Cleanups after the update to Autoconf 2.64, Automake 1.11.
[deliverable/binutils-gdb.git] / opcodes / ChangeLog
... / ...
CommitLineData
12009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
2
3 * Makefile.am (install-pdf, install-html): Remove.
4 * Makefile.in: Regenerate.
5
6 * Makefile.in: Regenerate.
7 * aclocal.m4: Likewise.
8 * config.in: Likewise.
9 * configure: Likewise.
10
112009-08-06 Michael Eager <eager@eagercon.com>
12
13 * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
14 CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
15 * Makefile.in: Regenerate.
16 * configure.in: Add bfd_microblaze_arch target.
17 * configure: Regenerate.
18 * disassemble.c: Define ARCH_microblaze, return
19 print_insn_microblaze().
20 * microblaze-dis.c: New MicroBlaze disassembler.
21 * microblaze-opc.h: New MicroBlaze opcode definitions.
22 * microblaze-opcm.h: New MicroBlaze opcode types.
23
242009-07-25 H.J. Lu <hongjiu.lu@intel.com>
25
26 * configure.in: Handle bfd_l1om_arch.
27 * disassemble.c (disassembler): Likewise.
28
29 * configure: Regenerated.
30
31 * i386-dis.c (print_insn): Handle bfd_mach_l1om and
32 bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM.
33
34 * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
35 Add CPU_L1OM_FLAGS.
36 (cpu_flags): Add CpuL1OM.
37 (set_bitfield): Take an argument to set the value field.
38 (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
39 (process_i386_opcode_modifier): Updated.
40 (process_i386_operand_type): Likewise.
41 * i386-init.h: Regenerated.
42 * i386-tbl.h: Likewise.
43
44 * i386-opc.h (CpuL1OM): New.
45 (CpuXsave): Updated.
46 (i386_cpu_flags): Add cpul1om.
47
482009-07-24 Jan Beulich <jbeulich@novell.com>
49
50 * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
51 frstpm.
52 * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
53 (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
54 (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
55 * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
56 Define.
57 (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
58 and cpufisttp.
59 * i386-opc.tbl: Qualify floating point instructions by their
60 respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
61 and fsincos to be avilable only on 387. Fix fstsw ax to be
62 available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
63 and frstpm.
64 * i386-init.h, i386-tbl.h: Regenerate.
65
662009-07-20 Nick Clifton <nickc@redhat.com>
67
68 PR 10288
69 * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
70 offset or indexed based addressing mode 3.
71
722009-07-14 Nick Clifton <nickc@redhat.com>
73
74 PR 10288
75 * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
76 patterns.
77 (arm_decode_shift): Catch illegal register based shifts.
78 (print_insn_arm): Properly handle negative register r0
79 post-indexed addressing.
80
812009-07-10 Doug Kwan <dougkwan@google.com>
82
83 * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only
84 lower 32 bits of long types to make hexadecimal output consistent
85 on both 32-bit and 64-bit hosts.
86
872009-07-10 Alan Modra <amodra@bigpond.net.au>
88
89 * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
90 * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
91 * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
92 * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
93 * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
94 * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
95 * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
96 * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
97 * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
98 * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
99 * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
100 * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
101
1022009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw>
103
104 * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
105
1062009-07-07 Nick Clifton <nickc@redhat.com>
107
108 PR 10288
109 * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
110 addressing modes.
111
1122009-07-06 DJ Delorie <dj@redhat.com>
113
114 * mep-desc.c: Regenerate.
115 * mep-desc.h: Regenerate.
116 * mep-opc.c: Regenerate.
117 * mep-opc.h: Regenerate.
118
1192009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
120
121 * i386-opc.h (CpuFMA4): Add CpuFMA4.
122 (i386_cpu_flags): New.
123 * i386-gen.c: Add CPU_FMA4_FLAGS.
124 * i386-opc.tbl: Add FMA4 instructions.
125 * i386-tbl.h: Regenerate.
126 * i386-init.h: Regenerate.
127 * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
128 (OP_XMM_VexW): Ditto.
129 (OP_EX_VexW): Ditto.
