| 1 | /* Interface between GDB and target environments, including files and processes |
| 2 | |
| 3 | Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, |
| 4 | 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. |
| 5 | |
| 6 | Contributed by Cygnus Support. Written by John Gilmore. |
| 7 | |
| 8 | This file is part of GDB. |
| 9 | |
| 10 | This program is free software; you can redistribute it and/or modify |
| 11 | it under the terms of the GNU General Public License as published by |
| 12 | the Free Software Foundation; either version 2 of the License, or |
| 13 | (at your option) any later version. |
| 14 | |
| 15 | This program is distributed in the hope that it will be useful, |
| 16 | but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 17 | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 18 | GNU General Public License for more details. |
| 19 | |
| 20 | You should have received a copy of the GNU General Public License |
| 21 | along with this program; if not, write to the Free Software |
| 22 | Foundation, Inc., 59 Temple Place - Suite 330, |
| 23 | Boston, MA 02111-1307, USA. */ |
| 24 | |
| 25 | #if !defined (TARGET_H) |
| 26 | #define TARGET_H |
| 27 | |
| 28 | struct objfile; |
| 29 | struct ui_file; |
| 30 | struct mem_attrib; |
| 31 | struct target_ops; |
| 32 | |
| 33 | /* This include file defines the interface between the main part |
| 34 | of the debugger, and the part which is target-specific, or |
| 35 | specific to the communications interface between us and the |
| 36 | target. |
| 37 | |
| 38 | A TARGET is an interface between the debugger and a particular |
| 39 | kind of file or process. Targets can be STACKED in STRATA, |
| 40 | so that more than one target can potentially respond to a request. |
| 41 | In particular, memory accesses will walk down the stack of targets |
| 42 | until they find a target that is interested in handling that particular |
| 43 | address. STRATA are artificial boundaries on the stack, within |
| 44 | which particular kinds of targets live. Strata exist so that |
| 45 | people don't get confused by pushing e.g. a process target and then |
| 46 | a file target, and wondering why they can't see the current values |
| 47 | of variables any more (the file target is handling them and they |
| 48 | never get to the process target). So when you push a file target, |
| 49 | it goes into the file stratum, which is always below the process |
| 50 | stratum. */ |
| 51 | |
| 52 | #include "bfd.h" |
| 53 | #include "symtab.h" |
| 54 | #include "dcache.h" |
| 55 | #include "memattr.h" |
| 56 | |
| 57 | enum strata |
| 58 | { |
| 59 | dummy_stratum, /* The lowest of the low */ |
| 60 | file_stratum, /* Executable files, etc */ |
| 61 | core_stratum, /* Core dump files */ |
| 62 | download_stratum, /* Downloading of remote targets */ |
| 63 | process_stratum, /* Executing processes */ |
| 64 | thread_stratum /* Executing threads */ |
| 65 | }; |
| 66 | |
| 67 | enum thread_control_capabilities |
| 68 | { |
| 69 | tc_none = 0, /* Default: can't control thread execution. */ |
| 70 | tc_schedlock = 1, /* Can lock the thread scheduler. */ |
| 71 | tc_switch = 2 /* Can switch the running thread on demand. */ |
| 72 | }; |
| 73 | |
| 74 | /* Stuff for target_wait. */ |
| 75 | |
| 76 | /* Generally, what has the program done? */ |
| 77 | enum target_waitkind |
| 78 | { |
| 79 | /* The program has exited. The exit status is in value.integer. */ |
| 80 | TARGET_WAITKIND_EXITED, |
| 81 | |
| 82 | /* The program has stopped with a signal. Which signal is in |
| 83 | value.sig. */ |
| 84 | TARGET_WAITKIND_STOPPED, |
| 85 | |
| 86 | /* The program has terminated with a signal. Which signal is in |
| 87 | value.sig. */ |
| 88 | TARGET_WAITKIND_SIGNALLED, |
| 89 | |
| 90 | /* The program is letting us know that it dynamically loaded something |
| 91 | (e.g. it called load(2) on AIX). */ |
| 92 | TARGET_WAITKIND_LOADED, |
| 93 | |
| 94 | /* The program has forked. A "related" process' ID is in |
| 95 | value.related_pid. I.e., if the child forks, value.related_pid |
| 96 | is the parent's ID. */ |
| 97 | |
| 98 | TARGET_WAITKIND_FORKED, |
| 99 | |
| 100 | /* The program has vforked. A "related" process's ID is in |
| 101 | value.related_pid. */ |
| 102 | |
| 103 | TARGET_WAITKIND_VFORKED, |
| 104 | |
| 105 | /* The program has exec'ed a new executable file. The new file's |
| 106 | pathname is pointed to by value.execd_pathname. */ |
| 107 | |
| 108 | TARGET_WAITKIND_EXECD, |
| 109 | |
| 110 | /* The program has entered or returned from a system call. On |
| 111 | HP-UX, this is used in the hardware watchpoint implementation. |
| 112 | The syscall's unique integer ID number is in value.syscall_id */ |
| 113 | |
| 114 | TARGET_WAITKIND_SYSCALL_ENTRY, |
| 115 | TARGET_WAITKIND_SYSCALL_RETURN, |
| 116 | |
| 117 | /* Nothing happened, but we stopped anyway. This perhaps should be handled |
| 118 | within target_wait, but I'm not sure target_wait should be resuming the |
| 119 | inferior. */ |
| 120 | TARGET_WAITKIND_SPURIOUS, |
| 121 | |
| 122 | /* An event has occured, but we should wait again. |
| 123 | Remote_async_wait() returns this when there is an event |
| 124 | on the inferior, but the rest of the world is not interested in |
| 125 | it. The inferior has not stopped, but has just sent some output |
| 126 | to the console, for instance. In this case, we want to go back |
| 127 | to the event loop and wait there for another event from the |
| 128 | inferior, rather than being stuck in the remote_async_wait() |
| 129 | function. This way the event loop is responsive to other events, |
| 130 | like for instance the user typing. */ |
| 131 | TARGET_WAITKIND_IGNORE |
| 132 | }; |
| 133 | |
| 134 | struct target_waitstatus |
| 135 | { |
| 136 | enum target_waitkind kind; |
| 137 | |
| 138 | /* Forked child pid, execd pathname, exit status or signal number. */ |
| 139 | union |
| 140 | { |
| 141 | int integer; |
| 142 | enum target_signal sig; |
| 143 | int related_pid; |
| 144 | char *execd_pathname; |
| 145 | int syscall_id; |
| 146 | } |
| 147 | value; |
| 148 | }; |
| 149 | |
| 150 | /* Possible types of events that the inferior handler will have to |
| 151 | deal with. */ |
| 152 | enum inferior_event_type |
| 153 | { |
| 154 | /* There is a request to quit the inferior, abandon it. */ |
| 155 | INF_QUIT_REQ, |
| 156 | /* Process a normal inferior event which will result in target_wait |
| 157 | being called. */ |
| 158 | INF_REG_EVENT, |
| 159 | /* Deal with an error on the inferior. */ |
| 160 | INF_ERROR, |
| 161 | /* We are called because a timer went off. */ |
| 162 | INF_TIMER, |
| 163 | /* We are called to do stuff after the inferior stops. */ |
| 164 | INF_EXEC_COMPLETE, |
| 165 | /* We are called to do some stuff after the inferior stops, but we |
| 166 | are expected to reenter the proceed() and |
