| 1 | # Copyright 1992-2016 Free Software Foundation, Inc. |
| 2 | |
| 3 | # This program is free software; you can redistribute it and/or modify |
| 4 | # it under the terms of the GNU General Public License as published by |
| 5 | # the Free Software Foundation; either version 3 of the License, or |
| 6 | # (at your option) any later version. |
| 7 | # |
| 8 | # This program is distributed in the hope that it will be useful, |
| 9 | # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 10 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 11 | # GNU General Public License for more details. |
| 12 | # |
| 13 | # You should have received a copy of the GNU General Public License |
| 14 | # along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 15 | |
| 16 | # This file was written by Fred Fish. (fnf@cygnus.com) |
| 17 | |
| 18 | # Generic gdb subroutines that should work for any target. If these |
| 19 | # need to be modified for any target, it can be done with a variable |
| 20 | # or by passing arguments. |
| 21 | |
| 22 | if {$tool == ""} { |
| 23 | # Tests would fail, logs on get_compiler_info() would be missing. |
| 24 | send_error "`site.exp' not found, run `make site.exp'!\n" |
| 25 | exit 2 |
| 26 | } |
| 27 | |
| 28 | load_lib libgloss.exp |
| 29 | load_lib cache.exp |
| 30 | load_lib gdb-utils.exp |
| 31 | |
| 32 | global GDB |
| 33 | |
| 34 | # The spawn ID used for I/O interaction with the inferior. For native |
| 35 | # targets, or remote targets that can do I/O through GDB |
| 36 | # (semi-hosting) this will be the same as the host/GDB's spawn ID. |
| 37 | # Otherwise, the board may set this to some other spawn ID. E.g., |
| 38 | # when debugging with GDBserver, this is set to GDBserver's spawn ID, |
| 39 | # so input/output is done on gdbserver's tty. |
| 40 | global inferior_spawn_id |
| 41 | |
| 42 | if [info exists TOOL_EXECUTABLE] { |
| 43 | set GDB $TOOL_EXECUTABLE |
| 44 | } |
| 45 | if ![info exists GDB] { |
| 46 | if ![is_remote host] { |
| 47 | set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]] |
| 48 | } else { |
| 49 | set GDB [transform gdb] |
| 50 | } |
| 51 | } |
| 52 | verbose "using GDB = $GDB" 2 |
| 53 | |
| 54 | # GDBFLAGS is available for the user to set on the command line. |
| 55 | # E.g. make check RUNTESTFLAGS=GDBFLAGS=mumble |
| 56 | # Testcases may use it to add additional flags, but they must: |
| 57 | # - append new flags, not overwrite |
| 58 | # - restore the original value when done |
| 59 | global GDBFLAGS |
| 60 | if ![info exists GDBFLAGS] { |
| 61 | set GDBFLAGS "" |
| 62 | } |
| 63 | verbose "using GDBFLAGS = $GDBFLAGS" 2 |
| 64 | |
| 65 | # Make the build data directory available to tests. |
| 66 | set BUILD_DATA_DIRECTORY "[pwd]/../data-directory" |
| 67 | |
| 68 | # INTERNAL_GDBFLAGS contains flags that the testsuite requires. |
| 69 | global INTERNAL_GDBFLAGS |
| 70 | if ![info exists INTERNAL_GDBFLAGS] { |
| 71 | set INTERNAL_GDBFLAGS "-nw -nx -data-directory $BUILD_DATA_DIRECTORY" |
| 72 | } |
| 73 | |
| 74 | # The variable gdb_prompt is a regexp which matches the gdb prompt. |
| 75 | # Set it if it is not already set. This is also set by default_gdb_init |
| 76 | # but it's not clear what removing one of them will break. |
| 77 | # See with_gdb_prompt for more details on prompt handling. |
| 78 | global gdb_prompt |
| 79 | if ![info exists gdb_prompt] then { |
| 80 | set gdb_prompt "\\(gdb\\)" |
| 81 | } |
| 82 | |
| 83 | # A regexp that matches the pagination prompt. |
| 84 | set pagination_prompt [string_to_regexp "---Type <return> to continue, or q <return> to quit---"] |
| 85 | |
| 86 | # The variable fullname_syntax_POSIX is a regexp which matches a POSIX |
| 87 | # absolute path ie. /foo/ |
| 88 | set fullname_syntax_POSIX {/[^\n]*/} |
| 89 | # The variable fullname_syntax_UNC is a regexp which matches a Windows |
| 90 | # UNC path ie. \\D\foo\ |
| 91 | set fullname_syntax_UNC {\\\\[^\\]+\\[^\n]+\\} |
| 92 | # The variable fullname_syntax_DOS_CASE is a regexp which matches a |
| 93 | # particular DOS case that GDB most likely will output |
| 94 | # ie. \foo\, but don't match \\.*\ |
| 95 | set fullname_syntax_DOS_CASE {\\[^\\][^\n]*\\} |
| 96 | # The variable fullname_syntax_DOS is a regexp which matches a DOS path |
| 97 | # ie. a:\foo\ && a:foo\ |
| 98 | set fullname_syntax_DOS {[a-zA-Z]:[^\n]*\\} |
| 99 | # The variable fullname_syntax is a regexp which matches what GDB considers |
| 100 | # an absolute path. It is currently debatable if the Windows style paths |
| 101 | # d:foo and \abc should be considered valid as an absolute path. |
| 102 | # Also, the purpse of this regexp is not to recognize a well formed |
| 103 | # absolute path, but to say with certainty that a path is absolute. |
| 104 | set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)" |
| 105 | |
| 106 | # Needed for some tests under Cygwin. |
| 107 | global EXEEXT |
| 108 | global env |
| 109 | |
| 110 | if ![info exists env(EXEEXT)] { |
| 111 | set EXEEXT "" |
| 112 | } else { |
| 113 | set EXEEXT $env(EXEEXT) |
| 114 | } |
| 115 | |
| 116 | set octal "\[0-7\]+" |
| 117 | |
| 118 | set inferior_exited_re "(\\\[Inferior \[0-9\]+ \\(.*\\) exited)" |
| 119 | |
| 120 | # A regular expression that matches a value history number. |
| 121 | # E.g., $1, $2, etc. |
| 122 | set valnum_re "\\\$$decimal" |
| 123 | |
| 124 | ### Only procedures should come after this point. |
| 125 | |
| 126 | # |
| 127 | # gdb_version -- extract and print the version number of GDB |
| 128 | # |
| 129 | proc default_gdb_version {} { |
| 130 | global GDB |
| 131 | global INTERNAL_GDBFLAGS GDBFLAGS |
| 132 | global gdb_prompt |
| 133 | global inotify_pid |
| 134 | |
| 135 | if {[info exists inotify_pid]} { |
| 136 | eval exec kill $inotify_pid |
| 137 | } |
| 138 | |
| 139 | set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --version"] |
| 140 | set tmp [lindex $output 1] |
| 141 | set version "" |
| 142 | regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version |
| 143 | if ![is_remote host] { |
| 144 | clone_output "[which $GDB] version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
| 145 | } else { |
| 146 | clone_output "$GDB on remote host version $version $INTERNAL_GDBFLAGS $GDBFLAGS\n" |
| 147 | } |
| 148 | } |
| 149 | |
| 150 | proc gdb_version { } { |
| 151 | return [default_gdb_version] |
| 152 | } |
| 153 | |
| 154 | # |
| 155 | # gdb_unload -- unload a file if one is loaded |
| 156 | # Return 0 on success, -1 on error. |
| 157 | # |
| 158 | |
| 159 | proc gdb_unload {} { |
| 160 | global verbose |
| 161 | global GDB |
| 162 | global gdb_prompt |
| 163 | send_gdb "file\n" |
| 164 | gdb_expect 60 { |
| 165 | -re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue } |
| 166 | -re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue } |
| 167 | -re "A program is being debugged already.*Are you sure you want to change the file.*y or n. $" { |
| 168 | send_gdb "y\n" |
| 169 | exp_continue |
| 170 | } |
| 171 | -re "Discard symbol table from .*y or n.*$" { |
| 172 | send_gdb "y\n" |
| 173 | exp_continue |
| 174 | } |
| 175 | -re "$gdb_prompt $" {} |
| 176 | timeout { |
| 177 | perror "couldn't unload file in $GDB (timeout)." |
| 178 | return -1 |
| 179 | } |
| 180 | } |
| 181 | return 0 |
| 182 | } |
| 183 | |
| 184 | # Many of the tests depend on setting breakpoints at various places and |
| 185 | # running until that breakpoint is reached. At times, we want to start |
| 186 | # with a clean-slate with respect to breakpoints, so this utility proc |
| 187 | # lets us do this without duplicating this code everywhere. |
| 188 | # |
| 189 | |
| 190 | proc delete_breakpoints {} { |
| 191 | global gdb_prompt |
| 192 | |
| 193 | # we need a larger timeout value here or this thing just confuses |
| 194 | # itself. May need a better implementation if possible. - guo |
| 195 | # |
| 196 | set timeout 100 |
| 197 | |
| 198 | set msg "delete all breakpoints in delete_breakpoints" |
| 199 | set deleted 0 |
| 200 | gdb_test_multiple "delete breakpoints" "$msg" { |
| 201 | -re "Delete all breakpoints.*y or n.*$" { |
| 202 | send_gdb "y\n" |
| 203 | exp_continue |
| 204 | } |
| 205 | -re "$gdb_prompt $" { |
| 206 | set deleted 1 |
| 207 | } |
| 208 | } |
| 209 | |
| 210 | if {$deleted} { |
| 211 | # Confirm with "info breakpoints". |
| 212 | set deleted 0 |
| 213 | set msg "info breakpoints" |
| 214 | gdb_test_multiple $msg $msg { |
| 215 | -re "No breakpoints or watchpoints..*$gdb_prompt $" { |
| 216 | set deleted 1 |
| 217 | } |
| 218 | -re "$gdb_prompt $" { |
| 219 | } |
| 220 | } |
| 221 | } |
| 222 | |
| 223 | if {!$deleted} { |
| 224 | perror "breakpoints not deleted" |
| 225 | } |
| 226 | } |
| 227 | |
| 228 | # Generic run command. |
| 229 | # |
| 230 | # The second pattern below matches up to the first newline *only*. |
| 231 | # Using ``.*$'' could swallow up output that we attempt to match |
| 232 | # elsewhere. |
| 233 | # |
| 234 | # N.B. This function does not wait for gdb to return to the prompt, |
| 235 | # that is the caller's responsibility. |
| 236 | |
| 237 | proc gdb_run_cmd {args} { |
| 238 | global gdb_prompt use_gdb_stub |
| 239 | |
| 240 | foreach command [gdb_init_commands] { |
| 241 | send_gdb "$command\n" |
| 242 | gdb_expect 30 { |
| 243 | -re "$gdb_prompt $" { } |
| 244 | default { |
| 245 | perror "gdb_init_command for target failed" |
| 246 | return |
| 247 | } |
| 248 | } |
| 249 | } |
| 250 | |
| 251 | if $use_gdb_stub { |
| 252 | if [target_info exists gdb,do_reload_on_run] { |
| 253 | if { [gdb_reload] != 0 } { |
| 254 | return |
| 255 | } |
| 256 | send_gdb "continue\n" |
| 257 | gdb_expect 60 { |
| 258 | -re "Continu\[^\r\n\]*\[\r\n\]" {} |
| 259 | default {} |
| 260 | } |
| 261 | return |
| 262 | } |
| 263 | |
| 264 | if [target_info exists gdb,start_symbol] { |
| 265 | set start [target_info gdb,start_symbol] |
| 266 | } else { |
| 267 | set start "start" |
| 268 | } |
| 269 | send_gdb "jump *$start\n" |
| 270 | set start_attempt 1 |
| 271 | while { $start_attempt } { |
| 272 | # Cap (re)start attempts at three to ensure that this loop |
| 273 | # always eventually fails. Don't worry about trying to be |
| 274 | # clever and not send a command when it has failed. |
| 275 | if [expr $start_attempt > 3] { |
| 276 | perror "Jump to start() failed (retry count exceeded)" |
| 277 | return |
| 278 | } |
| 279 | set start_attempt [expr $start_attempt + 1] |
| 280 | gdb_expect 30 { |
| 281 | -re "Continuing at \[^\r\n\]*\[\r\n\]" { |
| 282 | set start_attempt 0 |
| 283 | } |
| 284 | -re "No symbol \"_start\" in current.*$gdb_prompt $" { |
| 285 | perror "Can't find start symbol to run in gdb_run" |
| 286 | return |
| 287 | } |
| 288 | -re "No symbol \"start\" in current.*$gdb_prompt $" { |
| 289 | send_gdb "jump *_start\n" |
| 290 | } |
| 291 | -re "No symbol.*context.*$gdb_prompt $" { |
| 292 | set start_attempt 0 |
| 293 | } |
| 294 | -re "Line.* Jump anyway.*y or n. $" { |
| 295 | send_gdb "y\n" |
| 296 | } |
| 297 | -re "The program is not being run.*$gdb_prompt $" { |
| 298 | if { [gdb_reload] != 0 } { |
| 299 | return |
| 300 | } |
| 301 | send_gdb "jump *$start\n" |
| 302 | } |
| 303 | timeout { |
| 304 | perror "Jump to start() failed (timeout)" |
| 305 | return |
| 306 | } |
| 307 | } |
| 308 | } |
| 309 | return |
| 310 | } |
| 311 | |
| 312 | if [target_info exists gdb,do_reload_on_run] { |
| 313 | if { [gdb_reload] != 0 } { |
| 314 | return |
| 315 | } |
| 316 | } |
| 317 | send_gdb "run $args\n" |
| 318 | # This doesn't work quite right yet. |
| 319 | # Use -notransfer here so that test cases (like chng-sym.exp) |
| 320 | # may test for additional start-up messages. |
| 321 | gdb_expect 60 { |
| 322 | -re "The program .* has been started already.*y or n. $" { |
| 323 | send_gdb "y\n" |
| 324 | exp_continue |
| 325 | } |
| 326 | -notransfer -re "Starting program: \[^\r\n\]*" {} |
| 327 | -notransfer -re "$gdb_prompt $" { |
| 328 | # There is no more input expected. |
| 329 | } |
| 330 | } |
| 331 | } |
| 332 | |
| 333 | # Generic start command. Return 0 if we could start the program, -1 |
| 334 | # if we could not. |
| 335 | # |
| 336 | # N.B. This function does not wait for gdb to return to the prompt, |
| 337 | # that is the caller's responsibility. |
| 338 | |
| 339 | proc gdb_start_cmd {args} { |
| 340 | global gdb_prompt use_gdb_stub |
| 341 | |
| 342 | foreach command [gdb_init_commands] { |
| 343 | send_gdb "$command\n" |
| 344 | gdb_expect 30 { |
| 345 | -re "$gdb_prompt $" { } |
| 346 | default { |
| 347 | perror "gdb_init_command for target failed" |
| 348 | return -1 |
| 349 | } |
| 350 | } |
| 351 | } |
| 352 | |
| 353 | if $use_gdb_stub { |
| 354 | return -1 |
| 355 | } |
| 356 | |
| 357 | send_gdb "start $args\n" |
| 358 | # Use -notransfer here so that test cases (like chng-sym.exp) |
| 359 | # may test for additional start-up messages. |
| 360 | gdb_expect 60 { |
| 361 | -re "The program .* has been started already.*y or n. $" { |
| 362 | send_gdb "y\n" |
| 363 | exp_continue |
| 364 | } |
| 365 | -notransfer -re "Starting program: \[^\r\n\]*" { |
| 366 | return 0 |
| 367 | } |
| 368 | } |
| 369 | return -1 |
| 370 | } |
| 371 | |
| 372 | # Set a breakpoint at FUNCTION. If there is an additional argument it is |
| 373 | # a list of options; the supported options are allow-pending, temporary, |
| 374 | # message, no-message, and passfail. |
| 375 | # The result is 1 for success, 0 for failure. |
| 376 | # |
| 377 | # Note: The handling of message vs no-message is messed up, but it's based |
| 378 | # on historical usage. By default this function does not print passes, |
| 379 | # only fails. |
| 380 | # no-message: turns off printing of fails (and passes, but they're already off) |
| 381 | # message: turns on printing of passes (and fails, but they're already on) |
| 382 | |
| 383 | proc gdb_breakpoint { function args } { |
| 384 | global gdb_prompt |
| 385 | global decimal |
| 386 | |
| 387 | set pending_response n |
| 388 | if {[lsearch -exact $args allow-pending] != -1} { |
| 389 | set pending_response y |
| 390 | } |
| 391 | |
| 392 | set break_command "break" |
| 393 | set break_message "Breakpoint" |
| 394 | if {[lsearch -exact $args temporary] != -1} { |
| 395 | set break_command "tbreak" |
| 396 | set break_message "Temporary breakpoint" |
| 397 | } |
| 398 | |
| 399 | set print_pass 0 |
| 400 | set print_fail 1 |
| 401 | set no_message_loc [lsearch -exact $args no-message] |
| 402 | set message_loc [lsearch -exact $args message] |
| 403 | # The last one to appear in args wins. |
| 404 | if { $no_message_loc > $message_loc } { |
| 405 | set print_fail 0 |
| 406 | } elseif { $message_loc > $no_message_loc } { |
| 407 | set print_pass 1 |
| 408 | } |
| 409 | |
| 410 | set test_name "setting breakpoint at $function" |
| 411 | |
| 412 | send_gdb "$break_command $function\n" |
| 413 | # The first two regexps are what we get with -g, the third is without -g. |
| 414 | gdb_expect 30 { |
| 415 | -re "$break_message \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {} |
| 416 | -re "$break_message \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {} |
| 417 | -re "$break_message \[0-9\]* at .*$gdb_prompt $" {} |
| 418 | -re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" { |
| 419 | if {$pending_response == "n"} { |
| 420 | if { $print_fail } { |
| 421 | fail $test_name |
| 422 | } |
| 423 | return 0 |
| 424 | } |
| 425 | } |
| 426 | -re "Make breakpoint pending.*y or \\\[n\\\]. $" { |
| 427 | send_gdb "$pending_response\n" |
| 428 | exp_continue |
| 429 | } |
| 430 | -re "A problem internal to GDB has been detected" { |
| 431 | if { $print_fail } { |
| 432 | fail "$test_name (GDB internal error)" |
| 433 | } |
| 434 | gdb_internal_error_resync |
| 435 | return 0 |
| 436 | } |
| 437 | -re "$gdb_prompt $" { |
| 438 | if { $print_fail } { |
| 439 | fail $test_name |
| 440 | } |
| 441 | return 0 |
| 442 | } |
| 443 | eof { |
| 444 | if { $print_fail } { |
| 445 | fail "$test_name (eof)" |
| 446 | } |
| 447 | return 0 |
| 448 | } |
| 449 | timeout { |
| 450 | if { $print_fail } { |
| 451 | fail "$test_name (timeout)" |
| 452 | } |
| 453 | return 0 |
| 454 | } |
| 455 | } |
| 456 | if { $print_pass } { |
| 457 | pass $test_name |
| 458 | } |
| 459 | return 1 |
| 460 | } |
| 461 | |
| 462 | # Set breakpoint at function and run gdb until it breaks there. |
| 463 | # Since this is the only breakpoint that will be set, if it stops |
| 464 | # at a breakpoint, we will assume it is the one we want. We can't |
| 465 | # just compare to "function" because it might be a fully qualified, |
| 466 | # single quoted C++ function specifier. |
| 467 | # |
| 468 | # If there are additional arguments, pass them to gdb_breakpoint. |
| 469 | # We recognize no-message/message ourselves. |
| 470 | # The default is no-message. |
| 471 | # no-message is messed up here, like gdb_breakpoint: to preserve |
| 472 | # historical usage fails are always printed by default. |
| 473 | # no-message: turns off printing of fails (and passes, but they're already off) |
| 474 | # message: turns on printing of passes (and fails, but they're already on) |
| 475 | |
| 476 | proc runto { function args } { |
| 477 | global gdb_prompt |
| 478 | global decimal |
| 479 | |
| 480 | delete_breakpoints |
| 481 | |
| 482 | # Default to "no-message". |
| 483 | set args "no-message $args" |
| 484 | |
| 485 | set print_pass 0 |
| 486 | set print_fail 1 |
| 487 | set no_message_loc [lsearch -exact $args no-message] |
| 488 | set message_loc [lsearch -exact $args message] |
| 489 | # The last one to appear in args wins. |
| 490 | if { $no_message_loc > $message_loc } { |
| 491 | set print_fail 0 |
| 492 | } elseif { $message_loc > $no_message_loc } { |
| 493 | set print_pass 1 |
| 494 | } |
| 495 | |
| 496 | set test_name "running to $function in runto" |
| 497 | |
| 498 | # We need to use eval here to pass our varargs args to gdb_breakpoint |
| 499 | # which is also a varargs function. |
| 500 | # But we also have to be careful because $function may have multiple |
| 501 | # elements, and we don't want Tcl to move the remaining elements after |
| 502 | # the first to $args. That is why $function is wrapped in {}. |
| 503 | if ![eval gdb_breakpoint {$function} $args] { |
| 504 | return 0 |
| 505 | } |
| 506 | |
| 507 | gdb_run_cmd |
| 508 | |
| 509 | # the "at foo.c:36" output we get with -g. |
| 510 | # the "in func" output we get without -g. |
| 511 | gdb_expect 30 { |
| 512 | -re "Break.* at .*:$decimal.*$gdb_prompt $" { |
| 513 | if { $print_pass } { |
| 514 | pass $test_name |
| 515 | } |
| 516 | return 1 |
| 517 | } |
| 518 | -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { |
| 519 | if { $print_pass } { |
| 520 | pass $test_name |
| 521 | } |
| 522 | return 1 |
| 523 | } |
| 524 | -re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" { |
| 525 | if { $print_fail } { |
| 526 | unsupported "Non-stop mode not supported" |
| 527 | } |
| 528 | return 0 |
| 529 | } |
| 530 | -re ".*A problem internal to GDB has been detected" { |
| 531 | if { $print_fail } { |
| 532 | fail "$test_name (GDB internal error)" |
| 533 | } |
| 534 | gdb_internal_error_resync |
| 535 | return 0 |
| 536 | } |
| 537 | -re "$gdb_prompt $" { |
| 538 | if { $print_fail } { |
| 539 | fail $test_name |
| 540 | } |
| 541 | return 0 |
| 542 | } |
| 543 | eof { |
| 544 | if { $print_fail } { |
| 545 | fail "$test_name (eof)" |
| 546 | } |
| 547 | return 0 |
| 548 | } |
| 549 | timeout { |
| 550 | if { $print_fail } { |
| 551 | fail "$test_name (timeout)" |
| 552 | } |
| 553 | return 0 |
| 554 | } |
| 555 | } |
| 556 | if { $print_pass } { |
| 557 | pass $test_name |
| 558 | } |
| 559 | return 1 |
| 560 | } |
| 561 | |
| 562 | # Ask gdb to run until we hit a breakpoint at main. |
| 563 | # |
| 564 | # N.B. This function deletes all existing breakpoints. |
| 565 | # If you don't want that, use gdb_start_cmd. |
| 566 | |
| 567 | proc runto_main { } { |
| 568 | return [runto main no-message] |
| 569 | } |
| 570 | |
| 571 | ### Continue, and expect to hit a breakpoint. |
| 572 | ### Report a pass or fail, depending on whether it seems to have |
| 573 | ### worked. Use NAME as part of the test name; each call to |
| 574 | ### continue_to_breakpoint should use a NAME which is unique within |
| 575 | ### that test file. |
| 576 | proc gdb_continue_to_breakpoint {name {location_pattern .*}} { |
| 577 | global gdb_prompt |
| 578 | set full_name "continue to breakpoint: $name" |
| 579 | |
| 580 | gdb_test_multiple "continue" $full_name { |
| 581 | -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" { |
| 582 | pass $full_name |
| 583 | } |
| 584 | } |
| 585 | } |
| 586 | |
| 587 | |
| 588 | # gdb_internal_error_resync: |
| 589 | # |
| 590 | # Answer the questions GDB asks after it reports an internal error |
| 591 | # until we get back to a GDB prompt. Decline to quit the debugging |
| 592 | # session, and decline to create a core file. Return non-zero if the |
| 593 | # resync succeeds. |
| 594 | # |
| 595 | # This procedure just answers whatever questions come up until it sees |
| 596 | # a GDB prompt; it doesn't require you to have matched the input up to |
| 597 | # any specific point. However, it only answers questions it sees in |
| 598 | # the output itself, so if you've matched a question, you had better |
| 599 | # answer it yourself before calling this. |
| 600 | # |
| 601 | # You can use this function thus: |
| 602 | # |
| 603 | # gdb_expect { |
| 604 | # ... |
| 605 | # -re ".*A problem internal to GDB has been detected" { |
| 606 | # gdb_internal_error_resync |
| 607 | # } |
| 608 | # ... |
| 609 | # } |
| 610 | # |
| 611 | proc gdb_internal_error_resync {} { |
| 612 | global gdb_prompt |
| 613 | |
| 614 | verbose -log "Resyncing due to internal error." |
| 615 | |
| 616 | set count 0 |
| 617 | while {$count < 10} { |
| 618 | gdb_expect { |
| 619 | -re "Quit this debugging session\\? \\(y or n\\) $" { |
| 620 | send_gdb "n\n" |
| 621 | incr count |
| 622 | } |
| 623 | -re "Create a core file of GDB\\? \\(y or n\\) $" { |
| 624 | send_gdb "n\n" |
| 625 | incr count |
| 626 | } |
| 627 | -re "$gdb_prompt $" { |
| 628 | # We're resynchronized. |
| 629 | return 1 |
| 630 | } |
| 631 | timeout { |
| 632 | perror "Could not resync from internal error (timeout)" |
| 633 | return 0 |
| 634 | } |
| 635 | } |
| 636 | } |
| 637 | perror "Could not resync from internal error (resync count exceeded)" |
| 638 | return 0 |
| 639 | } |
| 640 | |
| 641 | |
| 642 | # gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS |
| 643 | # Send a command to gdb; test the result. |
| 644 | # |
| 645 | # COMMAND is the command to execute, send to GDB with send_gdb. If |
| 646 | # this is the null string no command is sent. |
| 647 | # MESSAGE is a message to be printed with the built-in failure patterns |
| 648 | # if one of them matches. If MESSAGE is empty COMMAND will be used. |
| 649 | # EXPECT_ARGUMENTS will be fed to expect in addition to the standard |
| 650 | # patterns. Pattern elements will be evaluated in the caller's |
| 651 | # context; action elements will be executed in the caller's context. |
| 652 | # Unlike patterns for gdb_test, these patterns should generally include |
| 653 | # the final newline and prompt. |
| 654 | # |
| 655 | # Returns: |
| 656 | # 1 if the test failed, according to a built-in failure pattern |
| 657 | # 0 if only user-supplied patterns matched |
| 658 | # -1 if there was an internal error. |
| 659 | # |
| 660 | # You can use this function thus: |
| 661 | # |
| 662 | # gdb_test_multiple "print foo" "test foo" { |
| 663 | # -re "expected output 1" { |
| 664 | # pass "print foo" |
| 665 | # } |
| 666 | # -re "expected output 2" { |
| 667 | # fail "print foo" |
| 668 | # } |
| 669 | # } |
| 670 | # |
| 671 | # Like with "expect", you can also specify the spawn id to match with |
| 672 | # -i "$id". Interesting spawn ids are $inferior_spawn_id and |
| 673 | # $gdb_spawn_id. The former matches inferior I/O, while the latter |
| 674 | # matches GDB I/O. E.g.: |
| 675 | # |
| 676 | # send_inferior "hello\n" |
| 677 | # gdb_test_multiple "continue" "test echo" { |
| 678 | # -i "$inferior_spawn_id" -re "^hello\r\nhello\r\n$" { |
| 679 | # pass "got echo" |
| 680 | # } |
| 681 | # -i "$gdb_spawn_id" -re "Breakpoint.*$gdb_prompt $" { |
| 682 | # fail "hit breakpoint" |
| 683 | # } |
| 684 | # } |
| 685 | # |
| 686 | # The standard patterns, such as "Inferior exited..." and "A problem |
| 687 | # ...", all being implicitly appended to that list. These are always |
| 688 | # expected from $gdb_spawn_id. IOW, callers do not need to worry |
| 689 | # about resetting "-i" back to $gdb_spawn_id explicitly. |
| 690 | # |
| 691 | proc gdb_test_multiple { command message user_code } { |
| 692 | global verbose use_gdb_stub |
| 693 | global gdb_prompt pagination_prompt |
| 694 | global GDB |
| 695 | global gdb_spawn_id |
| 696 | global inferior_exited_re |
| 697 | upvar timeout timeout |
| 698 | upvar expect_out expect_out |
| 699 | global any_spawn_id |
| 700 | |
| 701 | if { $message == "" } { |
| 702 | set message $command |
| 703 | } |
| 704 | |
| 705 | if [string match "*\[\r\n\]" $command] { |
| 706 | error "Invalid trailing newline in \"$message\" test" |
| 707 | } |
| 708 | |
| 709 | if [string match "*\[\r\n\]*" $message] { |
| 710 | error "Invalid newline in \"$message\" test" |
| 711 | } |
| 712 | |
| 713 | if {$use_gdb_stub |
| 714 | && [regexp -nocase {^\s*(r|run|star|start|at|att|atta|attac|attach)\M} \ |
| 715 | $command]} { |
| 716 | error "gdbserver does not support $command without extended-remote" |
| 717 | } |
| 718 | |
| 719 | # TCL/EXPECT WART ALERT |
| 720 | # Expect does something very strange when it receives a single braced |
| 721 | # argument. It splits it along word separators and performs substitutions. |
| 722 | # This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is |
| 723 | # evaluated as "\[ab\]". But that's not how TCL normally works; inside a |
| 724 | # double-quoted list item, "\[ab\]" is just a long way of representing |
| 725 | # "[ab]", because the backslashes will be removed by lindex. |
| 726 | |
| 727 | # Unfortunately, there appears to be no easy way to duplicate the splitting |
| 728 | # that expect will do from within TCL. And many places make use of the |
| 729 | # "\[0-9\]" construct, so we need to support that; and some places make use |
| 730 | # of the "[func]" construct, so we need to support that too. In order to |
| 731 | # get this right we have to substitute quoted list elements differently |
| 732 | # from braced list elements. |
| 733 | |
| 734 | # We do this roughly the same way that Expect does it. We have to use two |
| 735 | # lists, because if we leave unquoted newlines in the argument to uplevel |
| 736 | # they'll be treated as command separators, and if we escape newlines |
| 737 | # we mangle newlines inside of command blocks. This assumes that the |
| 738 | # input doesn't contain a pattern which contains actual embedded newlines |
| 739 | # at this point! |
| 740 | |
| 741 | regsub -all {\n} ${user_code} { } subst_code |
| 742 | set subst_code [uplevel list $subst_code] |
| 743 | |
| 744 | set processed_code "" |
| 745 | set patterns "" |
| 746 | set expecting_action 0 |
| 747 | set expecting_arg 0 |
| 748 | foreach item $user_code subst_item $subst_code { |
| 749 | if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } { |
| 750 | lappend processed_code $item |
| 751 | continue |
| 752 | } |
| 753 | if { $item == "-indices" || $item == "-re" || $item == "-ex" } { |
| 754 | lappend processed_code $item |