130 (VEXI4_Fixup): Ditto.
131 (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
132 (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
133 (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
134 (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
135 (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
136 (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
137 (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
138 (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
139 (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
140 (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
141 (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
142 (get_vex_imm8): New. handle FMA4.
143 (OP_EX_VexReg): Ditto.
144
1452009-06-30 Nick Clifton <nickc@redhat.com>
146
147 PR 10288
148 * arm-dis.c (coprocessor): Print the LDC and STC versions of the
149 LFM and SFM instructions as comments,.
150 Improve consistency of formatting for instructions displayed as
151 comments and decimal values displayed with their hexadecimal
152 equivalents.
153 Formatting tidy ups.
154
1552009-06-29 Nick Clifton <nickc@redhat.com>
156
157 PR 10288
158 * arm-dis.c (enum opcode_sentinels): New: Used to mark the
159 boundary between variaant and generic coprocessor instuctions.
160 (coprocessor): Use it.
161 Fix architecture version of MCRR and MRRC instructions.
162 (arm_opcdes): Fix patterns for STRB and STRH instructions.
163 (print_insn_coprocessor): Check architecture and extension masks.
164 Print a hexadecimal version of any decimal constant that is
165 outside of the range of -16 to +32.
166 (print_arm_address): Add a return value of the offset used in the
167 adress, if it is worth printing a hexadecimal version of it.
168 (print_insn_neon): Print a hexadecimal version of any decimal
169 constant that is outside of the range of -16 to +32.
170 (print_insn_arm): Likewise.
171 (print_insn_thumb16): Likewise.
172 (print_insn_thumb32): Likewise.
173
174 PR 10297
175 * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
176 of an undefined instruction.
177 (arm_opcodes): Use it.
178 (thumb_opcod): Use it.
179 (thumb32_opc): Use it.
180
1812009-06-23 DJ Delorie <dj@redhat.com>
182
183 * mep-desc.c: Regenerate.
184 * mep-desc.h: Regenerate.
185 * mep-dis.c: Regenerate.
186 * mep-ibld.c: Regenerate.
187 * mep-opc.c: Regenerate.
188
189 * mep-asm.c: Regenerate.
190 * mep-opc.c: Regenerate.
191 * mep-opc.h: Regenerate.
192
1932009-06-22 Nick Clifton <nickc@redhat.com>
194
195 * po/fi.po: Updated Finish translation.
196
1972009-06-22 Alan Modra <amodra@bigpond.net.au>
198
199 * m32c-asm.c: Regenerate.
200
2012009-06-22 Alan Modra <amodra@bigpond.net.au>
202
203 * score-dis.c (print_insn_score48, print_insn_score32): Move default
204 case label to proper lexical block.
205 * score7-dis.c (print_insn_score32): Likewise.
206
2072009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com>
208
209 * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
210 MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
211 * s390-opc.txt (nopr, nop): Use new instruction format.
212
2132009-06-18 Nick Clifton <nickc@redhat.com>
214
215 PR 10288
216 * arm-dis.c (print_insn_coprocessor): Check that a user specified
217 ARM architecture supports the matched instruction.
218 (print_insn_arm): Likewise.
219 (select_arm_features): New function. Fills in the fields of an
220 arm_feature_set structure based on a given arm machine number.
221 (print_insn): Initialise an arm_feature_set structure.
222
2232009-06-16 Maciej W. Rozycki <macro@linux-mips.org>
224
225 * vax-dis.c (is_function_entry): Return success for synthetic
226 symbols too.
227 (is_plt_tail): New function.
228 (print_insn_vax): Decode PLT entry offset longword.
229
2302009-06-15 Nick Clifton <nickc@redhat.com>
231
232 PR 10186
233 * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
234 instruction.
235
236 PR 10173
237 * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
238
2392009-06-15 Nick Clifton <nickc@redhat.com>
240
241 PR 10263
242 * arm-dis.c (print_insn): Ignore is_data if the user has requested
243 the disassembly of data as well as instructions.
244
2452009-06-11 Doug Evans <dje@sebabeach.org>
246
247 * cgen.sh: Handle multiple simultaneous runs for parallel makes.
