| 1 | # Copyright (C) 2014-2018 Free Software Foundation, Inc. |
| 2 | # |
| 3 | # Copying and distribution of this file, with or without modification, |
| 4 | # are permitted in any medium without royalty provided the copyright |
| 5 | # notice and this notice are preserved. |
| 6 | # |
| 7 | # Unusual variables checked by this code: |
| 8 | # NOP - four byte opcode for no-op (defaults to 0) |
| 9 | # DATA_ADDR - if end-of-text-plus-one-page isn't right for data start |
| 10 | # INITIAL_READONLY_SECTIONS - at start of data segment |
| 11 | # OTHER_READONLY_SECTIONS - other than .text .init .rodata ... |
| 12 | # (e.g., .PARISC.milli) |
| 13 | # OTHER_TEXT_SECTIONS - these get put in .text when relocating |
| 14 | # OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... |
| 15 | # (e.g., .PARISC.global) |
| 16 | # OTHER_SECTIONS - at the end |
| 17 | # EXECUTABLE_SYMBOLS - symbols that must be defined for an |
| 18 | # executable (e.g., _DYNAMIC_LINK) |
| 19 | # TEXT_START_SYMBOLS - symbols that appear at the start of the |
| 20 | # .text section. |
| 21 | # DATA_START_SYMBOLS - symbols that appear at the start of the |
| 22 | # .data section. |
| 23 | # OTHER_GOT_SYMBOLS - symbols defined just before .got. |
| 24 | # OTHER_GOT_SECTIONS - sections just after .got. |
| 25 | # OTHER_SDATA_SECTIONS - sections just after .sdata. |
| 26 | # OTHER_BSS_SYMBOLS - symbols that appear at the start of the |
| 27 | # .bss section besides __bss_start. |
| 28 | # DATA_PLT - .plt should be in data segment, not text segment. |
| 29 | # BSS_PLT - .plt should be in bss segment |
| 30 | # TEXT_DYNAMIC - .dynamic in text segment, not data segment. |
| 31 | # EMBEDDED - whether this is for an embedded system. |
| 32 | # SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set |
| 33 | # start address of shared library. |
| 34 | # INPUT_FILES - INPUT command of files to always include |
| 35 | # WRITABLE_RODATA - if set, the .rodata section should be writable |
| 36 | # INIT_START, INIT_END - statements just before and just after |
| 37 | # combination of .init sections. |
| 38 | # FINI_START, FINI_END - statements just before and just after |
| 39 | # combination of .fini sections. |
| 40 | # |
| 41 | # When adding sections, do note that the names of some sections are used |
| 42 | # when specifying the start address of the next. |
| 43 | # |
| 44 | |
| 45 | # Many sections come in three flavours. There is the 'real' section, |
| 46 | # like ".data". Then there are the per-procedure or per-variable |
| 47 | # sections, generated by -ffunction-sections and -fdata-sections in GCC, |
| 48 | # and useful for --gc-sections, which for a variable "foo" might be |
| 49 | # ".data.foo". Then there are the linkonce sections, for which the linker |
