| 1 | @c Copyright (C) 2011-2017 Free Software Foundation, Inc. |
| 2 | @c This is part of the GAS manual. |
| 3 | @c For copying conditions, see the file as.texinfo. |
| 4 | @ifset GENERIC |
| 5 | @page |
| 6 | @node TILEPro-Dependent |
| 7 | @chapter TILEPro Dependent Features |
| 8 | @end ifset |
| 9 | @ifclear GENERIC |
| 10 | @node Machine Dependencies |
| 11 | @chapter TILEPro Dependent Features |
| 12 | @end ifclear |
| 13 | |
| 14 | @cindex TILEPro support |
| 15 | @menu |
| 16 | * TILEPro Options:: TILEPro Options |
| 17 | * TILEPro Syntax:: TILEPro Syntax |
| 18 | * TILEPro Directives:: TILEPro Directives |
| 19 | @end menu |
| 20 | |
| 21 | @node TILEPro Options |
| 22 | @section Options |
| 23 | |
| 24 | @code{@value{AS}} has no machine-dependent command-line options for |
| 25 | TILEPro. |
| 26 | |
| 27 | @node TILEPro Syntax |
| 28 | @section Syntax |
| 29 | @cindex TILEPro syntax |
| 30 | @cindex syntax, TILEPro |
| 31 | |
| 32 | Block comments are delimited by @samp{/*} and @samp{*/}. End of line |
| 33 | comments may be introduced by @samp{#}. |
| 34 | |
| 35 | Instructions consist of a leading opcode or macro name followed by |
| 36 | whitespace and an optional comma-separated list of operands: |
| 37 | |
| 38 | @smallexample |
| 39 | @var{opcode} [@var{operand}, @dots{}] |
| 40 | @end smallexample |
| 41 | |
| 42 | Instructions must be separated by a newline or semicolon. |
| 43 | |
| 44 | There are two ways to write code: either write naked instructions, |
| 45 | which the assembler is free to combine into VLIW bundles, or specify |
| 46 | the VLIW bundles explicitly. |
| 47 | |
| 48 | Bundles are specified using curly braces: |
| 49 | |
| 50 | @smallexample |
| 51 | @{ @var{add} r3,r4,r5 ; @var{add} r7,r8,r9 ; @var{lw} r10,r11 @} |
| 52 | @end smallexample |
| 53 | |
| 54 | A bundle can span multiple lines. If you want to put multiple |
| 55 | instructions on a line, whether in a bundle or not, you need to |
| 56 | separate them with semicolons as in this example. |
| 57 | |
| 58 | A bundle may contain one or more instructions, up to the limit |
| 59 | specified by the ISA (currently three). If fewer instructions are |
| 60 | specified than the hardware supports in a bundle, the assembler |
| 61 | inserts @code{fnop} instructions automatically. |
| 62 | |
| 63 | The assembler will prefer to preserve the ordering of instructions |
| 64 | within the bundle, putting the first instruction in a lower-numbered |
| 65 | pipeline than the next one, etc. This fact, combined with the |
| 66 | optional use of explicit @code{fnop} or @code{nop} instructions, |
| 67 | allows precise control over which pipeline executes each instruction. |
| 68 | |
| 69 | If the instructions cannot be bundled in the listed order, the |
| 70 | assembler will automatically try to find a valid pipeline |
| 71 | assignment. If there is no way to bundle the instructions together, |
| 72 | the assembler reports an error. |
| 73 | |
| 74 | The assembler does not yet auto-bundle (automatically combine multiple |
| 75 | instructions into one bundle), but it reserves the right to do so in |
| 76 | the future. If you want to force an instruction to run by itself, put |
| 77 | it in a bundle explicitly with curly braces and use @code{nop} |
| 78 | instructions (not @code{fnop}) to fill the remaining pipeline slots in |
| 79 | that bundle. |
| 80 | |
| 81 | @menu |
| 82 | * TILEPro Opcodes:: Opcode Naming Conventions. |
| 83 | * TILEPro Registers:: Register Naming. |
| 84 | * TILEPro Modifiers:: Symbolic Operand Modifiers. |
| 85 | @end menu |
| 86 | |
| 87 | @node TILEPro Opcodes |
| 88 | @subsection Opcode Names |
| 89 | @cindex TILEPro opcode names |
| 90 | @cindex opcode names, TILEPro |
| 91 | |
| 92 | For a complete list of opcodes and descriptions of their semantics, |
| 93 | see @cite{TILE Processor User Architecture Manual}, available upon |
| 94 | request at www.tilera.com. |
| 95 | |
| 96 | @node TILEPro Registers |
| 97 | @subsection Register Names |
| 98 | @cindex TILEPro register names |
| 99 | @cindex register names, TILEPro |
| 100 | |
| 101 | General-purpose registers are represented by predefined symbols of the |
| 102 | form @samp{r@var{N}}, where @var{N} represents a number between |
