |
| 641 | |
| 642 | if (lm78_alias_detect(new_client, i)) { |
| 643 | dev_dbg(&adapter->dev, "Device at 0x%02x appears to " |
| 644 | "be the same as ISA device\n", address); |
| 645 | err = -ENODEV; |
| 646 | goto ERROR2; |
| 647 | } |
| 648 | } |
| 649 | |
| 650 | if (kind == lm78) { |
| 651 | client_name = "lm78"; |
| 652 | } else if (kind == lm79) { |
| 653 | client_name = "lm79"; |
| 654 | } |
| 655 | |
| 656 | /* Fill in the remaining client fields and put into the global list */ |
| 657 | strlcpy(new_client->name, client_name, I2C_NAME_SIZE); |
| 658 | data->type = kind; |
| 659 | |
| 660 | /* Tell the I2C layer a new client has arrived */ |
| 661 | if ((err = i2c_attach_client(new_client))) |
| 662 | goto ERROR2; |
| 663 | |
| 664 | /* Initialize the LM78 chip */ |
| 665 | lm78_init_device(data); |
| 666 | |
| 667 | /* Register sysfs hooks */ |
| 668 | if ((err = sysfs_create_group(&new_client->dev.kobj, &lm78_group))) |
| 669 | goto ERROR3; |
| 670 | |
| 671 | data->hwmon_dev = hwmon_device_register(&new_client->dev); |
| 672 | if (IS_ERR(data->hwmon_dev)) { |
| 673 | err = PTR_ERR(data->hwmon_dev); |
| 674 | goto ERROR4; |
| 675 | } |
| 676 | |
| 677 | return 0; |
| 678 | |
| 679 | ERROR4: |
| 680 | sysfs_remove_group(&new_client->dev.kobj, &lm78_group); |
| 681 | ERROR3: |
| 682 | i2c_detach_client(new_client); |
| 683 | ERROR2: |
| 684 | kfree(data); |
| 685 | ERROR1: |
| 686 | return err; |
| 687 | } |
| 688 | |
| 689 | static int lm78_detach_client(struct i2c_client *client) |
| 690 | { |
| 691 | struct lm78_data *data = i2c_get_clientdata(client); |
| 692 | int err; |
| 693 | |
| 694 | hwmon_device_unregister(data->hwmon_dev); |
| 695 | sysfs_remove_group(&client->dev.kobj, &lm78_group); |
| 696 | |
| 697 | if ((err = i2c_detach_client(client))) |
| 698 | return err; |
| 699 | |
| 700 | kfree(data); |
| 701 | |
| 702 | return 0; |
| 703 | } |
| 704 | |
| 705 | static int __devinit lm78_isa_probe(struct platform_device *pdev) |
| 706 | { |
| 707 | int err; |
| 708 | struct lm78_data *data; |
| 709 | struct resource *res; |
| 710 | const char *name; |
| 711 | |
| 712 | /* Reserve the ISA region */ |
| 713 | res = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| 714 | if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) { |
| 715 | err = -EBUSY; |
| 716 | goto exit; |
| 717 | } |
| 718 | |
| 719 | if (!(data = kzalloc(sizeof(struct lm78_data), GFP_KERNEL))) { |
| 720 | err = -ENOMEM; |
| 721 | goto exit_release_region; |
| 722 | } |
| 723 | mutex_init(&data->lock); |
| 724 | data->client.addr = res->start; |
| 725 | i2c_set_clientdata(&data->client, data); |
| 726 | platform_set_drvdata(pdev, data); |
| 727 | |
| 728 | if (lm78_read_value(data, LM78_REG_CHIPID) & 0x80) { |
| 729 | data->type = lm79; |
| 730 | name = "lm79"; |
| 731 | } else { |
| 732 | data->type = lm78; |
| 733 | name = "lm78"; |
| 734 | } |