| 755 | continue |
| 756 | } |
| 757 | if { $item == "-timeout" || $item == "-i" } { |
| 758 | set expecting_arg 1 |
| 759 | lappend processed_code $item |
| 760 | continue |
| 761 | } |
| 762 | if { $expecting_arg } { |
| 763 | set expecting_arg 0 |
| 764 | lappend processed_code $subst_item |
| 765 | continue |
| 766 | } |
| 767 | if { $expecting_action } { |
| 768 | lappend processed_code "uplevel [list $item]" |
| 769 | set expecting_action 0 |
| 770 | # Cosmetic, no effect on the list. |
| 771 | append processed_code "\n" |
| 772 | continue |
| 773 | } |
| 774 | set expecting_action 1 |
| 775 | lappend processed_code $subst_item |
| 776 | if {$patterns != ""} { |
| 777 | append patterns "; " |
| 778 | } |
| 779 | append patterns "\"$subst_item\"" |
| 780 | } |
| 781 | |
| 782 | # Also purely cosmetic. |
| 783 | regsub -all {\r} $patterns {\\r} patterns |
| 784 | regsub -all {\n} $patterns {\\n} patterns |
| 785 | |
| 786 | if $verbose>2 then { |
| 787 | send_user "Sending \"$command\" to gdb\n" |
| 788 | send_user "Looking to match \"$patterns\"\n" |
| 789 | send_user "Message is \"$message\"\n" |
| 790 | } |
| 791 | |
| 792 | set result -1 |
| 793 | set string "${command}\n" |
| 794 | if { $command != "" } { |
| 795 | set multi_line_re "\[\r\n\] *>" |
| 796 | while { "$string" != "" } { |
| 797 | set foo [string first "\n" "$string"] |
| 798 | set len [string length "$string"] |
| 799 | if { $foo < [expr $len - 1] } { |
| 800 | set str [string range "$string" 0 $foo] |
| 801 | if { [send_gdb "$str"] != "" } { |
| 802 | global suppress_flag |
| 803 | |
| 804 | if { ! $suppress_flag } { |
| 805 | perror "Couldn't send $command to GDB." |
| 806 | } |
| 807 | fail "$message" |
| 808 | return $result |
| 809 | } |
| 810 | # since we're checking if each line of the multi-line |
| 811 | # command are 'accepted' by GDB here, |
| 812 | # we need to set -notransfer expect option so that |
| 813 | # command output is not lost for pattern matching |
| 814 | # - guo |
| 815 | gdb_expect 2 { |
| 816 | -notransfer -re "$multi_line_re$" { verbose "partial: match" 3 } |
| 817 | timeout { verbose "partial: timeout" 3 } |
| 818 | } |
| 819 | set string [string range "$string" [expr $foo + 1] end] |
| 820 | set multi_line_re "$multi_line_re.*\[\r\n\] *>" |
| 821 | } else { |
| 822 | break |
| 823 | } |
| 824 | } |
| 825 | if { "$string" != "" } { |
| 826 | if { [send_gdb "$string"] != "" } { |
| 827 | global suppress_flag |
| 828 | |
| 829 | if { ! $suppress_flag } { |
| 830 | perror "Couldn't send $command to GDB." |
| 831 | } |
| 832 | fail "$message" |
| 833 | return $result |
| 834 | } |
| 835 | } |
| 836 | } |
| 837 | |
| 838 | set code { |
| 839 | -re ".*A problem internal to GDB has been detected" { |
| 840 | fail "$message (GDB internal error)" |
| 841 | gdb_internal_error_resync |
| 842 | set result -1 |
| 843 | } |
| 844 | -re "\\*\\*\\* DOSEXIT code.*" { |
| 845 | if { $message != "" } { |
| 846 | fail "$message" |
| 847 | } |
| 848 | gdb_suppress_entire_file "GDB died" |
| 849 | set result -1 |
| 850 | } |
| 851 | } |
| 852 | append code $processed_code |
| 853 | append code { |
| 854 | # Reset the spawn id, in case the processed code used -i. |
| 855 | -i "$gdb_spawn_id" |
| 856 | |
| 857 | -re "Ending remote debugging.*$gdb_prompt $" { |
| 858 | if ![isnative] then { |
| 859 | warning "Can`t communicate to remote target." |
| 860 | } |
| 861 | gdb_exit |
| 862 | gdb_start |
| 863 | set result -1 |
| 864 | } |
| 865 | -re "Undefined\[a-z\]* command:.*$gdb_prompt $" { |
| 866 | perror "Undefined command \"$command\"." |
| 867 | fail "$message" |
| 868 | set result 1 |
| 869 | } |
| 870 | -re "Ambiguous command.*$gdb_prompt $" { |
| 871 | perror "\"$command\" is not a unique command name." |
| 872 | fail "$message" |
| 873 | set result 1 |
| 874 | } |
| 875 | -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" { |
| 876 | if ![string match "" $message] then { |
| 877 | set errmsg "$message (the program exited)" |
| 878 | } else { |
| 879 | set errmsg "$command (the program exited)" |
| 880 | } |
| 881 | fail "$errmsg" |
| 882 | set result -1 |
| 883 | } |
| 884 | -re "$inferior_exited_re normally.*$gdb_prompt $" { |
| 885 | if ![string match "" $message] then { |
| 886 | set errmsg "$message (the program exited)" |
| 887 | } else { |
| 888 | set errmsg "$command (the program exited)" |
| 889 | } |
| 890 | fail "$errmsg" |
| 891 | set result -1 |
| 892 | } |
| 893 | -re "The program is not being run.*$gdb_prompt $" { |
| 894 | if ![string match "" $message] then { |
| 895 | set errmsg "$message (the program is no longer running)" |
| 896 | } else { |
| 897 | set errmsg "$command (the program is no longer running)" |
| 898 | } |
| 899 | fail "$errmsg" |
| 900 | set result -1 |
| 901 | } |
| 902 | -re "\r\n$gdb_prompt $" { |
| 903 | if ![string match "" $message] then { |
| 904 | fail "$message" |
| 905 | } |
| 906 | set result 1 |
| 907 | } |
| 908 | -re "$pagination_prompt" { |
| 909 | send_gdb "\n" |
| 910 | perror "Window too small." |
| 911 | fail "$message" |
| 912 | set result -1 |
| 913 | } |
| 914 | -re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " { |
| 915 | send_gdb "n\n" |
| 916 | gdb_expect -re "$gdb_prompt $" |
| 917 | fail "$message (got interactive prompt)" |
| 918 | set result -1 |
| 919 | } |
| 920 | -re "\\\[0\\\] cancel\r\n\\\[1\\\] all.*\r\n> $" { |
| 921 | send_gdb "0\n" |
| 922 | gdb_expect -re "$gdb_prompt $" |
| 923 | fail "$message (got breakpoint menu)" |
| 924 | set result -1 |
| 925 | } |
| 926 | |
| 927 | # Patterns below apply to any spawn id specified. |
| 928 | -i $any_spawn_id |
| 929 | eof { |
| 930 | perror "Process no longer exists" |
| 931 | if { $message != "" } { |
| 932 | fail "$message" |
| 933 | } |
| 934 | return -1 |
| 935 | } |
| 936 | full_buffer { |
| 937 | perror "internal buffer is full." |
| 938 | fail "$message" |
| 939 | set result -1 |
| 940 | } |
| 941 | timeout { |
| 942 | if ![string match "" $message] then { |
| 943 | fail "$message (timeout)" |
| 944 | } |
| 945 | set result 1 |
| 946 | } |
| 947 | } |
| 948 | |
| 949 | set result 0 |
| 950 | set code [catch {gdb_expect $code} string] |
| 951 | if {$code == 1} { |
| 952 | global errorInfo errorCode |
| 953 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string |
| 954 | } elseif {$code > 1} { |
| 955 | return -code $code $string |
| 956 | } |
| 957 | return $result |
| 958 | } |
| 959 | |
| 960 | # gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE |
| 961 | # Send a command to gdb; test the result. |
| 962 | # |
| 963 | # COMMAND is the command to execute, send to GDB with send_gdb. If |
| 964 | # this is the null string no command is sent. |
| 965 | # PATTERN is the pattern to match for a PASS, and must NOT include |
| 966 | # the \r\n sequence immediately before the gdb prompt. This argument |
| 967 | # may be omitted to just match the prompt, ignoring whatever output |
| 968 | # precedes it. |
| 969 | # MESSAGE is an optional message to be printed. If this is |
| 970 | # omitted, then the pass/fail messages use the command string as the |
| 971 | # message. (If this is the empty string, then sometimes we don't |
| 972 | # call pass or fail at all; I don't understand this at all.) |
| 973 | # QUESTION is a question GDB may ask in response to COMMAND, like |
| 974 | # "are you sure?" |
| 975 | # RESPONSE is the response to send if QUESTION appears. |
| 976 | # |
| 977 | # Returns: |
| 978 | # 1 if the test failed, |
| 979 | # 0 if the test passes, |
| 980 | # -1 if there was an internal error. |
| 981 | # |
| 982 | proc gdb_test { args } { |
| 983 | global gdb_prompt |
| 984 | upvar timeout timeout |
| 985 | |
| 986 | if [llength $args]>2 then { |
| 987 | set message [lindex $args 2] |
| 988 | } else { |
| 989 | set message [lindex $args 0] |
| 990 | } |
| 991 | set command [lindex $args 0] |
| 992 | set pattern [lindex $args 1] |
| 993 | |
| 994 | if [llength $args]==5 { |
| 995 | set question_string [lindex $args 3] |
| 996 | set response_string [lindex $args 4] |
| 997 | } else { |
| 998 | set question_string "^FOOBAR$" |
| 999 | } |
| 1000 | |
| 1001 | return [gdb_test_multiple $command $message { |
| 1002 | -re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" { |
| 1003 | if ![string match "" $message] then { |
| 1004 | pass "$message" |
| 1005 | } |
| 1006 | } |
| 1007 | -re "(${question_string})$" { |
| 1008 | send_gdb "$response_string\n" |
| 1009 | exp_continue |
| 1010 | } |
| 1011 | }] |
| 1012 | } |
| 1013 | |
| 1014 | # gdb_test_no_output COMMAND MESSAGE |
| 1015 | # Send a command to GDB and verify that this command generated no output. |
| 1016 | # |
| 1017 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE |
| 1018 | # parameters. If MESSAGE is ommitted, then COMMAND will be used as |
| 1019 | # the message. (If MESSAGE is the empty string, then sometimes we do not |
| 1020 | # call pass or fail at all; I don't understand this at all.) |
| 1021 | |
| 1022 | proc gdb_test_no_output { args } { |
| 1023 | global gdb_prompt |
| 1024 | set command [lindex $args 0] |
| 1025 | if [llength $args]>1 then { |
| 1026 | set message [lindex $args 1] |
| 1027 | } else { |
| 1028 | set message $command |
| 1029 | } |
| 1030 | |
| 1031 | set command_regex [string_to_regexp $command] |
| 1032 | gdb_test_multiple $command $message { |
| 1033 | -re "^$command_regex\r\n$gdb_prompt $" { |
| 1034 | if ![string match "" $message] then { |
| 1035 | pass "$message" |
| 1036 | } |
| 1037 | } |
| 1038 | } |
| 1039 | } |
| 1040 | |
| 1041 | # Send a command and then wait for a sequence of outputs. |
| 1042 | # This is useful when the sequence is long and contains ".*", a single |
| 1043 | # regexp to match the entire output can get a timeout much easier. |
| 1044 | # |
| 1045 | # COMMAND is the command to send. |
| 1046 | # TEST_NAME is passed to pass/fail. COMMAND is used if TEST_NAME is "". |
| 1047 | # EXPECTED_OUTPUT_LIST is a list of regexps of expected output, which are |
| 1048 | # processed in order, and all must be present in the output. |
| 1049 | # |
| 1050 | # It is unnecessary to specify ".*" at the beginning or end of any regexp, |
| 1051 | # there is an implicit ".*" between each element of EXPECTED_OUTPUT_LIST. |
| 1052 | # There is also an implicit ".*" between the last regexp and the gdb prompt. |
| 1053 | # |
| 1054 | # Like gdb_test and gdb_test_multiple, the output is expected to end with the |
| 1055 | # gdb prompt, which must not be specified in EXPECTED_OUTPUT_LIST. |
| 1056 | # |
| 1057 | # Returns: |
| 1058 | # 1 if the test failed, |
| 1059 | # 0 if the test passes, |
| 1060 | # -1 if there was an internal error. |
| 1061 | |
| 1062 | proc gdb_test_sequence { command test_name expected_output_list } { |
| 1063 | global gdb_prompt |
| 1064 | if { $test_name == "" } { |
| 1065 | set test_name $command |
| 1066 | } |
| 1067 | lappend expected_output_list ""; # implicit ".*" before gdb prompt |
| 1068 | send_gdb "$command\n" |
| 1069 | return [gdb_expect_list $test_name "$gdb_prompt $" $expected_output_list] |
| 1070 | } |
| 1071 | |
| 1072 | \f |
| 1073 | # Test that a command gives an error. For pass or fail, return |
| 1074 | # a 1 to indicate that more tests can proceed. However a timeout |
| 1075 | # is a serious error, generates a special fail message, and causes |
| 1076 | # a 0 to be returned to indicate that more tests are likely to fail |
| 1077 | # as well. |
| 1078 | |
| 1079 | proc test_print_reject { args } { |
| 1080 | global gdb_prompt |
| 1081 | global verbose |
| 1082 | |
| 1083 | if [llength $args]==2 then { |
| 1084 | set expectthis [lindex $args 1] |
| 1085 | } else { |
| 1086 | set expectthis "should never match this bogus string" |
| 1087 | } |
| 1088 | set sendthis [lindex $args 0] |
| 1089 | if $verbose>2 then { |
| 1090 | send_user "Sending \"$sendthis\" to gdb\n" |
| 1091 | send_user "Looking to match \"$expectthis\"\n" |
| 1092 | } |
| 1093 | send_gdb "$sendthis\n" |
| 1094 | #FIXME: Should add timeout as parameter. |
| 1095 | gdb_expect { |
| 1096 | -re "A .* in expression.*\\.*$gdb_prompt $" { |
| 1097 | pass "reject $sendthis" |
| 1098 | return 1 |
| 1099 | } |
| 1100 | -re "Invalid syntax in expression.*$gdb_prompt $" { |
| 1101 | pass "reject $sendthis" |
| 1102 | return 1 |
| 1103 | } |
| 1104 | -re "Junk after end of expression.*$gdb_prompt $" { |
| 1105 | pass "reject $sendthis" |
| 1106 | return 1 |
| 1107 | } |
| 1108 | -re "Invalid number.*$gdb_prompt $" { |
| 1109 | pass "reject $sendthis" |
| 1110 | return 1 |
| 1111 | } |
| 1112 | -re "Invalid character constant.*$gdb_prompt $" { |
| 1113 | pass "reject $sendthis" |
| 1114 | return 1 |
| 1115 | } |
| 1116 | -re "No symbol table is loaded.*$gdb_prompt $" { |
| 1117 | pass "reject $sendthis" |
| 1118 | return 1 |
| 1119 | } |
| 1120 | -re "No symbol .* in current context.*$gdb_prompt $" { |
| 1121 | pass "reject $sendthis" |
| 1122 | return 1 |
| 1123 | } |
| 1124 | -re "Unmatched single quote.*$gdb_prompt $" { |
| 1125 | pass "reject $sendthis" |
| 1126 | return 1 |
| 1127 | } |
| 1128 | -re "A character constant must contain at least one character.*$gdb_prompt $" { |
| 1129 | pass "reject $sendthis" |
| 1130 | return 1 |
| 1131 | } |
| 1132 | -re "$expectthis.*$gdb_prompt $" { |
| 1133 | pass "reject $sendthis" |
| 1134 | return 1 |
| 1135 | } |
| 1136 | -re ".*$gdb_prompt $" { |
| 1137 | fail "reject $sendthis" |
| 1138 | return 1 |
| 1139 | } |
| 1140 | default { |
| 1141 | fail "reject $sendthis (eof or timeout)" |
| 1142 | return 0 |
| 1143 | } |
| 1144 | } |
| 1145 | } |
| 1146 | \f |
| 1147 | |
| 1148 | # Same as gdb_test, but the second parameter is not a regexp, |
| 1149 | # but a string that must match exactly. |
| 1150 | |
| 1151 | proc gdb_test_exact { args } { |
| 1152 | upvar timeout timeout |
| 1153 | |
| 1154 | set command [lindex $args 0] |
| 1155 | |
| 1156 | # This applies a special meaning to a null string pattern. Without |
| 1157 | # this, "$pattern\r\n$gdb_prompt $" will match anything, including error |
| 1158 | # messages from commands that should have no output except a new |
| 1159 | # prompt. With this, only results of a null string will match a null |
| 1160 | # string pattern. |
| 1161 | |
| 1162 | set pattern [lindex $args 1] |
| 1163 | if [string match $pattern ""] { |
| 1164 | set pattern [string_to_regexp [lindex $args 0]] |
| 1165 | } else { |
| 1166 | set pattern [string_to_regexp [lindex $args 1]] |
| 1167 | } |
| 1168 | |
| 1169 | # It is most natural to write the pattern argument with only |
| 1170 | # embedded \n's, especially if you are trying to avoid Tcl quoting |
| 1171 | # problems. But gdb_expect really wants to see \r\n in patterns. So |
| 1172 | # transform the pattern here. First transform \r\n back to \n, in |
| 1173 | # case some users of gdb_test_exact already do the right thing. |
| 1174 | regsub -all "\r\n" $pattern "\n" pattern |
| 1175 | regsub -all "\n" $pattern "\r\n" pattern |
| 1176 | if [llength $args]==3 then { |
| 1177 | set message [lindex $args 2] |
| 1178 | } else { |
| 1179 | set message $command |
| 1180 | } |
| 1181 | |
| 1182 | return [gdb_test $command $pattern $message] |
| 1183 | } |
| 1184 | |
| 1185 | # Wrapper around gdb_test_multiple that looks for a list of expected |
| 1186 | # output elements, but which can appear in any order. |
| 1187 | # CMD is the gdb command. |
| 1188 | # NAME is the name of the test. |
| 1189 | # ELM_FIND_REGEXP specifies how to partition the output into elements to |
| 1190 | # compare. |
| 1191 | # ELM_EXTRACT_REGEXP specifies the part of ELM_FIND_REGEXP to compare. |
| 1192 | # RESULT_MATCH_LIST is a list of exact matches for each expected element. |
| 1193 | # All elements of RESULT_MATCH_LIST must appear for the test to pass. |
| 1194 | # |
| 1195 | # A typical use of ELM_FIND_REGEXP/ELM_EXTRACT_REGEXP is to extract one line |
| 1196 | # of text per element and then strip trailing \r\n's. |
| 1197 | # Example: |
| 1198 | # gdb_test_list_exact "foo" "bar" \ |
| 1199 | # "\[^\r\n\]+\[\r\n\]+" \ |
| 1200 | # "\[^\r\n\]+" \ |
| 1201 | # { \ |
| 1202 | # {expected result 1} \ |
| 1203 | # {expected result 2} \ |
| 1204 | # } |
| 1205 | |
| 1206 | proc gdb_test_list_exact { cmd name elm_find_regexp elm_extract_regexp result_match_list } { |
| 1207 | global gdb_prompt |
| 1208 | |
| 1209 | set matches [lsort $result_match_list] |
| 1210 | set seen {} |
| 1211 | gdb_test_multiple $cmd $name { |
| 1212 | "$cmd\[\r\n\]" { exp_continue } |
| 1213 | -re $elm_find_regexp { |
| 1214 | set str $expect_out(0,string) |
| 1215 | verbose -log "seen: $str" 3 |
| 1216 | regexp -- $elm_extract_regexp $str elm_seen |
| 1217 | verbose -log "extracted: $elm_seen" 3 |
| 1218 | lappend seen $elm_seen |
| 1219 | exp_continue |
| 1220 | } |
| 1221 | -re "$gdb_prompt $" { |
| 1222 | set failed "" |
| 1223 | foreach got [lsort $seen] have $matches { |
| 1224 | if {![string equal $got $have]} { |
| 1225 | set failed $have |
| 1226 | break |
| 1227 | } |
| 1228 | } |
| 1229 | if {[string length $failed] != 0} { |
| 1230 | fail "$name ($failed not found)" |
| 1231 | } else { |
| 1232 | pass $name |
| 1233 | } |
| 1234 | } |
| 1235 | } |
| 1236 | } |
| 1237 | |
| 1238 | # gdb_test_stdio COMMAND INFERIOR_PATTERN GDB_PATTERN MESSAGE |
| 1239 | # Send a command to gdb; expect inferior and gdb output. |
| 1240 | # |
| 1241 | # See gdb_test_multiple for a description of the COMMAND and MESSAGE |
| 1242 | # parameters. |
| 1243 | # |
| 1244 | # INFERIOR_PATTERN is the pattern to match against inferior output. |
| 1245 | # |
| 1246 | # GDB_PATTERN is the pattern to match against gdb output, and must NOT |
| 1247 | # include the \r\n sequence immediately before the gdb prompt, nor the |
| 1248 | # prompt. The default is empty. |
| 1249 | # |
| 1250 | # Both inferior and gdb patterns must match for a PASS. |
| 1251 | # |
| 1252 | # If MESSAGE is ommitted, then COMMAND will be used as the message. |
| 1253 | # |
| 1254 | # Returns: |
| 1255 | # 1 if the test failed, |
| 1256 | # 0 if the test passes, |
| 1257 | # -1 if there was an internal error. |
| 1258 | # |
| 1259 | |
| 1260 | proc gdb_test_stdio {command inferior_pattern {gdb_pattern ""} {message ""}} { |
| 1261 | global inferior_spawn_id gdb_spawn_id |
| 1262 | global gdb_prompt |
| 1263 | |
| 1264 | if {$message == ""} { |
| 1265 | set message $command |
| 1266 | } |
| 1267 | |
| 1268 | set inferior_matched 0 |
| 1269 | set gdb_matched 0 |
| 1270 | |
| 1271 | # Use an indirect spawn id list, and remove the inferior spawn id |
| 1272 | # from the expected output as soon as it matches, in case |
| 1273 | # $inferior_pattern happens to be a prefix of the resulting full |
| 1274 | # gdb pattern below (e.g., "\r\n"). |
| 1275 | global gdb_test_stdio_spawn_id_list |
| 1276 | set gdb_test_stdio_spawn_id_list "$inferior_spawn_id" |
| 1277 | |
| 1278 | # Note that if $inferior_spawn_id and $gdb_spawn_id are different, |
| 1279 | # then we may see gdb's output arriving before the inferior's |
| 1280 | # output. |
| 1281 | set res [gdb_test_multiple $command $message { |
| 1282 | -i gdb_test_stdio_spawn_id_list -re "$inferior_pattern" { |
| 1283 | set inferior_matched 1 |
| 1284 | if {!$gdb_matched} { |
| 1285 | set gdb_test_stdio_spawn_id_list "" |
| 1286 | exp_continue |
| 1287 | } |
| 1288 | } |
| 1289 | -i $gdb_spawn_id -re "$gdb_pattern\r\n$gdb_prompt $" { |
| 1290 | set gdb_matched 1 |
| 1291 | if {!$inferior_matched} { |
| 1292 | exp_continue |
| 1293 | } |
| 1294 | } |
| 1295 | }] |
| 1296 | if {$res == 0} { |
| 1297 | pass $message |
| 1298 | } else { |
| 1299 | verbose -log "inferior_matched=$inferior_matched, gdb_matched=$gdb_matched" |
| 1300 | } |
| 1301 | return $res |
| 1302 | } |
| 1303 | |
| 1304 | \f |
| 1305 | |
| 1306 | # Issue a PASS and return true if evaluating CONDITION in the caller's |
| 1307 | # frame returns true, and issue a FAIL and return false otherwise. |
| 1308 | # MESSAGE is the pass/fail message to be printed. If MESSAGE is |
| 1309 | # omitted or is empty, then the pass/fail messages use the condition |
| 1310 | # string as the message. |
| 1311 | |
| 1312 | proc gdb_assert { condition {message ""} } { |
| 1313 | if { $message == ""} { |
| 1314 | set message $condition |
| 1315 | } |
| 1316 | |
| 1317 | set res [uplevel 1 expr $condition] |
| 1318 | if {!$res} { |
| 1319 | fail $message |
| 1320 | } else { |
| 1321 | pass $message |
| 1322 | } |
| 1323 | return $res |
| 1324 | } |
| 1325 | |
| 1326 | proc gdb_reinitialize_dir { subdir } { |
| 1327 | global gdb_prompt |
| 1328 | |
| 1329 | if [is_remote host] { |
| 1330 | return "" |
| 1331 | } |
| 1332 | send_gdb "dir\n" |
| 1333 | gdb_expect 60 { |
| 1334 | -re "Reinitialize source path to empty.*y or n. " { |
| 1335 | send_gdb "y\n" |
| 1336 | gdb_expect 60 { |
| 1337 | -re "Source directories searched.*$gdb_prompt $" { |
| 1338 | send_gdb "dir $subdir\n" |
| 1339 | gdb_expect 60 { |
| 1340 | -re "Source directories searched.*$gdb_prompt $" { |
| 1341 | verbose "Dir set to $subdir" |
| 1342 | } |
| 1343 | -re "$gdb_prompt $" { |
| 1344 | perror "Dir \"$subdir\" failed." |
| 1345 | } |
| 1346 | } |
| 1347 | } |
| 1348 | -re "$gdb_prompt $" { |
| 1349 | perror "Dir \"$subdir\" failed." |
| 1350 | } |
| 1351 | } |
| 1352 | } |
| 1353 | -re "$gdb_prompt $" { |
| 1354 | perror "Dir \"$subdir\" failed." |
| 1355 | } |
| 1356 | } |
| 1357 | } |
| 1358 | |
| 1359 | # |
| 1360 | # gdb_exit -- exit the GDB, killing the target program if necessary |
| 1361 | # |
| 1362 | proc default_gdb_exit {} { |
| 1363 | global GDB |
| 1364 | global INTERNAL_GDBFLAGS GDBFLAGS |
| 1365 | global verbose |
| 1366 | global gdb_spawn_id inferior_spawn_id |
| 1367 | global inotify_log_file |
| 1368 | |
| 1369 | gdb_stop_suppressing_tests |
| 1370 | |
| 1371 | if ![info exists gdb_spawn_id] { |
| 1372 | return |
| 1373 | } |
| 1374 | |
| 1375 | verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
| 1376 | |
| 1377 | if {[info exists inotify_log_file] && [file exists $inotify_log_file]} { |
| 1378 | set fd [open $inotify_log_file] |
| 1379 | set data [read -nonewline $fd] |
| 1380 | close $fd |
| 1381 | |
| 1382 | if {[string compare $data ""] != 0} { |
| 1383 | warning "parallel-unsafe file creations noticed" |
| 1384 | |
| 1385 | # Clear the log. |
| 1386 | set fd [open $inotify_log_file w] |
| 1387 | close $fd |
| 1388 | } |
| 1389 | } |
| 1390 | |
| 1391 | if { [is_remote host] && [board_info host exists fileid] } { |
| 1392 | send_gdb "quit\n" |
| 1393 | gdb_expect 10 { |
| 1394 | -re "y or n" { |
| 1395 | send_gdb "y\n" |
| 1396 | exp_continue |
| 1397 | } |
| 1398 | -re "DOSEXIT code" { } |
| 1399 | default { } |
| 1400 | } |
| 1401 | } |
| 1402 | |
| 1403 | if ![is_remote host] { |
| 1404 | remote_close host |
| 1405 | } |
| 1406 | unset gdb_spawn_id |
| 1407 | unset inferior_spawn_id |
| 1408 | } |
| 1409 | |
| 1410 | # Load a file into the debugger. |
| 1411 | # The return value is 0 for success, -1 for failure. |
| 1412 | # |
| 1413 | # This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO |
| 1414 | # to one of these values: |
| 1415 | # |
| 1416 | # debug file was loaded successfully and has debug information |
| 1417 | # nodebug file was loaded successfully and has no debug information |
| 1418 | # lzma file was loaded, .gnu_debugdata found, but no LZMA support |
| 1419 | # compiled in |
| 1420 | # fail file was not loaded |
| 1421 | # |
| 1422 | # I tried returning this information as part of the return value, |
| 1423 | # but ran into a mess because of the many re-implementations of |
| 1424 | # gdb_load in config/*.exp. |
| 1425 | # |
| 1426 | # TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use |
| 1427 | # this if they can get more information set. |
| 1428 | |
| 1429 | proc gdb_file_cmd { arg } { |
| 1430 | global gdb_prompt |
| 1431 | global verbose |
| 1432 | global GDB |
| 1433 | global last_loaded_file |
| 1434 | |
| 1435 | # Save this for the benefit of gdbserver-support.exp. |
| 1436 | set last_loaded_file $arg |
| 1437 | |
| 1438 | # Set whether debug info was found. |
| 1439 | # Default to "fail". |
| 1440 | global gdb_file_cmd_debug_info |
| 1441 | set gdb_file_cmd_debug_info "fail" |
| 1442 | |
| 1443 | if [is_remote host] { |
| 1444 | set arg [remote_download host $arg] |
| 1445 | if { $arg == "" } { |
| 1446 | perror "download failed" |
| 1447 | return -1 |
| 1448 | } |
| 1449 | } |
| 1450 | |
| 1451 | # The file command used to kill the remote target. For the benefit |
| 1452 | # of the testsuite, preserve this behavior. |
| 1453 | send_gdb "kill\n" |
| 1454 | gdb_expect 120 { |
| 1455 | -re "Kill the program being debugged. .y or n. $" { |
| 1456 | send_gdb "y\n" |
| 1457 | verbose "\t\tKilling previous program being debugged" |
| 1458 | exp_continue |
| 1459 | } |
| 1460 | -re "$gdb_prompt $" { |
| 1461 | # OK. |
| 1462 | } |
| 1463 | } |
| 1464 | |
| 1465 | send_gdb "file $arg\n" |
| 1466 | gdb_expect 120 { |
| 1467 | -re "Reading symbols from.*LZMA support was disabled.*done.*$gdb_prompt $" { |
| 1468 | verbose "\t\tLoaded $arg into $GDB; .gnu_debugdata found but no LZMA available" |
| 1469 | set gdb_file_cmd_debug_info "lzma" |
| 1470 | return 0 |
| 1471 | } |
| 1472 | -re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" { |
| 1473 | verbose "\t\tLoaded $arg into $GDB with no debugging symbols" |
| 1474 | set gdb_file_cmd_debug_info "nodebug" |
| 1475 | return 0 |
| 1476 | } |
| 1477 | -re "Reading symbols from.*done.*$gdb_prompt $" { |
| 1478 | verbose "\t\tLoaded $arg into $GDB" |
| 1479 | set gdb_file_cmd_debug_info "debug" |
| 1480 | return 0 |
| 1481 | } |
| 1482 | -re "Load new symbol table from \".*\".*y or n. $" { |
| 1483 | send_gdb "y\n" |
| 1484 | gdb_expect 120 { |
| 1485 | -re "Reading symbols from.*done.*$gdb_prompt $" { |
| 1486 | verbose "\t\tLoaded $arg with new symbol table into $GDB" |
| 1487 | set gdb_file_cmd_debug_info "debug" |
| 1488 | return 0 |
| 1489 | } |
| 1490 | timeout { |
| 1491 | perror "Couldn't load $arg, other program already loaded (timeout)." |
| 1492 | return -1 |
| 1493 | } |
| 1494 | eof { |
| 1495 | perror "Couldn't load $arg, other program already loaded (eof)." |
| 1496 | return -1 |
| 1497 | } |
| 1498 | } |
| 1499 | } |
| 1500 | -re "No such file or directory.*$gdb_prompt $" { |
| 1501 | perror "($arg) No such file or directory" |
| 1502 | return -1 |
| 1503 | } |
| 1504 | -re "A problem internal to GDB has been detected" { |
| 1505 | fail "($arg) (GDB internal error)" |
| 1506 | gdb_internal_error_resync |
| 1507 | return -1 |
| 1508 | } |
| 1509 | -re "$gdb_prompt $" { |
| 1510 | perror "Couldn't load $arg into $GDB." |
| 1511 | return -1 |
| 1512 | } |
| 1513 | timeout { |
| 1514 | perror "Couldn't load $arg into $GDB (timeout)." |
| 1515 | return -1 |
| 1516 | } |
| 1517 | eof { |
| 1518 | # This is an attempt to detect a core dump, but seems not to |
| 1519 | # work. Perhaps we need to match .* followed by eof, in which |
| 1520 | # gdb_expect does not seem to have a way to do that. |
| 1521 | perror "Couldn't load $arg into $GDB (eof)." |
| 1522 | return -1 |
| 1523 | } |
| 1524 | } |
| 1525 | } |
| 1526 | |
| 1527 | # Default gdb_spawn procedure. |
| 1528 | |
| 1529 | proc default_gdb_spawn { } { |
| 1530 | global use_gdb_stub |
| 1531 | global GDB |
| 1532 | global INTERNAL_GDBFLAGS GDBFLAGS |
| 1533 | global gdb_spawn_id |
| 1534 | |
| 1535 | gdb_stop_suppressing_tests |
| 1536 | |
| 1537 | # Set the default value, it may be overriden later by specific testfile. |
| 1538 | # |
| 1539 | # Use `set_board_info use_gdb_stub' for the board file to flag the inferior |
