| 1 | /* Target-dependent code for the HP PA architecture, for GDB. |
| 2 | Copyright 1986, 1987, 1989-1996, 1999-2000 Free Software Foundation, Inc. |
| 3 | |
| 4 | Contributed by the Center for Software Science at the |
| 5 | University of Utah (pa-gdb-bugs@cs.utah.edu). |
| 6 | |
| 7 | This file is part of GDB. |
| 8 | |
| 9 | This program is free software; you can redistribute it and/or modify |
| 10 | it under the terms of the GNU General Public License as published by |
| 11 | the Free Software Foundation; either version 2 of the License, or |
| 12 | (at your option) any later version. |
| 13 | |
| 14 | This program is distributed in the hope that it will be useful, |
| 15 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 16 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 17 | GNU General Public License for more details. |
| 18 | |
| 19 | You should have received a copy of the GNU General Public License |
| 20 | along with this program; if not, write to the Free Software |
| 21 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 22 | Boston, MA 02111-1307, USA. */ |
| 23 | |
| 24 | #include "defs.h" |
| 25 | #include "frame.h" |
| 26 | #include "bfd.h" |
| 27 | #include "inferior.h" |
| 28 | #include "value.h" |
| 29 | |
| 30 | /* For argument passing to the inferior */ |
| 31 | #include "symtab.h" |
| 32 | |
| 33 | #ifdef USG |
| 34 | #include <sys/types.h> |
| 35 | #endif |
| 36 | |
| 37 | #include <dl.h> |
| 38 | #include <sys/param.h> |
| 39 | #include <signal.h> |
| 40 | |
| 41 | #include <sys/ptrace.h> |
| 42 | #include <machine/save_state.h> |
| 43 | |
| 44 | #ifdef COFF_ENCAPSULATE |
| 45 | #include "a.out.encap.h" |
| 46 | #else |
| 47 | #endif |
| 48 | |
| 49 | /*#include <sys/user.h> After a.out.h */ |
| 50 | #include <sys/file.h> |
| 51 | #include "gdb_stat.h" |
| 52 | #include "gdb_wait.h" |
| 53 | |
| 54 | #include "gdbcore.h" |
| 55 | #include "gdbcmd.h" |
| 56 | #include "target.h" |
| 57 | #include "symfile.h" |
| 58 | #include "objfiles.h" |
| 59 | |
| 60 | /* To support detection of the pseudo-initial frame |
| 61 | that threads have. */ |
| 62 | #define THREAD_INITIAL_FRAME_SYMBOL "__pthread_exit" |
| 63 | #define THREAD_INITIAL_FRAME_SYM_LEN sizeof(THREAD_INITIAL_FRAME_SYMBOL) |
| 64 | |
| 65 | static int extract_5_load PARAMS ((unsigned int)); |
| 66 | |
| 67 | static unsigned extract_5R_store PARAMS ((unsigned int)); |
| 68 | |
| 69 | static unsigned extract_5r_store PARAMS ((unsigned int)); |
| 70 | |
| 71 | static void find_dummy_frame_regs PARAMS ((struct frame_info *, |
| 72 | struct frame_saved_regs *)); |
| 73 | |
| 74 | static int find_proc_framesize PARAMS ((CORE_ADDR)); |
| 75 | |
| 76 | static int find_return_regnum PARAMS ((CORE_ADDR)); |
| 77 | |
| 78 | struct unwind_table_entry *find_unwind_entry PARAMS ((CORE_ADDR)); |
| 79 | |
| 80 | static int extract_17 PARAMS ((unsigned int)); |
| 81 | |
| 82 | static unsigned deposit_21 PARAMS ((unsigned int, unsigned int)); |
| 83 | |
| 84 | static int extract_21 PARAMS ((unsigned)); |
| 85 | |
| 86 | static unsigned deposit_14 PARAMS ((int, unsigned int)); |
| 87 | |
| 88 | static int extract_14 PARAMS ((unsigned)); |
| 89 | |
| 90 | static void unwind_command PARAMS ((char *, int)); |
| 91 | |
| 92 | static int low_sign_extend PARAMS ((unsigned int, unsigned int)); |
| 93 | |
| 94 | static int sign_extend PARAMS ((unsigned int, unsigned int)); |
| 95 | |
| 96 | static int restore_pc_queue PARAMS ((struct frame_saved_regs *)); |
| 97 | |
| 98 | static int hppa_alignof PARAMS ((struct type *)); |
| 99 | |
| 100 | /* To support multi-threading and stepping. */ |
| 101 | int hppa_prepare_to_proceed PARAMS (()); |
| 102 | |
| 103 | static int prologue_inst_adjust_sp PARAMS ((unsigned long)); |
| 104 | |
| 105 | static int is_branch PARAMS ((unsigned long)); |
| 106 | |
| 107 | static int inst_saves_gr PARAMS ((unsigned long)); |
| 108 | |
| 109 | static int inst_saves_fr PARAMS ((unsigned long)); |
| 110 | |
| 111 | static int pc_in_interrupt_handler PARAMS ((CORE_ADDR)); |
| 112 | |
| 113 | static int pc_in_linker_stub PARAMS ((CORE_ADDR)); |
| 114 | |
| 115 | static int compare_unwind_entries PARAMS ((const void *, const void *)); |
| 116 | |
| 117 | static void read_unwind_info PARAMS ((struct objfile *)); |
| 118 | |
| 119 | static void internalize_unwinds PARAMS ((struct objfile *, |
| 120 | struct unwind_table_entry *, |
| 121 | asection *, unsigned int, |
| 122 | unsigned int, CORE_ADDR)); |
| 123 | static void pa_print_registers PARAMS ((char *, int, int)); |
| 124 | static void pa_strcat_registers (char *, int, int, struct ui_file *); |
| 125 | static void pa_register_look_aside PARAMS ((char *, int, long *)); |
| 126 | static void pa_print_fp_reg PARAMS ((int)); |
| 127 | static void pa_strcat_fp_reg (int, struct ui_file *, enum precision_type); |
| 128 | static void record_text_segment_lowaddr PARAMS ((bfd *, asection *, void *)); |
| 129 | |
| 130 | typedef struct |
| 131 | { |
| 132 | struct minimal_symbol *msym; |
| 133 | CORE_ADDR solib_handle; |
| 134 | CORE_ADDR return_val; |
| 135 | } |
| 136 | args_for_find_stub; |
| 137 | |
| 138 | static int cover_find_stub_with_shl_get (PTR); |
| 139 | |
| 140 | static int is_pa_2 = 0; /* False */ |
| 141 | |
| 142 | /* This is declared in symtab.c; set to 1 in hp-symtab-read.c */ |
| 143 | extern int hp_som_som_object_present; |
| 144 | |
| 145 | /* In breakpoint.c */ |
| 146 | extern int exception_catchpoints_are_fragile; |
| 147 | |
| 148 | /* This is defined in valops.c. */ |
| 149 | extern value_ptr |
| 150 | find_function_in_inferior PARAMS ((char *)); |
| 151 | |
| 152 | /* Should call_function allocate stack space for a struct return? */ |
| 153 | int |
| 154 | hppa_use_struct_convention (gcc_p, type) |
| 155 | int gcc_p; |
| 156 | struct type *type; |
| 157 | { |
| 158 | return (TYPE_LENGTH (type) > 2 * REGISTER_SIZE); |
| 159 | } |
| 160 | \f |
| 161 | |
| 162 | /* Routines to extract various sized constants out of hppa |
| 163 | instructions. */ |
| 164 | |
| 165 | /* This assumes that no garbage lies outside of the lower bits of |
| 166 | value. */ |
| 167 | |
| 168 | static int |
| 169 | sign_extend (val, bits) |
| 170 | unsigned val, bits; |
| 171 | { |
| 172 | return (int) (val >> (bits - 1) ? (-1 << bits) | val : val); |
| 173 | } |
| 174 | |
| 175 | /* For many immediate values the sign bit is the low bit! */ |
| 176 | |
| 177 | static int |
| 178 | low_sign_extend (val, bits) |
| 179 | unsigned val, bits; |
| 180 | { |
| 181 | return (int) ((val & 0x1 ? (-1 << (bits - 1)) : 0) | val >> 1); |
| 182 | } |
| 183 | |
| 184 | /* extract the immediate field from a ld{bhw}s instruction */ |
| 185 | |
| 186 | static int |
| 187 | extract_5_load (word) |
| 188 | unsigned word; |
| 189 | { |
| 190 | return low_sign_extend (word >> 16 & MASK_5, 5); |
| 191 | } |
| 192 | |
| 193 | /* extract the immediate field from a break instruction */ |
| 194 | |
| 195 | static unsigned |
| 196 | extract_5r_store (word) |
| 197 | unsigned word; |
| 198 | { |
| 199 | return (word & MASK_5); |
| 200 | } |
| 201 | |
| 202 | /* extract the immediate field from a {sr}sm instruction */ |
| 203 | |
| 204 | static unsigned |
| 205 | extract_5R_store (word) |
| 206 | unsigned word; |
| 207 | { |
| 208 | return (word >> 16 & MASK_5); |
| 209 | } |
| 210 | |
| 211 | /* extract a 14 bit immediate field */ |
| 212 | |
| 213 | static int |
| 214 | extract_14 (word) |
| 215 | unsigned word; |
| 216 | { |
| 217 | return low_sign_extend (word & MASK_14, 14); |
| 218 | } |
| 219 | |
| 220 | /* deposit a 14 bit constant in a word */ |
| 221 | |
| 222 | static unsigned |
| 223 | deposit_14 (opnd, word) |
| 224 | int opnd; |
| 225 | unsigned word; |
| 226 | { |
| 227 | unsigned sign = (opnd < 0 ? 1 : 0); |
| 228 | |
| 229 | return word | ((unsigned) opnd << 1 & MASK_14) | sign; |
| 230 | } |
| 231 | |
| 232 | /* extract a 21 bit constant */ |
| 233 | |
| 234 | static int |
| 235 | extract_21 (word) |
| 236 | unsigned word; |
| 237 | { |
| 238 | int val; |
| 239 | |
| 240 | word &= MASK_21; |
| 241 | word <<= 11; |
| 242 | val = GET_FIELD (word, 20, 20); |
| 243 | val <<= 11; |
| 244 | val |= GET_FIELD (word, 9, 19); |
| 245 | val <<= 2; |
| 246 | val |= GET_FIELD (word, 5, 6); |
| 247 | val <<= 5; |
| 248 | val |= GET_FIELD (word, 0, 4); |
| 249 | val <<= 2; |
| 250 | val |= GET_FIELD (word, 7, 8); |
| 251 | return sign_extend (val, 21) << 11; |
| 252 | } |
| 253 | |
| 254 | /* deposit a 21 bit constant in a word. Although 21 bit constants are |
| 255 | usually the top 21 bits of a 32 bit constant, we assume that only |
| 256 | the low 21 bits of opnd are relevant */ |
| 257 | |
| 258 | static unsigned |
| 259 | deposit_21 (opnd, word) |
| 260 | unsigned opnd, word; |
| 261 | { |
| 262 | unsigned val = 0; |
| 263 | |
| 264 | val |= GET_FIELD (opnd, 11 + 14, 11 + 18); |
| 265 | val <<= 2; |
| 266 | val |= GET_FIELD (opnd, 11 + 12, 11 + 13); |
| 267 | val <<= 2; |
| 268 | val |= GET_FIELD (opnd, 11 + 19, 11 + 20); |
| 269 | val <<= 11; |
| 270 | val |= GET_FIELD (opnd, 11 + 1, 11 + 11); |
| 271 | val <<= 1; |
| 272 | val |= GET_FIELD (opnd, 11 + 0, 11 + 0); |
| 273 | return word | val; |
| 274 | } |
| 275 | |
| 276 | /* extract a 17 bit constant from branch instructions, returning the |
| 277 | 19 bit signed value. */ |
| 278 | |
| 279 | static int |
| 280 | extract_17 (word) |
| 281 | unsigned word; |
| 282 | { |
| 283 | return sign_extend (GET_FIELD (word, 19, 28) | |
| 284 | GET_FIELD (word, 29, 29) << 10 | |
| 285 | GET_FIELD (word, 11, 15) << 11 | |
| 286 | (word & 0x1) << 16, 17) << 2; |
| 287 | } |
| 288 | \f |
| 289 | |
| 290 | /* Compare the start address for two unwind entries returning 1 if |
| 291 | the first address is larger than the second, -1 if the second is |
| 292 | larger than the first, and zero if they are equal. */ |
| 293 | |
| 294 | static int |
| 295 | compare_unwind_entries (arg1, arg2) |
| 296 | const void *arg1; |
| 297 | const void *arg2; |
| 298 | { |
| 299 | const struct unwind_table_entry *a = arg1; |
| 300 | const struct unwind_table_entry *b = arg2; |
| 301 | |
| 302 | if (a->region_start > b->region_start) |
| 303 | return 1; |
| 304 | else if (a->region_start < b->region_start) |
| 305 | return -1; |
| 306 | else |
| 307 | return 0; |
| 308 | } |
| 309 | |
| 310 | static CORE_ADDR low_text_segment_address; |
| 311 | |
| 312 | static void |
| 313 | record_text_segment_lowaddr (abfd, section, ignored) |
| 314 | bfd *abfd ATTRIBUTE_UNUSED; |
| 315 | asection *section; |
| 316 | PTR ignored ATTRIBUTE_UNUSED; |
| 317 | { |
| 318 | if ((section->flags & (SEC_ALLOC | SEC_LOAD | SEC_READONLY) |
| 319 | == (SEC_ALLOC | SEC_LOAD | SEC_READONLY)) |
| 320 | && section->vma < low_text_segment_address) |
| 321 | low_text_segment_address = section->vma; |
| 322 | } |
| 323 | |
| 324 | static void |
| 325 | internalize_unwinds (objfile, table, section, entries, size, text_offset) |
| 326 | struct objfile *objfile; |
| 327 | struct unwind_table_entry *table; |
| 328 | asection *section; |
| 329 | unsigned int entries, size; |
| 330 | CORE_ADDR text_offset; |
| 331 | { |
| 332 | /* We will read the unwind entries into temporary memory, then |
| 333 | fill in the actual unwind table. */ |
| 334 | if (size > 0) |
| 335 | { |
| 336 | unsigned long tmp; |
| 337 | unsigned i; |
| 338 | char *buf = alloca (size); |
| 339 | |
| 340 | low_text_segment_address = -1; |
| 341 | |
| 342 | /* If addresses are 64 bits wide, then unwinds are supposed to |
| 343 | be segment relative offsets instead of absolute addresses. |
| 344 | |
| 345 | Note that when loading a shared library (text_offset != 0) the |
| 346 | unwinds are already relative to the text_offset that will be |
| 347 | passed in. */ |
| 348 | if (TARGET_PTR_BIT == 64 && text_offset == 0) |
| 349 | { |
| 350 | bfd_map_over_sections (objfile->obfd, |
| 351 | record_text_segment_lowaddr, (PTR) NULL); |
| 352 | |
| 353 | /* ?!? Mask off some low bits. Should this instead subtract |
| 354 | out the lowest section's filepos or something like that? |
| 355 | This looks very hokey to me. */ |
| 356 | low_text_segment_address &= ~0xfff; |
| 357 | text_offset += low_text_segment_address; |
| 358 | } |
| 359 | |
| 360 | bfd_get_section_contents (objfile->obfd, section, buf, 0, size); |
| 361 | |
| 362 | /* Now internalize the information being careful to handle host/target |
| 363 | endian issues. */ |
| 364 | for (i = 0; i < entries; i++) |
| 365 | { |
| 366 | table[i].region_start = bfd_get_32 (objfile->obfd, |
| 367 | (bfd_byte *) buf); |
| 368 | table[i].region_start += text_offset; |
| 369 | buf += 4; |
| 370 | table[i].region_end = bfd_get_32 (objfile->obfd, (bfd_byte *) buf); |
| 371 | table[i].region_end += text_offset; |
| 372 | buf += 4; |
| 373 | tmp = bfd_get_32 (objfile->obfd, (bfd_byte *) buf); |
| 374 | buf += 4; |
| 375 | table[i].Cannot_unwind = (tmp >> 31) & 0x1; |
| 376 | table[i].Millicode = (tmp >> 30) & 0x1; |
| 377 | table[i].Millicode_save_sr0 = (tmp >> 29) & 0x1; |
| 378 | table[i].Region_description = (tmp >> 27) & 0x3; |
| 379 | table[i].reserved1 = (tmp >> 26) & 0x1; |
| 380 | table[i].Entry_SR = (tmp >> 25) & 0x1; |
| 381 | table[i].Entry_FR = (tmp >> 21) & 0xf; |
| 382 | table[i].Entry_GR = (tmp >> 16) & 0x1f; |
| 383 | table[i].Args_stored = (tmp >> 15) & 0x1; |
| 384 | table[i].Variable_Frame = (tmp >> 14) & 0x1; |
| 385 | table[i].Separate_Package_Body = (tmp >> 13) & 0x1; |
| 386 | table[i].Frame_Extension_Millicode = (tmp >> 12) & 0x1; |
| 387 | table[i].Stack_Overflow_Check = (tmp >> 11) & 0x1; |
| 388 | table[i].Two_Instruction_SP_Increment = (tmp >> 10) & 0x1; |
| 389 | table[i].Ada_Region = (tmp >> 9) & 0x1; |
| 390 | table[i].cxx_info = (tmp >> 8) & 0x1; |
| 391 | table[i].cxx_try_catch = (tmp >> 7) & 0x1; |
| 392 | table[i].sched_entry_seq = (tmp >> 6) & 0x1; |
| 393 | table[i].reserved2 = (tmp >> 5) & 0x1; |
| 394 | table[i].Save_SP = (tmp >> 4) & 0x1; |
| 395 | table[i].Save_RP = (tmp >> 3) & 0x1; |
| 396 | table[i].Save_MRP_in_frame = (tmp >> 2) & 0x1; |
| 397 | table[i].extn_ptr_defined = (tmp >> 1) & 0x1; |
| 398 | table[i].Cleanup_defined = tmp & 0x1; |
| 399 | tmp = bfd_get_32 (objfile->obfd, (bfd_byte *) buf); |
| 400 | buf += 4; |
| 401 | table[i].MPE_XL_interrupt_marker = (tmp >> 31) & 0x1; |
| 402 | table[i].HP_UX_interrupt_marker = (tmp >> 30) & 0x1; |
| 403 | table[i].Large_frame = (tmp >> 29) & 0x1; |
| 404 | table[i].Pseudo_SP_Set = (tmp >> 28) & 0x1; |
| 405 | table[i].reserved4 = (tmp >> 27) & 0x1; |
| 406 | table[i].Total_frame_size = tmp & 0x7ffffff; |
| 407 | |
| 408 | /* Stub unwinds are handled elsewhere. */ |
| 409 | table[i].stub_unwind.stub_type = 0; |
| 410 | table[i].stub_unwind.padding = 0; |
| 411 | } |
| 412 | } |
| 413 | } |
| 414 | |
| 415 | /* Read in the backtrace information stored in the `$UNWIND_START$' section of |
| 416 | the object file. This info is used mainly by find_unwind_entry() to find |
| 417 | out the stack frame size and frame pointer used by procedures. We put |
| 418 | everything on the psymbol obstack in the objfile so that it automatically |
| 419 | gets freed when the objfile is destroyed. */ |
| 420 | |
| 421 | static void |
| 422 | read_unwind_info (objfile) |
| 423 | struct objfile *objfile; |
| 424 | { |
| 425 | asection *unwind_sec, *stub_unwind_sec; |
| 426 | unsigned unwind_size, stub_unwind_size, total_size; |
| 427 | unsigned index, unwind_entries; |
| 428 | unsigned stub_entries, total_entries; |
| 429 | CORE_ADDR text_offset; |
| 430 | struct obj_unwind_info *ui; |
| 431 | obj_private_data_t *obj_private; |
| 432 | |
| 433 | text_offset = ANOFFSET (objfile->section_offsets, 0); |
| 434 | ui = (struct obj_unwind_info *) obstack_alloc (&objfile->psymbol_obstack, |
| 435 | sizeof (struct obj_unwind_info)); |
| 436 | |
| 437 | ui->table = NULL; |
| 438 | ui->cache = NULL; |
| 439 | ui->last = -1; |
| 440 | |
| 441 | /* For reasons unknown the HP PA64 tools generate multiple unwinder |
| 442 | sections in a single executable. So we just iterate over every |
| 443 | section in the BFD looking for unwinder sections intead of trying |
| 444 | to do a lookup with bfd_get_section_by_name. |
| 445 | |
| 446 | First determine the total size of the unwind tables so that we |
| 447 | can allocate memory in a nice big hunk. */ |
| 448 | total_entries = 0; |
| 449 | for (unwind_sec = objfile->obfd->sections; |
| 450 | unwind_sec; |
| 451 | unwind_sec = unwind_sec->next) |
| 452 | { |
| 453 | if (strcmp (unwind_sec->name, "$UNWIND_START$") == 0 |
| 454 | || strcmp (unwind_sec->name, ".PARISC.unwind") == 0) |
| 455 | { |
| 456 | unwind_size = bfd_section_size (objfile->obfd, unwind_sec); |
| 457 | unwind_entries = unwind_size / UNWIND_ENTRY_SIZE; |
| 458 | |
| 459 | total_entries += unwind_entries; |
| 460 | } |
| 461 | } |
| 462 | |
| 463 | /* Now compute the size of the stub unwinds. Note the ELF tools do not |
| 464 | use stub unwinds at the curren time. */ |
| 465 | stub_unwind_sec = bfd_get_section_by_name (objfile->obfd, "$UNWIND_END$"); |
| 466 | |
| 467 | if (stub_unwind_sec) |
| 468 | { |
| 469 | stub_unwind_size = bfd_section_size (objfile->obfd, stub_unwind_sec); |
| 470 | stub_entries = stub_unwind_size / STUB_UNWIND_ENTRY_SIZE; |
| 471 | } |
| 472 | else |
| 473 | { |
| 474 | stub_unwind_size = 0; |
| 475 | stub_entries = 0; |
| 476 | } |
| 477 | |
| 478 | /* Compute total number of unwind entries and their total size. */ |
| 479 | total_entries += stub_entries; |
| 480 | total_size = total_entries * sizeof (struct unwind_table_entry); |
| 481 | |
| 482 | /* Allocate memory for the unwind table. */ |
| 483 | ui->table = (struct unwind_table_entry *) |
| 484 | obstack_alloc (&objfile->psymbol_obstack, total_size); |
| 485 | ui->last = total_entries - 1; |
| 486 | |
| 487 | /* Now read in each unwind section and internalize the standard unwind |
| 488 | entries. */ |
| 489 | index = 0; |
| 490 | for (unwind_sec = objfile->obfd->sections; |
| 491 | unwind_sec; |
| 492 | unwind_sec = unwind_sec->next) |
| 493 | { |
| 494 | if (strcmp (unwind_sec->name, "$UNWIND_START$") == 0 |
| 495 | || strcmp (unwind_sec->name, ".PARISC.unwind") == 0) |
| 496 | { |
| 497 | unwind_size = bfd_section_size (objfile->obfd, unwind_sec); |
| 498 | unwind_entries = unwind_size / UNWIND_ENTRY_SIZE; |
| 499 | |
| 500 | internalize_unwinds (objfile, &ui->table[index], unwind_sec, |
| 501 | unwind_entries, unwind_size, text_offset); |
| 502 | index += unwind_entries; |
| 503 | } |
| 504 | } |
| 505 | |
| 506 | /* Now read in and internalize the stub unwind entries. */ |
| 507 | if (stub_unwind_size > 0) |
| 508 | { |
| 509 | unsigned int i; |
| 510 | char *buf = alloca (stub_unwind_size); |
| 511 | |
| 512 | /* Read in the stub unwind entries. */ |
| 513 | bfd_get_section_contents (objfile->obfd, stub_unwind_sec, buf, |
| 514 | 0, stub_unwind_size); |
| 515 | |
| 516 | /* Now convert them into regular unwind entries. */ |
| 517 | for (i = 0; i < stub_entries; i++, index++) |
| 518 | { |
| 519 | /* Clear out the next unwind entry. */ |
| 520 | memset (&ui->table[index], 0, sizeof (struct unwind_table_entry)); |
| 521 | |
| 522 | /* Convert offset & size into region_start and region_end. |
| 523 | Stuff away the stub type into "reserved" fields. */ |
| 524 | ui->table[index].region_start = bfd_get_32 (objfile->obfd, |
| 525 | (bfd_byte *) buf); |
| 526 | ui->table[index].region_start += text_offset; |
| 527 | buf += 4; |
| 528 | ui->table[index].stub_unwind.stub_type = bfd_get_8 (objfile->obfd, |
| 529 | (bfd_byte *) buf); |
| 530 | buf += 2; |
| 531 | ui->table[index].region_end |
| 532 | = ui->table[index].region_start + 4 * |
| 533 | (bfd_get_16 (objfile->obfd, (bfd_byte *) buf) - 1); |
| 534 | buf += 2; |
| 535 | } |
| 536 | |
| 537 | } |
| 538 | |
| 539 | /* Unwind table needs to be kept sorted. */ |
| 540 | qsort (ui->table, total_entries, sizeof (struct unwind_table_entry), |
| 541 | compare_unwind_entries); |
| 542 | |
| 543 | /* Keep a pointer to the unwind information. */ |
| 544 | if (objfile->obj_private == NULL) |
| 545 | { |
| 546 | obj_private = (obj_private_data_t *) |
| 547 | obstack_alloc (&objfile->psymbol_obstack, |
| 548 | sizeof (obj_private_data_t)); |
| 549 | obj_private->unwind_info = NULL; |
| 550 | obj_private->so_info = NULL; |
| 551 | obj_private->dp = 0; |
| 552 | |
| 553 | objfile->obj_private = (PTR) obj_private; |
| 554 | } |
| 555 | obj_private = (obj_private_data_t *) objfile->obj_private; |
| 556 | obj_private->unwind_info = ui; |
| 557 | } |
| 558 | |
| 559 | /* Lookup the unwind (stack backtrace) info for the given PC. We search all |
| 560 | of the objfiles seeking the unwind table entry for this PC. Each objfile |
| 561 | contains a sorted list of struct unwind_table_entry. Since we do a binary |
| 562 | search of the unwind tables, we depend upon them to be sorted. */ |
| 563 | |
| 564 | struct unwind_table_entry * |
| 565 | find_unwind_entry (pc) |
| 566 | CORE_ADDR pc; |
| 567 | { |
| 568 | int first, middle, last; |
| 569 | struct objfile *objfile; |
| 570 | |
| 571 | /* A function at address 0? Not in HP-UX! */ |
| 572 | if (pc == (CORE_ADDR) 0) |
| 573 | return NULL; |
| 574 | |
| 575 | ALL_OBJFILES (objfile) |
| 576 | { |
| 577 | struct obj_unwind_info *ui; |
| 578 | ui = NULL; |
| 579 | if (objfile->obj_private) |
| 580 | ui = ((obj_private_data_t *) (objfile->obj_private))->unwind_info; |
| 581 | |
| 582 | if (!ui) |
| 583 | { |
| 584 | read_unwind_info (objfile); |
| 585 | if (objfile->obj_private == NULL) |
| 586 | error ("Internal error reading unwind information."); |
| 587 | ui = ((obj_private_data_t *) (objfile->obj_private))->unwind_info; |
| 588 | } |
| 589 | |
| 590 | /* First, check the cache */ |
| 591 | |
| 592 | if (ui->cache |
| 593 | && pc >= ui->cache->region_start |
| 594 | && pc <= ui->cache->region_end) |
| 595 | return ui->cache; |
| 596 | |
| 597 | /* Not in the cache, do a binary search */ |
| 598 | |
| 599 | first = 0; |
| 600 | last = ui->last; |
| 601 | |
| 602 | while (first <= last) |
| 603 | { |
| 604 | middle = (first + last) / 2; |
| 605 | if (pc >= ui->table[middle].region_start |
| 606 | && pc <= ui->table[middle].region_end) |
| 607 | { |
| 608 | ui->cache = &ui->table[middle]; |
| 609 | return &ui->table[middle]; |
| 610 | } |
| 611 | |
| 612 | if (pc < ui->table[middle].region_start) |
| 613 | last = middle - 1; |
| 614 | else |
| 615 | first = middle + 1; |
| 616 | } |
| 617 | } /* ALL_OBJFILES() */ |
| 618 | return NULL; |
| 619 | } |
| 620 | |
| 621 | /* Return the adjustment necessary to make for addresses on the stack |
| 622 | as presented by hpread.c. |
| 623 | |
| 624 | This is necessary because of the stack direction on the PA and the |
| 625 | bizarre way in which someone (?) decided they wanted to handle |
| 626 | frame pointerless code in GDB. */ |
| 627 | int |
| 628 | hpread_adjust_stack_address (func_addr) |
| 629 | CORE_ADDR func_addr; |
| 630 | { |
| 631 | struct unwind_table_entry *u; |
| 632 | |
| 633 | u = find_unwind_entry (func_addr); |
| 634 | if (!u) |
| 635 | return 0; |
| 636 | else |
| 637 | return u->Total_frame_size << 3; |
| 638 | } |
| 639 | |
| 640 | /* Called to determine if PC is in an interrupt handler of some |
| 641 | kind. */ |
| 642 | |
| 643 | static int |
