| 1 | /* tc-arc.c -- Assembler for the ARC |
| 2 | Copyright 1994, 1995, 1997, 1999, 2000, 2001, 2002, 2003, 2004, 2005, |
| 3 | 2006, 2007, 2009, 2011 Free Software Foundation, Inc. |
| 4 | Contributed by Doug Evans (dje@cygnus.com). |
| 5 | |
| 6 | This file is part of GAS, the GNU Assembler. |
| 7 | |
| 8 | GAS is free software; you can redistribute it and/or modify |
| 9 | it under the terms of the GNU General Public License as published by |
| 10 | the Free Software Foundation; either version 3, or (at your option) |
| 11 | any later version. |
| 12 | |
| 13 | GAS is distributed in the hope that it will be useful, |
| 14 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 15 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 16 | GNU General Public License for more details. |
| 17 | |
| 18 | You should have received a copy of the GNU General Public License |
| 19 | along with GAS; see the file COPYING. If not, write to the Free |
| 20 | Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA |
| 21 | 02110-1301, USA. */ |
| 22 | |
| 23 | #include "as.h" |
| 24 | #include "struc-symbol.h" |
| 25 | #include "safe-ctype.h" |
| 26 | #include "subsegs.h" |
| 27 | #include "opcode/arc.h" |
| 28 | #include "../opcodes/arc-ext.h" |
| 29 | #include "elf/arc.h" |
| 30 | #include "dwarf2dbg.h" |
| 31 | |
| 32 | const struct suffix_classes |
| 33 | { |
| 34 | char *name; |
| 35 | int len; |
| 36 | } suffixclass[] = |
| 37 | { |
| 38 | { "SUFFIX_COND|SUFFIX_FLAG",23 }, |
| 39 | { "SUFFIX_FLAG", 11 }, |
| 40 | { "SUFFIX_COND", 11 }, |
| 41 | { "SUFFIX_NONE", 11 } |
| 42 | }; |
| 43 | |
| 44 | #define MAXSUFFIXCLASS (sizeof (suffixclass) / sizeof (struct suffix_classes)) |
| 45 | |
| 46 | const struct syntax_classes |
| 47 | { |
| 48 | char *name; |
| 49 | int len; |
| 50 | int s_class; |
| 51 | } syntaxclass[] = |
| 52 | { |
| 53 | { "SYNTAX_3OP|OP1_MUST_BE_IMM", 26, SYNTAX_3OP|OP1_MUST_BE_IMM|SYNTAX_VALID }, |
| 54 | { "OP1_MUST_BE_IMM|SYNTAX_3OP", 26, OP1_MUST_BE_IMM|SYNTAX_3OP|SYNTAX_VALID }, |
| 55 | { "SYNTAX_2OP|OP1_IMM_IMPLIED", 26, SYNTAX_2OP|OP1_IMM_IMPLIED|SYNTAX_VALID }, |
| 56 | { "OP1_IMM_IMPLIED|SYNTAX_2OP", 26, OP1_IMM_IMPLIED|SYNTAX_2OP|SYNTAX_VALID }, |
| 57 | { "SYNTAX_3OP", 10, SYNTAX_3OP|SYNTAX_VALID }, |
| 58 | { "SYNTAX_2OP", 10, SYNTAX_2OP|SYNTAX_VALID } |
| 59 | }; |
| 60 | |
| 61 | #define MAXSYNTAXCLASS (sizeof (syntaxclass) / sizeof (struct syntax_classes)) |
| 62 | |
| 63 | /* This array holds the chars that always start a comment. If the |
| 64 | pre-processor is disabled, these aren't very useful. */ |
| 65 | const char comment_chars[] = "#;"; |
| 66 | |
| 67 | /* This array holds the chars that only start a comment at the beginning of |
| 68 | a line. If the line seems to have the form '# 123 filename' |
| 69 | .line and .file directives will appear in the pre-processed output */ |
| 70 | /* Note that input_file.c hand checks for '#' at the beginning of the |
| 71 | first line of the input file. This is because the compiler outputs |
| 72 | #NO_APP at the beginning of its output. */ |
| 73 | /* Also note that comments started like this one will always |
| 74 | work if '/' isn't otherwise defined. */ |
| 75 | const char line_comment_chars[] = "#"; |
| 76 | |
| 77 | const char line_separator_chars[] = ""; |
| 78 | |
| 79 | /* Chars that can be used to separate mant from exp in floating point nums. */ |
| 80 | const char EXP_CHARS[] = "eE"; |
| 81 | |
| 82 | /* Chars that mean this number is a floating point constant |
| 83 | As in 0f12.456 or 0d1.2345e12. */ |
| 84 | const char FLT_CHARS[] = "rRsSfFdD"; |
| 85 | |
| 86 | /* Byte order. */ |
| 87 | extern int target_big_endian; |
| 88 | const char *arc_target_format = DEFAULT_TARGET_FORMAT; |
| 89 | static int byte_order = DEFAULT_BYTE_ORDER; |
| 90 | |
| 91 | static segT arcext_section; |
| 92 | |
| 93 | /* One of bfd_mach_arc_n. */ |
| 94 | static int arc_mach_type = bfd_mach_arc_6; |
| 95 | |
| 96 | /* Non-zero if the cpu type has been explicitly specified. */ |
| 97 | static int mach_type_specified_p = 0; |
| 98 | |
| 99 | /* Non-zero if opcode tables have been initialized. |
| 100 | A .option command must appear before any instructions. */ |
| 101 | static int cpu_tables_init_p = 0; |
| 102 | |
| 103 | static struct hash_control *arc_suffix_hash = NULL; |
| 104 | \f |
| 105 | const char *md_shortopts = ""; |
| 106 | |
| 107 | enum options |
| 108 | { |
| 109 | OPTION_EB = OPTION_MD_BASE, |
| 110 | OPTION_EL, |
| 111 | OPTION_ARC5, |
| 112 | OPTION_ARC6, |
| 113 | OPTION_ARC7, |
| 114 | OPTION_ARC8, |
| 115 | OPTION_ARC |
| 116 | }; |
| 117 | |
| 118 | struct option md_longopts[] = |
| 119 | { |
| 120 | { "EB", no_argument, NULL, OPTION_EB }, |
| 121 | { "EL", no_argument, NULL, OPTION_EL }, |
| 122 | { "marc5", no_argument, NULL, OPTION_ARC5 }, |
| 123 | { "pre-v6", no_argument, NULL, OPTION_ARC5 }, |
| 124 | { "marc6", no_argument, NULL, OPTION_ARC6 }, |
| 125 | { "marc7", no_argument, NULL, OPTION_ARC7 }, |
| 126 | { "marc8", no_argument, NULL, OPTION_ARC8 }, |
| 127 | { "marc", no_argument, NULL, OPTION_ARC }, |
| 128 | { NULL, no_argument, NULL, 0 } |
| 129 | }; |
| 130 | size_t md_longopts_size = sizeof (md_longopts); |
| 131 | |
| 132 | #define IS_SYMBOL_OPERAND(o) \ |
| 133 | ((o) == 'b' || (o) == 'c' || (o) == 's' || (o) == 'o' || (o) == 'O') |
| 134 | |
| 135 | struct arc_operand_value *get_ext_suffix (char *s); |
| 136 | |
| 137 | /* Invocation line includes a switch not recognized by the base assembler. |
| 138 | See if it's a processor-specific option. */ |
| 139 | |
| 140 | int |
| 141 | md_parse_option (int c, char *arg ATTRIBUTE_UNUSED) |
| 142 | { |
| 143 | switch (c) |
| 144 | { |
| 145 | case OPTION_ARC5: |
| 146 | arc_mach_type = bfd_mach_arc_5; |
| 147 | break; |
| 148 | case OPTION_ARC: |
| 149 | case OPTION_ARC6: |
| 150 | arc_mach_type = bfd_mach_arc_6; |
| 151 | break; |
| 152 | case OPTION_ARC7: |
| 153 | arc_mach_type = bfd_mach_arc_7; |
| 154 | break; |
| 155 | case OPTION_ARC8: |
| 156 | arc_mach_type = bfd_mach_arc_8; |
| 157 | break; |
| 158 | case OPTION_EB: |
| 159 | byte_order = BIG_ENDIAN; |
| 160 | arc_target_format = "elf32-bigarc"; |
| 161 | break; |
| 162 | case OPTION_EL: |
| 163 | byte_order = LITTLE_ENDIAN; |
| 164 | arc_target_format = "elf32-littlearc"; |
| 165 | break; |
| 166 | default: |
| 167 | return 0; |
| 168 | } |
| 169 | return 1; |
| 170 | } |
| 171 | |
| 172 | void |
| 173 | md_show_usage (FILE *stream) |
| 174 | { |
| 175 | fprintf (stream, "\ |
| 176 | ARC Options:\n\ |
| 177 | -marc[5|6|7|8] select processor variant (default arc%d)\n\ |
| 178 | -EB assemble code for a big endian cpu\n\ |
| 179 | -EL assemble code for a little endian cpu\n", arc_mach_type + 5); |
| 180 | } |
| 181 | |
| 182 | /* This function is called once, at assembler startup time. It should |
| 183 | set up all the tables, etc. that the MD part of the assembler will need. |
| 184 | Opcode selection is deferred until later because we might see a .option |
| 185 | command. */ |
| 186 | |
| 187 | void |
| 188 | md_begin (void) |
| 189 | { |
| 190 | /* The endianness can be chosen "at the factory". */ |
| 191 | target_big_endian = byte_order == BIG_ENDIAN; |
| 192 | |
| 193 | if (!bfd_set_arch_mach (stdoutput, bfd_arch_arc, arc_mach_type)) |
| 194 | as_warn (_("could not set architecture and machine")); |
| 195 | |
| 196 | /* This call is necessary because we need to initialize `arc_operand_map' |
| 197 | which may be needed before we see the first insn. */ |
| 198 | arc_opcode_init_tables (arc_get_opcode_mach (arc_mach_type, |
| 199 | target_big_endian)); |
| 200 | } |
| 201 | |
| 202 | /* Initialize the various opcode and operand tables. |
| 203 | MACH is one of bfd_mach_arc_xxx. */ |
| 204 | |
| 205 | static void |
| 206 | init_opcode_tables (int mach) |
| 207 | { |
| 208 | int i; |
| 209 | char *last; |
| 210 | |
| 211 | if ((arc_suffix_hash = hash_new ()) == NULL) |
| 212 | as_fatal (_("virtual memory exhausted")); |