| 1540 | # is already started after connecting and run/attach are not supported. |
| 1541 | # This is used for the "remote" protocol. After GDB starts you should |
| 1542 | # check global $use_gdb_stub instead of the board as the testfile may force |
| 1543 | # a specific different target protocol itself. |
| 1544 | set use_gdb_stub [target_info exists use_gdb_stub] |
| 1545 | |
| 1546 | verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS" |
| 1547 | |
| 1548 | if [info exists gdb_spawn_id] { |
| 1549 | return 0 |
| 1550 | } |
| 1551 | |
| 1552 | if ![is_remote host] { |
| 1553 | if { [which $GDB] == 0 } then { |
| 1554 | perror "$GDB does not exist." |
| 1555 | exit 1 |
| 1556 | } |
| 1557 | } |
| 1558 | set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"] |
| 1559 | if { $res < 0 || $res == "" } { |
| 1560 | perror "Spawning $GDB failed." |
| 1561 | return 1 |
| 1562 | } |
| 1563 | |
| 1564 | set gdb_spawn_id $res |
| 1565 | return 0 |
| 1566 | } |
| 1567 | |
| 1568 | # Default gdb_start procedure. |
| 1569 | |
| 1570 | proc default_gdb_start { } { |
| 1571 | global gdb_prompt pagination_prompt |
| 1572 | global gdb_spawn_id |
| 1573 | global inferior_spawn_id |
| 1574 | |
| 1575 | if [info exists gdb_spawn_id] { |
| 1576 | return 0 |
| 1577 | } |
| 1578 | |
| 1579 | set res [gdb_spawn] |
| 1580 | if { $res != 0} { |
| 1581 | return $res |
| 1582 | } |
| 1583 | |
| 1584 | # Default to assuming inferior I/O is done on GDB's terminal. |
| 1585 | if {![info exists inferior_spawn_id]} { |
| 1586 | set inferior_spawn_id $gdb_spawn_id |
| 1587 | } |
| 1588 | |
| 1589 | # When running over NFS, particularly if running many simultaneous |
| 1590 | # tests on different hosts all using the same server, things can |
| 1591 | # get really slow. Give gdb at least 3 minutes to start up. |
| 1592 | set loop_again 1 |
| 1593 | while { $loop_again } { |
| 1594 | set loop_again 0 |
| 1595 | gdb_expect 360 { |
| 1596 | -re "$pagination_prompt" { |
| 1597 | verbose "Hit pagination during startup. Pressing enter to continue." |
| 1598 | send_gdb "\n" |
| 1599 | set loop_again 1 |
| 1600 | } |
| 1601 | -re "\[\r\n\]$gdb_prompt $" { |
| 1602 | verbose "GDB initialized." |
| 1603 | } |
| 1604 | -re "$gdb_prompt $" { |
| 1605 | perror "GDB never initialized." |
| 1606 | unset gdb_spawn_id |
| 1607 | return -1 |
| 1608 | } |
| 1609 | timeout { |
| 1610 | perror "(timeout) GDB never initialized after 10 seconds." |
| 1611 | remote_close host |
| 1612 | unset gdb_spawn_id |
| 1613 | return -1 |
| 1614 | } |
| 1615 | } |
| 1616 | } |
| 1617 | |
| 1618 | # force the height to "unlimited", so no pagers get used |
| 1619 | |
| 1620 | send_gdb "set height 0\n" |
| 1621 | gdb_expect 10 { |
| 1622 | -re "$gdb_prompt $" { |
| 1623 | verbose "Setting height to 0." 2 |
| 1624 | } |
| 1625 | timeout { |
| 1626 | warning "Couldn't set the height to 0" |
| 1627 | } |
| 1628 | } |
| 1629 | # force the width to "unlimited", so no wraparound occurs |
| 1630 | send_gdb "set width 0\n" |
| 1631 | gdb_expect 10 { |
| 1632 | -re "$gdb_prompt $" { |
| 1633 | verbose "Setting width to 0." 2 |
| 1634 | } |
| 1635 | timeout { |
| 1636 | warning "Couldn't set the width to 0." |
| 1637 | } |
| 1638 | } |
| 1639 | return 0 |
| 1640 | } |
| 1641 | |
| 1642 | # Utility procedure to give user control of the gdb prompt in a script. It is |
| 1643 | # meant to be used for debugging test cases, and should not be left in the |
| 1644 | # test cases code. |
| 1645 | |
| 1646 | proc gdb_interact { } { |
| 1647 | global gdb_spawn_id |
| 1648 | set spawn_id $gdb_spawn_id |
| 1649 | |
| 1650 | send_user "+------------------------------------------+\n" |
| 1651 | send_user "| Script interrupted, you can now interact |\n" |
| 1652 | send_user "| with by gdb. Type >>> to continue. |\n" |
| 1653 | send_user "+------------------------------------------+\n" |
| 1654 | |
| 1655 | interact { |
| 1656 | ">>>" return |
| 1657 | } |
| 1658 | } |
| 1659 | |
| 1660 | # Examine the output of compilation to determine whether compilation |
| 1661 | # failed or not. If it failed determine whether it is due to missing |
| 1662 | # compiler or due to compiler error. Report pass, fail or unsupported |
| 1663 | # as appropriate |
| 1664 | |
| 1665 | proc gdb_compile_test {src output} { |
| 1666 | if { $output == "" } { |
| 1667 | pass "compilation [file tail $src]" |
| 1668 | } elseif { [regexp {^[a-zA-Z_0-9]+: Can't find [^ ]+\.$} $output] } { |
| 1669 | unsupported "compilation [file tail $src]" |
| 1670 | } elseif { [regexp {.*: command not found[\r|\n]*$} $output] } { |
| 1671 | unsupported "compilation [file tail $src]" |
| 1672 | } elseif { [regexp {.*: [^\r\n]*compiler not installed[^\r\n]*[\r|\n]*$} $output] } { |
| 1673 | unsupported "compilation [file tail $src]" |
| 1674 | } else { |
| 1675 | verbose -log "compilation failed: $output" 2 |
| 1676 | fail "compilation [file tail $src]" |
| 1677 | } |
| 1678 | } |
| 1679 | |
| 1680 | # Return a 1 for configurations for which we don't even want to try to |
| 1681 | # test C++. |
| 1682 | |
| 1683 | proc skip_cplus_tests {} { |
| 1684 | if { [istarget "h8300-*-*"] } { |
| 1685 | return 1 |
| 1686 | } |
| 1687 | |
| 1688 | # The C++ IO streams are too large for HC11/HC12 and are thus not |
| 1689 | # available. The gdb C++ tests use them and don't compile. |
| 1690 | if { [istarget "m6811-*-*"] } { |
| 1691 | return 1 |
| 1692 | } |
| 1693 | if { [istarget "m6812-*-*"] } { |
| 1694 | return 1 |
| 1695 | } |
| 1696 | return 0 |
| 1697 | } |
| 1698 | |
| 1699 | # Return a 1 for configurations for which don't have both C++ and the STL. |
| 1700 | |
| 1701 | proc skip_stl_tests {} { |
| 1702 | # Symbian supports the C++ language, but the STL is missing |
| 1703 | # (both headers and libraries). |
| 1704 | if { [istarget "arm*-*-symbianelf*"] } { |
| 1705 | return 1 |
| 1706 | } |
| 1707 | |
| 1708 | return [skip_cplus_tests] |
| 1709 | } |
| 1710 | |
| 1711 | # Return a 1 if I don't even want to try to test FORTRAN. |
| 1712 | |
| 1713 | proc skip_fortran_tests {} { |
| 1714 | return 0 |
| 1715 | } |
| 1716 | |
| 1717 | # Return a 1 if I don't even want to try to test ada. |
| 1718 | |
| 1719 | proc skip_ada_tests {} { |
| 1720 | return 0 |
| 1721 | } |
| 1722 | |
| 1723 | # Return a 1 if I don't even want to try to test GO. |
| 1724 | |
| 1725 | proc skip_go_tests {} { |
| 1726 | return 0 |
| 1727 | } |
| 1728 | |
| 1729 | # Return a 1 if I don't even want to try to test D. |
| 1730 | |
| 1731 | proc skip_d_tests {} { |
| 1732 | return 0 |
| 1733 | } |
| 1734 | |
| 1735 | # Return 1 to skip Rust tests, 0 to try them. |
| 1736 | proc skip_rust_tests {} { |
| 1737 | return [expr {![isnative]}] |
| 1738 | } |
| 1739 | |
| 1740 | # Return a 1 for configurations that do not support Python scripting. |
| 1741 | # PROMPT_REGEXP is the expected prompt. |
| 1742 | |
| 1743 | proc skip_python_tests_prompt { prompt_regexp } { |
| 1744 | global gdb_py_is_py3k |
| 1745 | global gdb_py_is_py24 |
| 1746 | |
| 1747 | gdb_test_multiple "python print ('test')" "verify python support" { |
| 1748 | -re "not supported.*$prompt_regexp" { |
| 1749 | unsupported "Python support is disabled." |
| 1750 | return 1 |
| 1751 | } |
| 1752 | -re "$prompt_regexp" {} |
| 1753 | } |
| 1754 | |
| 1755 | set gdb_py_is_py24 0 |
| 1756 | gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" { |
| 1757 | -re "3.*$prompt_regexp" { |
| 1758 | set gdb_py_is_py3k 1 |
| 1759 | } |
| 1760 | -re ".*$prompt_regexp" { |
| 1761 | set gdb_py_is_py3k 0 |
| 1762 | } |
| 1763 | } |
| 1764 | if { $gdb_py_is_py3k == 0 } { |
| 1765 | gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" { |
| 1766 | -re "\[45\].*$prompt_regexp" { |
| 1767 | set gdb_py_is_py24 1 |
| 1768 | } |
| 1769 | -re ".*$prompt_regexp" { |
| 1770 | set gdb_py_is_py24 0 |
| 1771 | } |
| 1772 | } |
| 1773 | } |
| 1774 | |
| 1775 | return 0 |
| 1776 | } |
| 1777 | |
| 1778 | # Return a 1 for configurations that do not support Python scripting. |
| 1779 | # Note: This also sets various globals that specify which version of Python |
| 1780 | # is in use. See skip_python_tests_prompt. |
| 1781 | |
| 1782 | proc skip_python_tests {} { |
| 1783 | global gdb_prompt |
| 1784 | return [skip_python_tests_prompt "$gdb_prompt $"] |
| 1785 | } |
| 1786 | |
| 1787 | # Return a 1 if we should skip shared library tests. |
| 1788 | |
| 1789 | proc skip_shlib_tests {} { |
| 1790 | # Run the shared library tests on native systems. |
| 1791 | if {[isnative]} { |
| 1792 | return 0 |
| 1793 | } |
| 1794 | |
| 1795 | # An abbreviated list of remote targets where we should be able to |
| 1796 | # run shared library tests. |
| 1797 | if {([istarget *-*-linux*] |
| 1798 | || [istarget *-*-*bsd*] |
| 1799 | || [istarget *-*-solaris2*] |
| 1800 | || [istarget arm*-*-symbianelf*] |
| 1801 | || [istarget *-*-mingw*] |
| 1802 | || [istarget *-*-cygwin*] |
| 1803 | || [istarget *-*-pe*])} { |
| 1804 | return 0 |
| 1805 | } |
| 1806 | |
| 1807 | return 1 |
| 1808 | } |
| 1809 | |
| 1810 | # Return 1 if we should skip tui related tests. |
| 1811 | |
| 1812 | proc skip_tui_tests {} { |
| 1813 | global gdb_prompt |
| 1814 | |
| 1815 | gdb_test_multiple "help layout" "verify tui support" { |
| 1816 | -re "Undefined command: \"layout\".*$gdb_prompt $" { |
| 1817 | return 1 |
| 1818 | } |
| 1819 | -re "$gdb_prompt $" { |
| 1820 | } |
| 1821 | } |
| 1822 | |
| 1823 | return 0 |
| 1824 | } |
| 1825 | |
| 1826 | # Test files shall make sure all the test result lines in gdb.sum are |
| 1827 | # unique in a test run, so that comparing the gdb.sum files of two |
| 1828 | # test runs gives correct results. Test files that exercise |
| 1829 | # variations of the same tests more than once, shall prefix the |
| 1830 | # different test invocations with different identifying strings in |
| 1831 | # order to make them unique. |
| 1832 | # |
| 1833 | # About test prefixes: |
| 1834 | # |
| 1835 | # $pf_prefix is the string that dejagnu prints after the result (FAIL, |
| 1836 | # PASS, etc.), and before the test message/name in gdb.sum. E.g., the |
| 1837 | # underlined substring in |
| 1838 | # |
| 1839 | # PASS: gdb.base/mytest.exp: some test |
| 1840 | # ^^^^^^^^^^^^^^^^^^^^ |
| 1841 | # |
| 1842 | # is $pf_prefix. |
| 1843 | # |
| 1844 | # The easiest way to adjust the test prefix is to append a test |
| 1845 | # variation prefix to the $pf_prefix, using the with_test_prefix |
| 1846 | # procedure. E.g., |
| 1847 | # |
| 1848 | # proc do_tests {} { |
| 1849 | # gdb_test ... ... "test foo" |
| 1850 | # gdb_test ... ... "test bar" |
| 1851 | # |
| 1852 | # with_test_prefix "subvariation a" { |
| 1853 | # gdb_test ... ... "test x" |
| 1854 | # } |
| 1855 | # |
| 1856 | # with_test_prefix "subvariation b" { |
| 1857 | # gdb_test ... ... "test x" |
| 1858 | # } |
| 1859 | # } |
| 1860 | # |
| 1861 | # with_test_prefix "variation1" { |
| 1862 | # ...do setup for variation 1... |
| 1863 | # do_tests |
| 1864 | # } |
| 1865 | # |
| 1866 | # with_test_prefix "variation2" { |
| 1867 | # ...do setup for variation 2... |
| 1868 | # do_tests |
| 1869 | # } |
| 1870 | # |
| 1871 | # Results in: |
| 1872 | # |
| 1873 | # PASS: gdb.base/mytest.exp: variation1: test foo |
| 1874 | # PASS: gdb.base/mytest.exp: variation1: test bar |
| 1875 | # PASS: gdb.base/mytest.exp: variation1: subvariation a: test x |
| 1876 | # PASS: gdb.base/mytest.exp: variation1: subvariation b: test x |
| 1877 | # PASS: gdb.base/mytest.exp: variation2: test foo |
| 1878 | # PASS: gdb.base/mytest.exp: variation2: test bar |
| 1879 | # PASS: gdb.base/mytest.exp: variation2: subvariation a: test x |
| 1880 | # PASS: gdb.base/mytest.exp: variation2: subvariation b: test x |
| 1881 | # |
| 1882 | # If for some reason more flexibility is necessary, one can also |
| 1883 | # manipulate the pf_prefix global directly, treating it as a string. |
| 1884 | # E.g., |
| 1885 | # |
| 1886 | # global pf_prefix |
| 1887 | # set saved_pf_prefix |
| 1888 | # append pf_prefix "${foo}: bar" |
| 1889 | # ... actual tests ... |
| 1890 | # set pf_prefix $saved_pf_prefix |
| 1891 | # |
| 1892 | |
| 1893 | # Run BODY in the context of the caller, with the current test prefix |
| 1894 | # (pf_prefix) appended with one space, then PREFIX, and then a colon. |
| 1895 | # Returns the result of BODY. |
| 1896 | # |
| 1897 | proc with_test_prefix { prefix body } { |
| 1898 | global pf_prefix |
| 1899 | |
| 1900 | set saved $pf_prefix |
| 1901 | append pf_prefix " " $prefix ":" |
| 1902 | set code [catch {uplevel 1 $body} result] |
| 1903 | set pf_prefix $saved |
| 1904 | |
| 1905 | if {$code == 1} { |
| 1906 | global errorInfo errorCode |
| 1907 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 1908 | } else { |
| 1909 | return -code $code $result |
| 1910 | } |
| 1911 | } |
| 1912 | |
| 1913 | # Wrapper for foreach that calls with_test_prefix on each iteration, |
| 1914 | # including the iterator's name and current value in the prefix. |
| 1915 | |
| 1916 | proc foreach_with_prefix {var list body} { |
| 1917 | upvar 1 $var myvar |
| 1918 | foreach myvar $list { |
| 1919 | with_test_prefix "$var=$myvar" { |
| 1920 | uplevel 1 $body |
| 1921 | } |
| 1922 | } |
| 1923 | } |
| 1924 | |
| 1925 | # Like TCL's native proc, but defines a procedure that wraps its body |
| 1926 | # within 'with_test_prefix "$proc_name" { ... }'. |
| 1927 | proc proc_with_prefix {name arguments body} { |
| 1928 | # Define the advertised proc. |
| 1929 | proc $name $arguments [list with_test_prefix $name $body] |
| 1930 | } |
| 1931 | |
| 1932 | |
| 1933 | # Run BODY in the context of the caller. After BODY is run, the variables |
| 1934 | # listed in VARS will be reset to the values they had before BODY was run. |
| 1935 | # |
| 1936 | # This is useful for providing a scope in which it is safe to temporarily |
| 1937 | # modify global variables, e.g. |
| 1938 | # |
| 1939 | # global INTERNAL_GDBFLAGS |
| 1940 | # global env |
| 1941 | # |
| 1942 | # set foo GDBHISTSIZE |
| 1943 | # |
| 1944 | # save_vars { INTERNAL_GDBFLAGS env($foo) env(HOME) } { |
| 1945 | # append INTERNAL_GDBFLAGS " -nx" |
| 1946 | # unset -nocomplain env(GDBHISTSIZE) |
| 1947 | # gdb_start |
| 1948 | # gdb_test ... |
| 1949 | # } |
| 1950 | # |
| 1951 | # Here, although INTERNAL_GDBFLAGS, env(GDBHISTSIZE) and env(HOME) may be |
| 1952 | # modified inside BODY, this proc guarantees that the modifications will be |
| 1953 | # undone after BODY finishes executing. |
| 1954 | |
| 1955 | proc save_vars { vars body } { |
| 1956 | array set saved_scalars { } |
| 1957 | array set saved_arrays { } |
| 1958 | set unset_vars { } |
| 1959 | |
| 1960 | foreach var $vars { |
| 1961 | # First evaluate VAR in the context of the caller in case the variable |
| 1962 | # name may be a not-yet-interpolated string like env($foo) |
| 1963 | set var [uplevel 1 list $var] |
| 1964 | |
| 1965 | if [uplevel 1 [list info exists $var]] { |
| 1966 | if [uplevel 1 [list array exists $var]] { |
| 1967 | set saved_arrays($var) [uplevel 1 [list array get $var]] |
| 1968 | } else { |
| 1969 | set saved_scalars($var) [uplevel 1 [list set $var]] |
| 1970 | } |
| 1971 | } else { |
| 1972 | lappend unset_vars $var |
| 1973 | } |
| 1974 | } |
| 1975 | |
| 1976 | set code [catch {uplevel 1 $body} result] |
| 1977 | |
| 1978 | foreach {var value} [array get saved_scalars] { |
| 1979 | uplevel 1 [list set $var $value] |
| 1980 | } |
| 1981 | |
| 1982 | foreach {var value} [array get saved_arrays] { |
| 1983 | uplevel 1 [list unset $var] |
| 1984 | uplevel 1 [list array set $var $value] |
| 1985 | } |
| 1986 | |
| 1987 | foreach var $unset_vars { |
| 1988 | uplevel 1 [list unset -nocomplain $var] |
| 1989 | } |
| 1990 | |
| 1991 | if {$code == 1} { |
| 1992 | global errorInfo errorCode |
| 1993 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 1994 | } else { |
| 1995 | return -code $code $result |
| 1996 | } |
| 1997 | } |
| 1998 | |
| 1999 | |
| 2000 | # Run tests in BODY with GDB prompt and variable $gdb_prompt set to |
| 2001 | # PROMPT. When BODY is finished, restore GDB prompt and variable |
| 2002 | # $gdb_prompt. |
| 2003 | # Returns the result of BODY. |
| 2004 | # |
| 2005 | # Notes: |
| 2006 | # |
| 2007 | # 1) If you want to use, for example, "(foo)" as the prompt you must pass it |
| 2008 | # as "(foo)", and not the regexp form "\(foo\)" (expressed as "\\(foo\\)" in |
| 2009 | # TCL). PROMPT is internally converted to a suitable regexp for matching. |
| 2010 | # We do the conversion from "(foo)" to "\(foo\)" here for a few reasons: |
| 2011 | # a) It's more intuitive for callers to pass the plain text form. |
| 2012 | # b) We need two forms of the prompt: |
| 2013 | # - a regexp to use in output matching, |
| 2014 | # - a value to pass to the "set prompt" command. |
| 2015 | # c) It's easier to convert the plain text form to its regexp form. |
| 2016 | # |
| 2017 | # 2) Don't add a trailing space, we do that here. |
| 2018 | |
| 2019 | proc with_gdb_prompt { prompt body } { |
| 2020 | global gdb_prompt |
| 2021 | |
| 2022 | # Convert "(foo)" to "\(foo\)". |
| 2023 | # We don't use string_to_regexp because while it works today it's not |
| 2024 | # clear it will work tomorrow: the value we need must work as both a |
| 2025 | # regexp *and* as the argument to the "set prompt" command, at least until |
| 2026 | # we start recording both forms separately instead of just $gdb_prompt. |
| 2027 | # The testsuite is pretty-much hardwired to interpret $gdb_prompt as the |
| 2028 | # regexp form. |
| 2029 | regsub -all {[]*+.|()^$\[\\]} $prompt {\\&} prompt |
| 2030 | |
| 2031 | set saved $gdb_prompt |
| 2032 | |
| 2033 | verbose -log "Setting gdb prompt to \"$prompt \"." |
| 2034 | set gdb_prompt $prompt |
| 2035 | gdb_test_no_output "set prompt $prompt " "" |
| 2036 | |
| 2037 | set code [catch {uplevel 1 $body} result] |
| 2038 | |
| 2039 | verbose -log "Restoring gdb prompt to \"$saved \"." |
| 2040 | set gdb_prompt $saved |
| 2041 | gdb_test_no_output "set prompt $saved " "" |
| 2042 | |
| 2043 | if {$code == 1} { |
| 2044 | global errorInfo errorCode |
| 2045 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 2046 | } else { |
| 2047 | return -code $code $result |
| 2048 | } |
| 2049 | } |
| 2050 | |
| 2051 | # Run tests in BODY with target-charset setting to TARGET_CHARSET. When |
| 2052 | # BODY is finished, restore target-charset. |
| 2053 | |
| 2054 | proc with_target_charset { target_charset body } { |
| 2055 | global gdb_prompt |
| 2056 | |
| 2057 | set saved "" |
| 2058 | gdb_test_multiple "show target-charset" "" { |
| 2059 | -re "The target character set is \".*; currently (.*)\"\..*$gdb_prompt " { |
| 2060 | set saved $expect_out(1,string) |
| 2061 | } |
| 2062 | -re "The target character set is \"(.*)\".*$gdb_prompt " { |
| 2063 | set saved $expect_out(1,string) |
| 2064 | } |
| 2065 | -re ".*$gdb_prompt " { |
| 2066 | fail "get target-charset" |
| 2067 | } |
| 2068 | } |
| 2069 | |
| 2070 | gdb_test_no_output "set target-charset $target_charset" "" |
| 2071 | |
| 2072 | set code [catch {uplevel 1 $body} result] |
| 2073 | |
| 2074 | gdb_test_no_output "set target-charset $saved" "" |
| 2075 | |
| 2076 | if {$code == 1} { |
| 2077 | global errorInfo errorCode |
| 2078 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 2079 | } else { |
| 2080 | return -code $code $result |
| 2081 | } |
| 2082 | } |
| 2083 | |
| 2084 | # Switch the default spawn id to SPAWN_ID, so that gdb_test, |
| 2085 | # mi_gdb_test etc. default to using it. |
| 2086 | |
| 2087 | proc switch_gdb_spawn_id {spawn_id} { |
| 2088 | global gdb_spawn_id |
| 2089 | global board board_info |
| 2090 | |
| 2091 | set gdb_spawn_id $spawn_id |
| 2092 | set board [host_info name] |
| 2093 | set board_info($board,fileid) $spawn_id |
| 2094 | } |
| 2095 | |
| 2096 | # Clear the default spawn id. |
| 2097 | |
| 2098 | proc clear_gdb_spawn_id {} { |
| 2099 | global gdb_spawn_id |
| 2100 | global board board_info |
| 2101 | |
| 2102 | unset -nocomplain gdb_spawn_id |
| 2103 | set board [host_info name] |
| 2104 | unset -nocomplain board_info($board,fileid) |
| 2105 | } |
| 2106 | |
| 2107 | # Run BODY with SPAWN_ID as current spawn id. |
| 2108 | |
| 2109 | proc with_spawn_id { spawn_id body } { |
| 2110 | global gdb_spawn_id |
| 2111 | |
| 2112 | if [info exists gdb_spawn_id] { |
| 2113 | set saved_spawn_id $gdb_spawn_id |
| 2114 | } |
| 2115 | |
| 2116 | switch_gdb_spawn_id $spawn_id |
| 2117 | |
| 2118 | set code [catch {uplevel 1 $body} result] |
| 2119 | |
| 2120 | if [info exists saved_spawn_id] { |
| 2121 | switch_gdb_spawn_id $saved_spawn_id |
| 2122 | } else { |
| 2123 | clear_gdb_spawn_id |
| 2124 | } |
| 2125 | |
| 2126 | if {$code == 1} { |
| 2127 | global errorInfo errorCode |
| 2128 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 2129 | } else { |
| 2130 | return -code $code $result |
| 2131 | } |
| 2132 | } |
| 2133 | |
| 2134 | # Select the largest timeout from all the timeouts: |
| 2135 | # - the local "timeout" variable of the scope two levels above, |
| 2136 | # - the global "timeout" variable, |
| 2137 | # - the board variable "gdb,timeout". |
| 2138 | |
| 2139 | proc get_largest_timeout {} { |
| 2140 | upvar #0 timeout gtimeout |
| 2141 | upvar 2 timeout timeout |
| 2142 | |
| 2143 | set tmt 0 |
| 2144 | if [info exists timeout] { |
| 2145 | set tmt $timeout |
| 2146 | } |
| 2147 | if { [info exists gtimeout] && $gtimeout > $tmt } { |
| 2148 | set tmt $gtimeout |
| 2149 | } |
| 2150 | if { [target_info exists gdb,timeout] |
| 2151 | && [target_info gdb,timeout] > $tmt } { |
| 2152 | set tmt [target_info gdb,timeout] |
| 2153 | } |
| 2154 | if { $tmt == 0 } { |
| 2155 | # Eeeeew. |
| 2156 | set tmt 60 |
| 2157 | } |
| 2158 | |
| 2159 | return $tmt |
| 2160 | } |
| 2161 | |
| 2162 | # Run tests in BODY with timeout increased by factor of FACTOR. When |
| 2163 | # BODY is finished, restore timeout. |
| 2164 | |
| 2165 | proc with_timeout_factor { factor body } { |
| 2166 | global timeout |
| 2167 | |
| 2168 | set savedtimeout $timeout |
| 2169 | |
| 2170 | set timeout [expr [get_largest_timeout] * $factor] |
| 2171 | set code [catch {uplevel 1 $body} result] |
| 2172 | |
| 2173 | set timeout $savedtimeout |
| 2174 | if {$code == 1} { |
| 2175 | global errorInfo errorCode |
| 2176 | return -code $code -errorinfo $errorInfo -errorcode $errorCode $result |
| 2177 | } else { |
| 2178 | return -code $code $result |
| 2179 | } |
| 2180 | } |
| 2181 | |
| 2182 | # Return 1 if _Complex types are supported, otherwise, return 0. |
| 2183 | |
| 2184 | gdb_caching_proc support_complex_tests { |
| 2185 | |
| 2186 | if { [gdb_skip_float_test] } { |
| 2187 | # If floating point is not supported, _Complex is not |
| 2188 | # supported. |
| 2189 | return 0 |
| 2190 | } |
| 2191 | |
| 2192 | # Set up, compile, and execute a test program containing _Complex types. |
| 2193 | # Include the current process ID in the file names to prevent conflicts |
| 2194 | # with invocations for multiple testsuites. |
| 2195 | set src [standard_temp_file complex[pid].c] |
| 2196 | set exe [standard_temp_file complex[pid].x] |
| 2197 | |
| 2198 | gdb_produce_source $src { |
| 2199 | int main() { |
| 2200 | _Complex float cf; |
| 2201 | _Complex double cd; |
| 2202 | _Complex long double cld; |
| 2203 | return 0; |
| 2204 | } |
| 2205 | } |
| 2206 | |
| 2207 | verbose "compiling testfile $src" 2 |
| 2208 | set compile_flags {debug nowarnings quiet} |
| 2209 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 2210 | file delete $src |
| 2211 | file delete $exe |
| 2212 | |
| 2213 | if ![string match "" $lines] then { |
| 2214 | verbose "testfile compilation failed, returning 0" 2 |
| 2215 | set result 0 |
| 2216 | } else { |
| 2217 | set result 1 |
| 2218 | } |
| 2219 | |
| 2220 | return $result |
| 2221 | } |
| 2222 | |
| 2223 | # Return 1 if GDB can get a type for siginfo from the target, otherwise |
| 2224 | # return 0. |
| 2225 | |
| 2226 | proc supports_get_siginfo_type {} { |
| 2227 | if { [istarget "*-*-linux*"] } { |
| 2228 | return 1 |
| 2229 | } else { |
| 2230 | return 0 |
| 2231 | } |
| 2232 | } |
| 2233 | |
| 2234 | # Return 1 if the target supports hardware single stepping. |
| 2235 | |
| 2236 | proc can_hardware_single_step {} { |
| 2237 | |
| 2238 | if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"] |
| 2239 | || [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"] |
| 2240 | || [istarget "nios2-*-*"] } { |
| 2241 | return 0 |
| 2242 | } |
| 2243 | |
| 2244 | return 1 |
| 2245 | } |
| 2246 | |
| 2247 | # Return 1 if target hardware or OS supports single stepping to signal |
| 2248 | # handler, otherwise, return 0. |
| 2249 | |
| 2250 | proc can_single_step_to_signal_handler {} { |
| 2251 | # Targets don't have hardware single step. On these targets, when |
| 2252 | # a signal is delivered during software single step, gdb is unable |
| 2253 | # to determine the next instruction addresses, because start of signal |
| 2254 | # handler is one of them. |
| 2255 | return [can_hardware_single_step] |
| 2256 | } |
| 2257 | |
| 2258 | # Return 1 if target supports process record, otherwise return 0. |
| 2259 | |
| 2260 | proc supports_process_record {} { |
| 2261 | |
| 2262 | if [target_info exists gdb,use_precord] { |
| 2263 | return [target_info gdb,use_precord] |
| 2264 | } |
| 2265 | |
| 2266 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
| 2267 | || [istarget "i\[34567\]86-*-linux*"] |
| 2268 | || [istarget "aarch64*-*-linux*"] |
| 2269 | || [istarget "powerpc*-*-linux*"] |
| 2270 | || [istarget "s390*-*-linux*"] } { |
| 2271 | return 1 |
| 2272 | } |
| 2273 | |
| 2274 | return 0 |
| 2275 | } |
| 2276 | |
| 2277 | # Return 1 if target supports reverse debugging, otherwise return 0. |
| 2278 | |
| 2279 | proc supports_reverse {} { |
| 2280 | |
| 2281 | if [target_info exists gdb,can_reverse] { |
| 2282 | return [target_info gdb,can_reverse] |
| 2283 | } |
| 2284 | |
| 2285 | if { [istarget "arm*-*-linux*"] || [istarget "x86_64-*-linux*"] |
| 2286 | || [istarget "i\[34567\]86-*-linux*"] |
| 2287 | || [istarget "aarch64*-*-linux*"] |
| 2288 | || [istarget "powerpc*-*-linux*"] |
| 2289 | || [istarget "s390*-*-linux*"] } { |
| 2290 | return 1 |
| 2291 | } |
| 2292 | |
| 2293 | return 0 |
| 2294 | } |
| 2295 | |
| 2296 | # Return 1 if readline library is used. |
| 2297 | |
| 2298 | proc readline_is_used { } { |
| 2299 | global gdb_prompt |
| 2300 | |
| 2301 | gdb_test_multiple "show editing" "" { |
| 2302 | -re ".*Editing of command lines as they are typed is on\..*$gdb_prompt $" { |
| 2303 | return 1 |
| 2304 | } |
| 2305 | -re ".*$gdb_prompt $" { |
| 2306 | return 0 |
| 2307 | } |
| 2308 | } |
| 2309 | } |
| 2310 | |
| 2311 | # Return 1 if target is ELF. |
| 2312 | gdb_caching_proc is_elf_target { |
| 2313 | set me "is_elf_target" |
| 2314 | |
| 2315 | set src [standard_temp_file is_elf_target[pid].c] |
| 2316 | set obj [standard_temp_file is_elf_target[pid].o] |
| 2317 | |
| 2318 | gdb_produce_source $src { |
| 2319 | int foo () {return 0;} |
| 2320 | } |
| 2321 | |
| 2322 | verbose "$me: compiling testfile $src" 2 |
| 2323 | set lines [gdb_compile $src $obj object {quiet}] |
| 2324 | |
| 2325 | file delete $src |
| 2326 | |
| 2327 | if ![string match "" $lines] then { |
| 2328 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2329 | return 0 |
| 2330 | } |
| 2331 | |
| 2332 | set fp_obj [open $obj "r"] |
| 2333 | fconfigure $fp_obj -translation binary |
| 2334 | set data [read $fp_obj] |
| 2335 | close $fp_obj |
| 2336 | |
| 2337 | file delete $obj |
| 2338 | |
| 2339 | set ELFMAG "\u007FELF" |
| 2340 | |