| 167 | handle_inferior_event() functions. This is used only in case of |
| 168 | 'step n' like commands. */ |
| 169 | INF_EXEC_CONTINUE |
| 170 | }; |
| 171 | |
| 172 | /* Return the string for a signal. */ |
| 173 | extern char *target_signal_to_string (enum target_signal); |
| 174 | |
| 175 | /* Return the name (SIGHUP, etc.) for a signal. */ |
| 176 | extern char *target_signal_to_name (enum target_signal); |
| 177 | |
| 178 | /* Given a name (SIGHUP, etc.), return its signal. */ |
| 179 | enum target_signal target_signal_from_name (char *); |
| 180 | \f |
| 181 | /* Request the transfer of up to LEN 8-bit bytes of the target's |
| 182 | OBJECT. The OFFSET, for a seekable object, specifies the starting |
| 183 | point. The ANNEX can be used to provide additional data-specific |
| 184 | information to the target. |
| 185 | |
| 186 | Return the number of bytes actually transfered, zero when no |
| 187 | further transfer is possible, and -1 when the transfer is not |
| 188 | supported. |
| 189 | |
| 190 | NOTE: cagney/2003-10-17: The current interface does not support a |
| 191 | "retry" mechanism. Instead it assumes that at least one byte will |
| 192 | be transfered on each call. |
| 193 | |
| 194 | NOTE: cagney/2003-10-17: The current interface can lead to |
| 195 | fragmented transfers. Lower target levels should not implement |
| 196 | hacks, such as enlarging the transfer, in an attempt to compensate |
| 197 | for this. Instead, the target stack should be extended so that it |
| 198 | implements supply/collect methods and a look-aside object cache. |
| 199 | With that available, the lowest target can safely and freely "push" |
| 200 | data up the stack. |
| 201 | |
| 202 | NOTE: cagney/2003-10-17: Unlike the old query and the memory |
| 203 | transfer mechanisms, these methods are explicitly parameterized by |
| 204 | the target that it should be applied to. |
| 205 | |
| 206 | NOTE: cagney/2003-10-17: Just like the old query and memory xfer |
| 207 | methods, these new methods perform partial transfers. The only |
| 208 | difference is that these new methods thought to include "partial" |
| 209 | in the name. The old code's failure to do this lead to much |
| 210 | confusion and duplication of effort as each target object attempted |
| 211 | to locally take responsibility for something it didn't have to |
| 212 | worry about. |
| 213 | |
| 214 | NOTE: cagney/2003-10-17: With a TARGET_OBJECT_KOD object, for |
| 215 | backward compatibility with the "target_query" method that this |
| 216 | replaced, when OFFSET and LEN are both zero, return the "minimum" |
| 217 | buffer size. See "remote.c" for further information. */ |
| 218 | |
| 219 | enum target_object |
| 220 | { |
| 221 | /* Kernel Object Display transfer. See "kod.c" and "remote.c". */ |
| 222 | TARGET_OBJECT_KOD, |
| 223 | /* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */ |
| 224 | TARGET_OBJECT_AVR, |
| 225 | /* Transfer up-to LEN bytes of memory starting at OFFSET. */ |
| 226 | TARGET_OBJECT_MEMORY, |
| 227 | /* Kernel Unwind Table. See "ia64-tdep.c". */ |
| 228 | TARGET_OBJECT_UNWIND_TABLE, |
| 229 | /* Transfer auxilliary vector. */ |
| 230 | TARGET_OBJECT_AUXV, |
| 231 | /* StackGhost cookie. See "sparc-tdep.c". */ |
| 232 | TARGET_OBJECT_WCOOKIE |
| 233 | |
| 234 | /* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC, ... */ |
| 235 | }; |
| 236 | |
| 237 | extern LONGEST target_read_partial (struct target_ops *ops, |
| 238 | enum target_object object, |
| 239 | const char *annex, void *buf, |
| 240 | ULONGEST offset, LONGEST len); |
| 241 | |
| 242 | extern LONGEST target_write_partial (struct target_ops *ops, |
| 243 | enum target_object object, |
| 244 | const char *annex, const void *buf, |
| 245 | ULONGEST offset, LONGEST len); |
| 246 | |
| 247 | /* Wrappers to perform the full transfer. */ |
| 248 | extern LONGEST target_read (struct target_ops *ops, |
| 249 | enum target_object object, |
| 250 | const char *annex, void *buf, |
| 251 | ULONGEST offset, LONGEST len); |
| 252 | |
| 253 | extern LONGEST target_write (struct target_ops *ops, |
| 254 | enum target_object object, |
| 255 | const char *annex, const void *buf, |
| 256 | ULONGEST offset, LONGEST len); |
| 257 | |
| 258 | /* Wrappers to target read/write that perform memory transfers. They |
| 259 | throw an error if the memory transfer fails. |
| 260 | |
| 261 | NOTE: cagney/2003-10-23: The naming schema is lifted from |
| 262 | "frame.h". The parameter order is lifted from get_frame_memory, |
| 263 | which in turn lifted it from read_memory. */ |
| 264 | |
| 265 | extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr, |
| 266 | void *buf, LONGEST len); |
| 267 | extern ULONGEST get_target_memory_unsigned (struct target_ops *ops, |
| 268 | CORE_ADDR addr, int len); |
| 269 | \f |
| 270 | |
| 271 | /* If certain kinds of activity happen, target_wait should perform |
| 272 | callbacks. */ |
| 273 | /* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible |
| 274 | on TARGET_ACTIVITY_FD. */ |
| 275 | extern int target_activity_fd; |
| 276 | /* Returns zero to leave the inferior alone, one to interrupt it. */ |
| 277 | extern int (*target_activity_function) (void); |
| 278 | \f |
| 279 | struct thread_info; /* fwd decl for parameter list below: */ |
| 280 | |
| 281 | struct target_ops |
| 282 | { |
| 283 | struct target_ops *beneath; /* To the target under this one. */ |
| 284 | char *to_shortname; /* Name this target type */ |
| 285 | char *to_longname; /* Name for printing */ |
| 286 | char *to_doc; /* Documentation. Does not include trailing |
| 287 | newline, and starts with a one-line descrip- |
| 288 | tion (probably similar to to_longname). */ |
| 289 | /* Per-target scratch pad. */ |
| 290 | void *to_data; |
| 291 | /* The open routine takes the rest of the parameters from the |
| 292 | command, and (if successful) pushes a new target onto the |
| 293 | stack. Targets should supply this routine, if only to provide |
| 294 | an error message. */ |
| 295 | void (*to_open) (char *, int); |
| 296 | /* Old targets with a static target vector provide "to_close". |
| 297 | New re-entrant targets provide "to_xclose" and that is expected |
| 298 | to xfree everything (including the "struct target_ops"). */ |
| 299 | void (*to_xclose) (struct target_ops *targ, int quitting); |
| 300 | void (*to_close) (int); |
| 301 | void (*to_attach) (char *, int); |
| 302 | void (*to_post_attach) (int); |
| 303 | void (*to_detach) (char *, int); |
| 304 | void (*to_disconnect) (char *, int); |
| 305 | void (*to_resume) (ptid_t, int, enum target_signal); |
| 306 | ptid_t (*to_wait) (ptid_t, struct target_waitstatus *); |
| 307 | void (*to_fetch_registers) (int); |
| 308 | void (*to_store_registers) (int); |
| 309 | void (*to_prepare_to_store) (void); |
| 310 | |
| 311 | /* Transfer LEN bytes of memory between GDB address MYADDR and |