| 213 | |
| 214 | if (!bfd_set_arch_mach (stdoutput, bfd_arch_arc, mach)) |
| 215 | as_warn (_("could not set architecture and machine")); |
| 216 | |
| 217 | /* This initializes a few things in arc-opc.c that we need. |
| 218 | This must be called before the various arc_xxx_supported fns. */ |
| 219 | arc_opcode_init_tables (arc_get_opcode_mach (mach, target_big_endian)); |
| 220 | |
| 221 | /* Only put the first entry of each equivalently named suffix in the |
| 222 | table. */ |
| 223 | last = ""; |
| 224 | for (i = 0; i < arc_suffixes_count; i++) |
| 225 | { |
| 226 | if (strcmp (arc_suffixes[i].name, last) != 0) |
| 227 | hash_insert (arc_suffix_hash, arc_suffixes[i].name, (void *) (arc_suffixes + i)); |
| 228 | last = arc_suffixes[i].name; |
| 229 | } |
| 230 | |
| 231 | /* Since registers don't have a prefix, we put them in the symbol table so |
| 232 | they can't be used as symbols. This also simplifies argument parsing as |
| 233 | we can let gas parse registers for us. The recorded register number is |
| 234 | the address of the register's entry in arc_reg_names. |
| 235 | |
| 236 | If the register name is already in the table, then the existing |
| 237 | definition is assumed to be from an .ExtCoreRegister pseudo-op. */ |
| 238 | |
| 239 | for (i = 0; i < arc_reg_names_count; i++) |
| 240 | { |
| 241 | if (symbol_find (arc_reg_names[i].name)) |
| 242 | continue; |
| 243 | /* Use symbol_create here instead of symbol_new so we don't try to |
| 244 | output registers into the object file's symbol table. */ |
| 245 | symbol_table_insert (symbol_create (arc_reg_names[i].name, |
| 246 | reg_section, |
| 247 | (valueT) &arc_reg_names[i], |
| 248 | &zero_address_frag)); |
| 249 | } |
| 250 | |
| 251 | /* Tell `.option' it's too late. */ |
| 252 | cpu_tables_init_p = 1; |
| 253 | } |
| 254 | \f |
| 255 | /* Insert an operand value into an instruction. |
| 256 | If REG is non-NULL, it is a register number and ignore VAL. */ |
| 257 | |
| 258 | static arc_insn |
| 259 | arc_insert_operand (arc_insn insn, |
| 260 | const struct arc_operand *operand, |
| 261 | int mods, |
| 262 | const struct arc_operand_value *reg, |
| 263 | offsetT val, |
| 264 | char *file, |
| 265 | unsigned int line) |
| 266 | { |
| 267 | if (operand->bits != 32) |
| 268 | { |
| 269 | long min, max; |
| 270 | offsetT test; |
| 271 | |
| 272 | if ((operand->flags & ARC_OPERAND_SIGNED) != 0) |
| 273 | { |
| 274 | if ((operand->flags & ARC_OPERAND_SIGNOPT) != 0) |
| 275 | max = (1 << operand->bits) - 1; |
| 276 | else |
| 277 | max = (1 << (operand->bits - 1)) - 1; |
| 278 | min = - (1 << (operand->bits - 1)); |
| 279 | } |
| 280 | else |
| 281 | { |
| 282 | max = (1 << operand->bits) - 1; |
| 283 | min = 0; |
| 284 | } |
| 285 | |
| 286 | if ((operand->flags & ARC_OPERAND_NEGATIVE) != 0) |
| 287 | test = - val; |
| 288 | else |
| 289 | test = val; |
| 290 | |
| 291 | if (test < (offsetT) min || test > (offsetT) max) |
| 292 | as_warn_value_out_of_range (_("operand"), test, (offsetT) min, (offsetT) max, file, line); |
| 293 | } |
| 294 | |
| 295 | if (operand->insert) |
| 296 | { |
| 297 | const char *errmsg; |
| 298 | |
| 299 | errmsg = NULL; |
| 300 | insn = (*operand->insert) (insn, operand, mods, reg, (long) val, &errmsg); |
| 301 | if (errmsg != (const char *) NULL) |
| 302 | as_warn ("%s", errmsg); |
| 303 | } |
| 304 | else |
| 305 | insn |= (((long) val & ((1 << operand->bits) - 1)) |
| 306 | << operand->shift); |
| 307 | |
| 308 | return insn; |
| 309 | } |
| 310 | |
| 311 | /* We need to keep a list of fixups. We can't simply generate them as |
| 312 | we go, because that would require us to first create the frag, and |
| 313 | that would screw up references to ``.''. */ |
| 314 | |
| 315 | struct arc_fixup |
| 316 | { |
| 317 | /* index into `arc_operands' */ |
| 318 | int opindex; |
| 319 | expressionS exp; |
| 320 | }; |
| 321 | |
| 322 | #define MAX_FIXUPS 5 |
| 323 | |
| 324 | #define MAX_SUFFIXES 5 |
| 325 | |
| 326 | /* Compute the reloc type of an expression. |
| 327 | The possibly modified expression is stored in EXPNEW. |
| 328 | |
| 329 | This is used to convert the expressions generated by the %-op's into |
| 330 | the appropriate operand type. It is called for both data in instructions |
| 331 | (operands) and data outside instructions (variables, debugging info, etc.). |
| 332 | |
| 333 | Currently supported %-ops: |
| 334 | |
| 335 | %st(symbol): represented as "symbol >> 2" |
| 336 | "st" is short for STatus as in the status register (pc) |
| 337 | |
| 338 | DEFAULT_TYPE is the type to use if no special processing is required. |
| 339 | |
| 340 | DATA_P is non-zero for data or limm values, zero for insn operands. |
| 341 | Remember that the opcode "insertion fns" cannot be used on data, they're |
| 342 | only for inserting operands into insns. They also can't be used for limm |
| 343 | values as the insertion routines don't handle limm values. When called for |
| 344 | insns we return fudged reloc types (real_value - BFD_RELOC_UNUSED). When |
| 345 | called for data or limm values we use real reloc types. */ |
| 346 | |
| 347 | static int |
| 348 | get_arc_exp_reloc_type (int data_p, |
| 349 | int default_type, |
| 350 | expressionS *exp, |
| 351 | expressionS *expnew) |
| 352 | { |
| 353 | /* If the expression is "symbol >> 2" we must change it to just "symbol", |
| 354 | as fix_new_exp can't handle it. Similarly for (symbol - symbol) >> 2. |
| 355 | That's ok though. What's really going on here is that we're using |
| 356 | ">> 2" as a special syntax for specifying BFD_RELOC_ARC_B26. */ |
| 357 | |
| 358 | if (exp->X_op == O_right_shift |
| 359 | && exp->X_op_symbol != NULL |
| 360 | && exp->X_op_symbol->sy_value.X_op == O_constant |
| 361 | && exp->X_op_symbol->sy_value.X_add_number == 2 |
| 362 | && exp->X_add_number == 0) |
| 363 | { |
| 364 | if (exp->X_add_symbol != NULL |
| 365 | && (exp->X_add_symbol->sy_value.X_op == O_constant |
| 366 | || exp->X_add_symbol->sy_value.X_op == O_symbol)) |
| 367 | { |
| 368 | *expnew = *exp; |
| 369 | expnew->X_op = O_symbol; |
| 370 | expnew->X_op_symbol = NULL; |
| 371 | return data_p ? BFD_RELOC_ARC_B26 : arc_operand_map['J']; |
| 372 | } |
| 373 | else if (exp->X_add_symbol != NULL |
| 374 | && exp->X_add_symbol->sy_value.X_op == O_subtract) |
| 375 | { |
| 376 | *expnew = exp->X_add_symbol->sy_value; |
| 377 | return data_p ? BFD_RELOC_ARC_B26 : arc_operand_map['J']; |
| 378 | } |
| 379 | } |
| 380 | |
| 381 | *expnew = *exp; |
| 382 | return default_type; |
| 383 | } |
| 384 | \f |
| 385 | static int |
| 386 | arc_set_ext_seg (void) |
| 387 | { |
| 388 | if (!arcext_section) |
| 389 | { |
| 390 | arcext_section = subseg_new (".arcextmap", 0); |
| 391 | bfd_set_section_flags (stdoutput, arcext_section, |
| 392 | SEC_READONLY | SEC_HAS_CONTENTS); |
| 393 | } |
| 394 | else |
| 395 | subseg_set (arcext_section, 0); |
| 396 | return 1; |
| 397 | } |
| 398 | |
| 399 | static void |
| 400 | arc_extoper (int opertype) |
| 401 | { |
| 402 | char *name; |
| 403 | char *mode; |
| 404 | char c; |
| 405 | char *p; |
| 406 | int imode = 0; |
| 407 | int number; |
| 408 | struct arc_ext_operand_value *ext_oper; |
| 409 | symbolS *symbolP; |
| 410 | |
| 411 | segT old_sec; |
| 412 | int old_subsec; |
| 413 | |
| 414 | name = input_line_pointer; |
| 415 | c = get_symbol_end (); |
| 416 | name = xstrdup (name); |
| 417 | |
| 418 | p = name; |
| 419 | while (*p) |
| 420 | { |
| 421 | *p = TOLOWER (*p); |
| 422 | p++; |
| 423 | } |
| 424 | |
| 425 | /* just after name is now '\0' */ |
| 426 | p = input_line_pointer; |
| 427 | *p = c; |
| 428 | SKIP_WHITESPACE (); |
| 429 | |
| 430 | if (*input_line_pointer != ',') |
| 431 | { |
| 432 | as_bad (_("expected comma after operand name")); |
| 433 | ignore_rest_of_line (); |
| 434 | free (name); |
| 435 | return; |
| 436 | } |
| 437 | |
| 438 | input_line_pointer++; /* skip ',' */ |
| 439 | number = get_absolute_expression (); |