| 50 | # eliminates duplicates, which are named like ".gnu.linkonce.d.foo". |
| 51 | # The exact correspondences are: |
| 52 | # |
| 53 | # Section Linkonce section |
| 54 | # .text .gnu.linkonce.t.foo |
| 55 | # .rodata .gnu.linkonce.r.foo |
| 56 | # .data .gnu.linkonce.d.foo |
| 57 | # .bss .gnu.linkonce.b.foo |
| 58 | # .sdata .gnu.linkonce.s.foo |
| 59 | # .sbss .gnu.linkonce.sb.foo |
| 60 | # .sdata2 .gnu.linkonce.s2.foo |
| 61 | # .sbss2 .gnu.linkonce.sb2.foo |
| 62 | # |
| 63 | # Each of these can also have corresponding .rel.* and .rela.* sections. |
| 64 | |
| 65 | test -z "$ENTRY" && ENTRY=_start |
| 66 | test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 67 | test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
| 68 | if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi |
| 69 | test -z "${ELFSIZE}" && ELFSIZE=32 |
| 70 | test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" |
| 71 | test "$LD_FLAG" = "N" && DATA_ADDR=. |
| 72 | INTERP=".interp ${RELOCATING-0} : { *(.interp) }" |
| 73 | PLT=".plt ${RELOCATING-0} : { *(.plt) }" |
| 74 | DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }" |
| 75 | RODATA=".rodata ${RELOCATING-0} : { *(.rodata) ${RELOCATING+*(.rodata.*)} ${RELOCATING+*(.gnu.linkonce.r.*)} }" |
| 76 | SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2) ${RELOCATING+*(.sbss2.*)} ${RELOCATING+*(.gnu.linkonce.sb2.*)} }" |
| 77 | SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2) ${RELOCATING+*(.sdata2.*)} ${RELOCATING+*(.gnu.linkonce.s2.*)} }" |
| 78 | CTOR=".ctors ${CONSTRUCTING-0} : |
| 79 | { |
| 80 | ${CONSTRUCTING+${CTOR_START}} |
| 81 | /* gcc uses crtbegin.o to find the start of |
| 82 | the constructors, so we make sure it is |
| 83 | first. Because this is a wildcard, it |
| 84 | doesn't matter if the user does not |
| 85 | actually link against crtbegin.o; the |
| 86 | linker won't look for a file to match a |
| 87 | wildcard. The wildcard also means that it |
| 88 | doesn't matter which directory crtbegin.o |
| 89 | is in. */ |
| 90 | |
| 91 | KEEP (*crtbegin.o(.ctors)) |
| 92 | KEEP (*crtbegin?.o(.ctors)) |
| 93 | |
| 94 | /* We don't want to include the .ctor section from |
| 95 | the crtend.o file until after the sorted ctors. |
| 96 | The .ctor section from the crtend file contains the |
| 97 | end of ctors marker and it must be last */ |
| 98 | |
| 99 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors)) |
| 100 | KEEP (*(SORT(.ctors.*))) |
| 101 | KEEP (*(.ctors)) |
| 102 | ${CONSTRUCTING+${CTOR_END}} |
| 103 | }" |
| 104 | |
| 105 | DTOR=" .dtors ${CONSTRUCTING-0} : |
| 106 | { |
| 107 | ${CONSTRUCTING+${DTOR_START}} |
| 108 | KEEP (*crtbegin.o(.dtors)) |
| 109 | KEEP (*crtbegin?.o(.dtors)) |
| 110 | KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors)) |
| 111 | KEEP (*(SORT(.dtors.*))) |