| 312 | target address MEMADDR. If WRITE, transfer them to the target, else |
| 313 | transfer them from the target. TARGET is the target from which we |
| 314 | get this function. |
| 315 | |
| 316 | Return value, N, is one of the following: |
| 317 | |
| 318 | 0 means that we can't handle this. If errno has been set, it is the |
| 319 | error which prevented us from doing it (FIXME: What about bfd_error?). |
| 320 | |
| 321 | positive (call it N) means that we have transferred N bytes |
| 322 | starting at MEMADDR. We might be able to handle more bytes |
| 323 | beyond this length, but no promises. |
| 324 | |
| 325 | negative (call its absolute value N) means that we cannot |
| 326 | transfer right at MEMADDR, but we could transfer at least |
| 327 | something at MEMADDR + N. |
| 328 | |
| 329 | NOTE: cagney/2004-10-01: This has been entirely superseeded by |
| 330 | to_xfer_partial and inferior inheritance. */ |
| 331 | |
| 332 | int (*deprecated_xfer_memory) (CORE_ADDR memaddr, char *myaddr, |
| 333 | int len, int write, |
| 334 | struct mem_attrib *attrib, |
| 335 | struct target_ops *target); |
| 336 | |
| 337 | void (*to_files_info) (struct target_ops *); |
| 338 | int (*to_insert_breakpoint) (CORE_ADDR, char *); |
| 339 | int (*to_remove_breakpoint) (CORE_ADDR, char *); |
| 340 | int (*to_can_use_hw_breakpoint) (int, int, int); |
| 341 | int (*to_insert_hw_breakpoint) (CORE_ADDR, char *); |
| 342 | int (*to_remove_hw_breakpoint) (CORE_ADDR, char *); |
| 343 | int (*to_remove_watchpoint) (CORE_ADDR, int, int); |
| 344 | int (*to_insert_watchpoint) (CORE_ADDR, int, int); |
| 345 | int (*to_stopped_by_watchpoint) (void); |
| 346 | int to_have_continuable_watchpoint; |
| 347 | int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *); |
| 348 | int (*to_region_size_ok_for_hw_watchpoint) (int); |
| 349 | void (*to_terminal_init) (void); |
| 350 | void (*to_terminal_inferior) (void); |
| 351 | void (*to_terminal_ours_for_output) (void); |
| 352 | void (*to_terminal_ours) (void); |
| 353 | void (*to_terminal_save_ours) (void); |
| 354 | void (*to_terminal_info) (char *, int); |
| 355 | void (*to_kill) (void); |
| 356 | void (*to_load) (char *, int); |
| 357 | int (*to_lookup_symbol) (char *, CORE_ADDR *); |
| 358 | void (*to_create_inferior) (char *, char *, char **, int); |
| 359 | void (*to_post_startup_inferior) (ptid_t); |
| 360 | void (*to_acknowledge_created_inferior) (int); |
| 361 | void (*to_insert_fork_catchpoint) (int); |
| 362 | int (*to_remove_fork_catchpoint) (int); |
| 363 | void (*to_insert_vfork_catchpoint) (int); |
| 364 | int (*to_remove_vfork_catchpoint) (int); |
| 365 | int (*to_follow_fork) (int); |
| 366 | void (*to_insert_exec_catchpoint) (int); |
| 367 | int (*to_remove_exec_catchpoint) (int); |
| 368 | int (*to_reported_exec_events_per_exec_call) (void); |
| 369 | int (*to_has_exited) (int, int, int *); |
| 370 | void (*to_mourn_inferior) (void); |
| 371 | int (*to_can_run) (void); |
| 372 | void (*to_notice_signals) (ptid_t ptid); |
| 373 | int (*to_thread_alive) (ptid_t ptid); |
| 374 | void (*to_find_new_threads) (void); |
| 375 | char *(*to_pid_to_str) (ptid_t); |
| 376 | char *(*to_extra_thread_info) (struct thread_info *); |
| 377 | void (*to_stop) (void); |
| 378 | void (*to_rcmd) (char *command, struct ui_file *output); |
| 379 | struct symtab_and_line *(*to_enable_exception_callback) (enum |
| 380 | exception_event_kind, |
| 381 | int); |
| 382 | struct exception_event_record *(*to_get_current_exception_event) (void); |
| 383 | char *(*to_pid_to_exec_file) (int pid); |
| 384 | enum strata to_stratum; |
| 385 | int to_has_all_memory; |
| 386 | int to_has_memory; |
| 387 | int to_has_stack; |
| 388 | int to_has_registers; |
| 389 | int to_has_execution; |
| 390 | int to_has_thread_control; /* control thread execution */ |
| 391 | struct section_table |
| 392 | *to_sections; |
| 393 | struct section_table |
| 394 | *to_sections_end; |
| 395 | /* ASYNC target controls */ |
| 396 | int (*to_can_async_p) (void); |
| 397 | int (*to_is_async_p) (void); |
| 398 | void (*to_async) (void (*cb) (enum inferior_event_type, void *context), |
| 399 | void *context); |
| 400 | int to_async_mask_value; |
| 401 | int (*to_find_memory_regions) (int (*) (CORE_ADDR, |
| 402 | unsigned long, |
| 403 | int, int, int, |
| 404 | void *), |
| 405 | void *); |
| 406 | char * (*to_make_corefile_notes) (bfd *, int *); |
| 407 | |
| 408 | /* Return the thread-local address at OFFSET in the |
| 409 | thread-local storage for the thread PTID and the shared library |
| 410 | or executable file given by OBJFILE. If that block of |
| 411 | thread-local storage hasn't been allocated yet, this function |
| 412 | may return an error. */ |
| 413 | CORE_ADDR (*to_get_thread_local_address) (ptid_t ptid, |
| 414 | CORE_ADDR load_module_addr, |
| 415 | CORE_ADDR offset); |
| 416 | |
| 417 | /* Perform partial transfers on OBJECT. See target_read_partial |
| 418 | and target_write_partial for details of each variant. One, and |
| 419 | only one, of readbuf or writebuf must be non-NULL. */ |
| 420 | LONGEST (*to_xfer_partial) (struct target_ops *ops, |
| 421 | enum target_object object, const char *annex, |
| 422 | void *readbuf, const void *writebuf, |
| 423 | ULONGEST offset, LONGEST len); |
| 424 | |
| 425 | int to_magic; |
| 426 | /* Need sub-structure for target machine related rather than comm related? |
| 427 | */ |
| 428 | }; |
| 429 | |
| 430 | /* Magic number for checking ops size. If a struct doesn't end with this |
| 431 | number, somebody changed the declaration but didn't change all the |
| 432 | places that initialize one. */ |
| 433 | |
| 434 | #define OPS_MAGIC 3840 |
| 435 | |
| 436 | /* The ops structure for our "current" target process. This should |
| 437 | never be NULL. If there is no target, it points to the dummy_target. */ |
| 438 | |
| 439 | extern struct target_ops current_target; |
| 440 | |
| 441 | /* Define easy words for doing these operations on our current target. */ |
| 442 | |
| 443 | #define target_shortname (current_target.to_shortname) |
| 444 | #define target_longname (current_target.to_longname) |
| 445 | |
| 446 | /* Does whatever cleanup is required for a target that we are no |
| 447 | longer going to be calling. QUITTING indicates that GDB is exiting |
| 448 | and should not get hung on an error (otherwise it is important to |
| 449 | perform clean termination, even if it takes a while). This routine |
| 450 | is automatically always called when popping the target off the |
| 451 | target stack (to_beneath is undefined). Closing file descriptors |
| 452 | and freeing all memory allocated memory are typical things it |
| 453 | should do. */ |
| 454 | |
| 455 | void target_close (struct target_ops *targ, int quitting); |
| 456 | |
| 457 | /* Attaches to a process on the target side. Arguments are as passed |