| 735 | strlcpy(data->client.name, name, I2C_NAME_SIZE); |
| 736 | |
| 737 | /* Initialize the LM78 chip */ |
| 738 | lm78_init_device(data); |
| 739 | |
| 740 | /* Register sysfs hooks */ |
| 741 | if ((err = sysfs_create_group(&pdev->dev.kobj, &lm78_group)) |
| 742 | || (err = device_create_file(&pdev->dev, &dev_attr_name))) |
| 743 | goto exit_remove_files; |
| 744 | |
| 745 | data->hwmon_dev = hwmon_device_register(&pdev->dev); |
| 746 | if (IS_ERR(data->hwmon_dev)) { |
| 747 | err = PTR_ERR(data->hwmon_dev); |
| 748 | goto exit_remove_files; |
| 749 | } |
| 750 | |
| 751 | return 0; |
| 752 | |
| 753 | exit_remove_files: |
| 754 | sysfs_remove_group(&pdev->dev.kobj, &lm78_group); |
| 755 | device_remove_file(&pdev->dev, &dev_attr_name); |
| 756 | kfree(data); |
| 757 | exit_release_region: |
| 758 | release_region(res->start + LM78_ADDR_REG_OFFSET, 2); |
| 759 | exit: |
| 760 | return err; |
| 761 | } |
| 762 | |
| 763 | static int __devexit lm78_isa_remove(struct platform_device *pdev) |
| 764 | { |
| 765 | struct lm78_data *data = platform_get_drvdata(pdev); |
| 766 | |
| 767 | hwmon_device_unregister(data->hwmon_dev); |
| 768 | sysfs_remove_group(&pdev->dev.kobj, &lm78_group); |
| 769 | device_remove_file(&pdev->dev, &dev_attr_name); |
| 770 | release_region(data->client.addr + LM78_ADDR_REG_OFFSET, 2); |
| 771 | kfree(data); |
| 772 | |
| 773 | return 0; |
| 774 | } |
| 775 | |
| 776 | /* The SMBus locks itself, but ISA access must be locked explicitly! |
| 777 | We don't want to lock the whole ISA bus, so we lock each client |
| 778 | separately. |
| 779 | We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, |
| 780 | would slow down the LM78 access and should not be necessary. */ |
| 781 | static int lm78_read_value(struct lm78_data *data, u8 reg) |
| 782 | { |
| 783 | struct i2c_client *client = &data->client; |
| 784 | |
| 785 | if (!client->driver) { /* ISA device */ |
| 786 | int res; |
| 787 | mutex_lock(&data->lock); |
| 788 | outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); |
| 789 | res = inb_p(client->addr + LM78_DATA_REG_OFFSET); |
| 790 | mutex_unlock(&data->lock); |
| 791 | return res; |
| 792 | } else |
| 793 | return i2c_smbus_read_byte_data(client, reg); |
| 794 | } |
| 795 | |
| 796 | /* The SMBus locks itself, but ISA access muse be locked explicitly! |
| 797 | We don't want to lock the whole ISA bus, so we lock each client |
| 798 | separately. |
| 799 | We ignore the LM78 BUSY flag at this moment - it could lead to deadlocks, |
| 800 | would slow down the LM78 access and should not be necessary. |
| 801 | There are some ugly typecasts here, but the good new is - they should |
| 802 | nowhere else be necessary! */ |
| 803 | static int lm78_write_value(struct lm78_data *data, u8 reg, u8 value) |
| 804 | { |
| 805 | struct i2c_client *client = &data->client; |
| 806 | |
| 807 | if (!client->driver) { /* ISA device */ |