| 2341 | if {[string compare -length 4 $data $ELFMAG] != 0} { |
| 2342 | verbose "$me: returning 0" 2 |
| 2343 | return 0 |
| 2344 | } |
| 2345 | |
| 2346 | verbose "$me: returning 1" 2 |
| 2347 | return 1 |
| 2348 | } |
| 2349 | |
| 2350 | # Return 1 if the memory at address zero is readable. |
| 2351 | |
| 2352 | gdb_caching_proc is_address_zero_readable { |
| 2353 | global gdb_prompt |
| 2354 | |
| 2355 | set ret 0 |
| 2356 | gdb_test_multiple "x 0" "" { |
| 2357 | -re "Cannot access memory at address 0x0.*$gdb_prompt $" { |
| 2358 | set ret 0 |
| 2359 | } |
| 2360 | -re ".*$gdb_prompt $" { |
| 2361 | set ret 1 |
| 2362 | } |
| 2363 | } |
| 2364 | |
| 2365 | return $ret |
| 2366 | } |
| 2367 | |
| 2368 | # Produce source file NAME and write SOURCES into it. |
| 2369 | |
| 2370 | proc gdb_produce_source { name sources } { |
| 2371 | set index 0 |
| 2372 | set f [open $name "w"] |
| 2373 | |
| 2374 | puts $f $sources |
| 2375 | close $f |
| 2376 | } |
| 2377 | |
| 2378 | # Return 1 if target is ILP32. |
| 2379 | # This cannot be decided simply from looking at the target string, |
| 2380 | # as it might depend on externally passed compiler options like -m64. |
| 2381 | gdb_caching_proc is_ilp32_target { |
| 2382 | set me "is_ilp32_target" |
| 2383 | |
| 2384 | set src [standard_temp_file ilp32[pid].c] |
| 2385 | set obj [standard_temp_file ilp32[pid].o] |
| 2386 | |
| 2387 | gdb_produce_source $src { |
| 2388 | int dummy[sizeof (int) == 4 |
| 2389 | && sizeof (void *) == 4 |
| 2390 | && sizeof (long) == 4 ? 1 : -1]; |
| 2391 | } |
| 2392 | |
| 2393 | verbose "$me: compiling testfile $src" 2 |
| 2394 | set lines [gdb_compile $src $obj object {quiet}] |
| 2395 | file delete $src |
| 2396 | file delete $obj |
| 2397 | |
| 2398 | if ![string match "" $lines] then { |
| 2399 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2400 | return 0 |
| 2401 | } |
| 2402 | |
| 2403 | verbose "$me: returning 1" 2 |
| 2404 | return 1 |
| 2405 | } |
| 2406 | |
| 2407 | # Return 1 if target is LP64. |
| 2408 | # This cannot be decided simply from looking at the target string, |
| 2409 | # as it might depend on externally passed compiler options like -m64. |
| 2410 | gdb_caching_proc is_lp64_target { |
| 2411 | set me "is_lp64_target" |
| 2412 | |
| 2413 | set src [standard_temp_file lp64[pid].c] |
| 2414 | set obj [standard_temp_file lp64[pid].o] |
| 2415 | |
| 2416 | gdb_produce_source $src { |
| 2417 | int dummy[sizeof (int) == 4 |
| 2418 | && sizeof (void *) == 8 |
| 2419 | && sizeof (long) == 8 ? 1 : -1]; |
| 2420 | } |
| 2421 | |
| 2422 | verbose "$me: compiling testfile $src" 2 |
| 2423 | set lines [gdb_compile $src $obj object {quiet}] |
| 2424 | file delete $src |
| 2425 | file delete $obj |
| 2426 | |
| 2427 | if ![string match "" $lines] then { |
| 2428 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2429 | return 0 |
| 2430 | } |
| 2431 | |
| 2432 | verbose "$me: returning 1" 2 |
| 2433 | return 1 |
| 2434 | } |
| 2435 | |
| 2436 | # Return 1 if target has 64 bit addresses. |
| 2437 | # This cannot be decided simply from looking at the target string, |
| 2438 | # as it might depend on externally passed compiler options like -m64. |
| 2439 | gdb_caching_proc is_64_target { |
| 2440 | set me "is_64_target" |
| 2441 | |
| 2442 | set src [standard_temp_file is64[pid].c] |
| 2443 | set obj [standard_temp_file is64[pid].o] |
| 2444 | |
| 2445 | gdb_produce_source $src { |
| 2446 | int function(void) { return 3; } |
| 2447 | int dummy[sizeof (&function) == 8 ? 1 : -1]; |
| 2448 | } |
| 2449 | |
| 2450 | verbose "$me: compiling testfile $src" 2 |
| 2451 | set lines [gdb_compile $src $obj object {quiet}] |
| 2452 | file delete $src |
| 2453 | file delete $obj |
| 2454 | |
| 2455 | if ![string match "" $lines] then { |
| 2456 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2457 | return 0 |
| 2458 | } |
| 2459 | |
| 2460 | verbose "$me: returning 1" 2 |
| 2461 | return 1 |
| 2462 | } |
| 2463 | |
| 2464 | # Return 1 if target has x86_64 registers - either amd64 or x32. |
| 2465 | # x32 target identifies as x86_64-*-linux*, therefore it cannot be determined |
| 2466 | # just from the target string. |
| 2467 | gdb_caching_proc is_amd64_regs_target { |
| 2468 | if {![istarget "x86_64-*-*"] && ![istarget "i?86-*"]} { |
| 2469 | return 0 |
| 2470 | } |
| 2471 | |
| 2472 | set me "is_amd64_regs_target" |
| 2473 | |
| 2474 | set src [standard_temp_file reg64[pid].s] |
| 2475 | set obj [standard_temp_file reg64[pid].o] |
| 2476 | |
| 2477 | set list {} |
| 2478 | foreach reg \ |
| 2479 | {rax rbx rcx rdx rsi rdi rbp rsp r8 r9 r10 r11 r12 r13 r14 r15} { |
| 2480 | lappend list "\tincq %$reg" |
| 2481 | } |
| 2482 | gdb_produce_source $src [join $list \n] |
| 2483 | |
| 2484 | verbose "$me: compiling testfile $src" 2 |
| 2485 | set lines [gdb_compile $src $obj object {quiet}] |
| 2486 | file delete $src |
| 2487 | file delete $obj |
| 2488 | |
| 2489 | if ![string match "" $lines] then { |
| 2490 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2491 | return 0 |
| 2492 | } |
| 2493 | |
| 2494 | verbose "$me: returning 1" 2 |
| 2495 | return 1 |
| 2496 | } |
| 2497 | |
| 2498 | # Return 1 if this target is an x86 or x86-64 with -m32. |
| 2499 | proc is_x86_like_target {} { |
| 2500 | if {![istarget "x86_64-*-*"] && ![istarget i?86-*]} { |
| 2501 | return 0 |
| 2502 | } |
| 2503 | return [expr [is_ilp32_target] && ![is_amd64_regs_target]] |
| 2504 | } |
| 2505 | |
| 2506 | # Return 1 if this target is an arm or aarch32 on aarch64. |
| 2507 | |
| 2508 | gdb_caching_proc is_aarch32_target { |
| 2509 | if { [istarget "arm*-*-*"] } { |
| 2510 | return 1 |
| 2511 | } |
| 2512 | |
| 2513 | if { ![istarget "aarch64*-*-*"] } { |
| 2514 | return 0 |
| 2515 | } |
| 2516 | |
| 2517 | set me "is_aarch32_target" |
| 2518 | |
| 2519 | set src [standard_temp_file aarch32[pid].s] |
| 2520 | set obj [standard_temp_file aarch32[pid].o] |
| 2521 | |
| 2522 | set list {} |
| 2523 | foreach reg \ |
| 2524 | {r0 r1 r2 r3} { |
| 2525 | lappend list "\tmov $reg, $reg" |
| 2526 | } |
| 2527 | gdb_produce_source $src [join $list \n] |
| 2528 | |
| 2529 | verbose "$me: compiling testfile $src" 2 |
| 2530 | set lines [gdb_compile $src $obj object {quiet}] |
| 2531 | file delete $src |
| 2532 | file delete $obj |
| 2533 | |
| 2534 | if ![string match "" $lines] then { |
| 2535 | verbose "$me: testfile compilation failed, returning 0" 2 |
| 2536 | return 0 |
| 2537 | } |
| 2538 | |
| 2539 | verbose "$me: returning 1" 2 |
| 2540 | return 1 |
| 2541 | } |
| 2542 | |
| 2543 | # Return 1 if this target is an aarch64, either lp64 or ilp32. |
| 2544 | |
| 2545 | proc is_aarch64_target {} { |
| 2546 | if { ![istarget "aarch64*-*-*"] } { |
| 2547 | return 0 |
| 2548 | } |
| 2549 | |
| 2550 | return [expr ![is_aarch32_target]] |
| 2551 | } |
| 2552 | |
| 2553 | # Return 1 if displaced stepping is supported on target, otherwise, return 0. |
| 2554 | proc support_displaced_stepping {} { |
| 2555 | |
| 2556 | if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] |
| 2557 | || [istarget "arm*-*-linux*"] || [istarget "powerpc-*-linux*"] |
| 2558 | || [istarget "powerpc64-*-linux*"] || [istarget "s390*-*-*"] |
| 2559 | || [istarget "aarch64*-*-linux*"] } { |
| 2560 | return 1 |
| 2561 | } |
| 2562 | |
| 2563 | return 0 |
| 2564 | } |
| 2565 | |
| 2566 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
| 2567 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. |
| 2568 | |
| 2569 | gdb_caching_proc skip_altivec_tests { |
| 2570 | global srcdir subdir gdb_prompt inferior_exited_re |
| 2571 | |
| 2572 | set me "skip_altivec_tests" |
| 2573 | |
| 2574 | # Some simulators are known to not support VMX instructions. |
| 2575 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { |
| 2576 | verbose "$me: target known to not support VMX, returning 1" 2 |
| 2577 | return 1 |
| 2578 | } |
| 2579 | |
| 2580 | # Make sure we have a compiler that understands altivec. |
| 2581 | set compile_flags {debug nowarnings} |
| 2582 | if [get_compiler_info] { |
| 2583 | warning "Could not get compiler info" |
| 2584 | return 1 |
| 2585 | } |
| 2586 | if [test_compiler_info gcc*] { |
| 2587 | set compile_flags "$compile_flags additional_flags=-maltivec" |
| 2588 | } elseif [test_compiler_info xlc*] { |
| 2589 | set compile_flags "$compile_flags additional_flags=-qaltivec" |
| 2590 | } else { |
| 2591 | verbose "Could not compile with altivec support, returning 1" 2 |
| 2592 | return 1 |
| 2593 | } |
| 2594 | |
| 2595 | # Set up, compile, and execute a test program containing VMX instructions. |
| 2596 | # Include the current process ID in the file names to prevent conflicts |
| 2597 | # with invocations for multiple testsuites. |
| 2598 | set src [standard_temp_file vmx[pid].c] |
| 2599 | set exe [standard_temp_file vmx[pid].x] |
| 2600 | |
| 2601 | gdb_produce_source $src { |
| 2602 | int main() { |
| 2603 | #ifdef __MACH__ |
| 2604 | asm volatile ("vor v0,v0,v0"); |
| 2605 | #else |
| 2606 | asm volatile ("vor 0,0,0"); |
| 2607 | #endif |
| 2608 | return 0; |
| 2609 | } |
| 2610 | } |
| 2611 | |
| 2612 | verbose "$me: compiling testfile $src" 2 |
| 2613 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 2614 | file delete $src |
| 2615 | |
| 2616 | if ![string match "" $lines] then { |
| 2617 | verbose "$me: testfile compilation failed, returning 1" 2 |
| 2618 | return 1 |
| 2619 | } |
| 2620 | |
| 2621 | # No error message, compilation succeeded so now run it via gdb. |
| 2622 | |
| 2623 | gdb_exit |
| 2624 | gdb_start |
| 2625 | gdb_reinitialize_dir $srcdir/$subdir |
| 2626 | gdb_load "$exe" |
| 2627 | gdb_run_cmd |
| 2628 | gdb_expect { |
| 2629 | -re ".*Illegal instruction.*${gdb_prompt} $" { |
| 2630 | verbose -log "\n$me altivec hardware not detected" |
| 2631 | set skip_vmx_tests 1 |
| 2632 | } |
| 2633 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
| 2634 | verbose -log "\n$me: altivec hardware detected" |
| 2635 | set skip_vmx_tests 0 |
| 2636 | } |
| 2637 | default { |
| 2638 | warning "\n$me: default case taken" |
| 2639 | set skip_vmx_tests 1 |
| 2640 | } |
| 2641 | } |
| 2642 | gdb_exit |
| 2643 | remote_file build delete $exe |
| 2644 | |
| 2645 | verbose "$me: returning $skip_vmx_tests" 2 |
| 2646 | return $skip_vmx_tests |
| 2647 | } |
| 2648 | |
| 2649 | # Run a test on the target to see if it supports vmx hardware. Return 0 if so, |
| 2650 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. |
| 2651 | |
| 2652 | gdb_caching_proc skip_vsx_tests { |
| 2653 | global srcdir subdir gdb_prompt inferior_exited_re |
| 2654 | |
| 2655 | set me "skip_vsx_tests" |
| 2656 | |
| 2657 | # Some simulators are known to not support Altivec instructions, so |
| 2658 | # they won't support VSX instructions as well. |
| 2659 | if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } { |
| 2660 | verbose "$me: target known to not support VSX, returning 1" 2 |
| 2661 | return 1 |
| 2662 | } |
| 2663 | |
| 2664 | # Make sure we have a compiler that understands altivec. |
| 2665 | set compile_flags {debug nowarnings quiet} |
| 2666 | if [get_compiler_info] { |
| 2667 | warning "Could not get compiler info" |
| 2668 | return 1 |
| 2669 | } |
| 2670 | if [test_compiler_info gcc*] { |
| 2671 | set compile_flags "$compile_flags additional_flags=-mvsx" |
| 2672 | } elseif [test_compiler_info xlc*] { |
| 2673 | set compile_flags "$compile_flags additional_flags=-qasm=gcc" |
| 2674 | } else { |
| 2675 | verbose "Could not compile with vsx support, returning 1" 2 |
| 2676 | return 1 |
| 2677 | } |
| 2678 | |
| 2679 | set src [standard_temp_file vsx[pid].c] |
| 2680 | set exe [standard_temp_file vsx[pid].x] |
| 2681 | |
| 2682 | gdb_produce_source $src { |
| 2683 | int main() { |
| 2684 | double a[2] = { 1.0, 2.0 }; |
| 2685 | #ifdef __MACH__ |
| 2686 | asm volatile ("lxvd2x v0,v0,%[addr]" : : [addr] "r" (a)); |
| 2687 | #else |
| 2688 | asm volatile ("lxvd2x 0,0,%[addr]" : : [addr] "r" (a)); |
| 2689 | #endif |
| 2690 | return 0; |
| 2691 | } |
| 2692 | } |
| 2693 | |
| 2694 | verbose "$me: compiling testfile $src" 2 |
| 2695 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 2696 | file delete $src |
| 2697 | |
| 2698 | if ![string match "" $lines] then { |
| 2699 | verbose "$me: testfile compilation failed, returning 1" 2 |
| 2700 | return 1 |
| 2701 | } |
| 2702 | |
| 2703 | # No error message, compilation succeeded so now run it via gdb. |
| 2704 | |
| 2705 | gdb_exit |
| 2706 | gdb_start |
| 2707 | gdb_reinitialize_dir $srcdir/$subdir |
| 2708 | gdb_load "$exe" |
| 2709 | gdb_run_cmd |
| 2710 | gdb_expect { |
| 2711 | -re ".*Illegal instruction.*${gdb_prompt} $" { |
| 2712 | verbose -log "\n$me VSX hardware not detected" |
| 2713 | set skip_vsx_tests 1 |
| 2714 | } |
| 2715 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
| 2716 | verbose -log "\n$me: VSX hardware detected" |
| 2717 | set skip_vsx_tests 0 |
| 2718 | } |
| 2719 | default { |
| 2720 | warning "\n$me: default case taken" |
| 2721 | set skip_vsx_tests 1 |
| 2722 | } |
| 2723 | } |
| 2724 | gdb_exit |
| 2725 | remote_file build delete $exe |
| 2726 | |
| 2727 | verbose "$me: returning $skip_vsx_tests" 2 |
| 2728 | return $skip_vsx_tests |
| 2729 | } |
| 2730 | |
| 2731 | # Run a test on the target to see if it supports TSX hardware. Return 0 if so, |
| 2732 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. |
| 2733 | |
| 2734 | gdb_caching_proc skip_tsx_tests { |
| 2735 | global srcdir subdir gdb_prompt inferior_exited_re |
| 2736 | |
| 2737 | set me "skip_tsx_tests" |
| 2738 | |
| 2739 | set src [standard_temp_file tsx[pid].c] |
| 2740 | set exe [standard_temp_file tsx[pid].x] |
| 2741 | |
| 2742 | gdb_produce_source $src { |
| 2743 | int main() { |
| 2744 | asm volatile ("xbegin .L0"); |
| 2745 | asm volatile ("xend"); |
| 2746 | asm volatile (".L0: nop"); |
| 2747 | return 0; |
| 2748 | } |
| 2749 | } |
| 2750 | |
| 2751 | verbose "$me: compiling testfile $src" 2 |
| 2752 | set lines [gdb_compile $src $exe executable {nowarnings quiet}] |
| 2753 | file delete $src |
| 2754 | |
| 2755 | if ![string match "" $lines] then { |
| 2756 | verbose "$me: testfile compilation failed." 2 |
| 2757 | return 1 |
| 2758 | } |
| 2759 | |
| 2760 | # No error message, compilation succeeded so now run it via gdb. |
| 2761 | |
| 2762 | gdb_exit |
| 2763 | gdb_start |
| 2764 | gdb_reinitialize_dir $srcdir/$subdir |
| 2765 | gdb_load "$exe" |
| 2766 | gdb_run_cmd |
| 2767 | gdb_expect { |
| 2768 | -re ".*Illegal instruction.*${gdb_prompt} $" { |
| 2769 | verbose -log "$me: TSX hardware not detected." |
| 2770 | set skip_tsx_tests 1 |
| 2771 | } |
| 2772 | -re ".*$inferior_exited_re normally.*${gdb_prompt} $" { |
| 2773 | verbose -log "$me: TSX hardware detected." |
| 2774 | set skip_tsx_tests 0 |
| 2775 | } |
| 2776 | default { |
| 2777 | warning "\n$me: default case taken." |
| 2778 | set skip_tsx_tests 1 |
| 2779 | } |
| 2780 | } |
| 2781 | gdb_exit |
| 2782 | remote_file build delete $exe |
| 2783 | |
| 2784 | verbose "$me: returning $skip_tsx_tests" 2 |
| 2785 | return $skip_tsx_tests |
| 2786 | } |
| 2787 | |
| 2788 | # Run a test on the target to see if it supports btrace hardware. Return 0 if so, |
| 2789 | # 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite. |
| 2790 | |
| 2791 | gdb_caching_proc skip_btrace_tests { |
| 2792 | global srcdir subdir gdb_prompt inferior_exited_re |
| 2793 | |
| 2794 | set me "skip_btrace_tests" |
| 2795 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { |
| 2796 | verbose "$me: target does not support btrace, returning 1" 2 |
| 2797 | return 1 |
| 2798 | } |
| 2799 | |
| 2800 | # Set up, compile, and execute a test program. |
| 2801 | # Include the current process ID in the file names to prevent conflicts |
| 2802 | # with invocations for multiple testsuites. |
| 2803 | set src [standard_temp_file btrace[pid].c] |
| 2804 | set exe [standard_temp_file btrace[pid].x] |
| 2805 | |
| 2806 | gdb_produce_source $src { |
| 2807 | int main(void) { return 0; } |
| 2808 | } |
| 2809 | |
| 2810 | verbose "$me: compiling testfile $src" 2 |
| 2811 | set compile_flags {debug nowarnings quiet} |
| 2812 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 2813 | |
| 2814 | if ![string match "" $lines] then { |
| 2815 | verbose "$me: testfile compilation failed, returning 1" 2 |
| 2816 | file delete $src |
| 2817 | return 1 |
| 2818 | } |
| 2819 | |
| 2820 | # No error message, compilation succeeded so now run it via gdb. |
| 2821 | |
| 2822 | gdb_exit |
| 2823 | gdb_start |
| 2824 | gdb_reinitialize_dir $srcdir/$subdir |
| 2825 | gdb_load $exe |
| 2826 | if ![runto_main] { |
| 2827 | file delete $src |
| 2828 | return 1 |
| 2829 | } |
| 2830 | file delete $src |
| 2831 | # In case of an unexpected output, we return 2 as a fail value. |
| 2832 | set skip_btrace_tests 2 |
| 2833 | gdb_test_multiple "record btrace" "check btrace support" { |
| 2834 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { |
| 2835 | set skip_btrace_tests 1 |
| 2836 | } |
| 2837 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { |
| 2838 | set skip_btrace_tests 1 |
| 2839 | } |
| 2840 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { |
| 2841 | set skip_btrace_tests 1 |
| 2842 | } |
| 2843 | -re "^record btrace\r\n$gdb_prompt $" { |
| 2844 | set skip_btrace_tests 0 |
| 2845 | } |
| 2846 | } |
| 2847 | gdb_exit |
| 2848 | remote_file build delete $exe |
| 2849 | |
| 2850 | verbose "$me: returning $skip_btrace_tests" 2 |
| 2851 | return $skip_btrace_tests |
| 2852 | } |
| 2853 | |
| 2854 | # Run a test on the target to see if it supports btrace pt hardware. |
| 2855 | # Return 0 if so, 1 if it does not. Based on 'check_vmx_hw_available' |
| 2856 | # from the GCC testsuite. |
| 2857 | |
| 2858 | gdb_caching_proc skip_btrace_pt_tests { |
| 2859 | global srcdir subdir gdb_prompt inferior_exited_re |
| 2860 | |
| 2861 | set me "skip_btrace_tests" |
| 2862 | if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } { |
| 2863 | verbose "$me: target does not support btrace, returning 1" 2 |
| 2864 | return 1 |
| 2865 | } |
| 2866 | |
| 2867 | # Set up, compile, and execute a test program. |
| 2868 | # Include the current process ID in the file names to prevent conflicts |
| 2869 | # with invocations for multiple testsuites. |
| 2870 | set src [standard_temp_file btrace[pid].c] |
| 2871 | set exe [standard_temp_file btrace[pid].x] |
| 2872 | |
| 2873 | gdb_produce_source $src { |
| 2874 | int main(void) { return 0; } |
| 2875 | } |
| 2876 | |
| 2877 | verbose "$me: compiling testfile $src" 2 |
| 2878 | set compile_flags {debug nowarnings quiet} |
| 2879 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 2880 | |
| 2881 | if ![string match "" $lines] then { |
| 2882 | verbose "$me: testfile compilation failed, returning 1" 2 |
| 2883 | file delete $src |
| 2884 | return 1 |
| 2885 | } |
| 2886 | |
| 2887 | # No error message, compilation succeeded so now run it via gdb. |
| 2888 | |
| 2889 | gdb_exit |
| 2890 | gdb_start |
| 2891 | gdb_reinitialize_dir $srcdir/$subdir |
| 2892 | gdb_load $exe |
| 2893 | if ![runto_main] { |
| 2894 | file delete $src |
| 2895 | return 1 |
| 2896 | } |
| 2897 | file delete $src |
| 2898 | # In case of an unexpected output, we return 2 as a fail value. |
| 2899 | set skip_btrace_tests 2 |
| 2900 | gdb_test_multiple "record btrace pt" "check btrace support" { |
| 2901 | -re "You can't do that when your target is.*\r\n$gdb_prompt $" { |
| 2902 | set skip_btrace_tests 1 |
| 2903 | } |
| 2904 | -re "Target does not support branch tracing.*\r\n$gdb_prompt $" { |
| 2905 | set skip_btrace_tests 1 |
| 2906 | } |
| 2907 | -re "Could not enable branch tracing.*\r\n$gdb_prompt $" { |
| 2908 | set skip_btrace_tests 1 |
| 2909 | } |
| 2910 | -re "GDB does not support.*\r\n$gdb_prompt $" { |
| 2911 | set skip_btrace_tests 1 |
| 2912 | } |
| 2913 | -re "^record btrace pt\r\n$gdb_prompt $" { |
| 2914 | set skip_btrace_tests 0 |
| 2915 | } |
| 2916 | } |
| 2917 | gdb_exit |
| 2918 | remote_file build delete $exe |
| 2919 | |
| 2920 | verbose "$me: returning $skip_btrace_tests" 2 |
| 2921 | return $skip_btrace_tests |
| 2922 | } |
| 2923 | |
| 2924 | # Return whether we should skip tests for showing inlined functions in |
| 2925 | # backtraces. Requires get_compiler_info and get_debug_format. |
| 2926 | |
| 2927 | proc skip_inline_frame_tests {} { |
| 2928 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). |
| 2929 | if { ! [test_debug_format "DWARF 2"] } { |
| 2930 | return 1 |
| 2931 | } |
| 2932 | |
| 2933 | # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line. |
| 2934 | if { ([test_compiler_info "gcc-2-*"] |
| 2935 | || [test_compiler_info "gcc-3-*"] |
| 2936 | || [test_compiler_info "gcc-4-0-*"]) } { |
| 2937 | return 1 |
| 2938 | } |
| 2939 | |
| 2940 | return 0 |
| 2941 | } |
| 2942 | |
| 2943 | # Return whether we should skip tests for showing variables from |
| 2944 | # inlined functions. Requires get_compiler_info and get_debug_format. |
| 2945 | |
| 2946 | proc skip_inline_var_tests {} { |
| 2947 | # GDB only recognizes inlining information in DWARF 2 (DWARF 3). |
| 2948 | if { ! [test_debug_format "DWARF 2"] } { |
| 2949 | return 1 |
| 2950 | } |
| 2951 | |
| 2952 | return 0 |
| 2953 | } |
| 2954 | |
| 2955 | # Return a 1 if we should skip tests that require hardware breakpoints |
| 2956 | |
| 2957 | proc skip_hw_breakpoint_tests {} { |
| 2958 | # Skip tests if requested by the board (note that no_hardware_watchpoints |
| 2959 | # disables both watchpoints and breakpoints) |
| 2960 | if { [target_info exists gdb,no_hardware_watchpoints]} { |
| 2961 | return 1 |
| 2962 | } |
| 2963 | |
| 2964 | # These targets support hardware breakpoints natively |
| 2965 | if { [istarget "i?86-*-*"] |
| 2966 | || [istarget "x86_64-*-*"] |
| 2967 | || [istarget "ia64-*-*"] |
| 2968 | || [istarget "arm*-*-*"] |
| 2969 | || [istarget "aarch64*-*-*"] |
| 2970 | || [istarget "s390*-*-*"] } { |
| 2971 | return 0 |
| 2972 | } |
| 2973 | |
| 2974 | return 1 |
| 2975 | } |
| 2976 | |
| 2977 | # Return a 1 if we should skip tests that require hardware watchpoints |
| 2978 | |
| 2979 | proc skip_hw_watchpoint_tests {} { |
| 2980 | # Skip tests if requested by the board |
| 2981 | if { [target_info exists gdb,no_hardware_watchpoints]} { |
| 2982 | return 1 |
| 2983 | } |
| 2984 | |
| 2985 | # These targets support hardware watchpoints natively |
| 2986 | if { [istarget "i?86-*-*"] |
| 2987 | || [istarget "x86_64-*-*"] |
| 2988 | || [istarget "ia64-*-*"] |
| 2989 | || [istarget "arm*-*-*"] |
| 2990 | || [istarget "aarch64*-*-*"] |
| 2991 | || [istarget "powerpc*-*-linux*"] |
| 2992 | || [istarget "s390*-*-*"] } { |
| 2993 | return 0 |
| 2994 | } |
| 2995 | |
| 2996 | return 1 |
| 2997 | } |
| 2998 | |
| 2999 | # Return a 1 if we should skip tests that require *multiple* hardware |
| 3000 | # watchpoints to be active at the same time |
| 3001 | |
| 3002 | proc skip_hw_watchpoint_multi_tests {} { |
| 3003 | if { [skip_hw_watchpoint_tests] } { |
| 3004 | return 1 |
| 3005 | } |
| 3006 | |
| 3007 | # These targets support just a single hardware watchpoint |
| 3008 | if { [istarget "arm*-*-*"] |
| 3009 | || [istarget "powerpc*-*-linux*"] } { |
| 3010 | return 1 |
| 3011 | } |
| 3012 | |
| 3013 | return 0 |
| 3014 | } |
| 3015 | |
| 3016 | # Return a 1 if we should skip tests that require read/access watchpoints |
| 3017 | |
| 3018 | proc skip_hw_watchpoint_access_tests {} { |
| 3019 | if { [skip_hw_watchpoint_tests] } { |
| 3020 | return 1 |
| 3021 | } |
| 3022 | |
| 3023 | # These targets support just write watchpoints |
| 3024 | if { [istarget "s390*-*-*"] } { |
| 3025 | return 1 |
| 3026 | } |
| 3027 | |
| 3028 | return 0 |
| 3029 | } |
| 3030 | |
| 3031 | # Return 1 if we should skip tests that require the runtime unwinder |
| 3032 | # hook. This must be invoked while gdb is running, after shared |
| 3033 | # libraries have been loaded. This is needed because otherwise a |
| 3034 | # shared libgcc won't be visible. |
| 3035 | |
| 3036 | proc skip_unwinder_tests {} { |
| 3037 | global gdb_prompt |
| 3038 | |
| 3039 | set ok 0 |
| 3040 | gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" { |
| 3041 | -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" { |
| 3042 | } |
| 3043 | -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" { |
| 3044 | set ok 1 |
| 3045 | } |
| 3046 | -re "No symbol .* in current context.\r\n$gdb_prompt $" { |
| 3047 | } |
| 3048 | } |
| 3049 | if {!$ok} { |
| 3050 | gdb_test_multiple "info probe" "check for stap probe in unwinder" { |
| 3051 | -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" { |
| 3052 | set ok 1 |
| 3053 | } |
| 3054 | -re "\r\n$gdb_prompt $" { |
| 3055 | } |
| 3056 | } |
| 3057 | } |
| 3058 | return $ok |
| 3059 | } |
| 3060 | |
| 3061 | # Return 0 if we should skip tests that require the libstdc++ stap |
| 3062 | # probes. This must be invoked while gdb is running, after shared |
| 3063 | # libraries have been loaded. |
| 3064 | |
| 3065 | proc skip_libstdcxx_probe_tests {} { |
| 3066 | global gdb_prompt |
| 3067 | |
| 3068 | set ok 0 |
| 3069 | gdb_test_multiple "info probe" "check for stap probe in libstdc++" { |
| 3070 | -re ".*libstdcxx.*catch.*\r\n$gdb_prompt $" { |
| 3071 | set ok 1 |
| 3072 | } |
| 3073 | -re "\r\n$gdb_prompt $" { |
| 3074 | } |
| 3075 | } |
| 3076 | return $ok |
| 3077 | } |
| 3078 | |
| 3079 | # Return 1 if we should skip tests of the "compile" feature. |
| 3080 | # This must be invoked after the inferior has been started. |
| 3081 | |
| 3082 | proc skip_compile_feature_tests {} { |
| 3083 | global gdb_prompt |
| 3084 | |
| 3085 | set result 0 |
| 3086 | gdb_test_multiple "compile code -- ;" "check for working compile command" { |
| 3087 | "Could not load libcc1.*\r\n$gdb_prompt $" { |
| 3088 | set result 1 |
| 3089 | } |
| 3090 | -re "Command not supported on this host\\..*\r\n$gdb_prompt $" { |
| 3091 | set result 1 |
| 3092 | } |
| 3093 | -re "\r\n$gdb_prompt $" { |
| 3094 | } |
| 3095 | } |
| 3096 | return $result |
| 3097 | } |
| 3098 | |
| 3099 | # Helper for gdb_is_target_remote. PROMPT_REGEXP is the expected |
| 3100 | # prompt. |
| 3101 | |
| 3102 | proc gdb_is_target_remote_prompt { prompt_regexp } { |
| 3103 | |
| 3104 | set test "probe for target remote" |
| 3105 | gdb_test_multiple "maint print target-stack" $test { |
| 3106 | -re ".*emote serial target in gdb-specific protocol.*$prompt_regexp" { |
| 3107 | pass $test |
| 3108 | return 1 |
| 3109 | } |
| 3110 | -re "$prompt_regexp" { |
| 3111 | pass $test |
| 3112 | } |
| 3113 | } |
| 3114 | return 0 |
| 3115 | } |
| 3116 | |
| 3117 | # Check whether we're testing with the remote or extended-remote |
| 3118 | # targets. |
| 3119 | |
| 3120 | proc gdb_is_target_remote {} { |
| 3121 | global gdb_prompt |
| 3122 | |
| 3123 | return [gdb_is_target_remote_prompt "$gdb_prompt $"] |
| 3124 | } |
| 3125 | |
| 3126 | # Return the effective value of use_gdb_stub. |
| 3127 | # |
| 3128 | # If the use_gdb_stub global has been set (it is set when the gdb process is |
| 3129 | # spawned), return that. Otherwise, return the value of the use_gdb_stub |
| 3130 | # property from the board file. |
| 3131 | # |
| 3132 | # This is the preferred way of checking use_gdb_stub, since it allows to check |
| 3133 | # the value before the gdb has been spawned and it will return the correct value |
| 3134 | # even when it was overriden by the test. |
| 3135 | |
| 3136 | proc use_gdb_stub {} { |
| 3137 | global use_gdb_stub |
| 3138 | |
| 3139 | if [info exists use_gdb_stub] { |
| 3140 | return $use_gdb_stub |
| 3141 | } |
| 3142 | |
| 3143 | return [target_info exists use_gdb_stub] |