| 458 | to the `attach' command by the user. This routine can be called |
| 459 | when the target is not on the target-stack, if the target_can_run |
| 460 | routine returns 1; in that case, it must push itself onto the stack. |
| 461 | Upon exit, the target should be ready for normal operations, and |
| 462 | should be ready to deliver the status of the process immediately |
| 463 | (without waiting) to an upcoming target_wait call. */ |
| 464 | |
| 465 | #define target_attach(args, from_tty) \ |
| 466 | (*current_target.to_attach) (args, from_tty) |
| 467 | |
| 468 | /* The target_attach operation places a process under debugger control, |
| 469 | and stops the process. |
| 470 | |
| 471 | This operation provides a target-specific hook that allows the |
| 472 | necessary bookkeeping to be performed after an attach completes. */ |
| 473 | #define target_post_attach(pid) \ |
| 474 | (*current_target.to_post_attach) (pid) |
| 475 | |
| 476 | /* Takes a program previously attached to and detaches it. |
| 477 | The program may resume execution (some targets do, some don't) and will |
| 478 | no longer stop on signals, etc. We better not have left any breakpoints |
| 479 | in the program or it'll die when it hits one. ARGS is arguments |
| 480 | typed by the user (e.g. a signal to send the process). FROM_TTY |
| 481 | says whether to be verbose or not. */ |
| 482 | |
| 483 | extern void target_detach (char *, int); |
| 484 | |
| 485 | /* Disconnect from the current target without resuming it (leaving it |
| 486 | waiting for a debugger). */ |
| 487 | |
| 488 | extern void target_disconnect (char *, int); |
| 489 | |
| 490 | /* Resume execution of the target process PTID. STEP says whether to |
| 491 | single-step or to run free; SIGGNAL is the signal to be given to |
| 492 | the target, or TARGET_SIGNAL_0 for no signal. The caller may not |
| 493 | pass TARGET_SIGNAL_DEFAULT. */ |
| 494 | |
| 495 | #define target_resume(ptid, step, siggnal) \ |
| 496 | do { \ |
| 497 | dcache_invalidate(target_dcache); \ |
| 498 | (*current_target.to_resume) (ptid, step, siggnal); \ |
| 499 | } while (0) |
| 500 | |
| 501 | /* Wait for process pid to do something. PTID = -1 to wait for any |
| 502 | pid to do something. Return pid of child, or -1 in case of error; |
| 503 | store status through argument pointer STATUS. Note that it is |
| 504 | _NOT_ OK to throw_exception() out of target_wait() without popping |
| 505 | the debugging target from the stack; GDB isn't prepared to get back |
| 506 | to the prompt with a debugging target but without the frame cache, |
| 507 | stop_pc, etc., set up. */ |
| 508 | |
| 509 | #define target_wait(ptid, status) \ |
| 510 | (*current_target.to_wait) (ptid, status) |
| 511 | |
| 512 | /* Fetch at least register REGNO, or all regs if regno == -1. No result. */ |
| 513 | |
| 514 | #define target_fetch_registers(regno) \ |
| 515 | (*current_target.to_fetch_registers) (regno) |
| 516 | |
| 517 | /* Store at least register REGNO, or all regs if REGNO == -1. |
| 518 | It can store as many registers as it wants to, so target_prepare_to_store |
| 519 | must have been previously called. Calls error() if there are problems. */ |
| 520 | |
| 521 | #define target_store_registers(regs) \ |
| 522 | (*current_target.to_store_registers) (regs) |
| 523 | |
| 524 | /* Get ready to modify the registers array. On machines which store |
| 525 | individual registers, this doesn't need to do anything. On machines |
| 526 | which store all the registers in one fell swoop, this makes sure |
| 527 | that REGISTERS contains all the registers from the program being |
| 528 | debugged. */ |
| 529 | |
| 530 | #define target_prepare_to_store() \ |
| 531 | (*current_target.to_prepare_to_store) () |
| 532 | |
| 533 | extern DCACHE *target_dcache; |
| 534 | |
| 535 | extern int do_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write, |
| 536 | struct mem_attrib *attrib); |
| 537 | |
| 538 | extern int target_read_string (CORE_ADDR, char **, int, int *); |
| 539 | |
| 540 | extern int target_read_memory (CORE_ADDR memaddr, bfd_byte *myaddr, int len); |
| 541 | |
| 542 | extern int target_write_memory (CORE_ADDR memaddr, const bfd_byte *myaddr, |
| 543 | int len); |
| 544 | |
| 545 | extern int xfer_memory (CORE_ADDR, char *, int, int, |
| 546 | struct mem_attrib *, struct target_ops *); |
| 547 | |
| 548 | extern int child_xfer_memory (CORE_ADDR, char *, int, int, |
| 549 | struct mem_attrib *, struct target_ops *); |
| 550 | |
| 551 | /* Make a single attempt at transfering LEN bytes. On a successful |
| 552 | transfer, the number of bytes actually transfered is returned and |
| 553 | ERR is set to 0. When a transfer fails, -1 is returned (the number |
| 554 | of bytes actually transfered is not defined) and ERR is set to a |
| 555 | non-zero error indication. */ |
| 556 | |
| 557 | extern int target_read_memory_partial (CORE_ADDR addr, char *buf, int len, |
| 558 | int *err); |
| 559 | |
| 560 | extern int target_write_memory_partial (CORE_ADDR addr, char *buf, int len, |
| 561 | int *err); |
| 562 | |
| 563 | extern char *child_pid_to_exec_file (int); |
| 564 | |
| 565 | extern char *child_core_file_to_sym_file (char *); |
| 566 | |
| 567 | #if defined(CHILD_POST_ATTACH) |
| 568 | extern void child_post_attach (int); |
| 569 | #endif |
| 570 | |
| 571 | extern void child_post_startup_inferior (ptid_t); |
| 572 | |
| 573 | extern void child_acknowledge_created_inferior (int); |
| 574 | |
| 575 | extern void child_insert_fork_catchpoint (int); |
| 576 | |
| 577 | extern int child_remove_fork_catchpoint (int); |
| 578 | |
| 579 | extern void child_insert_vfork_catchpoint (int); |
| 580 | |
| 581 | extern int child_remove_vfork_catchpoint (int); |
| 582 | |
| 583 | extern void child_acknowledge_created_inferior (int); |
| 584 | |
| 585 | extern int child_follow_fork (int); |
| 586 | |
| 587 | extern void child_insert_exec_catchpoint (int); |
| 588 | |
| 589 | extern int child_remove_exec_catchpoint (int); |
| 590 | |
| 591 | extern int child_reported_exec_events_per_exec_call (void); |
| 592 | |
| 593 | extern int child_has_exited (int, int, int *); |
| 594 | |
| 595 | extern int child_thread_alive (ptid_t); |
| 596 | |
| 597 | /* From infrun.c. */ |
| 598 | |
| 599 | extern int inferior_has_forked (int pid, int *child_pid); |
| 600 | |
| 601 | extern int inferior_has_vforked (int pid, int *child_pid); |
| 602 | |
| 603 | extern int inferior_has_execd (int pid, char **execd_pathname); |
| 604 | |
| 605 | /* From exec.c */ |
| 606 | |
| 607 | extern void print_section_info (struct target_ops *, bfd *); |
| 608 | |
| 609 | /* Print a line about the current target. */ |
| 610 | |
| 611 | #define target_files_info() \ |
| 612 | (*current_target.to_files_info) (¤t_target) |
| 613 | |
| 614 | /* Insert a breakpoint at address ADDR in the target machine. SAVE is |
