| 1 | /* Print mips instructions for GDB, the GNU debugger, or for objdump. |
| 2 | Copyright (C) 1989-2020 Free Software Foundation, Inc. |
| 3 | Contributed by Nobuyuki Hikichi(hikichi@sra.co.jp). |
| 4 | |
| 5 | This file is part of the GNU opcodes library. |
| 6 | |
| 7 | This library is free software; you can redistribute it and/or modify |
| 8 | it under the terms of the GNU General Public License as published by |
| 9 | the Free Software Foundation; either version 3, or (at your option) |
| 10 | any later version. |
| 11 | |
| 12 | It is distributed in the hope that it will be useful, but WITHOUT |
| 13 | ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| 14 | or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| 15 | License for more details. |
| 16 | |
| 17 | You should have received a copy of the GNU General Public License |
| 18 | along with this program; if not, write to the Free Software |
| 19 | Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, |
| 20 | MA 02110-1301, USA. */ |
| 21 | |
| 22 | #include "sysdep.h" |
| 23 | #include "disassemble.h" |
| 24 | #include "libiberty.h" |
| 25 | #include "opcode/mips.h" |
| 26 | #include "opintl.h" |
| 27 | #include "elf-bfd.h" |
| 28 | #include "elf/mips.h" |
| 29 | #include "elfxx-mips.h" |
| 30 | |
| 31 | /* FIXME: These are needed to figure out if the code is mips16 or |
| 32 | not. The low bit of the address is often a good indicator. No |
| 33 | symbol table is available when this code runs out in an embedded |
| 34 | system as when it is used for disassembler support in a monitor. */ |
| 35 | |
| 36 | #if !defined(EMBEDDED_ENV) |
| 37 | #define SYMTAB_AVAILABLE 1 |
| 38 | #endif |
| 39 | |
| 40 | /* Mips instructions are at maximum this many bytes long. */ |
| 41 | #define INSNLEN 4 |
| 42 | |
| 43 | \f |
| 44 | /* FIXME: These should be shared with gdb somehow. */ |
| 45 | |
| 46 | struct mips_cp0sel_name |
| 47 | { |
| 48 | unsigned int cp0reg; |
| 49 | unsigned int sel; |
| 50 | const char * const name; |
| 51 | }; |
| 52 | |
| 53 | static const char * const mips_gpr_names_numeric[32] = |
| 54 | { |
| 55 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 56 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 57 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 58 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 59 | }; |
| 60 | |
| 61 | static const char * const mips_gpr_names_oldabi[32] = |
| 62 | { |
| 63 | "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| 64 | "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", |
| 65 | "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| 66 | "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" |
| 67 | }; |
| 68 | |
| 69 | static const char * const mips_gpr_names_newabi[32] = |
| 70 | { |
| 71 | "zero", "at", "v0", "v1", "a0", "a1", "a2", "a3", |
| 72 | "a4", "a5", "a6", "a7", "t0", "t1", "t2", "t3", |
| 73 | "s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7", |
| 74 | "t8", "t9", "k0", "k1", "gp", "sp", "s8", "ra" |
| 75 | }; |
| 76 | |
| 77 | static const char * const mips_fpr_names_numeric[32] = |
| 78 | { |
| 79 | "$f0", "$f1", "$f2", "$f3", "$f4", "$f5", "$f6", "$f7", |
| 80 | "$f8", "$f9", "$f10", "$f11", "$f12", "$f13", "$f14", "$f15", |
| 81 | "$f16", "$f17", "$f18", "$f19", "$f20", "$f21", "$f22", "$f23", |
| 82 | "$f24", "$f25", "$f26", "$f27", "$f28", "$f29", "$f30", "$f31" |
| 83 | }; |
| 84 | |
| 85 | static const char * const mips_fpr_names_32[32] = |
| 86 | { |
| 87 | "fv0", "fv0f", "fv1", "fv1f", "ft0", "ft0f", "ft1", "ft1f", |
| 88 | "ft2", "ft2f", "ft3", "ft3f", "fa0", "fa0f", "fa1", "fa1f", |
| 89 | "ft4", "ft4f", "ft5", "ft5f", "fs0", "fs0f", "fs1", "fs1f", |
| 90 | "fs2", "fs2f", "fs3", "fs3f", "fs4", "fs4f", "fs5", "fs5f" |
| 91 | }; |
| 92 | |
| 93 | static const char * const mips_fpr_names_n32[32] = |