| 644 | pc_in_interrupt_handler (pc) |
| 645 | CORE_ADDR pc; |
| 646 | { |
| 647 | struct unwind_table_entry *u; |
| 648 | struct minimal_symbol *msym_us; |
| 649 | |
| 650 | u = find_unwind_entry (pc); |
| 651 | if (!u) |
| 652 | return 0; |
| 653 | |
| 654 | /* Oh joys. HPUX sets the interrupt bit for _sigreturn even though |
| 655 | its frame isn't a pure interrupt frame. Deal with this. */ |
| 656 | msym_us = lookup_minimal_symbol_by_pc (pc); |
| 657 | |
| 658 | return u->HP_UX_interrupt_marker && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us)); |
| 659 | } |
| 660 | |
| 661 | /* Called when no unwind descriptor was found for PC. Returns 1 if it |
| 662 | appears that PC is in a linker stub. |
| 663 | |
| 664 | ?!? Need to handle stubs which appear in PA64 code. */ |
| 665 | |
| 666 | static int |
| 667 | pc_in_linker_stub (pc) |
| 668 | CORE_ADDR pc; |
| 669 | { |
| 670 | int found_magic_instruction = 0; |
| 671 | int i; |
| 672 | char buf[4]; |
| 673 | |
| 674 | /* If unable to read memory, assume pc is not in a linker stub. */ |
| 675 | if (target_read_memory (pc, buf, 4) != 0) |
| 676 | return 0; |
| 677 | |
| 678 | /* We are looking for something like |
| 679 | |
| 680 | ; $$dyncall jams RP into this special spot in the frame (RP') |
| 681 | ; before calling the "call stub" |
| 682 | ldw -18(sp),rp |
| 683 | |
| 684 | ldsid (rp),r1 ; Get space associated with RP into r1 |
| 685 | mtsp r1,sp ; Move it into space register 0 |
| 686 | be,n 0(sr0),rp) ; back to your regularly scheduled program */ |
| 687 | |
| 688 | /* Maximum known linker stub size is 4 instructions. Search forward |
| 689 | from the given PC, then backward. */ |
| 690 | for (i = 0; i < 4; i++) |
| 691 | { |
| 692 | /* If we hit something with an unwind, stop searching this direction. */ |
| 693 | |
| 694 | if (find_unwind_entry (pc + i * 4) != 0) |
| 695 | break; |
| 696 | |
| 697 | /* Check for ldsid (rp),r1 which is the magic instruction for a |
| 698 | return from a cross-space function call. */ |
| 699 | if (read_memory_integer (pc + i * 4, 4) == 0x004010a1) |
| 700 | { |
| 701 | found_magic_instruction = 1; |
| 702 | break; |
| 703 | } |
| 704 | /* Add code to handle long call/branch and argument relocation stubs |
| 705 | here. */ |
| 706 | } |
| 707 | |
| 708 | if (found_magic_instruction != 0) |
| 709 | return 1; |
| 710 | |
| 711 | /* Now look backward. */ |
| 712 | for (i = 0; i < 4; i++) |
| 713 | { |
| 714 | /* If we hit something with an unwind, stop searching this direction. */ |
| 715 | |
| 716 | if (find_unwind_entry (pc - i * 4) != 0) |
| 717 | break; |
| 718 | |
| 719 | /* Check for ldsid (rp),r1 which is the magic instruction for a |
| 720 | return from a cross-space function call. */ |
| 721 | if (read_memory_integer (pc - i * 4, 4) == 0x004010a1) |
| 722 | { |
| 723 | found_magic_instruction = 1; |
| 724 | break; |
| 725 | } |
| 726 | /* Add code to handle long call/branch and argument relocation stubs |
| 727 | here. */ |
| 728 | } |
| 729 | return found_magic_instruction; |
| 730 | } |
| 731 | |
| 732 | static int |
| 733 | find_return_regnum (pc) |
| 734 | CORE_ADDR pc; |
| 735 | { |
| 736 | struct unwind_table_entry *u; |
| 737 | |
| 738 | u = find_unwind_entry (pc); |
| 739 | |
| 740 | if (!u) |
| 741 | return RP_REGNUM; |
| 742 | |
| 743 | if (u->Millicode) |
| 744 | return 31; |
| 745 | |
| 746 | return RP_REGNUM; |
| 747 | } |
| 748 | |
| 749 | /* Return size of frame, or -1 if we should use a frame pointer. */ |
| 750 | static int |
| 751 | find_proc_framesize (pc) |
| 752 | CORE_ADDR pc; |
| 753 | { |
| 754 | struct unwind_table_entry *u; |
| 755 | struct minimal_symbol *msym_us; |
| 756 | |
| 757 | /* This may indicate a bug in our callers... */ |
| 758 | if (pc == (CORE_ADDR) 0) |
| 759 | return -1; |
| 760 | |
| 761 | u = find_unwind_entry (pc); |
| 762 | |
| 763 | if (!u) |
| 764 | { |
| 765 | if (pc_in_linker_stub (pc)) |
| 766 | /* Linker stubs have a zero size frame. */ |
| 767 | return 0; |
| 768 | else |
| 769 | return -1; |
| 770 | } |
| 771 | |
| 772 | msym_us = lookup_minimal_symbol_by_pc (pc); |
| 773 | |
| 774 | /* If Save_SP is set, and we're not in an interrupt or signal caller, |
| 775 | then we have a frame pointer. Use it. */ |
| 776 | if (u->Save_SP && !pc_in_interrupt_handler (pc) |
| 777 | && !IN_SIGTRAMP (pc, SYMBOL_NAME (msym_us))) |
| 778 | return -1; |
| 779 | |
| 780 | return u->Total_frame_size << 3; |
| 781 | } |
| 782 | |
| 783 | /* Return offset from sp at which rp is saved, or 0 if not saved. */ |
| 784 | static int rp_saved PARAMS ((CORE_ADDR)); |
| 785 | |
| 786 | static int |
| 787 | rp_saved (pc) |
| 788 | CORE_ADDR pc; |
| 789 | { |
| 790 | struct unwind_table_entry *u; |
| 791 | |
| 792 | /* A function at, and thus a return PC from, address 0? Not in HP-UX! */ |
| 793 | if (pc == (CORE_ADDR) 0) |
| 794 | return 0; |
| 795 | |
| 796 | u = find_unwind_entry (pc); |
| 797 | |
| 798 | if (!u) |
| 799 | { |
| 800 | if (pc_in_linker_stub (pc)) |
| 801 | /* This is the so-called RP'. */ |
| 802 | return -24; |
| 803 | else |
| 804 | return 0; |
| 805 | } |
| 806 | |
| 807 | if (u->Save_RP) |
| 808 | return (TARGET_PTR_BIT == 64 ? -16 : -20); |
| 809 | else if (u->stub_unwind.stub_type != 0) |
| 810 | { |
| 811 | switch (u->stub_unwind.stub_type) |
| 812 | { |
| 813 | case EXPORT: |
| 814 | case IMPORT: |
| 815 | return -24; |
| 816 | case PARAMETER_RELOCATION: |
| 817 | return -8; |
| 818 | default: |
| 819 | return 0; |
| 820 | } |
| 821 | } |
| 822 | else |
| 823 | return 0; |
| 824 | } |
| 825 | \f |
| 826 | int |
| 827 | frameless_function_invocation (frame) |
| 828 | struct frame_info *frame; |
| 829 | { |
| 830 | struct unwind_table_entry *u; |
| 831 | |
| 832 | u = find_unwind_entry (frame->pc); |
| 833 | |
| 834 | if (u == 0) |
| 835 | return 0; |
| 836 | |
| 837 | return (u->Total_frame_size == 0 && u->stub_unwind.stub_type == 0); |
| 838 | } |
| 839 | |
| 840 | CORE_ADDR |
| 841 | saved_pc_after_call (frame) |
| 842 | struct frame_info *frame; |
| 843 | { |
| 844 | int ret_regnum; |
| 845 | CORE_ADDR pc; |
| 846 | struct unwind_table_entry *u; |
| 847 | |
| 848 | ret_regnum = find_return_regnum (get_frame_pc (frame)); |
| 849 | pc = read_register (ret_regnum) & ~0x3; |
| 850 | |
| 851 | /* If PC is in a linker stub, then we need to dig the address |
| 852 | the stub will return to out of the stack. */ |
| 853 | u = find_unwind_entry (pc); |
| 854 | if (u && u->stub_unwind.stub_type != 0) |
| 855 | return FRAME_SAVED_PC (frame); |
| 856 | else |
| 857 | return pc; |
| 858 | } |
| 859 | \f |
| 860 | CORE_ADDR |
| 861 | hppa_frame_saved_pc (frame) |
| 862 | struct frame_info *frame; |
| 863 | { |
| 864 | CORE_ADDR pc = get_frame_pc (frame); |
| 865 | struct unwind_table_entry *u; |
| 866 | CORE_ADDR old_pc; |
| 867 | int spun_around_loop = 0; |
| 868 | int rp_offset = 0; |
| 869 | |
| 870 | /* BSD, HPUX & OSF1 all lay out the hardware state in the same manner |
| 871 | at the base of the frame in an interrupt handler. Registers within |
| 872 | are saved in the exact same order as GDB numbers registers. How |
| 873 | convienent. */ |
| 874 | if (pc_in_interrupt_handler (pc)) |
| 875 | return read_memory_integer (frame->frame + PC_REGNUM * 4, |
| 876 | TARGET_PTR_BIT / 8) & ~0x3; |
| 877 | |
| 878 | if ((frame->pc >= frame->frame |
| 879 | && frame->pc <= (frame->frame |
| 880 | /* A call dummy is sized in words, but it is |
| 881 | actually a series of instructions. Account |
| 882 | for that scaling factor. */ |
| 883 | + ((REGISTER_SIZE / INSTRUCTION_SIZE) |
| 884 | * CALL_DUMMY_LENGTH) |
| 885 | /* Similarly we have to account for 64bit |
| 886 | wide register saves. */ |
| 887 | + (32 * REGISTER_SIZE) |
| 888 | /* We always consider FP regs 8 bytes long. */ |
| 889 | + (NUM_REGS - FP0_REGNUM) * 8 |
| 890 | /* Similarly we have to account for 64bit |
| 891 | wide register saves. */ |
| 892 | + (6 * REGISTER_SIZE)))) |
| 893 | { |
| 894 | return read_memory_integer ((frame->frame |
| 895 | + (TARGET_PTR_BIT == 64 ? -16 : -20)), |
| 896 | TARGET_PTR_BIT / 8) & ~0x3; |
| 897 | } |
| 898 | |
| 899 | #ifdef FRAME_SAVED_PC_IN_SIGTRAMP |
| 900 | /* Deal with signal handler caller frames too. */ |
| 901 | if (frame->signal_handler_caller) |
| 902 | { |
| 903 | CORE_ADDR rp; |
| 904 | FRAME_SAVED_PC_IN_SIGTRAMP (frame, &rp); |
| 905 | return rp & ~0x3; |
| 906 | } |
| 907 | #endif |
| 908 | |
| 909 | if (frameless_function_invocation (frame)) |
| 910 | { |
| 911 | int ret_regnum; |
| 912 | |
| 913 | ret_regnum = find_return_regnum (pc); |
| 914 | |
| 915 | /* If the next frame is an interrupt frame or a signal |
| 916 | handler caller, then we need to look in the saved |
| 917 | register area to get the return pointer (the values |
| 918 | in the registers may not correspond to anything useful). */ |
| 919 | if (frame->next |
| 920 | && (frame->next->signal_handler_caller |
| 921 | || pc_in_interrupt_handler (frame->next->pc))) |
| 922 | { |
| 923 | struct frame_saved_regs saved_regs; |
| 924 | |
| 925 | get_frame_saved_regs (frame->next, &saved_regs); |
| 926 | if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], |
| 927 | TARGET_PTR_BIT / 8) & 0x2) |
| 928 | { |
| 929 | pc = read_memory_integer (saved_regs.regs[31], |
| 930 | TARGET_PTR_BIT / 8) & ~0x3; |
| 931 | |
| 932 | /* Syscalls are really two frames. The syscall stub itself |
| 933 | with a return pointer in %rp and the kernel call with |
| 934 | a return pointer in %r31. We return the %rp variant |
| 935 | if %r31 is the same as frame->pc. */ |
| 936 | if (pc == frame->pc) |
| 937 | pc = read_memory_integer (saved_regs.regs[RP_REGNUM], |
| 938 | TARGET_PTR_BIT / 8) & ~0x3; |
| 939 | } |
| 940 | else |
| 941 | pc = read_memory_integer (saved_regs.regs[RP_REGNUM], |
| 942 | TARGET_PTR_BIT / 8) & ~0x3; |
| 943 | } |
| 944 | else |
| 945 | pc = read_register (ret_regnum) & ~0x3; |
| 946 | } |
| 947 | else |
| 948 | { |
| 949 | spun_around_loop = 0; |
| 950 | old_pc = pc; |
| 951 | |
| 952 | restart: |
| 953 | rp_offset = rp_saved (pc); |
| 954 | |
| 955 | /* Similar to code in frameless function case. If the next |
| 956 | frame is a signal or interrupt handler, then dig the right |
| 957 | information out of the saved register info. */ |
| 958 | if (rp_offset == 0 |
| 959 | && frame->next |
| 960 | && (frame->next->signal_handler_caller |
| 961 | || pc_in_interrupt_handler (frame->next->pc))) |
| 962 | { |
| 963 | struct frame_saved_regs saved_regs; |
| 964 | |
| 965 | get_frame_saved_regs (frame->next, &saved_regs); |
| 966 | if (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], |
| 967 | TARGET_PTR_BIT / 8) & 0x2) |
| 968 | { |
| 969 | pc = read_memory_integer (saved_regs.regs[31], |
| 970 | TARGET_PTR_BIT / 8) & ~0x3; |
| 971 | |
| 972 | /* Syscalls are really two frames. The syscall stub itself |
| 973 | with a return pointer in %rp and the kernel call with |
| 974 | a return pointer in %r31. We return the %rp variant |
| 975 | if %r31 is the same as frame->pc. */ |
| 976 | if (pc == frame->pc) |
| 977 | pc = read_memory_integer (saved_regs.regs[RP_REGNUM], |
| 978 | TARGET_PTR_BIT / 8) & ~0x3; |
| 979 | } |
| 980 | else |
| 981 | pc = read_memory_integer (saved_regs.regs[RP_REGNUM], |
| 982 | TARGET_PTR_BIT / 8) & ~0x3; |
| 983 | } |
| 984 | else if (rp_offset == 0) |
| 985 | { |
| 986 | old_pc = pc; |
| 987 | pc = read_register (RP_REGNUM) & ~0x3; |
| 988 | } |
| 989 | else |
| 990 | { |
| 991 | old_pc = pc; |
| 992 | pc = read_memory_integer (frame->frame + rp_offset, |
| 993 | TARGET_PTR_BIT / 8) & ~0x3; |
| 994 | } |
| 995 | } |
| 996 | |
| 997 | /* If PC is inside a linker stub, then dig out the address the stub |
| 998 | will return to. |
| 999 | |
| 1000 | Don't do this for long branch stubs. Why? For some unknown reason |
| 1001 | _start is marked as a long branch stub in hpux10. */ |
| 1002 | u = find_unwind_entry (pc); |
| 1003 | if (u && u->stub_unwind.stub_type != 0 |
| 1004 | && u->stub_unwind.stub_type != LONG_BRANCH) |
| 1005 | { |
| 1006 | unsigned int insn; |
| 1007 | |
| 1008 | /* If this is a dynamic executable, and we're in a signal handler, |
| 1009 | then the call chain will eventually point us into the stub for |
| 1010 | _sigreturn. Unlike most cases, we'll be pointed to the branch |
| 1011 | to the real sigreturn rather than the code after the real branch!. |
| 1012 | |
| 1013 | Else, try to dig the address the stub will return to in the normal |
| 1014 | fashion. */ |
| 1015 | insn = read_memory_integer (pc, 4); |
| 1016 | if ((insn & 0xfc00e000) == 0xe8000000) |
| 1017 | return (pc + extract_17 (insn) + 8) & ~0x3; |
| 1018 | else |
| 1019 | { |
| 1020 | if (old_pc == pc) |
| 1021 | spun_around_loop++; |
| 1022 | |
| 1023 | if (spun_around_loop > 1) |
| 1024 | { |
| 1025 | /* We're just about to go around the loop again with |
| 1026 | no more hope of success. Die. */ |
| 1027 | error ("Unable to find return pc for this frame"); |
| 1028 | } |
| 1029 | else |
| 1030 | goto restart; |
| 1031 | } |
| 1032 | } |
| 1033 | |
| 1034 | return pc; |
| 1035 | } |
| 1036 | \f |
| 1037 | /* We need to correct the PC and the FP for the outermost frame when we are |
| 1038 | in a system call. */ |
| 1039 | |
| 1040 | void |
| 1041 | init_extra_frame_info (fromleaf, frame) |
| 1042 | int fromleaf; |
| 1043 | struct frame_info *frame; |
| 1044 | { |
| 1045 | int flags; |
| 1046 | int framesize; |
| 1047 | |
| 1048 | if (frame->next && !fromleaf) |
| 1049 | return; |
| 1050 | |
| 1051 | /* If the next frame represents a frameless function invocation |
| 1052 | then we have to do some adjustments that are normally done by |
| 1053 | FRAME_CHAIN. (FRAME_CHAIN is not called in this case.) */ |
| 1054 | if (fromleaf) |
| 1055 | { |
| 1056 | /* Find the framesize of *this* frame without peeking at the PC |
| 1057 | in the current frame structure (it isn't set yet). */ |
| 1058 | framesize = find_proc_framesize (FRAME_SAVED_PC (get_next_frame (frame))); |
| 1059 | |
| 1060 | /* Now adjust our base frame accordingly. If we have a frame pointer |
| 1061 | use it, else subtract the size of this frame from the current |
| 1062 | frame. (we always want frame->frame to point at the lowest address |
| 1063 | in the frame). */ |
| 1064 | if (framesize == -1) |
| 1065 | frame->frame = TARGET_READ_FP (); |
| 1066 | else |
| 1067 | frame->frame -= framesize; |
| 1068 | return; |
| 1069 | } |
| 1070 | |
| 1071 | flags = read_register (FLAGS_REGNUM); |
| 1072 | if (flags & 2) /* In system call? */ |
| 1073 | frame->pc = read_register (31) & ~0x3; |
| 1074 | |
| 1075 | /* The outermost frame is always derived from PC-framesize |
| 1076 | |
| 1077 | One might think frameless innermost frames should have |
| 1078 | a frame->frame that is the same as the parent's frame->frame. |
| 1079 | That is wrong; frame->frame in that case should be the *high* |
| 1080 | address of the parent's frame. It's complicated as hell to |
| 1081 | explain, but the parent *always* creates some stack space for |
| 1082 | the child. So the child actually does have a frame of some |
| 1083 | sorts, and its base is the high address in its parent's frame. */ |
| 1084 | framesize = find_proc_framesize (frame->pc); |
| 1085 | if (framesize == -1) |
| 1086 | frame->frame = TARGET_READ_FP (); |
| 1087 | else |
| 1088 | frame->frame = read_register (SP_REGNUM) - framesize; |
| 1089 | } |
| 1090 | \f |
| 1091 | /* Given a GDB frame, determine the address of the calling function's frame. |
| 1092 | This will be used to create a new GDB frame struct, and then |
| 1093 | INIT_EXTRA_FRAME_INFO and INIT_FRAME_PC will be called for the new frame. |
| 1094 | |
| 1095 | This may involve searching through prologues for several functions |
| 1096 | at boundaries where GCC calls HP C code, or where code which has |
| 1097 | a frame pointer calls code without a frame pointer. */ |
| 1098 | |
| 1099 | CORE_ADDR |
| 1100 | frame_chain (frame) |
| 1101 | struct frame_info *frame; |
| 1102 | { |
| 1103 | int my_framesize, caller_framesize; |
| 1104 | struct unwind_table_entry *u; |
| 1105 | CORE_ADDR frame_base; |
| 1106 | struct frame_info *tmp_frame; |
| 1107 | |
| 1108 | /* A frame in the current frame list, or zero. */ |
| 1109 | struct frame_info *saved_regs_frame = 0; |
| 1110 | /* Where the registers were saved in saved_regs_frame. |
| 1111 | If saved_regs_frame is zero, this is garbage. */ |
| 1112 | struct frame_saved_regs saved_regs; |
| 1113 | |
| 1114 | CORE_ADDR caller_pc; |
| 1115 | |
| 1116 | struct minimal_symbol *min_frame_symbol; |
| 1117 | struct symbol *frame_symbol; |
| 1118 | char *frame_symbol_name; |
| 1119 | |
| 1120 | /* If this is a threaded application, and we see the |
| 1121 | routine "__pthread_exit", treat it as the stack root |
| 1122 | for this thread. */ |
| 1123 | min_frame_symbol = lookup_minimal_symbol_by_pc (frame->pc); |
| 1124 | frame_symbol = find_pc_function (frame->pc); |
| 1125 | |
| 1126 | if ((min_frame_symbol != 0) /* && (frame_symbol == 0) */ ) |
| 1127 | { |
| 1128 | /* The test above for "no user function name" would defend |
| 1129 | against the slim likelihood that a user might define a |
| 1130 | routine named "__pthread_exit" and then try to debug it. |
| 1131 | |
| 1132 | If it weren't commented out, and you tried to debug the |
| 1133 | pthread library itself, you'd get errors. |
| 1134 | |
| 1135 | So for today, we don't make that check. */ |
| 1136 | frame_symbol_name = SYMBOL_NAME (min_frame_symbol); |
| 1137 | if (frame_symbol_name != 0) |
| 1138 | { |
| 1139 | if (0 == strncmp (frame_symbol_name, |
| 1140 | THREAD_INITIAL_FRAME_SYMBOL, |
| 1141 | THREAD_INITIAL_FRAME_SYM_LEN)) |
| 1142 | { |
| 1143 | /* Pretend we've reached the bottom of the stack. */ |
| 1144 | return (CORE_ADDR) 0; |
| 1145 | } |
| 1146 | } |
| 1147 | } /* End of hacky code for threads. */ |
| 1148 | |
| 1149 | /* Handle HPUX, BSD, and OSF1 style interrupt frames first. These |
| 1150 | are easy; at *sp we have a full save state strucutre which we can |
| 1151 | pull the old stack pointer from. Also see frame_saved_pc for |
| 1152 | code to dig a saved PC out of the save state structure. */ |
| 1153 | if (pc_in_interrupt_handler (frame->pc)) |
| 1154 | frame_base = read_memory_integer (frame->frame + SP_REGNUM * 4, |
| 1155 | TARGET_PTR_BIT / 8); |
| 1156 | #ifdef FRAME_BASE_BEFORE_SIGTRAMP |
| 1157 | else if (frame->signal_handler_caller) |
| 1158 | { |
| 1159 | FRAME_BASE_BEFORE_SIGTRAMP (frame, &frame_base); |
| 1160 | } |
| 1161 | #endif |
| 1162 | else |
| 1163 | frame_base = frame->frame; |
| 1164 | |
| 1165 | /* Get frame sizes for the current frame and the frame of the |
| 1166 | caller. */ |
| 1167 | my_framesize = find_proc_framesize (frame->pc); |
| 1168 | caller_pc = FRAME_SAVED_PC (frame); |
| 1169 | |
| 1170 | /* If we can't determine the caller's PC, then it's not likely we can |
| 1171 | really determine anything meaningful about its frame. We'll consider |
| 1172 | this to be stack bottom. */ |
| 1173 | if (caller_pc == (CORE_ADDR) 0) |
| 1174 | return (CORE_ADDR) 0; |
| 1175 | |
| 1176 | caller_framesize = find_proc_framesize (FRAME_SAVED_PC (frame)); |
| 1177 | |
| 1178 | /* If caller does not have a frame pointer, then its frame |
| 1179 | can be found at current_frame - caller_framesize. */ |
| 1180 | if (caller_framesize != -1) |
| 1181 | { |
| 1182 | return frame_base - caller_framesize; |
| 1183 | } |
| 1184 | /* Both caller and callee have frame pointers and are GCC compiled |
| 1185 | (SAVE_SP bit in unwind descriptor is on for both functions. |
| 1186 | The previous frame pointer is found at the top of the current frame. */ |
| 1187 | if (caller_framesize == -1 && my_framesize == -1) |
| 1188 | { |
| 1189 | return read_memory_integer (frame_base, TARGET_PTR_BIT / 8); |
| 1190 | } |
| 1191 | /* Caller has a frame pointer, but callee does not. This is a little |
| 1192 | more difficult as GCC and HP C lay out locals and callee register save |
| 1193 | areas very differently. |
| 1194 | |
| 1195 | The previous frame pointer could be in a register, or in one of |
| 1196 | several areas on the stack. |
| 1197 | |
| 1198 | Walk from the current frame to the innermost frame examining |
| 1199 | unwind descriptors to determine if %r3 ever gets saved into the |
| 1200 | stack. If so return whatever value got saved into the stack. |
| 1201 | If it was never saved in the stack, then the value in %r3 is still |
| 1202 | valid, so use it. |
| 1203 | |
| 1204 | We use information from unwind descriptors to determine if %r3 |
| 1205 | is saved into the stack (Entry_GR field has this information). */ |
| 1206 | |
| 1207 | for (tmp_frame = frame; tmp_frame; tmp_frame = tmp_frame->next) |
| 1208 | { |
| 1209 | u = find_unwind_entry (tmp_frame->pc); |
| 1210 | |
| 1211 | if (!u) |
| 1212 | { |
| 1213 | /* We could find this information by examining prologues. I don't |
| 1214 | think anyone has actually written any tools (not even "strip") |
| 1215 | which leave them out of an executable, so maybe this is a moot |
| 1216 | point. */ |
| 1217 | /* ??rehrauer: Actually, it's quite possible to stepi your way into |
| 1218 | code that doesn't have unwind entries. For example, stepping into |
| 1219 | the dynamic linker will give you a PC that has none. Thus, I've |
| 1220 | disabled this warning. */ |
| 1221 | #if 0 |
| 1222 | warning ("Unable to find unwind for PC 0x%x -- Help!", tmp_frame->pc); |
| 1223 | #endif |
| 1224 | return (CORE_ADDR) 0; |
| 1225 | } |
| 1226 | |
| 1227 | if (u->Save_SP |
| 1228 | || tmp_frame->signal_handler_caller |
| 1229 | || pc_in_interrupt_handler (tmp_frame->pc)) |
| 1230 | break; |
| 1231 | |
| 1232 | /* Entry_GR specifies the number of callee-saved general registers |
| 1233 | saved in the stack. It starts at %r3, so %r3 would be 1. */ |
| 1234 | if (u->Entry_GR >= 1) |
| 1235 | { |
| 1236 | /* The unwind entry claims that r3 is saved here. However, |
| 1237 | in optimized code, GCC often doesn't actually save r3. |
| 1238 | We'll discover this if we look at the prologue. */ |
| 1239 | get_frame_saved_regs (tmp_frame, &saved_regs); |
| 1240 | saved_regs_frame = tmp_frame; |
| 1241 | |
| 1242 | /* If we have an address for r3, that's good. */ |
| 1243 | if (saved_regs.regs[FP_REGNUM]) |
| 1244 | break; |
| 1245 | } |
| 1246 | } |
| 1247 | |
| 1248 | if (tmp_frame) |
| 1249 | { |
| 1250 | /* We may have walked down the chain into a function with a frame |
| 1251 | pointer. */ |
| 1252 | if (u->Save_SP |
| 1253 | && !tmp_frame->signal_handler_caller |
| 1254 | && !pc_in_interrupt_handler (tmp_frame->pc)) |
| 1255 | { |
| 1256 | return read_memory_integer (tmp_frame->frame, TARGET_PTR_BIT / 8); |
| 1257 | } |
| 1258 | /* %r3 was saved somewhere in the stack. Dig it out. */ |
| 1259 | else |
| 1260 | { |
| 1261 | /* Sick. |
| 1262 | |
| 1263 | For optimization purposes many kernels don't have the |
| 1264 | callee saved registers into the save_state structure upon |
| 1265 | entry into the kernel for a syscall; the optimization |
| 1266 | is usually turned off if the process is being traced so |
| 1267 | that the debugger can get full register state for the |
| 1268 | process. |
| 1269 | |
| 1270 | This scheme works well except for two cases: |
| 1271 | |
| 1272 | * Attaching to a process when the process is in the |