| 615 | a pointer to memory allocated for saving the target contents. It |
| 616 | is guaranteed by the caller to be long enough to save the number of |
| 617 | breakpoint bytes indicated by BREAKPOINT_FROM_PC. Result is 0 for |
| 618 | success, or an errno value. */ |
| 619 | |
| 620 | #define target_insert_breakpoint(addr, save) \ |
| 621 | (*current_target.to_insert_breakpoint) (addr, save) |
| 622 | |
| 623 | /* Remove a breakpoint at address ADDR in the target machine. |
| 624 | SAVE is a pointer to the same save area |
| 625 | that was previously passed to target_insert_breakpoint. |
| 626 | Result is 0 for success, or an errno value. */ |
| 627 | |
| 628 | #define target_remove_breakpoint(addr, save) \ |
| 629 | (*current_target.to_remove_breakpoint) (addr, save) |
| 630 | |
| 631 | /* Initialize the terminal settings we record for the inferior, |
| 632 | before we actually run the inferior. */ |
| 633 | |
| 634 | #define target_terminal_init() \ |
| 635 | (*current_target.to_terminal_init) () |
| 636 | |
| 637 | /* Put the inferior's terminal settings into effect. |
| 638 | This is preparation for starting or resuming the inferior. */ |
| 639 | |
| 640 | #define target_terminal_inferior() \ |
| 641 | (*current_target.to_terminal_inferior) () |
| 642 | |
| 643 | /* Put some of our terminal settings into effect, |
| 644 | enough to get proper results from our output, |
| 645 | but do not change into or out of RAW mode |
| 646 | so that no input is discarded. |
| 647 | |
| 648 | After doing this, either terminal_ours or terminal_inferior |
| 649 | should be called to get back to a normal state of affairs. */ |
| 650 | |
| 651 | #define target_terminal_ours_for_output() \ |
| 652 | (*current_target.to_terminal_ours_for_output) () |
| 653 | |
| 654 | /* Put our terminal settings into effect. |
| 655 | First record the inferior's terminal settings |
| 656 | so they can be restored properly later. */ |
| 657 | |
| 658 | #define target_terminal_ours() \ |
| 659 | (*current_target.to_terminal_ours) () |
| 660 | |
| 661 | /* Save our terminal settings. |
| 662 | This is called from TUI after entering or leaving the curses |
| 663 | mode. Since curses modifies our terminal this call is here |
| 664 | to take this change into account. */ |
| 665 | |
| 666 | #define target_terminal_save_ours() \ |
| 667 | (*current_target.to_terminal_save_ours) () |
| 668 | |
| 669 | /* Print useful information about our terminal status, if such a thing |
| 670 | exists. */ |
| 671 | |
| 672 | #define target_terminal_info(arg, from_tty) \ |
| 673 | (*current_target.to_terminal_info) (arg, from_tty) |
| 674 | |
| 675 | /* Kill the inferior process. Make it go away. */ |
| 676 | |
| 677 | #define target_kill() \ |
| 678 | (*current_target.to_kill) () |
| 679 | |
| 680 | /* Load an executable file into the target process. This is expected |
| 681 | to not only bring new code into the target process, but also to |
| 682 | update GDB's symbol tables to match. */ |
| 683 | |
| 684 | extern void target_load (char *arg, int from_tty); |
| 685 | |
| 686 | /* Look up a symbol in the target's symbol table. NAME is the symbol |
| 687 | name. ADDRP is a CORE_ADDR * pointing to where the value of the |
| 688 | symbol should be returned. The result is 0 if successful, nonzero |
| 689 | if the symbol does not exist in the target environment. This |
| 690 | function should not call error() if communication with the target |
| 691 | is interrupted, since it is called from symbol reading, but should |
| 692 | return nonzero, possibly doing a complain(). */ |
| 693 | |
| 694 | #define target_lookup_symbol(name, addrp) \ |
| 695 | (*current_target.to_lookup_symbol) (name, addrp) |
| 696 | |
| 697 | /* Start an inferior process and set inferior_ptid to its pid. |
| 698 | EXEC_FILE is the file to run. |
| 699 | ALLARGS is a string containing the arguments to the program. |
| 700 | ENV is the environment vector to pass. Errors reported with error(). |
| 701 | On VxWorks and various standalone systems, we ignore exec_file. */ |
| 702 | |
| 703 | #define target_create_inferior(exec_file, args, env, FROM_TTY) \ |
| 704 | (*current_target.to_create_inferior) (exec_file, args, env, (FROM_TTY)) |
| 705 | |
| 706 | |
| 707 | /* Some targets (such as ttrace-based HPUX) don't allow us to request |
| 708 | notification of inferior events such as fork and vork immediately |
| 709 | after the inferior is created. (This because of how gdb gets an |
| 710 | inferior created via invoking a shell to do it. In such a scenario, |
| 711 | if the shell init file has commands in it, the shell will fork and |
| 712 | exec for each of those commands, and we will see each such fork |
| 713 | event. Very bad.) |
| 714 | |
| 715 | Such targets will supply an appropriate definition for this function. */ |
| 716 | |
| 717 | #define target_post_startup_inferior(ptid) \ |
| 718 | (*current_target.to_post_startup_inferior) (ptid) |
| 719 | |
| 720 | /* On some targets, the sequence of starting up an inferior requires |
| 721 | some synchronization between gdb and the new inferior process, PID. */ |
| 722 | |
| 723 | #define target_acknowledge_created_inferior(pid) \ |
| 724 | (*current_target.to_acknowledge_created_inferior) (pid) |
| 725 | |
| 726 | /* On some targets, we can catch an inferior fork or vfork event when |
| 727 | it occurs. These functions insert/remove an already-created |
| 728 | catchpoint for such events. */ |
| 729 | |
| 730 | #define target_insert_fork_catchpoint(pid) \ |
| 731 | (*current_target.to_insert_fork_catchpoint) (pid) |
| 732 | |
| 733 | #define target_remove_fork_catchpoint(pid) \ |
| 734 | (*current_target.to_remove_fork_catchpoint) (pid) |
| 735 | |
| 736 | #define target_insert_vfork_catchpoint(pid) \ |
| 737 | (*current_target.to_insert_vfork_catchpoint) (pid) |
| 738 | |
| 739 | #define target_remove_vfork_catchpoint(pid) \ |
| 740 | (*current_target.to_remove_vfork_catchpoint) (pid) |
| 741 | |
| 742 | /* If the inferior forks or vforks, this function will be called at |
| 743 | the next resume in order to perform any bookkeeping and fiddling |
| 744 | necessary to continue debugging either the parent or child, as |
| 745 | requested, and releasing the other. Information about the fork |
| 746 | or vfork event is available via get_last_target_status (). |
| 747 | This function returns 1 if the inferior should not be resumed |
| 748 | (i.e. there is another event pending). */ |
| 749 | |
| 750 | #define target_follow_fork(follow_child) \ |
| 751 | (*current_target.to_follow_fork) (follow_child) |
| 752 | |
| 753 | /* On some targets, we can catch an inferior exec event when it |
| 754 | occurs. These functions insert/remove an already-created |
| 755 | catchpoint for such events. */ |
| 756 | |
| 757 | #define target_insert_exec_catchpoint(pid) \ |
| 758 | (*current_target.to_insert_exec_catchpoint) (pid) |