| 94 | { |
| 95 | "fv0", "ft14", "fv1", "ft15", "ft0", "ft1", "ft2", "ft3", |
| 96 | "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", |
| 97 | "fa4", "fa5", "fa6", "fa7", "fs0", "ft8", "fs1", "ft9", |
| 98 | "fs2", "ft10", "fs3", "ft11", "fs4", "ft12", "fs5", "ft13" |
| 99 | }; |
| 100 | |
| 101 | static const char * const mips_fpr_names_64[32] = |
| 102 | { |
| 103 | "fv0", "ft12", "fv1", "ft13", "ft0", "ft1", "ft2", "ft3", |
| 104 | "ft4", "ft5", "ft6", "ft7", "fa0", "fa1", "fa2", "fa3", |
| 105 | "fa4", "fa5", "fa6", "fa7", "ft8", "ft9", "ft10", "ft11", |
| 106 | "fs0", "fs1", "fs2", "fs3", "fs4", "fs5", "fs6", "fs7" |
| 107 | }; |
| 108 | |
| 109 | static const char * const mips_cp0_names_numeric[32] = |
| 110 | { |
| 111 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 112 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 113 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 114 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 115 | }; |
| 116 | |
| 117 | static const char * const mips_cp1_names_numeric[32] = |
| 118 | { |
| 119 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 120 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 121 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 122 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 123 | }; |
| 124 | |
| 125 | static const char * const mips_cp0_names_r3000[32] = |
| 126 | { |
| 127 | "c0_index", "c0_random", "c0_entrylo", "$3", |
| 128 | "c0_context", "$5", "$6", "$7", |
| 129 | "c0_badvaddr", "$9", "c0_entryhi", "$11", |
| 130 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 131 | "$16", "$17", "$18", "$19", |
| 132 | "$20", "$21", "$22", "$23", |
| 133 | "$24", "$25", "$26", "$27", |
| 134 | "$28", "$29", "$30", "$31", |
| 135 | }; |
| 136 | |
| 137 | static const char * const mips_cp0_names_r4000[32] = |
| 138 | { |
| 139 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 140 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 141 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 142 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 143 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 144 | "c0_xcontext", "$21", "$22", "$23", |
| 145 | "$24", "$25", "c0_ecc", "c0_cacheerr", |
| 146 | "c0_taglo", "c0_taghi", "c0_errorepc", "$31", |
| 147 | }; |
| 148 | |
| 149 | static const char * const mips_cp0_names_r5900[32] = |
| 150 | { |
| 151 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 152 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 153 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 154 | "c0_sr", "c0_cause", "c0_epc", "c0_prid", |
| 155 | "c0_config", "$17", "$18", "$19", |
| 156 | "$20", "$21", "$22", "c0_badpaddr", |
| 157 | "c0_depc", "c0_perfcnt", "$26", "$27", |
| 158 | "c0_taglo", "c0_taghi", "c0_errorepc", "$31" |
| 159 | }; |
| 160 | |
| 161 | static const char * const mips_cp0_names_mips3264[32] = |
| 162 | { |
| 163 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 164 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 165 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 166 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 167 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 168 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 169 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", |
| 170 | "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", |
| 171 | }; |
| 172 | |
| 173 | static const char * const mips_cp1_names_mips3264[32] = |
| 174 | { |
| 175 | "c1_fir", "c1_ufr", "$2", "$3", |
| 176 | "c1_unfr", "$5", "$6", "$7", |
| 177 | "$8", "$9", "$10", "$11", |
| 178 | "$12", "$13", "$14", "$15", |
| 179 | "$16", "$17", "$18", "$19", |
| 180 | "$20", "$21", "$22", "$23", |
| 181 | "$24", "c1_fccr", "c1_fexr", "$27", |
| 182 | "c1_fenr", "$29", "$30", "c1_fcsr" |
| 183 | }; |
| 184 | |