| 1273 | kernel performing a system call (debugger can't get |
| 1274 | full register state for the inferior process since |
| 1275 | the process wasn't being traced when it entered the |
| 1276 | system call). |
| 1277 | |
| 1278 | * Register state is not complete if the system call |
| 1279 | causes the process to core dump. |
| 1280 | |
| 1281 | |
| 1282 | The following heinous code is an attempt to deal with |
| 1283 | the lack of register state in a core dump. It will |
| 1284 | fail miserably if the function which performs the |
| 1285 | system call has a variable sized stack frame. */ |
| 1286 | |
| 1287 | if (tmp_frame != saved_regs_frame) |
| 1288 | get_frame_saved_regs (tmp_frame, &saved_regs); |
| 1289 | |
| 1290 | /* Abominable hack. */ |
| 1291 | if (current_target.to_has_execution == 0 |
| 1292 | && ((saved_regs.regs[FLAGS_REGNUM] |
| 1293 | && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], |
| 1294 | TARGET_PTR_BIT / 8) |
| 1295 | & 0x2)) |
| 1296 | || (saved_regs.regs[FLAGS_REGNUM] == 0 |
| 1297 | && read_register (FLAGS_REGNUM) & 0x2))) |
| 1298 | { |
| 1299 | u = find_unwind_entry (FRAME_SAVED_PC (frame)); |
| 1300 | if (!u) |
| 1301 | { |
| 1302 | return read_memory_integer (saved_regs.regs[FP_REGNUM], |
| 1303 | TARGET_PTR_BIT / 8); |
| 1304 | } |
| 1305 | else |
| 1306 | { |
| 1307 | return frame_base - (u->Total_frame_size << 3); |
| 1308 | } |
| 1309 | } |
| 1310 | |
| 1311 | return read_memory_integer (saved_regs.regs[FP_REGNUM], |
| 1312 | TARGET_PTR_BIT / 8); |
| 1313 | } |
| 1314 | } |
| 1315 | else |
| 1316 | { |
| 1317 | /* Get the innermost frame. */ |
| 1318 | tmp_frame = frame; |
| 1319 | while (tmp_frame->next != NULL) |
| 1320 | tmp_frame = tmp_frame->next; |
| 1321 | |
| 1322 | if (tmp_frame != saved_regs_frame) |
| 1323 | get_frame_saved_regs (tmp_frame, &saved_regs); |
| 1324 | |
| 1325 | /* Abominable hack. See above. */ |
| 1326 | if (current_target.to_has_execution == 0 |
| 1327 | && ((saved_regs.regs[FLAGS_REGNUM] |
| 1328 | && (read_memory_integer (saved_regs.regs[FLAGS_REGNUM], |
| 1329 | TARGET_PTR_BIT / 8) |
| 1330 | & 0x2)) |
| 1331 | || (saved_regs.regs[FLAGS_REGNUM] == 0 |
| 1332 | && read_register (FLAGS_REGNUM) & 0x2))) |
| 1333 | { |
| 1334 | u = find_unwind_entry (FRAME_SAVED_PC (frame)); |
| 1335 | if (!u) |
| 1336 | { |
| 1337 | return read_memory_integer (saved_regs.regs[FP_REGNUM], |
| 1338 | TARGET_PTR_BIT / 8); |
| 1339 | } |
| 1340 | else |
| 1341 | { |
| 1342 | return frame_base - (u->Total_frame_size << 3); |
| 1343 | } |
| 1344 | } |
| 1345 | |
| 1346 | /* The value in %r3 was never saved into the stack (thus %r3 still |
| 1347 | holds the value of the previous frame pointer). */ |
| 1348 | return TARGET_READ_FP (); |
| 1349 | } |
| 1350 | } |
| 1351 | \f |
| 1352 | |
| 1353 | /* To see if a frame chain is valid, see if the caller looks like it |
| 1354 | was compiled with gcc. */ |
| 1355 | |
| 1356 | int |
| 1357 | hppa_frame_chain_valid (chain, thisframe) |
| 1358 | CORE_ADDR chain; |
| 1359 | struct frame_info *thisframe; |
| 1360 | { |
| 1361 | struct minimal_symbol *msym_us; |
| 1362 | struct minimal_symbol *msym_start; |
| 1363 | struct unwind_table_entry *u, *next_u = NULL; |
| 1364 | struct frame_info *next; |
| 1365 | |
| 1366 | if (!chain) |
| 1367 | return 0; |
| 1368 | |
| 1369 | u = find_unwind_entry (thisframe->pc); |
| 1370 | |
| 1371 | if (u == NULL) |
| 1372 | return 1; |
| 1373 | |
| 1374 | /* We can't just check that the same of msym_us is "_start", because |
| 1375 | someone idiotically decided that they were going to make a Ltext_end |
| 1376 | symbol with the same address. This Ltext_end symbol is totally |
| 1377 | indistinguishable (as nearly as I can tell) from the symbol for a function |
| 1378 | which is (legitimately, since it is in the user's namespace) |
| 1379 | named Ltext_end, so we can't just ignore it. */ |
| 1380 | msym_us = lookup_minimal_symbol_by_pc (FRAME_SAVED_PC (thisframe)); |
| 1381 | msym_start = lookup_minimal_symbol ("_start", NULL, NULL); |
| 1382 | if (msym_us |
| 1383 | && msym_start |
| 1384 | && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start)) |
| 1385 | return 0; |
| 1386 | |
| 1387 | /* Grrrr. Some new idiot decided that they don't want _start for the |
| 1388 | PRO configurations; $START$ calls main directly.... Deal with it. */ |
| 1389 | msym_start = lookup_minimal_symbol ("$START$", NULL, NULL); |
| 1390 | if (msym_us |
| 1391 | && msym_start |
| 1392 | && SYMBOL_VALUE_ADDRESS (msym_us) == SYMBOL_VALUE_ADDRESS (msym_start)) |
| 1393 | return 0; |
| 1394 | |
| 1395 | next = get_next_frame (thisframe); |
| 1396 | if (next) |
| 1397 | next_u = find_unwind_entry (next->pc); |
| 1398 | |
| 1399 | /* If this frame does not save SP, has no stack, isn't a stub, |
| 1400 | and doesn't "call" an interrupt routine or signal handler caller, |
| 1401 | then its not valid. */ |
| 1402 | if (u->Save_SP || u->Total_frame_size || u->stub_unwind.stub_type != 0 |
| 1403 | || (thisframe->next && thisframe->next->signal_handler_caller) |
| 1404 | || (next_u && next_u->HP_UX_interrupt_marker)) |
| 1405 | return 1; |
| 1406 | |
| 1407 | if (pc_in_linker_stub (thisframe->pc)) |
| 1408 | return 1; |
| 1409 | |
| 1410 | return 0; |
| 1411 | } |
| 1412 | |
| 1413 | /* |
| 1414 | These functions deal with saving and restoring register state |
| 1415 | around a function call in the inferior. They keep the stack |
| 1416 | double-word aligned; eventually, on an hp700, the stack will have |
| 1417 | to be aligned to a 64-byte boundary. */ |
| 1418 | |
| 1419 | void |
| 1420 | push_dummy_frame (inf_status) |
| 1421 | struct inferior_status *inf_status; |
| 1422 | { |
| 1423 | CORE_ADDR sp, pc, pcspace; |
| 1424 | register int regnum; |
| 1425 | CORE_ADDR int_buffer; |
| 1426 | double freg_buffer; |
| 1427 | |
| 1428 | /* Oh, what a hack. If we're trying to perform an inferior call |
| 1429 | while the inferior is asleep, we have to make sure to clear |
| 1430 | the "in system call" bit in the flag register (the call will |
| 1431 | start after the syscall returns, so we're no longer in the system |
| 1432 | call!) This state is kept in "inf_status", change it there. |
| 1433 | |
| 1434 | We also need a number of horrid hacks to deal with lossage in the |
| 1435 | PC queue registers (apparently they're not valid when the in syscall |
| 1436 | bit is set). */ |
| 1437 | pc = target_read_pc (inferior_pid); |
| 1438 | int_buffer = read_register (FLAGS_REGNUM); |
| 1439 | if (int_buffer & 0x2) |
| 1440 | { |
| 1441 | unsigned int sid; |
| 1442 | int_buffer &= ~0x2; |
| 1443 | write_inferior_status_register (inf_status, 0, int_buffer); |
| 1444 | write_inferior_status_register (inf_status, PCOQ_HEAD_REGNUM, pc + 0); |
| 1445 | write_inferior_status_register (inf_status, PCOQ_TAIL_REGNUM, pc + 4); |
| 1446 | sid = (pc >> 30) & 0x3; |
| 1447 | if (sid == 0) |
| 1448 | pcspace = read_register (SR4_REGNUM); |
| 1449 | else |
| 1450 | pcspace = read_register (SR4_REGNUM + 4 + sid); |
| 1451 | write_inferior_status_register (inf_status, PCSQ_HEAD_REGNUM, pcspace); |
| 1452 | write_inferior_status_register (inf_status, PCSQ_TAIL_REGNUM, pcspace); |
| 1453 | } |
| 1454 | else |
| 1455 | pcspace = read_register (PCSQ_HEAD_REGNUM); |
| 1456 | |
| 1457 | /* Space for "arguments"; the RP goes in here. */ |
| 1458 | sp = read_register (SP_REGNUM) + 48; |
| 1459 | int_buffer = read_register (RP_REGNUM) | 0x3; |
| 1460 | |
| 1461 | /* The 32bit and 64bit ABIs save the return pointer into different |
| 1462 | stack slots. */ |
| 1463 | if (REGISTER_SIZE == 8) |
| 1464 | write_memory (sp - 16, (char *) &int_buffer, REGISTER_SIZE); |
| 1465 | else |
| 1466 | write_memory (sp - 20, (char *) &int_buffer, REGISTER_SIZE); |
| 1467 | |
| 1468 | int_buffer = TARGET_READ_FP (); |
| 1469 | write_memory (sp, (char *) &int_buffer, REGISTER_SIZE); |
| 1470 | |
| 1471 | write_register (FP_REGNUM, sp); |
| 1472 | |
| 1473 | sp += 2 * REGISTER_SIZE; |
| 1474 | |
| 1475 | for (regnum = 1; regnum < 32; regnum++) |
| 1476 | if (regnum != RP_REGNUM && regnum != FP_REGNUM) |
| 1477 | sp = push_word (sp, read_register (regnum)); |
| 1478 | |
| 1479 | /* This is not necessary for the 64bit ABI. In fact it is dangerous. */ |
| 1480 | if (REGISTER_SIZE != 8) |
| 1481 | sp += 4; |
| 1482 | |
| 1483 | for (regnum = FP0_REGNUM; regnum < NUM_REGS; regnum++) |
| 1484 | { |
| 1485 | read_register_bytes (REGISTER_BYTE (regnum), (char *) &freg_buffer, 8); |
| 1486 | sp = push_bytes (sp, (char *) &freg_buffer, 8); |
| 1487 | } |
| 1488 | sp = push_word (sp, read_register (IPSW_REGNUM)); |
| 1489 | sp = push_word (sp, read_register (SAR_REGNUM)); |
| 1490 | sp = push_word (sp, pc); |
| 1491 | sp = push_word (sp, pcspace); |
| 1492 | sp = push_word (sp, pc + 4); |
| 1493 | sp = push_word (sp, pcspace); |
| 1494 | write_register (SP_REGNUM, sp); |
| 1495 | } |
| 1496 | |
| 1497 | static void |
| 1498 | find_dummy_frame_regs (frame, frame_saved_regs) |
| 1499 | struct frame_info *frame; |
| 1500 | struct frame_saved_regs *frame_saved_regs; |
| 1501 | { |
| 1502 | CORE_ADDR fp = frame->frame; |
| 1503 | int i; |
| 1504 | |
| 1505 | /* The 32bit and 64bit ABIs save RP into different locations. */ |
| 1506 | if (REGISTER_SIZE == 8) |
| 1507 | frame_saved_regs->regs[RP_REGNUM] = (fp - 16) & ~0x3; |
| 1508 | else |
| 1509 | frame_saved_regs->regs[RP_REGNUM] = (fp - 20) & ~0x3; |
| 1510 | |
| 1511 | frame_saved_regs->regs[FP_REGNUM] = fp; |
| 1512 | |
| 1513 | frame_saved_regs->regs[1] = fp + (2 * REGISTER_SIZE); |
| 1514 | |
| 1515 | for (fp += 3 * REGISTER_SIZE, i = 3; i < 32; i++) |
| 1516 | { |
| 1517 | if (i != FP_REGNUM) |
| 1518 | { |
| 1519 | frame_saved_regs->regs[i] = fp; |
| 1520 | fp += REGISTER_SIZE; |
| 1521 | } |
| 1522 | } |
| 1523 | |
| 1524 | /* This is not necessary or desirable for the 64bit ABI. */ |
| 1525 | if (REGISTER_SIZE != 8) |
| 1526 | fp += 4; |
| 1527 | |
| 1528 | for (i = FP0_REGNUM; i < NUM_REGS; i++, fp += 8) |
| 1529 | frame_saved_regs->regs[i] = fp; |
| 1530 | |
| 1531 | frame_saved_regs->regs[IPSW_REGNUM] = fp; |
| 1532 | frame_saved_regs->regs[SAR_REGNUM] = fp + REGISTER_SIZE; |
| 1533 | frame_saved_regs->regs[PCOQ_HEAD_REGNUM] = fp + 2 * REGISTER_SIZE; |
| 1534 | frame_saved_regs->regs[PCSQ_HEAD_REGNUM] = fp + 3 * REGISTER_SIZE; |
| 1535 | frame_saved_regs->regs[PCOQ_TAIL_REGNUM] = fp + 4 * REGISTER_SIZE; |
| 1536 | frame_saved_regs->regs[PCSQ_TAIL_REGNUM] = fp + 5 * REGISTER_SIZE; |
| 1537 | } |
| 1538 | |
| 1539 | void |
| 1540 | hppa_pop_frame () |
| 1541 | { |
| 1542 | register struct frame_info *frame = get_current_frame (); |
| 1543 | register CORE_ADDR fp, npc, target_pc; |
| 1544 | register int regnum; |
| 1545 | struct frame_saved_regs fsr; |
| 1546 | double freg_buffer; |
| 1547 | |
| 1548 | fp = FRAME_FP (frame); |
| 1549 | get_frame_saved_regs (frame, &fsr); |
| 1550 | |
| 1551 | #ifndef NO_PC_SPACE_QUEUE_RESTORE |
| 1552 | if (fsr.regs[IPSW_REGNUM]) /* Restoring a call dummy frame */ |
| 1553 | restore_pc_queue (&fsr); |
| 1554 | #endif |
| 1555 | |
| 1556 | for (regnum = 31; regnum > 0; regnum--) |
| 1557 | if (fsr.regs[regnum]) |
| 1558 | write_register (regnum, read_memory_integer (fsr.regs[regnum], |
| 1559 | REGISTER_SIZE)); |
| 1560 | |
| 1561 | for (regnum = NUM_REGS - 1; regnum >= FP0_REGNUM; regnum--) |
| 1562 | if (fsr.regs[regnum]) |
| 1563 | { |
| 1564 | read_memory (fsr.regs[regnum], (char *) &freg_buffer, 8); |
| 1565 | write_register_bytes (REGISTER_BYTE (regnum), (char *) &freg_buffer, 8); |
| 1566 | } |
| 1567 | |
| 1568 | if (fsr.regs[IPSW_REGNUM]) |
| 1569 | write_register (IPSW_REGNUM, |
| 1570 | read_memory_integer (fsr.regs[IPSW_REGNUM], |
| 1571 | REGISTER_SIZE)); |
| 1572 | |
| 1573 | if (fsr.regs[SAR_REGNUM]) |
| 1574 | write_register (SAR_REGNUM, |
| 1575 | read_memory_integer (fsr.regs[SAR_REGNUM], |
| 1576 | REGISTER_SIZE)); |
| 1577 | |
| 1578 | /* If the PC was explicitly saved, then just restore it. */ |
| 1579 | if (fsr.regs[PCOQ_TAIL_REGNUM]) |
| 1580 | { |
| 1581 | npc = read_memory_integer (fsr.regs[PCOQ_TAIL_REGNUM], |
| 1582 | REGISTER_SIZE); |
| 1583 | write_register (PCOQ_TAIL_REGNUM, npc); |
| 1584 | } |
| 1585 | /* Else use the value in %rp to set the new PC. */ |
| 1586 | else |
| 1587 | { |
| 1588 | npc = read_register (RP_REGNUM); |
| 1589 | write_pc (npc); |
| 1590 | } |
| 1591 | |
| 1592 | write_register (FP_REGNUM, read_memory_integer (fp, REGISTER_SIZE)); |
| 1593 | |
| 1594 | if (fsr.regs[IPSW_REGNUM]) /* call dummy */ |
| 1595 | write_register (SP_REGNUM, fp - 48); |
| 1596 | else |
| 1597 | write_register (SP_REGNUM, fp); |
| 1598 | |
| 1599 | /* The PC we just restored may be inside a return trampoline. If so |
| 1600 | we want to restart the inferior and run it through the trampoline. |
| 1601 | |
| 1602 | Do this by setting a momentary breakpoint at the location the |
| 1603 | trampoline returns to. |
| 1604 | |
| 1605 | Don't skip through the trampoline if we're popping a dummy frame. */ |
| 1606 | target_pc = SKIP_TRAMPOLINE_CODE (npc & ~0x3) & ~0x3; |
| 1607 | if (target_pc && !fsr.regs[IPSW_REGNUM]) |
| 1608 | { |
| 1609 | struct symtab_and_line sal; |
| 1610 | struct breakpoint *breakpoint; |
| 1611 | struct cleanup *old_chain; |
| 1612 | |
| 1613 | /* Set up our breakpoint. Set it to be silent as the MI code |
| 1614 | for "return_command" will print the frame we returned to. */ |
| 1615 | sal = find_pc_line (target_pc, 0); |
| 1616 | sal.pc = target_pc; |
| 1617 | breakpoint = set_momentary_breakpoint (sal, NULL, bp_finish); |
| 1618 | breakpoint->silent = 1; |
| 1619 | |
| 1620 | /* So we can clean things up. */ |
| 1621 | old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint); |
| 1622 | |
| 1623 | /* Start up the inferior. */ |
| 1624 | clear_proceed_status (); |
| 1625 | proceed_to_finish = 1; |
| 1626 | proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); |
| 1627 | |
| 1628 | /* Perform our cleanups. */ |
| 1629 | do_cleanups (old_chain); |
| 1630 | } |
| 1631 | flush_cached_frames (); |
| 1632 | } |
| 1633 | |
| 1634 | /* After returning to a dummy on the stack, restore the instruction |
| 1635 | queue space registers. */ |
| 1636 | |
| 1637 | static int |
| 1638 | restore_pc_queue (fsr) |
| 1639 | struct frame_saved_regs *fsr; |
| 1640 | { |
| 1641 | CORE_ADDR pc = read_pc (); |
| 1642 | CORE_ADDR new_pc = read_memory_integer (fsr->regs[PCOQ_HEAD_REGNUM], |
| 1643 | TARGET_PTR_BIT / 8); |
| 1644 | struct target_waitstatus w; |
| 1645 | int insn_count; |
| 1646 | |
| 1647 | /* Advance past break instruction in the call dummy. */ |
| 1648 | write_register (PCOQ_HEAD_REGNUM, pc + 4); |
| 1649 | write_register (PCOQ_TAIL_REGNUM, pc + 8); |
| 1650 | |
| 1651 | /* HPUX doesn't let us set the space registers or the space |
| 1652 | registers of the PC queue through ptrace. Boo, hiss. |
| 1653 | Conveniently, the call dummy has this sequence of instructions |
| 1654 | after the break: |
| 1655 | mtsp r21, sr0 |
| 1656 | ble,n 0(sr0, r22) |
| 1657 | |
| 1658 | So, load up the registers and single step until we are in the |
| 1659 | right place. */ |
| 1660 | |
| 1661 | write_register (21, read_memory_integer (fsr->regs[PCSQ_HEAD_REGNUM], |
| 1662 | REGISTER_SIZE)); |
| 1663 | write_register (22, new_pc); |
| 1664 | |
| 1665 | for (insn_count = 0; insn_count < 3; insn_count++) |
| 1666 | { |
| 1667 | /* FIXME: What if the inferior gets a signal right now? Want to |
| 1668 | merge this into wait_for_inferior (as a special kind of |
| 1669 | watchpoint? By setting a breakpoint at the end? Is there |
| 1670 | any other choice? Is there *any* way to do this stuff with |
| 1671 | ptrace() or some equivalent?). */ |
| 1672 | resume (1, 0); |
| 1673 | target_wait (inferior_pid, &w); |
| 1674 | |
| 1675 | if (w.kind == TARGET_WAITKIND_SIGNALLED) |
| 1676 | { |
| 1677 | stop_signal = w.value.sig; |
| 1678 | terminal_ours_for_output (); |
| 1679 | printf_unfiltered ("\nProgram terminated with signal %s, %s.\n", |
| 1680 | target_signal_to_name (stop_signal), |
| 1681 | target_signal_to_string (stop_signal)); |
| 1682 | gdb_flush (gdb_stdout); |
| 1683 | return 0; |
| 1684 | } |
| 1685 | } |
| 1686 | target_terminal_ours (); |
| 1687 | target_fetch_registers (-1); |
| 1688 | return 1; |
| 1689 | } |
| 1690 | |
| 1691 | |
| 1692 | #ifdef PA20W_CALLING_CONVENTIONS |
| 1693 | |
| 1694 | /* This function pushes a stack frame with arguments as part of the |
| 1695 | inferior function calling mechanism. |
| 1696 | |
| 1697 | This is the version for the PA64, in which later arguments appear |
| 1698 | at higher addresses. (The stack always grows towards higher |
| 1699 | addresses.) |
| 1700 | |
| 1701 | We simply allocate the appropriate amount of stack space and put |
| 1702 | arguments into their proper slots. The call dummy code will copy |
| 1703 | arguments into registers as needed by the ABI. |
| 1704 | |
| 1705 | This ABI also requires that the caller provide an argument pointer |
| 1706 | to the callee, so we do that too. */ |
| 1707 | |
| 1708 | CORE_ADDR |
| 1709 | hppa_push_arguments (nargs, args, sp, struct_return, struct_addr) |
| 1710 | int nargs; |
| 1711 | value_ptr *args; |
| 1712 | CORE_ADDR sp; |
| 1713 | int struct_return; |
| 1714 | CORE_ADDR struct_addr; |
| 1715 | { |
| 1716 | /* array of arguments' offsets */ |
| 1717 | int *offset = (int *) alloca (nargs * sizeof (int)); |
| 1718 | |
| 1719 | /* array of arguments' lengths: real lengths in bytes, not aligned to |
| 1720 | word size */ |
| 1721 | int *lengths = (int *) alloca (nargs * sizeof (int)); |
| 1722 | |
| 1723 | /* The value of SP as it was passed into this function after |
| 1724 | aligning. */ |
| 1725 | CORE_ADDR orig_sp = STACK_ALIGN (sp); |
| 1726 | |
| 1727 | /* The number of stack bytes occupied by the current argument. */ |
| 1728 | int bytes_reserved; |
| 1729 | |
| 1730 | /* The total number of bytes reserved for the arguments. */ |
| 1731 | int cum_bytes_reserved = 0; |
| 1732 | |
| 1733 | /* Similarly, but aligned. */ |
| 1734 | int cum_bytes_aligned = 0; |
| 1735 | int i; |
| 1736 | |
| 1737 | /* Iterate over each argument provided by the user. */ |
| 1738 | for (i = 0; i < nargs; i++) |
| 1739 | { |
| 1740 | struct type *arg_type = VALUE_TYPE (args[i]); |
| 1741 | |
| 1742 | /* Integral scalar values smaller than a register are padded on |
| 1743 | the left. We do this by promoting them to full-width, |
| 1744 | although the ABI says to pad them with garbage. */ |
| 1745 | if (is_integral_type (arg_type) |
| 1746 | && TYPE_LENGTH (arg_type) < REGISTER_SIZE) |
| 1747 | { |
| 1748 | args[i] = value_cast ((TYPE_UNSIGNED (arg_type) |
| 1749 | ? builtin_type_unsigned_long |
| 1750 | : builtin_type_long), |
| 1751 | args[i]); |
| 1752 | arg_type = VALUE_TYPE (args[i]); |
| 1753 | } |
| 1754 | |
| 1755 | lengths[i] = TYPE_LENGTH (arg_type); |
| 1756 | |
| 1757 | /* Align the size of the argument to the word size for this |
| 1758 | target. */ |
| 1759 | bytes_reserved = (lengths[i] + REGISTER_SIZE - 1) & -REGISTER_SIZE; |
| 1760 | |
| 1761 | offset[i] = cum_bytes_reserved; |
| 1762 | |
| 1763 | /* Aggregates larger than eight bytes (the only types larger |
| 1764 | than eight bytes we have) are aligned on a 16-byte boundary, |
| 1765 | possibly padded on the right with garbage. This may leave an |
| 1766 | empty word on the stack, and thus an unused register, as per |
| 1767 | the ABI. */ |
| 1768 | if (bytes_reserved > 8) |
| 1769 | { |
| 1770 | /* Round up the offset to a multiple of two slots. */ |
| 1771 | int new_offset = ((offset[i] + 2*REGISTER_SIZE-1) |
| 1772 | & -(2*REGISTER_SIZE)); |
| 1773 | |
| 1774 | /* Note the space we've wasted, if any. */ |
| 1775 | bytes_reserved += new_offset - offset[i]; |
| 1776 | offset[i] = new_offset; |
| 1777 | } |
| 1778 | |
| 1779 | cum_bytes_reserved += bytes_reserved; |
| 1780 | } |
| 1781 | |
| 1782 | /* CUM_BYTES_RESERVED already accounts for all the arguments |
| 1783 | passed by the user. However, the ABIs mandate minimum stack space |
| 1784 | allocations for outgoing arguments. |
| 1785 | |
| 1786 | The ABIs also mandate minimum stack alignments which we must |
| 1787 | preserve. */ |
| 1788 | cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved); |
| 1789 | sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE); |
| 1790 | |
| 1791 | /* Now write each of the args at the proper offset down the stack. */ |
| 1792 | for (i = 0; i < nargs; i++) |
| 1793 | write_memory (orig_sp + offset[i], VALUE_CONTENTS (args[i]), lengths[i]); |
| 1794 | |
| 1795 | /* If a structure has to be returned, set up register 28 to hold its |
| 1796 | address */ |
| 1797 | if (struct_return) |
| 1798 | write_register (28, struct_addr); |
| 1799 | |
| 1800 | /* For the PA64 we must pass a pointer to the outgoing argument list. |
| 1801 | The ABI mandates that the pointer should point to the first byte of |
| 1802 | storage beyond the register flushback area. |
| 1803 | |
| 1804 | However, the call dummy expects the outgoing argument pointer to |
| 1805 | be passed in register %r4. */ |
| 1806 | write_register (4, orig_sp + REG_PARM_STACK_SPACE); |
| 1807 | |
| 1808 | /* ?!? This needs further work. We need to set up the global data |
| 1809 | pointer for this procedure. This assumes the same global pointer |
| 1810 | for every procedure. The call dummy expects the dp value to |
| 1811 | be passed in register %r6. */ |
| 1812 | write_register (6, read_register (27)); |
| 1813 | |
| 1814 | /* The stack will have 64 bytes of additional space for a frame marker. */ |
| 1815 | return sp + 64; |
| 1816 | } |
| 1817 | |
| 1818 | #else |
| 1819 | |
| 1820 | /* This function pushes a stack frame with arguments as part of the |
| 1821 | inferior function calling mechanism. |
| 1822 | |
| 1823 | This is the version of the function for the 32-bit PA machines, in |
| 1824 | which later arguments appear at lower addresses. (The stack always |
| 1825 | grows towards higher addresses.) |
| 1826 | |
| 1827 | We simply allocate the appropriate amount of stack space and put |
| 1828 | arguments into their proper slots. The call dummy code will copy |
| 1829 | arguments into registers as needed by the ABI. */ |
| 1830 | |
| 1831 | CORE_ADDR |
| 1832 | hppa_push_arguments (nargs, args, sp, struct_return, struct_addr) |
| 1833 | int nargs; |
| 1834 | value_ptr *args; |
| 1835 | CORE_ADDR sp; |
| 1836 | int struct_return; |
| 1837 | CORE_ADDR struct_addr; |
| 1838 | { |
| 1839 | /* array of arguments' offsets */ |
| 1840 | int *offset = (int *) alloca (nargs * sizeof (int)); |
| 1841 | |
| 1842 | /* array of arguments' lengths: real lengths in bytes, not aligned to |
| 1843 | word size */ |
| 1844 | int *lengths = (int *) alloca (nargs * sizeof (int)); |
| 1845 | |
| 1846 | /* The number of stack bytes occupied by the current argument. */ |
| 1847 | int bytes_reserved; |
| 1848 | |
| 1849 | /* The total number of bytes reserved for the arguments. */ |
| 1850 | int cum_bytes_reserved = 0; |
| 1851 | |
| 1852 | /* Similarly, but aligned. */ |
| 1853 | int cum_bytes_aligned = 0; |
| 1854 | int i; |
| 1855 | |
| 1856 | /* Iterate over each argument provided by the user. */ |
| 1857 | for (i = 0; i < nargs; i++) |
| 1858 | { |