| 112 | KEEP (*(.dtors)) |
| 113 | ${CONSTRUCTING+${DTOR_END}} |
| 114 | }" |
| 115 | |
| 116 | # If this is for an embedded system, don't add SIZEOF_HEADERS. |
| 117 | if [ -z "$EMBEDDED" ]; then |
| 118 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" |
| 119 | else |
| 120 | test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" |
| 121 | fi |
| 122 | |
| 123 | cat <<EOF |
| 124 | /* Copyright (C) 2014-2018 Free Software Foundation, Inc. |
| 125 | |
| 126 | Copying and distribution of this script, with or without modification, |
| 127 | are permitted in any medium without royalty provided the copyright |
| 128 | notice and this notice are preserved. */ |
| 129 | |
| 130 | OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", |
| 131 | "${LITTLE_OUTPUT_FORMAT}") |
| 132 | OUTPUT_ARCH(${OUTPUT_ARCH}) |
| 133 | ${RELOCATING+ENTRY(${ENTRY})} |
| 134 | |
| 135 | ${RELOCATING+${LIB_SEARCH_DIRS}} |
| 136 | ${RELOCATING+/* Do we need any of these for elf? |
| 137 | __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} |
| 138 | ${RELOCATING+${EXECUTABLE_SYMBOLS}} |
| 139 | ${RELOCATING+${INPUT_FILES}} |
| 140 | ${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
| 141 | if gld -r is used and the intermediate file has sections starting |
| 142 | at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld |
| 143 | bug. But for now assigning the zero vmas works. */} |
| 144 | |
| 145 | SECTIONS |
| 146 | { |
| 147 | ${CREATE_SHLIB-${RELOCATING+. = ${TEXT_BASE_ADDRESS};}} |
| 148 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
| 149 | ${CREATE_SHLIB-${INTERP}} |
| 150 | ${TEXT_DYNAMIC+${DYNAMIC}} |
| 151 | |
| 152 | EOF |
| 153 | if [ "x$COMBRELOC" = x ]; then |
| 154 | COMBRELOCCAT=cat |
| 155 | else |
| 156 | COMBRELOCCAT="cat > $COMBRELOC" |
| 157 | fi |
| 158 | eval $COMBRELOCCAT <<EOF |
| 159 | .rel.init ${RELOCATING-0} : { *(.rel.init) } |
| 160 | .rela.init ${RELOCATING-0} : { *(.rela.init) } |
| 161 | .rel.text ${RELOCATING-0} : |
| 162 | { |
| 163 | *(.rel.text) |
| 164 | ${RELOCATING+*(.rel.text.*)} |
| 165 | ${RELOCATING+*(.rel.gnu.linkonce.t.*)} |
| 166 | } |
| 167 | .rela.text ${RELOCATING-0} : |
| 168 | { |
| 169 | *(.rela.text) |
| 170 | ${RELOCATING+*(.rela.text.*)} |
| 171 | ${RELOCATING+*(.rela.gnu.linkonce.t.*)} |
| 172 | } |
| 173 | .rel.fini ${RELOCATING-0} : { *(.rel.fini) } |
| 174 | .rela.fini ${RELOCATING-0} : { *(.rela.fini) } |
| 175 | .rel.rodata ${RELOCATING-0} : |
| 176 | { |
| 177 | *(.rel.rodata) |
| 178 | ${RELOCATING+*(.rel.rodata.*)} |
| 179 | ${RELOCATING+*(.rel.gnu.linkonce.r.*)} |
| 180 | } |
| 181 | .rela.rodata ${RELOCATING-0} : |
| 182 | { |
| 183 | *(.rela.rodata) |
| 184 | ${RELOCATING+*(.rela.rodata.*)} |
| 185 | ${RELOCATING+*(.rela.gnu.linkonce.r.*)} |
| 186 | } |