| 440 | |
| 441 | if (number < 0) |
| 442 | { |
| 443 | as_bad (_("negative operand number %d"), number); |
| 444 | ignore_rest_of_line (); |
| 445 | free (name); |
| 446 | return; |
| 447 | } |
| 448 | |
| 449 | if (opertype) |
| 450 | { |
| 451 | SKIP_WHITESPACE (); |
| 452 | |
| 453 | if (*input_line_pointer != ',') |
| 454 | { |
| 455 | as_bad (_("expected comma after register-number")); |
| 456 | ignore_rest_of_line (); |
| 457 | free (name); |
| 458 | return; |
| 459 | } |
| 460 | |
| 461 | input_line_pointer++; /* skip ',' */ |
| 462 | mode = input_line_pointer; |
| 463 | |
| 464 | if (!strncmp (mode, "r|w", 3)) |
| 465 | { |
| 466 | imode = 0; |
| 467 | input_line_pointer += 3; |
| 468 | } |
| 469 | else |
| 470 | { |
| 471 | if (!strncmp (mode, "r", 1)) |
| 472 | { |
| 473 | imode = ARC_REGISTER_READONLY; |
| 474 | input_line_pointer += 1; |
| 475 | } |
| 476 | else |
| 477 | { |
| 478 | if (strncmp (mode, "w", 1)) |
| 479 | { |
| 480 | as_bad (_("invalid mode")); |
| 481 | ignore_rest_of_line (); |
| 482 | free (name); |
| 483 | return; |
| 484 | } |
| 485 | else |
| 486 | { |
| 487 | imode = ARC_REGISTER_WRITEONLY; |
| 488 | input_line_pointer += 1; |
| 489 | } |
| 490 | } |
| 491 | } |
| 492 | SKIP_WHITESPACE (); |
| 493 | if (1 == opertype) |
| 494 | { |
| 495 | if (*input_line_pointer != ',') |
| 496 | { |
| 497 | as_bad (_("expected comma after register-mode")); |
| 498 | ignore_rest_of_line (); |
| 499 | free (name); |
| 500 | return; |
| 501 | } |
| 502 | |
| 503 | input_line_pointer++; /* skip ',' */ |
| 504 | |
| 505 | if (!strncmp (input_line_pointer, "cannot_shortcut", 15)) |
| 506 | { |
| 507 | imode |= arc_get_noshortcut_flag (); |
| 508 | input_line_pointer += 15; |
| 509 | } |
| 510 | else |
| 511 | { |
| 512 | if (strncmp (input_line_pointer, "can_shortcut", 12)) |
| 513 | { |
| 514 | as_bad (_("shortcut designator invalid")); |
| 515 | ignore_rest_of_line (); |
| 516 | free (name); |
| 517 | return; |
| 518 | } |
| 519 | else |
| 520 | { |
| 521 | input_line_pointer += 12; |
| 522 | } |
| 523 | } |
| 524 | } |
| 525 | } |
| 526 | |
| 527 | if ((opertype == 1) && number > 60) |
| 528 | { |
| 529 | as_bad (_("core register value (%d) too large"), number); |
| 530 | ignore_rest_of_line (); |
| 531 | free (name); |
| 532 | return; |
| 533 | } |
| 534 | |
| 535 | if ((opertype == 0) && number > 31) |
| 536 | { |
| 537 | as_bad (_("condition code value (%d) too large"), number); |
| 538 | ignore_rest_of_line (); |
| 539 | free (name); |
| 540 | return; |
| 541 | } |
| 542 | |
| 543 | ext_oper = (struct arc_ext_operand_value *) |
| 544 | xmalloc (sizeof (struct arc_ext_operand_value)); |
| 545 | |
| 546 | if (opertype) |
| 547 | { |
| 548 | /* If the symbol already exists, point it at the new definition. */ |
| 549 | if ((symbolP = symbol_find (name))) |
| 550 | { |
| 551 | if (S_GET_SEGMENT (symbolP) == reg_section) |
| 552 | S_SET_VALUE (symbolP, (valueT) &ext_oper->operand); |
| 553 | else |
| 554 | { |
| 555 | as_bad (_("attempt to override symbol: %s"), name); |
| 556 | ignore_rest_of_line (); |
| 557 | free (name); |
| 558 | free (ext_oper); |
| 559 | return; |
| 560 | } |
| 561 | } |
| 562 | else |
| 563 | { |
| 564 | /* If its not there, add it. */ |
| 565 | symbol_table_insert (symbol_create (name, reg_section, |
| 566 | (valueT) &ext_oper->operand, |
| 567 | &zero_address_frag)); |
| 568 | } |
| 569 | } |
| 570 | |
| 571 | ext_oper->operand.name = name; |
| 572 | ext_oper->operand.value = number; |
| 573 | ext_oper->operand.type = arc_operand_type (opertype); |
| 574 | ext_oper->operand.flags = imode; |
| 575 | |
| 576 | ext_oper->next = arc_ext_operands; |
| 577 | arc_ext_operands = ext_oper; |
| 578 | |
| 579 | /* OK, now that we know what this operand is, put a description in |
| 580 | the arc extension section of the output file. */ |
| 581 | |
| 582 | old_sec = now_seg; |
| 583 | old_subsec = now_subseg; |
| 584 | |
| 585 | arc_set_ext_seg (); |
| 586 | |
| 587 | switch (opertype) |
| 588 | { |
| 589 | case 0: |
| 590 | p = frag_more (1); |
| 591 | *p = 3 + strlen (name) + 1; |
| 592 | p = frag_more (1); |
| 593 | *p = EXT_COND_CODE; |
| 594 | p = frag_more (1); |
| 595 | *p = number; |
| 596 | p = frag_more (strlen (name) + 1); |
| 597 | strcpy (p, name); |
| 598 | break; |
| 599 | case 1: |
| 600 | p = frag_more (1); |
| 601 | *p = 3 + strlen (name) + 1; |
| 602 | p = frag_more (1); |
| 603 | *p = EXT_CORE_REGISTER; |
| 604 | p = frag_more (1); |
| 605 | *p = number; |
| 606 | p = frag_more (strlen (name) + 1); |
| 607 | strcpy (p, name); |
| 608 | break; |
| 609 | case 2: |
| 610 | p = frag_more (1); |
| 611 | *p = 6 + strlen (name) + 1; |
| 612 | p = frag_more (1); |
| 613 | *p = EXT_AUX_REGISTER; |
| 614 | p = frag_more (1); |
| 615 | *p = number >> 24 & 0xff; |
| 616 | p = frag_more (1); |
| 617 | *p = number >> 16 & 0xff; |
| 618 | p = frag_more (1); |
| 619 | *p = number >> 8 & 0xff; |
| 620 | p = frag_more (1); |
| 621 | *p = number & 0xff; |
| 622 | p = frag_more (strlen (name) + 1); |
| 623 | strcpy (p, name); |
| 624 | break; |
| 625 | default: |
| 626 | as_bad (_("invalid opertype")); |
| 627 | ignore_rest_of_line (); |
| 628 | free (name); |
| 629 | return; |
| 630 | break; |
| 631 | } |
| 632 | |
| 633 | subseg_set (old_sec, old_subsec); |
| 634 | |
| 635 | /* Enter all registers into the symbol table. */ |
| 636 | |
| 637 | demand_empty_rest_of_line (); |
| 638 | } |
| 639 | |
| 640 | static void |
| 641 | arc_extinst (int ignore ATTRIBUTE_UNUSED) |
| 642 | { |
| 643 | char syntax[129]; |
| 644 | char *name; |
| 645 | char *p; |
| 646 | char c; |
| 647 | int suffixcode = -1; |
| 648 | int opcode, subopcode; |
| 649 | int i; |
| 650 | int s_class = 0; |
| 651 | int name_len; |
| 652 | struct arc_opcode *ext_op; |
| 653 | |
| 654 | segT old_sec; |
| 655 | int old_subsec; |
| 656 | |
| 657 | name = input_line_pointer; |
| 658 | c = get_symbol_end (); |
| 659 | name = xstrdup (name); |
| 660 | strcpy (syntax, name); |
| 661 | name_len = strlen (name); |
| 662 | |
| 663 | /* just after name is now '\0' */ |
| 664 | p = input_line_pointer; |
| 665 | *p = c; |
| 666 | |
| 667 | SKIP_WHITESPACE (); |
| 668 | |
| 669 | if (*input_line_pointer != ',') |
| 670 | { |
| 671 | as_bad (_("expected comma after operand name")); |
| 672 | ignore_rest_of_line (); |
| 673 | return; |
| 674 | } |
| 675 | |
| 676 | input_line_pointer++; /* skip ',' */ |
| 677 | opcode = get_absolute_expression (); |
| 678 | |
| 679 | SKIP_WHITESPACE (); |
| 680 | |
| 681 | if (*input_line_pointer != ',') |
| 682 | { |
| 683 | as_bad (_("expected comma after opcode")); |
| 684 | ignore_rest_of_line (); |
| 685 | return; |
| 686 | } |
| 687 | |
| 688 | input_line_pointer++; /* skip ',' */ |
| 689 | subopcode = get_absolute_expression (); |
| 690 | |
| 691 | if (subopcode < 0) |
| 692 | { |
| 693 | as_bad (_("negative subopcode %d"), subopcode); |
| 694 | ignore_rest_of_line (); |
| 695 | return; |
| 696 | } |
| 697 | |
| 698 | if (subopcode) |
| 699 | { |
| 700 | if (3 != opcode) |
| 701 | { |
| 702 | as_bad (_("subcode value found when opcode not equal 0x03")); |
| 703 | ignore_rest_of_line (); |
| 704 | return; |
| 705 | } |
| 706 | else |
| 707 | { |
| 708 | if (subopcode < 0x09 || subopcode == 0x3f) |
| 709 | { |
| 710 | as_bad (_("invalid subopcode %d"), subopcode); |
| 711 | ignore_rest_of_line (); |
| 712 | return; |
| 713 | } |
| 714 | } |
| 715 | } |
| 716 | |
| 717 | SKIP_WHITESPACE (); |
| 718 | |
| 719 | if (*input_line_pointer != ',') |
| 720 | { |
| 721 | as_bad (_("expected comma after subopcode")); |
| 722 | ignore_rest_of_line (); |
| 723 | return; |
| 724 | } |
| 725 | |
| 726 | input_line_pointer++; /* skip ',' */ |
| 727 | |
| 728 | for (i = 0; i < (int) MAXSUFFIXCLASS; i++) |
| 729 | { |
| 730 | if (!strncmp (suffixclass[i].name,input_line_pointer, suffixclass[i].len)) |
| 731 | { |
| 732 | suffixcode = i; |
| 733 | input_line_pointer += suffixclass[i].len; |
| 734 | break; |