| 1859 | lengths[i] = TYPE_LENGTH (VALUE_TYPE (args[i])); |
| 1860 | |
| 1861 | /* Align the size of the argument to the word size for this |
| 1862 | target. */ |
| 1863 | bytes_reserved = (lengths[i] + REGISTER_SIZE - 1) & -REGISTER_SIZE; |
| 1864 | |
| 1865 | offset[i] = cum_bytes_reserved + lengths[i]; |
| 1866 | |
| 1867 | /* If the argument is a double word argument, then it needs to be |
| 1868 | double word aligned. */ |
| 1869 | if ((bytes_reserved == 2 * REGISTER_SIZE) |
| 1870 | && (offset[i] % 2 * REGISTER_SIZE)) |
| 1871 | { |
| 1872 | int new_offset = 0; |
| 1873 | /* BYTES_RESERVED is already aligned to the word, so we put |
| 1874 | the argument at one word more down the stack. |
| 1875 | |
| 1876 | This will leave one empty word on the stack, and one unused |
| 1877 | register as mandated by the ABI. */ |
| 1878 | new_offset = ((offset[i] + 2 * REGISTER_SIZE - 1) |
| 1879 | & -(2 * REGISTER_SIZE)); |
| 1880 | |
| 1881 | if ((new_offset - offset[i]) >= 2 * REGISTER_SIZE) |
| 1882 | { |
| 1883 | bytes_reserved += REGISTER_SIZE; |
| 1884 | offset[i] += REGISTER_SIZE; |
| 1885 | } |
| 1886 | } |
| 1887 | |
| 1888 | cum_bytes_reserved += bytes_reserved; |
| 1889 | |
| 1890 | } |
| 1891 | |
| 1892 | /* CUM_BYTES_RESERVED already accounts for all the arguments passed |
| 1893 | by the user. However, the ABI mandates minimum stack space |
| 1894 | allocations for outgoing arguments. |
| 1895 | |
| 1896 | The ABI also mandates minimum stack alignments which we must |
| 1897 | preserve. */ |
| 1898 | cum_bytes_aligned = STACK_ALIGN (cum_bytes_reserved); |
| 1899 | sp += max (cum_bytes_aligned, REG_PARM_STACK_SPACE); |
| 1900 | |
| 1901 | /* Now write each of the args at the proper offset down the stack. |
| 1902 | ?!? We need to promote values to a full register instead of skipping |
| 1903 | words in the stack. */ |
| 1904 | for (i = 0; i < nargs; i++) |
| 1905 | write_memory (sp - offset[i], VALUE_CONTENTS (args[i]), lengths[i]); |
| 1906 | |
| 1907 | /* If a structure has to be returned, set up register 28 to hold its |
| 1908 | address */ |
| 1909 | if (struct_return) |
| 1910 | write_register (28, struct_addr); |
| 1911 | |
| 1912 | /* The stack will have 32 bytes of additional space for a frame marker. */ |
| 1913 | return sp + 32; |
| 1914 | } |
| 1915 | |
| 1916 | #endif |
| 1917 | |
| 1918 | /* elz: this function returns a value which is built looking at the given address. |
| 1919 | It is called from call_function_by_hand, in case we need to return a |
| 1920 | value which is larger than 64 bits, and it is stored in the stack rather than |
| 1921 | in the registers r28 and r29 or fr4. |
| 1922 | This function does the same stuff as value_being_returned in values.c, but |
| 1923 | gets the value from the stack rather than from the buffer where all the |
| 1924 | registers were saved when the function called completed. */ |
| 1925 | value_ptr |
| 1926 | hppa_value_returned_from_stack (valtype, addr) |
| 1927 | register struct type *valtype; |
| 1928 | CORE_ADDR addr; |
| 1929 | { |
| 1930 | register value_ptr val; |
| 1931 | |
| 1932 | val = allocate_value (valtype); |
| 1933 | CHECK_TYPEDEF (valtype); |
| 1934 | target_read_memory (addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (valtype)); |
| 1935 | |
| 1936 | return val; |
| 1937 | } |
| 1938 | |
| 1939 | |
| 1940 | |
| 1941 | /* elz: Used to lookup a symbol in the shared libraries. |
| 1942 | This function calls shl_findsym, indirectly through a |
| 1943 | call to __d_shl_get. __d_shl_get is in end.c, which is always |
| 1944 | linked in by the hp compilers/linkers. |
| 1945 | The call to shl_findsym cannot be made directly because it needs |
| 1946 | to be active in target address space. |
| 1947 | inputs: - minimal symbol pointer for the function we want to look up |
| 1948 | - address in target space of the descriptor for the library |
| 1949 | where we want to look the symbol up. |
| 1950 | This address is retrieved using the |
| 1951 | som_solib_get_solib_by_pc function (somsolib.c). |
| 1952 | output: - real address in the library of the function. |
| 1953 | note: the handle can be null, in which case shl_findsym will look for |
| 1954 | the symbol in all the loaded shared libraries. |
| 1955 | files to look at if you need reference on this stuff: |
| 1956 | dld.c, dld_shl_findsym.c |
| 1957 | end.c |
| 1958 | man entry for shl_findsym */ |
| 1959 | |
| 1960 | CORE_ADDR |
| 1961 | find_stub_with_shl_get (function, handle) |
| 1962 | struct minimal_symbol *function; |
| 1963 | CORE_ADDR handle; |
| 1964 | { |
| 1965 | struct symbol *get_sym, *symbol2; |
| 1966 | struct minimal_symbol *buff_minsym, *msymbol; |
| 1967 | struct type *ftype; |
| 1968 | value_ptr *args; |
| 1969 | value_ptr funcval, val; |
| 1970 | |
| 1971 | int x, namelen, err_value, tmp = -1; |
| 1972 | CORE_ADDR endo_buff_addr, value_return_addr, errno_return_addr; |
| 1973 | CORE_ADDR stub_addr; |
| 1974 | |
| 1975 | |
| 1976 | args = (value_ptr *) alloca (sizeof (value_ptr) * 8); /* 6 for the arguments and one null one??? */ |
| 1977 | funcval = find_function_in_inferior ("__d_shl_get"); |
| 1978 | get_sym = lookup_symbol ("__d_shl_get", NULL, VAR_NAMESPACE, NULL, NULL); |
| 1979 | buff_minsym = lookup_minimal_symbol ("__buffer", NULL, NULL); |
| 1980 | msymbol = lookup_minimal_symbol ("__shldp", NULL, NULL); |
| 1981 | symbol2 = lookup_symbol ("__shldp", NULL, VAR_NAMESPACE, NULL, NULL); |
| 1982 | endo_buff_addr = SYMBOL_VALUE_ADDRESS (buff_minsym); |
| 1983 | namelen = strlen (SYMBOL_NAME (function)); |
| 1984 | value_return_addr = endo_buff_addr + namelen; |
| 1985 | ftype = check_typedef (SYMBOL_TYPE (get_sym)); |
| 1986 | |
| 1987 | /* do alignment */ |
| 1988 | if ((x = value_return_addr % 64) != 0) |
| 1989 | value_return_addr = value_return_addr + 64 - x; |
| 1990 | |
| 1991 | errno_return_addr = value_return_addr + 64; |
| 1992 | |
| 1993 | |
| 1994 | /* set up stuff needed by __d_shl_get in buffer in end.o */ |
| 1995 | |
| 1996 | target_write_memory (endo_buff_addr, SYMBOL_NAME (function), namelen); |
| 1997 | |
| 1998 | target_write_memory (value_return_addr, (char *) &tmp, 4); |
| 1999 | |
| 2000 | target_write_memory (errno_return_addr, (char *) &tmp, 4); |
| 2001 | |
| 2002 | target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), |
| 2003 | (char *) &handle, 4); |
| 2004 | |
| 2005 | /* now prepare the arguments for the call */ |
| 2006 | |
| 2007 | args[0] = value_from_longest (TYPE_FIELD_TYPE (ftype, 0), 12); |
| 2008 | args[1] = value_from_longest (TYPE_FIELD_TYPE (ftype, 1), SYMBOL_VALUE_ADDRESS (msymbol)); |
| 2009 | args[2] = value_from_longest (TYPE_FIELD_TYPE (ftype, 2), endo_buff_addr); |
| 2010 | args[3] = value_from_longest (TYPE_FIELD_TYPE (ftype, 3), TYPE_PROCEDURE); |
| 2011 | args[4] = value_from_longest (TYPE_FIELD_TYPE (ftype, 4), value_return_addr); |
| 2012 | args[5] = value_from_longest (TYPE_FIELD_TYPE (ftype, 5), errno_return_addr); |
| 2013 | |
| 2014 | /* now call the function */ |
| 2015 | |
| 2016 | val = call_function_by_hand (funcval, 6, args); |
| 2017 | |
| 2018 | /* now get the results */ |
| 2019 | |
| 2020 | target_read_memory (errno_return_addr, (char *) &err_value, sizeof (err_value)); |
| 2021 | |
| 2022 | target_read_memory (value_return_addr, (char *) &stub_addr, sizeof (stub_addr)); |
| 2023 | if (stub_addr <= 0) |
| 2024 | error ("call to __d_shl_get failed, error code is %d", err_value); |
| 2025 | |
| 2026 | return (stub_addr); |
| 2027 | } |
| 2028 | |
| 2029 | /* Cover routine for find_stub_with_shl_get to pass to catch_errors */ |
| 2030 | static int |
| 2031 | cover_find_stub_with_shl_get (PTR args_untyped) |
| 2032 | { |
| 2033 | args_for_find_stub *args = args_untyped; |
| 2034 | args->return_val = find_stub_with_shl_get (args->msym, args->solib_handle); |
| 2035 | return 0; |
| 2036 | } |
| 2037 | |
| 2038 | /* Insert the specified number of args and function address |
| 2039 | into a call sequence of the above form stored at DUMMYNAME. |
| 2040 | |
| 2041 | On the hppa we need to call the stack dummy through $$dyncall. |
| 2042 | Therefore our version of FIX_CALL_DUMMY takes an extra argument, |
| 2043 | real_pc, which is the location where gdb should start up the |
| 2044 | inferior to do the function call. |
| 2045 | |
| 2046 | This has to work across several versions of hpux, bsd, osf1. It has to |
| 2047 | work regardless of what compiler was used to build the inferior program. |
| 2048 | It should work regardless of whether or not end.o is available. It has |
| 2049 | to work even if gdb can not call into the dynamic loader in the inferior |
| 2050 | to query it for symbol names and addresses. |
| 2051 | |
| 2052 | Yes, all those cases should work. Luckily code exists to handle most |
| 2053 | of them. The complexity is in selecting exactly what scheme should |
| 2054 | be used to perform the inferior call. |
| 2055 | |
| 2056 | At the current time this routine is known not to handle cases where |
| 2057 | the program was linked with HP's compiler without including end.o. |
| 2058 | |
| 2059 | Please contact Jeff Law (law@cygnus.com) before changing this code. */ |
| 2060 | |
| 2061 | CORE_ADDR |
| 2062 | hppa_fix_call_dummy (dummy, pc, fun, nargs, args, type, gcc_p) |
| 2063 | char *dummy; |
| 2064 | CORE_ADDR pc; |
| 2065 | CORE_ADDR fun; |
| 2066 | int nargs; |
| 2067 | value_ptr *args; |
| 2068 | struct type *type; |
| 2069 | int gcc_p; |
| 2070 | { |
| 2071 | CORE_ADDR dyncall_addr; |
| 2072 | struct minimal_symbol *msymbol; |
| 2073 | struct minimal_symbol *trampoline; |
| 2074 | int flags = read_register (FLAGS_REGNUM); |
| 2075 | struct unwind_table_entry *u = NULL; |
| 2076 | CORE_ADDR new_stub = 0; |
| 2077 | CORE_ADDR solib_handle = 0; |
| 2078 | |
| 2079 | /* Nonzero if we will use GCC's PLT call routine. This routine must be |
| 2080 | passed an import stub, not a PLABEL. It is also necessary to set %r19 |
| 2081 | (the PIC register) before performing the call. |
| 2082 | |
| 2083 | If zero, then we are using __d_plt_call (HP's PLT call routine) or we |
| 2084 | are calling the target directly. When using __d_plt_call we want to |
| 2085 | use a PLABEL instead of an import stub. */ |
| 2086 | int using_gcc_plt_call = 1; |
| 2087 | |
| 2088 | #ifdef GDB_TARGET_IS_HPPA_20W |
| 2089 | /* We currently use completely different code for the PA2.0W inferior |
| 2090 | function call sequences. This needs to be cleaned up. */ |
| 2091 | { |
| 2092 | CORE_ADDR pcsqh, pcsqt, pcoqh, pcoqt, sr5; |
| 2093 | struct target_waitstatus w; |
| 2094 | int inst1, inst2; |
| 2095 | char buf[4]; |
| 2096 | int status; |
| 2097 | struct objfile *objfile; |
| 2098 | |
| 2099 | /* We can not modify the PC space queues directly, so we start |
| 2100 | up the inferior and execute a couple instructions to set the |
| 2101 | space queues so that they point to the call dummy in the stack. */ |
| 2102 | pcsqh = read_register (PCSQ_HEAD_REGNUM); |
| 2103 | sr5 = read_register (SR5_REGNUM); |
| 2104 | if (1) |
| 2105 | { |
| 2106 | pcoqh = read_register (PCOQ_HEAD_REGNUM); |
| 2107 | pcoqt = read_register (PCOQ_TAIL_REGNUM); |
| 2108 | if (target_read_memory (pcoqh, buf, 4) != 0) |
| 2109 | error ("Couldn't modify space queue\n"); |
| 2110 | inst1 = extract_unsigned_integer (buf, 4); |
| 2111 | |
| 2112 | if (target_read_memory (pcoqt, buf, 4) != 0) |
| 2113 | error ("Couldn't modify space queue\n"); |
| 2114 | inst2 = extract_unsigned_integer (buf, 4); |
| 2115 | |
| 2116 | /* BVE (r1) */ |
| 2117 | *((int *) buf) = 0xe820d000; |
| 2118 | if (target_write_memory (pcoqh, buf, 4) != 0) |
| 2119 | error ("Couldn't modify space queue\n"); |
| 2120 | |
| 2121 | /* NOP */ |
| 2122 | *((int *) buf) = 0x08000240; |
| 2123 | if (target_write_memory (pcoqt, buf, 4) != 0) |
| 2124 | { |
| 2125 | *((int *) buf) = inst1; |
| 2126 | target_write_memory (pcoqh, buf, 4); |
| 2127 | error ("Couldn't modify space queue\n"); |
| 2128 | } |
| 2129 | |
| 2130 | write_register (1, pc); |
| 2131 | |
| 2132 | /* Single step twice, the BVE instruction will set the space queue |
| 2133 | such that it points to the PC value written immediately above |
| 2134 | (ie the call dummy). */ |
| 2135 | resume (1, 0); |
| 2136 | target_wait (inferior_pid, &w); |
| 2137 | resume (1, 0); |
| 2138 | target_wait (inferior_pid, &w); |
| 2139 | |
| 2140 | /* Restore the two instructions at the old PC locations. */ |
| 2141 | *((int *) buf) = inst1; |
| 2142 | target_write_memory (pcoqh, buf, 4); |
| 2143 | *((int *) buf) = inst2; |
| 2144 | target_write_memory (pcoqt, buf, 4); |
| 2145 | } |
| 2146 | |
| 2147 | /* The call dummy wants the ultimate destination address initially |
| 2148 | in register %r5. */ |
| 2149 | write_register (5, fun); |
| 2150 | |
| 2151 | /* We need to see if this objfile has a different DP value than our |
| 2152 | own (it could be a shared library for example). */ |
| 2153 | ALL_OBJFILES (objfile) |
| 2154 | { |
| 2155 | struct obj_section *s; |
| 2156 | obj_private_data_t *obj_private; |
| 2157 | |
| 2158 | /* See if FUN is in any section within this shared library. */ |
| 2159 | for (s = objfile->sections; s < objfile->sections_end; s++) |
| 2160 | if (s->addr <= fun && fun < s->endaddr) |
| 2161 | break; |
| 2162 | |
| 2163 | if (s >= objfile->sections_end) |
| 2164 | continue; |
| 2165 | |
| 2166 | obj_private = (obj_private_data_t *) objfile->obj_private; |
| 2167 | |
| 2168 | /* The DP value may be different for each objfile. But within an |
| 2169 | objfile each function uses the same dp value. Thus we do not need |
| 2170 | to grope around the opd section looking for dp values. |
| 2171 | |
| 2172 | ?!? This is not strictly correct since we may be in a shared library |
| 2173 | and want to call back into the main program. To make that case |
| 2174 | work correctly we need to set obj_private->dp for the main program's |
| 2175 | objfile, then remove this conditional. */ |
| 2176 | if (obj_private->dp) |
| 2177 | write_register (27, obj_private->dp); |
| 2178 | break; |
| 2179 | } |
| 2180 | return pc; |
| 2181 | } |
| 2182 | #endif |
| 2183 | |
| 2184 | #ifndef GDB_TARGET_IS_HPPA_20W |
| 2185 | /* Prefer __gcc_plt_call over the HP supplied routine because |
| 2186 | __gcc_plt_call works for any number of arguments. */ |
| 2187 | trampoline = NULL; |
| 2188 | if (lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL) == NULL) |
| 2189 | using_gcc_plt_call = 0; |
| 2190 | |
| 2191 | msymbol = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| 2192 | if (msymbol == NULL) |
| 2193 | error ("Can't find an address for $$dyncall trampoline"); |
| 2194 | |
| 2195 | dyncall_addr = SYMBOL_VALUE_ADDRESS (msymbol); |
| 2196 | |
| 2197 | /* FUN could be a procedure label, in which case we have to get |
| 2198 | its real address and the value of its GOT/DP if we plan to |
| 2199 | call the routine via gcc_plt_call. */ |
| 2200 | if ((fun & 0x2) && using_gcc_plt_call) |
| 2201 | { |
| 2202 | /* Get the GOT/DP value for the target function. It's |
| 2203 | at *(fun+4). Note the call dummy is *NOT* allowed to |
| 2204 | trash %r19 before calling the target function. */ |
| 2205 | write_register (19, read_memory_integer ((fun & ~0x3) + 4, |
| 2206 | REGISTER_SIZE)); |
| 2207 | |
| 2208 | /* Now get the real address for the function we are calling, it's |
| 2209 | at *fun. */ |
| 2210 | fun = (CORE_ADDR) read_memory_integer (fun & ~0x3, |
| 2211 | TARGET_PTR_BIT / 8); |
| 2212 | } |
| 2213 | else |
| 2214 | { |
| 2215 | |
| 2216 | #ifndef GDB_TARGET_IS_PA_ELF |
| 2217 | /* FUN could be an export stub, the real address of a function, or |
| 2218 | a PLABEL. When using gcc's PLT call routine we must call an import |
| 2219 | stub rather than the export stub or real function for lazy binding |
| 2220 | to work correctly |
| 2221 | |
| 2222 | /* If we are using the gcc PLT call routine, then we need to |
| 2223 | get the import stub for the target function. */ |
| 2224 | if (using_gcc_plt_call && som_solib_get_got_by_pc (fun)) |
| 2225 | { |
| 2226 | struct objfile *objfile; |
| 2227 | struct minimal_symbol *funsymbol, *stub_symbol; |
| 2228 | CORE_ADDR newfun = 0; |
| 2229 | |
| 2230 | funsymbol = lookup_minimal_symbol_by_pc (fun); |
| 2231 | if (!funsymbol) |
| 2232 | error ("Unable to find minimal symbol for target function.\n"); |
| 2233 | |
| 2234 | /* Search all the object files for an import symbol with the |
| 2235 | right name. */ |
| 2236 | ALL_OBJFILES (objfile) |
| 2237 | { |
| 2238 | stub_symbol |
| 2239 | = lookup_minimal_symbol_solib_trampoline |
| 2240 | (SYMBOL_NAME (funsymbol), NULL, objfile); |
| 2241 | |
| 2242 | if (!stub_symbol) |
| 2243 | stub_symbol = lookup_minimal_symbol (SYMBOL_NAME (funsymbol), |
| 2244 | NULL, objfile); |
| 2245 | |
| 2246 | /* Found a symbol with the right name. */ |
| 2247 | if (stub_symbol) |
| 2248 | { |
| 2249 | struct unwind_table_entry *u; |
| 2250 | /* It must be a shared library trampoline. */ |
| 2251 | if (MSYMBOL_TYPE (stub_symbol) != mst_solib_trampoline) |
| 2252 | continue; |
| 2253 | |
| 2254 | /* It must also be an import stub. */ |
| 2255 | u = find_unwind_entry (SYMBOL_VALUE (stub_symbol)); |
| 2256 | if (u == NULL |
| 2257 | || (u->stub_unwind.stub_type != IMPORT |
| 2258 | #ifdef GDB_NATIVE_HPUX_11 |
| 2259 | /* Sigh. The hpux 10.20 dynamic linker will blow |
| 2260 | chunks if we perform a call to an unbound function |
| 2261 | via the IMPORT_SHLIB stub. The hpux 11.00 dynamic |
| 2262 | linker will blow chunks if we do not call the |
| 2263 | unbound function via the IMPORT_SHLIB stub. |
| 2264 | |
| 2265 | We currently have no way to select bevahior on just |
| 2266 | the target. However, we only support HPUX/SOM in |
| 2267 | native mode. So we conditinalize on a native |
| 2268 | #ifdef. Ugly. Ugly. Ugly */ |
| 2269 | && u->stub_unwind.stub_type != IMPORT_SHLIB |
| 2270 | #endif |
| 2271 | )) |
| 2272 | continue; |
| 2273 | |
| 2274 | /* OK. Looks like the correct import stub. */ |
| 2275 | newfun = SYMBOL_VALUE (stub_symbol); |
| 2276 | fun = newfun; |
| 2277 | |
| 2278 | /* If we found an IMPORT stub, then we want to stop |
| 2279 | searching now. If we found an IMPORT_SHLIB, we want |
| 2280 | to continue the search in the hopes that we will find |
| 2281 | an IMPORT stub. */ |
| 2282 | if (u->stub_unwind.stub_type == IMPORT) |
| 2283 | break; |
| 2284 | } |
| 2285 | } |
| 2286 | |
| 2287 | /* Ouch. We did not find an import stub. Make an attempt to |
| 2288 | do the right thing instead of just croaking. Most of the |
| 2289 | time this will actually work. */ |
| 2290 | if (newfun == 0) |
| 2291 | write_register (19, som_solib_get_got_by_pc (fun)); |
| 2292 | |
| 2293 | u = find_unwind_entry (fun); |
| 2294 | if (u |
| 2295 | && (u->stub_unwind.stub_type == IMPORT |
| 2296 | || u->stub_unwind.stub_type == IMPORT_SHLIB)) |
| 2297 | trampoline = lookup_minimal_symbol ("__gcc_plt_call", NULL, NULL); |
| 2298 | |
| 2299 | /* If we found the import stub in the shared library, then we have |
| 2300 | to set %r19 before we call the stub. */ |
| 2301 | if (u && u->stub_unwind.stub_type == IMPORT_SHLIB) |
| 2302 | write_register (19, som_solib_get_got_by_pc (fun)); |
| 2303 | } |
| 2304 | #endif |
| 2305 | } |
| 2306 | |
| 2307 | /* If we are calling into another load module then have sr4export call the |
| 2308 | magic __d_plt_call routine which is linked in from end.o. |
| 2309 | |
| 2310 | You can't use _sr4export to make the call as the value in sp-24 will get |
| 2311 | fried and you end up returning to the wrong location. You can't call the |
| 2312 | target as the code to bind the PLT entry to a function can't return to a |
| 2313 | stack address. |
| 2314 | |
| 2315 | Also, query the dynamic linker in the inferior to provide a suitable |
| 2316 | PLABEL for the target function. */ |
| 2317 | if (!using_gcc_plt_call) |
| 2318 | { |
| 2319 | CORE_ADDR new_fun; |
| 2320 | |
| 2321 | /* Get a handle for the shared library containing FUN. Given the |
| 2322 | handle we can query the shared library for a PLABEL. */ |
| 2323 | solib_handle = som_solib_get_solib_by_pc (fun); |
| 2324 | |
| 2325 | if (solib_handle) |
| 2326 | { |
| 2327 | struct minimal_symbol *fmsymbol = lookup_minimal_symbol_by_pc (fun); |
| 2328 | |
| 2329 | trampoline = lookup_minimal_symbol ("__d_plt_call", NULL, NULL); |
| 2330 | |
| 2331 | if (trampoline == NULL) |
| 2332 | { |
| 2333 | error ("Can't find an address for __d_plt_call or __gcc_plt_call trampoline\nSuggest linking executable with -g or compiling with gcc."); |
| 2334 | } |
| 2335 | |
| 2336 | /* This is where sr4export will jump to. */ |
| 2337 | new_fun = SYMBOL_VALUE_ADDRESS (trampoline); |
| 2338 | |
| 2339 | /* If the function is in a shared library, then call __d_shl_get to |
| 2340 | get a PLABEL for the target function. */ |
| 2341 | new_stub = find_stub_with_shl_get (fmsymbol, solib_handle); |
| 2342 | |
| 2343 | if (new_stub == 0) |
| 2344 | error ("Can't find an import stub for %s", SYMBOL_NAME (fmsymbol)); |
| 2345 | |
| 2346 | /* We have to store the address of the stub in __shlib_funcptr. */ |
| 2347 | msymbol = lookup_minimal_symbol ("__shlib_funcptr", NULL, |
| 2348 | (struct objfile *) NULL); |
| 2349 | |
| 2350 | if (msymbol == NULL) |
| 2351 | error ("Can't find an address for __shlib_funcptr"); |
| 2352 | target_write_memory (SYMBOL_VALUE_ADDRESS (msymbol), |
| 2353 | (char *) &new_stub, 4); |
| 2354 | |
| 2355 | /* We want sr4export to call __d_plt_call, so we claim it is |
| 2356 | the final target. Clear trampoline. */ |
| 2357 | fun = new_fun; |
| 2358 | trampoline = NULL; |
| 2359 | } |
| 2360 | } |
| 2361 | |
| 2362 | /* Store upper 21 bits of function address into ldil. fun will either be |
| 2363 | the final target (most cases) or __d_plt_call when calling into a shared |
| 2364 | library and __gcc_plt_call is not available. */ |
| 2365 | store_unsigned_integer |
| 2366 | (&dummy[FUNC_LDIL_OFFSET], |
| 2367 | INSTRUCTION_SIZE, |
| 2368 | deposit_21 (fun >> 11, |
| 2369 | extract_unsigned_integer (&dummy[FUNC_LDIL_OFFSET], |
| 2370 | INSTRUCTION_SIZE))); |
| 2371 | |
| 2372 | /* Store lower 11 bits of function address into ldo */ |
| 2373 | store_unsigned_integer |
| 2374 | (&dummy[FUNC_LDO_OFFSET], |
| 2375 | INSTRUCTION_SIZE, |
| 2376 | deposit_14 (fun & MASK_11, |
| 2377 | extract_unsigned_integer (&dummy[FUNC_LDO_OFFSET], |
| 2378 | INSTRUCTION_SIZE))); |
| 2379 | #ifdef SR4EXPORT_LDIL_OFFSET |
| 2380 | |
| 2381 | { |
| 2382 | CORE_ADDR trampoline_addr; |
| 2383 | |
| 2384 | /* We may still need sr4export's address too. */ |
| 2385 | |
| 2386 | if (trampoline == NULL) |
| 2387 | { |
| 2388 | msymbol = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| 2389 | if (msymbol == NULL) |
| 2390 | error ("Can't find an address for _sr4export trampoline"); |
| 2391 | |
| 2392 | trampoline_addr = SYMBOL_VALUE_ADDRESS (msymbol); |
| 2393 | } |
| 2394 | else |
| 2395 | trampoline_addr = SYMBOL_VALUE_ADDRESS (trampoline); |
| 2396 | |
| 2397 | |
| 2398 | /* Store upper 21 bits of trampoline's address into ldil */ |
| 2399 | store_unsigned_integer |
| 2400 | (&dummy[SR4EXPORT_LDIL_OFFSET], |
| 2401 | INSTRUCTION_SIZE, |
| 2402 | deposit_21 (trampoline_addr >> 11, |
| 2403 | extract_unsigned_integer (&dummy[SR4EXPORT_LDIL_OFFSET], |