| 187 | ${OTHER_READONLY_RELOC_SECTIONS} |
| 188 | .rel.data ${RELOCATING-0} : |
| 189 | { |
| 190 | *(.rel.data) |
| 191 | ${RELOCATING+*(.rel.data.*)} |
| 192 | ${RELOCATING+*(.rel.gnu.linkonce.d.*)} |
| 193 | } |
| 194 | .rela.data ${RELOCATING-0} : |
| 195 | { |
| 196 | *(.rela.data) |
| 197 | ${RELOCATING+*(.rela.data.*)} |
| 198 | ${RELOCATING+*(.rela.gnu.linkonce.d.*)} |
| 199 | } |
| 200 | .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } |
| 201 | .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } |
| 202 | .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } |
| 203 | .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } |
| 204 | .rel.got ${RELOCATING-0} : { *(.rel.got) } |
| 205 | .rela.got ${RELOCATING-0} : { *(.rela.got) } |
| 206 | ${OTHER_GOT_RELOC_SECTIONS} |
| 207 | .rel.sdata ${RELOCATING-0} : |
| 208 | { |
| 209 | *(.rel.sdata) |
| 210 | ${RELOCATING+*(.rel.sdata.*)} |
| 211 | ${RELOCATING+*(.rel.gnu.linkonce.s.*)} |
| 212 | } |
| 213 | .rela.sdata ${RELOCATING-0} : |
| 214 | { |
| 215 | *(.rela.sdata) |
| 216 | ${RELOCATING+*(.rela.sdata.*)} |
| 217 | ${RELOCATING+*(.rela.gnu.linkonce.s.*)} |
| 218 | } |
| 219 | .rel.sbss ${RELOCATING-0} : |
| 220 | { |
| 221 | *(.rel.sbss) |
| 222 | ${RELOCATING+*(.rel.sbss.*)} |
| 223 | ${RELOCATING+*(.rel.gnu.linkonce.sb.*)} |
| 224 | } |
| 225 | .rela.sbss ${RELOCATING-0} : |
| 226 | { |
| 227 | *(.rela.sbss) |
| 228 | ${RELOCATING+*(.rela.sbss.*)} |
| 229 | ${RELOCATING+*(.rela.gnu.linkonce.sb.*)} |
| 230 | } |
| 231 | .rel.sdata2 ${RELOCATING-0} : |
| 232 | { |
| 233 | *(.rel.sdata2) |
| 234 | ${RELOCATING+*(.rel.sdata2.*)} |
| 235 | ${RELOCATING+*(.rel.gnu.linkonce.s2.*)} |
| 236 | } |
| 237 | .rela.sdata2 ${RELOCATING-0} : |
| 238 | { |
| 239 | *(.rela.sdata2) |
| 240 | ${RELOCATING+*(.rela.sdata2.*)} |
| 241 | ${RELOCATING+*(.rela.gnu.linkonce.s2.*)} |
| 242 | } |
| 243 | .rel.sbss2 ${RELOCATING-0} : |
| 244 | { |
| 245 | *(.rel.sbss2) |
| 246 | ${RELOCATING+*(.rel.sbss2.*)} |
| 247 | ${RELOCATING+*(.rel.gnu.linkonce.sb2.*)} |
| 248 | } |
| 249 | .rela.sbss2 ${RELOCATING-0} : |
| 250 | { |
| 251 | *(.rela.sbss2) |
| 252 | ${RELOCATING+*(.rela.sbss2.*)} |
| 253 | ${RELOCATING+*(.rela.gnu.linkonce.sb2.*)} |
| 254 | } |
| 255 | .rel.bss ${RELOCATING-0} : |
| 256 | { |
| 257 | *(.rel.bss) |
| 258 | ${RELOCATING+*(.rel.bss.*)} |
| 259 | ${RELOCATING+*(.rel.gnu.linkonce.b.*)} |
| 260 | } |
| 261 | .rela.bss ${RELOCATING-0} : |
| 262 | { |
| 263 | *(.rela.bss) |
| 264 | ${RELOCATING+*(.rela.bss.*)} |
| 265 | ${RELOCATING+*(.rela.gnu.linkonce.b.*)} |
| 266 | } |
| 267 | EOF |
| 268 | if [ -n "$COMBRELOC" ]; then |
| 269 | cat <<EOF |
| 270 | .rel.dyn : |
| 271 | { |
| 272 | EOF |
| 273 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC |
| 274 | cat <<EOF |
| 275 | } |
| 276 | .rela.dyn : |