| 3144 | } |
| 3145 | |
| 3146 | # Return 1 if the current remote target is an instance of our GDBserver, 0 |
| 3147 | # otherwise. Return -1 if there was an error and we can't tell. |
| 3148 | |
| 3149 | gdb_caching_proc target_is_gdbserver { |
| 3150 | global gdb_prompt |
| 3151 | |
| 3152 | set is_gdbserver -1 |
| 3153 | set test "Probing for GDBserver" |
| 3154 | |
| 3155 | gdb_test_multiple "monitor help" $test { |
| 3156 | -re "The following monitor commands are supported.*Quit GDBserver.*$gdb_prompt $" { |
| 3157 | set is_gdbserver 1 |
| 3158 | } |
| 3159 | -re "$gdb_prompt $" { |
| 3160 | set is_gdbserver 0 |
| 3161 | } |
| 3162 | } |
| 3163 | |
| 3164 | if { $is_gdbserver == -1 } { |
| 3165 | verbose -log "Unable to tell whether we are using GDBserver or not." |
| 3166 | } |
| 3167 | |
| 3168 | return $is_gdbserver |
| 3169 | } |
| 3170 | |
| 3171 | # N.B. compiler_info is intended to be local to this file. |
| 3172 | # Call test_compiler_info with no arguments to fetch its value. |
| 3173 | # Yes, this is counterintuitive when there's get_compiler_info, |
| 3174 | # but that's the current API. |
| 3175 | if [info exists compiler_info] { |
| 3176 | unset compiler_info |
| 3177 | } |
| 3178 | |
| 3179 | set gcc_compiled 0 |
| 3180 | |
| 3181 | # Figure out what compiler I am using. |
| 3182 | # The result is cached so only the first invocation runs the compiler. |
| 3183 | # |
| 3184 | # ARG can be empty or "C++". If empty, "C" is assumed. |
| 3185 | # |
| 3186 | # There are several ways to do this, with various problems. |
| 3187 | # |
| 3188 | # [ gdb_compile -E $ifile -o $binfile.ci ] |
| 3189 | # source $binfile.ci |
| 3190 | # |
| 3191 | # Single Unix Spec v3 says that "-E -o ..." together are not |
| 3192 | # specified. And in fact, the native compiler on hp-ux 11 (among |
| 3193 | # others) does not work with "-E -o ...". Most targets used to do |
| 3194 | # this, and it mostly worked, because it works with gcc. |
| 3195 | # |
| 3196 | # [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ] |
| 3197 | # source $binfile.ci |
| 3198 | # |
| 3199 | # This avoids the problem with -E and -o together. This almost works |
| 3200 | # if the build machine is the same as the host machine, which is |
| 3201 | # usually true of the targets which are not gcc. But this code does |
| 3202 | # not figure which compiler to call, and it always ends up using the C |
| 3203 | # compiler. Not good for setting hp_aCC_compiler. Target |
| 3204 | # hppa*-*-hpux* used to do this. |
| 3205 | # |
| 3206 | # [ gdb_compile -E $ifile > $binfile.ci ] |
| 3207 | # source $binfile.ci |
| 3208 | # |
| 3209 | # dejagnu target_compile says that it supports output redirection, |
| 3210 | # but the code is completely different from the normal path and I |
| 3211 | # don't want to sweep the mines from that path. So I didn't even try |
| 3212 | # this. |
| 3213 | # |
| 3214 | # set cppout [ gdb_compile $ifile "" preprocess $args quiet ] |
| 3215 | # eval $cppout |
| 3216 | # |
| 3217 | # I actually do this for all targets now. gdb_compile runs the right |
| 3218 | # compiler, and TCL captures the output, and I eval the output. |
| 3219 | # |
| 3220 | # Unfortunately, expect logs the output of the command as it goes by, |
| 3221 | # and dejagnu helpfully prints a second copy of it right afterwards. |
| 3222 | # So I turn off expect logging for a moment. |
| 3223 | # |
| 3224 | # [ gdb_compile $ifile $ciexe_file executable $args ] |
| 3225 | # [ remote_exec $ciexe_file ] |
| 3226 | # [ source $ci_file.out ] |
| 3227 | # |
| 3228 | # I could give up on -E and just do this. |
| 3229 | # I didn't get desperate enough to try this. |
| 3230 | # |
| 3231 | # -- chastain 2004-01-06 |
| 3232 | |
| 3233 | proc get_compiler_info {{arg ""}} { |
| 3234 | # For compiler.c and compiler.cc |
| 3235 | global srcdir |
| 3236 | |
| 3237 | # I am going to play with the log to keep noise out. |
| 3238 | global outdir |
| 3239 | global tool |
| 3240 | |
| 3241 | # These come from compiler.c or compiler.cc |
| 3242 | global compiler_info |
| 3243 | |
| 3244 | # Legacy global data symbols. |
| 3245 | global gcc_compiled |
| 3246 | |
| 3247 | if [info exists compiler_info] { |
| 3248 | # Already computed. |
| 3249 | return 0 |
| 3250 | } |
| 3251 | |
| 3252 | # Choose which file to preprocess. |
| 3253 | set ifile "${srcdir}/lib/compiler.c" |
| 3254 | if { $arg == "c++" } { |
| 3255 | set ifile "${srcdir}/lib/compiler.cc" |
| 3256 | } |
| 3257 | |
| 3258 | # Run $ifile through the right preprocessor. |
| 3259 | # Toggle gdb.log to keep the compiler output out of the log. |
| 3260 | set saved_log [log_file -info] |
| 3261 | log_file |
| 3262 | if [is_remote host] { |
| 3263 | # We have to use -E and -o together, despite the comments |
| 3264 | # above, because of how DejaGnu handles remote host testing. |
| 3265 | set ppout "$outdir/compiler.i" |
| 3266 | gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet] |
| 3267 | set file [open $ppout r] |
| 3268 | set cppout [read $file] |
| 3269 | close $file |
| 3270 | } else { |
| 3271 | set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ] |
| 3272 | } |
| 3273 | eval log_file $saved_log |
| 3274 | |
| 3275 | # Eval the output. |
| 3276 | set unknown 0 |
| 3277 | foreach cppline [ split "$cppout" "\n" ] { |
| 3278 | if { [ regexp "^#" "$cppline" ] } { |
| 3279 | # line marker |
| 3280 | } elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } { |
| 3281 | # blank line |
| 3282 | } elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } { |
| 3283 | # eval this line |
| 3284 | verbose "get_compiler_info: $cppline" 2 |
| 3285 | eval "$cppline" |
| 3286 | } else { |
| 3287 | # unknown line |
| 3288 | verbose -log "get_compiler_info: $cppline" |
| 3289 | set unknown 1 |
| 3290 | } |
| 3291 | } |
| 3292 | |
| 3293 | # Set to unknown if for some reason compiler_info didn't get defined. |
| 3294 | if ![info exists compiler_info] { |
| 3295 | verbose -log "get_compiler_info: compiler_info not provided" |
| 3296 | set compiler_info "unknown" |
| 3297 | } |
| 3298 | # Also set to unknown compiler if any diagnostics happened. |
| 3299 | if { $unknown } { |
| 3300 | verbose -log "get_compiler_info: got unexpected diagnostics" |
| 3301 | set compiler_info "unknown" |
| 3302 | } |
| 3303 | |
| 3304 | # Set the legacy symbols. |
| 3305 | set gcc_compiled 0 |
| 3306 | regexp "^gcc-(\[0-9\]+)-" "$compiler_info" matchall gcc_compiled |
| 3307 | |
| 3308 | # Log what happened. |
| 3309 | verbose -log "get_compiler_info: $compiler_info" |
| 3310 | |
| 3311 | # Most compilers will evaluate comparisons and other boolean |
| 3312 | # operations to 0 or 1. |
| 3313 | uplevel \#0 { set true 1 } |
| 3314 | uplevel \#0 { set false 0 } |
| 3315 | |
| 3316 | return 0 |
| 3317 | } |
| 3318 | |
| 3319 | # Return the compiler_info string if no arg is provided. |
| 3320 | # Otherwise the argument is a glob-style expression to match against |
| 3321 | # compiler_info. |
| 3322 | |
| 3323 | proc test_compiler_info { {compiler ""} } { |
| 3324 | global compiler_info |
| 3325 | get_compiler_info |
| 3326 | |
| 3327 | # If no arg, return the compiler_info string. |
| 3328 | if [string match "" $compiler] { |
| 3329 | return $compiler_info |
| 3330 | } |
| 3331 | |
| 3332 | return [string match $compiler $compiler_info] |
| 3333 | } |
| 3334 | |
| 3335 | proc current_target_name { } { |
| 3336 | global target_info |
| 3337 | if [info exists target_info(target,name)] { |
| 3338 | set answer $target_info(target,name) |
| 3339 | } else { |
| 3340 | set answer "" |
| 3341 | } |
| 3342 | return $answer |
| 3343 | } |
| 3344 | |
| 3345 | set gdb_wrapper_initialized 0 |
| 3346 | set gdb_wrapper_target "" |
| 3347 | |
| 3348 | proc gdb_wrapper_init { args } { |
| 3349 | global gdb_wrapper_initialized |
| 3350 | global gdb_wrapper_file |
| 3351 | global gdb_wrapper_flags |
| 3352 | global gdb_wrapper_target |
| 3353 | |
| 3354 | if { $gdb_wrapper_initialized == 1 } { return; } |
| 3355 | |
| 3356 | if {[target_info exists needs_status_wrapper] && \ |
| 3357 | [target_info needs_status_wrapper] != "0"} { |
| 3358 | set result [build_wrapper "testglue.o"] |
| 3359 | if { $result != "" } { |
| 3360 | set gdb_wrapper_file [lindex $result 0] |
| 3361 | set gdb_wrapper_flags [lindex $result 1] |
| 3362 | } else { |
| 3363 | warning "Status wrapper failed to build." |
| 3364 | } |
| 3365 | } |
| 3366 | set gdb_wrapper_initialized 1 |
| 3367 | set gdb_wrapper_target [current_target_name] |
| 3368 | } |
| 3369 | |
| 3370 | # Some targets need to always link a special object in. Save its path here. |
| 3371 | global gdb_saved_set_unbuffered_mode_obj |
| 3372 | set gdb_saved_set_unbuffered_mode_obj "" |
| 3373 | |
| 3374 | # Compile source files specified by SOURCE into a binary of type TYPE at path |
| 3375 | # DEST. gdb_compile is implemented using DejaGnu's target_compile, so the type |
| 3376 | # parameter and most options are passed directly to it. |
| 3377 | # |
| 3378 | # The type can be one of the following: |
| 3379 | # |
| 3380 | # - object: Compile into an object file. |
| 3381 | # - executable: Compile and link into an executable. |
| 3382 | # - preprocess: Preprocess the source files. |
| 3383 | # - assembly: Generate assembly listing. |
| 3384 | # |
| 3385 | # The following options are understood and processed by gdb_compile: |
| 3386 | # |
| 3387 | # - shlib=so_path: Add SO_PATH to the sources, and enable some target-specific |
| 3388 | # quirks to be able to use shared libraries. |
| 3389 | # - shlib_load: Link with appropriate libraries to allow the test to |
| 3390 | # dynamically load libraries at runtime. For example, on Linux, this adds |
| 3391 | # -ldl so that the test can use dlopen. |
| 3392 | # - nowarnings: Inhibit all compiler warnings. |
| 3393 | # |
| 3394 | # And here are some of the not too obscure options understood by DejaGnu that |
| 3395 | # influence the compilation: |
| 3396 | # |
| 3397 | # - additional_flags=flag: Add FLAG to the compiler flags. |
| 3398 | # - libs=library: Add LIBRARY to the libraries passed to the linker. The |
| 3399 | # argument can be a file, in which case it's added to the sources, or a |
| 3400 | # linker flag. |
| 3401 | # - ldflags=flag: Add FLAG to the linker flags. |
| 3402 | # - incdir=path: Add PATH to the searched include directories. |
| 3403 | # - libdir=path: Add PATH to the linker searched directories. |
| 3404 | # - ada, c++, f77: Compile the file as Ada, C++ or Fortran. |
| 3405 | # - debug: Build with debug information. |
| 3406 | # - optimize: Build with optimization. |
| 3407 | |
| 3408 | proc gdb_compile {source dest type options} { |
| 3409 | global GDB_TESTCASE_OPTIONS |
| 3410 | global gdb_wrapper_file |
| 3411 | global gdb_wrapper_flags |
| 3412 | global gdb_wrapper_initialized |
| 3413 | global srcdir |
| 3414 | global objdir |
| 3415 | global gdb_saved_set_unbuffered_mode_obj |
| 3416 | |
| 3417 | set outdir [file dirname $dest] |
| 3418 | |
| 3419 | # Add platform-specific options if a shared library was specified using |
| 3420 | # "shlib=librarypath" in OPTIONS. |
| 3421 | set new_options "" |
| 3422 | set shlib_found 0 |
| 3423 | set shlib_load 0 |
| 3424 | foreach opt $options { |
| 3425 | if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] { |
| 3426 | if [test_compiler_info "xlc-*"] { |
| 3427 | # IBM xlc compiler doesn't accept shared library named other |
| 3428 | # than .so: use "-Wl," to bypass this |
| 3429 | lappend source "-Wl,$shlib_name" |
| 3430 | } elseif { ([istarget "*-*-mingw*"] |
| 3431 | || [istarget *-*-cygwin*] |
| 3432 | || [istarget *-*-pe*])} { |
| 3433 | lappend source "${shlib_name}.a" |
| 3434 | } else { |
| 3435 | lappend source $shlib_name |
| 3436 | } |
| 3437 | if { $shlib_found == 0 } { |
| 3438 | set shlib_found 1 |
| 3439 | if { ([istarget "*-*-mingw*"] |
| 3440 | || [istarget *-*-cygwin*]) } { |
| 3441 | lappend new_options "additional_flags=-Wl,--enable-auto-import" |
| 3442 | } |
| 3443 | if { [test_compiler_info "gcc-*"] || [test_compiler_info "clang-*"] } { |
| 3444 | # Undo debian's change in the default. |
| 3445 | # Put it at the front to not override any user-provided |
| 3446 | # value, and to make sure it appears in front of all the |
| 3447 | # shlibs! |
| 3448 | lappend new_options "early_flags=-Wl,--no-as-needed" |
| 3449 | } |
| 3450 | } |
| 3451 | } elseif { $opt == "shlib_load" } { |
| 3452 | set shlib_load 1 |
| 3453 | } else { |
| 3454 | lappend new_options $opt |
| 3455 | } |
| 3456 | } |
| 3457 | |
| 3458 | # Because we link with libraries using their basename, we may need |
| 3459 | # (depending on the platform) to set a special rpath value, to allow |
| 3460 | # the executable to find the libraries it depends on. |
| 3461 | if { $shlib_load || $shlib_found } { |
| 3462 | if { ([istarget "*-*-mingw*"] |
| 3463 | || [istarget *-*-cygwin*] |
| 3464 | || [istarget *-*-pe*]) } { |
| 3465 | # Do not need anything. |
| 3466 | } elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } { |
| 3467 | lappend new_options "ldflags=-Wl,-rpath,${outdir}" |
| 3468 | } elseif { [istarget arm*-*-symbianelf*] } { |
| 3469 | if { $shlib_load } { |
| 3470 | lappend new_options "libs=-ldl" |
| 3471 | } |
| 3472 | } else { |
| 3473 | if { $shlib_load } { |
| 3474 | lappend new_options "libs=-ldl" |
| 3475 | } |
| 3476 | lappend new_options "ldflags=-Wl,-rpath,\\\$ORIGIN" |
| 3477 | } |
| 3478 | } |
| 3479 | set options $new_options |
| 3480 | |
| 3481 | if [info exists GDB_TESTCASE_OPTIONS] { |
| 3482 | lappend options "additional_flags=$GDB_TESTCASE_OPTIONS" |
| 3483 | } |
| 3484 | verbose "options are $options" |
| 3485 | verbose "source is $source $dest $type $options" |
| 3486 | |
| 3487 | if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init } |
| 3488 | |
| 3489 | if {[target_info exists needs_status_wrapper] && \ |
| 3490 | [target_info needs_status_wrapper] != "0" && \ |
| 3491 | [info exists gdb_wrapper_file]} { |
| 3492 | lappend options "libs=${gdb_wrapper_file}" |
| 3493 | lappend options "ldflags=${gdb_wrapper_flags}" |
| 3494 | } |
| 3495 | |
| 3496 | # Replace the "nowarnings" option with the appropriate additional_flags |
| 3497 | # to disable compiler warnings. |
| 3498 | set nowarnings [lsearch -exact $options nowarnings] |
| 3499 | if {$nowarnings != -1} { |
| 3500 | if [target_info exists gdb,nowarnings_flag] { |
| 3501 | set flag "additional_flags=[target_info gdb,nowarnings_flag]" |
| 3502 | } else { |
| 3503 | set flag "additional_flags=-w" |
| 3504 | } |
| 3505 | set options [lreplace $options $nowarnings $nowarnings $flag] |
| 3506 | } |
| 3507 | |
| 3508 | if { $type == "executable" } { |
| 3509 | if { ([istarget "*-*-mingw*"] |
| 3510 | || [istarget "*-*-*djgpp"] |
| 3511 | || [istarget "*-*-cygwin*"])} { |
| 3512 | # Force output to unbuffered mode, by linking in an object file |
| 3513 | # with a global contructor that calls setvbuf. |
| 3514 | # |
| 3515 | # Compile the special object seperatelly for two reasons: |
| 3516 | # 1) Insulate it from $options. |
| 3517 | # 2) Avoid compiling it for every gdb_compile invocation, |
| 3518 | # which is time consuming, especially if we're remote |
| 3519 | # host testing. |
| 3520 | # |
| 3521 | if { $gdb_saved_set_unbuffered_mode_obj == "" } { |
| 3522 | verbose "compiling gdb_saved_set_unbuffered_obj" |
| 3523 | set unbuf_src ${srcdir}/lib/set_unbuffered_mode.c |
| 3524 | set unbuf_obj ${objdir}/set_unbuffered_mode.o |
| 3525 | |
| 3526 | set result [gdb_compile "${unbuf_src}" "${unbuf_obj}" object {nowarnings}] |
| 3527 | if { $result != "" } { |
| 3528 | return $result |
| 3529 | } |
| 3530 | if {[is_remote host]} { |
| 3531 | set gdb_saved_set_unbuffered_mode_obj set_unbuffered_mode_saved.o |
| 3532 | } else { |
| 3533 | set gdb_saved_set_unbuffered_mode_obj ${objdir}/set_unbuffered_mode_saved.o |
| 3534 | } |
| 3535 | # Link a copy of the output object, because the |
| 3536 | # original may be automatically deleted. |
| 3537 | remote_download host $unbuf_obj $gdb_saved_set_unbuffered_mode_obj |
| 3538 | } else { |
| 3539 | verbose "gdb_saved_set_unbuffered_obj already compiled" |
| 3540 | } |
| 3541 | |
| 3542 | # Rely on the internal knowledge that the global ctors are ran in |
| 3543 | # reverse link order. In that case, we can use ldflags to |
| 3544 | # avoid copying the object file to the host multiple |
| 3545 | # times. |
| 3546 | # This object can only be added if standard libraries are |
| 3547 | # used. Thus, we need to disable it if -nostdlib option is used |
| 3548 | if {[lsearch -regexp $options "-nostdlib"] < 0 } { |
| 3549 | lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj" |
| 3550 | } |
| 3551 | } |
| 3552 | } |
| 3553 | |
| 3554 | set result [target_compile $source $dest $type $options] |
| 3555 | |
| 3556 | # Prune uninteresting compiler (and linker) output. |
| 3557 | regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result |
| 3558 | |
| 3559 | regsub "\[\r\n\]*$" "$result" "" result |
| 3560 | regsub "^\[\r\n\]*" "$result" "" result |
| 3561 | |
| 3562 | if {[lsearch $options quiet] < 0} { |
| 3563 | # We shall update this on a per language basis, to avoid |
| 3564 | # changing the entire testsuite in one go. |
| 3565 | if {[lsearch $options f77] >= 0} { |
| 3566 | gdb_compile_test $source $result |
| 3567 | } elseif { $result != "" } { |
| 3568 | clone_output "gdb compile failed, $result" |
| 3569 | } |
| 3570 | } |
| 3571 | return $result |
| 3572 | } |
| 3573 | |
| 3574 | |
| 3575 | # This is just like gdb_compile, above, except that it tries compiling |
| 3576 | # against several different thread libraries, to see which one this |
| 3577 | # system has. |
| 3578 | proc gdb_compile_pthreads {source dest type options} { |
| 3579 | set built_binfile 0 |
| 3580 | set why_msg "unrecognized error" |
| 3581 | foreach lib {-lpthreads -lpthread -lthread ""} { |
| 3582 | # This kind of wipes out whatever libs the caller may have |
| 3583 | # set. Or maybe theirs will override ours. How infelicitous. |
| 3584 | set options_with_lib [concat $options [list libs=$lib quiet]] |
| 3585 | set ccout [gdb_compile $source $dest $type $options_with_lib] |
| 3586 | switch -regexp -- $ccout { |
| 3587 | ".*no posix threads support.*" { |
| 3588 | set why_msg "missing threads include file" |
| 3589 | break |
| 3590 | } |
| 3591 | ".*cannot open -lpthread.*" { |
| 3592 | set why_msg "missing runtime threads library" |
| 3593 | } |
| 3594 | ".*Can't find library for -lpthread.*" { |
| 3595 | set why_msg "missing runtime threads library" |
| 3596 | } |
| 3597 | {^$} { |
| 3598 | pass "successfully compiled posix threads test case" |
| 3599 | set built_binfile 1 |
| 3600 | break |
| 3601 | } |
| 3602 | } |
| 3603 | } |
| 3604 | if {!$built_binfile} { |
| 3605 | unsupported "Couldn't compile [file tail $source]: ${why_msg}" |
| 3606 | return -1 |
| 3607 | } |
| 3608 | } |
| 3609 | |
| 3610 | # Build a shared library from SOURCES. |
| 3611 | |
| 3612 | proc gdb_compile_shlib {sources dest options} { |
| 3613 | set obj_options $options |
| 3614 | |
| 3615 | set info_options "" |
| 3616 | if { [lsearch -exact $options "c++"] >= 0 } { |
| 3617 | set info_options "c++" |
| 3618 | } |
| 3619 | if [get_compiler_info ${info_options}] { |
| 3620 | return -1 |
| 3621 | } |
| 3622 | |
| 3623 | switch -glob [test_compiler_info] { |
| 3624 | "xlc-*" { |
| 3625 | lappend obj_options "additional_flags=-qpic" |
| 3626 | } |
| 3627 | "clang-*" { |
| 3628 | if { !([istarget "*-*-cygwin*"] |
| 3629 | || [istarget "*-*-mingw*"]) } { |
| 3630 | lappend obj_options "additional_flags=-fpic" |
| 3631 | } |
| 3632 | } |
| 3633 | "gcc-*" { |
| 3634 | if { !([istarget "powerpc*-*-aix*"] |
| 3635 | || [istarget "rs6000*-*-aix*"] |
| 3636 | || [istarget "*-*-cygwin*"] |
| 3637 | || [istarget "*-*-mingw*"] |
| 3638 | || [istarget "*-*-pe*"]) } { |
| 3639 | lappend obj_options "additional_flags=-fpic" |
| 3640 | } |
| 3641 | } |
| 3642 | "icc-*" { |
| 3643 | lappend obj_options "additional_flags=-fpic" |
| 3644 | } |
| 3645 | default { |
| 3646 | # don't know what the compiler is... |
| 3647 | } |
| 3648 | } |
| 3649 | |
| 3650 | set outdir [file dirname $dest] |
| 3651 | set objects "" |
| 3652 | foreach source $sources { |
| 3653 | set sourcebase [file tail $source] |
| 3654 | if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} { |
| 3655 | return -1 |
| 3656 | } |
| 3657 | lappend objects ${outdir}/${sourcebase}.o |
| 3658 | } |
| 3659 | |
| 3660 | set link_options $options |
| 3661 | if [test_compiler_info "xlc-*"] { |
| 3662 | lappend link_options "additional_flags=-qmkshrobj" |
| 3663 | } else { |
| 3664 | lappend link_options "additional_flags=-shared" |
| 3665 | |
| 3666 | if { ([istarget "*-*-mingw*"] |
| 3667 | || [istarget *-*-cygwin*] |
| 3668 | || [istarget *-*-pe*]) } { |
| 3669 | if { [is_remote host] } { |
| 3670 | set name [file tail ${dest}] |
| 3671 | } else { |
| 3672 | set name ${dest} |
| 3673 | } |
| 3674 | lappend link_options "additional_flags=-Wl,--out-implib,${name}.a" |
| 3675 | } else { |
| 3676 | # Set the soname of the library. This causes the linker on ELF |
| 3677 | # systems to create the DT_NEEDED entry in the executable referring |
| 3678 | # to the soname of the library, and not its absolute path. This |
| 3679 | # (using the absolute path) would be problem when testing on a |
| 3680 | # remote target. |
| 3681 | # |
| 3682 | # In conjunction with setting the soname, we add the special |
| 3683 | # rpath=$ORIGIN value when building the executable, so that it's |
| 3684 | # able to find the library in its own directory. |
| 3685 | set destbase [file tail $dest] |
| 3686 | lappend link_options "additional_flags=-Wl,-soname,$destbase" |
| 3687 | } |
| 3688 | } |
| 3689 | if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} { |
| 3690 | return -1 |
| 3691 | } |
| 3692 | if { [is_remote host] |
| 3693 | && ([istarget "*-*-mingw*"] |
| 3694 | || [istarget *-*-cygwin*] |
| 3695 | || [istarget *-*-pe*]) } { |
| 3696 | set dest_tail_name [file tail ${dest}] |
| 3697 | remote_upload host $dest_tail_name.a ${dest}.a |
| 3698 | remote_file host delete $dest_tail_name.a |
| 3699 | } |
| 3700 | |
| 3701 | return "" |
| 3702 | } |
| 3703 | |
| 3704 | # This is just like gdb_compile_shlib, above, except that it tries compiling |
| 3705 | # against several different thread libraries, to see which one this |
| 3706 | # system has. |
| 3707 | proc gdb_compile_shlib_pthreads {sources dest options} { |
| 3708 | set built_binfile 0 |
| 3709 | set why_msg "unrecognized error" |
| 3710 | foreach lib {-lpthreads -lpthread -lthread ""} { |
| 3711 | # This kind of wipes out whatever libs the caller may have |
| 3712 | # set. Or maybe theirs will override ours. How infelicitous. |
| 3713 | set options_with_lib [concat $options [list libs=$lib quiet]] |
| 3714 | set ccout [gdb_compile_shlib $sources $dest $options_with_lib] |
| 3715 | switch -regexp -- $ccout { |
| 3716 | ".*no posix threads support.*" { |
| 3717 | set why_msg "missing threads include file" |
| 3718 | break |
| 3719 | } |
| 3720 | ".*cannot open -lpthread.*" { |
| 3721 | set why_msg "missing runtime threads library" |
| 3722 | } |
| 3723 | ".*Can't find library for -lpthread.*" { |
| 3724 | set why_msg "missing runtime threads library" |
| 3725 | } |
| 3726 | {^$} { |
| 3727 | pass "successfully compiled posix threads test case" |
| 3728 | set built_binfile 1 |
| 3729 | break |
| 3730 | } |
| 3731 | } |
| 3732 | } |
| 3733 | if {!$built_binfile} { |
| 3734 | unsupported "Couldn't compile $sources: ${why_msg}" |
| 3735 | return -1 |
| 3736 | } |
| 3737 | } |
| 3738 | |
| 3739 | # This is just like gdb_compile_pthreads, above, except that we always add the |
| 3740 | # objc library for compiling Objective-C programs |
| 3741 | proc gdb_compile_objc {source dest type options} { |
| 3742 | set built_binfile 0 |
| 3743 | set why_msg "unrecognized error" |
| 3744 | foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} { |
| 3745 | # This kind of wipes out whatever libs the caller may have |
| 3746 | # set. Or maybe theirs will override ours. How infelicitous. |
| 3747 | if { $lib == "solaris" } { |
| 3748 | set lib "-lpthread -lposix4" |
| 3749 | } |
| 3750 | if { $lib != "-lobjc" } { |
| 3751 | set lib "-lobjc $lib" |
| 3752 | } |
| 3753 | set options_with_lib [concat $options [list libs=$lib quiet]] |
| 3754 | set ccout [gdb_compile $source $dest $type $options_with_lib] |
| 3755 | switch -regexp -- $ccout { |
| 3756 | ".*no posix threads support.*" { |
| 3757 | set why_msg "missing threads include file" |
| 3758 | break |
| 3759 | } |
| 3760 | ".*cannot open -lpthread.*" { |
| 3761 | set why_msg "missing runtime threads library" |
| 3762 | } |
| 3763 | ".*Can't find library for -lpthread.*" { |
| 3764 | set why_msg "missing runtime threads library" |
| 3765 | } |
| 3766 | {^$} { |
| 3767 | pass "successfully compiled objc with posix threads test case" |
| 3768 | set built_binfile 1 |
| 3769 | break |
| 3770 | } |
| 3771 | } |
| 3772 | } |
| 3773 | if {!$built_binfile} { |
| 3774 | unsupported "Couldn't compile [file tail $source]: ${why_msg}" |
| 3775 | return -1 |
| 3776 | } |
| 3777 | } |
| 3778 | |
| 3779 | proc send_gdb { string } { |
| 3780 | global suppress_flag |
| 3781 | if { $suppress_flag } { |
| 3782 | return "suppressed" |
| 3783 | } |
| 3784 | return [remote_send host "$string"] |
| 3785 | } |
| 3786 | |
| 3787 | # Send STRING to the inferior's terminal. |
| 3788 | |
| 3789 | proc send_inferior { string } { |
| 3790 | global inferior_spawn_id |
| 3791 | |
| 3792 | if {[catch "send -i $inferior_spawn_id -- \$string" errorInfo]} { |
| 3793 | return "$errorInfo" |
| 3794 | } else { |
| 3795 | return "" |
| 3796 | } |
| 3797 | } |
| 3798 | |
| 3799 | # |
| 3800 | # |
| 3801 | |
| 3802 | proc gdb_expect { args } { |
| 3803 | if { [llength $args] == 2 && [lindex $args 0] != "-re" } { |
| 3804 | set atimeout [lindex $args 0] |
| 3805 | set expcode [list [lindex $args 1]] |
| 3806 | } else { |
| 3807 | set expcode $args |
| 3808 | } |
| 3809 | |
| 3810 | # A timeout argument takes precedence, otherwise of all the timeouts |
| 3811 | # select the largest. |
| 3812 | if [info exists atimeout] { |
| 3813 | set tmt $atimeout |
| 3814 | } else { |
| 3815 | set tmt [get_largest_timeout] |
| 3816 | } |
| 3817 | |
| 3818 | global suppress_flag |
| 3819 | global remote_suppress_flag |
| 3820 | if [info exists remote_suppress_flag] { |
| 3821 | set old_val $remote_suppress_flag |
| 3822 | } |
| 3823 | if [info exists suppress_flag] { |
| 3824 | if { $suppress_flag } { |
| 3825 | set remote_suppress_flag 1 |
| 3826 | } |
| 3827 | } |
| 3828 | set code [catch \ |
| 3829 | {uplevel remote_expect host $tmt $expcode} string] |
| 3830 | if [info exists old_val] { |
| 3831 | set remote_suppress_flag $old_val |
| 3832 | } else { |
| 3833 | if [info exists remote_suppress_flag] { |
| 3834 | unset remote_suppress_flag |
| 3835 | } |
| 3836 | } |
| 3837 | |
| 3838 | if {$code == 1} { |
| 3839 | global errorInfo errorCode |
| 3840 | |
| 3841 | return -code error -errorinfo $errorInfo -errorcode $errorCode $string |
| 3842 | } else { |
| 3843 | return -code $code $string |
| 3844 | } |
| 3845 | } |
| 3846 | |
| 3847 | # gdb_expect_list TEST SENTINEL LIST -- expect a sequence of outputs |
| 3848 | # |
| 3849 | # Check for long sequence of output by parts. |
| 3850 | # TEST: is the test message to be printed with the test success/fail. |
| 3851 | # SENTINEL: Is the terminal pattern indicating that output has finished. |
| 3852 | # LIST: is the sequence of outputs to match. |