| 808 | mutex_lock(&data->lock); |
| 809 | outb_p(reg, client->addr + LM78_ADDR_REG_OFFSET); |
| 810 | outb_p(value, client->addr + LM78_DATA_REG_OFFSET); |
| 811 | mutex_unlock(&data->lock); |
| 812 | return 0; |
| 813 | } else |
| 814 | return i2c_smbus_write_byte_data(client, reg, value); |
| 815 | } |
| 816 | |
| 817 | static void lm78_init_device(struct lm78_data *data) |
| 818 | { |
| 819 | u8 config; |
| 820 | int i; |
| 821 | |
| 822 | /* Start monitoring */ |
| 823 | config = lm78_read_value(data, LM78_REG_CONFIG); |
| 824 | if ((config & 0x09) != 0x01) |
| 825 | lm78_write_value(data, LM78_REG_CONFIG, |
| 826 | (config & 0xf7) | 0x01); |
| 827 | |
| 828 | /* A few vars need to be filled upon startup */ |
| 829 | for (i = 0; i < 3; i++) { |
| 830 | data->fan_min[i] = lm78_read_value(data, |
| 831 | LM78_REG_FAN_MIN(i)); |
| 832 | } |
| 833 | |
| 834 | mutex_init(&data->update_lock); |
| 835 | } |
| 836 | |
| 837 | static struct lm78_data *lm78_update_device(struct device *dev) |
| 838 | { |
| 839 | struct lm78_data *data = dev_get_drvdata(dev); |
| 840 | int i; |
| 841 | |
| 842 | mutex_lock(&data->update_lock); |
| 843 | |
| 844 | if (time_after(jiffies, data->last_updated + HZ + HZ / 2) |
| 845 | || !data->valid) { |
| 846 | |
| 847 | dev_dbg(dev, "Starting lm78 update\n"); |
| 848 | |
| 849 | for (i = 0; i <= 6; i++) { |
| 850 | data->in[i] = |
| 851 | lm78_read_value(data, LM78_REG_IN(i)); |
| 852 | data->in_min[i] = |
| 853 | lm78_read_value(data, LM78_REG_IN_MIN(i)); |
| 854 | data->in_max[i] = |
| 855 | lm78_read_value(data, LM78_REG_IN_MAX(i)); |
| 856 | } |
| 857 | for (i = 0; i < 3; i++) { |
| 858 | data->fan[i] = |
| 859 | lm78_read_value(data, LM78_REG_FAN(i)); |
| 860 | data->fan_min[i] = |
| 861 | lm78_read_value(data, LM78_REG_FAN_MIN(i)); |
| 862 | } |
| 863 | data->temp = lm78_read_value(data, LM78_REG_TEMP); |
| 864 | data->temp_over = |
| 865 | lm78_read_value(data, LM78_REG_TEMP_OVER); |
| 866 | data->temp_hyst = |
| 867 | lm78_read_value(data, LM78_REG_TEMP_HYST); |
| 868 | i = lm78_read_value(data, LM78_REG_VID_FANDIV); |
| 869 | data->vid = i & 0x0f; |
| 870 | if (data->type == lm79) |
| 871 | data->vid |= |
| 872 | (lm78_read_value(data, LM78_REG_CHIPID) & |
| 873 | 0x01) << 4; |
| 874 | else |
| 875 | data->vid |= 0x10; |
| 876 | data->fan_div[0] = (i >> 4) & 0x03; |
| 877 | data->fan_div[1] = i >> 6; |
| 878 | data->alarms = lm78_read_value(data, LM78_REG_ALARM1) + |
| 879 | (lm78_read_value(data, LM78_REG_ALARM2) << 8); |
| 880 | data->last_updated = jiffies; |
| 881 | data->valid = 1; |
| 882 | |
| 883 | data->fan_div[2] = 1; |
| 884 | } |
| 885 | |
| 886 | mutex_unlock(&data->update_lock); |
| 887 | |
| 888 | return data; |
| 889 | } |
| 890 | |
| 891 | /* return 1 if a supported chip is found, 0 otherwise */ |
| 892 | static int __init lm78_isa_found(unsigned short address) |