| 277 | { |
| 278 | EOF |
| 279 | sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC |
| 280 | cat <<EOF |
| 281 | } |
| 282 | EOF |
| 283 | fi |
| 284 | cat <<EOF |
| 285 | .rel.plt ${RELOCATING-0} : { *(.rel.plt) } |
| 286 | .rela.plt ${RELOCATING-0} : { *(.rela.plt) } |
| 287 | ${OTHER_PLT_RELOC_SECTIONS} |
| 288 | |
| 289 | .init ${RELOCATING-0} : |
| 290 | { |
| 291 | ${RELOCATING+${INIT_START}} |
| 292 | KEEP (*(.init)) |
| 293 | ${RELOCATING+${INIT_END}} |
| 294 | } =${NOP-0} |
| 295 | |
| 296 | ${DATA_PLT-${BSS_PLT-${PLT}}} |
| 297 | .text ${RELOCATING-0} : |
| 298 | { |
| 299 | ${RELOCATING+${TEXT_START_SYMBOLS}} |
| 300 | *(.text) |
| 301 | ${RELOCATING+*(.text.*)} |
| 302 | *(.stub) |
| 303 | /* .gnu.warning sections are handled specially by elf32.em. */ |
| 304 | *(.gnu.warning) |
| 305 | ${RELOCATING+*(.gnu.linkonce.t.*)} |
| 306 | ${RELOCATING+${OTHER_TEXT_SECTIONS}} |
| 307 | } =${NOP-0} |
| 308 | .fini ${RELOCATING-0} : |
| 309 | { |
| 310 | ${RELOCATING+${FINI_START}} |
| 311 | KEEP (*(.fini)) |
| 312 | ${RELOCATING+${FINI_END}} |
| 313 | } =${NOP-0} |
| 314 | ${RELOCATING+PROVIDE (__etext = .);} |
| 315 | ${RELOCATING+PROVIDE (_etext = .);} |
| 316 | ${RELOCATING+PROVIDE (etext = .);} |
| 317 | |
| 318 | /* Adjust the address for the data segment. We want to adjust up to |
| 319 | the same address within the page on the next page up. */ |
| 320 | ${CREATE_SHLIB-${RELOCATING+. = ${DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}} |
| 321 | ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))};}} |
| 322 | |
| 323 | .data ${RELOCATING-0} : |
| 324 | { |
| 325 | ${RELOCATING+${DATA_START_SYMBOLS}} |
| 326 | *(.data) |
| 327 | ${RELOCATING+*(.data.*)} |
| 328 | ${RELOCATING+*(.gnu.linkonce.d.*)} |
| 329 | ${CONSTRUCTING+SORT(CONSTRUCTORS)} |
| 330 | } |
| 331 | .data1 ${RELOCATING-0} : { *(.data1) } |
| 332 | .eh_frame ${RELOCATING-0} : |
| 333 | { |
| 334 | ${RELOCATING+PROVIDE (__eh_frame_begin = .);} |
| 335 | *(.eh_frame) |
| 336 | LONG (0); |
| 337 | ${RELOCATING+PROVIDE (__eh_frame_end = .);} |
| 338 | } ${RELOCATING+} |
| 339 | .gcc_except_table : { *(.gcc_except_table) } |
| 340 | ${INITIAL_READONLY_SECTIONS} |
| 341 | .hash ${RELOCATING-0} : { *(.hash) } |
| 342 | .dynsym ${RELOCATING-0} : { *(.dynsym) } |
| 343 | .dynstr ${RELOCATING-0} : { *(.dynstr) } |
| 344 | .gnu.version ${RELOCATING-0} : { *(.gnu.version) } |
| 345 | .gnu.version_d ${RELOCATING-0} : { *(.gnu.version_d) } |
| 346 | .gnu.version_r ${RELOCATING-0} : { *(.gnu.version_r) } |
| 347 | ${RODATA} |
| 348 | .rodata1 ${RELOCATING-0} : { *(.rodata1) } |
| 349 | ${CREATE_SHLIB-${SDATA2}} |
| 350 | ${CREATE_SHLIB-${SBSS2}} |
| 351 | ${RELOCATING+${OTHER_READONLY_SECTIONS}} |
| 352 | ${RELOCATING+${OTHER_READWRITE_SECTIONS}} |
| 353 | ${TEXT_DYNAMIC-${DYNAMIC}} |