| 3853 | # If the sentinel is recognized early, it is considered an error. |
| 3854 | # |
| 3855 | # Returns: |
| 3856 | # 1 if the test failed, |
| 3857 | # 0 if the test passes, |
| 3858 | # -1 if there was an internal error. |
| 3859 | |
| 3860 | proc gdb_expect_list {test sentinel list} { |
| 3861 | global gdb_prompt |
| 3862 | global suppress_flag |
| 3863 | set index 0 |
| 3864 | set ok 1 |
| 3865 | if { $suppress_flag } { |
| 3866 | set ok 0 |
| 3867 | unresolved "${test}" |
| 3868 | } |
| 3869 | while { ${index} < [llength ${list}] } { |
| 3870 | set pattern [lindex ${list} ${index}] |
| 3871 | set index [expr ${index} + 1] |
| 3872 | verbose -log "gdb_expect_list pattern: /$pattern/" 2 |
| 3873 | if { ${index} == [llength ${list}] } { |
| 3874 | if { ${ok} } { |
| 3875 | gdb_expect { |
| 3876 | -re "${pattern}${sentinel}" { |
| 3877 | # pass "${test}, pattern ${index} + sentinel" |
| 3878 | } |
| 3879 | -re "${sentinel}" { |
| 3880 | fail "${test} (pattern ${index} + sentinel)" |
| 3881 | set ok 0 |
| 3882 | } |
| 3883 | -re ".*A problem internal to GDB has been detected" { |
| 3884 | fail "${test} (GDB internal error)" |
| 3885 | set ok 0 |
| 3886 | gdb_internal_error_resync |
| 3887 | } |
| 3888 | timeout { |
| 3889 | fail "${test} (pattern ${index} + sentinel) (timeout)" |
| 3890 | set ok 0 |
| 3891 | } |
| 3892 | } |
| 3893 | } else { |
| 3894 | # unresolved "${test}, pattern ${index} + sentinel" |
| 3895 | } |
| 3896 | } else { |
| 3897 | if { ${ok} } { |
| 3898 | gdb_expect { |
| 3899 | -re "${pattern}" { |
| 3900 | # pass "${test}, pattern ${index}" |
| 3901 | } |
| 3902 | -re "${sentinel}" { |
| 3903 | fail "${test} (pattern ${index})" |
| 3904 | set ok 0 |
| 3905 | } |
| 3906 | -re ".*A problem internal to GDB has been detected" { |
| 3907 | fail "${test} (GDB internal error)" |
| 3908 | set ok 0 |
| 3909 | gdb_internal_error_resync |
| 3910 | } |
| 3911 | timeout { |
| 3912 | fail "${test} (pattern ${index}) (timeout)" |
| 3913 | set ok 0 |
| 3914 | } |
| 3915 | } |
| 3916 | } else { |
| 3917 | # unresolved "${test}, pattern ${index}" |
| 3918 | } |
| 3919 | } |
| 3920 | } |
| 3921 | if { ${ok} } { |
| 3922 | pass "${test}" |
| 3923 | return 0 |
| 3924 | } else { |
| 3925 | return 1 |
| 3926 | } |
| 3927 | } |
| 3928 | |
| 3929 | # |
| 3930 | # |
| 3931 | proc gdb_suppress_entire_file { reason } { |
| 3932 | global suppress_flag |
| 3933 | |
| 3934 | warning "$reason\n" |
| 3935 | set suppress_flag -1 |
| 3936 | } |
| 3937 | |
| 3938 | # |
| 3939 | # Set suppress_flag, which will cause all subsequent calls to send_gdb and |
| 3940 | # gdb_expect to fail immediately (until the next call to |
| 3941 | # gdb_stop_suppressing_tests). |
| 3942 | # |
| 3943 | proc gdb_suppress_tests { args } { |
| 3944 | global suppress_flag |
| 3945 | |
| 3946 | return; # fnf - disable pending review of results where |
| 3947 | # testsuite ran better without this |
| 3948 | incr suppress_flag |
| 3949 | |
| 3950 | if { $suppress_flag == 1 } { |
| 3951 | if { [llength $args] > 0 } { |
| 3952 | warning "[lindex $args 0]\n" |
| 3953 | } else { |
| 3954 | warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n" |
| 3955 | } |
| 3956 | } |
| 3957 | } |
| 3958 | |
| 3959 | # |
| 3960 | # Clear suppress_flag. |
| 3961 | # |
| 3962 | proc gdb_stop_suppressing_tests { } { |
| 3963 | global suppress_flag |
| 3964 | |
| 3965 | if [info exists suppress_flag] { |
| 3966 | if { $suppress_flag > 0 } { |
| 3967 | set suppress_flag 0 |
| 3968 | clone_output "Tests restarted.\n" |
| 3969 | } |
| 3970 | } else { |
| 3971 | set suppress_flag 0 |
| 3972 | } |
| 3973 | } |
| 3974 | |
| 3975 | proc gdb_clear_suppressed { } { |
| 3976 | global suppress_flag |
| 3977 | |
| 3978 | set suppress_flag 0 |
| 3979 | } |
| 3980 | |
| 3981 | # Spawn the gdb process. |
| 3982 | # |
| 3983 | # This doesn't expect any output or do any other initialization, |
| 3984 | # leaving those to the caller. |
| 3985 | # |
| 3986 | # Overridable function -- you can override this function in your |
| 3987 | # baseboard file. |
| 3988 | |
| 3989 | proc gdb_spawn { } { |
| 3990 | default_gdb_spawn |
| 3991 | } |
| 3992 | |
| 3993 | # Spawn GDB with CMDLINE_FLAGS appended to the GDBFLAGS global. |
| 3994 | |
| 3995 | proc gdb_spawn_with_cmdline_opts { cmdline_flags } { |
| 3996 | global GDBFLAGS |
| 3997 | |
| 3998 | set saved_gdbflags $GDBFLAGS |
| 3999 | |
| 4000 | if {$GDBFLAGS != ""} { |
| 4001 | append GDBFLAGS " " |
| 4002 | } |
| 4003 | append GDBFLAGS $cmdline_flags |
| 4004 | |
| 4005 | set res [gdb_spawn] |
| 4006 | |
| 4007 | set GDBFLAGS $saved_gdbflags |
| 4008 | |
| 4009 | return $res |
| 4010 | } |
| 4011 | |
| 4012 | # Start gdb running, wait for prompt, and disable the pagers. |
| 4013 | |
| 4014 | # Overridable function -- you can override this function in your |
| 4015 | # baseboard file. |
| 4016 | |
| 4017 | proc gdb_start { } { |
| 4018 | default_gdb_start |
| 4019 | } |
| 4020 | |
| 4021 | proc gdb_exit { } { |
| 4022 | catch default_gdb_exit |
| 4023 | } |
| 4024 | |
| 4025 | # Return true if we can spawn a program on the target and attach to |
| 4026 | # it. |
| 4027 | |
| 4028 | proc can_spawn_for_attach { } { |
| 4029 | # We use exp_pid to get the inferior's pid, assuming that gives |
| 4030 | # back the pid of the program. On remote boards, that would give |
| 4031 | # us instead the PID of e.g., the ssh client, etc. |
| 4032 | if [is_remote target] then { |
| 4033 | return 0 |
| 4034 | } |
| 4035 | |
| 4036 | # The "attach" command doesn't make sense when the target is |
| 4037 | # stub-like, where GDB finds the program already started on |
| 4038 | # initial connection. |
| 4039 | if {[target_info exists use_gdb_stub]} { |
| 4040 | return 0 |
| 4041 | } |
| 4042 | |
| 4043 | # Assume yes. |
| 4044 | return 1 |
| 4045 | } |
| 4046 | |
| 4047 | # Kill a progress previously started with spawn_wait_for_attach, and |
| 4048 | # reap its wait status. PROC_SPAWN_ID is the spawn id associated with |
| 4049 | # the process. |
| 4050 | |
| 4051 | proc kill_wait_spawned_process { proc_spawn_id } { |
| 4052 | set pid [exp_pid -i $proc_spawn_id] |
| 4053 | |
| 4054 | verbose -log "killing ${pid}" |
| 4055 | remote_exec build "kill -9 ${pid}" |
| 4056 | |
| 4057 | verbose -log "closing ${proc_spawn_id}" |
| 4058 | catch "close -i $proc_spawn_id" |
| 4059 | verbose -log "waiting for ${proc_spawn_id}" |
| 4060 | |
| 4061 | # If somehow GDB ends up still attached to the process here, a |
| 4062 | # blocking wait hangs until gdb is killed (or until gdb / the |
| 4063 | # ptracer reaps the exit status too, but that won't happen because |
| 4064 | # something went wrong.) Passing -nowait makes expect tell Tcl to |
| 4065 | # wait for the PID in the background. That's fine because we |
| 4066 | # don't care about the exit status. */ |
| 4067 | wait -nowait -i $proc_spawn_id |
| 4068 | } |
| 4069 | |
| 4070 | # Returns the process id corresponding to the given spawn id. |
| 4071 | |
| 4072 | proc spawn_id_get_pid { spawn_id } { |
| 4073 | set testpid [exp_pid -i $spawn_id] |
| 4074 | |
| 4075 | if { [istarget "*-*-cygwin*"] } { |
| 4076 | # testpid is the Cygwin PID, GDB uses the Windows PID, which |
| 4077 | # might be different due to the way fork/exec works. |
| 4078 | set testpid [ exec ps -e | gawk "{ if (\$1 == $testpid) print \$4; }" ] |
| 4079 | } |
| 4080 | |
| 4081 | return $testpid |
| 4082 | } |
| 4083 | |
| 4084 | # Start a set of programs running and then wait for a bit, to be sure |
| 4085 | # that they can be attached to. Return a list of processes spawn IDs, |
| 4086 | # one element for each process spawned. It's a test error to call |
| 4087 | # this when [can_spawn_for_attach] is false. |
| 4088 | |
| 4089 | proc spawn_wait_for_attach { executable_list } { |
| 4090 | set spawn_id_list {} |
| 4091 | |
| 4092 | if ![can_spawn_for_attach] { |
| 4093 | # The caller should have checked can_spawn_for_attach itself |
| 4094 | # before getting here. |
| 4095 | error "can't spawn for attach with this target/board" |
| 4096 | } |
| 4097 | |
| 4098 | foreach {executable} $executable_list { |
| 4099 | # Note we use Expect's spawn, not Tcl's exec, because with |
| 4100 | # spawn we control when to wait for/reap the process. That |
| 4101 | # allows killing the process by PID without being subject to |
| 4102 | # pid-reuse races. |
| 4103 | lappend spawn_id_list [remote_spawn target $executable] |
| 4104 | } |
| 4105 | |
| 4106 | sleep 2 |
| 4107 | |
| 4108 | return $spawn_id_list |
| 4109 | } |
| 4110 | |
| 4111 | # |
| 4112 | # gdb_load_cmd -- load a file into the debugger. |
| 4113 | # ARGS - additional args to load command. |
| 4114 | # return a -1 if anything goes wrong. |
| 4115 | # |
| 4116 | proc gdb_load_cmd { args } { |
| 4117 | global gdb_prompt |
| 4118 | |
| 4119 | if [target_info exists gdb_load_timeout] { |
| 4120 | set loadtimeout [target_info gdb_load_timeout] |
| 4121 | } else { |
| 4122 | set loadtimeout 1600 |
| 4123 | } |
| 4124 | send_gdb "load $args\n" |
| 4125 | verbose "Timeout is now $loadtimeout seconds" 2 |
| 4126 | gdb_expect $loadtimeout { |
| 4127 | -re "Loading section\[^\r\]*\r\n" { |
| 4128 | exp_continue |
| 4129 | } |
| 4130 | -re "Start address\[\r\]*\r\n" { |
| 4131 | exp_continue |
| 4132 | } |
| 4133 | -re "Transfer rate\[\r\]*\r\n" { |
| 4134 | exp_continue |
| 4135 | } |
| 4136 | -re "Memory access error\[^\r\]*\r\n" { |
| 4137 | perror "Failed to load program" |
| 4138 | return -1 |
| 4139 | } |
| 4140 | -re "$gdb_prompt $" { |
| 4141 | return 0 |
| 4142 | } |
| 4143 | -re "(.*)\r\n$gdb_prompt " { |
| 4144 | perror "Unexpected reponse from 'load' -- $expect_out(1,string)" |
| 4145 | return -1 |
| 4146 | } |
| 4147 | timeout { |
| 4148 | perror "Timed out trying to load $args." |
| 4149 | return -1 |
| 4150 | } |
| 4151 | } |
| 4152 | return -1 |
| 4153 | } |
| 4154 | |
| 4155 | # Invoke "gcore". CORE is the name of the core file to write. TEST |
| 4156 | # is the name of the test case. This will return 1 if the core file |
| 4157 | # was created, 0 otherwise. If this fails to make a core file because |
| 4158 | # this configuration of gdb does not support making core files, it |
| 4159 | # will call "unsupported", not "fail". However, if this fails to make |
| 4160 | # a core file for some other reason, then it will call "fail". |
| 4161 | |
| 4162 | proc gdb_gcore_cmd {core test} { |
| 4163 | global gdb_prompt |
| 4164 | |
| 4165 | set result 0 |
| 4166 | gdb_test_multiple "gcore $core" $test { |
| 4167 | -re "Saved corefile .*\[\r\n\]+$gdb_prompt $" { |
| 4168 | pass $test |
| 4169 | set result 1 |
| 4170 | } |
| 4171 | -re "(?:Can't create a corefile|Target does not support core file generation\\.)\[\r\n\]+$gdb_prompt $" { |
| 4172 | unsupported $test |
| 4173 | } |
| 4174 | } |
| 4175 | |
| 4176 | return $result |
| 4177 | } |
| 4178 | |
| 4179 | # Load core file CORE. TEST is the name of the test case. |
| 4180 | # This will record a pass/fail for loading the core file. |
| 4181 | # Returns: |
| 4182 | # 1 - core file is successfully loaded |
| 4183 | # 0 - core file loaded but has a non fatal error |
| 4184 | # -1 - core file failed to load |
| 4185 | |
| 4186 | proc gdb_core_cmd { core test } { |
| 4187 | global gdb_prompt |
| 4188 | |
| 4189 | gdb_test_multiple "core $core" "$test" { |
| 4190 | -re "\\\[Thread debugging using \[^ \r\n\]* enabled\\\]\r\n" { |
| 4191 | exp_continue |
| 4192 | } |
| 4193 | -re " is not a core dump:.*\r\n$gdb_prompt $" { |
| 4194 | fail "$test (bad file format)" |
| 4195 | return -1 |
| 4196 | } |
| 4197 | -re ": No such file or directory.*\r\n$gdb_prompt $" { |
| 4198 | fail "$test (file not found)" |
| 4199 | return -1 |
| 4200 | } |
| 4201 | -re "Couldn't find .* registers in core file.*\r\n$gdb_prompt $" { |
| 4202 | fail "$test (incomplete note section)" |
| 4203 | return 0 |
| 4204 | } |
| 4205 | -re "Core was generated by .*\r\n$gdb_prompt $" { |
| 4206 | pass "$test" |
| 4207 | return 1 |
| 4208 | } |
| 4209 | -re ".*$gdb_prompt $" { |
| 4210 | fail "$test" |
| 4211 | return -1 |
| 4212 | } |
| 4213 | timeout { |
| 4214 | fail "$test (timeout)" |
| 4215 | return -1 |
| 4216 | } |
| 4217 | } |
| 4218 | fail "unsupported output from 'core' command" |
| 4219 | return -1 |
| 4220 | } |
| 4221 | |
| 4222 | # Return the filename to download to the target and load on the target |
| 4223 | # for this shared library. Normally just LIBNAME, unless shared libraries |
| 4224 | # for this target have separate link and load images. |
| 4225 | |
| 4226 | proc shlib_target_file { libname } { |
| 4227 | return $libname |
| 4228 | } |
| 4229 | |
| 4230 | # Return the filename GDB will load symbols from when debugging this |
| 4231 | # shared library. Normally just LIBNAME, unless shared libraries for |
| 4232 | # this target have separate link and load images. |
| 4233 | |
| 4234 | proc shlib_symbol_file { libname } { |
| 4235 | return $libname |
| 4236 | } |
| 4237 | |
| 4238 | # Return the filename to download to the target and load for this |
| 4239 | # executable. Normally just BINFILE unless it is renamed to something |
| 4240 | # else for this target. |
| 4241 | |
| 4242 | proc exec_target_file { binfile } { |
| 4243 | return $binfile |
| 4244 | } |
| 4245 | |
| 4246 | # Return the filename GDB will load symbols from when debugging this |
| 4247 | # executable. Normally just BINFILE unless executables for this target |
| 4248 | # have separate files for symbols. |
| 4249 | |
| 4250 | proc exec_symbol_file { binfile } { |
| 4251 | return $binfile |
| 4252 | } |
| 4253 | |
| 4254 | # Rename the executable file. Normally this is just BINFILE1 being renamed |
| 4255 | # to BINFILE2, but some targets require multiple binary files. |
| 4256 | proc gdb_rename_execfile { binfile1 binfile2 } { |
| 4257 | file rename -force [exec_target_file ${binfile1}] \ |
| 4258 | [exec_target_file ${binfile2}] |
| 4259 | if { [exec_target_file ${binfile1}] != [exec_symbol_file ${binfile1}] } { |
| 4260 | file rename -force [exec_symbol_file ${binfile1}] \ |
| 4261 | [exec_symbol_file ${binfile2}] |
| 4262 | } |
| 4263 | } |
| 4264 | |
| 4265 | # "Touch" the executable file to update the date. Normally this is just |
| 4266 | # BINFILE, but some targets require multiple files. |
| 4267 | proc gdb_touch_execfile { binfile } { |
| 4268 | set time [clock seconds] |
| 4269 | file mtime [exec_target_file ${binfile}] $time |
| 4270 | if { [exec_target_file ${binfile}] != [exec_symbol_file ${binfile}] } { |
| 4271 | file mtime [exec_symbol_file ${binfile}] $time |
| 4272 | } |
| 4273 | } |
| 4274 | |
| 4275 | # Like remote_download but provides a gdb-specific behavior. |
| 4276 | # |
| 4277 | # If the destination board is remote, the local file FROMFILE is transferred as |
| 4278 | # usual with remote_download to TOFILE on the remote board. The destination |
| 4279 | # filename is added to the CLEANFILES global, so it can be cleaned up at the |
| 4280 | # end of the test. |
| 4281 | # |
| 4282 | # If the destination board is local, the destination path TOFILE is passed |
| 4283 | # through standard_output_file, and FROMFILE is copied there. |
| 4284 | # |
| 4285 | # In both cases, if TOFILE is omitted, it defaults to the [file tail] of |
| 4286 | # FROMFILE. |
| 4287 | |
| 4288 | proc gdb_remote_download {dest fromfile {tofile {}}} { |
| 4289 | # If TOFILE is not given, default to the same filename as FROMFILE. |
| 4290 | if {[string length $tofile] == 0} { |
| 4291 | set tofile [file tail $fromfile] |
| 4292 | } |
| 4293 | |
| 4294 | if {[is_remote $dest]} { |
| 4295 | # When the DEST is remote, we simply send the file to DEST. |
| 4296 | global cleanfiles |
| 4297 | |
| 4298 | set destname [remote_download $dest $fromfile $tofile] |
| 4299 | lappend cleanfiles $destname |
| 4300 | |
| 4301 | return $destname |
| 4302 | } else { |
| 4303 | # When the DEST is local, we copy the file to the test directory (where |
| 4304 | # the executable is). |
| 4305 | # |
| 4306 | # Note that we pass TOFILE through standard_output_file, regardless of |
| 4307 | # whether it is absolute or relative, because we don't want the tests |
| 4308 | # to be able to write outside their standard output directory. |
| 4309 | |
| 4310 | set tofile [standard_output_file $tofile] |
| 4311 | |
| 4312 | file copy -force $fromfile $tofile |
| 4313 | |
| 4314 | return $tofile |
| 4315 | } |
| 4316 | } |
| 4317 | |
| 4318 | # gdb_load_shlib LIB... |
| 4319 | # |
| 4320 | # Copy the listed library to the target. |
| 4321 | |
| 4322 | proc gdb_load_shlib { file } { |
| 4323 | set dest [gdb_remote_download target [shlib_target_file $file]] |
| 4324 | |
| 4325 | if {[is_remote target]} { |
| 4326 | # If the target is remote, we need to tell gdb where to find the |
| 4327 | # libraries. |
| 4328 | # |
| 4329 | # We could set this even when not testing remotely, but a user |
| 4330 | # generally won't set it unless necessary. In order to make the tests |
| 4331 | # more like the real-life scenarios, we don't set it for local testing. |
| 4332 | gdb_test "set solib-search-path [file dirname $file]" "" "" |
| 4333 | } |
| 4334 | |
| 4335 | return $dest |
| 4336 | } |
| 4337 | |
| 4338 | # |
| 4339 | # gdb_load -- load a file into the debugger. Specifying no file |
| 4340 | # defaults to the executable currently being debugged. |
| 4341 | # The return value is 0 for success, -1 for failure. |
| 4342 | # Many files in config/*.exp override this procedure. |
| 4343 | # |
| 4344 | proc gdb_load { arg } { |
| 4345 | if { $arg != "" } { |
| 4346 | return [gdb_file_cmd $arg] |
| 4347 | } |
| 4348 | return 0 |
| 4349 | } |
| 4350 | |
| 4351 | # gdb_reload -- load a file into the target. Called before "running", |
| 4352 | # either the first time or after already starting the program once, |
| 4353 | # for remote targets. Most files that override gdb_load should now |
| 4354 | # override this instead. |
| 4355 | |
| 4356 | proc gdb_reload { } { |
| 4357 | # For the benefit of existing configurations, default to gdb_load. |
| 4358 | # Specifying no file defaults to the executable currently being |
| 4359 | # debugged. |
| 4360 | return [gdb_load ""] |
| 4361 | } |
| 4362 | |
| 4363 | proc gdb_continue { function } { |
| 4364 | global decimal |
| 4365 | |
| 4366 | return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"] |
| 4367 | } |
| 4368 | |
| 4369 | proc default_gdb_init { test_file_name } { |
| 4370 | global gdb_wrapper_initialized |
| 4371 | global gdb_wrapper_target |
| 4372 | global gdb_test_file_name |
| 4373 | global cleanfiles |
| 4374 | global pf_prefix |
| 4375 | |
| 4376 | set cleanfiles {} |
| 4377 | |
| 4378 | gdb_clear_suppressed |
| 4379 | |
| 4380 | set gdb_test_file_name [file rootname [file tail $test_file_name]] |
| 4381 | |
| 4382 | # Make sure that the wrapper is rebuilt |
| 4383 | # with the appropriate multilib option. |
| 4384 | if { $gdb_wrapper_target != [current_target_name] } { |
| 4385 | set gdb_wrapper_initialized 0 |
| 4386 | } |
| 4387 | |
| 4388 | # Unlike most tests, we have a small number of tests that generate |
| 4389 | # a very large amount of output. We therefore increase the expect |
| 4390 | # buffer size to be able to contain the entire test output. This |
| 4391 | # is especially needed by gdb.base/info-macros.exp. |
| 4392 | match_max -d 65536 |
| 4393 | # Also set this value for the currently running GDB. |
| 4394 | match_max [match_max -d] |
| 4395 | |
| 4396 | # We want to add the name of the TCL testcase to the PASS/FAIL messages. |
| 4397 | set pf_prefix "[file tail [file dirname $test_file_name]]/[file tail $test_file_name]:" |
| 4398 | |
| 4399 | global gdb_prompt |
| 4400 | if [target_info exists gdb_prompt] { |
| 4401 | set gdb_prompt [target_info gdb_prompt] |
| 4402 | } else { |
| 4403 | set gdb_prompt "\\(gdb\\)" |
| 4404 | } |
| 4405 | global use_gdb_stub |
| 4406 | if [info exists use_gdb_stub] { |
| 4407 | unset use_gdb_stub |
| 4408 | } |
| 4409 | } |
| 4410 | |
| 4411 | # Return a path using GDB_PARALLEL. |
| 4412 | # ARGS is a list of path elements to append to "$objdir/$GDB_PARALLEL". |
| 4413 | # GDB_PARALLEL must be defined, the caller must check. |
| 4414 | # |
| 4415 | # The default value for GDB_PARALLEL is, canonically, ".". |
| 4416 | # The catch is that tests don't expect an additional "./" in file paths so |
| 4417 | # omit any directory for the default case. |
| 4418 | # GDB_PARALLEL is written as "yes" for the default case in Makefile.in to mark |
| 4419 | # its special handling. |
| 4420 | |
| 4421 | proc make_gdb_parallel_path { args } { |
| 4422 | global GDB_PARALLEL objdir |
| 4423 | set joiner [list "file" "join" $objdir] |
| 4424 | if { [info exists GDB_PARALLEL] && $GDB_PARALLEL != "yes" } { |
| 4425 | lappend joiner $GDB_PARALLEL |
| 4426 | } |
| 4427 | set joiner [concat $joiner $args] |
| 4428 | return [eval $joiner] |
| 4429 | } |
| 4430 | |
| 4431 | # Turn BASENAME into a full file name in the standard output |
| 4432 | # directory. It is ok if BASENAME is the empty string; in this case |
| 4433 | # the directory is returned. |
| 4434 | |
| 4435 | proc standard_output_file {basename} { |
| 4436 | global objdir subdir gdb_test_file_name |
| 4437 | |
| 4438 | set dir [make_gdb_parallel_path outputs $subdir $gdb_test_file_name] |
| 4439 | file mkdir $dir |
| 4440 | return [file join $dir $basename] |
| 4441 | } |
| 4442 | |
| 4443 | # Return the name of a file in our standard temporary directory. |
| 4444 | |
| 4445 | proc standard_temp_file {basename} { |
| 4446 | # Since a particular runtest invocation is only executing a single test |
| 4447 | # file at any given time, we can use the runtest pid to build the |
| 4448 | # path of the temp directory. |
| 4449 | set dir [make_gdb_parallel_path temp [pid]] |
| 4450 | file mkdir $dir |
| 4451 | return [file join $dir $basename] |
| 4452 | } |
| 4453 | |
| 4454 | # Set 'testfile', 'srcfile', and 'binfile'. |
| 4455 | # |
| 4456 | # ARGS is a list of source file specifications. |
| 4457 | # Without any arguments, the .exp file's base name is used to |
| 4458 | # compute the source file name. The ".c" extension is added in this case. |
| 4459 | # If ARGS is not empty, each entry is a source file specification. |
| 4460 | # If the specification starts with a ".", it is treated as a suffix |
| 4461 | # to append to the .exp file's base name. |
| 4462 | # If the specification is the empty string, it is treated as if it |
| 4463 | # were ".c". |
| 4464 | # Otherwise it is a file name. |
| 4465 | # The first file in the list is used to set the 'srcfile' global. |
| 4466 | # Each subsequent name is used to set 'srcfile2', 'srcfile3', etc. |
| 4467 | # |
| 4468 | # Most tests should call this without arguments. |
| 4469 | # |
| 4470 | # If a completely different binary file name is needed, then it |
| 4471 | # should be handled in the .exp file with a suitable comment. |
| 4472 | |
| 4473 | proc standard_testfile {args} { |
| 4474 | global gdb_test_file_name |
| 4475 | global subdir |
| 4476 | global gdb_test_file_last_vars |
| 4477 | |
| 4478 | # Outputs. |
| 4479 | global testfile binfile |
| 4480 | |
| 4481 | set testfile $gdb_test_file_name |
| 4482 | set binfile [standard_output_file ${testfile}] |
| 4483 | |
| 4484 | if {[llength $args] == 0} { |
| 4485 | set args .c |
| 4486 | } |
| 4487 | |
| 4488 | # Unset our previous output variables. |
| 4489 | # This can help catch hidden bugs. |
| 4490 | if {[info exists gdb_test_file_last_vars]} { |
| 4491 | foreach varname $gdb_test_file_last_vars { |
| 4492 | global $varname |
| 4493 | catch {unset $varname} |
| 4494 | } |
| 4495 | } |
| 4496 | # 'executable' is often set by tests. |
| 4497 | set gdb_test_file_last_vars {executable} |
| 4498 | |
| 4499 | set suffix "" |
| 4500 | foreach arg $args { |
| 4501 | set varname srcfile$suffix |
| 4502 | global $varname |
| 4503 | |
| 4504 | # Handle an extension. |
| 4505 | if {$arg == ""} { |
| 4506 | set arg $testfile.c |
| 4507 | } elseif {[string range $arg 0 0] == "."} { |
| 4508 | set arg $testfile$arg |
| 4509 | } |
| 4510 | |
| 4511 | set $varname $arg |
| 4512 | lappend gdb_test_file_last_vars $varname |
| 4513 | |
| 4514 | if {$suffix == ""} { |
| 4515 | set suffix 2 |
| 4516 | } else { |
| 4517 | incr suffix |
| 4518 | } |
| 4519 | } |
| 4520 | } |
| 4521 | |
| 4522 | # The default timeout used when testing GDB commands. We want to use |
| 4523 | # the same timeout as the default dejagnu timeout, unless the user has |
| 4524 | # already provided a specific value (probably through a site.exp file). |
| 4525 | global gdb_test_timeout |
| 4526 | if ![info exists gdb_test_timeout] { |
| 4527 | set gdb_test_timeout $timeout |
| 4528 | } |
| 4529 | |
| 4530 | # A list of global variables that GDB testcases should not use. |
| 4531 | # We try to prevent their use by monitoring write accesses and raising |
| 4532 | # an error when that happens. |
| 4533 | set banned_variables { bug_id prms_id } |
| 4534 | |
| 4535 | # A list of procedures that GDB testcases should not use. |
| 4536 | # We try to prevent their use by monitoring invocations and raising |
| 4537 | # an error when that happens. |
| 4538 | set banned_procedures { strace } |
| 4539 | |
| 4540 | # gdb_init is called by runtest at start, but also by several |
| 4541 | # tests directly; gdb_finish is only called from within runtest after |
| 4542 | # each test source execution. |
| 4543 | # Placing several traces by repetitive calls to gdb_init leads |
| 4544 | # to problems, as only one trace is removed in gdb_finish. |
| 4545 | # To overcome this possible problem, we add a variable that records |
| 4546 | # if the banned variables and procedures are already traced. |
| 4547 | set banned_traced 0 |
| 4548 | |
| 4549 | proc gdb_init { test_file_name } { |
| 4550 | # Reset the timeout value to the default. This way, any testcase |
| 4551 | # that changes the timeout value without resetting it cannot affect |
| 4552 | # the timeout used in subsequent testcases. |
| 4553 | global gdb_test_timeout |
| 4554 | global timeout |
| 4555 | set timeout $gdb_test_timeout |
| 4556 | |
| 4557 | if { [regexp ".*gdb\.reverse\/.*" $test_file_name] |
| 4558 | && [target_info exists gdb_reverse_timeout] } { |
| 4559 | set timeout [target_info gdb_reverse_timeout] |
| 4560 | } |
| 4561 | |
| 4562 | # If GDB_INOTIFY is given, check for writes to '.'. This is a |
| 4563 | # debugging tool to help confirm that the test suite is |
| 4564 | # parallel-safe. You need "inotifywait" from the |
| 4565 | # inotify-tools package to use this. |
| 4566 | global GDB_INOTIFY inotify_pid |
| 4567 | if {[info exists GDB_INOTIFY] && ![info exists inotify_pid]} { |
| 4568 | global outdir tool inotify_log_file |
| 4569 | |
| 4570 | set exclusions {outputs temp gdb[.](log|sum) cache} |
| 4571 | set exclusion_re ([join $exclusions |]) |
| 4572 | |
| 4573 | set inotify_log_file [standard_temp_file inotify.out] |
| 4574 | set inotify_pid [exec inotifywait -r -m -e move,create,delete . \ |
| 4575 | --exclude $exclusion_re \ |
| 4576 | |& tee -a $outdir/$tool.log $inotify_log_file &] |
| 4577 | |
| 4578 | # Wait for the watches; hopefully this is long enough. |
| 4579 | sleep 2 |
| 4580 | |
| 4581 | # Clear the log so that we don't emit a warning the first time |
| 4582 | # we check it. |
| 4583 | set fd [open $inotify_log_file w] |
| 4584 | close $fd |
| 4585 | } |
| 4586 | |
| 4587 | # Block writes to all banned variables, and invocation of all |
| 4588 | # banned procedures... |
| 4589 | global banned_variables |
| 4590 | global banned_procedures |
| 4591 | global banned_traced |
| 4592 | if (!$banned_traced) { |