| 759 | |
| 760 | #define target_remove_exec_catchpoint(pid) \ |
| 761 | (*current_target.to_remove_exec_catchpoint) (pid) |
| 762 | |
| 763 | /* Returns the number of exec events that are reported when a process |
| 764 | invokes a flavor of the exec() system call on this target, if exec |
| 765 | events are being reported. */ |
| 766 | |
| 767 | #define target_reported_exec_events_per_exec_call() \ |
| 768 | (*current_target.to_reported_exec_events_per_exec_call) () |
| 769 | |
| 770 | /* Returns TRUE if PID has exited. And, also sets EXIT_STATUS to the |
| 771 | exit code of PID, if any. */ |
| 772 | |
| 773 | #define target_has_exited(pid,wait_status,exit_status) \ |
| 774 | (*current_target.to_has_exited) (pid,wait_status,exit_status) |
| 775 | |
| 776 | /* The debugger has completed a blocking wait() call. There is now |
| 777 | some process event that must be processed. This function should |
| 778 | be defined by those targets that require the debugger to perform |
| 779 | cleanup or internal state changes in response to the process event. */ |
| 780 | |
| 781 | /* The inferior process has died. Do what is right. */ |
| 782 | |
| 783 | #define target_mourn_inferior() \ |
| 784 | (*current_target.to_mourn_inferior) () |
| 785 | |
| 786 | /* Does target have enough data to do a run or attach command? */ |
| 787 | |
| 788 | #define target_can_run(t) \ |
| 789 | ((t)->to_can_run) () |
| 790 | |
| 791 | /* post process changes to signal handling in the inferior. */ |
| 792 | |
| 793 | #define target_notice_signals(ptid) \ |
| 794 | (*current_target.to_notice_signals) (ptid) |
| 795 | |
| 796 | /* Check to see if a thread is still alive. */ |
| 797 | |
| 798 | #define target_thread_alive(ptid) \ |
| 799 | (*current_target.to_thread_alive) (ptid) |
| 800 | |
| 801 | /* Query for new threads and add them to the thread list. */ |
| 802 | |
| 803 | #define target_find_new_threads() \ |
| 804 | (*current_target.to_find_new_threads) (); \ |
| 805 | |
| 806 | /* Make target stop in a continuable fashion. (For instance, under |
| 807 | Unix, this should act like SIGSTOP). This function is normally |
| 808 | used by GUIs to implement a stop button. */ |
| 809 | |
| 810 | #define target_stop current_target.to_stop |
| 811 | |
| 812 | /* Send the specified COMMAND to the target's monitor |
| 813 | (shell,interpreter) for execution. The result of the query is |
| 814 | placed in OUTBUF. */ |
| 815 | |
| 816 | #define target_rcmd(command, outbuf) \ |
| 817 | (*current_target.to_rcmd) (command, outbuf) |
| 818 | |
| 819 | |
| 820 | /* Get the symbol information for a breakpointable routine called when |
| 821 | an exception event occurs. |
| 822 | Intended mainly for C++, and for those |
| 823 | platforms/implementations where such a callback mechanism is available, |
| 824 | e.g. HP-UX with ANSI C++ (aCC). Some compilers (e.g. g++) support |
| 825 | different mechanisms for debugging exceptions. */ |
| 826 | |
| 827 | #define target_enable_exception_callback(kind, enable) \ |
| 828 | (*current_target.to_enable_exception_callback) (kind, enable) |
| 829 | |
| 830 | /* Get the current exception event kind -- throw or catch, etc. */ |
| 831 | |
| 832 | #define target_get_current_exception_event() \ |
| 833 | (*current_target.to_get_current_exception_event) () |
| 834 | |
| 835 | /* Does the target include all of memory, or only part of it? This |
| 836 | determines whether we look up the target chain for other parts of |
| 837 | memory if this target can't satisfy a request. */ |
| 838 | |
| 839 | #define target_has_all_memory \ |
| 840 | (current_target.to_has_all_memory) |
| 841 | |
| 842 | /* Does the target include memory? (Dummy targets don't.) */ |
| 843 | |
| 844 | #define target_has_memory \ |
| 845 | (current_target.to_has_memory) |
| 846 | |
| 847 | /* Does the target have a stack? (Exec files don't, VxWorks doesn't, until |
| 848 | we start a process.) */ |
| 849 | |
| 850 | #define target_has_stack \ |
| 851 | (current_target.to_has_stack) |
| 852 | |
| 853 | /* Does the target have registers? (Exec files don't.) */ |
| 854 | |
| 855 | #define target_has_registers \ |
| 856 | (current_target.to_has_registers) |
| 857 | |
| 858 | /* Does the target have execution? Can we make it jump (through |
| 859 | hoops), or pop its stack a few times? FIXME: If this is to work that |
| 860 | way, it needs to check whether an inferior actually exists. |
| 861 | remote-udi.c and probably other targets can be the current target |
| 862 | when the inferior doesn't actually exist at the moment. Right now |
| 863 | this just tells us whether this target is *capable* of execution. */ |
| 864 | |
| 865 | #define target_has_execution \ |
| 866 | (current_target.to_has_execution) |
| 867 | |
| 868 | /* Can the target support the debugger control of thread execution? |
| 869 | a) Can it lock the thread scheduler? |
| 870 | b) Can it switch the currently running thread? */ |
| 871 | |
| 872 | #define target_can_lock_scheduler \ |
| 873 | (current_target.to_has_thread_control & tc_schedlock) |
| 874 | |
| 875 | #define target_can_switch_threads \ |
| 876 | (current_target.to_has_thread_control & tc_switch) |
| 877 | |
| 878 | /* Can the target support asynchronous execution? */ |
| 879 | #define target_can_async_p() (current_target.to_can_async_p ()) |
| 880 | |
| 881 | /* Is the target in asynchronous execution mode? */ |
| 882 | #define target_is_async_p() (current_target.to_is_async_p()) |
| 883 | |
| 884 | /* Put the target in async mode with the specified callback function. */ |
| 885 | #define target_async(CALLBACK,CONTEXT) \ |
| 886 | (current_target.to_async((CALLBACK), (CONTEXT))) |
| 887 | |
| 888 | /* This is to be used ONLY within call_function_by_hand(). It provides |
| 889 | a workaround, to have inferior function calls done in sychronous |
| 890 | mode, even though the target is asynchronous. After |
| 891 | target_async_mask(0) is called, calls to target_can_async_p() will |
| 892 | return FALSE , so that target_resume() will not try to start the |
| 893 | target asynchronously. After the inferior stops, we IMMEDIATELY |
| 894 | restore the previous nature of the target, by calling |
| 895 | target_async_mask(1). After that, target_can_async_p() will return |
| 896 | TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED. |
| 897 | |
| 898 | FIXME ezannoni 1999-12-13: we won't need this once we move |
| 899 | the turning async on and off to the single execution commands, |
| 900 | from where it is done currently, in remote_resume(). */ |
| 901 | |
| 902 | #define target_async_mask_value \ |
| 903 | (current_target.to_async_mask_value) |
| 904 | |
| 905 | extern int target_async_mask (int mask); |
| 906 | |
| 907 | extern void target_link (char *, CORE_ADDR *); |
| 908 | |
| 909 | /* Converts a process id to a string. Usually, the string just contains |