248
2492009-06-11 Anthony Green <green@moxielogic.com>
250
251 * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
252 (moxie_form3_opc_info): Add branch instructions.
253 * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
254 encoded instructions.
255
2562009-06-06 Anthony Green <green@moxielogic.com>
257
258 * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
259 * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
260
2612009-06-04 Alan Modra <amodra@bigpond.net.au>
262
263 * dep-in.sed: Don't use \n in replacement part of s command.
264 * Makefile.am (DEP1): LC_ALL for uniq.
265 * Makefile.in: Regenerate.
266
2672009-06-02 Nick Clifton <nickc@redhat.com>
268
269 * po/nl.po: Updated Dutch translation.
270
2712009-06-02 Tristan Gingold <gingold@adacore.com>
272
273 * ia64-gen.c (parse_resource_users, print_dependency_table,
274 add_dis_table_ent, finish_distable, insert_bit_table_ent,
275 add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
276 get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
277 insert_completer_entry, print_completer_entry, print_completer_table,
278 opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
279
2802009-05-28 DJ Delorie <dj@redhat.com>
281
282 * mep-asm.c: Regenerate.
283 * mep-desc.c: Regenerate.
284
2852009-05-26 DJ Delorie <dj@redhat.com>
286
287 * mep-asm.c: Regenerate.
288 * mep-desc.c: Regenerate.
289 * mep-desc.h: Regenerate.
290 * mep-dis.c: Regenerate.
291 * mep-ibld.c: Regenerate.
292 * mep-opc.c: Regenerate.
293 * mep-opc.h: Regenerate.
294
2952009-05-26 Nick Clifton <nickc@redhat.com>
296
297 * po/id.po: Updated Indonesian translation.
298 * po/opcodes.pot: Updated template file.
299
3002009-05-26 Alan Modra <amodra@bigpond.net.au>
301
302 * dep-in.sed: Don't modify .o to .lo here. Output one filename
303 per line with all lines having continuation backslash. Prefix
304 first line with "A", following lines with "B".
305 * Makefile.am (DEP): Don't use dep.sed here.
306 (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use
307 dep.sed here on dependencies, sort and uniq.
308 * Makefile.in: Regenerate.
309
3102009-05-25 Tristan Gingold <gingold@adacore.com>
311
312 * makefile.vms (OPT): New variable.
313 (CFLAGS): Update compilation flags.
314
3152009-05-22 DJ Delorie <dj@redhat.com>
316
317 * mep-asm.c: Regenerate.
318 * mep-desc.c: Regenerate.
319 * mep-desc.h: Regenerate.
320 * mep-dis.c: Regenerate.
321 * mep-ibld.c: Regenerate.
322 * mep-opc.c: Regenerate.
323 * mep-opc.h: Regenerate.
324
3252009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com>
326
327 * i386-opc.h (Cpusse5): Delete.
328 (i386_cpu_flags): Delete.
329 * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
330 * i386-opc.tbl: Remove SSE5 instructions.
331 * i386-tbl.h: Regenerate.
332 * i386-init.h: Regenerate.
333 * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
334 (print_drex_arg): Delete.
335 (OP_DREX4): Delete.
336 (OP_DREX3): Delete.
337 (OP_DREX_ICMP): Delete.
338 (OP_DREX_FCMP): Delete.
339 (DREX_*): Delete.
340 (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
341
3422009-05-22 Alan Modra <amodra@bigpond.net.au>
343
344 * Makefile.am: Run "make dep-am".
345 * Makefile.in: Regenerate.
346 * po/POTFILES.in: Regenerate.
347
3482009-05-19 DJ Delorie <dj@redhat.com>
349
350 * mep-asm.c: Regenerate.
351 * mep-opc.c: Regenerate.
352
3532009-04-30 DJ Delorie <dj@redhat.com>
354
355 * mep-asm.c: Regenerate.
356 * mep-desc.c: Regenerate.
357 * mep-desc.h: Regenerate.
358 * mep-dis.c: Regenerate.
359 * mep-ibld.c: Regenerate.