| 4593 | foreach banned_var $banned_variables { |
| 4594 | global "$banned_var" |
| 4595 | trace add variable "$banned_var" write error |
| 4596 | } |
| 4597 | foreach banned_proc $banned_procedures { |
| 4598 | global "$banned_proc" |
| 4599 | trace add execution "$banned_proc" enter error |
| 4600 | } |
| 4601 | set banned_traced 1 |
| 4602 | } |
| 4603 | |
| 4604 | # We set LC_ALL, LC_CTYPE, and LANG to C so that we get the same |
| 4605 | # messages as expected. |
| 4606 | setenv LC_ALL C |
| 4607 | setenv LC_CTYPE C |
| 4608 | setenv LANG C |
| 4609 | |
| 4610 | # Don't let a .inputrc file or an existing setting of INPUTRC mess up |
| 4611 | # the test results. Even if /dev/null doesn't exist on the particular |
| 4612 | # platform, the readline library will use the default setting just by |
| 4613 | # failing to open the file. OTOH, opening /dev/null successfully will |
| 4614 | # also result in the default settings being used since nothing will be |
| 4615 | # read from this file. |
| 4616 | setenv INPUTRC "/dev/null" |
| 4617 | |
| 4618 | # The gdb.base/readline.exp arrow key test relies on the standard VT100 |
| 4619 | # bindings, so make sure that an appropriate terminal is selected. |
| 4620 | # The same bug doesn't show up if we use ^P / ^N instead. |
| 4621 | setenv TERM "vt100" |
| 4622 | |
| 4623 | # Some tests (for example gdb.base/maint.exp) shell out from gdb to use |
| 4624 | # grep. Clear GREP_OPTIONS to make the behavior predictable, |
| 4625 | # especially having color output turned on can cause tests to fail. |
| 4626 | setenv GREP_OPTIONS "" |
| 4627 | |
| 4628 | # Clear $gdbserver_reconnect_p. |
| 4629 | global gdbserver_reconnect_p |
| 4630 | set gdbserver_reconnect_p 1 |
| 4631 | unset gdbserver_reconnect_p |
| 4632 | |
| 4633 | return [default_gdb_init $test_file_name] |
| 4634 | } |
| 4635 | |
| 4636 | proc gdb_finish { } { |
| 4637 | global gdbserver_reconnect_p |
| 4638 | global gdb_prompt |
| 4639 | global cleanfiles |
| 4640 | |
| 4641 | # Exit first, so that the files are no longer in use. |
| 4642 | gdb_exit |
| 4643 | |
| 4644 | if { [llength $cleanfiles] > 0 } { |
| 4645 | eval remote_file target delete $cleanfiles |
| 4646 | set cleanfiles {} |
| 4647 | } |
| 4648 | |
| 4649 | # Unblock write access to the banned variables. Dejagnu typically |
| 4650 | # resets some of them between testcases. |
| 4651 | global banned_variables |
| 4652 | global banned_procedures |
| 4653 | global banned_traced |
| 4654 | if ($banned_traced) { |
| 4655 | foreach banned_var $banned_variables { |
| 4656 | global "$banned_var" |
| 4657 | trace remove variable "$banned_var" write error |
| 4658 | } |
| 4659 | foreach banned_proc $banned_procedures { |
| 4660 | global "$banned_proc" |
| 4661 | trace remove execution "$banned_proc" enter error |
| 4662 | } |
| 4663 | set banned_traced 0 |
| 4664 | } |
| 4665 | } |
| 4666 | |
| 4667 | global debug_format |
| 4668 | set debug_format "unknown" |
| 4669 | |
| 4670 | # Run the gdb command "info source" and extract the debugging format |
| 4671 | # information from the output and save it in debug_format. |
| 4672 | |
| 4673 | proc get_debug_format { } { |
| 4674 | global gdb_prompt |
| 4675 | global verbose |
| 4676 | global expect_out |
| 4677 | global debug_format |
| 4678 | |
| 4679 | set debug_format "unknown" |
| 4680 | send_gdb "info source\n" |
| 4681 | gdb_expect 10 { |
| 4682 | -re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" { |
| 4683 | set debug_format $expect_out(1,string) |
| 4684 | verbose "debug format is $debug_format" |
| 4685 | return 1 |
| 4686 | } |
| 4687 | -re "No current source file.\r\n$gdb_prompt $" { |
| 4688 | perror "get_debug_format used when no current source file" |
| 4689 | return 0 |
| 4690 | } |
| 4691 | -re "$gdb_prompt $" { |
| 4692 | warning "couldn't check debug format (no valid response)." |
| 4693 | return 1 |
| 4694 | } |
| 4695 | timeout { |
| 4696 | warning "couldn't check debug format (timeout)." |
| 4697 | return 1 |
| 4698 | } |
| 4699 | } |
| 4700 | } |
| 4701 | |
| 4702 | # Return true if FORMAT matches the debug format the current test was |
| 4703 | # compiled with. FORMAT is a shell-style globbing pattern; it can use |
| 4704 | # `*', `[...]', and so on. |
| 4705 | # |
| 4706 | # This function depends on variables set by `get_debug_format', above. |
| 4707 | |
| 4708 | proc test_debug_format {format} { |
| 4709 | global debug_format |
| 4710 | |
| 4711 | return [expr [string match $format $debug_format] != 0] |
| 4712 | } |
| 4713 | |
| 4714 | # Like setup_xfail, but takes the name of a debug format (DWARF 1, |
| 4715 | # COFF, stabs, etc). If that format matches the format that the |
| 4716 | # current test was compiled with, then the next test is expected to |
| 4717 | # fail for any target. Returns 1 if the next test or set of tests is |
| 4718 | # expected to fail, 0 otherwise (or if it is unknown). Must have |
| 4719 | # previously called get_debug_format. |
| 4720 | proc setup_xfail_format { format } { |
| 4721 | set ret [test_debug_format $format] |
| 4722 | |
| 4723 | if {$ret} then { |
| 4724 | setup_xfail "*-*-*" |
| 4725 | } |
| 4726 | return $ret |
| 4727 | } |
| 4728 | |
| 4729 | # gdb_get_line_number TEXT [FILE] |
| 4730 | # |
| 4731 | # Search the source file FILE, and return the line number of the |
| 4732 | # first line containing TEXT. If no match is found, an error is thrown. |
| 4733 | # |
| 4734 | # TEXT is a string literal, not a regular expression. |
| 4735 | # |
| 4736 | # The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is |
| 4737 | # specified, and does not start with "/", then it is assumed to be in |
| 4738 | # "$srcdir/$subdir". This is awkward, and can be fixed in the future, |
| 4739 | # by changing the callers and the interface at the same time. |
| 4740 | # In particular: gdb.base/break.exp, gdb.base/condbreak.exp, |
| 4741 | # gdb.base/ena-dis-br.exp. |
| 4742 | # |
| 4743 | # Use this function to keep your test scripts independent of the |
| 4744 | # exact line numbering of the source file. Don't write: |
| 4745 | # |
| 4746 | # send_gdb "break 20" |
| 4747 | # |
| 4748 | # This means that if anyone ever edits your test's source file, |
| 4749 | # your test could break. Instead, put a comment like this on the |
| 4750 | # source file line you want to break at: |
| 4751 | # |
| 4752 | # /* breakpoint spot: frotz.exp: test name */ |
| 4753 | # |
| 4754 | # and then write, in your test script (which we assume is named |
| 4755 | # frotz.exp): |
| 4756 | # |
| 4757 | # send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n" |
| 4758 | # |
| 4759 | # (Yes, Tcl knows how to handle the nested quotes and brackets. |
| 4760 | # Try this: |
| 4761 | # $ tclsh |
| 4762 | # % puts "foo [lindex "bar baz" 1]" |
| 4763 | # foo baz |
| 4764 | # % |
| 4765 | # Tcl is quite clever, for a little stringy language.) |
| 4766 | # |
| 4767 | # === |
| 4768 | # |
| 4769 | # The previous implementation of this procedure used the gdb search command. |
| 4770 | # This version is different: |
| 4771 | # |
| 4772 | # . It works with MI, and it also works when gdb is not running. |
| 4773 | # |
| 4774 | # . It operates on the build machine, not the host machine. |
| 4775 | # |
| 4776 | # . For now, this implementation fakes a current directory of |
| 4777 | # $srcdir/$subdir to be compatible with the old implementation. |
| 4778 | # This will go away eventually and some callers will need to |
| 4779 | # be changed. |
| 4780 | # |
| 4781 | # . The TEXT argument is literal text and matches literally, |
| 4782 | # not a regular expression as it was before. |
| 4783 | # |
| 4784 | # . State changes in gdb, such as changing the current file |
| 4785 | # and setting $_, no longer happen. |
| 4786 | # |
| 4787 | # After a bit of time we can forget about the differences from the |
| 4788 | # old implementation. |
| 4789 | # |
| 4790 | # --chastain 2004-08-05 |
| 4791 | |
| 4792 | proc gdb_get_line_number { text { file "" } } { |
| 4793 | global srcdir |
| 4794 | global subdir |
| 4795 | global srcfile |
| 4796 | |
| 4797 | if { "$file" == "" } then { |
| 4798 | set file "$srcfile" |
| 4799 | } |
| 4800 | if { ! [regexp "^/" "$file"] } then { |
| 4801 | set file "$srcdir/$subdir/$file" |
| 4802 | } |
| 4803 | |
| 4804 | if { [ catch { set fd [open "$file"] } message ] } then { |
| 4805 | error "$message" |
| 4806 | } |
| 4807 | |
| 4808 | set found -1 |
| 4809 | for { set line 1 } { 1 } { incr line } { |
| 4810 | if { [ catch { set nchar [gets "$fd" body] } message ] } then { |
| 4811 | error "$message" |
| 4812 | } |
| 4813 | if { $nchar < 0 } then { |
| 4814 | break |
| 4815 | } |
| 4816 | if { [string first "$text" "$body"] >= 0 } then { |
| 4817 | set found $line |
| 4818 | break |
| 4819 | } |
| 4820 | } |
| 4821 | |
| 4822 | if { [ catch { close "$fd" } message ] } then { |
| 4823 | error "$message" |
| 4824 | } |
| 4825 | |
| 4826 | if {$found == -1} { |
| 4827 | error "undefined tag \"$text\"" |
| 4828 | } |
| 4829 | |
| 4830 | return $found |
| 4831 | } |
| 4832 | |
| 4833 | # Continue the program until it ends. |
| 4834 | # |
| 4835 | # MSSG is the error message that gets printed. If not given, a |
| 4836 | # default is used. |
| 4837 | # COMMAND is the command to invoke. If not given, "continue" is |
| 4838 | # used. |
| 4839 | # ALLOW_EXTRA is a flag indicating whether the test should expect |
| 4840 | # extra output between the "Continuing." line and the program |
| 4841 | # exiting. By default it is zero; if nonzero, any extra output |
| 4842 | # is accepted. |
| 4843 | |
| 4844 | proc gdb_continue_to_end {{mssg ""} {command continue} {allow_extra 0}} { |
| 4845 | global inferior_exited_re use_gdb_stub |
| 4846 | |
| 4847 | if {$mssg == ""} { |
| 4848 | set text "continue until exit" |
| 4849 | } else { |
| 4850 | set text "continue until exit at $mssg" |
| 4851 | } |
| 4852 | if {$allow_extra} { |
| 4853 | set extra ".*" |
| 4854 | } else { |
| 4855 | set extra "" |
| 4856 | } |
| 4857 | |
| 4858 | # By default, we don't rely on exit() behavior of remote stubs -- |
| 4859 | # it's common for exit() to be implemented as a simple infinite |
| 4860 | # loop, or a forced crash/reset. For native targets, by default, we |
| 4861 | # assume process exit is reported as such. If a non-reliable target |
| 4862 | # is used, we set a breakpoint at exit, and continue to that. |
| 4863 | if { [target_info exists exit_is_reliable] } { |
| 4864 | set exit_is_reliable [target_info exit_is_reliable] |
| 4865 | } else { |
| 4866 | set exit_is_reliable [expr ! $use_gdb_stub] |
| 4867 | } |
| 4868 | |
| 4869 | if { ! $exit_is_reliable } { |
| 4870 | if {![gdb_breakpoint "exit"]} { |
| 4871 | return 0 |
| 4872 | } |
| 4873 | gdb_test $command "Continuing..*Breakpoint .*exit.*" \ |
| 4874 | $text |
| 4875 | } else { |
| 4876 | # Continue until we exit. Should not stop again. |
| 4877 | # Don't bother to check the output of the program, that may be |
| 4878 | # extremely tough for some remote systems. |
| 4879 | gdb_test $command \ |
| 4880 | "Continuing.\[\r\n0-9\]+${extra}(... EXIT code 0\[\r\n\]+|$inferior_exited_re normally).*"\ |
| 4881 | $text |
| 4882 | } |
| 4883 | } |
| 4884 | |
| 4885 | proc rerun_to_main {} { |
| 4886 | global gdb_prompt use_gdb_stub |
| 4887 | |
| 4888 | if $use_gdb_stub { |
| 4889 | gdb_run_cmd |
| 4890 | gdb_expect { |
| 4891 | -re ".*Breakpoint .*main .*$gdb_prompt $"\ |
| 4892 | {pass "rerun to main" ; return 0} |
| 4893 | -re "$gdb_prompt $"\ |
| 4894 | {fail "rerun to main" ; return 0} |
| 4895 | timeout {fail "(timeout) rerun to main" ; return 0} |
| 4896 | } |
| 4897 | } else { |
| 4898 | send_gdb "run\n" |
| 4899 | gdb_expect { |
| 4900 | -re "The program .* has been started already.*y or n. $" { |
| 4901 | send_gdb "y\n" |
| 4902 | exp_continue |
| 4903 | } |
| 4904 | -re "Starting program.*$gdb_prompt $"\ |
| 4905 | {pass "rerun to main" ; return 0} |
| 4906 | -re "$gdb_prompt $"\ |
| 4907 | {fail "rerun to main" ; return 0} |
| 4908 | timeout {fail "(timeout) rerun to main" ; return 0} |
| 4909 | } |
| 4910 | } |
| 4911 | } |
| 4912 | |
| 4913 | # Return true if a test should be skipped due to lack of floating |
| 4914 | # point support or GDB can't fetch the contents from floating point |
| 4915 | # registers. |
| 4916 | |
| 4917 | gdb_caching_proc gdb_skip_float_test { |
| 4918 | if [target_info exists gdb,skip_float_tests] { |
| 4919 | return 1 |
| 4920 | } |
| 4921 | |
| 4922 | # There is an ARM kernel ptrace bug that hardware VFP registers |
| 4923 | # are not updated after GDB ptrace set VFP registers. The bug |
| 4924 | # was introduced by kernel commit 8130b9d7b9d858aa04ce67805e8951e3cb6e9b2f |
| 4925 | # in 2012 and is fixed in e2dfb4b880146bfd4b6aa8e138c0205407cebbaf |
| 4926 | # in May 2016. In other words, kernels older than 4.6.3, 4.4.14, |
| 4927 | # 4.1.27, 3.18.36, and 3.14.73 have this bug. |
| 4928 | # This kernel bug is detected by check how does GDB change the |
| 4929 | # program result by changing one VFP register. |
| 4930 | if { [istarget "arm*-*-linux*"] } { |
| 4931 | |
| 4932 | set compile_flags {debug nowarnings } |
| 4933 | |
| 4934 | # Set up, compile, and execute a test program having VFP |
| 4935 | # operations. |
| 4936 | set src [standard_temp_file arm_vfp[pid].c] |
| 4937 | set exe [standard_temp_file arm_vfp[pid].x] |
| 4938 | |
| 4939 | gdb_produce_source $src { |
| 4940 | int main() { |
| 4941 | double d = 4.0; |
| 4942 | int ret; |
| 4943 | |
| 4944 | asm ("vldr d0, [%0]" : : "r" (&d)); |
| 4945 | asm ("vldr d1, [%0]" : : "r" (&d)); |
| 4946 | asm (".global break_here\n" |
| 4947 | "break_here:"); |
| 4948 | asm ("vcmp.f64 d0, d1\n" |
| 4949 | "vmrs APSR_nzcv, fpscr\n" |
| 4950 | "bne L_value_different\n" |
| 4951 | "movs %0, #0\n" |
| 4952 | "b L_end\n" |
| 4953 | "L_value_different:\n" |
| 4954 | "movs %0, #1\n" |
| 4955 | "L_end:\n" : "=r" (ret) :); |
| 4956 | |
| 4957 | /* Return $d0 != $d1. */ |
| 4958 | return ret; |
| 4959 | } |
| 4960 | } |
| 4961 | |
| 4962 | verbose "compiling testfile $src" 2 |
| 4963 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 4964 | file delete $src |
| 4965 | |
| 4966 | if ![string match "" $lines] then { |
| 4967 | verbose "testfile compilation failed, returning 1" 2 |
| 4968 | return 0 |
| 4969 | } |
| 4970 | |
| 4971 | # No error message, compilation succeeded so now run it via gdb. |
| 4972 | # Run the test up to 5 times to detect whether ptrace can |
| 4973 | # correctly update VFP registers or not. |
| 4974 | set skip_vfp_test 0 |
| 4975 | for {set i 0} {$i < 5} {incr i} { |
| 4976 | global gdb_prompt srcdir subdir |
| 4977 | |
| 4978 | gdb_exit |
| 4979 | gdb_start |
| 4980 | gdb_reinitialize_dir $srcdir/$subdir |
| 4981 | gdb_load "$exe" |
| 4982 | |
| 4983 | runto_main |
| 4984 | gdb_test "break *break_here" |
| 4985 | gdb_continue_to_breakpoint "break_here" |
| 4986 | |
| 4987 | # Modify $d0 to a different value, so the exit code should |
| 4988 | # be 1. |
| 4989 | gdb_test "set \$d0 = 5.0" |
| 4990 | |
| 4991 | set test "continue to exit" |
| 4992 | gdb_test_multiple "continue" "$test" { |
| 4993 | -re "exited with code 01.*$gdb_prompt $" { |
| 4994 | } |
| 4995 | -re "exited normally.*$gdb_prompt $" { |
| 4996 | # However, the exit code is 0. That means something |
| 4997 | # wrong in setting VFP registers. |
| 4998 | set skip_vfp_test 1 |
| 4999 | break |
| 5000 | } |
| 5001 | } |
| 5002 | } |
| 5003 | |
| 5004 | gdb_exit |
| 5005 | remote_file build delete $exe |
| 5006 | |
| 5007 | return $skip_vfp_test |
| 5008 | } |
| 5009 | return 0 |
| 5010 | } |
| 5011 | |
| 5012 | # Print a message and return true if a test should be skipped |
| 5013 | # due to lack of stdio support. |
| 5014 | |
| 5015 | proc gdb_skip_stdio_test { msg } { |
| 5016 | if [target_info exists gdb,noinferiorio] { |
| 5017 | verbose "Skipping test '$msg': no inferior i/o." |
| 5018 | return 1 |
| 5019 | } |
| 5020 | return 0 |
| 5021 | } |
| 5022 | |
| 5023 | proc gdb_skip_bogus_test { msg } { |
| 5024 | return 0 |
| 5025 | } |
| 5026 | |
| 5027 | # Return true if a test should be skipped due to lack of XML support |
| 5028 | # in the host GDB. |
| 5029 | # NOTE: This must be called while gdb is *not* running. |
| 5030 | |
| 5031 | gdb_caching_proc gdb_skip_xml_test { |
| 5032 | global gdb_prompt |
| 5033 | global srcdir |
| 5034 | |
| 5035 | set xml_file [gdb_remote_download host "${srcdir}/gdb.xml/trivial.xml"] |
| 5036 | |
| 5037 | gdb_start |
| 5038 | set xml_missing 0 |
| 5039 | gdb_test_multiple "set tdesc filename $xml_file" "" { |
| 5040 | -re ".*XML support was disabled at compile time.*$gdb_prompt $" { |
| 5041 | set xml_missing 1 |
| 5042 | } |
| 5043 | -re ".*$gdb_prompt $" { } |
| 5044 | } |
| 5045 | gdb_exit |
| 5046 | return $xml_missing |
| 5047 | } |
| 5048 | |
| 5049 | # Return true if argv[0] is available. |
| 5050 | |
| 5051 | gdb_caching_proc gdb_has_argv0 { |
| 5052 | set result 0 |
| 5053 | |
| 5054 | # Set up, compile, and execute a test program to check whether |
| 5055 | # argv[0] is available. |
| 5056 | set src [standard_temp_file has_argv0[pid].c] |
| 5057 | set exe [standard_temp_file has_argv0[pid].x] |
| 5058 | |
| 5059 | gdb_produce_source $src { |
| 5060 | int main (int argc, char **argv) { |
| 5061 | return 0; |
| 5062 | } |
| 5063 | } |
| 5064 | |
| 5065 | gdb_compile $src $exe executable {debug} |
| 5066 | |
| 5067 | # Helper proc. |
| 5068 | proc gdb_has_argv0_1 { exe } { |
| 5069 | global srcdir subdir |
| 5070 | global gdb_prompt hex |
| 5071 | |
| 5072 | gdb_exit |
| 5073 | gdb_start |
| 5074 | gdb_reinitialize_dir $srcdir/$subdir |
| 5075 | gdb_load "$exe" |
| 5076 | |
| 5077 | # Set breakpoint on main. |
| 5078 | gdb_test_multiple "break main" "break main" { |
| 5079 | -re "Breakpoint.*${gdb_prompt} $" { |
| 5080 | } |
| 5081 | -re "${gdb_prompt} $" { |
| 5082 | return 0 |
| 5083 | } |
| 5084 | } |
| 5085 | |
| 5086 | # Run to main. |
| 5087 | gdb_run_cmd |
| 5088 | gdb_test_multiple "" "run to main" { |
| 5089 | -re "Breakpoint.*${gdb_prompt} $" { |
| 5090 | } |
| 5091 | -re "${gdb_prompt} $" { |
| 5092 | return 0 |
| 5093 | } |
| 5094 | } |
| 5095 | |
| 5096 | set old_elements "200" |
| 5097 | set test "show print elements" |
| 5098 | gdb_test_multiple $test $test { |
| 5099 | -re "Limit on string chars or array elements to print is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { |
| 5100 | set old_elements $expect_out(1,string) |
| 5101 | } |
| 5102 | } |
| 5103 | set old_repeats "200" |
| 5104 | set test "show print repeats" |
| 5105 | gdb_test_multiple $test $test { |
| 5106 | -re "Threshold for repeated print elements is (\[^\r\n\]+)\\.\r\n$gdb_prompt $" { |
| 5107 | set old_repeats $expect_out(1,string) |
| 5108 | } |
| 5109 | } |
| 5110 | gdb_test_no_output "set print elements unlimited" "" |
| 5111 | gdb_test_no_output "set print repeats unlimited" "" |
| 5112 | |
| 5113 | set retval 0 |
| 5114 | # Check whether argc is 1. |
| 5115 | gdb_test_multiple "p argc" "p argc" { |
| 5116 | -re " = 1\r\n${gdb_prompt} $" { |
| 5117 | |
| 5118 | gdb_test_multiple "p argv\[0\]" "p argv\[0\]" { |
| 5119 | -re " = $hex \".*[file tail $exe]\"\r\n${gdb_prompt} $" { |
| 5120 | set retval 1 |
| 5121 | } |
| 5122 | -re "${gdb_prompt} $" { |
| 5123 | } |
| 5124 | } |
| 5125 | } |
| 5126 | -re "${gdb_prompt} $" { |
| 5127 | } |
| 5128 | } |
| 5129 | |
| 5130 | gdb_test_no_output "set print elements $old_elements" "" |
| 5131 | gdb_test_no_output "set print repeats $old_repeats" "" |
| 5132 | |
| 5133 | return $retval |
| 5134 | } |
| 5135 | |
| 5136 | set result [gdb_has_argv0_1 $exe] |
| 5137 | |
| 5138 | gdb_exit |
| 5139 | file delete $src |
| 5140 | file delete $exe |
| 5141 | |
| 5142 | if { !$result |
| 5143 | && ([istarget *-*-linux*] |
| 5144 | || [istarget *-*-freebsd*] || [istarget *-*-kfreebsd*] |
| 5145 | || [istarget *-*-netbsd*] || [istarget *-*-knetbsd*] |
| 5146 | || [istarget *-*-openbsd*] |
| 5147 | || [istarget *-*-darwin*] |
| 5148 | || [istarget *-*-solaris*] |
| 5149 | || [istarget *-*-aix*] |
| 5150 | || [istarget *-*-gnu*] |
| 5151 | || [istarget *-*-cygwin*] || [istarget *-*-mingw32*] |
| 5152 | || [istarget *-*-*djgpp*] || [istarget *-*-go32*] |
| 5153 | || [istarget *-wince-pe] || [istarget *-*-mingw32ce*] |
| 5154 | || [istarget *-*-symbianelf*] |
| 5155 | || [istarget *-*-osf*] |
| 5156 | || [istarget *-*-dicos*] |
| 5157 | || [istarget *-*-nto*] |
| 5158 | || [istarget *-*-*vms*] |
| 5159 | || [istarget *-*-lynx*178]) } { |
| 5160 | fail "argv\[0\] should be available on this target" |
| 5161 | } |
| 5162 | |
| 5163 | return $result |
| 5164 | } |
| 5165 | |
| 5166 | # Note: the procedure gdb_gnu_strip_debug will produce an executable called |
| 5167 | # ${binfile}.dbglnk, which is just like the executable ($binfile) but without |
| 5168 | # the debuginfo. Instead $binfile has a .gnu_debuglink section which contains |
| 5169 | # the name of a debuginfo only file. This file will be stored in the same |
| 5170 | # subdirectory. |
| 5171 | |
| 5172 | # Functions for separate debug info testing |
| 5173 | |
| 5174 | # starting with an executable: |
| 5175 | # foo --> original executable |
| 5176 | |
| 5177 | # at the end of the process we have: |
| 5178 | # foo.stripped --> foo w/o debug info |
| 5179 | # foo.debug --> foo's debug info |
| 5180 | # foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug. |
| 5181 | |
| 5182 | # Fetch the build id from the file. |
| 5183 | # Returns "" if there is none. |
| 5184 | |
| 5185 | proc get_build_id { filename } { |
| 5186 | if { ([istarget "*-*-mingw*"] |
| 5187 | || [istarget *-*-cygwin*]) } { |
| 5188 | set objdump_program [gdb_find_objdump] |
| 5189 | set result [catch {set data [exec $objdump_program -p $filename | grep signature | cut "-d " -f4]} output] |
| 5190 | verbose "result is $result" |
| 5191 | verbose "output is $output" |
| 5192 | if {$result == 1} { |
| 5193 | return "" |
| 5194 | } |
| 5195 | return $data |
| 5196 | } else { |
| 5197 | set tmp [standard_output_file "${filename}-tmp"] |
| 5198 | set objcopy_program [gdb_find_objcopy] |
| 5199 | set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $filename $tmp" output] |
| 5200 | verbose "result is $result" |
| 5201 | verbose "output is $output" |
| 5202 | if {$result == 1} { |
| 5203 | return "" |
| 5204 | } |
| 5205 | set fi [open $tmp] |
| 5206 | fconfigure $fi -translation binary |
| 5207 | # Skip the NOTE header. |
| 5208 | read $fi 16 |
| 5209 | set data [read $fi] |
| 5210 | close $fi |
| 5211 | file delete $tmp |
| 5212 | if ![string compare $data ""] then { |
| 5213 | return "" |
| 5214 | } |
| 5215 | # Convert it to hex. |
| 5216 | binary scan $data H* data |
| 5217 | return $data |
| 5218 | } |
| 5219 | } |
| 5220 | |
| 5221 | # Return the build-id hex string (usually 160 bits as 40 hex characters) |
| 5222 | # converted to the form: .build-id/ab/cdef1234...89.debug |
| 5223 | # Return "" if no build-id found. |
| 5224 | proc build_id_debug_filename_get { filename } { |
| 5225 | set data [get_build_id $filename] |
| 5226 | if { $data == "" } { |
| 5227 | return "" |
| 5228 | } |
| 5229 | regsub {^..} $data {\0/} data |
| 5230 | return ".build-id/${data}.debug" |
| 5231 | } |
| 5232 | |
| 5233 | # Create stripped files for DEST, replacing it. If ARGS is passed, it is a |
| 5234 | # list of optional flags. The only currently supported flag is no-main, |
| 5235 | # which removes the symbol entry for main from the separate debug file. |
| 5236 | # |
| 5237 | # Function returns zero on success. Function will return non-zero failure code |
| 5238 | # on some targets not supporting separate debug info (such as i386-msdos). |
| 5239 | |
| 5240 | proc gdb_gnu_strip_debug { dest args } { |
| 5241 | |
| 5242 | # Use the first separate debug info file location searched by GDB so the |
| 5243 | # run cannot be broken by some stale file searched with higher precedence. |
| 5244 | set debug_file "${dest}.debug" |
| 5245 | |
| 5246 | set strip_to_file_program [transform strip] |
| 5247 | set objcopy_program [gdb_find_objcopy] |
| 5248 | |
| 5249 | set debug_link [file tail $debug_file] |
| 5250 | set stripped_file "${dest}.stripped" |
| 5251 | |
| 5252 | # Get rid of the debug info, and store result in stripped_file |
| 5253 | # something like gdb/testsuite/gdb.base/blah.stripped. |
| 5254 | set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output] |
| 5255 | verbose "result is $result" |
| 5256 | verbose "output is $output" |
| 5257 | if {$result == 1} { |
| 5258 | return 1 |
| 5259 | } |
| 5260 | |
| 5261 | # Workaround PR binutils/10802: |
| 5262 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). |
| 5263 | set perm [file attributes ${dest} -permissions] |
| 5264 | file attributes ${stripped_file} -permissions $perm |
| 5265 | |
| 5266 | # Get rid of everything but the debug info, and store result in debug_file |
| 5267 | # This will be in the .debug subdirectory, see above. |
| 5268 | set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output] |
| 5269 | verbose "result is $result" |
| 5270 | verbose "output is $output" |
| 5271 | if {$result == 1} { |
| 5272 | return 1 |
| 5273 | } |
| 5274 | |
| 5275 | # If no-main is passed, strip the symbol for main from the separate |
| 5276 | # file. This is to simulate the behavior of elfutils's eu-strip, which |
| 5277 | # leaves the symtab in the original file only. There's no way to get |
| 5278 | # objcopy or strip to remove the symbol table without also removing the |
| 5279 | # debugging sections, so this is as close as we can get. |
| 5280 | if { [llength $args] == 1 && [lindex $args 0] == "no-main" } { |
| 5281 | set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output] |
| 5282 | verbose "result is $result" |
| 5283 | verbose "output is $output" |
| 5284 | if {$result == 1} { |
| 5285 | return 1 |
| 5286 | } |
| 5287 | file delete "${debug_file}" |
| 5288 | file rename "${debug_file}-tmp" "${debug_file}" |
| 5289 | } |
| 5290 | |
| 5291 | # Link the two previous output files together, adding the .gnu_debuglink |
| 5292 | # section to the stripped_file, containing a pointer to the debug_file, |
| 5293 | # save the new file in dest. |
| 5294 | # This will be the regular executable filename, in the usual location. |
| 5295 | set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output] |
| 5296 | verbose "result is $result" |
| 5297 | verbose "output is $output" |
| 5298 | if {$result == 1} { |
| 5299 | return 1 |
| 5300 | } |
| 5301 | |
| 5302 | # Workaround PR binutils/10802: |
| 5303 | # Preserve the 'x' bit also for PIEs (Position Independent Executables). |
| 5304 | set perm [file attributes ${stripped_file} -permissions] |
| 5305 | file attributes ${dest} -permissions $perm |
| 5306 | |
| 5307 | return 0 |
| 5308 | } |
| 5309 | |
| 5310 | # Test the output of GDB_COMMAND matches the pattern obtained |
| 5311 | # by concatenating all elements of EXPECTED_LINES. This makes |
| 5312 | # it possible to split otherwise very long string into pieces. |
| 5313 | # If third argument is not empty, it's used as the name of the |
| 5314 | # test to be printed on pass/fail. |
| 5315 | proc help_test_raw { gdb_command expected_lines args } { |
| 5316 | set message $gdb_command |
| 5317 | if [llength $args]>0 then { |
| 5318 | set message [lindex $args 0] |
| 5319 | } |
| 5320 | set expected_output [join $expected_lines ""] |
| 5321 | gdb_test "${gdb_command}" "${expected_output}" $message |
| 5322 | } |
| 5323 | |
| 5324 | # Test the output of "help COMMAND_CLASS". EXPECTED_INITIAL_LINES |
| 5325 | # are regular expressions that should match the beginning of output, |