| 735 | } |
| 736 | } |
| 737 | |
| 738 | if (-1 == suffixcode) |
| 739 | { |
| 740 | as_bad (_("invalid suffix class")); |
| 741 | ignore_rest_of_line (); |
| 742 | return; |
| 743 | } |
| 744 | |
| 745 | SKIP_WHITESPACE (); |
| 746 | |
| 747 | if (*input_line_pointer != ',') |
| 748 | { |
| 749 | as_bad (_("expected comma after suffix class")); |
| 750 | ignore_rest_of_line (); |
| 751 | return; |
| 752 | } |
| 753 | |
| 754 | input_line_pointer++; /* skip ',' */ |
| 755 | |
| 756 | for (i = 0; i < (int) MAXSYNTAXCLASS; i++) |
| 757 | { |
| 758 | if (!strncmp (syntaxclass[i].name,input_line_pointer, syntaxclass[i].len)) |
| 759 | { |
| 760 | s_class = syntaxclass[i].s_class; |
| 761 | input_line_pointer += syntaxclass[i].len; |
| 762 | break; |
| 763 | } |
| 764 | } |
| 765 | |
| 766 | if (0 == (SYNTAX_VALID & s_class)) |
| 767 | { |
| 768 | as_bad (_("invalid syntax class")); |
| 769 | ignore_rest_of_line (); |
| 770 | return; |
| 771 | } |
| 772 | |
| 773 | if ((0x3 == opcode) & (s_class & SYNTAX_3OP)) |
| 774 | { |
| 775 | as_bad (_("opcode 0x3 and SYNTAX_3OP invalid")); |
| 776 | ignore_rest_of_line (); |
| 777 | return; |
| 778 | } |
| 779 | |
| 780 | switch (suffixcode) |
| 781 | { |
| 782 | case 0: |
| 783 | strcat (syntax, "%.q%.f "); |
| 784 | break; |
| 785 | case 1: |
| 786 | strcat (syntax, "%.f "); |
| 787 | break; |
| 788 | case 2: |
| 789 | strcat (syntax, "%.q "); |
| 790 | break; |
| 791 | case 3: |
| 792 | strcat (syntax, " "); |
| 793 | break; |
| 794 | default: |
| 795 | as_bad (_("unknown suffix class")); |
| 796 | ignore_rest_of_line (); |
| 797 | return; |
| 798 | break; |
| 799 | }; |
| 800 | |
| 801 | strcat (syntax, ((opcode == 0x3) ? "%a,%b" : ((s_class & SYNTAX_3OP) ? "%a,%b,%c" : "%b,%c"))); |
| 802 | if (suffixcode < 2) |
| 803 | strcat (syntax, "%F"); |
| 804 | strcat (syntax, "%S%L"); |
| 805 | |
| 806 | ext_op = (struct arc_opcode *) xmalloc (sizeof (struct arc_opcode)); |
| 807 | ext_op->syntax = xstrdup (syntax); |
| 808 | |
| 809 | ext_op->mask = I (-1) | ((0x3 == opcode) ? C (-1) : 0); |
| 810 | ext_op->value = I (opcode) | ((0x3 == opcode) ? C (subopcode) : 0); |
| 811 | ext_op->flags = s_class; |
| 812 | ext_op->next_asm = arc_ext_opcodes; |
| 813 | ext_op->next_dis = arc_ext_opcodes; |
| 814 | arc_ext_opcodes = ext_op; |
| 815 | |
| 816 | /* OK, now that we know what this inst is, put a description in the |
| 817 | arc extension section of the output file. */ |
| 818 | |
| 819 | old_sec = now_seg; |
| 820 | old_subsec = now_subseg; |
| 821 | |
| 822 | arc_set_ext_seg (); |
| 823 | |
| 824 | p = frag_more (1); |
| 825 | *p = 5 + name_len + 1; |
| 826 | p = frag_more (1); |
| 827 | *p = EXT_INSTRUCTION; |
| 828 | p = frag_more (1); |
| 829 | *p = opcode; |
| 830 | p = frag_more (1); |
| 831 | *p = subopcode; |
| 832 | p = frag_more (1); |
| 833 | *p = (s_class & (OP1_MUST_BE_IMM | OP1_IMM_IMPLIED) ? IGNORE_FIRST_OPD : 0); |
| 834 | p = frag_more (name_len); |
| 835 | strncpy (p, syntax, name_len); |
| 836 | p = frag_more (1); |
| 837 | *p = '\0'; |
| 838 | |
| 839 | subseg_set (old_sec, old_subsec); |
| 840 | |
| 841 | demand_empty_rest_of_line (); |
| 842 | } |
| 843 | |
| 844 | static void |
| 845 | arc_common (int localScope) |
| 846 | { |
| 847 | char *name; |
| 848 | char c; |
| 849 | char *p; |
| 850 | int align, size; |
| 851 | symbolS *symbolP; |
| 852 | |
| 853 | name = input_line_pointer; |
| 854 | c = get_symbol_end (); |
| 855 | /* just after name is now '\0' */ |
| 856 | p = input_line_pointer; |
| 857 | *p = c; |
| 858 | SKIP_WHITESPACE (); |
| 859 | |
| 860 | if (*input_line_pointer != ',') |
| 861 | { |
| 862 | as_bad (_("expected comma after symbol name")); |
| 863 | ignore_rest_of_line (); |
| 864 | return; |
| 865 | } |
| 866 | |
| 867 | input_line_pointer++; /* skip ',' */ |
| 868 | size = get_absolute_expression (); |
| 869 | |
| 870 | if (size < 0) |
| 871 | { |
| 872 | as_bad (_("negative symbol length")); |
| 873 | ignore_rest_of_line (); |
| 874 | return; |
| 875 | } |
| 876 | |
| 877 | *p = 0; |
| 878 | symbolP = symbol_find_or_make (name); |
| 879 | *p = c; |
| 880 | |
| 881 | if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP)) |
| 882 | { |
| 883 | as_bad (_("ignoring attempt to re-define symbol")); |
| 884 | ignore_rest_of_line (); |
| 885 | return; |
| 886 | } |
| 887 | if (((int) S_GET_VALUE (symbolP) != 0) \ |
| 888 | && ((int) S_GET_VALUE (symbolP) != size)) |
| 889 | { |
| 890 | as_warn (_("length of symbol \"%s\" already %ld, ignoring %d"), |
| 891 | S_GET_NAME (symbolP), (long) S_GET_VALUE (symbolP), size); |
| 892 | } |
| 893 | gas_assert (symbolP->sy_frag == &zero_address_frag); |
| 894 | |
| 895 | /* Now parse the alignment field. This field is optional for |
| 896 | local and global symbols. Default alignment is zero. */ |
| 897 | if (*input_line_pointer == ',') |
| 898 | { |
| 899 | input_line_pointer++; |
| 900 | align = get_absolute_expression (); |
| 901 | if (align < 0) |
| 902 | { |
| 903 | align = 0; |
| 904 | as_warn (_("assuming symbol alignment of zero")); |
| 905 | } |
| 906 | } |
| 907 | else |
| 908 | align = 0; |
| 909 | |
| 910 | if (localScope != 0) |
| 911 | { |
| 912 | segT old_sec; |
| 913 | int old_subsec; |
| 914 | char *pfrag; |
| 915 | |
| 916 | old_sec = now_seg; |
| 917 | old_subsec = now_subseg; |
| 918 | record_alignment (bss_section, align); |
| 919 | subseg_set (bss_section, 0); /* ??? subseg_set (bss_section, 1); ??? */ |
| 920 | |
| 921 | if (align) |
| 922 | /* Do alignment. */ |
| 923 | frag_align (align, 0, 0); |
| 924 | |
| 925 | /* Detach from old frag. */ |
| 926 | if (S_GET_SEGMENT (symbolP) == bss_section) |
| 927 | symbolP->sy_frag->fr_symbol = NULL; |
| 928 | |
| 929 | symbolP->sy_frag = frag_now; |
| 930 | pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, |
| 931 | (offsetT) size, (char *) 0); |
| 932 | *pfrag = 0; |
| 933 | |
| 934 | S_SET_SIZE (symbolP, size); |
| 935 | S_SET_SEGMENT (symbolP, bss_section); |
| 936 | S_CLEAR_EXTERNAL (symbolP); |
| 937 | symbol_get_obj (symbolP)->local = 1; |
| 938 | subseg_set (old_sec, old_subsec); |
| 939 | } |
| 940 | else |
| 941 | { |
| 942 | S_SET_VALUE (symbolP, (valueT) size); |
| 943 | S_SET_ALIGN (symbolP, align); |
| 944 | S_SET_EXTERNAL (symbolP); |
| 945 | S_SET_SEGMENT (symbolP, bfd_com_section_ptr); |
| 946 | } |
| 947 | |
| 948 | symbolP->bsym->flags |= BSF_OBJECT; |
| 949 | |
| 950 | demand_empty_rest_of_line (); |
| 951 | } |
| 952 | \f |
| 953 | /* Select the cpu we're assembling for. */ |
| 954 | |
| 955 | static void |
| 956 | arc_option (int ignore ATTRIBUTE_UNUSED) |
| 957 | { |
| 958 | extern int arc_get_mach (char *); |
| 959 | int mach; |
| 960 | char c; |
| 961 | char *cpu; |
| 962 | |
| 963 | cpu = input_line_pointer; |
| 964 | c = get_symbol_end (); |
| 965 | mach = arc_get_mach (cpu); |
| 966 | *input_line_pointer = c; |
| 967 | |
| 968 | /* If an instruction has already been seen, it's too late. */ |
| 969 | if (cpu_tables_init_p) |
| 970 | { |
| 971 | as_bad (_("\".option\" directive must appear before any instructions")); |
| 972 | ignore_rest_of_line (); |
| 973 | return; |
| 974 | } |
| 975 | |
| 976 | if (mach == -1) |
| 977 | goto bad_cpu; |
| 978 | |
| 979 | if (mach_type_specified_p && mach != arc_mach_type) |
| 980 | { |
| 981 | as_bad (_("\".option\" directive conflicts with initial definition")); |
| 982 | ignore_rest_of_line (); |
| 983 | return; |
| 984 | } |
| 985 | else |
| 986 | { |
| 987 | /* The cpu may have been selected on the command line. */ |
| 988 | if (mach != arc_mach_type) |
| 989 | as_warn (_("\".option\" directive overrides command-line (default) value")); |
| 990 | arc_mach_type = mach; |
| 991 | if (!bfd_set_arch_mach (stdoutput, bfd_arch_arc, mach)) |
| 992 | as_fatal (_("could not set architecture and machine")); |
| 993 | mach_type_specified_p = 1; |
| 994 | } |
| 995 | demand_empty_rest_of_line (); |
| 996 | return; |
| 997 | |
| 998 | bad_cpu: |
| 999 | as_bad (_("invalid identifier for \".option\"")); |