360 * mep-opc.c: Regenerate.
361 * mep-opc.h: Regenerate.
362
3632009-04-17 DJ Delorie <dj@redhat.com
364
365 * mep-desc.c: Regenerate.
366 * mep-ibld.c: Regenerate.
367 * mep-opc.c: Regenerate.
368 * mep-opc.h: Regenerate.
369
3702009-04-15 Anthony Green <green@moxielogic.com>
371
372 * moxie-opc.c, moxie-dis.c: Created.
373 * Makefile.am: Build the moxie source files.
374 * configure.in: Add moxie support.
375 * Makefile.in, configure: Rebuilt.
376 * disassemble.c (disassembler): Add moxie support.
377 (ARCH_moxie): Define.
378
3792009-04-15 Jan Beulich <jbeulich@novell.com>
380
381 * i386-opc.tbl (protb, protw, protd, protq): Set opcode
382 extension to None.
383 (pshab, pshaw, pshad, pshaq): Likewise.
384 * i386-tbl.h: Re-generate.
385
3862009-04-08 DJ Delorie <dj@redhat.com
387
388 * mep-asm.c: Regenerate.
389 * mep-desc.c: Regenerate.
390 * mep-desc.h: Regenerate.
391 * mep-dis.c: Regenerate.
392 * mep-ibld.c: Regenerate.
393 * mep-opc.c: Regenerate.
394 * mep-opc.h: Regenerate.
395
3962009-04-07 Peter Bergner <bergner@vnet.ibm.com>
397
398 * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
399 "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
400 Reorder entries so the extended mnemonics are listed before tlbilx.
401
4022009-04-02 Peter Bergner <bergner@vnet.ibm.com>
403
404 * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
405 due to -many/-Many.
406 (print_insn_powerpc): Make sure we only deprecate instructions using
407 the original dialect and not a modified dialect due to -Many handling.
408 Move the handling of the condition register and default operands to
409 the end of the if/else if/else chain.
410 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
411 instructions from newer processors are listed before older ones.
412 <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
413 that have instructions with conflicting opcodes.
414
4152009-04-01 Peter Bergner <bergner@vnet.ibm.com>
416
417 * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
418 E500MC entries.
419
4202009-04-01 Christophe Lyon <christophe.lyon@st.com>
421
422 * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
423
4242009-03-30 Joseph Myers <joseph@codesourcery.com>
425
426 * arm-dis.c (print_insn): Also check section matches in backwards
427 search for mapping symbol.
428
4292009-03-26 H.J. Lu <hongjiu.lu@intel.com>
430
431 * i386-dis.c (get_valid_dis386): Abort on unhandled table.
432
4332009-03-18 Alan Modra <amodra@bigpond.net.au>
434
435 * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
436 * Makefile.am: Run "make dep-am".
437 * Makefile.in: Regenerate.
438 * openrisc-opc.c: Regenerate.
439
4402009-03-10 Nick Clifton <nickc@redhat.com>
441
442 * po/id.po: Updated Indonesian translation.
443
4442009-03-10 Alan Modra <amodra@bigpond.net.au>
445
446 * ppc-dis.c: Include "opintl.h".
447 (struct ppc_mopt, ppc_opts): New.
448 (ppc_parse_cpu): New function.
449 (powerpc_init_dialect): Use it.
450 (print_ppc_disassembler_options): Dump options from ppc_opts.
451 Internationalize message.
452
4532009-03-06 Nick Clifton <nickc@redhat.com>
454
455 * po/es.po: Updated Spanish translation.
456
4572009-03-04 Alan Modra <amodra@bigpond.net.au>
458
459 PR 6768
460 * configure.in: Test for ld --as-needed support. Link shared
461 libopcodes against libm.
462 * configure: Regenerate.
463
4642009-03-03 Peter Bergner <bergner@vnet.ibm.com>
465
466 * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
467 instructions from newer processors are listed before older ones.
468
4692009-03-03 Alan Modra <amodra@bigpond.net.au>
470
471 * Makefile.am: Run "make dep-am".
472 (HFILES): Move lm32-desc.h and lm32-opc.h from..