| 2404 | INSTRUCTION_SIZE))); |
| 2405 | |
| 2406 | /* Store lower 11 bits of trampoline's address into ldo */ |
| 2407 | store_unsigned_integer |
| 2408 | (&dummy[SR4EXPORT_LDO_OFFSET], |
| 2409 | INSTRUCTION_SIZE, |
| 2410 | deposit_14 (trampoline_addr & MASK_11, |
| 2411 | extract_unsigned_integer (&dummy[SR4EXPORT_LDO_OFFSET], |
| 2412 | INSTRUCTION_SIZE))); |
| 2413 | } |
| 2414 | #endif |
| 2415 | |
| 2416 | write_register (22, pc); |
| 2417 | |
| 2418 | /* If we are in a syscall, then we should call the stack dummy |
| 2419 | directly. $$dyncall is not needed as the kernel sets up the |
| 2420 | space id registers properly based on the value in %r31. In |
| 2421 | fact calling $$dyncall will not work because the value in %r22 |
| 2422 | will be clobbered on the syscall exit path. |
| 2423 | |
| 2424 | Similarly if the current PC is in a shared library. Note however, |
| 2425 | this scheme won't work if the shared library isn't mapped into |
| 2426 | the same space as the stack. */ |
| 2427 | if (flags & 2) |
| 2428 | return pc; |
| 2429 | #ifndef GDB_TARGET_IS_PA_ELF |
| 2430 | else if (som_solib_get_got_by_pc (target_read_pc (inferior_pid))) |
| 2431 | return pc; |
| 2432 | #endif |
| 2433 | else |
| 2434 | return dyncall_addr; |
| 2435 | #endif |
| 2436 | } |
| 2437 | |
| 2438 | |
| 2439 | |
| 2440 | |
| 2441 | /* If the pid is in a syscall, then the FP register is not readable. |
| 2442 | We'll return zero in that case, rather than attempting to read it |
| 2443 | and cause a warning. */ |
| 2444 | CORE_ADDR |
| 2445 | target_read_fp (pid) |
| 2446 | int pid; |
| 2447 | { |
| 2448 | int flags = read_register (FLAGS_REGNUM); |
| 2449 | |
| 2450 | if (flags & 2) |
| 2451 | { |
| 2452 | return (CORE_ADDR) 0; |
| 2453 | } |
| 2454 | |
| 2455 | /* This is the only site that may directly read_register () the FP |
| 2456 | register. All others must use TARGET_READ_FP (). */ |
| 2457 | return read_register (FP_REGNUM); |
| 2458 | } |
| 2459 | |
| 2460 | |
| 2461 | /* Get the PC from %r31 if currently in a syscall. Also mask out privilege |
| 2462 | bits. */ |
| 2463 | |
| 2464 | CORE_ADDR |
| 2465 | target_read_pc (pid) |
| 2466 | int pid; |
| 2467 | { |
| 2468 | int flags = read_register_pid (FLAGS_REGNUM, pid); |
| 2469 | |
| 2470 | /* The following test does not belong here. It is OS-specific, and belongs |
| 2471 | in native code. */ |
| 2472 | /* Test SS_INSYSCALL */ |
| 2473 | if (flags & 2) |
| 2474 | return read_register_pid (31, pid) & ~0x3; |
| 2475 | |
| 2476 | return read_register_pid (PC_REGNUM, pid) & ~0x3; |
| 2477 | } |
| 2478 | |
| 2479 | /* Write out the PC. If currently in a syscall, then also write the new |
| 2480 | PC value into %r31. */ |
| 2481 | |
| 2482 | void |
| 2483 | target_write_pc (v, pid) |
| 2484 | CORE_ADDR v; |
| 2485 | int pid; |
| 2486 | { |
| 2487 | int flags = read_register_pid (FLAGS_REGNUM, pid); |
| 2488 | |
| 2489 | /* The following test does not belong here. It is OS-specific, and belongs |
| 2490 | in native code. */ |
| 2491 | /* If in a syscall, then set %r31. Also make sure to get the |
| 2492 | privilege bits set correctly. */ |
| 2493 | /* Test SS_INSYSCALL */ |
| 2494 | if (flags & 2) |
| 2495 | write_register_pid (31, v | 0x3, pid); |
| 2496 | |
| 2497 | write_register_pid (PC_REGNUM, v, pid); |
| 2498 | write_register_pid (NPC_REGNUM, v + 4, pid); |
| 2499 | } |
| 2500 | |
| 2501 | /* return the alignment of a type in bytes. Structures have the maximum |
| 2502 | alignment required by their fields. */ |
| 2503 | |
| 2504 | static int |
| 2505 | hppa_alignof (type) |
| 2506 | struct type *type; |
| 2507 | { |
| 2508 | int max_align, align, i; |
| 2509 | CHECK_TYPEDEF (type); |
| 2510 | switch (TYPE_CODE (type)) |
| 2511 | { |
| 2512 | case TYPE_CODE_PTR: |
| 2513 | case TYPE_CODE_INT: |
| 2514 | case TYPE_CODE_FLT: |
| 2515 | return TYPE_LENGTH (type); |
| 2516 | case TYPE_CODE_ARRAY: |
| 2517 | return hppa_alignof (TYPE_FIELD_TYPE (type, 0)); |
| 2518 | case TYPE_CODE_STRUCT: |
| 2519 | case TYPE_CODE_UNION: |
| 2520 | max_align = 1; |
| 2521 | for (i = 0; i < TYPE_NFIELDS (type); i++) |
| 2522 | { |
| 2523 | /* Bit fields have no real alignment. */ |
| 2524 | /* if (!TYPE_FIELD_BITPOS (type, i)) */ |
| 2525 | if (!TYPE_FIELD_BITSIZE (type, i)) /* elz: this should be bitsize */ |
| 2526 | { |
| 2527 | align = hppa_alignof (TYPE_FIELD_TYPE (type, i)); |
| 2528 | max_align = max (max_align, align); |
| 2529 | } |
| 2530 | } |
| 2531 | return max_align; |
| 2532 | default: |
| 2533 | return 4; |
| 2534 | } |
| 2535 | } |
| 2536 | |
| 2537 | /* Print the register regnum, or all registers if regnum is -1 */ |
| 2538 | |
| 2539 | void |
| 2540 | pa_do_registers_info (regnum, fpregs) |
| 2541 | int regnum; |
| 2542 | int fpregs; |
| 2543 | { |
| 2544 | char raw_regs[REGISTER_BYTES]; |
| 2545 | int i; |
| 2546 | |
| 2547 | /* Make a copy of gdb's save area (may cause actual |
| 2548 | reads from the target). */ |
| 2549 | for (i = 0; i < NUM_REGS; i++) |
| 2550 | read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i)); |
| 2551 | |
| 2552 | if (regnum == -1) |
| 2553 | pa_print_registers (raw_regs, regnum, fpregs); |
| 2554 | else if (regnum < FP4_REGNUM) |
| 2555 | { |
| 2556 | long reg_val[2]; |
| 2557 | |
| 2558 | /* Why is the value not passed through "extract_signed_integer" |
| 2559 | as in "pa_print_registers" below? */ |
| 2560 | pa_register_look_aside (raw_regs, regnum, ®_val[0]); |
| 2561 | |
| 2562 | if (!is_pa_2) |
| 2563 | { |
| 2564 | printf_unfiltered ("%s %x\n", REGISTER_NAME (regnum), reg_val[1]); |
| 2565 | } |
| 2566 | else |
| 2567 | { |
| 2568 | /* Fancy % formats to prevent leading zeros. */ |
| 2569 | if (reg_val[0] == 0) |
| 2570 | printf_unfiltered ("%s %x\n", REGISTER_NAME (regnum), reg_val[1]); |
| 2571 | else |
| 2572 | printf_unfiltered ("%s %x%8.8x\n", REGISTER_NAME (regnum), |
| 2573 | reg_val[0], reg_val[1]); |
| 2574 | } |
| 2575 | } |
| 2576 | else |
| 2577 | /* Note that real floating point values only start at |
| 2578 | FP4_REGNUM. FP0 and up are just status and error |
| 2579 | registers, which have integral (bit) values. */ |
| 2580 | pa_print_fp_reg (regnum); |
| 2581 | } |
| 2582 | |
| 2583 | /********** new function ********************/ |
| 2584 | void |
| 2585 | pa_do_strcat_registers_info (regnum, fpregs, stream, precision) |
| 2586 | int regnum; |
| 2587 | int fpregs; |
| 2588 | struct ui_file *stream; |
| 2589 | enum precision_type precision; |
| 2590 | { |
| 2591 | char raw_regs[REGISTER_BYTES]; |
| 2592 | int i; |
| 2593 | |
| 2594 | /* Make a copy of gdb's save area (may cause actual |
| 2595 | reads from the target). */ |
| 2596 | for (i = 0; i < NUM_REGS; i++) |
| 2597 | read_relative_register_raw_bytes (i, raw_regs + REGISTER_BYTE (i)); |
| 2598 | |
| 2599 | if (regnum == -1) |
| 2600 | pa_strcat_registers (raw_regs, regnum, fpregs, stream); |
| 2601 | |
| 2602 | else if (regnum < FP4_REGNUM) |
| 2603 | { |
| 2604 | long reg_val[2]; |
| 2605 | |
| 2606 | /* Why is the value not passed through "extract_signed_integer" |
| 2607 | as in "pa_print_registers" below? */ |
| 2608 | pa_register_look_aside (raw_regs, regnum, ®_val[0]); |
| 2609 | |
| 2610 | if (!is_pa_2) |
| 2611 | { |
| 2612 | fprintf_unfiltered (stream, "%s %x", REGISTER_NAME (regnum), reg_val[1]); |
| 2613 | } |
| 2614 | else |
| 2615 | { |
| 2616 | /* Fancy % formats to prevent leading zeros. */ |
| 2617 | if (reg_val[0] == 0) |
| 2618 | fprintf_unfiltered (stream, "%s %x", REGISTER_NAME (regnum), |
| 2619 | reg_val[1]); |
| 2620 | else |
| 2621 | fprintf_unfiltered (stream, "%s %x%8.8x", REGISTER_NAME (regnum), |
| 2622 | reg_val[0], reg_val[1]); |
| 2623 | } |
| 2624 | } |
| 2625 | else |
| 2626 | /* Note that real floating point values only start at |
| 2627 | FP4_REGNUM. FP0 and up are just status and error |
| 2628 | registers, which have integral (bit) values. */ |
| 2629 | pa_strcat_fp_reg (regnum, stream, precision); |
| 2630 | } |
| 2631 | |
| 2632 | /* If this is a PA2.0 machine, fetch the real 64-bit register |
| 2633 | value. Otherwise use the info from gdb's saved register area. |
| 2634 | |
| 2635 | Note that reg_val is really expected to be an array of longs, |
| 2636 | with two elements. */ |
| 2637 | static void |
| 2638 | pa_register_look_aside (raw_regs, regnum, raw_val) |
| 2639 | char *raw_regs; |
| 2640 | int regnum; |
| 2641 | long *raw_val; |
| 2642 | { |
| 2643 | static int know_which = 0; /* False */ |
| 2644 | |
| 2645 | int regaddr; |
| 2646 | unsigned int offset; |
| 2647 | register int i; |
| 2648 | int start; |
| 2649 | |
| 2650 | |
| 2651 | char buf[MAX_REGISTER_RAW_SIZE]; |
| 2652 | long long reg_val; |
| 2653 | |
| 2654 | if (!know_which) |
| 2655 | { |
| 2656 | if (CPU_PA_RISC2_0 == sysconf (_SC_CPU_VERSION)) |
| 2657 | { |
| 2658 | is_pa_2 = (1 == 1); |
| 2659 | } |
| 2660 | |
| 2661 | know_which = 1; /* True */ |
| 2662 | } |
| 2663 | |
| 2664 | raw_val[0] = 0; |
| 2665 | raw_val[1] = 0; |
| 2666 | |
| 2667 | if (!is_pa_2) |
| 2668 | { |
| 2669 | raw_val[1] = *(long *) (raw_regs + REGISTER_BYTE (regnum)); |
| 2670 | return; |
| 2671 | } |
| 2672 | |
| 2673 | /* Code below copied from hppah-nat.c, with fixes for wide |
| 2674 | registers, using different area of save_state, etc. */ |
| 2675 | if (regnum == FLAGS_REGNUM || regnum >= FP0_REGNUM || |
| 2676 | !HAVE_STRUCT_SAVE_STATE_T || !HAVE_STRUCT_MEMBER_SS_WIDE) |
| 2677 | { |
| 2678 | /* Use narrow regs area of save_state and default macro. */ |
| 2679 | offset = U_REGS_OFFSET; |
| 2680 | regaddr = register_addr (regnum, offset); |
| 2681 | start = 1; |
| 2682 | } |
| 2683 | else |
| 2684 | { |
| 2685 | /* Use wide regs area, and calculate registers as 8 bytes wide. |
| 2686 | |
| 2687 | We'd like to do this, but current version of "C" doesn't |
| 2688 | permit "offsetof": |
| 2689 | |
| 2690 | offset = offsetof(save_state_t, ss_wide); |
| 2691 | |
| 2692 | Note that to avoid "C" doing typed pointer arithmetic, we |
| 2693 | have to cast away the type in our offset calculation: |
| 2694 | otherwise we get an offset of 1! */ |
| 2695 | |
| 2696 | /* NB: save_state_t is not available before HPUX 9. |
| 2697 | The ss_wide field is not available previous to HPUX 10.20, |
| 2698 | so to avoid compile-time warnings, we only compile this for |
| 2699 | PA 2.0 processors. This control path should only be followed |
| 2700 | if we're debugging a PA 2.0 processor, so this should not cause |
| 2701 | problems. */ |
| 2702 | |
| 2703 | /* #if the following code out so that this file can still be |
| 2704 | compiled on older HPUX boxes (< 10.20) which don't have |
| 2705 | this structure/structure member. */ |
| 2706 | #if HAVE_STRUCT_SAVE_STATE_T == 1 && HAVE_STRUCT_MEMBER_SS_WIDE == 1 |
| 2707 | save_state_t temp; |
| 2708 | |
| 2709 | offset = ((int) &temp.ss_wide) - ((int) &temp); |
| 2710 | regaddr = offset + regnum * 8; |
| 2711 | start = 0; |
| 2712 | #endif |
| 2713 | } |
| 2714 | |
| 2715 | for (i = start; i < 2; i++) |
| 2716 | { |
| 2717 | errno = 0; |
| 2718 | raw_val[i] = call_ptrace (PT_RUREGS, inferior_pid, |
| 2719 | (PTRACE_ARG3_TYPE) regaddr, 0); |
| 2720 | if (errno != 0) |
| 2721 | { |
| 2722 | /* Warning, not error, in case we are attached; sometimes the |
| 2723 | kernel doesn't let us at the registers. */ |
| 2724 | char *err = safe_strerror (errno); |
| 2725 | char *msg = alloca (strlen (err) + 128); |
| 2726 | sprintf (msg, "reading register %s: %s", REGISTER_NAME (regnum), err); |
| 2727 | warning (msg); |
| 2728 | goto error_exit; |
| 2729 | } |
| 2730 | |
| 2731 | regaddr += sizeof (long); |
| 2732 | } |
| 2733 | |
| 2734 | if (regnum == PCOQ_HEAD_REGNUM || regnum == PCOQ_TAIL_REGNUM) |
| 2735 | raw_val[1] &= ~0x3; /* I think we're masking out space bits */ |
| 2736 | |
| 2737 | error_exit: |
| 2738 | ; |
| 2739 | } |
| 2740 | |
| 2741 | /* "Info all-reg" command */ |
| 2742 | |
| 2743 | static void |
| 2744 | pa_print_registers (raw_regs, regnum, fpregs) |
| 2745 | char *raw_regs; |
| 2746 | int regnum; |
| 2747 | int fpregs; |
| 2748 | { |
| 2749 | int i, j; |
| 2750 | /* Alas, we are compiled so that "long long" is 32 bits */ |
| 2751 | long raw_val[2]; |
| 2752 | long long_val; |
| 2753 | int rows = 48, columns = 2; |
| 2754 | |
| 2755 | for (i = 0; i < rows; i++) |
| 2756 | { |
| 2757 | for (j = 0; j < columns; j++) |
| 2758 | { |
| 2759 | /* We display registers in column-major order. */ |
| 2760 | int regnum = i + j * rows; |
| 2761 | |
| 2762 | /* Q: Why is the value passed through "extract_signed_integer", |
| 2763 | while above, in "pa_do_registers_info" it isn't? |
| 2764 | A: ? */ |
| 2765 | pa_register_look_aside (raw_regs, regnum, &raw_val[0]); |
| 2766 | |
| 2767 | /* Even fancier % formats to prevent leading zeros |
| 2768 | and still maintain the output in columns. */ |
| 2769 | if (!is_pa_2) |
| 2770 | { |
| 2771 | /* Being big-endian, on this machine the low bits |
| 2772 | (the ones we want to look at) are in the second longword. */ |
| 2773 | long_val = extract_signed_integer (&raw_val[1], 4); |
| 2774 | printf_filtered ("%10.10s: %8x ", |
| 2775 | REGISTER_NAME (regnum), long_val); |
| 2776 | } |
| 2777 | else |
| 2778 | { |
| 2779 | /* raw_val = extract_signed_integer(&raw_val, 8); */ |
| 2780 | if (raw_val[0] == 0) |
| 2781 | printf_filtered ("%10.10s: %8x ", |
| 2782 | REGISTER_NAME (regnum), raw_val[1]); |
| 2783 | else |
| 2784 | printf_filtered ("%10.10s: %8x%8.8x ", |
| 2785 | REGISTER_NAME (regnum), |
| 2786 | raw_val[0], raw_val[1]); |
| 2787 | } |
| 2788 | } |
| 2789 | printf_unfiltered ("\n"); |
| 2790 | } |
| 2791 | |
| 2792 | if (fpregs) |
| 2793 | for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */ |
| 2794 | pa_print_fp_reg (i); |
| 2795 | } |
| 2796 | |
| 2797 | /************* new function ******************/ |
| 2798 | static void |
| 2799 | pa_strcat_registers (raw_regs, regnum, fpregs, stream) |
| 2800 | char *raw_regs; |
| 2801 | int regnum; |
| 2802 | int fpregs; |
| 2803 | struct ui_file *stream; |
| 2804 | { |
| 2805 | int i, j; |
| 2806 | long raw_val[2]; /* Alas, we are compiled so that "long long" is 32 bits */ |
| 2807 | long long_val; |
| 2808 | enum precision_type precision; |
| 2809 | |
| 2810 | precision = unspecified_precision; |
| 2811 | |
| 2812 | for (i = 0; i < 18; i++) |
| 2813 | { |
| 2814 | for (j = 0; j < 4; j++) |
| 2815 | { |
| 2816 | /* Q: Why is the value passed through "extract_signed_integer", |
| 2817 | while above, in "pa_do_registers_info" it isn't? |
| 2818 | A: ? */ |
| 2819 | pa_register_look_aside (raw_regs, i + (j * 18), &raw_val[0]); |
| 2820 | |
| 2821 | /* Even fancier % formats to prevent leading zeros |
| 2822 | and still maintain the output in columns. */ |
| 2823 | if (!is_pa_2) |
| 2824 | { |
| 2825 | /* Being big-endian, on this machine the low bits |
| 2826 | (the ones we want to look at) are in the second longword. */ |
| 2827 | long_val = extract_signed_integer (&raw_val[1], 4); |
| 2828 | fprintf_filtered (stream, "%8.8s: %8x ", REGISTER_NAME (i + (j * 18)), long_val); |
| 2829 | } |
| 2830 | else |
| 2831 | { |
| 2832 | /* raw_val = extract_signed_integer(&raw_val, 8); */ |
| 2833 | if (raw_val[0] == 0) |
| 2834 | fprintf_filtered (stream, "%8.8s: %8x ", REGISTER_NAME (i + (j * 18)), |
| 2835 | raw_val[1]); |
| 2836 | else |
| 2837 | fprintf_filtered (stream, "%8.8s: %8x%8.8x ", REGISTER_NAME (i + (j * 18)), |
| 2838 | raw_val[0], raw_val[1]); |
| 2839 | } |
| 2840 | } |
| 2841 | fprintf_unfiltered (stream, "\n"); |
| 2842 | } |
| 2843 | |
| 2844 | if (fpregs) |
| 2845 | for (i = FP4_REGNUM; i < NUM_REGS; i++) /* FP4_REGNUM == 72 */ |
| 2846 | pa_strcat_fp_reg (i, stream, precision); |
| 2847 | } |
| 2848 | |
| 2849 | static void |
| 2850 | pa_print_fp_reg (i) |
| 2851 | int i; |
| 2852 | { |
| 2853 | char raw_buffer[MAX_REGISTER_RAW_SIZE]; |
| 2854 | char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE]; |
| 2855 | |
| 2856 | /* Get 32bits of data. */ |
| 2857 | read_relative_register_raw_bytes (i, raw_buffer); |
| 2858 | |
| 2859 | /* Put it in the buffer. No conversions are ever necessary. */ |
| 2860 | memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i)); |
| 2861 | |
| 2862 | fputs_filtered (REGISTER_NAME (i), gdb_stdout); |
| 2863 | print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout); |
| 2864 | fputs_filtered ("(single precision) ", gdb_stdout); |
| 2865 | |
| 2866 | val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0, |
| 2867 | 1, 0, Val_pretty_default); |
| 2868 | printf_filtered ("\n"); |
| 2869 | |
| 2870 | /* If "i" is even, then this register can also be a double-precision |
| 2871 | FP register. Dump it out as such. */ |
| 2872 | if ((i % 2) == 0) |
| 2873 | { |
| 2874 | /* Get the data in raw format for the 2nd half. */ |
| 2875 | read_relative_register_raw_bytes (i + 1, raw_buffer); |
| 2876 | |
| 2877 | /* Copy it into the appropriate part of the virtual buffer. */ |
| 2878 | memcpy (virtual_buffer + REGISTER_RAW_SIZE (i), raw_buffer, |
| 2879 | REGISTER_RAW_SIZE (i)); |
| 2880 | |
| 2881 | /* Dump it as a double. */ |
| 2882 | fputs_filtered (REGISTER_NAME (i), gdb_stdout); |
| 2883 | print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), gdb_stdout); |
| 2884 | fputs_filtered ("(double precision) ", gdb_stdout); |
| 2885 | |
| 2886 | val_print (builtin_type_double, virtual_buffer, 0, 0, gdb_stdout, 0, |
| 2887 | 1, 0, Val_pretty_default); |
| 2888 | printf_filtered ("\n"); |
| 2889 | } |
| 2890 | } |
| 2891 | |
| 2892 | /*************** new function ***********************/ |
| 2893 | static void |
| 2894 | pa_strcat_fp_reg (i, stream, precision) |
| 2895 | int i; |
| 2896 | struct ui_file *stream; |
| 2897 | enum precision_type precision; |
| 2898 | { |
| 2899 | char raw_buffer[MAX_REGISTER_RAW_SIZE]; |
| 2900 | char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE]; |
| 2901 | |
| 2902 | fputs_filtered (REGISTER_NAME (i), stream); |
| 2903 | print_spaces_filtered (8 - strlen (REGISTER_NAME (i)), stream); |
| 2904 | |
| 2905 | /* Get 32bits of data. */ |
| 2906 | read_relative_register_raw_bytes (i, raw_buffer); |
| 2907 | |
| 2908 | /* Put it in the buffer. No conversions are ever necessary. */ |
| 2909 | memcpy (virtual_buffer, raw_buffer, REGISTER_RAW_SIZE (i)); |
| 2910 | |
| 2911 | if (precision == double_precision && (i % 2) == 0) |
| 2912 | { |
| 2913 | |
| 2914 | char raw_buf[MAX_REGISTER_RAW_SIZE]; |
| 2915 | |
| 2916 | /* Get the data in raw format for the 2nd half. */ |
| 2917 | read_relative_register_raw_bytes (i + 1, raw_buf); |
| 2918 | |
| 2919 | /* Copy it into the appropriate part of the virtual buffer. */ |
| 2920 | memcpy (virtual_buffer + REGISTER_RAW_SIZE (i), raw_buf, REGISTER_RAW_SIZE (i)); |
| 2921 | |
| 2922 | val_print (builtin_type_double, virtual_buffer, 0, 0, stream, 0, |
| 2923 | 1, 0, Val_pretty_default); |
| 2924 | |
| 2925 | } |
| 2926 | else |
| 2927 | { |
| 2928 | val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, stream, 0, |
| 2929 | 1, 0, Val_pretty_default); |
| 2930 | } |
| 2931 | |
| 2932 | } |
| 2933 | |
| 2934 | /* Return one if PC is in the call path of a trampoline, else return zero. |
| 2935 | |
| 2936 | Note we return one for *any* call trampoline (long-call, arg-reloc), not |
| 2937 | just shared library trampolines (import, export). */ |
| 2938 | |
| 2939 | int |
| 2940 | in_solib_call_trampoline (pc, name) |
| 2941 | CORE_ADDR pc; |
| 2942 | char *name; |
| 2943 | { |
| 2944 | struct minimal_symbol *minsym; |
| 2945 | struct unwind_table_entry *u; |
| 2946 | static CORE_ADDR dyncall = 0; |
| 2947 | static CORE_ADDR sr4export = 0; |
| 2948 | |
| 2949 | #ifdef GDB_TARGET_IS_HPPA_20W |
| 2950 | /* PA64 has a completely different stub/trampoline scheme. Is it |
| 2951 | better? Maybe. It's certainly harder to determine with any |
| 2952 | certainty that we are in a stub because we can not refer to the |
| 2953 | unwinders to help. |
| 2954 | |
| 2955 | The heuristic is simple. Try to lookup the current PC value in th |
| 2956 | minimal symbol table. If that fails, then assume we are not in a |
| 2957 | stub and return. |
| 2958 | |
| 2959 | Then see if the PC value falls within the section bounds for the |
| 2960 | section containing the minimal symbol we found in the first |
| 2961 | step. If it does, then assume we are not in a stub and return. |
| 2962 | |
| 2963 | Finally peek at the instructions to see if they look like a stub. */ |
| 2964 | { |
| 2965 | struct minimal_symbol *minsym; |
| 2966 | asection *sec; |
| 2967 | CORE_ADDR addr; |
| 2968 | int insn, i; |
| 2969 | |
| 2970 | minsym = lookup_minimal_symbol_by_pc (pc); |
| 2971 | if (! minsym) |
| 2972 | return 0; |
| 2973 | |
| 2974 | sec = SYMBOL_BFD_SECTION (minsym); |
| 2975 | |
| 2976 | if (sec->vma <= pc |
| 2977 | && sec->vma + sec->_cooked_size < pc) |
| 2978 | return 0; |
| 2979 | |
| 2980 | /* We might be in a stub. Peek at the instructions. Stubs are 3 |
| 2981 | instructions long. */ |
| 2982 | insn = read_memory_integer (pc, 4); |
| 2983 | |
| 2984 | /* Find out where we we think we are within the stub. */ |
| 2985 | if ((insn & 0xffffc00e) == 0x53610000) |
| 2986 | addr = pc; |
| 2987 | else if ((insn & 0xffffffff) == 0xe820d000) |
| 2988 | addr = pc - 4; |
| 2989 | else if ((insn & 0xffffc00e) == 0x537b0000) |
| 2990 | addr = pc - 8; |
| 2991 | else |
| 2992 | return 0; |
| 2993 | |
| 2994 | /* Now verify each insn in the range looks like a stub instruction. */ |
| 2995 | insn = read_memory_integer (addr, 4); |
| 2996 | if ((insn & 0xffffc00e) != 0x53610000) |
| 2997 | return 0; |
| 2998 | |
| 2999 | /* Now verify each insn in the range looks like a stub instruction. */ |
| 3000 | insn = read_memory_integer (addr + 4, 4); |
| 3001 | if ((insn & 0xffffffff) != 0xe820d000) |
| 3002 | return 0; |
| 3003 | |
| 3004 | /* Now verify each insn in the range looks like a stub instruction. */ |
| 3005 | insn = read_memory_integer (addr + 8, 4); |
| 3006 | if ((insn & 0xffffc00e) != 0x537b0000) |
| 3007 | return 0; |
| 3008 | |
| 3009 | /* Looks like a stub. */ |
| 3010 | return 1; |
| 3011 | } |
| 3012 | #endif |
| 3013 | |
| 3014 | /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a |
| 3015 | new exec file */ |
| 3016 | |
| 3017 | /* First see if PC is in one of the two C-library trampolines. */ |
| 3018 | if (!dyncall) |
| 3019 | { |
| 3020 | minsym = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| 3021 | if (minsym) |
| 3022 | dyncall = SYMBOL_VALUE_ADDRESS (minsym); |
| 3023 | else |
| 3024 | dyncall = -1; |
| 3025 | } |
| 3026 | |
| 3027 | if (!sr4export) |
| 3028 | { |
| 3029 | minsym = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| 3030 | if (minsym) |
| 3031 | sr4export = SYMBOL_VALUE_ADDRESS (minsym); |
| 3032 | else |
| 3033 | sr4export = -1; |
| 3034 | } |
| 3035 | |
| 3036 | if (pc == dyncall || pc == sr4export) |
| 3037 | return 1; |
| 3038 | |
| 3039 | minsym = lookup_minimal_symbol_by_pc (pc); |
| 3040 | if (minsym && strcmp (SYMBOL_NAME (minsym), ".stub") == 0) |
| 3041 | return 1; |
| 3042 | |
| 3043 | /* Get the unwind descriptor corresponding to PC, return zero |
| 3044 | if no unwind was found. */ |
| 3045 | u = find_unwind_entry (pc); |
| 3046 | if (!u) |
| 3047 | return 0; |
| 3048 | |
| 3049 | /* If this isn't a linker stub, then return now. */ |