| 103 | @code{0} and @code{63}. However, the following registers have |
| 104 | canonical names that must be used instead: |
| 105 | |
| 106 | @table @code |
| 107 | @item r54 |
| 108 | sp |
| 109 | |
| 110 | @item r55 |
| 111 | lr |
| 112 | |
| 113 | @item r56 |
| 114 | sn |
| 115 | |
| 116 | @item r57 |
| 117 | idn0 |
| 118 | |
| 119 | @item r58 |
| 120 | idn1 |
| 121 | |
| 122 | @item r59 |
| 123 | udn0 |
| 124 | |
| 125 | @item r60 |
| 126 | udn1 |
| 127 | |
| 128 | @item r61 |
| 129 | udn2 |
| 130 | |
| 131 | @item r62 |
| 132 | udn3 |
| 133 | |
| 134 | @item r63 |
| 135 | zero |
| 136 | |
| 137 | @end table |
| 138 | |
| 139 | The assembler will emit a warning if a numeric name is used instead of |
| 140 | the canonical name. The @code{.no_require_canonical_reg_names} |
| 141 | assembler pseudo-op turns off this |
| 142 | warning. @code{.require_canonical_reg_names} turns it back on. |
| 143 | |
| 144 | @node TILEPro Modifiers |
| 145 | @subsection Symbolic Operand Modifiers |
| 146 | @cindex TILEPro modifiers |
| 147 | @cindex symbol modifiers, TILEPro |
| 148 | |
| 149 | The assembler supports several modifiers when using symbol addresses |
| 150 | in TILEPro instruction operands. The general syntax is the following: |
| 151 | |
| 152 | @smallexample |
| 153 | modifier(symbol) |
| 154 | @end smallexample |
| 155 | |
| 156 | The following modifiers are supported: |
| 157 | |
| 158 | @table @code |
| 159 | |
| 160 | @item lo16 |
| 161 | |
| 162 | This modifier is used to load the low 16 bits of the symbol's address, |
| 163 | sign-extended to a 32-bit value (sign-extension allows it to be |
| 164 | range-checked against signed 16 bit immediate operands without |
| 165 | complaint). |
| 166 | |
| 167 | @item hi16 |
| 168 | |
| 169 | This modifier is used to load the high 16 bits of the symbol's |
| 170 | address, also sign-extended to a 32-bit value. |
| 171 | |
| 172 | @item ha16 |
| 173 | |
| 174 | @code{ha16(N)} is identical to @code{hi16(N)}, except if |
| 175 | @code{lo16(N)} is negative it adds one to the @code{hi16(N)} |
| 176 | value. This way @code{lo16} and @code{ha16} can be added to create any |
| 177 | 32-bit value using @code{auli}. For example, here is how you move an |
| 178 | arbitrary 32-bit address into r3: |
| 179 | |
| 180 | @smallexample |
| 181 | moveli r3, lo16(sym) |
| 182 | auli r3, r3, ha16(sym) |
| 183 | @end smallexample |
| 184 | |
| 185 | @item got |
| 186 | |
| 187 | This modifier is used to load the offset of the GOT entry |
| 188 | corresponding to the symbol. |
| 189 | |
| 190 | @item got_lo16 |
| 191 | |
| 192 | This modifier is used to load the sign-extended low 16 bits of the |
| 193 | offset of the GOT entry corresponding to the symbol. |
| 194 | |
| 195 | @item got_hi16 |
| 196 | |
| 197 | This modifier is used to load the sign-extended high 16 bits of the |
| 198 | offset of the GOT entry corresponding to the symbol. |
| 199 | |
| 200 | @item got_ha16 |
| 201 | |
| 202 | This modifier is like @code{got_hi16}, but it adds one if |
| 203 | @code{got_lo16} of the input value is negative. |
| 204 | |
| 205 | @item plt |
| 206 | |
| 207 | This modifier is used for function symbols. It causes a |
| 208 | @emph{procedure linkage table}, an array of code stubs, to be created |
| 209 | at the time the shared object is created or linked against, together |
| 210 | with a global offset table entry. The value is a pc-relative offset |
| 211 | to the corresponding stub code in the procedure linkage table. This |
| 212 | arrangement causes the run-time symbol resolver to be called to look |
| 213 | up and set the value of the symbol the first time the function is |
| 214 | called (at latest; depending environment variables). It is only safe |
| 215 | to leave the symbol unresolved this way if all references are function |
| 216 | calls. |
| 217 | |
| 218 | @item tls_gd |
| 219 | |
| 220 | This modifier is used to load the offset of the GOT entry of the |
| 221 | symbol's TLS descriptor, to be used for general-dynamic TLS accesses. |
| 222 | |
| 223 | @item tls_gd_lo16 |
| 224 | |
| 225 | This modifier is used to load the sign-extended low 16 bits of the |
| 226 | offset of the GOT entry of the symbol's TLS descriptor, to be used for |