| 893 | { |
| 894 | int val, save, found = 0; |
| 895 | |
| 896 | /* We have to request the region in two parts because some |
| 897 | boards declare base+4 to base+7 as a PNP device */ |
| 898 | if (!request_region(address, 4, "lm78")) { |
| 899 | pr_debug("lm78: Failed to request low part of region\n"); |
| 900 | return 0; |
| 901 | } |
| 902 | if (!request_region(address + 4, 4, "lm78")) { |
| 903 | pr_debug("lm78: Failed to request high part of region\n"); |
| 904 | release_region(address, 4); |
| 905 | return 0; |
| 906 | } |
| 907 | |
| 908 | #define REALLY_SLOW_IO |
| 909 | /* We need the timeouts for at least some LM78-like |
| 910 | chips. But only if we read 'undefined' registers. */ |
| 911 | val = inb_p(address + 1); |
| 912 | if (inb_p(address + 2) != val |
| 913 | || inb_p(address + 3) != val |
| 914 | || inb_p(address + 7) != val) |
| 915 | goto release; |
| 916 | #undef REALLY_SLOW_IO |
| 917 | |
| 918 | /* We should be able to change the 7 LSB of the address port. The |
| 919 | MSB (busy flag) should be clear initially, set after the write. */ |
| 920 | save = inb_p(address + LM78_ADDR_REG_OFFSET); |
| 921 | if (save & 0x80) |
| 922 | goto release; |
| 923 | val = ~save & 0x7f; |
| 924 | outb_p(val, address + LM78_ADDR_REG_OFFSET); |
| 925 | if (inb_p(address + LM78_ADDR_REG_OFFSET) != (val | 0x80)) { |
| 926 | outb_p(save, address + LM78_ADDR_REG_OFFSET); |
| 927 | goto release; |
| 928 | } |
| 929 | |
| 930 | /* We found a device, now see if it could be an LM78 */ |
| 931 | outb_p(LM78_REG_CONFIG, address + LM78_ADDR_REG_OFFSET); |
| 932 | val = inb_p(address + LM78_DATA_REG_OFFSET); |
| 933 | if (val & 0x80) |
| 934 | goto release; |
| 935 | outb_p(LM78_REG_I2C_ADDR, address + LM78_ADDR_REG_OFFSET); |
| 936 | val = inb_p(address + LM78_DATA_REG_OFFSET); |
| 937 | if (val < 0x03 || val > 0x77) /* Not a valid I2C address */ |
| 938 | goto release; |
| 939 | |
| 940 | /* The busy flag should be clear again */ |
| 941 | if (inb_p(address + LM78_ADDR_REG_OFFSET) & 0x80) |
| 942 | goto release; |
| 943 | |
| 944 | /* Explicitly prevent the misdetection of Winbond chips */ |
| 945 | outb_p(0x4f, address + LM78_ADDR_REG_OFFSET); |
| 946 | val = inb_p(address + LM78_DATA_REG_OFFSET); |
| 947 | if (val == 0xa3 || val == 0x5c) |
| 948 | goto release; |
| 949 | |
| 950 | /* Explicitly prevent the misdetection of ITE chips */ |
| 951 | outb_p(0x58, address + LM78_ADDR_REG_OFFSET); |
| 952 | val = inb_p(address + LM78_DATA_REG_OFFSET); |
| 953 | if (val == 0x90) |
| 954 | goto release; |
| 955 | |
| 956 | /* Determine the chip type */ |
| 957 | outb_p(LM78_REG_CHIPID, address + LM78_ADDR_REG_OFFSET); |
| 958 | val = inb_p(address + LM78_DATA_REG_OFFSET); |
| 959 | if (val == 0x00 || val == 0x20 /* LM78 */ |
| 960 | || val == 0x40 /* LM78-J */ |
| 961 | || (val & 0xfe) == 0xc0) /* LM79 */ |
| 962 | found = 1; |
| 963 | |