473 (CFILES): ..here.
474 * Makefile.in: Regenerate.
475
4762009-03-02 Qinwei <qinwei@sunnorth.com.cn>
477
478 * score7-dis.c: New file.
479 * Makefile.am: Add dependencies for score7-dis.c.
480 * Makefile.in: Regenerate.
481 * configure.in: Add score7-dis to score files.
482 * configure: Regenerate.
483 * score-dis.c: Add support for score7 architecture.
484 * score-opc.h: Likewise.
485
4862009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
487
488 * configure: Regenerate.
489
4902009-02-27 H.J. Lu <hongjiu.lu@intel.com>
491
492 * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
493
4942009-02-26 Peter Bergner <bergner@vnet.ibm.com>
495
496 * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
497 the power7 and the isel instructions.
498 * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
499 (insert_dm, extract_dm): Likewise.
500 (XB6): Update comment to include XX2 form.
501 (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
502 XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
503 (RemoveXX3DM): Delete.
504 (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
505 "mftgpr">: Deprecate for POWER7.
506 <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
507 "frsqrte.">: Deprecate the three operand form and enable the two
508 operand form for POWER7 and later.
509 <"wait">: Extend to accept optional parameter. Enable for POWER7.
510 <"waitsrv", "waitimpl">: Add extended opcodes.
511 <"ldbrx", "stdbrx">: Enable for POWER7.
512 <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
513 <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
514 "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
515 "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
516 "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
517 "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
518 "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
519 "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
520 <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
521 "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
522 "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
523 "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
524 "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
525 "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
526 "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
527 "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
528 "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
529 "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
530 "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
531 "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
532 "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
533 "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
534 "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
535 "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
536 "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
537 "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
538 "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
539 "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
540 "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
541 "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
542 "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
543 "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
544 "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
545 "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
546 "xxspltw", "xxswapd">: Add VSX opcodes.
547
5482009-02-23 H.J. Lu <hongjiu.lu@intel.com>
549
550 * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
551 (operand_types): Remove Vex_Imm4.
552
553 * i386-opc.h (Vex_Imm4): Removed.
554 (OTMax): Updated.
555 (i386_operand_type): Remove vex_imm4.
556
557 * i386-opc.tbl: Remove Vex_Imm4 comments.
558 * i386-init.h: Regenerated.
559 * i386-tbl.h: Likewise.
560
5612009-02-23 Richard Earnshaw <rearnsha@arm.com>
562
563 * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
564 vq{r}shr{u}n.s64 insnstructions.
565
5662009-02-19 Peter Bergner <bergner@vnet.ibm.com>
567
568 * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
569 operand to be a float point register (FRT/FRS).
570
5712009-02-18 Adam Nemet <anemet@caviumnetworks.com>
572
573 * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
574 dmfc2 and dmtc2 before the architecture-level variants.
575
5762009-02-18 Pierre Muller <muller@ics.u-strasbg.fr>
577
578 * fr30-opc.c: Regenerate.
579 * frv-opc.c: Regenerate.
580 * ip2k-opc.c: Regenerate.
581 * iq2000-opc.c: Regenerate.
582 * lm32-opc.c: Regenerate.
583 * m32c-opc.c: Regenerate.
584 * m32r-opc.c: Regenerate.
585 * mep-opc.c: Regenerate.
586 * mt-opc.c: Regenerate.
587 * xc16x-opc.c: Regenerate.
588 * xstormy16-opc.c: Regenerate.
589 * tic54x-dis.c (print_instruction): Avoid compiler warning on
590 sprintf call.
591
5922009-02-12 Nathan Sidwell <nathan@codesourcery.com>
593
594 * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
595
5962009-02-05 Peter Bergner <bergner@vnet.ibm.com>
597
598 * ppc-opc.c: Update copyright year.
599 (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
600 ordering for POWER4 and later and use the correct Server ordering.
601
6022009-02-04 H.J. Lu <hongjiu.lu@intel.com>
603
604 AVX Programming Reference (January, 2009)
605 * i386-dis.c (PREFIX_VEX_3A44): New.