| 1000 | ignore_rest_of_line (); |
| 1001 | } |
| 1002 | \f |
| 1003 | char * |
| 1004 | md_atof (int type, char *litP, int *sizeP) |
| 1005 | { |
| 1006 | return ieee_md_atof (type, litP, sizeP, TRUE); |
| 1007 | } |
| 1008 | |
| 1009 | /* Write a value out to the object file, using the appropriate |
| 1010 | endianness. */ |
| 1011 | |
| 1012 | void |
| 1013 | md_number_to_chars (char *buf, valueT val, int n) |
| 1014 | { |
| 1015 | if (target_big_endian) |
| 1016 | number_to_chars_bigendian (buf, val, n); |
| 1017 | else |
| 1018 | number_to_chars_littleendian (buf, val, n); |
| 1019 | } |
| 1020 | |
| 1021 | /* Round up a section size to the appropriate boundary. */ |
| 1022 | |
| 1023 | valueT |
| 1024 | md_section_align (segT segment, valueT size) |
| 1025 | { |
| 1026 | int align = bfd_get_section_alignment (stdoutput, segment); |
| 1027 | |
| 1028 | return ((size + (1 << align) - 1) & (-1 << align)); |
| 1029 | } |
| 1030 | |
| 1031 | /* We don't have any form of relaxing. */ |
| 1032 | |
| 1033 | int |
| 1034 | md_estimate_size_before_relax (fragS *fragp ATTRIBUTE_UNUSED, |
| 1035 | asection *seg ATTRIBUTE_UNUSED) |
| 1036 | { |
| 1037 | as_fatal (_("relaxation not supported\n")); |
| 1038 | return 1; |
| 1039 | } |
| 1040 | |
| 1041 | /* Convert a machine dependent frag. We never generate these. */ |
| 1042 | |
| 1043 | void |
| 1044 | md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, |
| 1045 | asection *sec ATTRIBUTE_UNUSED, |
| 1046 | fragS *fragp ATTRIBUTE_UNUSED) |
| 1047 | { |
| 1048 | abort (); |
| 1049 | } |
| 1050 | |
| 1051 | static void |
| 1052 | arc_code_symbol (expressionS *expressionP) |
| 1053 | { |
| 1054 | if (expressionP->X_op == O_symbol && expressionP->X_add_number == 0) |
| 1055 | { |
| 1056 | expressionS two; |
| 1057 | |
| 1058 | expressionP->X_op = O_right_shift; |
| 1059 | expressionP->X_add_symbol->sy_value.X_op = O_constant; |
| 1060 | two.X_op = O_constant; |
| 1061 | two.X_add_symbol = two.X_op_symbol = NULL; |
| 1062 | two.X_add_number = 2; |
| 1063 | expressionP->X_op_symbol = make_expr_symbol (&two); |
| 1064 | } |
| 1065 | /* Allow %st(sym1-sym2) */ |
| 1066 | else if (expressionP->X_op == O_subtract |
| 1067 | && expressionP->X_add_symbol != NULL |
| 1068 | && expressionP->X_op_symbol != NULL |
| 1069 | && expressionP->X_add_number == 0) |
| 1070 | { |
| 1071 | expressionS two; |
| 1072 | |
| 1073 | expressionP->X_add_symbol = make_expr_symbol (expressionP); |
| 1074 | expressionP->X_op = O_right_shift; |
| 1075 | two.X_op = O_constant; |
| 1076 | two.X_add_symbol = two.X_op_symbol = NULL; |
| 1077 | two.X_add_number = 2; |
| 1078 | expressionP->X_op_symbol = make_expr_symbol (&two); |
| 1079 | } |
| 1080 | else |
| 1081 | as_bad (_("expression too complex code symbol")); |
| 1082 | } |
| 1083 | |
| 1084 | /* Parse an operand that is machine-specific. |
| 1085 | |
| 1086 | The ARC has a special %-op to adjust addresses so they're usable in |
| 1087 | branches. The "st" is short for the STatus register. |
| 1088 | ??? Later expand this to take a flags value too. |
| 1089 | |
| 1090 | ??? We can't create new expression types so we map the %-op's onto the |
| 1091 | existing syntax. This means that the user could use the chosen syntax |
| 1092 | to achieve the same effect. */ |
| 1093 | |
| 1094 | void |
| 1095 | md_operand (expressionS *expressionP) |
| 1096 | { |
| 1097 | char *p = input_line_pointer; |
| 1098 | |
| 1099 | if (*p != '%') |
| 1100 | return; |
| 1101 | |
| 1102 | if (strncmp (p, "%st(", 4) == 0) |
| 1103 | { |
| 1104 | input_line_pointer += 4; |
| 1105 | expression (expressionP); |
| 1106 | if (*input_line_pointer != ')') |
| 1107 | { |
| 1108 | as_bad (_("missing ')' in %%-op")); |
| 1109 | return; |
| 1110 | } |
| 1111 | ++input_line_pointer; |
| 1112 | arc_code_symbol (expressionP); |
| 1113 | } |
| 1114 | else |
| 1115 | { |
| 1116 | /* It could be a register. */ |
| 1117 | int i, l; |
| 1118 | struct arc_ext_operand_value *ext_oper = arc_ext_operands; |
| 1119 | p++; |
| 1120 | |
| 1121 | while (ext_oper) |
| 1122 | { |
| 1123 | l = strlen (ext_oper->operand.name); |
| 1124 | if (!strncmp (p, ext_oper->operand.name, l) && !ISALNUM (*(p + l))) |
| 1125 | { |
| 1126 | input_line_pointer += l + 1; |
| 1127 | expressionP->X_op = O_register; |
| 1128 | expressionP->X_add_number = (offsetT) &ext_oper->operand; |
| 1129 | return; |
| 1130 | } |
| 1131 | ext_oper = ext_oper->next; |
| 1132 | } |
| 1133 | for (i = 0; i < arc_reg_names_count; i++) |
| 1134 | { |
| 1135 | l = strlen (arc_reg_names[i].name); |
| 1136 | if (!strncmp (p, arc_reg_names[i].name, l) && !ISALNUM (*(p + l))) |
| 1137 | { |
| 1138 | input_line_pointer += l + 1; |
| 1139 | expressionP->X_op = O_register; |
| 1140 | expressionP->X_add_number = (offsetT) &arc_reg_names[i]; |
| 1141 | break; |
| 1142 | } |
| 1143 | } |
| 1144 | } |
| 1145 | } |
| 1146 | |
| 1147 | /* We have no need to default values of symbols. |
| 1148 | We could catch register names here, but that is handled by inserting |
| 1149 | them all in the symbol table to begin with. */ |
| 1150 | |
| 1151 | symbolS * |
| 1152 | md_undefined_symbol (char *name ATTRIBUTE_UNUSED) |
| 1153 | { |
| 1154 | return 0; |
| 1155 | } |
| 1156 | \f |
| 1157 | /* Functions concerning expressions. */ |
| 1158 | |
| 1159 | /* Parse a .byte, .word, etc. expression. |
| 1160 | |
| 1161 | Values for the status register are specified with %st(label). |
| 1162 | `label' will be right shifted by 2. */ |
| 1163 | |
| 1164 | void |
| 1165 | arc_parse_cons_expression (expressionS *exp, |
| 1166 | unsigned int nbytes ATTRIBUTE_UNUSED) |
| 1167 | { |
| 1168 | char *p = input_line_pointer; |
| 1169 | int code_symbol_fix = 0; |
| 1170 | |
| 1171 | for (; ! is_end_of_line[(unsigned char) *p]; p++) |
| 1172 | if (*p == '@' && !strncmp (p, "@h30", 4)) |
| 1173 | { |
| 1174 | code_symbol_fix = 1; |
| 1175 | strcpy (p, "; "); |
| 1176 | } |
| 1177 | expression_and_evaluate (exp); |
| 1178 | if (code_symbol_fix) |
| 1179 | { |
| 1180 | arc_code_symbol (exp); |
| 1181 | input_line_pointer = p; |
| 1182 | } |
| 1183 | } |
| 1184 | |
| 1185 | /* Record a fixup for a cons expression. */ |
| 1186 | |
| 1187 | void |
| 1188 | arc_cons_fix_new (fragS *frag, |
| 1189 | int where, |
| 1190 | int nbytes, |
| 1191 | expressionS *exp) |
| 1192 | { |
| 1193 | if (nbytes == 4) |
| 1194 | { |
| 1195 | int reloc_type; |
| 1196 | expressionS exptmp; |
| 1197 | |
| 1198 | /* This may be a special ARC reloc (eg: %st()). */ |
| 1199 | reloc_type = get_arc_exp_reloc_type (1, BFD_RELOC_32, exp, &exptmp); |
| 1200 | fix_new_exp (frag, where, nbytes, &exptmp, 0, |
| 1201 | (enum bfd_reloc_code_real) reloc_type); |
| 1202 | } |
| 1203 | else |
| 1204 | { |
| 1205 | fix_new_exp (frag, where, nbytes, exp, 0, |
| 1206 | nbytes == 2 ? BFD_RELOC_16 |
| 1207 | : nbytes == 8 ? BFD_RELOC_64 |
| 1208 | : BFD_RELOC_32); |
| 1209 | } |
| 1210 | } |
| 1211 | \f |
| 1212 | /* Functions concerning relocs. */ |
| 1213 | |
| 1214 | /* The location from which a PC relative jump should be calculated, |
| 1215 | given a PC relative reloc. */ |
| 1216 | |
| 1217 | long |
| 1218 | md_pcrel_from (fixS *fixP) |
| 1219 | { |
| 1220 | /* Return the address of the delay slot. */ |
| 1221 | return fixP->fx_frag->fr_address + fixP->fx_where + fixP->fx_size; |
| 1222 | } |
| 1223 | |
| 1224 | /* Apply a fixup to the object code. This is called for all the |
| 1225 | fixups we generated by the call to fix_new_exp, above. In the call |
| 1226 | above we used a reloc code which was the largest legal reloc code |
| 1227 | plus the operand index. Here we undo that to recover the operand |
| 1228 | index. At this point all symbol values should be fully resolved, |
| 1229 | and we attempt to completely resolve the reloc. If we can not do |
| 1230 | that, we determine the correct reloc code and put it back in the fixup. */ |
| 1231 | |
| 1232 | void |
| 1233 | md_apply_fix (fixS *fixP, valueT * valP, segT seg) |