| 964 | if (found) |
| 965 | pr_info("lm78: Found an %s chip at %#x\n", |
| 966 | val & 0x80 ? "LM79" : "LM78", (int)address); |
| 967 | |
| 968 | release: |
| 969 | release_region(address + 4, 4); |
| 970 | release_region(address, 4); |
| 971 | return found; |
| 972 | } |
| 973 | |
| 974 | static int __init lm78_isa_device_add(unsigned short address) |
| 975 | { |
| 976 | struct resource res = { |
| 977 | .start = address, |
| 978 | .end = address + LM78_EXTENT - 1, |
| 979 | .name = "lm78", |
| 980 | .flags = IORESOURCE_IO, |
| 981 | }; |
| 982 | int err; |
| 983 | |
| 984 | pdev = platform_device_alloc("lm78", address); |
| 985 | if (!pdev) { |
| 986 | err = -ENOMEM; |
| 987 | printk(KERN_ERR "lm78: Device allocation failed\n"); |
| 988 | goto exit; |
| 989 | } |
| 990 | |
| 991 | err = platform_device_add_resources(pdev, &res, 1); |
| 992 | if (err) { |
| 993 | printk(KERN_ERR "lm78: Device resource addition failed " |
| 994 | "(%d)\n", err); |
| 995 | goto exit_device_put; |
| 996 | } |
| 997 | |
| 998 | err = platform_device_add(pdev); |
| 999 | if (err) { |
| 1000 | printk(KERN_ERR "lm78: Device addition failed (%d)\n", |
| 1001 | err); |
| 1002 | goto exit_device_put; |
| 1003 | } |
| 1004 | |
| 1005 | return 0; |
| 1006 | |
| 1007 | exit_device_put: |
| 1008 | platform_device_put(pdev); |
| 1009 | exit: |
| 1010 | pdev = NULL; |
| 1011 | return err; |
| 1012 | } |
| 1013 | |
| 1014 | static int __init sm_lm78_init(void) |
| 1015 | { |
| 1016 | int res; |
| 1017 | |
| 1018 | /* We register the ISA device first, so that we can skip the |
| 1019 | * registration of an I2C interface to the same device. */ |
| 1020 | if (lm78_isa_found(isa_address)) { |
| 1021 | res = platform_driver_register(&lm78_isa_driver); |
| 1022 | if (res) |
| 1023 | goto exit; |
| 1024 | |
| 1025 | /* Sets global pdev as a side effect */ |
| 1026 | res = lm78_isa_device_add(isa_address); |
| 1027 | if (res) |
| 1028 | goto exit_unreg_isa_driver; |
| 1029 | } |
| 1030 | |
| 1031 | res = i2c_add_driver(&lm78_driver); |
| 1032 | if (res) |
| 1033 | goto exit_unreg_isa_device; |
| 1034 | |
| 1035 | return 0; |
| 1036 | |
| 1037 | exit_unreg_isa_device: |
| 1038 | platform_device_unregister(pdev); |
| 1039 | exit_unreg_isa_driver: |
| 1040 | platform_driver_unregister(&lm78_isa_driver); |
| 1041 | exit: |
| 1042 | return res; |
| 1043 | } |
| 1044 | |
| 1045 | static void __exit sm_lm78_exit(void) |
| 1046 | { |
| 1047 | if (pdev) { |
| 1048 | platform_device_unregister(pdev); |
| 1049 | platform_driver_unregister(&lm78_isa_driver); |
| 1050 | } |
| 1051 | i2c_del_driver(&lm78_driver); |
| 1052 | } |
| 1053 | |
| 1054 | |
| 1055 | |
| 1056 | MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); |
| 1057 | MODULE_DESCRIPTION("LM78/LM79 driver"); |
| 1058 | MODULE_LICENSE("GPL"); |
| 1059 | |
| 1060 | module_init(sm_lm78_init); |
| 1061 | module_exit(sm_lm78_exit); |