606 (VEX_LEN_3A44_P_2): Likewise.
607 (PREFIX_VEX_3A48): Updated.
608 (VEX_LEN_3A4C_P_2): Likewise.
609 (prefix_table): Add PREFIX_VEX_3A44.
610 (vex_table): Likewise.
611 (vex_len_table): Add VEX_LEN_3A44_P_2.
612
613 * i386-opc.tbl: Add PCLMUL + AVX instructions.
614 * i386-tbl.h: Regenerated.
615
6162009-02-03 Sandip Matte <sandip@rmicorp.com>
617
618 * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
619 (mips_arch_choices): Add XLR entry.
620 * mips-opc.c (XLR): Define.
621 (mips_builtin_opcodes): Add XLR instructions.
622
6232009-02-03 Carlos O'Donell <carlos@codesourcery.com>
624
625 * Makefile.am: Add install-pdf target.
626 * po/Make-in: Add install-pdf target.
627 * Makefile.in: Regenerate.
628
6292009-02-02 DJ Delorie <dj@redhat.com>
630
631 * mep-asm.c: Regenerate.
632 * mep-desc.c: Regenerate.
633 * mep-desc.h: Regenerate.
634 * mep-dis.c: Regenerate.
635 * mep-ibld.c: Regenerate.
636 * mep-opc.c: Regenerate.
637 * mep-opc.h: Regenerate.
638
6392009-01-29 Mark Mitchell <mark@codesourcery.com>
640
641 * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
642 qsub, and qdsub.
643
6442009-01-28 Chao-ying Fu <fu@mips.com>
645
646 * mips-opc.c (suxc1): Add the flag of FP_D.
647
6482009-01-20 Alan Modra <amodra@bigpond.net.au>
649
650 * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
651 * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
652 * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
653 * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
654 * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
655 * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
656 * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
657 * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
658
6592009-01-16 Alan Modra <amodra@bigpond.net.au>
660
661 * configure.in (commonbfdlib): Delete.
662 (SHARED_LIBADD): Add pic libiberty if such is available.
663 * configure: Regenerate.
664 * po/POTFILES.in: Regenerate.
665
6662009-01-14 Peter Bergner <bergner@vnet.ibm.com>
667
668 * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
669 * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
670 operand form and enable the four operand form for POWER6 and later.
671 <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
672 three operand form for POWER6 and later.
673
6742009-01-14 Mike Frysinger <vapier@gentoo.org>
675
676 * bfin-dis.c (OUTS): Use "%s" as format string.
677
6782009-01-13 H.J. Lu <hongjiu.lu@intel.com>
679
680 * i386-gen.c (cpu_flag_init): Remove a white space.
681 (operand_type_init): Likewise.
682
6832009-01-12 H.J. Lu <hongjiu.lu@intel.com>
684
685 * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
686 * i386-tbl.h: Regenerated.
687
6882009-01-12 H.J. Lu <hongjiu.lu@intel.com>
689
690 * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
691 subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS,
692 subS, xorS and cmpS.
693
6942009-01-10 H.J. Lu <hongjiu.lu@intel.com>
695
696 * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
697 CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add
698 CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
699 (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush
700 and CpuSYSCALL.
701 (lineno): Removed.
702 (set_bitfield): Take an argument, lineno. Don't report lineno
703 on error if it is -1.
704 (process_i386_cpu_flag): Take an argument, lineno.
705 (process_i386_opcode_modifier): Likewise.
706 (process_i386_operand_type): Likewise.
707 (output_i386_opcode): Likewise.
708 (opcode_hash_entry): Add lineno.
709 (process_i386_opcodes): Updated.
710 (process_i386_registers): Likewise.
711 (process_i386_initializers): Likewise.
712
713 * i386-opc.h (CpuP4): Removed.
714 (CpuK6): Likewise.
715 (CpuK8): Likewise.
716 (CpuClflush): New.
717 (CpuSYSCALL): Likewise.
718 (CpuMMX): Updated.
719 (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add
720 cpuclflush and cpusyscall.
721
722 * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
723 syscall and sysret.
724 * i386-init.h: Regenerated.