| 227 | general dynamic TLS accesses. |
| 228 | |
| 229 | @item tls_gd_hi16 |
| 230 | |
| 231 | This modifier is used to load the sign-extended high 16 bits of the |
| 232 | offset of the GOT entry of the symbol's TLS descriptor, to be used for |
| 233 | general dynamic TLS accesses. |
| 234 | |
| 235 | @item tls_gd_ha16 |
| 236 | |
| 237 | This modifier is like @code{tls_gd_hi16}, but it adds one to the value |
| 238 | if @code{tls_gd_lo16} of the input value is negative. |
| 239 | |
| 240 | @item tls_ie |
| 241 | |
| 242 | This modifier is used to load the offset of the GOT entry containing |
| 243 | the offset of the symbol's address from the TCB, to be used for |
| 244 | initial-exec TLS accesses. |
| 245 | |
| 246 | @item tls_ie_lo16 |
| 247 | |
| 248 | This modifier is used to load the low 16 bits of the offset of the GOT |
| 249 | entry containing the offset of the symbol's address from the TCB, to |
| 250 | be used for initial-exec TLS accesses. |
| 251 | |
| 252 | @item tls_ie_hi16 |
| 253 | |
| 254 | This modifier is used to load the high 16 bits of the offset of the |
| 255 | GOT entry containing the offset of the symbol's address from the TCB, |
| 256 | to be used for initial-exec TLS accesses. |
| 257 | |
| 258 | @item tls_ie_ha16 |
| 259 | |
| 260 | This modifier is like @code{tls_ie_hi16}, but it adds one to the value |
| 261 | if @code{tls_ie_lo16} of the input value is negative. |
| 262 | |
| 263 | @item tls_le |
| 264 | |
| 265 | This modifier is used to load the offset of the symbol's address from |
| 266 | the TCB, to be used for local-exec TLS accesses. |
| 267 | |
| 268 | @item tls_le_lo16 |
| 269 | |
| 270 | This modifier is used to load the low 16 bits of the offset of the |
| 271 | symbol's address from the TCB, to be used for local-exec TLS accesses. |
| 272 | |
| 273 | @item tls_le_hi16 |
| 274 | |
| 275 | This modifier is used to load the high 16 bits of the offset of the |
| 276 | symbol's address from the TCB, to be used for local-exec TLS accesses. |
| 277 | |
| 278 | @item tls_le_ha16 |
| 279 | |
| 280 | This modifier is like @code{tls_le_hi16}, but it adds one to the value |
| 281 | if @code{tls_le_lo16} of the input value is negative. |
| 282 | |
| 283 | @item tls_gd_call |
| 284 | |
| 285 | This modifier is used to tag an instruction as the ``call'' part of a |
| 286 | calling sequence for a TLS GD reference of its operand. |
| 287 | |
| 288 | @item tls_gd_add |
| 289 | |
| 290 | This modifier is used to tag an instruction as the ``add'' part of a |
| 291 | calling sequence for a TLS GD reference of its operand. |
| 292 | |
| 293 | @item tls_ie_load |
| 294 | |
| 295 | This modifier is used to tag an instruction as the ``load'' part of a |
| 296 | calling sequence for a TLS IE reference of its operand. |
| 297 | |
| 298 | @end table |
| 299 | |
| 300 | @node TILEPro Directives |
| 301 | @section TILEPro Directives |
| 302 | @cindex machine directives, TILEPro |
| 303 | @cindex TILEPro machine directives |
| 304 | |
| 305 | @table @code |
| 306 | |
| 307 | @cindex @code{.align} directive, TILEPro |
| 308 | @item .align @var{expression} [, @var{expression}] |
| 309 | This is the generic @var{.align} directive. The first argument is the |
| 310 | requested alignment in bytes. |
| 311 | |
| 312 | @cindex @code{.allow_suspicious_bundles} directive, TILEPro |
| 313 | @item .allow_suspicious_bundles |
| 314 | Turns on error checking for combinations of instructions in a bundle |
| 315 | that probably indicate a programming error. This is on by default. |
| 316 | |
| 317 | @item .no_allow_suspicious_bundles |
| 318 | Turns off error checking for combinations of instructions in a bundle |
| 319 | that probably indicate a programming error. |
| 320 | |
| 321 | @cindex @code{.require_canonical_reg_names} directive, TILEPro |
| 322 | @item .require_canonical_reg_names |
| 323 | Require that canonical register names be used, and emit a warning if |
| 324 | the numeric names are used. This is on by default. |
| 325 | |
| 326 | @item .no_require_canonical_reg_names |
| 327 | Permit the use of numeric names for registers that have canonical |
| 328 | names. |
| 329 | |
| 330 | @end table |
| 331 | |