| 1234 | { |
| 1235 | valueT value = * valP; |
| 1236 | |
| 1237 | if (fixP->fx_addsy == (symbolS *) NULL) |
| 1238 | fixP->fx_done = 1; |
| 1239 | |
| 1240 | else if (fixP->fx_pcrel) |
| 1241 | { |
| 1242 | /* Hack around bfd_install_relocation brain damage. */ |
| 1243 | if (S_GET_SEGMENT (fixP->fx_addsy) != seg) |
| 1244 | value += md_pcrel_from (fixP); |
| 1245 | } |
| 1246 | |
| 1247 | /* We can't actually support subtracting a symbol. */ |
| 1248 | if (fixP->fx_subsy != NULL) |
| 1249 | as_bad_where (fixP->fx_file, fixP->fx_line, _("expression too complex")); |
| 1250 | |
| 1251 | if ((int) fixP->fx_r_type >= (int) BFD_RELOC_UNUSED) |
| 1252 | { |
| 1253 | int opindex; |
| 1254 | const struct arc_operand *operand; |
| 1255 | char *where; |
| 1256 | arc_insn insn; |
| 1257 | |
| 1258 | opindex = (int) fixP->fx_r_type - (int) BFD_RELOC_UNUSED; |
| 1259 | |
| 1260 | operand = &arc_operands[opindex]; |
| 1261 | |
| 1262 | /* Fetch the instruction, insert the fully resolved operand |
| 1263 | value, and stuff the instruction back again. */ |
| 1264 | where = fixP->fx_frag->fr_literal + fixP->fx_where; |
| 1265 | if (target_big_endian) |
| 1266 | insn = bfd_getb32 ((unsigned char *) where); |
| 1267 | else |
| 1268 | insn = bfd_getl32 ((unsigned char *) where); |
| 1269 | insn = arc_insert_operand (insn, operand, -1, NULL, (offsetT) value, |
| 1270 | fixP->fx_file, fixP->fx_line); |
| 1271 | if (target_big_endian) |
| 1272 | bfd_putb32 ((bfd_vma) insn, (unsigned char *) where); |
| 1273 | else |
| 1274 | bfd_putl32 ((bfd_vma) insn, (unsigned char *) where); |
| 1275 | |
| 1276 | if (fixP->fx_done) |
| 1277 | /* Nothing else to do here. */ |
| 1278 | return; |
| 1279 | |
| 1280 | /* Determine a BFD reloc value based on the operand information. |
| 1281 | We are only prepared to turn a few of the operands into relocs. |
| 1282 | !!! Note that we can't handle limm values here. Since we're using |
| 1283 | implicit addends the addend must be inserted into the instruction, |
| 1284 | however, the opcode insertion routines currently do nothing with |
| 1285 | limm values. */ |
| 1286 | if (operand->fmt == 'B') |
| 1287 | { |
| 1288 | gas_assert ((operand->flags & ARC_OPERAND_RELATIVE_BRANCH) != 0 |
| 1289 | && operand->bits == 20 |
| 1290 | && operand->shift == 7); |
| 1291 | fixP->fx_r_type = BFD_RELOC_ARC_B22_PCREL; |
| 1292 | } |
| 1293 | else if (operand->fmt == 'J') |
| 1294 | { |
| 1295 | gas_assert ((operand->flags & ARC_OPERAND_ABSOLUTE_BRANCH) != 0 |
| 1296 | && operand->bits == 24 |
| 1297 | && operand->shift == 32); |
| 1298 | fixP->fx_r_type = BFD_RELOC_ARC_B26; |
| 1299 | } |
| 1300 | else if (operand->fmt == 'L') |
| 1301 | { |
| 1302 | gas_assert ((operand->flags & ARC_OPERAND_LIMM) != 0 |
| 1303 | && operand->bits == 32 |
| 1304 | && operand->shift == 32); |
| 1305 | fixP->fx_r_type = BFD_RELOC_32; |
| 1306 | } |
| 1307 | else |
| 1308 | { |
| 1309 | as_bad_where (fixP->fx_file, fixP->fx_line, |
| 1310 | _("unresolved expression that must be resolved")); |
| 1311 | fixP->fx_done = 1; |
| 1312 | return; |
| 1313 | } |
| 1314 | } |
| 1315 | else |
| 1316 | { |
| 1317 | switch (fixP->fx_r_type) |
| 1318 | { |
| 1319 | case BFD_RELOC_8: |
| 1320 | md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, |
| 1321 | value, 1); |
| 1322 | break; |
| 1323 | case BFD_RELOC_16: |
| 1324 | md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, |
| 1325 | value, 2); |
| 1326 | break; |
| 1327 | case BFD_RELOC_32: |
| 1328 | md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, |
| 1329 | value, 4); |
| 1330 | break; |
| 1331 | case BFD_RELOC_ARC_B26: |
| 1332 | /* If !fixP->fx_done then `value' is an implicit addend. |
| 1333 | We must shift it right by 2 in this case as well because the |
| 1334 | linker performs the relocation and then adds this in (as opposed |
| 1335 | to adding this in and then shifting right by 2). */ |
| 1336 | value >>= 2; |
| 1337 | md_number_to_chars (fixP->fx_frag->fr_literal + fixP->fx_where, |
| 1338 | value, 4); |
| 1339 | break; |
| 1340 | default: |
| 1341 | abort (); |
| 1342 | } |
| 1343 | } |
| 1344 | } |
| 1345 | |
| 1346 | /* Translate internal representation of relocation info to BFD target |
| 1347 | format. */ |
| 1348 | |
| 1349 | arelent * |
| 1350 | tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, |
| 1351 | fixS *fixP) |
| 1352 | { |
| 1353 | arelent *reloc; |
| 1354 | |
| 1355 | reloc = (arelent *) xmalloc (sizeof (arelent)); |
| 1356 | reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); |
| 1357 | |
| 1358 | *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixP->fx_addsy); |
| 1359 | reloc->address = fixP->fx_frag->fr_address + fixP->fx_where; |
| 1360 | reloc->howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); |
| 1361 | if (reloc->howto == (reloc_howto_type *) NULL) |
| 1362 | { |
| 1363 | as_bad_where (fixP->fx_file, fixP->fx_line, |
| 1364 | _("internal error: can't export reloc type %d (`%s')"), |
| 1365 | fixP->fx_r_type, |
| 1366 | bfd_get_reloc_code_name (fixP->fx_r_type)); |
| 1367 | return NULL; |
| 1368 | } |
| 1369 | |
| 1370 | gas_assert (!fixP->fx_pcrel == !reloc->howto->pc_relative); |
| 1371 | |
| 1372 | /* Set addend to account for PC being advanced one insn before the |
| 1373 | target address is computed. */ |
| 1374 | |
| 1375 | reloc->addend = (fixP->fx_pcrel ? -4 : 0); |
| 1376 | |
| 1377 | return reloc; |
| 1378 | } |
| 1379 | |
| 1380 | const pseudo_typeS md_pseudo_table[] = |
| 1381 | { |
| 1382 | { "align", s_align_bytes, 0 }, /* Defaulting is invalid (0). */ |
| 1383 | { "comm", arc_common, 0 }, |
| 1384 | { "common", arc_common, 0 }, |
| 1385 | { "lcomm", arc_common, 1 }, |
| 1386 | { "lcommon", arc_common, 1 }, |
| 1387 | { "2byte", cons, 2 }, |
| 1388 | { "half", cons, 2 }, |
| 1389 | { "short", cons, 2 }, |
| 1390 | { "3byte", cons, 3 }, |
| 1391 | { "4byte", cons, 4 }, |
| 1392 | { "word", cons, 4 }, |
| 1393 | { "option", arc_option, 0 }, |
| 1394 | { "cpu", arc_option, 0 }, |
| 1395 | { "block", s_space, 0 }, |
| 1396 | { "extcondcode", arc_extoper, 0 }, |
| 1397 | { "extcoreregister", arc_extoper, 1 }, |
| 1398 | { "extauxregister", arc_extoper, 2 }, |
| 1399 | { "extinstruction", arc_extinst, 0 }, |
| 1400 | { NULL, 0, 0 }, |
| 1401 | }; |
| 1402 | |
| 1403 | /* This routine is called for each instruction to be assembled. */ |
| 1404 | |
| 1405 | void |
| 1406 | md_assemble (char *str) |
| 1407 | { |
| 1408 | const struct arc_opcode *opcode; |
| 1409 | const struct arc_opcode *std_opcode; |
| 1410 | struct arc_opcode *ext_opcode; |
| 1411 | char *start; |
| 1412 | const char *last_errmsg = 0; |
| 1413 | arc_insn insn; |
| 1414 | static int init_tables_p = 0; |
| 1415 | |
| 1416 | /* Opcode table initialization is deferred until here because we have to |
| 1417 | wait for a possible .option command. */ |
| 1418 | if (!init_tables_p) |
| 1419 | { |
| 1420 | init_opcode_tables (arc_mach_type); |
| 1421 | init_tables_p = 1; |
| 1422 | } |
| 1423 | |
| 1424 | /* Skip leading white space. */ |
| 1425 | while (ISSPACE (*str)) |
| 1426 | str++; |
| 1427 | |
| 1428 | /* The instructions are stored in lists hashed by the first letter (though |
| 1429 | we needn't care how they're hashed). Get the first in the list. */ |
| 1430 | |
| 1431 | ext_opcode = arc_ext_opcodes; |
| 1432 | std_opcode = arc_opcode_lookup_asm (str); |
| 1433 | |
| 1434 | /* Keep looking until we find a match. */ |
| 1435 | start = str; |
| 1436 | for (opcode = (ext_opcode ? ext_opcode : std_opcode); |
| 1437 | opcode != NULL; |
| 1438 | opcode = (ARC_OPCODE_NEXT_ASM (opcode) |
| 1439 | ? ARC_OPCODE_NEXT_ASM (opcode) |
| 1440 | : (ext_opcode ? ext_opcode = NULL, std_opcode : NULL))) |
| 1441 | { |
| 1442 | int past_opcode_p, fc, num_suffixes; |
| 1443 | int fix_up_at = 0; |
| 1444 | char *syn; |
| 1445 | struct arc_fixup fixups[MAX_FIXUPS]; |
| 1446 | /* Used as a sanity check. If we need a limm reloc, make sure we ask |