| 3050 | if (u->stub_unwind.stub_type == 0) |
| 3051 | return 0; |
| 3052 | |
| 3053 | /* By definition a long-branch stub is a call stub. */ |
| 3054 | if (u->stub_unwind.stub_type == LONG_BRANCH) |
| 3055 | return 1; |
| 3056 | |
| 3057 | /* The call and return path execute the same instructions within |
| 3058 | an IMPORT stub! So an IMPORT stub is both a call and return |
| 3059 | trampoline. */ |
| 3060 | if (u->stub_unwind.stub_type == IMPORT) |
| 3061 | return 1; |
| 3062 | |
| 3063 | /* Parameter relocation stubs always have a call path and may have a |
| 3064 | return path. */ |
| 3065 | if (u->stub_unwind.stub_type == PARAMETER_RELOCATION |
| 3066 | || u->stub_unwind.stub_type == EXPORT) |
| 3067 | { |
| 3068 | CORE_ADDR addr; |
| 3069 | |
| 3070 | /* Search forward from the current PC until we hit a branch |
| 3071 | or the end of the stub. */ |
| 3072 | for (addr = pc; addr <= u->region_end; addr += 4) |
| 3073 | { |
| 3074 | unsigned long insn; |
| 3075 | |
| 3076 | insn = read_memory_integer (addr, 4); |
| 3077 | |
| 3078 | /* Does it look like a bl? If so then it's the call path, if |
| 3079 | we find a bv or be first, then we're on the return path. */ |
| 3080 | if ((insn & 0xfc00e000) == 0xe8000000) |
| 3081 | return 1; |
| 3082 | else if ((insn & 0xfc00e001) == 0xe800c000 |
| 3083 | || (insn & 0xfc000000) == 0xe0000000) |
| 3084 | return 0; |
| 3085 | } |
| 3086 | |
| 3087 | /* Should never happen. */ |
| 3088 | warning ("Unable to find branch in parameter relocation stub.\n"); |
| 3089 | return 0; |
| 3090 | } |
| 3091 | |
| 3092 | /* Unknown stub type. For now, just return zero. */ |
| 3093 | return 0; |
| 3094 | } |
| 3095 | |
| 3096 | /* Return one if PC is in the return path of a trampoline, else return zero. |
| 3097 | |
| 3098 | Note we return one for *any* call trampoline (long-call, arg-reloc), not |
| 3099 | just shared library trampolines (import, export). */ |
| 3100 | |
| 3101 | int |
| 3102 | in_solib_return_trampoline (pc, name) |
| 3103 | CORE_ADDR pc; |
| 3104 | char *name; |
| 3105 | { |
| 3106 | struct unwind_table_entry *u; |
| 3107 | |
| 3108 | /* Get the unwind descriptor corresponding to PC, return zero |
| 3109 | if no unwind was found. */ |
| 3110 | u = find_unwind_entry (pc); |
| 3111 | if (!u) |
| 3112 | return 0; |
| 3113 | |
| 3114 | /* If this isn't a linker stub or it's just a long branch stub, then |
| 3115 | return zero. */ |
| 3116 | if (u->stub_unwind.stub_type == 0 || u->stub_unwind.stub_type == LONG_BRANCH) |
| 3117 | return 0; |
| 3118 | |
| 3119 | /* The call and return path execute the same instructions within |
| 3120 | an IMPORT stub! So an IMPORT stub is both a call and return |
| 3121 | trampoline. */ |
| 3122 | if (u->stub_unwind.stub_type == IMPORT) |
| 3123 | return 1; |
| 3124 | |
| 3125 | /* Parameter relocation stubs always have a call path and may have a |
| 3126 | return path. */ |
| 3127 | if (u->stub_unwind.stub_type == PARAMETER_RELOCATION |
| 3128 | || u->stub_unwind.stub_type == EXPORT) |
| 3129 | { |
| 3130 | CORE_ADDR addr; |
| 3131 | |
| 3132 | /* Search forward from the current PC until we hit a branch |
| 3133 | or the end of the stub. */ |
| 3134 | for (addr = pc; addr <= u->region_end; addr += 4) |
| 3135 | { |
| 3136 | unsigned long insn; |
| 3137 | |
| 3138 | insn = read_memory_integer (addr, 4); |
| 3139 | |
| 3140 | /* Does it look like a bl? If so then it's the call path, if |
| 3141 | we find a bv or be first, then we're on the return path. */ |
| 3142 | if ((insn & 0xfc00e000) == 0xe8000000) |
| 3143 | return 0; |
| 3144 | else if ((insn & 0xfc00e001) == 0xe800c000 |
| 3145 | || (insn & 0xfc000000) == 0xe0000000) |
| 3146 | return 1; |
| 3147 | } |
| 3148 | |
| 3149 | /* Should never happen. */ |
| 3150 | warning ("Unable to find branch in parameter relocation stub.\n"); |
| 3151 | return 0; |
| 3152 | } |
| 3153 | |
| 3154 | /* Unknown stub type. For now, just return zero. */ |
| 3155 | return 0; |
| 3156 | |
| 3157 | } |
| 3158 | |
| 3159 | /* Figure out if PC is in a trampoline, and if so find out where |
| 3160 | the trampoline will jump to. If not in a trampoline, return zero. |
| 3161 | |
| 3162 | Simple code examination probably is not a good idea since the code |
| 3163 | sequences in trampolines can also appear in user code. |
| 3164 | |
| 3165 | We use unwinds and information from the minimal symbol table to |
| 3166 | determine when we're in a trampoline. This won't work for ELF |
| 3167 | (yet) since it doesn't create stub unwind entries. Whether or |
| 3168 | not ELF will create stub unwinds or normal unwinds for linker |
| 3169 | stubs is still being debated. |
| 3170 | |
| 3171 | This should handle simple calls through dyncall or sr4export, |
| 3172 | long calls, argument relocation stubs, and dyncall/sr4export |
| 3173 | calling an argument relocation stub. It even handles some stubs |
| 3174 | used in dynamic executables. */ |
| 3175 | |
| 3176 | CORE_ADDR |
| 3177 | skip_trampoline_code (pc, name) |
| 3178 | CORE_ADDR pc; |
| 3179 | char *name; |
| 3180 | { |
| 3181 | long orig_pc = pc; |
| 3182 | long prev_inst, curr_inst, loc; |
| 3183 | static CORE_ADDR dyncall = 0; |
| 3184 | static CORE_ADDR dyncall_external = 0; |
| 3185 | static CORE_ADDR sr4export = 0; |
| 3186 | struct minimal_symbol *msym; |
| 3187 | struct unwind_table_entry *u; |
| 3188 | |
| 3189 | /* FIXME XXX - dyncall and sr4export must be initialized whenever we get a |
| 3190 | new exec file */ |
| 3191 | |
| 3192 | if (!dyncall) |
| 3193 | { |
| 3194 | msym = lookup_minimal_symbol ("$$dyncall", NULL, NULL); |
| 3195 | if (msym) |
| 3196 | dyncall = SYMBOL_VALUE_ADDRESS (msym); |
| 3197 | else |
| 3198 | dyncall = -1; |
| 3199 | } |
| 3200 | |
| 3201 | if (!dyncall_external) |
| 3202 | { |
| 3203 | msym = lookup_minimal_symbol ("$$dyncall_external", NULL, NULL); |
| 3204 | if (msym) |
| 3205 | dyncall_external = SYMBOL_VALUE_ADDRESS (msym); |
| 3206 | else |
| 3207 | dyncall_external = -1; |
| 3208 | } |
| 3209 | |
| 3210 | if (!sr4export) |
| 3211 | { |
| 3212 | msym = lookup_minimal_symbol ("_sr4export", NULL, NULL); |
| 3213 | if (msym) |
| 3214 | sr4export = SYMBOL_VALUE_ADDRESS (msym); |
| 3215 | else |
| 3216 | sr4export = -1; |
| 3217 | } |
| 3218 | |
| 3219 | /* Addresses passed to dyncall may *NOT* be the actual address |
| 3220 | of the function. So we may have to do something special. */ |
| 3221 | if (pc == dyncall) |
| 3222 | { |
| 3223 | pc = (CORE_ADDR) read_register (22); |
| 3224 | |
| 3225 | /* If bit 30 (counting from the left) is on, then pc is the address of |
| 3226 | the PLT entry for this function, not the address of the function |
| 3227 | itself. Bit 31 has meaning too, but only for MPE. */ |
| 3228 | if (pc & 0x2) |
| 3229 | pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8); |
| 3230 | } |
| 3231 | if (pc == dyncall_external) |
| 3232 | { |
| 3233 | pc = (CORE_ADDR) read_register (22); |
| 3234 | pc = (CORE_ADDR) read_memory_integer (pc & ~0x3, TARGET_PTR_BIT / 8); |
| 3235 | } |
| 3236 | else if (pc == sr4export) |
| 3237 | pc = (CORE_ADDR) (read_register (22)); |
| 3238 | |
| 3239 | /* Get the unwind descriptor corresponding to PC, return zero |
| 3240 | if no unwind was found. */ |
| 3241 | u = find_unwind_entry (pc); |
| 3242 | if (!u) |
| 3243 | return 0; |
| 3244 | |
| 3245 | /* If this isn't a linker stub, then return now. */ |
| 3246 | /* elz: attention here! (FIXME) because of a compiler/linker |
| 3247 | error, some stubs which should have a non zero stub_unwind.stub_type |
| 3248 | have unfortunately a value of zero. So this function would return here |
| 3249 | as if we were not in a trampoline. To fix this, we go look at the partial |
| 3250 | symbol information, which reports this guy as a stub. |
| 3251 | (FIXME): Unfortunately, we are not that lucky: it turns out that the |
| 3252 | partial symbol information is also wrong sometimes. This is because |
| 3253 | when it is entered (somread.c::som_symtab_read()) it can happen that |
| 3254 | if the type of the symbol (from the som) is Entry, and the symbol is |
| 3255 | in a shared library, then it can also be a trampoline. This would |
| 3256 | be OK, except that I believe the way they decide if we are ina shared library |
| 3257 | does not work. SOOOO..., even if we have a regular function w/o trampolines |
| 3258 | its minimal symbol can be assigned type mst_solib_trampoline. |
| 3259 | Also, if we find that the symbol is a real stub, then we fix the unwind |
| 3260 | descriptor, and define the stub type to be EXPORT. |
| 3261 | Hopefully this is correct most of the times. */ |
| 3262 | if (u->stub_unwind.stub_type == 0) |
| 3263 | { |
| 3264 | |
| 3265 | /* elz: NOTE (FIXME!) once the problem with the unwind information is fixed |
| 3266 | we can delete all the code which appears between the lines */ |
| 3267 | /*--------------------------------------------------------------------------*/ |
| 3268 | msym = lookup_minimal_symbol_by_pc (pc); |
| 3269 | |
| 3270 | if (msym == NULL || MSYMBOL_TYPE (msym) != mst_solib_trampoline) |
| 3271 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3272 | |
| 3273 | else if (msym != NULL && MSYMBOL_TYPE (msym) == mst_solib_trampoline) |
| 3274 | { |
| 3275 | struct objfile *objfile; |
| 3276 | struct minimal_symbol *msymbol; |
| 3277 | int function_found = 0; |
| 3278 | |
| 3279 | /* go look if there is another minimal symbol with the same name as |
| 3280 | this one, but with type mst_text. This would happen if the msym |
| 3281 | is an actual trampoline, in which case there would be another |
| 3282 | symbol with the same name corresponding to the real function */ |
| 3283 | |
| 3284 | ALL_MSYMBOLS (objfile, msymbol) |
| 3285 | { |
| 3286 | if (MSYMBOL_TYPE (msymbol) == mst_text |
| 3287 | && STREQ (SYMBOL_NAME (msymbol), SYMBOL_NAME (msym))) |
| 3288 | { |
| 3289 | function_found = 1; |
| 3290 | break; |
| 3291 | } |
| 3292 | } |
| 3293 | |
| 3294 | if (function_found) |
| 3295 | /* the type of msym is correct (mst_solib_trampoline), but |
| 3296 | the unwind info is wrong, so set it to the correct value */ |
| 3297 | u->stub_unwind.stub_type = EXPORT; |
| 3298 | else |
| 3299 | /* the stub type info in the unwind is correct (this is not a |
| 3300 | trampoline), but the msym type information is wrong, it |
| 3301 | should be mst_text. So we need to fix the msym, and also |
| 3302 | get out of this function */ |
| 3303 | { |
| 3304 | MSYMBOL_TYPE (msym) = mst_text; |
| 3305 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3306 | } |
| 3307 | } |
| 3308 | |
| 3309 | /*--------------------------------------------------------------------------*/ |
| 3310 | } |
| 3311 | |
| 3312 | /* It's a stub. Search for a branch and figure out where it goes. |
| 3313 | Note we have to handle multi insn branch sequences like ldil;ble. |
| 3314 | Most (all?) other branches can be determined by examining the contents |
| 3315 | of certain registers and the stack. */ |
| 3316 | |
| 3317 | loc = pc; |
| 3318 | curr_inst = 0; |
| 3319 | prev_inst = 0; |
| 3320 | while (1) |
| 3321 | { |
| 3322 | /* Make sure we haven't walked outside the range of this stub. */ |
| 3323 | if (u != find_unwind_entry (loc)) |
| 3324 | { |
| 3325 | warning ("Unable to find branch in linker stub"); |
| 3326 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3327 | } |
| 3328 | |
| 3329 | prev_inst = curr_inst; |
| 3330 | curr_inst = read_memory_integer (loc, 4); |
| 3331 | |
| 3332 | /* Does it look like a branch external using %r1? Then it's the |
| 3333 | branch from the stub to the actual function. */ |
| 3334 | if ((curr_inst & 0xffe0e000) == 0xe0202000) |
| 3335 | { |
| 3336 | /* Yup. See if the previous instruction loaded |
| 3337 | a value into %r1. If so compute and return the jump address. */ |
| 3338 | if ((prev_inst & 0xffe00000) == 0x20200000) |
| 3339 | return (extract_21 (prev_inst) + extract_17 (curr_inst)) & ~0x3; |
| 3340 | else |
| 3341 | { |
| 3342 | warning ("Unable to find ldil X,%%r1 before ble Y(%%sr4,%%r1)."); |
| 3343 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3344 | } |
| 3345 | } |
| 3346 | |
| 3347 | /* Does it look like a be 0(sr0,%r21)? OR |
| 3348 | Does it look like a be, n 0(sr0,%r21)? OR |
| 3349 | Does it look like a bve (r21)? (this is on PA2.0) |
| 3350 | Does it look like a bve, n(r21)? (this is also on PA2.0) |
| 3351 | That's the branch from an |
| 3352 | import stub to an export stub. |
| 3353 | |
| 3354 | It is impossible to determine the target of the branch via |
| 3355 | simple examination of instructions and/or data (consider |
| 3356 | that the address in the plabel may be the address of the |
| 3357 | bind-on-reference routine in the dynamic loader). |
| 3358 | |
| 3359 | So we have try an alternative approach. |
| 3360 | |
| 3361 | Get the name of the symbol at our current location; it should |
| 3362 | be a stub symbol with the same name as the symbol in the |
| 3363 | shared library. |
| 3364 | |
| 3365 | Then lookup a minimal symbol with the same name; we should |
| 3366 | get the minimal symbol for the target routine in the shared |
| 3367 | library as those take precedence of import/export stubs. */ |
| 3368 | if ((curr_inst == 0xe2a00000) || |
| 3369 | (curr_inst == 0xe2a00002) || |
| 3370 | (curr_inst == 0xeaa0d000) || |
| 3371 | (curr_inst == 0xeaa0d002)) |
| 3372 | { |
| 3373 | struct minimal_symbol *stubsym, *libsym; |
| 3374 | |
| 3375 | stubsym = lookup_minimal_symbol_by_pc (loc); |
| 3376 | if (stubsym == NULL) |
| 3377 | { |
| 3378 | warning ("Unable to find symbol for 0x%x", loc); |
| 3379 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3380 | } |
| 3381 | |
| 3382 | libsym = lookup_minimal_symbol (SYMBOL_NAME (stubsym), NULL, NULL); |
| 3383 | if (libsym == NULL) |
| 3384 | { |
| 3385 | warning ("Unable to find library symbol for %s\n", |
| 3386 | SYMBOL_NAME (stubsym)); |
| 3387 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3388 | } |
| 3389 | |
| 3390 | return SYMBOL_VALUE (libsym); |
| 3391 | } |
| 3392 | |
| 3393 | /* Does it look like bl X,%rp or bl X,%r0? Another way to do a |
| 3394 | branch from the stub to the actual function. */ |
| 3395 | /*elz */ |
| 3396 | else if ((curr_inst & 0xffe0e000) == 0xe8400000 |
| 3397 | || (curr_inst & 0xffe0e000) == 0xe8000000 |
| 3398 | || (curr_inst & 0xffe0e000) == 0xe800A000) |
| 3399 | return (loc + extract_17 (curr_inst) + 8) & ~0x3; |
| 3400 | |
| 3401 | /* Does it look like bv (rp)? Note this depends on the |
| 3402 | current stack pointer being the same as the stack |
| 3403 | pointer in the stub itself! This is a branch on from the |
| 3404 | stub back to the original caller. */ |
| 3405 | /*else if ((curr_inst & 0xffe0e000) == 0xe840c000) */ |
| 3406 | else if ((curr_inst & 0xffe0f000) == 0xe840c000) |
| 3407 | { |
| 3408 | /* Yup. See if the previous instruction loaded |
| 3409 | rp from sp - 8. */ |
| 3410 | if (prev_inst == 0x4bc23ff1) |
| 3411 | return (read_memory_integer |
| 3412 | (read_register (SP_REGNUM) - 8, 4)) & ~0x3; |
| 3413 | else |
| 3414 | { |
| 3415 | warning ("Unable to find restore of %%rp before bv (%%rp)."); |
| 3416 | return orig_pc == pc ? 0 : pc & ~0x3; |
| 3417 | } |
| 3418 | } |
| 3419 | |
| 3420 | /* elz: added this case to capture the new instruction |
| 3421 | at the end of the return part of an export stub used by |
| 3422 | the PA2.0: BVE, n (rp) */ |
| 3423 | else if ((curr_inst & 0xffe0f000) == 0xe840d000) |
| 3424 | { |
| 3425 | return (read_memory_integer |
| 3426 | (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3; |
| 3427 | } |
| 3428 | |
| 3429 | /* What about be,n 0(sr0,%rp)? It's just another way we return to |
| 3430 | the original caller from the stub. Used in dynamic executables. */ |
| 3431 | else if (curr_inst == 0xe0400002) |
| 3432 | { |
| 3433 | /* The value we jump to is sitting in sp - 24. But that's |
| 3434 | loaded several instructions before the be instruction. |
| 3435 | I guess we could check for the previous instruction being |
| 3436 | mtsp %r1,%sr0 if we want to do sanity checking. */ |
| 3437 | return (read_memory_integer |
| 3438 | (read_register (SP_REGNUM) - 24, TARGET_PTR_BIT / 8)) & ~0x3; |
| 3439 | } |
| 3440 | |
| 3441 | /* Haven't found the branch yet, but we're still in the stub. |
| 3442 | Keep looking. */ |
| 3443 | loc += 4; |
| 3444 | } |
| 3445 | } |
| 3446 | |
| 3447 | |
| 3448 | /* For the given instruction (INST), return any adjustment it makes |
| 3449 | to the stack pointer or zero for no adjustment. |
| 3450 | |
| 3451 | This only handles instructions commonly found in prologues. */ |
| 3452 | |
| 3453 | static int |
| 3454 | prologue_inst_adjust_sp (inst) |
| 3455 | unsigned long inst; |
| 3456 | { |
| 3457 | /* This must persist across calls. */ |
| 3458 | static int save_high21; |
| 3459 | |
| 3460 | /* The most common way to perform a stack adjustment ldo X(sp),sp */ |
| 3461 | if ((inst & 0xffffc000) == 0x37de0000) |
| 3462 | return extract_14 (inst); |
| 3463 | |
| 3464 | /* stwm X,D(sp) */ |
| 3465 | if ((inst & 0xffe00000) == 0x6fc00000) |
| 3466 | return extract_14 (inst); |
| 3467 | |
| 3468 | /* std,ma X,D(sp) */ |
| 3469 | if ((inst & 0xffe00008) == 0x73c00008) |
| 3470 | return (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3); |
| 3471 | |
| 3472 | /* addil high21,%r1; ldo low11,(%r1),%r30) |
| 3473 | save high bits in save_high21 for later use. */ |
| 3474 | if ((inst & 0xffe00000) == 0x28200000) |
| 3475 | { |
| 3476 | save_high21 = extract_21 (inst); |
| 3477 | return 0; |
| 3478 | } |
| 3479 | |
| 3480 | if ((inst & 0xffff0000) == 0x343e0000) |
| 3481 | return save_high21 + extract_14 (inst); |
| 3482 | |
| 3483 | /* fstws as used by the HP compilers. */ |
| 3484 | if ((inst & 0xffffffe0) == 0x2fd01220) |
| 3485 | return extract_5_load (inst); |
| 3486 | |
| 3487 | /* No adjustment. */ |
| 3488 | return 0; |
| 3489 | } |
| 3490 | |
| 3491 | /* Return nonzero if INST is a branch of some kind, else return zero. */ |
| 3492 | |
| 3493 | static int |
| 3494 | is_branch (inst) |
| 3495 | unsigned long inst; |
| 3496 | { |
| 3497 | switch (inst >> 26) |
| 3498 | { |
| 3499 | case 0x20: |
| 3500 | case 0x21: |
| 3501 | case 0x22: |
| 3502 | case 0x23: |
| 3503 | case 0x27: |
| 3504 | case 0x28: |
| 3505 | case 0x29: |
| 3506 | case 0x2a: |
| 3507 | case 0x2b: |
| 3508 | case 0x2f: |
| 3509 | case 0x30: |
| 3510 | case 0x31: |
| 3511 | case 0x32: |
| 3512 | case 0x33: |
| 3513 | case 0x38: |
| 3514 | case 0x39: |
| 3515 | case 0x3a: |
| 3516 | case 0x3b: |
| 3517 | return 1; |
| 3518 | |
| 3519 | default: |
| 3520 | return 0; |
| 3521 | } |
| 3522 | } |
| 3523 | |
| 3524 | /* Return the register number for a GR which is saved by INST or |
| 3525 | zero it INST does not save a GR. */ |
| 3526 | |
| 3527 | static int |
| 3528 | inst_saves_gr (inst) |
| 3529 | unsigned long inst; |
| 3530 | { |
| 3531 | /* Does it look like a stw? */ |
| 3532 | if ((inst >> 26) == 0x1a || (inst >> 26) == 0x1b |
| 3533 | || (inst >> 26) == 0x1f |
| 3534 | || ((inst >> 26) == 0x1f |
| 3535 | && ((inst >> 6) == 0xa))) |
| 3536 | return extract_5R_store (inst); |
| 3537 | |
| 3538 | /* Does it look like a std? */ |
| 3539 | if ((inst >> 26) == 0x1c |
| 3540 | || ((inst >> 26) == 0x03 |
| 3541 | && ((inst >> 6) & 0xf) == 0xb)) |
| 3542 | return extract_5R_store (inst); |
| 3543 | |
| 3544 | /* Does it look like a stwm? GCC & HPC may use this in prologues. */ |
| 3545 | if ((inst >> 26) == 0x1b) |
| 3546 | return extract_5R_store (inst); |
| 3547 | |
| 3548 | /* Does it look like sth or stb? HPC versions 9.0 and later use these |
| 3549 | too. */ |
| 3550 | if ((inst >> 26) == 0x19 || (inst >> 26) == 0x18 |
| 3551 | || ((inst >> 26) == 0x3 |
| 3552 | && (((inst >> 6) & 0xf) == 0x8 |
| 3553 | || (inst >> 6) & 0xf) == 0x9)) |
| 3554 | return extract_5R_store (inst); |
| 3555 | |
| 3556 | return 0; |
| 3557 | } |
| 3558 | |
| 3559 | /* Return the register number for a FR which is saved by INST or |
| 3560 | zero it INST does not save a FR. |
| 3561 | |
| 3562 | Note we only care about full 64bit register stores (that's the only |
| 3563 | kind of stores the prologue will use). |
| 3564 | |
| 3565 | FIXME: What about argument stores with the HP compiler in ANSI mode? */ |
| 3566 | |
| 3567 | static int |
| 3568 | inst_saves_fr (inst) |
| 3569 | unsigned long inst; |
| 3570 | { |
| 3571 | /* is this an FSTD ? */ |
| 3572 | if ((inst & 0xfc00dfc0) == 0x2c001200) |
| 3573 | return extract_5r_store (inst); |
| 3574 | if ((inst & 0xfc000002) == 0x70000002) |
| 3575 | return extract_5R_store (inst); |
| 3576 | /* is this an FSTW ? */ |
| 3577 | if ((inst & 0xfc00df80) == 0x24001200) |
| 3578 | return extract_5r_store (inst); |
| 3579 | if ((inst & 0xfc000002) == 0x7c000000) |
| 3580 | return extract_5R_store (inst); |
| 3581 | return 0; |
| 3582 | } |
| 3583 | |
| 3584 | /* Advance PC across any function entry prologue instructions |
| 3585 | to reach some "real" code. |
| 3586 | |
| 3587 | Use information in the unwind table to determine what exactly should |
| 3588 | be in the prologue. */ |
| 3589 | |
| 3590 | |
| 3591 | CORE_ADDR |
| 3592 | skip_prologue_hard_way (pc) |
| 3593 | CORE_ADDR pc; |
| 3594 | { |
| 3595 | char buf[4]; |
| 3596 | CORE_ADDR orig_pc = pc; |
| 3597 | unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp; |
| 3598 | unsigned long args_stored, status, i, restart_gr, restart_fr; |
| 3599 | struct unwind_table_entry *u; |
| 3600 | |
| 3601 | restart_gr = 0; |
| 3602 | restart_fr = 0; |
| 3603 | |
| 3604 | restart: |
| 3605 | u = find_unwind_entry (pc); |
| 3606 | if (!u) |
| 3607 | return pc; |
| 3608 | |
| 3609 | /* If we are not at the beginning of a function, then return now. */ |
| 3610 | if ((pc & ~0x3) != u->region_start) |
| 3611 | return pc; |
| 3612 | |
| 3613 | /* This is how much of a frame adjustment we need to account for. */ |
| 3614 | stack_remaining = u->Total_frame_size << 3; |
| 3615 | |
| 3616 | /* Magic register saves we want to know about. */ |
| 3617 | save_rp = u->Save_RP; |
| 3618 | save_sp = u->Save_SP; |
| 3619 | |
| 3620 | /* An indication that args may be stored into the stack. Unfortunately |
| 3621 | the HPUX compilers tend to set this in cases where no args were |
| 3622 | stored too!. */ |
| 3623 | args_stored = 1; |
| 3624 | |
| 3625 | /* Turn the Entry_GR field into a bitmask. */ |
| 3626 | save_gr = 0; |
| 3627 | for (i = 3; i < u->Entry_GR + 3; i++) |
| 3628 | { |
| 3629 | /* Frame pointer gets saved into a special location. */ |
| 3630 | if (u->Save_SP && i == FP_REGNUM) |
| 3631 | continue; |
| 3632 | |
| 3633 | save_gr |= (1 << i); |
| 3634 | } |
| 3635 | save_gr &= ~restart_gr; |
| 3636 | |
| 3637 | /* Turn the Entry_FR field into a bitmask too. */ |
| 3638 | save_fr = 0; |
| 3639 | for (i = 12; i < u->Entry_FR + 12; i++) |
| 3640 | save_fr |= (1 << i); |
| 3641 | save_fr &= ~restart_fr; |
| 3642 | |
| 3643 | /* Loop until we find everything of interest or hit a branch. |
| 3644 | |
| 3645 | For unoptimized GCC code and for any HP CC code this will never ever |
| 3646 | examine any user instructions. |
| 3647 | |
| 3648 | For optimzied GCC code we're faced with problems. GCC will schedule |
| 3649 | its prologue and make prologue instructions available for delay slot |