| 910 | `process xyz', but on some systems it may contain |
| 911 | `process xyz thread abc'. */ |
| 912 | |
| 913 | #undef target_pid_to_str |
| 914 | #define target_pid_to_str(PID) current_target.to_pid_to_str (PID) |
| 915 | |
| 916 | #ifndef target_tid_to_str |
| 917 | #define target_tid_to_str(PID) \ |
| 918 | target_pid_to_str (PID) |
| 919 | extern char *normal_pid_to_str (ptid_t ptid); |
| 920 | #endif |
| 921 | |
| 922 | /* Return a short string describing extra information about PID, |
| 923 | e.g. "sleeping", "runnable", "running on LWP 3". Null return value |
| 924 | is okay. */ |
| 925 | |
| 926 | #define target_extra_thread_info(TP) \ |
| 927 | (current_target.to_extra_thread_info (TP)) |
| 928 | |
| 929 | /* |
| 930 | * New Objfile Event Hook: |
| 931 | * |
| 932 | * Sometimes a GDB component wants to get notified whenever a new |
| 933 | * objfile is loaded. Mainly this is used by thread-debugging |
| 934 | * implementations that need to know when symbols for the target |
| 935 | * thread implemenation are available. |
| 936 | * |
| 937 | * The old way of doing this is to define a macro 'target_new_objfile' |
| 938 | * that points to the function that you want to be called on every |
| 939 | * objfile/shlib load. |
| 940 | |
| 941 | The new way is to grab the function pointer, |
| 942 | 'deprecated_target_new_objfile_hook', and point it to the function |
| 943 | that you want to be called on every objfile/shlib load. |
| 944 | |
| 945 | If multiple clients are willing to be cooperative, they can each |
| 946 | save a pointer to the previous value of |
| 947 | deprecated_target_new_objfile_hook before modifying it, and arrange |
| 948 | for their function to call the previous function in the chain. In |
| 949 | that way, multiple clients can receive this notification (something |
| 950 | like with signal handlers). */ |
| 951 | |
| 952 | extern void (*deprecated_target_new_objfile_hook) (struct objfile *); |
| 953 | |
| 954 | #ifndef target_pid_or_tid_to_str |
| 955 | #define target_pid_or_tid_to_str(ID) \ |
| 956 | target_pid_to_str (ID) |
| 957 | #endif |
| 958 | |
| 959 | /* Attempts to find the pathname of the executable file |
| 960 | that was run to create a specified process. |
| 961 | |
| 962 | The process PID must be stopped when this operation is used. |
| 963 | |
| 964 | If the executable file cannot be determined, NULL is returned. |
| 965 | |
| 966 | Else, a pointer to a character string containing the pathname |
| 967 | is returned. This string should be copied into a buffer by |
| 968 | the client if the string will not be immediately used, or if |
| 969 | it must persist. */ |
| 970 | |
| 971 | #define target_pid_to_exec_file(pid) \ |
| 972 | (current_target.to_pid_to_exec_file) (pid) |
| 973 | |
| 974 | /* |
| 975 | * Iterator function for target memory regions. |
| 976 | * Calls a callback function once for each memory region 'mapped' |
| 977 | * in the child process. Defined as a simple macro rather than |
| 978 | * as a function macro so that it can be tested for nullity. |
| 979 | */ |
| 980 | |
| 981 | #define target_find_memory_regions(FUNC, DATA) \ |
| 982 | (current_target.to_find_memory_regions) (FUNC, DATA) |
| 983 | |
| 984 | /* |
| 985 | * Compose corefile .note section. |
| 986 | */ |
| 987 | |
| 988 | #define target_make_corefile_notes(BFD, SIZE_P) \ |
| 989 | (current_target.to_make_corefile_notes) (BFD, SIZE_P) |
| 990 | |
| 991 | /* Thread-local values. */ |
| 992 | #define target_get_thread_local_address \ |
| 993 | (current_target.to_get_thread_local_address) |
| 994 | #define target_get_thread_local_address_p() \ |
| 995 | (target_get_thread_local_address != NULL) |
| 996 | |
| 997 | /* Hook to call target dependent code just after inferior target process has |
| 998 | started. */ |
| 999 | |
| 1000 | #ifndef TARGET_CREATE_INFERIOR_HOOK |
| 1001 | #define TARGET_CREATE_INFERIOR_HOOK(PID) |
| 1002 | #endif |
| 1003 | |
| 1004 | /* Hardware watchpoint interfaces. */ |
| 1005 | |
| 1006 | /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or |
| 1007 | write). */ |
| 1008 | |
| 1009 | #ifndef STOPPED_BY_WATCHPOINT |
| 1010 | #define STOPPED_BY_WATCHPOINT(w) \ |
| 1011 | (*current_target.to_stopped_by_watchpoint) () |
| 1012 | #endif |
| 1013 | |
| 1014 | /* Non-zero if we have continuable watchpoints */ |
| 1015 | |
| 1016 | #ifndef HAVE_CONTINUABLE_WATCHPOINT |
| 1017 | #define HAVE_CONTINUABLE_WATCHPOINT \ |
| 1018 | (current_target.to_have_continuable_watchpoint) |
| 1019 | #endif |
| 1020 | |
| 1021 | /* Provide defaults for hardware watchpoint functions. */ |
| 1022 | |
| 1023 | /* If the *_hw_beakpoint functions have not been defined |
| 1024 | elsewhere use the definitions in the target vector. */ |
| 1025 | |
| 1026 | /* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is |
| 1027 | one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or |
| 1028 | bp_hardware_breakpoint. CNT is the number of such watchpoints used so far |
| 1029 | (including this one?). OTHERTYPE is who knows what... */ |
| 1030 | |
| 1031 | #ifndef TARGET_CAN_USE_HARDWARE_WATCHPOINT |
| 1032 | #define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) \ |
| 1033 | (*current_target.to_can_use_hw_breakpoint) (TYPE, CNT, OTHERTYPE); |
| 1034 | #endif |
| 1035 | |
| 1036 | #if !defined(TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT) |
| 1037 | #define TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT(byte_count) \ |
| 1038 | (*current_target.to_region_size_ok_for_hw_watchpoint) (byte_count) |
| 1039 | #endif |
| 1040 | |
| 1041 | |
| 1042 | /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 0 |
| 1043 | for write, 1 for read, and 2 for read/write accesses. Returns 0 for |
| 1044 | success, non-zero for failure. */ |
| 1045 | |
| 1046 | #ifndef target_insert_watchpoint |
| 1047 | #define target_insert_watchpoint(addr, len, type) \ |
| 1048 | (*current_target.to_insert_watchpoint) (addr, len, type) |
| 1049 | |
| 1050 | #define target_remove_watchpoint(addr, len, type) \ |
| 1051 | (*current_target.to_remove_watchpoint) (addr, len, type) |
| 1052 | #endif |
| 1053 | |
| 1054 | #ifndef target_insert_hw_breakpoint |
| 1055 | #define target_insert_hw_breakpoint(addr, save) \ |
| 1056 | (*current_target.to_insert_hw_breakpoint) (addr, save) |
| 1057 | |
| 1058 | #define target_remove_hw_breakpoint(addr, save) \ |
| 1059 | (*current_target.to_remove_hw_breakpoint) (addr, save) |
| 1060 | #endif |
| 1061 | |
| 1062 | extern int target_stopped_data_address_p (struct target_ops *); |
| 1063 | |
| 1064 | #ifndef target_stopped_data_address |
| 1065 | #define target_stopped_data_address(target, x) \ |
| 1066 | (*target.to_stopped_data_address) (target, x) |
| 1067 | #else |
| 1068 | /* Horrible hack to get around existing macros :-(. */ |
| 1069 | #define target_stopped_data_address_p(CURRENT_TARGET) (1) |
| 1070 | #endif |