| 1447 | for an extra 4 bytes from frag_more. */ |
| 1448 | int limm_reloc_p; |
| 1449 | int ext_suffix_p; |
| 1450 | const struct arc_operand_value *insn_suffixes[MAX_SUFFIXES]; |
| 1451 | |
| 1452 | /* Is this opcode supported by the selected cpu? */ |
| 1453 | if (! arc_opcode_supported (opcode)) |
| 1454 | continue; |
| 1455 | |
| 1456 | /* Scan the syntax string. If it doesn't match, try the next one. */ |
| 1457 | arc_opcode_init_insert (); |
| 1458 | insn = opcode->value; |
| 1459 | fc = 0; |
| 1460 | past_opcode_p = 0; |
| 1461 | num_suffixes = 0; |
| 1462 | limm_reloc_p = 0; |
| 1463 | ext_suffix_p = 0; |
| 1464 | |
| 1465 | /* We don't check for (*str != '\0') here because we want to parse |
| 1466 | any trailing fake arguments in the syntax string. */ |
| 1467 | for (str = start, syn = opcode->syntax; *syn != '\0';) |
| 1468 | { |
| 1469 | int mods; |
| 1470 | const struct arc_operand *operand; |
| 1471 | |
| 1472 | /* Non operand chars must match exactly. */ |
| 1473 | if (*syn != '%' || *++syn == '%') |
| 1474 | { |
| 1475 | if (*str == *syn) |
| 1476 | { |
| 1477 | if (*syn == ' ') |
| 1478 | past_opcode_p = 1; |
| 1479 | ++syn; |
| 1480 | ++str; |
| 1481 | } |
| 1482 | else |
| 1483 | break; |
| 1484 | continue; |
| 1485 | } |
| 1486 | |
| 1487 | /* We have an operand. Pick out any modifiers. */ |
| 1488 | mods = 0; |
| 1489 | while (ARC_MOD_P (arc_operands[arc_operand_map[(int) *syn]].flags)) |
| 1490 | { |
| 1491 | mods |= arc_operands[arc_operand_map[(int) *syn]].flags & ARC_MOD_BITS; |
| 1492 | ++syn; |
| 1493 | } |
| 1494 | operand = arc_operands + arc_operand_map[(int) *syn]; |
| 1495 | if (operand->fmt == 0) |
| 1496 | as_fatal (_("unknown syntax format character `%c'"), *syn); |
| 1497 | |
| 1498 | if (operand->flags & ARC_OPERAND_FAKE) |
| 1499 | { |
| 1500 | const char *errmsg = NULL; |
| 1501 | if (operand->insert) |
| 1502 | { |
| 1503 | insn = (*operand->insert) (insn, operand, mods, NULL, 0, &errmsg); |
| 1504 | if (errmsg != (const char *) NULL) |
| 1505 | { |
| 1506 | last_errmsg = errmsg; |
| 1507 | if (operand->flags & ARC_OPERAND_ERROR) |
| 1508 | { |
| 1509 | as_bad ("%s", errmsg); |
| 1510 | return; |
| 1511 | } |
| 1512 | else if (operand->flags & ARC_OPERAND_WARN) |
| 1513 | as_warn ("%s", errmsg); |
| 1514 | break; |
| 1515 | } |
| 1516 | if (limm_reloc_p |
| 1517 | && (operand->flags && operand->flags & ARC_OPERAND_LIMM) |
| 1518 | && (operand->flags & |
| 1519 | (ARC_OPERAND_ABSOLUTE_BRANCH | ARC_OPERAND_ADDRESS))) |
| 1520 | { |
| 1521 | fixups[fix_up_at].opindex = arc_operand_map[operand->fmt]; |
| 1522 | } |
| 1523 | } |
| 1524 | ++syn; |
| 1525 | } |
| 1526 | /* Are we finished with suffixes? */ |
| 1527 | else if (!past_opcode_p) |
| 1528 | { |
| 1529 | int found; |
| 1530 | char c; |
| 1531 | char *s, *t; |
| 1532 | const struct arc_operand_value *suf, *suffix_end; |
| 1533 | const struct arc_operand_value *suffix = NULL; |
| 1534 | |
| 1535 | if (!(operand->flags & ARC_OPERAND_SUFFIX)) |
| 1536 | abort (); |
| 1537 | |
| 1538 | /* If we're at a space in the input string, we want to skip the |
| 1539 | remaining suffixes. There may be some fake ones though, so |
| 1540 | just go on to try the next one. */ |
| 1541 | if (*str == ' ') |
| 1542 | { |
| 1543 | ++syn; |
| 1544 | continue; |
| 1545 | } |
| 1546 | |
| 1547 | s = str; |
| 1548 | if (mods & ARC_MOD_DOT) |
| 1549 | { |
| 1550 | if (*s != '.') |
| 1551 | break; |
| 1552 | ++s; |
| 1553 | } |
| 1554 | else |
| 1555 | { |
| 1556 | /* This can happen in "b.nd foo" and we're currently looking |
| 1557 | for "%q" (ie: a condition code suffix). */ |
| 1558 | if (*s == '.') |
| 1559 | { |
| 1560 | ++syn; |
| 1561 | continue; |
| 1562 | } |
| 1563 | } |
| 1564 | |
| 1565 | /* Pick the suffix out and look it up via the hash table. */ |
| 1566 | for (t = s; *t && ISALNUM (*t); ++t) |
| 1567 | continue; |
| 1568 | c = *t; |
| 1569 | *t = '\0'; |
| 1570 | if ((suf = get_ext_suffix (s))) |
| 1571 | ext_suffix_p = 1; |
| 1572 | else |
| 1573 | suf = (const struct arc_operand_value *) |
| 1574 | hash_find (arc_suffix_hash, s); |
| 1575 | if (!suf) |
| 1576 | { |
| 1577 | /* This can happen in "blle foo" and we're currently using |
| 1578 | the template "b%q%.n %j". The "bl" insn occurs later in |
| 1579 | the table so "lle" isn't an illegal suffix. */ |
| 1580 | *t = c; |
| 1581 | break; |
| 1582 | } |
| 1583 | |
| 1584 | /* Is it the right type? Note that the same character is used |
| 1585 | several times, so we have to examine all of them. This is |
| 1586 | relatively efficient as equivalent entries are kept |
| 1587 | together. If it's not the right type, don't increment `str' |
| 1588 | so we try the next one in the series. */ |
| 1589 | found = 0; |
| 1590 | if (ext_suffix_p && arc_operands[suf->type].fmt == *syn) |
| 1591 | { |
| 1592 | /* Insert the suffix's value into the insn. */ |
| 1593 | *t = c; |
| 1594 | if (operand->insert) |
| 1595 | insn = (*operand->insert) (insn, operand, |
| 1596 | mods, NULL, suf->value, |
| 1597 | NULL); |
| 1598 | else |
| 1599 | insn |= suf->value << operand->shift; |
| 1600 | suffix = suf; |
| 1601 | str = t; |
| 1602 | found = 1; |
| 1603 | } |
| 1604 | else |
| 1605 | { |
| 1606 | *t = c; |
| 1607 | suffix_end = arc_suffixes + arc_suffixes_count; |
| 1608 | for (suffix = suf; |
| 1609 | suffix < suffix_end && strcmp (suffix->name, suf->name) == 0; |
| 1610 | ++suffix) |
| 1611 | { |
| 1612 | if (arc_operands[suffix->type].fmt == *syn) |
| 1613 | { |
| 1614 | /* Insert the suffix's value into the insn. */ |
| 1615 | if (operand->insert) |
| 1616 | insn = (*operand->insert) (insn, operand, |
| 1617 | mods, NULL, suffix->value, |
| 1618 | NULL); |
| 1619 | else |
| 1620 | insn |= suffix->value << operand->shift; |
| 1621 | |
| 1622 | str = t; |
| 1623 | found = 1; |
| 1624 | break; |
| 1625 | } |
| 1626 | } |
| 1627 | } |
| 1628 | ++syn; |
| 1629 | if (!found) |
| 1630 | /* Wrong type. Just go on to try next insn entry. */ |
| 1631 | ; |
| 1632 | else |
| 1633 | { |
| 1634 | if (num_suffixes == MAX_SUFFIXES) |
| 1635 | as_bad (_("too many suffixes")); |
| 1636 | else |
| 1637 | insn_suffixes[num_suffixes++] = suffix; |
| 1638 | } |
| 1639 | } |
| 1640 | else |
| 1641 | /* This is either a register or an expression of some kind. */ |
| 1642 | { |
| 1643 | char *hold; |
| 1644 | const struct arc_operand_value *reg = NULL; |
| 1645 | long value = 0; |
| 1646 | expressionS exp; |
| 1647 | |
| 1648 | if (operand->flags & ARC_OPERAND_SUFFIX) |
| 1649 | abort (); |
| 1650 | |
| 1651 | /* Is there anything left to parse? |
| 1652 | We don't check for this at the top because we want to parse |
| 1653 | any trailing fake arguments in the syntax string. */ |
| 1654 | if (is_end_of_line[(unsigned char) *str]) |
| 1655 | break; |
| 1656 | |
| 1657 | /* Parse the operand. */ |
| 1658 | hold = input_line_pointer; |
| 1659 | input_line_pointer = str; |
| 1660 | expression (&exp); |
| 1661 | str = input_line_pointer; |
| 1662 | input_line_pointer = hold; |
| 1663 | |
| 1664 | if (exp.X_op == O_illegal) |
| 1665 | as_bad (_("illegal operand")); |
| 1666 | else if (exp.X_op == O_absent) |
| 1667 | as_bad (_("missing operand")); |
| 1668 | else if (exp.X_op == O_constant) |
| 1669 | value = exp.X_add_number; |
| 1670 | else if (exp.X_op == O_register) |
| 1671 | reg = (struct arc_operand_value *) exp.X_add_number; |
| 1672 | #define IS_REG_DEST_OPERAND(o) ((o) == 'a') |
| 1673 | else if (IS_REG_DEST_OPERAND (*syn)) |
| 1674 | as_bad (_("symbol as destination register")); |
| 1675 | else |
| 1676 | { |
| 1677 | if (!strncmp (str, "@h30", 4)) |
| 1678 | { |
| 1679 | arc_code_symbol (&exp); |
| 1680 | str += 4; |
| 1681 | } |
| 1682 | /* We need to generate a fixup for this expression. */ |
| 1683 | if (fc >= MAX_FIXUPS) |
| 1684 | as_fatal (_("too many fixups")); |
| 1685 | fixups[fc].exp = exp; |
| 1686 | /* We don't support shimm relocs. break here to force |
| 1687 | the assembler to output a limm. */ |