| 3650 | filling. The end result is user code gets mixed in with the prologue |
| 3651 | and a prologue instruction may be in the delay slot of the first branch |
| 3652 | or call. |
| 3653 | |
| 3654 | Some unexpected things are expected with debugging optimized code, so |
| 3655 | we allow this routine to walk past user instructions in optimized |
| 3656 | GCC code. */ |
| 3657 | while (save_gr || save_fr || save_rp || save_sp || stack_remaining > 0 |
| 3658 | || args_stored) |
| 3659 | { |
| 3660 | unsigned int reg_num; |
| 3661 | unsigned long old_stack_remaining, old_save_gr, old_save_fr; |
| 3662 | unsigned long old_save_rp, old_save_sp, next_inst; |
| 3663 | |
| 3664 | /* Save copies of all the triggers so we can compare them later |
| 3665 | (only for HPC). */ |
| 3666 | old_save_gr = save_gr; |
| 3667 | old_save_fr = save_fr; |
| 3668 | old_save_rp = save_rp; |
| 3669 | old_save_sp = save_sp; |
| 3670 | old_stack_remaining = stack_remaining; |
| 3671 | |
| 3672 | status = target_read_memory (pc, buf, 4); |
| 3673 | inst = extract_unsigned_integer (buf, 4); |
| 3674 | |
| 3675 | /* Yow! */ |
| 3676 | if (status != 0) |
| 3677 | return pc; |
| 3678 | |
| 3679 | /* Note the interesting effects of this instruction. */ |
| 3680 | stack_remaining -= prologue_inst_adjust_sp (inst); |
| 3681 | |
| 3682 | /* There are limited ways to store the return pointer into the |
| 3683 | stack. */ |
| 3684 | if (inst == 0x6bc23fd9 || inst == 0x0fc212c1) |
| 3685 | save_rp = 0; |
| 3686 | |
| 3687 | /* These are the only ways we save SP into the stack. At this time |
| 3688 | the HP compilers never bother to save SP into the stack. */ |
| 3689 | if ((inst & 0xffffc000) == 0x6fc10000 |
| 3690 | || (inst & 0xffffc00c) == 0x73c10008) |
| 3691 | save_sp = 0; |
| 3692 | |
| 3693 | /* Are we loading some register with an offset from the argument |
| 3694 | pointer? */ |
| 3695 | if ((inst & 0xffe00000) == 0x37a00000 |
| 3696 | || (inst & 0xffffffe0) == 0x081d0240) |
| 3697 | { |
| 3698 | pc += 4; |
| 3699 | continue; |
| 3700 | } |
| 3701 | |
| 3702 | /* Account for general and floating-point register saves. */ |
| 3703 | reg_num = inst_saves_gr (inst); |
| 3704 | save_gr &= ~(1 << reg_num); |
| 3705 | |
| 3706 | /* Ugh. Also account for argument stores into the stack. |
| 3707 | Unfortunately args_stored only tells us that some arguments |
| 3708 | where stored into the stack. Not how many or what kind! |
| 3709 | |
| 3710 | This is a kludge as on the HP compiler sets this bit and it |
| 3711 | never does prologue scheduling. So once we see one, skip past |
| 3712 | all of them. We have similar code for the fp arg stores below. |
| 3713 | |
| 3714 | FIXME. Can still die if we have a mix of GR and FR argument |
| 3715 | stores! */ |
| 3716 | if (reg_num >= (TARGET_PTR_BIT == 64 ? 19 : 23) && reg_num <= 26) |
| 3717 | { |
| 3718 | while (reg_num >= (TARGET_PTR_BIT == 64 ? 19 : 23) && reg_num <= 26) |
| 3719 | { |
| 3720 | pc += 4; |
| 3721 | status = target_read_memory (pc, buf, 4); |
| 3722 | inst = extract_unsigned_integer (buf, 4); |
| 3723 | if (status != 0) |
| 3724 | return pc; |
| 3725 | reg_num = inst_saves_gr (inst); |
| 3726 | } |
| 3727 | args_stored = 0; |
| 3728 | continue; |
| 3729 | } |
| 3730 | |
| 3731 | reg_num = inst_saves_fr (inst); |
| 3732 | save_fr &= ~(1 << reg_num); |
| 3733 | |
| 3734 | status = target_read_memory (pc + 4, buf, 4); |
| 3735 | next_inst = extract_unsigned_integer (buf, 4); |
| 3736 | |
| 3737 | /* Yow! */ |
| 3738 | if (status != 0) |
| 3739 | return pc; |
| 3740 | |
| 3741 | /* We've got to be read to handle the ldo before the fp register |
| 3742 | save. */ |
| 3743 | if ((inst & 0xfc000000) == 0x34000000 |
| 3744 | && inst_saves_fr (next_inst) >= 4 |
| 3745 | && inst_saves_fr (next_inst) <= (TARGET_PTR_BIT == 64 ? 11 : 7)) |
| 3746 | { |
| 3747 | /* So we drop into the code below in a reasonable state. */ |
| 3748 | reg_num = inst_saves_fr (next_inst); |
| 3749 | pc -= 4; |
| 3750 | } |
| 3751 | |
| 3752 | /* Ugh. Also account for argument stores into the stack. |
| 3753 | This is a kludge as on the HP compiler sets this bit and it |
| 3754 | never does prologue scheduling. So once we see one, skip past |
| 3755 | all of them. */ |
| 3756 | if (reg_num >= 4 && reg_num <= (TARGET_PTR_BIT == 64 ? 11 : 7)) |
| 3757 | { |
| 3758 | while (reg_num >= 4 && reg_num <= (TARGET_PTR_BIT == 64 ? 11 : 7)) |
| 3759 | { |
| 3760 | pc += 8; |
| 3761 | status = target_read_memory (pc, buf, 4); |
| 3762 | inst = extract_unsigned_integer (buf, 4); |
| 3763 | if (status != 0) |
| 3764 | return pc; |
| 3765 | if ((inst & 0xfc000000) != 0x34000000) |
| 3766 | break; |
| 3767 | status = target_read_memory (pc + 4, buf, 4); |
| 3768 | next_inst = extract_unsigned_integer (buf, 4); |
| 3769 | if (status != 0) |
| 3770 | return pc; |
| 3771 | reg_num = inst_saves_fr (next_inst); |
| 3772 | } |
| 3773 | args_stored = 0; |
| 3774 | continue; |
| 3775 | } |
| 3776 | |
| 3777 | /* Quit if we hit any kind of branch. This can happen if a prologue |
| 3778 | instruction is in the delay slot of the first call/branch. */ |
| 3779 | if (is_branch (inst)) |
| 3780 | break; |
| 3781 | |
| 3782 | /* What a crock. The HP compilers set args_stored even if no |
| 3783 | arguments were stored into the stack (boo hiss). This could |
| 3784 | cause this code to then skip a bunch of user insns (up to the |
| 3785 | first branch). |
| 3786 | |
| 3787 | To combat this we try to identify when args_stored was bogusly |
| 3788 | set and clear it. We only do this when args_stored is nonzero, |
| 3789 | all other resources are accounted for, and nothing changed on |
| 3790 | this pass. */ |
| 3791 | if (args_stored |
| 3792 | && !(save_gr || save_fr || save_rp || save_sp || stack_remaining > 0) |
| 3793 | && old_save_gr == save_gr && old_save_fr == save_fr |
| 3794 | && old_save_rp == save_rp && old_save_sp == save_sp |
| 3795 | && old_stack_remaining == stack_remaining) |
| 3796 | break; |
| 3797 | |
| 3798 | /* Bump the PC. */ |
| 3799 | pc += 4; |
| 3800 | } |
| 3801 | |
| 3802 | /* We've got a tenative location for the end of the prologue. However |
| 3803 | because of limitations in the unwind descriptor mechanism we may |
| 3804 | have went too far into user code looking for the save of a register |
| 3805 | that does not exist. So, if there registers we expected to be saved |
| 3806 | but never were, mask them out and restart. |
| 3807 | |
| 3808 | This should only happen in optimized code, and should be very rare. */ |
| 3809 | if (save_gr || (save_fr && !(restart_fr || restart_gr))) |
| 3810 | { |
| 3811 | pc = orig_pc; |
| 3812 | restart_gr = save_gr; |
| 3813 | restart_fr = save_fr; |
| 3814 | goto restart; |
| 3815 | } |
| 3816 | |
| 3817 | return pc; |
| 3818 | } |
| 3819 | |
| 3820 | |
| 3821 | /* Return the address of the PC after the last prologue instruction if |
| 3822 | we can determine it from the debug symbols. Else return zero. */ |
| 3823 | |
| 3824 | static CORE_ADDR |
| 3825 | after_prologue (pc) |
| 3826 | CORE_ADDR pc; |
| 3827 | { |
| 3828 | struct symtab_and_line sal; |
| 3829 | CORE_ADDR func_addr, func_end; |
| 3830 | struct symbol *f; |
| 3831 | |
| 3832 | /* If we can not find the symbol in the partial symbol table, then |
| 3833 | there is no hope we can determine the function's start address |
| 3834 | with this code. */ |
| 3835 | if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end)) |
| 3836 | return 0; |
| 3837 | |
| 3838 | /* Get the line associated with FUNC_ADDR. */ |
| 3839 | sal = find_pc_line (func_addr, 0); |
| 3840 | |
| 3841 | /* There are only two cases to consider. First, the end of the source line |
| 3842 | is within the function bounds. In that case we return the end of the |
| 3843 | source line. Second is the end of the source line extends beyond the |
| 3844 | bounds of the current function. We need to use the slow code to |
| 3845 | examine instructions in that case. |
| 3846 | |
| 3847 | Anything else is simply a bug elsewhere. Fixing it here is absolutely |
| 3848 | the wrong thing to do. In fact, it should be entirely possible for this |
| 3849 | function to always return zero since the slow instruction scanning code |
| 3850 | is supposed to *always* work. If it does not, then it is a bug. */ |
| 3851 | if (sal.end < func_end) |
| 3852 | return sal.end; |
| 3853 | else |
| 3854 | return 0; |
| 3855 | } |
| 3856 | |
| 3857 | /* To skip prologues, I use this predicate. Returns either PC itself |
| 3858 | if the code at PC does not look like a function prologue; otherwise |
| 3859 | returns an address that (if we're lucky) follows the prologue. If |
| 3860 | LENIENT, then we must skip everything which is involved in setting |
| 3861 | up the frame (it's OK to skip more, just so long as we don't skip |
| 3862 | anything which might clobber the registers which are being saved. |
| 3863 | Currently we must not skip more on the alpha, but we might the lenient |
| 3864 | stuff some day. */ |
| 3865 | |
| 3866 | CORE_ADDR |
| 3867 | hppa_skip_prologue (pc) |
| 3868 | CORE_ADDR pc; |
| 3869 | { |
| 3870 | unsigned long inst; |
| 3871 | int offset; |
| 3872 | CORE_ADDR post_prologue_pc; |
| 3873 | char buf[4]; |
| 3874 | |
| 3875 | /* See if we can determine the end of the prologue via the symbol table. |
| 3876 | If so, then return either PC, or the PC after the prologue, whichever |
| 3877 | is greater. */ |
| 3878 | |
| 3879 | post_prologue_pc = after_prologue (pc); |
| 3880 | |
| 3881 | /* If after_prologue returned a useful address, then use it. Else |
| 3882 | fall back on the instruction skipping code. |
| 3883 | |
| 3884 | Some folks have claimed this causes problems because the breakpoint |
| 3885 | may be the first instruction of the prologue. If that happens, then |
| 3886 | the instruction skipping code has a bug that needs to be fixed. */ |
| 3887 | if (post_prologue_pc != 0) |
| 3888 | return max (pc, post_prologue_pc); |
| 3889 | else |
| 3890 | return (skip_prologue_hard_way (pc)); |
| 3891 | } |
| 3892 | |
| 3893 | /* Put here the code to store, into a struct frame_saved_regs, |
| 3894 | the addresses of the saved registers of frame described by FRAME_INFO. |
| 3895 | This includes special registers such as pc and fp saved in special |
| 3896 | ways in the stack frame. sp is even more special: |
| 3897 | the address we return for it IS the sp for the next frame. */ |
| 3898 | |
| 3899 | void |
| 3900 | hppa_frame_find_saved_regs (frame_info, frame_saved_regs) |
| 3901 | struct frame_info *frame_info; |
| 3902 | struct frame_saved_regs *frame_saved_regs; |
| 3903 | { |
| 3904 | CORE_ADDR pc; |
| 3905 | struct unwind_table_entry *u; |
| 3906 | unsigned long inst, stack_remaining, save_gr, save_fr, save_rp, save_sp; |
| 3907 | int status, i, reg; |
| 3908 | char buf[4]; |
| 3909 | int fp_loc = -1; |
| 3910 | int final_iteration; |
| 3911 | |
| 3912 | /* Zero out everything. */ |
| 3913 | memset (frame_saved_regs, '\0', sizeof (struct frame_saved_regs)); |
| 3914 | |
| 3915 | /* Call dummy frames always look the same, so there's no need to |
| 3916 | examine the dummy code to determine locations of saved registers; |
| 3917 | instead, let find_dummy_frame_regs fill in the correct offsets |
| 3918 | for the saved registers. */ |
| 3919 | if ((frame_info->pc >= frame_info->frame |
| 3920 | && frame_info->pc <= (frame_info->frame |
| 3921 | /* A call dummy is sized in words, but it is |
| 3922 | actually a series of instructions. Account |
| 3923 | for that scaling factor. */ |
| 3924 | + ((REGISTER_SIZE / INSTRUCTION_SIZE) |
| 3925 | * CALL_DUMMY_LENGTH) |
| 3926 | /* Similarly we have to account for 64bit |
| 3927 | wide register saves. */ |
| 3928 | + (32 * REGISTER_SIZE) |
| 3929 | /* We always consider FP regs 8 bytes long. */ |
| 3930 | + (NUM_REGS - FP0_REGNUM) * 8 |
| 3931 | /* Similarly we have to account for 64bit |
| 3932 | wide register saves. */ |
| 3933 | + (6 * REGISTER_SIZE)))) |
| 3934 | find_dummy_frame_regs (frame_info, frame_saved_regs); |
| 3935 | |
| 3936 | /* Interrupt handlers are special too. They lay out the register |
| 3937 | state in the exact same order as the register numbers in GDB. */ |
| 3938 | if (pc_in_interrupt_handler (frame_info->pc)) |
| 3939 | { |
| 3940 | for (i = 0; i < NUM_REGS; i++) |
| 3941 | { |
| 3942 | /* SP is a little special. */ |
| 3943 | if (i == SP_REGNUM) |
| 3944 | frame_saved_regs->regs[SP_REGNUM] |
| 3945 | = read_memory_integer (frame_info->frame + SP_REGNUM * 4, |
| 3946 | TARGET_PTR_BIT / 8); |
| 3947 | else |
| 3948 | frame_saved_regs->regs[i] = frame_info->frame + i * 4; |
| 3949 | } |
| 3950 | return; |
| 3951 | } |
| 3952 | |
| 3953 | #ifdef FRAME_FIND_SAVED_REGS_IN_SIGTRAMP |
| 3954 | /* Handle signal handler callers. */ |
| 3955 | if (frame_info->signal_handler_caller) |
| 3956 | { |
| 3957 | FRAME_FIND_SAVED_REGS_IN_SIGTRAMP (frame_info, frame_saved_regs); |
| 3958 | return; |
| 3959 | } |
| 3960 | #endif |
| 3961 | |
| 3962 | /* Get the starting address of the function referred to by the PC |
| 3963 | saved in frame. */ |
| 3964 | pc = get_pc_function_start (frame_info->pc); |
| 3965 | |
| 3966 | /* Yow! */ |
| 3967 | u = find_unwind_entry (pc); |
| 3968 | if (!u) |
| 3969 | return; |
| 3970 | |
| 3971 | /* This is how much of a frame adjustment we need to account for. */ |
| 3972 | stack_remaining = u->Total_frame_size << 3; |
| 3973 | |
| 3974 | /* Magic register saves we want to know about. */ |
| 3975 | save_rp = u->Save_RP; |
| 3976 | save_sp = u->Save_SP; |
| 3977 | |
| 3978 | /* Turn the Entry_GR field into a bitmask. */ |
| 3979 | save_gr = 0; |
| 3980 | for (i = 3; i < u->Entry_GR + 3; i++) |
| 3981 | { |
| 3982 | /* Frame pointer gets saved into a special location. */ |
| 3983 | if (u->Save_SP && i == FP_REGNUM) |
| 3984 | continue; |
| 3985 | |
| 3986 | save_gr |= (1 << i); |
| 3987 | } |
| 3988 | |
| 3989 | /* Turn the Entry_FR field into a bitmask too. */ |
| 3990 | save_fr = 0; |
| 3991 | for (i = 12; i < u->Entry_FR + 12; i++) |
| 3992 | save_fr |= (1 << i); |
| 3993 | |
| 3994 | /* The frame always represents the value of %sp at entry to the |
| 3995 | current function (and is thus equivalent to the "saved" stack |
| 3996 | pointer. */ |
| 3997 | frame_saved_regs->regs[SP_REGNUM] = frame_info->frame; |
| 3998 | |
| 3999 | /* Loop until we find everything of interest or hit a branch. |
| 4000 | |
| 4001 | For unoptimized GCC code and for any HP CC code this will never ever |
| 4002 | examine any user instructions. |
| 4003 | |
| 4004 | For optimized GCC code we're faced with problems. GCC will schedule |
| 4005 | its prologue and make prologue instructions available for delay slot |
| 4006 | filling. The end result is user code gets mixed in with the prologue |
| 4007 | and a prologue instruction may be in the delay slot of the first branch |
| 4008 | or call. |
| 4009 | |
| 4010 | Some unexpected things are expected with debugging optimized code, so |
| 4011 | we allow this routine to walk past user instructions in optimized |
| 4012 | GCC code. */ |
| 4013 | final_iteration = 0; |
| 4014 | while ((save_gr || save_fr || save_rp || save_sp || stack_remaining > 0) |
| 4015 | && pc <= frame_info->pc) |
| 4016 | { |
| 4017 | status = target_read_memory (pc, buf, 4); |
| 4018 | inst = extract_unsigned_integer (buf, 4); |
| 4019 | |
| 4020 | /* Yow! */ |
| 4021 | if (status != 0) |
| 4022 | return; |
| 4023 | |
| 4024 | /* Note the interesting effects of this instruction. */ |
| 4025 | stack_remaining -= prologue_inst_adjust_sp (inst); |
| 4026 | |
| 4027 | /* There are limited ways to store the return pointer into the |
| 4028 | stack. */ |
| 4029 | if (inst == 0x6bc23fd9) /* stw rp,-0x14(sr0,sp) */ |
| 4030 | { |
| 4031 | save_rp = 0; |
| 4032 | frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 20; |
| 4033 | } |
| 4034 | else if (inst == 0x0fc212c1) /* std rp,-0x10(sr0,sp) */ |
| 4035 | { |
| 4036 | save_rp = 0; |
| 4037 | frame_saved_regs->regs[RP_REGNUM] = frame_info->frame - 16; |
| 4038 | } |
| 4039 | |
| 4040 | /* Note if we saved SP into the stack. This also happens to indicate |
| 4041 | the location of the saved frame pointer. */ |
| 4042 | if ( (inst & 0xffffc000) == 0x6fc10000 /* stw,ma r1,N(sr0,sp) */ |
| 4043 | || (inst & 0xffffc00c) == 0x73c10008) /* std,ma r1,N(sr0,sp) */ |
| 4044 | { |
| 4045 | frame_saved_regs->regs[FP_REGNUM] = frame_info->frame; |
| 4046 | save_sp = 0; |
| 4047 | } |
| 4048 | |
| 4049 | /* Account for general and floating-point register saves. */ |
| 4050 | reg = inst_saves_gr (inst); |
| 4051 | if (reg >= 3 && reg <= 18 |
| 4052 | && (!u->Save_SP || reg != FP_REGNUM)) |
| 4053 | { |
| 4054 | save_gr &= ~(1 << reg); |
| 4055 | |
| 4056 | /* stwm with a positive displacement is a *post modify*. */ |
| 4057 | if ((inst >> 26) == 0x1b |
| 4058 | && extract_14 (inst) >= 0) |
| 4059 | frame_saved_regs->regs[reg] = frame_info->frame; |
| 4060 | /* A std has explicit post_modify forms. */ |
| 4061 | else if ((inst & 0xfc00000c0) == 0x70000008) |
| 4062 | frame_saved_regs->regs[reg] = frame_info->frame; |
| 4063 | else |
| 4064 | { |
| 4065 | CORE_ADDR offset; |
| 4066 | |
| 4067 | if ((inst >> 26) == 0x1c) |
| 4068 | offset = (inst & 0x1 ? -1 << 13 : 0) | (((inst >> 4) & 0x3ff) << 3); |
| 4069 | else if ((inst >> 26) == 0x03) |
| 4070 | offset = low_sign_extend (inst & 0x1f, 5); |
| 4071 | else |
| 4072 | offset = extract_14 (inst); |
| 4073 | |
| 4074 | /* Handle code with and without frame pointers. */ |
| 4075 | if (u->Save_SP) |
| 4076 | frame_saved_regs->regs[reg] |
| 4077 | = frame_info->frame + offset; |
| 4078 | else |
| 4079 | frame_saved_regs->regs[reg] |
| 4080 | = (frame_info->frame + (u->Total_frame_size << 3) |
| 4081 | + offset); |
| 4082 | } |
| 4083 | } |
| 4084 | |
| 4085 | |
| 4086 | /* GCC handles callee saved FP regs a little differently. |
| 4087 | |
| 4088 | It emits an instruction to put the value of the start of |
| 4089 | the FP store area into %r1. It then uses fstds,ma with |
| 4090 | a basereg of %r1 for the stores. |
| 4091 | |
| 4092 | HP CC emits them at the current stack pointer modifying |
| 4093 | the stack pointer as it stores each register. */ |
| 4094 | |
| 4095 | /* ldo X(%r3),%r1 or ldo X(%r30),%r1. */ |
| 4096 | if ((inst & 0xffffc000) == 0x34610000 |
| 4097 | || (inst & 0xffffc000) == 0x37c10000) |
| 4098 | fp_loc = extract_14 (inst); |
| 4099 | |
| 4100 | reg = inst_saves_fr (inst); |
| 4101 | if (reg >= 12 && reg <= 21) |
| 4102 | { |
| 4103 | /* Note +4 braindamage below is necessary because the FP status |
| 4104 | registers are internally 8 registers rather than the expected |
| 4105 | 4 registers. */ |
| 4106 | save_fr &= ~(1 << reg); |
| 4107 | if (fp_loc == -1) |
| 4108 | { |
| 4109 | /* 1st HP CC FP register store. After this instruction |
| 4110 | we've set enough state that the GCC and HPCC code are |
| 4111 | both handled in the same manner. */ |
| 4112 | frame_saved_regs->regs[reg + FP4_REGNUM + 4] = frame_info->frame; |
| 4113 | fp_loc = 8; |
| 4114 | } |
| 4115 | else |
| 4116 | { |
| 4117 | frame_saved_regs->regs[reg + FP0_REGNUM + 4] |
| 4118 | = frame_info->frame + fp_loc; |
| 4119 | fp_loc += 8; |
| 4120 | } |
| 4121 | } |
| 4122 | |
| 4123 | /* Quit if we hit any kind of branch the previous iteration. |
| 4124 | if (final_iteration) |
| 4125 | break; |
| 4126 | |
| 4127 | /* We want to look precisely one instruction beyond the branch |
| 4128 | if we have not found everything yet. */ |
| 4129 | if (is_branch (inst)) |
| 4130 | final_iteration = 1; |
| 4131 | |
| 4132 | /* Bump the PC. */ |
| 4133 | pc += 4; |
| 4134 | } |
| 4135 | } |
| 4136 | |
| 4137 | |
| 4138 | /* Exception handling support for the HP-UX ANSI C++ compiler. |
| 4139 | The compiler (aCC) provides a callback for exception events; |
| 4140 | GDB can set a breakpoint on this callback and find out what |
| 4141 | exception event has occurred. */ |
| 4142 | |
| 4143 | /* The name of the hook to be set to point to the callback function */ |
| 4144 | static char HP_ACC_EH_notify_hook[] = "__eh_notify_hook"; |
| 4145 | /* The name of the function to be used to set the hook value */ |
| 4146 | static char HP_ACC_EH_set_hook_value[] = "__eh_set_hook_value"; |
| 4147 | /* The name of the callback function in end.o */ |
| 4148 | static char HP_ACC_EH_notify_callback[] = "__d_eh_notify_callback"; |
| 4149 | /* Name of function in end.o on which a break is set (called by above) */ |
| 4150 | static char HP_ACC_EH_break[] = "__d_eh_break"; |
| 4151 | /* Name of flag (in end.o) that enables catching throws */ |
| 4152 | static char HP_ACC_EH_catch_throw[] = "__d_eh_catch_throw"; |
| 4153 | /* Name of flag (in end.o) that enables catching catching */ |
| 4154 | static char HP_ACC_EH_catch_catch[] = "__d_eh_catch_catch"; |
| 4155 | /* The enum used by aCC */ |
| 4156 | typedef enum |
| 4157 | { |
| 4158 | __EH_NOTIFY_THROW, |
| 4159 | __EH_NOTIFY_CATCH |
| 4160 | } |
| 4161 | __eh_notification; |
| 4162 | |
| 4163 | /* Is exception-handling support available with this executable? */ |
| 4164 | static int hp_cxx_exception_support = 0; |
| 4165 | /* Has the initialize function been run? */ |
| 4166 | int hp_cxx_exception_support_initialized = 0; |
| 4167 | /* Similar to above, but imported from breakpoint.c -- non-target-specific */ |
| 4168 | extern int exception_support_initialized; |
| 4169 | /* Address of __eh_notify_hook */ |
| 4170 | static CORE_ADDR eh_notify_hook_addr = 0; |
| 4171 | /* Address of __d_eh_notify_callback */ |
| 4172 | static CORE_ADDR eh_notify_callback_addr = 0; |
| 4173 | /* Address of __d_eh_break */ |
| 4174 | static CORE_ADDR eh_break_addr = 0; |
| 4175 | /* Address of __d_eh_catch_catch */ |
| 4176 | static CORE_ADDR eh_catch_catch_addr = 0; |
| 4177 | /* Address of __d_eh_catch_throw */ |
| 4178 | static CORE_ADDR eh_catch_throw_addr = 0; |
| 4179 | /* Sal for __d_eh_break */ |
| 4180 | static struct symtab_and_line *break_callback_sal = 0; |
| 4181 | |
| 4182 | /* Code in end.c expects __d_pid to be set in the inferior, |
| 4183 | otherwise __d_eh_notify_callback doesn't bother to call |
| 4184 | __d_eh_break! So we poke the pid into this symbol |
| 4185 | ourselves. |
| 4186 | 0 => success |
| 4187 | 1 => failure */ |
| 4188 | int |
| 4189 | setup_d_pid_in_inferior () |
| 4190 | { |
| 4191 | CORE_ADDR anaddr; |
| 4192 | struct minimal_symbol *msymbol; |
| 4193 | char buf[4]; /* FIXME 32x64? */ |
| 4194 | |
| 4195 | /* Slam the pid of the process into __d_pid; failing is only a warning! */ |
| 4196 | msymbol = lookup_minimal_symbol ("__d_pid", NULL, symfile_objfile); |
| 4197 | if (msymbol == NULL) |
| 4198 | { |
| 4199 | warning ("Unable to find __d_pid symbol in object file."); |
| 4200 | warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| 4201 | return 1; |
| 4202 | } |
| 4203 | |
| 4204 | anaddr = SYMBOL_VALUE_ADDRESS (msymbol); |
| 4205 | store_unsigned_integer (buf, 4, inferior_pid); /* FIXME 32x64? */ |
| 4206 | if (target_write_memory (anaddr, buf, 4)) /* FIXME 32x64? */ |
| 4207 | { |
| 4208 | warning ("Unable to write __d_pid"); |
| 4209 | warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| 4210 | return 1; |
| 4211 | } |
| 4212 | return 0; |
| 4213 | } |
| 4214 | |