| 1071 | |
| 1072 | /* This will only be defined by a target that supports catching vfork events, |
| 1073 | such as HP-UX. |
| 1074 | |
| 1075 | On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked |
| 1076 | child process after it has exec'd, causes the parent process to resume as |
| 1077 | well. To prevent the parent from running spontaneously, such targets should |
| 1078 | define this to a function that prevents that from happening. */ |
| 1079 | #if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED) |
| 1080 | #define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0) |
| 1081 | #endif |
| 1082 | |
| 1083 | /* This will only be defined by a target that supports catching vfork events, |
| 1084 | such as HP-UX. |
| 1085 | |
| 1086 | On some targets (such as HP-UX 10.20 and earlier), a newly vforked child |
| 1087 | process must be resumed when it delivers its exec event, before the parent |
| 1088 | vfork event will be delivered to us. */ |
| 1089 | |
| 1090 | #if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK) |
| 1091 | #define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0) |
| 1092 | #endif |
| 1093 | |
| 1094 | /* Routines for maintenance of the target structures... |
| 1095 | |
| 1096 | add_target: Add a target to the list of all possible targets. |
| 1097 | |
| 1098 | push_target: Make this target the top of the stack of currently used |
| 1099 | targets, within its particular stratum of the stack. Result |
| 1100 | is 0 if now atop the stack, nonzero if not on top (maybe |
| 1101 | should warn user). |
| 1102 | |
| 1103 | unpush_target: Remove this from the stack of currently used targets, |
| 1104 | no matter where it is on the list. Returns 0 if no |
| 1105 | change, 1 if removed from stack. |
| 1106 | |
| 1107 | pop_target: Remove the top thing on the stack of current targets. */ |
| 1108 | |
| 1109 | extern void add_target (struct target_ops *); |
| 1110 | |
| 1111 | extern int push_target (struct target_ops *); |
| 1112 | |
| 1113 | extern int unpush_target (struct target_ops *); |
| 1114 | |
| 1115 | extern void target_preopen (int); |
| 1116 | |
| 1117 | extern void pop_target (void); |
| 1118 | |
| 1119 | /* Struct section_table maps address ranges to file sections. It is |
| 1120 | mostly used with BFD files, but can be used without (e.g. for handling |
| 1121 | raw disks, or files not in formats handled by BFD). */ |
| 1122 | |
| 1123 | struct section_table |
| 1124 | { |
| 1125 | CORE_ADDR addr; /* Lowest address in section */ |
| 1126 | CORE_ADDR endaddr; /* 1+highest address in section */ |
| 1127 | |
| 1128 | struct bfd_section *the_bfd_section; |
| 1129 | |
| 1130 | bfd *bfd; /* BFD file pointer */ |
| 1131 | }; |
| 1132 | |
| 1133 | /* Return the "section" containing the specified address. */ |
| 1134 | struct section_table *target_section_by_addr (struct target_ops *target, |
| 1135 | CORE_ADDR addr); |
| 1136 | |
| 1137 | |
| 1138 | /* From mem-break.c */ |
| 1139 | |
| 1140 | extern int memory_remove_breakpoint (CORE_ADDR, char *); |
| 1141 | |
| 1142 | extern int memory_insert_breakpoint (CORE_ADDR, char *); |
| 1143 | |
| 1144 | extern int default_memory_remove_breakpoint (CORE_ADDR, char *); |
| 1145 | |
| 1146 | extern int default_memory_insert_breakpoint (CORE_ADDR, char *); |
| 1147 | |
| 1148 | |
| 1149 | /* From target.c */ |
| 1150 | |
| 1151 | extern void initialize_targets (void); |
| 1152 | |
| 1153 | extern void noprocess (void); |
| 1154 | |
| 1155 | extern void find_default_attach (char *, int); |
| 1156 | |
| 1157 | extern void find_default_create_inferior (char *, char *, char **, int); |
| 1158 | |
| 1159 | extern struct target_ops *find_run_target (void); |
| 1160 | |
| 1161 | extern struct target_ops *find_core_target (void); |
| 1162 | |
| 1163 | extern struct target_ops *find_target_beneath (struct target_ops *); |
| 1164 | |
| 1165 | extern int target_resize_to_sections (struct target_ops *target, |
| 1166 | int num_added); |
| 1167 | |
| 1168 | extern void remove_target_sections (bfd *abfd); |
| 1169 | |
| 1170 | \f |
| 1171 | /* Stuff that should be shared among the various remote targets. */ |
| 1172 | |
| 1173 | /* Debugging level. 0 is off, and non-zero values mean to print some debug |
| 1174 | information (higher values, more information). */ |
| 1175 | extern int remote_debug; |
| 1176 | |
| 1177 | /* Speed in bits per second, or -1 which means don't mess with the speed. */ |
| 1178 | extern int baud_rate; |
| 1179 | /* Timeout limit for response from target. */ |
| 1180 | extern int remote_timeout; |
| 1181 | |
| 1182 | \f |
| 1183 | /* Functions for helping to write a native target. */ |
| 1184 | |
| 1185 | /* This is for native targets which use a unix/POSIX-style waitstatus. */ |
| 1186 | extern void store_waitstatus (struct target_waitstatus *, int); |
| 1187 | |
| 1188 | /* Predicate to target_signal_to_host(). Return non-zero if the enum |
| 1189 | targ_signal SIGNO has an equivalent ``host'' representation. */ |
| 1190 | /* FIXME: cagney/1999-11-22: The name below was chosen in preference |
| 1191 | to the shorter target_signal_p() because it is far less ambigious. |
| 1192 | In this context ``target_signal'' refers to GDB's internal |
| 1193 | representation of the target's set of signals while ``host signal'' |
| 1194 | refers to the target operating system's signal. Confused? */ |
| 1195 | |
| 1196 | extern int target_signal_to_host_p (enum target_signal signo); |
| 1197 | |
| 1198 | /* Convert between host signal numbers and enum target_signal's. |
| 1199 | target_signal_to_host() returns 0 and prints a warning() on GDB's |
| 1200 | console if SIGNO has no equivalent host representation. */ |
| 1201 | /* FIXME: cagney/1999-11-22: Here ``host'' is used incorrectly, it is |
| 1202 | refering to the target operating system's signal numbering. |
| 1203 | Similarly, ``enum target_signal'' is named incorrectly, ``enum |
| 1204 | gdb_signal'' would probably be better as it is refering to GDB's |
| 1205 | internal representation of a target operating system's signal. */ |
| 1206 | |
| 1207 | extern enum target_signal target_signal_from_host (int); |
| 1208 | extern int target_signal_to_host (enum target_signal); |
| 1209 | |
| 1210 | /* Convert from a number used in a GDB command to an enum target_signal. */ |
| 1211 | extern enum target_signal target_signal_from_command (int); |
| 1212 | |
| 1213 | /* Any target can call this to switch to remote protocol (in remote.c). */ |
| 1214 | extern void push_remote_target (char *name, int from_tty); |
| 1215 | \f |
| 1216 | /* Imported from machine dependent code */ |
| 1217 | |
| 1218 | /* Blank target vector entries are initialized to target_ignore. */ |
| 1219 | void target_ignore (void); |
| 1220 | |
| 1221 | extern struct target_ops deprecated_child_ops; |
| 1222 | |
| 1223 | #endif /* !defined (TARGET_H) */ |