725 * i386-tbl.h: Likewise.
726
7272009-01-09 H.J. Lu <hongjiu.lu@intel.com>
728
729 * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
730 and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS.
731 (cpu_flags): Add CpuRdtscp.
732 (set_bitfield): Remove CpuSledgehammer check.
733
734 * i386-opc.h (CpuRdtscp): New.
735 (CpuLM): Updated.
736 (i386_cpu_flags): Add cpurdtscp.
737
738 * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
739 * i386-init.h: Regenerated.
740 * i386-tbl.h: Likewise.
741
7422009-01-09 Peter Bergner <bergner@vnet.ibm.com>
743
744 * ppc-opc.c (PPCNONE): Define.
745 (NOPOWER4): Delete.
746 (powerpc_opcodes): Initialize the new "deprecated" field.
747
7482009-01-06 H.J. Lu <hongjiu.lu@intel.com>
749
750 AVX Programming Reference (December, 2008)
751 * i386-dis.c (VEX_LEN_2B_M_0): Removed.
752 (VEX_LEN_E7_P_2_M_0): Likewise.
753 (VEX_LEN_2C_P_1): Updated.
754 (VEX_LEN_E8_P_2): Likewise.
755 (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
756 (mod_table): Likewise.
757
758 * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
759 * i386-tbl.h: Regenerated.
760
7612009-01-05 H.J. Lu <hongjiu.lu@intel.com>
762
763 * i386-gen.c (process_copyright): Update for 2009.
764
765 * i386-init.h: Regenerated.
766 * i386-tbl.h: Likewise.
767
7682009-01-05 H.J. Lu <hongjiu.lu@intel.com>
769
770 AVX Programming Reference (December, 2008)
771 * i386-dis.c (OP_VEX_FMA): Removed.
772 (OP_EX_VexW): Likewise.
773 (OP_EX_VexImmW): Likewise.
774 (OP_XMM_VexW): Likewise.
775 (VEXI4_Fixup): Likewise.
776 (VPERMIL2_Fixup): Likewise.
777 (VexI4): Likewise.
778 (VexFMA): Likewise.
779 (Vex128FMA): Likewise.
780 (EXVexW): Likewise.
781 (EXdVexW): Likewise.
782 (EXqVexW): Likewise.
783 (EXVexImmW): Likewise.
784 (XMVexW): Likewise.
785 (VPERMIL2): Likewise.
786 (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
787 (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
788 (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
789 (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
790 (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
791 (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
792 (get_vex_imm8): Likewise.
793 (OP_EX_VexReg): Likewise.
794 vpermil2_op): Likewise.
795 (EXVexWdq): New.
796 (vex_w_dq_mode): Likewise.
797 (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
798 (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
799 (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
800 (es_reg): Updated.
801 (PREFIX_VEX_38DB): Likewise.
802 (PREFIX_VEX_3A4A): Likewise.
803 (PREFIX_VEX_3A60): Likewise.
804 (PREFIX_VEX_3ADF): Likewise.
805 (VEX_LEN_3ADF_P_2): Likewise.
806 (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
807 PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
808 PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
809 PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add
810 PREFIX_VEX_3896...PREFIX_VEX_389F,
811 PREFIX_VEX_38A6...PREFIX_VEX_38AF and
812 PREFIX_VEX_38B6...PREFIX_VEX_38BF.
813 (vex_table): Likewise.
814 (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
815 and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
816 (putop): Support "%XW".
817 (intel_operand_size): Handle vex_w_dq_mode.
818
819 * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
820
821 * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
822 instructions. Add new FMA instructions.
823 * i386-tbl.h: Regenerated.
824
8252009-01-02 Matthias Klose <doko@ubuntu.com>
826
827 * or32-opc.c (or32_print_register, or32_print_immediate,
828 disassemble_insn): Don't rely on undefined sprintf behaviour.
829
830For older changes see ChangeLog-2008
831\f
832Local Variables:
833mode: change-log
834left-margin: 8
835fill-column: 74
836version-control: never
837End:
This page took 0.028365 seconds and 4 git commands to generate.