| 354 | ${RELOCATING+${CTOR}} |
| 355 | ${RELOCATING+${DTOR}} |
| 356 | .jcr : { KEEP (*(.jcr)) } |
| 357 | ${DATA_PLT+${PLT}} |
| 358 | ${RELOCATING+${OTHER_GOT_SYMBOLS}} |
| 359 | .got ${RELOCATING-0} : { *(.got.plt) *(.got) } |
| 360 | ${RELOCATING+${OTHER_GOT_SECTIONS}} |
| 361 | ${CREATE_SHLIB+${SDATA2}} |
| 362 | ${CREATE_SHLIB+${SBSS2}} |
| 363 | /* We want the small data sections together, so single-instruction offsets |
| 364 | can access them all, and initialized data all before uninitialized, so |
| 365 | we can shorten the on-disk segment size. */ |
| 366 | .sdata ${RELOCATING-0} : |
| 367 | { |
| 368 | ${RELOCATING+${SDATA_START_SYMBOLS}} |
| 369 | *(.sdata) |
| 370 | ${RELOCATING+*(.sdata.*)} |
| 371 | ${RELOCATING+*(.gnu.linkonce.s.*)} |
| 372 | } |
| 373 | ${RELOCATING+${OTHER_SDATA_SECTIONS}} |
| 374 | ${RELOCATING+_edata = .;} |
| 375 | ${RELOCATING+PROVIDE (edata = .);} |
| 376 | ${RELOCATING+__bss_start = .;} |
| 377 | ${RELOCATING+${OTHER_BSS_SYMBOLS}} |
| 378 | .sbss ${RELOCATING-0} : |
| 379 | { |
| 380 | ${RELOCATING+PROVIDE (__sbss_start = .);} |
| 381 | ${RELOCATING+PROVIDE (___sbss_start = .);} |
| 382 | *(.dynsbss) |
| 383 | *(.sbss) |
| 384 | ${RELOCATING+*(.sbss.*)} |
| 385 | ${RELOCATING+*(.gnu.linkonce.sb.*)} |
| 386 | *(.scommon) |
| 387 | ${RELOCATING+PROVIDE (__sbss_end = .);} |
| 388 | ${RELOCATING+PROVIDE (___sbss_end = .);} |
| 389 | } |
| 390 | ${BSS_PLT+${PLT}} |
| 391 | .bss ${RELOCATING-0} : |
| 392 | { |
| 393 | *(.dynbss) |
| 394 | *(.bss) |
| 395 | ${RELOCATING+*(.bss.*)} |
| 396 | ${RELOCATING+*(.gnu.linkonce.b.*)} |
| 397 | *(COMMON) |
| 398 | /* Align here to ensure that the .bss section occupies space up to |
| 399 | _end. Align after .bss to ensure correct alignment even if the |
| 400 | .bss section disappears because there are no input sections. */ |
| 401 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 402 | } |
| 403 | ${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
| 404 | ${RELOCATING+. = ALIGN(${ALIGNMENT});} |
| 405 | ${RELOCATING+${OTHER_END_SYMBOLS}} |
| 406 | ${RELOCATING+_end = .;} |
| 407 | ${RELOCATING+PROVIDE (end = .);} |
| 408 | |
| 409 | /* Stabs debugging sections. */ |
| 410 | .stab 0 : { *(.stab) } |
| 411 | .stabstr 0 : { *(.stabstr) } |
| 412 | .stab.excl 0 : { *(.stab.excl) } |
| 413 | .stab.exclstr 0 : { *(.stab.exclstr) } |
| 414 | .stab.index 0 : { *(.stab.index) } |
| 415 | .stab.indexstr 0 : { *(.stab.indexstr) } |
| 416 | |
| 417 | .comment 0 : { *(.comment) } |
| 418 | |
| 419 | EOF |
| 420 | |
| 421 | . $srcdir/scripttempl/DWARF.sc |
| 422 | |
| 423 | cat <<EOF |
| 424 | ${RELOCATING+${OTHER_RELOCATING_SECTIONS}} |
| 425 | |
| 426 | /* These must appear regardless of ${RELOCATING}. */ |
| 427 | ${OTHER_SECTIONS} |
| 428 | } |
| 429 | EOF |