| 5326 | # before the list of commands in that class. The presence of |
| 5327 | # command list and standard epilogue will be tested automatically. |
| 5328 | # Notice that the '[' and ']' characters don't need to be escaped for strings |
| 5329 | # wrapped in {} braces. |
| 5330 | proc test_class_help { command_class expected_initial_lines args } { |
| 5331 | set l_stock_body { |
| 5332 | "List of commands\:.*[\r\n]+" |
| 5333 | "Type \"help\" followed by command name for full documentation\.[\r\n]+" |
| 5334 | "Type \"apropos word\" to search for commands related to \"word\"\.[\r\n]+" |
| 5335 | "Command name abbreviations are allowed if unambiguous\." |
| 5336 | } |
| 5337 | set l_entire_body [concat $expected_initial_lines $l_stock_body] |
| 5338 | |
| 5339 | eval [list help_test_raw "help ${command_class}" $l_entire_body] $args |
| 5340 | } |
| 5341 | |
| 5342 | # COMMAND_LIST should have either one element -- command to test, or |
| 5343 | # two elements -- abbreviated command to test, and full command the first |
| 5344 | # element is abbreviation of. |
| 5345 | # The command must be a prefix command. EXPECTED_INITIAL_LINES |
| 5346 | # are regular expressions that should match the beginning of output, |
| 5347 | # before the list of subcommands. The presence of |
| 5348 | # subcommand list and standard epilogue will be tested automatically. |
| 5349 | proc test_prefix_command_help { command_list expected_initial_lines args } { |
| 5350 | set command [lindex $command_list 0] |
| 5351 | if {[llength $command_list]>1} { |
| 5352 | set full_command [lindex $command_list 1] |
| 5353 | } else { |
| 5354 | set full_command $command |
| 5355 | } |
| 5356 | # Use 'list' and not just {} because we want variables to |
| 5357 | # be expanded in this list. |
| 5358 | set l_stock_body [list\ |
| 5359 | "List of $full_command subcommands\:.*\[\r\n\]+"\ |
| 5360 | "Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\ |
| 5361 | "Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\ |
| 5362 | "Command name abbreviations are allowed if unambiguous\."] |
| 5363 | set l_entire_body [concat $expected_initial_lines $l_stock_body] |
| 5364 | if {[llength $args]>0} { |
| 5365 | help_test_raw "help ${command}" $l_entire_body [lindex $args 0] |
| 5366 | } else { |
| 5367 | help_test_raw "help ${command}" $l_entire_body |
| 5368 | } |
| 5369 | } |
| 5370 | |
| 5371 | # Build executable named EXECUTABLE from specifications that allow |
| 5372 | # different options to be passed to different sub-compilations. |
| 5373 | # TESTNAME is the name of the test; this is passed to 'untested' if |
| 5374 | # something fails. |
| 5375 | # OPTIONS is passed to the final link, using gdb_compile. If OPTIONS |
| 5376 | # contains the option "pthreads", then gdb_compile_pthreads is used. |
| 5377 | # ARGS is a flat list of source specifications, of the form: |
| 5378 | # { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... } |
| 5379 | # Each SOURCE is compiled to an object file using its OPTIONS, |
| 5380 | # using gdb_compile. |
| 5381 | # Returns 0 on success, -1 on failure. |
| 5382 | proc build_executable_from_specs {testname executable options args} { |
| 5383 | global subdir |
| 5384 | global srcdir |
| 5385 | |
| 5386 | set binfile [standard_output_file $executable] |
| 5387 | |
| 5388 | set info_options "" |
| 5389 | if { [lsearch -exact $options "c++"] >= 0 } { |
| 5390 | set info_options "c++" |
| 5391 | } |
| 5392 | if [get_compiler_info ${info_options}] { |
| 5393 | return -1 |
| 5394 | } |
| 5395 | |
| 5396 | set func gdb_compile |
| 5397 | set func_index [lsearch -regexp $options {^(pthreads|shlib|shlib_pthreads)$}] |
| 5398 | if {$func_index != -1} { |
| 5399 | set func "${func}_[lindex $options $func_index]" |
| 5400 | } |
| 5401 | |
| 5402 | # gdb_compile_shlib and gdb_compile_shlib_pthreads do not use the 3rd |
| 5403 | # parameter. They also requires $sources while gdb_compile and |
| 5404 | # gdb_compile_pthreads require $objects. Moreover they ignore any options. |
| 5405 | if [string match gdb_compile_shlib* $func] { |
| 5406 | set sources_path {} |
| 5407 | foreach {s local_options} $args { |
| 5408 | if { [regexp "^/" "$s"] } then { |
| 5409 | lappend sources_path "$s" |
| 5410 | } else { |
| 5411 | lappend sources_path "$srcdir/$subdir/$s" |
| 5412 | } |
| 5413 | } |
| 5414 | set ret [$func $sources_path "${binfile}" $options] |
| 5415 | } elseif {[lsearch -exact $options rust] != -1} { |
| 5416 | set sources_path {} |
| 5417 | foreach {s local_options} $args { |
| 5418 | if { [regexp "^/" "$s"] } then { |
| 5419 | lappend sources_path "$s" |
| 5420 | } else { |
| 5421 | lappend sources_path "$srcdir/$subdir/$s" |
| 5422 | } |
| 5423 | } |
| 5424 | set ret [gdb_compile_rust $sources_path "${binfile}" $options] |
| 5425 | } else { |
| 5426 | set objects {} |
| 5427 | set i 0 |
| 5428 | foreach {s local_options} $args { |
| 5429 | if { ! [regexp "^/" "$s"] } then { |
| 5430 | set s "$srcdir/$subdir/$s" |
| 5431 | } |
| 5432 | if { [gdb_compile "${s}" "${binfile}${i}.o" object $local_options] != "" } { |
| 5433 | untested $testname |
| 5434 | return -1 |
| 5435 | } |
| 5436 | lappend objects "${binfile}${i}.o" |
| 5437 | incr i |
| 5438 | } |
| 5439 | set ret [$func $objects "${binfile}" executable $options] |
| 5440 | } |
| 5441 | if { $ret != "" } { |
| 5442 | untested $testname |
| 5443 | return -1 |
| 5444 | } |
| 5445 | |
| 5446 | return 0 |
| 5447 | } |
| 5448 | |
| 5449 | # Build executable named EXECUTABLE, from SOURCES. If SOURCES are not |
| 5450 | # provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test |
| 5451 | # to pass to untested, if something is wrong. OPTIONS are passed |
| 5452 | # to gdb_compile directly. |
| 5453 | proc build_executable { testname executable {sources ""} {options {debug}} } { |
| 5454 | if {[llength $sources]==0} { |
| 5455 | set sources ${executable}.c |
| 5456 | } |
| 5457 | |
| 5458 | set arglist [list $testname $executable $options] |
| 5459 | foreach source $sources { |
| 5460 | lappend arglist $source $options |
| 5461 | } |
| 5462 | |
| 5463 | return [eval build_executable_from_specs $arglist] |
| 5464 | } |
| 5465 | |
| 5466 | # Starts fresh GDB binary and loads an optional executable into GDB. |
| 5467 | # Usage: clean_restart [executable] |
| 5468 | # EXECUTABLE is the basename of the binary. |
| 5469 | |
| 5470 | proc clean_restart { args } { |
| 5471 | global srcdir |
| 5472 | global subdir |
| 5473 | |
| 5474 | if { [llength $args] > 1 } { |
| 5475 | error "bad number of args: [llength $args]" |
| 5476 | } |
| 5477 | |
| 5478 | gdb_exit |
| 5479 | gdb_start |
| 5480 | gdb_reinitialize_dir $srcdir/$subdir |
| 5481 | |
| 5482 | if { [llength $args] >= 1 } { |
| 5483 | set executable [lindex $args 0] |
| 5484 | set binfile [standard_output_file ${executable}] |
| 5485 | gdb_load ${binfile} |
| 5486 | } |
| 5487 | } |
| 5488 | |
| 5489 | # Prepares for testing by calling build_executable_full, then |
| 5490 | # clean_restart. |
| 5491 | # TESTNAME is the name of the test. |
| 5492 | # Each element in ARGS is a list of the form |
| 5493 | # { EXECUTABLE OPTIONS SOURCE_SPEC... } |
| 5494 | # These are passed to build_executable_from_specs, which see. |
| 5495 | # The last EXECUTABLE is passed to clean_restart. |
| 5496 | # Returns 0 on success, non-zero on failure. |
| 5497 | proc prepare_for_testing_full {testname args} { |
| 5498 | foreach spec $args { |
| 5499 | if {[eval build_executable_from_specs [list $testname] $spec] == -1} { |
| 5500 | return -1 |
| 5501 | } |
| 5502 | set executable [lindex $spec 0] |
| 5503 | } |
| 5504 | clean_restart $executable |
| 5505 | return 0 |
| 5506 | } |
| 5507 | |
| 5508 | # Prepares for testing, by calling build_executable, and then clean_restart. |
| 5509 | # Please refer to build_executable for parameter description. |
| 5510 | proc prepare_for_testing { testname executable {sources ""} {options {debug}}} { |
| 5511 | |
| 5512 | if {[build_executable $testname $executable $sources $options] == -1} { |
| 5513 | return -1 |
| 5514 | } |
| 5515 | clean_restart $executable |
| 5516 | |
| 5517 | return 0 |
| 5518 | } |
| 5519 | |
| 5520 | proc get_valueof { fmt exp default } { |
| 5521 | global gdb_prompt |
| 5522 | |
| 5523 | set test "get valueof \"${exp}\"" |
| 5524 | set val ${default} |
| 5525 | gdb_test_multiple "print${fmt} ${exp}" "$test" { |
| 5526 | -re "\\$\[0-9\]* = (.*)\[\r\n\]*$gdb_prompt $" { |
| 5527 | set val $expect_out(1,string) |
| 5528 | pass "$test ($val)" |
| 5529 | } |
| 5530 | timeout { |
| 5531 | fail "$test (timeout)" |
| 5532 | } |
| 5533 | } |
| 5534 | return ${val} |
| 5535 | } |
| 5536 | |
| 5537 | proc get_integer_valueof { exp default } { |
| 5538 | global gdb_prompt |
| 5539 | |
| 5540 | set test "get integer valueof \"${exp}\"" |
| 5541 | set val ${default} |
| 5542 | gdb_test_multiple "print /d ${exp}" "$test" { |
| 5543 | -re "\\$\[0-9\]* = (\[-\]*\[0-9\]*).*$gdb_prompt $" { |
| 5544 | set val $expect_out(1,string) |
| 5545 | pass "$test ($val)" |
| 5546 | } |
| 5547 | timeout { |
| 5548 | fail "$test (timeout)" |
| 5549 | } |
| 5550 | } |
| 5551 | return ${val} |
| 5552 | } |
| 5553 | |
| 5554 | # Retrieve the value of EXP in the inferior, as an hexadecimal value |
| 5555 | # (using "print /x"). DEFAULT is used as fallback if print fails. |
| 5556 | # TEST is the test message to use. If can be ommitted, in which case |
| 5557 | # a test message is built from EXP. |
| 5558 | |
| 5559 | proc get_hexadecimal_valueof { exp default {test ""} } { |
| 5560 | global gdb_prompt |
| 5561 | |
| 5562 | if {$test == ""} { |
| 5563 | set test "get hexadecimal valueof \"${exp}\"" |
| 5564 | } |
| 5565 | |
| 5566 | set val ${default} |
| 5567 | gdb_test_multiple "print /x ${exp}" $test { |
| 5568 | -re "\\$\[0-9\]* = (0x\[0-9a-zA-Z\]+).*$gdb_prompt $" { |
| 5569 | set val $expect_out(1,string) |
| 5570 | pass "$test" |
| 5571 | } |
| 5572 | } |
| 5573 | return ${val} |
| 5574 | } |
| 5575 | |
| 5576 | proc get_sizeof { type default } { |
| 5577 | return [get_integer_valueof "sizeof (${type})" $default] |
| 5578 | } |
| 5579 | |
| 5580 | proc get_target_charset { } { |
| 5581 | global gdb_prompt |
| 5582 | |
| 5583 | gdb_test_multiple "show target-charset" "" { |
| 5584 | -re "The target character set is \"auto; currently (\[^\"\]*)\".*$gdb_prompt $" { |
| 5585 | return $expect_out(1,string) |
| 5586 | } |
| 5587 | -re "The target character set is \"(\[^\"\]*)\".*$gdb_prompt $" { |
| 5588 | return $expect_out(1,string) |
| 5589 | } |
| 5590 | } |
| 5591 | |
| 5592 | # Pick a reasonable default. |
| 5593 | warning "Unable to read target-charset." |
| 5594 | return "UTF-8" |
| 5595 | } |
| 5596 | |
| 5597 | # Get the address of VAR. |
| 5598 | |
| 5599 | proc get_var_address { var } { |
| 5600 | global gdb_prompt hex |
| 5601 | |
| 5602 | # Match output like: |
| 5603 | # $1 = (int *) 0x0 |
| 5604 | # $5 = (int (*)()) 0 |
| 5605 | # $6 = (int (*)()) 0x24 <function_bar> |
| 5606 | |
| 5607 | gdb_test_multiple "print &${var}" "get address of ${var}" { |
| 5608 | -re "\\\$\[0-9\]+ = \\(.*\\) (0|$hex)( <${var}>)?\[\r\n\]+${gdb_prompt} $" |
| 5609 | { |
| 5610 | pass "get address of ${var}" |
| 5611 | if { $expect_out(1,string) == "0" } { |
| 5612 | return "0x0" |
| 5613 | } else { |
| 5614 | return $expect_out(1,string) |
| 5615 | } |
| 5616 | } |
| 5617 | } |
| 5618 | return "" |
| 5619 | } |
| 5620 | |
| 5621 | # Get the current value for remotetimeout and return it. |
| 5622 | proc get_remotetimeout { } { |
| 5623 | global gdb_prompt |
| 5624 | global decimal |
| 5625 | |
| 5626 | gdb_test_multiple "show remotetimeout" "" { |
| 5627 | -re "Timeout limit to wait for target to respond is ($decimal).*$gdb_prompt $" { |
| 5628 | return $expect_out(1,string) |
| 5629 | } |
| 5630 | } |
| 5631 | |
| 5632 | # Pick the default that gdb uses |
| 5633 | warning "Unable to read remotetimeout" |
| 5634 | return 300 |
| 5635 | } |
| 5636 | |
| 5637 | # Set the remotetimeout to the specified timeout. Nothing is returned. |
| 5638 | proc set_remotetimeout { timeout } { |
| 5639 | global gdb_prompt |
| 5640 | |
| 5641 | gdb_test_multiple "set remotetimeout $timeout" "" { |
| 5642 | -re "$gdb_prompt $" { |
| 5643 | verbose "Set remotetimeout to $timeout\n" |
| 5644 | } |
| 5645 | } |
| 5646 | } |
| 5647 | |
| 5648 | # ROOT and FULL are file names. Returns the relative path from ROOT |
| 5649 | # to FULL. Note that FULL must be in a subdirectory of ROOT. |
| 5650 | # For example, given ROOT = /usr/bin and FULL = /usr/bin/ls, this |
| 5651 | # will return "ls". |
| 5652 | |
| 5653 | proc relative_filename {root full} { |
| 5654 | set root_split [file split $root] |
| 5655 | set full_split [file split $full] |
| 5656 | |
| 5657 | set len [llength $root_split] |
| 5658 | |
| 5659 | if {[eval file join $root_split] |
| 5660 | != [eval file join [lrange $full_split 0 [expr {$len - 1}]]]} { |
| 5661 | error "$full not a subdir of $root" |
| 5662 | } |
| 5663 | |
| 5664 | return [eval file join [lrange $full_split $len end]] |
| 5665 | } |
| 5666 | |
| 5667 | # Log gdb command line and script if requested. |
| 5668 | if {[info exists TRANSCRIPT]} { |
| 5669 | rename send_gdb real_send_gdb |
| 5670 | rename remote_spawn real_remote_spawn |
| 5671 | rename remote_close real_remote_close |
| 5672 | |
| 5673 | global gdb_transcript |
| 5674 | set gdb_transcript "" |
| 5675 | |
| 5676 | global gdb_trans_count |
| 5677 | set gdb_trans_count 1 |
| 5678 | |
| 5679 | proc remote_spawn {args} { |
| 5680 | global gdb_transcript gdb_trans_count outdir |
| 5681 | |
| 5682 | if {$gdb_transcript != ""} { |
| 5683 | close $gdb_transcript |
| 5684 | } |
| 5685 | set gdb_transcript [open [file join $outdir transcript.$gdb_trans_count] w] |
| 5686 | puts $gdb_transcript [lindex $args 1] |
| 5687 | incr gdb_trans_count |
| 5688 | |
| 5689 | return [uplevel real_remote_spawn $args] |
| 5690 | } |
| 5691 | |
| 5692 | proc remote_close {args} { |
| 5693 | global gdb_transcript |
| 5694 | |
| 5695 | if {$gdb_transcript != ""} { |
| 5696 | close $gdb_transcript |
| 5697 | set gdb_transcript "" |
| 5698 | } |
| 5699 | |
| 5700 | return [uplevel real_remote_close $args] |
| 5701 | } |
| 5702 | |
| 5703 | proc send_gdb {args} { |
| 5704 | global gdb_transcript |
| 5705 | |
| 5706 | if {$gdb_transcript != ""} { |
| 5707 | puts -nonewline $gdb_transcript [lindex $args 0] |
| 5708 | } |
| 5709 | |
| 5710 | return [uplevel real_send_gdb $args] |
| 5711 | } |
| 5712 | } |
| 5713 | |
| 5714 | # If GDB_PARALLEL exists, then set up the parallel-mode directories. |
| 5715 | if {[info exists GDB_PARALLEL]} { |
| 5716 | if {[is_remote host]} { |
| 5717 | unset GDB_PARALLEL |
| 5718 | } else { |
| 5719 | file mkdir \ |
| 5720 | [make_gdb_parallel_path outputs] \ |
| 5721 | [make_gdb_parallel_path temp] \ |
| 5722 | [make_gdb_parallel_path cache] |
| 5723 | } |
| 5724 | } |
| 5725 | |
| 5726 | proc core_find {binfile {deletefiles {}} {arg ""}} { |
| 5727 | global objdir subdir |
| 5728 | |
| 5729 | set destcore "$binfile.core" |
| 5730 | file delete $destcore |
| 5731 | |
| 5732 | # Create a core file named "$destcore" rather than just "core", to |
| 5733 | # avoid problems with sys admin types that like to regularly prune all |
| 5734 | # files named "core" from the system. |
| 5735 | # |
| 5736 | # Arbitrarily try setting the core size limit to "unlimited" since |
| 5737 | # this does not hurt on systems where the command does not work and |
| 5738 | # allows us to generate a core on systems where it does. |
| 5739 | # |
| 5740 | # Some systems append "core" to the name of the program; others append |
| 5741 | # the name of the program to "core"; still others (like Linux, as of |
| 5742 | # May 2003) create cores named "core.PID". In the latter case, we |
| 5743 | # could have many core files lying around, and it may be difficult to |
| 5744 | # tell which one is ours, so let's run the program in a subdirectory. |
| 5745 | set found 0 |
| 5746 | set coredir [standard_output_file coredir.[getpid]] |
| 5747 | file mkdir $coredir |
| 5748 | catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\"" |
| 5749 | # remote_exec host "${binfile}" |
| 5750 | foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" { |
| 5751 | if [remote_file build exists $i] { |
| 5752 | remote_exec build "mv $i $destcore" |
| 5753 | set found 1 |
| 5754 | } |
| 5755 | } |
| 5756 | # Check for "core.PID". |
| 5757 | if { $found == 0 } { |
| 5758 | set names [glob -nocomplain -directory $coredir core.*] |
| 5759 | if {[llength $names] == 1} { |
| 5760 | set corefile [file join $coredir [lindex $names 0]] |
| 5761 | remote_exec build "mv $corefile $destcore" |
| 5762 | set found 1 |
| 5763 | } |
| 5764 | } |
| 5765 | if { $found == 0 } { |
| 5766 | # The braindamaged HPUX shell quits after the ulimit -c above |
| 5767 | # without executing ${binfile}. So we try again without the |
| 5768 | # ulimit here if we didn't find a core file above. |
| 5769 | # Oh, I should mention that any "braindamaged" non-Unix system has |
| 5770 | # the same problem. I like the cd bit too, it's really neat'n stuff. |
| 5771 | catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\"" |
| 5772 | foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" { |
| 5773 | if [remote_file build exists $i] { |
| 5774 | remote_exec build "mv $i $destcore" |
| 5775 | set found 1 |
| 5776 | } |
| 5777 | } |
| 5778 | } |
| 5779 | |
| 5780 | # Try to clean up after ourselves. |
| 5781 | foreach deletefile $deletefiles { |
| 5782 | remote_file build delete [file join $coredir $deletefile] |
| 5783 | } |
| 5784 | remote_exec build "rmdir $coredir" |
| 5785 | |
| 5786 | if { $found == 0 } { |
| 5787 | warning "can't generate a core file - core tests suppressed - check ulimit -c" |
| 5788 | return "" |
| 5789 | } |
| 5790 | return $destcore |
| 5791 | } |
| 5792 | |
| 5793 | # gdb_target_symbol_prefix compiles a test program and then examines |
| 5794 | # the output from objdump to determine the prefix (such as underscore) |
| 5795 | # for linker symbol prefixes. |
| 5796 | |
| 5797 | gdb_caching_proc gdb_target_symbol_prefix { |
| 5798 | # Set up and compile a simple test program... |
| 5799 | set src [standard_temp_file main[pid].c] |
| 5800 | set exe [standard_temp_file main[pid].x] |
| 5801 | |
| 5802 | gdb_produce_source $src { |
| 5803 | int main() { |
| 5804 | return 0; |
| 5805 | } |
| 5806 | } |
| 5807 | |
| 5808 | verbose "compiling testfile $src" 2 |
| 5809 | set compile_flags {debug nowarnings quiet} |
| 5810 | set lines [gdb_compile $src $exe executable $compile_flags] |
| 5811 | |
| 5812 | set prefix "" |
| 5813 | |
| 5814 | if ![string match "" $lines] then { |
| 5815 | verbose "gdb_target_symbol_prefix: testfile compilation failed, returning null prefix" 2 |
| 5816 | } else { |
| 5817 | set objdump_program [gdb_find_objdump] |
| 5818 | set result [catch "exec $objdump_program --syms $exe" output] |
| 5819 | |
| 5820 | if { $result == 0 \ |
| 5821 | && ![regexp -lineanchor \ |
| 5822 | { ([^ a-zA-Z0-9]*)main$} $output dummy prefix] } { |
| 5823 | verbose "gdb_target_symbol_prefix: Could not find main in objdump output; returning null prefix" 2 |
| 5824 | } |
| 5825 | } |
| 5826 | |
| 5827 | file delete $src |
| 5828 | file delete $exe |
| 5829 | |
| 5830 | return $prefix |
| 5831 | } |
| 5832 | |
| 5833 | # gdb_target_symbol returns the provided symbol with the correct prefix |
| 5834 | # prepended. (See gdb_target_symbol_prefix, above.) |
| 5835 | |
| 5836 | proc gdb_target_symbol { symbol } { |
| 5837 | set prefix [gdb_target_symbol_prefix] |
| 5838 | return "${prefix}${symbol}" |
| 5839 | } |
| 5840 | |
| 5841 | # gdb_target_symbol_prefix_flags_asm returns a string that can be |
| 5842 | # added to gdb_compile options to define the C-preprocessor macro |
| 5843 | # SYMBOL_PREFIX with a value that can be prepended to symbols |
| 5844 | # for targets which require a prefix, such as underscore. |
| 5845 | # |
| 5846 | # This version (_asm) defines the prefix without double quotes |
| 5847 | # surrounding the prefix. It is used to define the macro |
| 5848 | # SYMBOL_PREFIX for assembly language files. Another version, below, |
| 5849 | # is used for symbols in inline assembler in C/C++ files. |
| 5850 | # |
| 5851 | # The lack of quotes in this version (_asm) makes it possible to |
| 5852 | # define supporting macros in the .S file. (The version which |
| 5853 | # uses quotes for the prefix won't work for such files since it's |
| 5854 | # impossible to define a quote-stripping macro in C.) |
| 5855 | # |
| 5856 | # It's possible to use this version (_asm) for C/C++ source files too, |
| 5857 | # but a string is usually required in such files; providing a version |
| 5858 | # (no _asm) which encloses the prefix with double quotes makes it |
| 5859 | # somewhat easier to define the supporting macros in the test case. |
| 5860 | |
| 5861 | proc gdb_target_symbol_prefix_flags_asm {} { |
| 5862 | set prefix [gdb_target_symbol_prefix] |
| 5863 | if {$prefix ne ""} { |
| 5864 | return "additional_flags=-DSYMBOL_PREFIX=$prefix" |
| 5865 | } else { |
| 5866 | return ""; |
| 5867 | } |
| 5868 | } |
| 5869 | |
| 5870 | # gdb_target_symbol_prefix_flags returns the same string as |
| 5871 | # gdb_target_symbol_prefix_flags_asm, above, but with the prefix |
| 5872 | # enclosed in double quotes if there is a prefix. |
| 5873 | # |
| 5874 | # See the comment for gdb_target_symbol_prefix_flags_asm for an |
| 5875 | # extended discussion. |
| 5876 | |
| 5877 | proc gdb_target_symbol_prefix_flags {} { |
| 5878 | set prefix [gdb_target_symbol_prefix] |
| 5879 | if {$prefix ne ""} { |
| 5880 | return "additional_flags=-DSYMBOL_PREFIX=\"$prefix\"" |
| 5881 | } else { |
| 5882 | return ""; |
| 5883 | } |
| 5884 | } |
| 5885 | |
| 5886 | # A wrapper for 'remote_exec host' that passes or fails a test. |
| 5887 | # Returns 0 if all went well, nonzero on failure. |
| 5888 | # TEST is the name of the test, other arguments are as for remote_exec. |
| 5889 | |
| 5890 | proc run_on_host { test program args } { |
| 5891 | verbose -log "run_on_host: $program $args" |
| 5892 | # remote_exec doesn't work properly if the output is set but the |
| 5893 | # input is the empty string -- so replace an empty input with |
| 5894 | # /dev/null. |
| 5895 | if {[llength $args] > 1 && [lindex $args 1] == ""} { |
| 5896 | set args [lreplace $args 1 1 "/dev/null"] |
| 5897 | } |
| 5898 | set result [eval remote_exec host [list $program] $args] |
| 5899 | verbose "result is $result" |
| 5900 | set status [lindex $result 0] |
| 5901 | set output [lindex $result 1] |
| 5902 | if {$status == 0} { |
| 5903 | pass $test |
| 5904 | return 0 |
| 5905 | } else { |
| 5906 | verbose -log "run_on_host failed: $output" |
| 5907 | fail $test |
| 5908 | return -1 |
| 5909 | } |
| 5910 | } |
| 5911 | |
| 5912 | # Return non-zero if "board_info debug_flags" mentions Fission. |
| 5913 | # http://gcc.gnu.org/wiki/DebugFission |
| 5914 | # Fission doesn't support everything yet. |
| 5915 | # This supports working around bug 15954. |
| 5916 | |
| 5917 | proc using_fission { } { |
| 5918 | set debug_flags [board_info [target_info name] debug_flags] |
| 5919 | return [regexp -- "-gsplit-dwarf" $debug_flags] |
| 5920 | } |
| 5921 | |
| 5922 | # Search the caller's ARGS list and set variables according to the list of |
| 5923 | # valid options described by ARGSET. |
| 5924 | # |
| 5925 | # The first member of each one- or two-element list in ARGSET defines the |
| 5926 | # name of a variable that will be added to the caller's scope. |
| 5927 | # |
| 5928 | # If only one element is given to describe an option, it the value is |
| 5929 | # 0 if the option is not present in (the caller's) ARGS or 1 if |
| 5930 | # it is. |
| 5931 | # |
| 5932 | # If two elements are given, the second element is the default value of |
| 5933 | # the variable. This is then overwritten if the option exists in ARGS. |
| 5934 | # |
| 5935 | # Any parse_args elements in (the caller's) ARGS will be removed, leaving |
| 5936 | # any optional components. |
| 5937 | |
| 5938 | # Example: |
| 5939 | # proc myproc {foo args} { |
| 5940 | # parse_args {{bar} {baz "abc"} {qux}} |
| 5941 | # # ... |
| 5942 | # } |
| 5943 | # myproc ABC -bar -baz DEF peanut butter |
| 5944 | # will define the following variables in myproc: |
| 5945 | # foo (=ABC), bar (=1), baz (=DEF), and qux (=0) |
| 5946 | # args will be the list {peanut butter} |
| 5947 | |
| 5948 | proc parse_args { argset } { |
| 5949 | upvar args args |
| 5950 | |
| 5951 | foreach argument $argset { |
| 5952 | if {[llength $argument] == 1} { |
| 5953 | # No default specified, so we assume that we should set |
| 5954 | # the value to 1 if the arg is present and 0 if it's not. |
| 5955 | # It is assumed that no value is given with the argument. |
| 5956 | set result [lsearch -exact $args "-$argument"] |
| 5957 | if {$result != -1} then { |
| 5958 | uplevel 1 [list set $argument 1] |
| 5959 | set args [lreplace $args $result $result] |
| 5960 | } else { |
| 5961 | uplevel 1 [list set $argument 0] |
| 5962 | } |
| 5963 | } elseif {[llength $argument] == 2} { |
| 5964 | # There are two items in the argument. The second is a |
| 5965 | # default value to use if the item is not present. |
| 5966 | # Otherwise, the variable is set to whatever is provided |
| 5967 | # after the item in the args. |
| 5968 | set arg [lindex $argument 0] |
| 5969 | set result [lsearch -exact $args "-[lindex $arg 0]"] |
| 5970 | if {$result != -1} then { |
| 5971 | uplevel 1 [list set $arg [lindex $args [expr $result+1]]] |
| 5972 | set args [lreplace $args $result [expr $result+1]] |
| 5973 | } else { |
| 5974 | uplevel 1 [list set $arg [lindex $argument 1]] |
| 5975 | } |
| 5976 | } else { |
| 5977 | error "Badly formatted argument \"$argument\" in argument set" |
| 5978 | } |
| 5979 | } |
| 5980 | |
| 5981 | # The remaining args should be checked to see that they match the |
| 5982 | # number of items expected to be passed into the procedure... |
| 5983 | } |
| 5984 | |
| 5985 | # Capture the output of COMMAND in a string ignoring PREFIX (a regexp); |
| 5986 | # return that string. |
| 5987 | |
| 5988 | proc capture_command_output { command prefix } { |
| 5989 | global gdb_prompt |
| 5990 | global expect_out |
| 5991 | |
| 5992 | set output_string "" |
| 5993 | gdb_test_multiple "$command" "capture_command_output for $command" { |
| 5994 | -re "[string_to_regexp ${command}]\[\r\n\]+${prefix}(.*)\[\r\n\]+$gdb_prompt $" { |
| 5995 | set output_string $expect_out(1,string) |
| 5996 | } |
| 5997 | } |
| 5998 | return $output_string |
| 5999 | } |
| 6000 | |
| 6001 | # A convenience function that joins all the arguments together, with a |
| 6002 | # regexp that matches exactly one end of line in between each argument. |
| 6003 | # This function is ideal to write the expected output of a GDB command |
| 6004 | # that generates more than a couple of lines, as this allows us to write |
| 6005 | # each line as a separate string, which is easier to read by a human |
| 6006 | # being. |
| 6007 | |
| 6008 | proc multi_line { args } { |
| 6009 | return [join $args "\r\n"] |
| 6010 | } |
| 6011 | |
| 6012 | # Similar to the above, but while multi_line is meant to be used to |
| 6013 | # match GDB output, this one is meant to be used to build strings to |
| 6014 | # send as GDB input. |
| 6015 | |
| 6016 | proc multi_line_input { args } { |
| 6017 | return [join $args "\n"] |
| 6018 | } |
| 6019 | |
| 6020 | |
| 6021 | # Always load compatibility stuff. |
| 6022 | load_lib future.exp |