| 4215 | /* Initialize exception catchpoint support by looking for the |
| 4216 | necessary hooks/callbacks in end.o, etc., and set the hook value to |
| 4217 | point to the required debug function |
| 4218 | |
| 4219 | Return 0 => failure |
| 4220 | 1 => success */ |
| 4221 | |
| 4222 | static int |
| 4223 | initialize_hp_cxx_exception_support () |
| 4224 | { |
| 4225 | struct symtabs_and_lines sals; |
| 4226 | struct cleanup *old_chain; |
| 4227 | struct cleanup *canonical_strings_chain = NULL; |
| 4228 | int i; |
| 4229 | char *addr_start; |
| 4230 | char *addr_end = NULL; |
| 4231 | char **canonical = (char **) NULL; |
| 4232 | int thread = -1; |
| 4233 | struct symbol *sym = NULL; |
| 4234 | struct minimal_symbol *msym = NULL; |
| 4235 | struct objfile *objfile; |
| 4236 | asection *shlib_info; |
| 4237 | |
| 4238 | /* Detect and disallow recursion. On HP-UX with aCC, infinite |
| 4239 | recursion is a possibility because finding the hook for exception |
| 4240 | callbacks involves making a call in the inferior, which means |
| 4241 | re-inserting breakpoints which can re-invoke this code */ |
| 4242 | |
| 4243 | static int recurse = 0; |
| 4244 | if (recurse > 0) |
| 4245 | { |
| 4246 | hp_cxx_exception_support_initialized = 0; |
| 4247 | exception_support_initialized = 0; |
| 4248 | return 0; |
| 4249 | } |
| 4250 | |
| 4251 | hp_cxx_exception_support = 0; |
| 4252 | |
| 4253 | /* First check if we have seen any HP compiled objects; if not, |
| 4254 | it is very unlikely that HP's idiosyncratic callback mechanism |
| 4255 | for exception handling debug support will be available! |
| 4256 | This will percolate back up to breakpoint.c, where our callers |
| 4257 | will decide to try the g++ exception-handling support instead. */ |
| 4258 | if (!hp_som_som_object_present) |
| 4259 | return 0; |
| 4260 | |
| 4261 | /* We have a SOM executable with SOM debug info; find the hooks */ |
| 4262 | |
| 4263 | /* First look for the notify hook provided by aCC runtime libs */ |
| 4264 | /* If we find this symbol, we conclude that the executable must |
| 4265 | have HP aCC exception support built in. If this symbol is not |
| 4266 | found, even though we're a HP SOM-SOM file, we may have been |
| 4267 | built with some other compiler (not aCC). This results percolates |
| 4268 | back up to our callers in breakpoint.c which can decide to |
| 4269 | try the g++ style of exception support instead. |
| 4270 | If this symbol is found but the other symbols we require are |
| 4271 | not found, there is something weird going on, and g++ support |
| 4272 | should *not* be tried as an alternative. |
| 4273 | |
| 4274 | ASSUMPTION: Only HP aCC code will have __eh_notify_hook defined. |
| 4275 | ASSUMPTION: HP aCC and g++ modules cannot be linked together. */ |
| 4276 | |
| 4277 | /* libCsup has this hook; it'll usually be non-debuggable */ |
| 4278 | msym = lookup_minimal_symbol (HP_ACC_EH_notify_hook, NULL, NULL); |
| 4279 | if (msym) |
| 4280 | { |
| 4281 | eh_notify_hook_addr = SYMBOL_VALUE_ADDRESS (msym); |
| 4282 | hp_cxx_exception_support = 1; |
| 4283 | } |
| 4284 | else |
| 4285 | { |
| 4286 | warning ("Unable to find exception callback hook (%s).", HP_ACC_EH_notify_hook); |
| 4287 | warning ("Executable may not have been compiled debuggable with HP aCC."); |
| 4288 | warning ("GDB will be unable to intercept exception events."); |
| 4289 | eh_notify_hook_addr = 0; |
| 4290 | hp_cxx_exception_support = 0; |
| 4291 | return 0; |
| 4292 | } |
| 4293 | |
| 4294 | /* Next look for the notify callback routine in end.o */ |
| 4295 | /* This is always available in the SOM symbol dictionary if end.o is linked in */ |
| 4296 | msym = lookup_minimal_symbol (HP_ACC_EH_notify_callback, NULL, NULL); |
| 4297 | if (msym) |
| 4298 | { |
| 4299 | eh_notify_callback_addr = SYMBOL_VALUE_ADDRESS (msym); |
| 4300 | hp_cxx_exception_support = 1; |
| 4301 | } |
| 4302 | else |
| 4303 | { |
| 4304 | warning ("Unable to find exception callback routine (%s).", HP_ACC_EH_notify_callback); |
| 4305 | warning ("Suggest linking executable with -g (links in /opt/langtools/lib/end.o)."); |
| 4306 | warning ("GDB will be unable to intercept exception events."); |
| 4307 | eh_notify_callback_addr = 0; |
| 4308 | return 0; |
| 4309 | } |
| 4310 | |
| 4311 | #ifndef GDB_TARGET_IS_HPPA_20W |
| 4312 | /* Check whether the executable is dynamically linked or archive bound */ |
| 4313 | /* With an archive-bound executable we can use the raw addresses we find |
| 4314 | for the callback function, etc. without modification. For an executable |
| 4315 | with shared libraries, we have to do more work to find the plabel, which |
| 4316 | can be the target of a call through $$dyncall from the aCC runtime support |
| 4317 | library (libCsup) which is linked shared by default by aCC. */ |
| 4318 | /* This test below was copied from somsolib.c/somread.c. It may not be a very |
| 4319 | reliable one to test that an executable is linked shared. pai/1997-07-18 */ |
| 4320 | shlib_info = bfd_get_section_by_name (symfile_objfile->obfd, "$SHLIB_INFO$"); |
| 4321 | if (shlib_info && (bfd_section_size (symfile_objfile->obfd, shlib_info) != 0)) |
| 4322 | { |
| 4323 | /* The minsym we have has the local code address, but that's not the |
| 4324 | plabel that can be used by an inter-load-module call. */ |
| 4325 | /* Find solib handle for main image (which has end.o), and use that |
| 4326 | and the min sym as arguments to __d_shl_get() (which does the equivalent |
| 4327 | of shl_findsym()) to find the plabel. */ |
| 4328 | |
| 4329 | args_for_find_stub args; |
| 4330 | static char message[] = "Error while finding exception callback hook:\n"; |
| 4331 | |
| 4332 | args.solib_handle = som_solib_get_solib_by_pc (eh_notify_callback_addr); |
| 4333 | args.msym = msym; |
| 4334 | args.return_val = 0; |
| 4335 | |
| 4336 | recurse++; |
| 4337 | catch_errors (cover_find_stub_with_shl_get, (PTR) &args, message, |
| 4338 | RETURN_MASK_ALL); |
| 4339 | eh_notify_callback_addr = args.return_val; |
| 4340 | recurse--; |
| 4341 | |
| 4342 | exception_catchpoints_are_fragile = 1; |
| 4343 | |
| 4344 | if (!eh_notify_callback_addr) |
| 4345 | { |
| 4346 | /* We can get here either if there is no plabel in the export list |
| 4347 | for the main image, or if something strange happened (??) */ |
| 4348 | warning ("Couldn't find a plabel (indirect function label) for the exception callback."); |
| 4349 | warning ("GDB will not be able to intercept exception events."); |
| 4350 | return 0; |
| 4351 | } |
| 4352 | } |
| 4353 | else |
| 4354 | exception_catchpoints_are_fragile = 0; |
| 4355 | #endif |
| 4356 | |
| 4357 | /* Now, look for the breakpointable routine in end.o */ |
| 4358 | /* This should also be available in the SOM symbol dict. if end.o linked in */ |
| 4359 | msym = lookup_minimal_symbol (HP_ACC_EH_break, NULL, NULL); |
| 4360 | if (msym) |
| 4361 | { |
| 4362 | eh_break_addr = SYMBOL_VALUE_ADDRESS (msym); |
| 4363 | hp_cxx_exception_support = 1; |
| 4364 | } |
| 4365 | else |
| 4366 | { |
| 4367 | warning ("Unable to find exception callback routine to set breakpoint (%s).", HP_ACC_EH_break); |
| 4368 | warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| 4369 | warning ("GDB will be unable to intercept exception events."); |
| 4370 | eh_break_addr = 0; |
| 4371 | return 0; |
| 4372 | } |
| 4373 | |
| 4374 | /* Next look for the catch enable flag provided in end.o */ |
| 4375 | sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL, |
| 4376 | VAR_NAMESPACE, 0, (struct symtab **) NULL); |
| 4377 | if (sym) /* sometimes present in debug info */ |
| 4378 | { |
| 4379 | eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (sym); |
| 4380 | hp_cxx_exception_support = 1; |
| 4381 | } |
| 4382 | else |
| 4383 | /* otherwise look in SOM symbol dict. */ |
| 4384 | { |
| 4385 | msym = lookup_minimal_symbol (HP_ACC_EH_catch_catch, NULL, NULL); |
| 4386 | if (msym) |
| 4387 | { |
| 4388 | eh_catch_catch_addr = SYMBOL_VALUE_ADDRESS (msym); |
| 4389 | hp_cxx_exception_support = 1; |
| 4390 | } |
| 4391 | else |
| 4392 | { |
| 4393 | warning ("Unable to enable interception of exception catches."); |
| 4394 | warning ("Executable may not have been compiled debuggable with HP aCC."); |
| 4395 | warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| 4396 | return 0; |
| 4397 | } |
| 4398 | } |
| 4399 | |
| 4400 | /* Next look for the catch enable flag provided end.o */ |
| 4401 | sym = lookup_symbol (HP_ACC_EH_catch_catch, (struct block *) NULL, |
| 4402 | VAR_NAMESPACE, 0, (struct symtab **) NULL); |
| 4403 | if (sym) /* sometimes present in debug info */ |
| 4404 | { |
| 4405 | eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (sym); |
| 4406 | hp_cxx_exception_support = 1; |
| 4407 | } |
| 4408 | else |
| 4409 | /* otherwise look in SOM symbol dict. */ |
| 4410 | { |
| 4411 | msym = lookup_minimal_symbol (HP_ACC_EH_catch_throw, NULL, NULL); |
| 4412 | if (msym) |
| 4413 | { |
| 4414 | eh_catch_throw_addr = SYMBOL_VALUE_ADDRESS (msym); |
| 4415 | hp_cxx_exception_support = 1; |
| 4416 | } |
| 4417 | else |
| 4418 | { |
| 4419 | warning ("Unable to enable interception of exception throws."); |
| 4420 | warning ("Executable may not have been compiled debuggable with HP aCC."); |
| 4421 | warning ("Suggest linking executable with -g (link in /opt/langtools/lib/end.o)."); |
| 4422 | return 0; |
| 4423 | } |
| 4424 | } |
| 4425 | |
| 4426 | /* Set the flags */ |
| 4427 | hp_cxx_exception_support = 2; /* everything worked so far */ |
| 4428 | hp_cxx_exception_support_initialized = 1; |
| 4429 | exception_support_initialized = 1; |
| 4430 | |
| 4431 | return 1; |
| 4432 | } |
| 4433 | |
| 4434 | /* Target operation for enabling or disabling interception of |
| 4435 | exception events. |
| 4436 | KIND is either EX_EVENT_THROW or EX_EVENT_CATCH |
| 4437 | ENABLE is either 0 (disable) or 1 (enable). |
| 4438 | Return value is NULL if no support found; |
| 4439 | -1 if something went wrong, |
| 4440 | or a pointer to a symtab/line struct if the breakpointable |
| 4441 | address was found. */ |
| 4442 | |
| 4443 | struct symtab_and_line * |
| 4444 | child_enable_exception_callback (kind, enable) |
| 4445 | enum exception_event_kind kind; |
| 4446 | int enable; |
| 4447 | { |
| 4448 | char buf[4]; |
| 4449 | |
| 4450 | if (!exception_support_initialized || !hp_cxx_exception_support_initialized) |
| 4451 | if (!initialize_hp_cxx_exception_support ()) |
| 4452 | return NULL; |
| 4453 | |
| 4454 | switch (hp_cxx_exception_support) |
| 4455 | { |
| 4456 | case 0: |
| 4457 | /* Assuming no HP support at all */ |
| 4458 | return NULL; |
| 4459 | case 1: |
| 4460 | /* HP support should be present, but something went wrong */ |
| 4461 | return (struct symtab_and_line *) -1; /* yuck! */ |
| 4462 | /* there may be other cases in the future */ |
| 4463 | } |
| 4464 | |
| 4465 | /* Set the EH hook to point to the callback routine */ |
| 4466 | store_unsigned_integer (buf, 4, enable ? eh_notify_callback_addr : 0); /* FIXME 32x64 problem */ |
| 4467 | /* pai: (temp) FIXME should there be a pack operation first? */ |
| 4468 | if (target_write_memory (eh_notify_hook_addr, buf, 4)) /* FIXME 32x64 problem */ |
| 4469 | { |
| 4470 | warning ("Could not write to target memory for exception event callback."); |
| 4471 | warning ("Interception of exception events may not work."); |
| 4472 | return (struct symtab_and_line *) -1; |
| 4473 | } |
| 4474 | if (enable) |
| 4475 | { |
| 4476 | /* Ensure that __d_pid is set up correctly -- end.c code checks this. :-( */ |
| 4477 | if (inferior_pid > 0) |
| 4478 | { |
| 4479 | if (setup_d_pid_in_inferior ()) |
| 4480 | return (struct symtab_and_line *) -1; |
| 4481 | } |
| 4482 | else |
| 4483 | { |
| 4484 | warning ("Internal error: Invalid inferior pid? Cannot intercept exception events."); |
| 4485 | return (struct symtab_and_line *) -1; |
| 4486 | } |
| 4487 | } |
| 4488 | |
| 4489 | switch (kind) |
| 4490 | { |
| 4491 | case EX_EVENT_THROW: |
| 4492 | store_unsigned_integer (buf, 4, enable ? 1 : 0); |
| 4493 | if (target_write_memory (eh_catch_throw_addr, buf, 4)) /* FIXME 32x64? */ |
| 4494 | { |
| 4495 | warning ("Couldn't enable exception throw interception."); |
| 4496 | return (struct symtab_and_line *) -1; |
| 4497 | } |
| 4498 | break; |
| 4499 | case EX_EVENT_CATCH: |
| 4500 | store_unsigned_integer (buf, 4, enable ? 1 : 0); |
| 4501 | if (target_write_memory (eh_catch_catch_addr, buf, 4)) /* FIXME 32x64? */ |
| 4502 | { |
| 4503 | warning ("Couldn't enable exception catch interception."); |
| 4504 | return (struct symtab_and_line *) -1; |
| 4505 | } |
| 4506 | break; |
| 4507 | default: |
| 4508 | error ("Request to enable unknown or unsupported exception event."); |
| 4509 | } |
| 4510 | |
| 4511 | /* Copy break address into new sal struct, malloc'ing if needed. */ |
| 4512 | if (!break_callback_sal) |
| 4513 | { |
| 4514 | break_callback_sal = (struct symtab_and_line *) xmalloc (sizeof (struct symtab_and_line)); |
| 4515 | } |
| 4516 | INIT_SAL (break_callback_sal); |
| 4517 | break_callback_sal->symtab = NULL; |
| 4518 | break_callback_sal->pc = eh_break_addr; |
| 4519 | break_callback_sal->line = 0; |
| 4520 | break_callback_sal->end = eh_break_addr; |
| 4521 | |
| 4522 | return break_callback_sal; |
| 4523 | } |
| 4524 | |
| 4525 | /* Record some information about the current exception event */ |
| 4526 | static struct exception_event_record current_ex_event; |
| 4527 | /* Convenience struct */ |
| 4528 | static struct symtab_and_line null_symtab_and_line = |
| 4529 | {NULL, 0, 0, 0}; |
| 4530 | |
| 4531 | /* Report current exception event. Returns a pointer to a record |
| 4532 | that describes the kind of the event, where it was thrown from, |
| 4533 | and where it will be caught. More information may be reported |
| 4534 | in the future */ |
| 4535 | struct exception_event_record * |
| 4536 | child_get_current_exception_event () |
| 4537 | { |
| 4538 | CORE_ADDR event_kind; |
| 4539 | CORE_ADDR throw_addr; |
| 4540 | CORE_ADDR catch_addr; |
| 4541 | struct frame_info *fi, *curr_frame; |
| 4542 | int level = 1; |
| 4543 | |
| 4544 | curr_frame = get_current_frame (); |
| 4545 | if (!curr_frame) |
| 4546 | return (struct exception_event_record *) NULL; |
| 4547 | |
| 4548 | /* Go up one frame to __d_eh_notify_callback, because at the |
| 4549 | point when this code is executed, there's garbage in the |
| 4550 | arguments of __d_eh_break. */ |
| 4551 | fi = find_relative_frame (curr_frame, &level); |
| 4552 | if (level != 0) |
| 4553 | return (struct exception_event_record *) NULL; |
| 4554 | |
| 4555 | select_frame (fi, -1); |
| 4556 | |
| 4557 | /* Read in the arguments */ |
| 4558 | /* __d_eh_notify_callback() is called with 3 arguments: |
| 4559 | 1. event kind catch or throw |
| 4560 | 2. the target address if known |
| 4561 | 3. a flag -- not sure what this is. pai/1997-07-17 */ |
| 4562 | event_kind = read_register (ARG0_REGNUM); |
| 4563 | catch_addr = read_register (ARG1_REGNUM); |
| 4564 | |
| 4565 | /* Now go down to a user frame */ |
| 4566 | /* For a throw, __d_eh_break is called by |
| 4567 | __d_eh_notify_callback which is called by |
| 4568 | __notify_throw which is called |
| 4569 | from user code. |
| 4570 | For a catch, __d_eh_break is called by |
| 4571 | __d_eh_notify_callback which is called by |
| 4572 | <stackwalking stuff> which is called by |
| 4573 | __throw__<stuff> or __rethrow_<stuff> which is called |
| 4574 | from user code. */ |
| 4575 | /* FIXME: Don't use such magic numbers; search for the frames */ |
| 4576 | level = (event_kind == EX_EVENT_THROW) ? 3 : 4; |
| 4577 | fi = find_relative_frame (curr_frame, &level); |
| 4578 | if (level != 0) |
| 4579 | return (struct exception_event_record *) NULL; |
| 4580 | |
| 4581 | select_frame (fi, -1); |
| 4582 | throw_addr = fi->pc; |
| 4583 | |
| 4584 | /* Go back to original (top) frame */ |
| 4585 | select_frame (curr_frame, -1); |
| 4586 | |
| 4587 | current_ex_event.kind = (enum exception_event_kind) event_kind; |
| 4588 | current_ex_event.throw_sal = find_pc_line (throw_addr, 1); |
| 4589 | current_ex_event.catch_sal = find_pc_line (catch_addr, 1); |
| 4590 | |
| 4591 | return ¤t_ex_event; |
| 4592 | } |
| 4593 | |
| 4594 | static void |
| 4595 | unwind_command (exp, from_tty) |
| 4596 | char *exp; |
| 4597 | int from_tty; |
| 4598 | { |
| 4599 | CORE_ADDR address; |
| 4600 | struct unwind_table_entry *u; |
| 4601 | |
| 4602 | /* If we have an expression, evaluate it and use it as the address. */ |
| 4603 | |
| 4604 | if (exp != 0 && *exp != 0) |
| 4605 | address = parse_and_eval_address (exp); |
| 4606 | else |
| 4607 | return; |
| 4608 | |
| 4609 | u = find_unwind_entry (address); |
| 4610 | |
| 4611 | if (!u) |
| 4612 | { |
| 4613 | printf_unfiltered ("Can't find unwind table entry for %s\n", exp); |
| 4614 | return; |
| 4615 | } |
| 4616 | |
| 4617 | printf_unfiltered ("unwind_table_entry (0x%x):\n", u); |
| 4618 | |
| 4619 | printf_unfiltered ("\tregion_start = "); |
| 4620 | print_address (u->region_start, gdb_stdout); |
| 4621 | |
| 4622 | printf_unfiltered ("\n\tregion_end = "); |
| 4623 | print_address (u->region_end, gdb_stdout); |
| 4624 | |
| 4625 | #ifdef __STDC__ |
| 4626 | #define pif(FLD) if (u->FLD) printf_unfiltered (" "#FLD); |
| 4627 | #else |
| 4628 | #define pif(FLD) if (u->FLD) printf_unfiltered (" FLD"); |
| 4629 | #endif |
| 4630 | |
| 4631 | printf_unfiltered ("\n\tflags ="); |
| 4632 | pif (Cannot_unwind); |
| 4633 | pif (Millicode); |
| 4634 | pif (Millicode_save_sr0); |
| 4635 | pif (Entry_SR); |
| 4636 | pif (Args_stored); |
| 4637 | pif (Variable_Frame); |
| 4638 | pif (Separate_Package_Body); |
| 4639 | pif (Frame_Extension_Millicode); |
| 4640 | pif (Stack_Overflow_Check); |
| 4641 | pif (Two_Instruction_SP_Increment); |
| 4642 | pif (Ada_Region); |
| 4643 | pif (Save_SP); |
| 4644 | pif (Save_RP); |
| 4645 | pif (Save_MRP_in_frame); |
| 4646 | pif (extn_ptr_defined); |
| 4647 | pif (Cleanup_defined); |
| 4648 | pif (MPE_XL_interrupt_marker); |
| 4649 | pif (HP_UX_interrupt_marker); |
| 4650 | pif (Large_frame); |
| 4651 | |
| 4652 | putchar_unfiltered ('\n'); |
| 4653 | |
| 4654 | #ifdef __STDC__ |
| 4655 | #define pin(FLD) printf_unfiltered ("\t"#FLD" = 0x%x\n", u->FLD); |
| 4656 | #else |
| 4657 | #define pin(FLD) printf_unfiltered ("\tFLD = 0x%x\n", u->FLD); |
| 4658 | #endif |
| 4659 | |
| 4660 | pin (Region_description); |
| 4661 | pin (Entry_FR); |
| 4662 | pin (Entry_GR); |
| 4663 | pin (Total_frame_size); |
| 4664 | } |
| 4665 | |
| 4666 | #ifdef PREPARE_TO_PROCEED |
| 4667 | |
| 4668 | /* If the user has switched threads, and there is a breakpoint |
| 4669 | at the old thread's pc location, then switch to that thread |
| 4670 | and return TRUE, else return FALSE and don't do a thread |
| 4671 | switch (or rather, don't seem to have done a thread switch). |
| 4672 | |
| 4673 | Ptrace-based gdb will always return FALSE to the thread-switch |
| 4674 | query, and thus also to PREPARE_TO_PROCEED. |
| 4675 | |
| 4676 | The important thing is whether there is a BPT instruction, |
| 4677 | not how many user breakpoints there are. So we have to worry |
| 4678 | about things like these: |
| 4679 | |
| 4680 | o Non-bp stop -- NO |
| 4681 | |
| 4682 | o User hits bp, no switch -- NO |
| 4683 | |
| 4684 | o User hits bp, switches threads -- YES |
| 4685 | |
| 4686 | o User hits bp, deletes bp, switches threads -- NO |
| 4687 | |
| 4688 | o User hits bp, deletes one of two or more bps |
| 4689 | at that PC, user switches threads -- YES |
| 4690 | |
| 4691 | o Plus, since we're buffering events, the user may have hit a |
| 4692 | breakpoint, deleted the breakpoint and then gotten another |
| 4693 | hit on that same breakpoint on another thread which |
| 4694 | actually hit before the delete. (FIXME in breakpoint.c |
| 4695 | so that "dead" breakpoints are ignored?) -- NO |
| 4696 | |
| 4697 | For these reasons, we have to violate information hiding and |
| 4698 | call "breakpoint_here_p". If core gdb thinks there is a bpt |
| 4699 | here, that's what counts, as core gdb is the one which is |
| 4700 | putting the BPT instruction in and taking it out. */ |
| 4701 | int |
| 4702 | hppa_prepare_to_proceed () |
| 4703 | { |
| 4704 | pid_t old_thread; |
| 4705 | pid_t current_thread; |
| 4706 | |
| 4707 | old_thread = hppa_switched_threads (inferior_pid); |
| 4708 | if (old_thread != 0) |
| 4709 | { |
| 4710 | /* Switched over from "old_thread". Try to do |
| 4711 | as little work as possible, 'cause mostly |
| 4712 | we're going to switch back. */ |
| 4713 | CORE_ADDR new_pc; |
| 4714 | CORE_ADDR old_pc = read_pc (); |
| 4715 | |
| 4716 | /* Yuk, shouldn't use global to specify current |
| 4717 | thread. But that's how gdb does it. */ |
| 4718 | current_thread = inferior_pid; |
| 4719 | inferior_pid = old_thread; |
| 4720 | |
| 4721 | new_pc = read_pc (); |
| 4722 | if (new_pc != old_pc /* If at same pc, no need */ |
| 4723 | && breakpoint_here_p (new_pc)) |
| 4724 | { |
| 4725 | /* User hasn't deleted the BP. |
| 4726 | Return TRUE, finishing switch to "old_thread". */ |
| 4727 | flush_cached_frames (); |
| 4728 | registers_changed (); |
| 4729 | #if 0 |
| 4730 | printf ("---> PREPARE_TO_PROCEED (was %d, now %d)!\n", |
| 4731 | current_thread, inferior_pid); |
| 4732 | #endif |
| 4733 | |
| 4734 | return 1; |
| 4735 | } |
| 4736 | |
| 4737 | /* Otherwise switch back to the user-chosen thread. */ |
| 4738 | inferior_pid = current_thread; |
| 4739 | new_pc = read_pc (); /* Re-prime register cache */ |
| 4740 | } |
| 4741 | |
| 4742 | return 0; |
| 4743 | } |
| 4744 | #endif /* PREPARE_TO_PROCEED */ |
| 4745 | |
| 4746 | void |
| 4747 | hppa_skip_permanent_breakpoint () |
| 4748 | { |
| 4749 | /* To step over a breakpoint instruction on the PA takes some |
| 4750 | fiddling with the instruction address queue. |
| 4751 | |
| 4752 | When we stop at a breakpoint, the IA queue front (the instruction |
| 4753 | we're executing now) points at the breakpoint instruction, and |
| 4754 | the IA queue back (the next instruction to execute) points to |
| 4755 | whatever instruction we would execute after the breakpoint, if it |
| 4756 | were an ordinary instruction. This is the case even if the |
| 4757 | breakpoint is in the delay slot of a branch instruction. |
| 4758 | |
| 4759 | Clearly, to step past the breakpoint, we need to set the queue |
| 4760 | front to the back. But what do we put in the back? What |
| 4761 | instruction comes after that one? Because of the branch delay |
| 4762 | slot, the next insn is always at the back + 4. */ |
| 4763 | write_register (PCOQ_HEAD_REGNUM, read_register (PCOQ_TAIL_REGNUM)); |
| 4764 | write_register (PCSQ_HEAD_REGNUM, read_register (PCSQ_TAIL_REGNUM)); |
| 4765 | |
| 4766 | write_register (PCOQ_TAIL_REGNUM, read_register (PCOQ_TAIL_REGNUM) + 4); |
| 4767 | /* We can leave the tail's space the same, since there's no jump. */ |
| 4768 | } |
| 4769 | |
| 4770 | void |
| 4771 | _initialize_hppa_tdep () |
| 4772 | { |
| 4773 | tm_print_insn = print_insn_hppa; |
| 4774 | |
| 4775 | add_cmd ("unwind", class_maintenance, unwind_command, |
| 4776 | "Print unwind table entry at given address.", |
| 4777 | &maintenanceprintlist); |
| 4778 | } |