| 1688 | #define IS_REG_SHIMM_OFFSET(o) ((o) == 'd') |
| 1689 | if (IS_REG_SHIMM_OFFSET (*syn)) |
| 1690 | break; |
| 1691 | /* If this is a register constant (IE: one whose |
| 1692 | register value gets stored as 61-63) then this |
| 1693 | must be a limm. */ |
| 1694 | /* ??? This bit could use some cleaning up. |
| 1695 | Referencing the format chars like this goes |
| 1696 | against style. */ |
| 1697 | if (IS_SYMBOL_OPERAND (*syn)) |
| 1698 | { |
| 1699 | const char *junk; |
| 1700 | limm_reloc_p = 1; |
| 1701 | /* Save this, we don't yet know what reloc to use. */ |
| 1702 | fix_up_at = fc; |
| 1703 | /* Tell insert_reg we need a limm. This is |
| 1704 | needed because the value at this point is |
| 1705 | zero, a shimm. */ |
| 1706 | /* ??? We need a cleaner interface than this. */ |
| 1707 | (*arc_operands[arc_operand_map['Q']].insert) |
| 1708 | (insn, operand, mods, reg, 0L, &junk); |
| 1709 | } |
| 1710 | else |
| 1711 | fixups[fc].opindex = arc_operand_map[(int) *syn]; |
| 1712 | ++fc; |
| 1713 | value = 0; |
| 1714 | } |
| 1715 | |
| 1716 | /* Insert the register or expression into the instruction. */ |
| 1717 | if (operand->insert) |
| 1718 | { |
| 1719 | const char *errmsg = NULL; |
| 1720 | insn = (*operand->insert) (insn, operand, mods, |
| 1721 | reg, (long) value, &errmsg); |
| 1722 | if (errmsg != (const char *) NULL) |
| 1723 | { |
| 1724 | last_errmsg = errmsg; |
| 1725 | if (operand->flags & ARC_OPERAND_ERROR) |
| 1726 | { |
| 1727 | as_bad ("%s", errmsg); |
| 1728 | return; |
| 1729 | } |
| 1730 | else if (operand->flags & ARC_OPERAND_WARN) |
| 1731 | as_warn ("%s", errmsg); |
| 1732 | break; |
| 1733 | } |
| 1734 | } |
| 1735 | else |
| 1736 | insn |= (value & ((1 << operand->bits) - 1)) << operand->shift; |
| 1737 | |
| 1738 | ++syn; |
| 1739 | } |
| 1740 | } |
| 1741 | |
| 1742 | /* If we're at the end of the syntax string, we're done. */ |
| 1743 | /* FIXME: try to move this to a separate function. */ |
| 1744 | if (*syn == '\0') |
| 1745 | { |
| 1746 | int i; |
| 1747 | char *f; |
| 1748 | long limm, limm_p; |
| 1749 | |
| 1750 | /* For the moment we assume a valid `str' can only contain blanks |
| 1751 | now. IE: We needn't try again with a longer version of the |
| 1752 | insn and it is assumed that longer versions of insns appear |
| 1753 | before shorter ones (eg: lsr r2,r3,1 vs lsr r2,r3). */ |
| 1754 | |
| 1755 | while (ISSPACE (*str)) |
| 1756 | ++str; |
| 1757 | |
| 1758 | if (!is_end_of_line[(unsigned char) *str]) |
| 1759 | as_bad (_("junk at end of line: `%s'"), str); |
| 1760 | |
| 1761 | /* Is there a limm value? */ |
| 1762 | limm_p = arc_opcode_limm_p (&limm); |
| 1763 | |
| 1764 | /* Perform various error and warning tests. */ |
| 1765 | |
| 1766 | { |
| 1767 | static int in_delay_slot_p = 0; |
| 1768 | static int prev_insn_needs_cc_nop_p = 0; |
| 1769 | /* delay slot type seen */ |
| 1770 | int delay_slot_type = ARC_DELAY_NONE; |
| 1771 | /* conditional execution flag seen */ |
| 1772 | int conditional = 0; |
| 1773 | /* 1 if condition codes are being set */ |
| 1774 | int cc_set_p = 0; |
| 1775 | /* 1 if conditional branch, including `b' "branch always" */ |
| 1776 | int cond_branch_p = opcode->flags & ARC_OPCODE_COND_BRANCH; |
| 1777 | |
| 1778 | for (i = 0; i < num_suffixes; ++i) |
| 1779 | { |
| 1780 | switch (arc_operands[insn_suffixes[i]->type].fmt) |
| 1781 | { |
| 1782 | case 'n': |
| 1783 | delay_slot_type = insn_suffixes[i]->value; |
| 1784 | break; |
| 1785 | case 'q': |
| 1786 | conditional = insn_suffixes[i]->value; |
| 1787 | break; |
| 1788 | case 'f': |
| 1789 | cc_set_p = 1; |
| 1790 | break; |
| 1791 | } |
| 1792 | } |
| 1793 | |
| 1794 | /* Putting an insn with a limm value in a delay slot is supposed to |
| 1795 | be legal, but let's warn the user anyway. Ditto for 8 byte |
| 1796 | jumps with delay slots. */ |
| 1797 | if (in_delay_slot_p && limm_p) |
| 1798 | as_warn (_("8 byte instruction in delay slot")); |
| 1799 | if (delay_slot_type != ARC_DELAY_NONE |
| 1800 | && limm_p && arc_insn_not_jl (insn)) /* except for jl addr */ |
| 1801 | as_warn (_("8 byte jump instruction with delay slot")); |
| 1802 | in_delay_slot_p = (delay_slot_type != ARC_DELAY_NONE) && !limm_p; |
| 1803 | |
| 1804 | /* Warn when a conditional branch immediately follows a set of |
| 1805 | the condition codes. Note that this needn't be done if the |
| 1806 | insn that sets the condition codes uses a limm. */ |
| 1807 | if (cond_branch_p && conditional != 0 /* 0 = "always" */ |
| 1808 | && prev_insn_needs_cc_nop_p && arc_mach_type == bfd_mach_arc_5) |
| 1809 | as_warn (_("conditional branch follows set of flags")); |
| 1810 | prev_insn_needs_cc_nop_p = |
| 1811 | /* FIXME: ??? not required: |
| 1812 | (delay_slot_type != ARC_DELAY_NONE) && */ |
| 1813 | cc_set_p && !limm_p; |
| 1814 | } |
| 1815 | |
| 1816 | /* Write out the instruction. |
| 1817 | It is important to fetch enough space in one call to `frag_more'. |
| 1818 | We use (f - frag_now->fr_literal) to compute where we are and we |
| 1819 | don't want frag_now to change between calls. */ |
| 1820 | if (limm_p) |
| 1821 | { |
| 1822 | f = frag_more (8); |
| 1823 | md_number_to_chars (f, insn, 4); |
| 1824 | md_number_to_chars (f + 4, limm, 4); |
| 1825 | dwarf2_emit_insn (8); |
| 1826 | } |
| 1827 | else if (limm_reloc_p) |
| 1828 | /* We need a limm reloc, but the tables think we don't. */ |
| 1829 | abort (); |
| 1830 | else |
| 1831 | { |
| 1832 | f = frag_more (4); |
| 1833 | md_number_to_chars (f, insn, 4); |
| 1834 | dwarf2_emit_insn (4); |
| 1835 | } |
| 1836 | |
| 1837 | /* Create any fixups. */ |
| 1838 | for (i = 0; i < fc; ++i) |
| 1839 | { |
| 1840 | int op_type, reloc_type; |
| 1841 | expressionS exptmp; |
| 1842 | const struct arc_operand *operand; |
| 1843 | |
| 1844 | /* Create a fixup for this operand. |
| 1845 | At this point we do not use a bfd_reloc_code_real_type for |
| 1846 | operands residing in the insn, but instead just use the |
| 1847 | operand index. This lets us easily handle fixups for any |
| 1848 | operand type, although that is admittedly not a very exciting |
| 1849 | feature. We pick a BFD reloc type in md_apply_fix. |
| 1850 | |
| 1851 | Limm values (4 byte immediate "constants") must be treated |
| 1852 | normally because they're not part of the actual insn word |
| 1853 | and thus the insertion routines don't handle them. */ |
| 1854 | |
| 1855 | if (arc_operands[fixups[i].opindex].flags & ARC_OPERAND_LIMM) |
| 1856 | { |
| 1857 | /* Modify the fixup addend as required by the cpu. */ |
| 1858 | fixups[i].exp.X_add_number += arc_limm_fixup_adjust (insn); |
| 1859 | op_type = fixups[i].opindex; |
| 1860 | /* FIXME: can we add this data to the operand table? */ |
| 1861 | if (op_type == arc_operand_map['L'] |
| 1862 | || op_type == arc_operand_map['s'] |
| 1863 | || op_type == arc_operand_map['o'] |
| 1864 | || op_type == arc_operand_map['O']) |
| 1865 | reloc_type = BFD_RELOC_32; |
| 1866 | else if (op_type == arc_operand_map['J']) |
| 1867 | reloc_type = BFD_RELOC_ARC_B26; |
| 1868 | else |
| 1869 | abort (); |
| 1870 | reloc_type = get_arc_exp_reloc_type (1, reloc_type, |
| 1871 | &fixups[i].exp, |
| 1872 | &exptmp); |
| 1873 | } |
| 1874 | else |
| 1875 | { |
| 1876 | op_type = get_arc_exp_reloc_type (0, fixups[i].opindex, |
| 1877 | &fixups[i].exp, &exptmp); |
| 1878 | reloc_type = op_type + (int) BFD_RELOC_UNUSED; |
| 1879 | } |
| 1880 | operand = &arc_operands[op_type]; |
| 1881 | fix_new_exp (frag_now, |
| 1882 | ((f - frag_now->fr_literal) |
| 1883 | + (operand->flags & ARC_OPERAND_LIMM ? 4 : 0)), 4, |
| 1884 | &exptmp, |
| 1885 | (operand->flags & ARC_OPERAND_RELATIVE_BRANCH) != 0, |
| 1886 | (bfd_reloc_code_real_type) reloc_type); |
| 1887 | } |
| 1888 | return; |
| 1889 | } |
| 1890 | } |
| 1891 | |
| 1892 | if (NULL == last_errmsg) |
| 1893 | as_bad (_("bad instruction `%s'"), start); |
| 1894 | else |
| 1895 | as_bad ("%s", last_errmsg); |
| 1896 | } |