| 185 | static const struct mips_cp0sel_name mips_cp0sel_names_mips3264[] = |
| 186 | { |
| 187 | { 16, 1, "c0_config1" }, |
| 188 | { 16, 2, "c0_config2" }, |
| 189 | { 16, 3, "c0_config3" }, |
| 190 | { 18, 1, "c0_watchlo,1" }, |
| 191 | { 18, 2, "c0_watchlo,2" }, |
| 192 | { 18, 3, "c0_watchlo,3" }, |
| 193 | { 18, 4, "c0_watchlo,4" }, |
| 194 | { 18, 5, "c0_watchlo,5" }, |
| 195 | { 18, 6, "c0_watchlo,6" }, |
| 196 | { 18, 7, "c0_watchlo,7" }, |
| 197 | { 19, 1, "c0_watchhi,1" }, |
| 198 | { 19, 2, "c0_watchhi,2" }, |
| 199 | { 19, 3, "c0_watchhi,3" }, |
| 200 | { 19, 4, "c0_watchhi,4" }, |
| 201 | { 19, 5, "c0_watchhi,5" }, |
| 202 | { 19, 6, "c0_watchhi,6" }, |
| 203 | { 19, 7, "c0_watchhi,7" }, |
| 204 | { 25, 1, "c0_perfcnt,1" }, |
| 205 | { 25, 2, "c0_perfcnt,2" }, |
| 206 | { 25, 3, "c0_perfcnt,3" }, |
| 207 | { 25, 4, "c0_perfcnt,4" }, |
| 208 | { 25, 5, "c0_perfcnt,5" }, |
| 209 | { 25, 6, "c0_perfcnt,6" }, |
| 210 | { 25, 7, "c0_perfcnt,7" }, |
| 211 | { 27, 1, "c0_cacheerr,1" }, |
| 212 | { 27, 2, "c0_cacheerr,2" }, |
| 213 | { 27, 3, "c0_cacheerr,3" }, |
| 214 | { 28, 1, "c0_datalo" }, |
| 215 | { 29, 1, "c0_datahi" } |
| 216 | }; |
| 217 | |
| 218 | static const char * const mips_cp0_names_mips3264r2[32] = |
| 219 | { |
| 220 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 221 | "c0_context", "c0_pagemask", "c0_wired", "c0_hwrena", |
| 222 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 223 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 224 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 225 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 226 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr", |
| 227 | "c0_taglo", "c0_taghi", "c0_errorepc", "c0_desave", |
| 228 | }; |
| 229 | |
| 230 | static const struct mips_cp0sel_name mips_cp0sel_names_mips3264r2[] = |
| 231 | { |
| 232 | { 4, 1, "c0_contextconfig" }, |
| 233 | { 0, 1, "c0_mvpcontrol" }, |
| 234 | { 0, 2, "c0_mvpconf0" }, |
| 235 | { 0, 3, "c0_mvpconf1" }, |
| 236 | { 1, 1, "c0_vpecontrol" }, |
| 237 | { 1, 2, "c0_vpeconf0" }, |
| 238 | { 1, 3, "c0_vpeconf1" }, |
| 239 | { 1, 4, "c0_yqmask" }, |
| 240 | { 1, 5, "c0_vpeschedule" }, |
| 241 | { 1, 6, "c0_vpeschefback" }, |
| 242 | { 2, 1, "c0_tcstatus" }, |
| 243 | { 2, 2, "c0_tcbind" }, |
| 244 | { 2, 3, "c0_tcrestart" }, |
| 245 | { 2, 4, "c0_tchalt" }, |
| 246 | { 2, 5, "c0_tccontext" }, |
| 247 | { 2, 6, "c0_tcschedule" }, |
| 248 | { 2, 7, "c0_tcschefback" }, |
| 249 | { 5, 1, "c0_pagegrain" }, |
| 250 | { 6, 1, "c0_srsconf0" }, |
| 251 | { 6, 2, "c0_srsconf1" }, |
| 252 | { 6, 3, "c0_srsconf2" }, |
| 253 | { 6, 4, "c0_srsconf3" }, |
| 254 | { 6, 5, "c0_srsconf4" }, |
| 255 | { 12, 1, "c0_intctl" }, |
| 256 | { 12, 2, "c0_srsctl" }, |
| 257 | { 12, 3, "c0_srsmap" }, |
| 258 | { 15, 1, "c0_ebase" }, |
| 259 | { 16, 1, "c0_config1" }, |
| 260 | { 16, 2, "c0_config2" }, |
| 261 | { 16, 3, "c0_config3" }, |
| 262 | { 18, 1, "c0_watchlo,1" }, |
| 263 | { 18, 2, "c0_watchlo,2" }, |
| 264 | { 18, 3, "c0_watchlo,3" }, |
| 265 | { 18, 4, "c0_watchlo,4" }, |
| 266 | { 18, 5, "c0_watchlo,5" }, |
| 267 | { 18, 6, "c0_watchlo,6" }, |
| 268 | { 18, 7, "c0_watchlo,7" }, |
| 269 | { 19, 1, "c0_watchhi,1" }, |
| 270 | { 19, 2, "c0_watchhi,2" }, |
| 271 | { 19, 3, "c0_watchhi,3" }, |
| 272 | { 19, 4, "c0_watchhi,4" }, |
| 273 | { 19, 5, "c0_watchhi,5" }, |
| 274 | { 19, 6, "c0_watchhi,6" }, |
| 275 | { 19, 7, "c0_watchhi,7" }, |
| 276 | { 23, 1, "c0_tracecontrol" }, |
| 277 | { 23, 2, "c0_tracecontrol2" }, |
| 278 | { 23, 3, "c0_usertracedata" }, |
| 279 | { 23, 4, "c0_tracebpc" }, |
| 280 | { 25, 1, "c0_perfcnt,1" }, |
| 281 | { 25, 2, "c0_perfcnt,2" }, |
| 282 | { 25, 3, "c0_perfcnt,3" }, |
| 283 | { 25, 4, "c0_perfcnt,4" }, |
| 284 | { 25, 5, "c0_perfcnt,5" }, |
| 285 | { 25, 6, "c0_perfcnt,6" }, |
| 286 | { 25, 7, "c0_perfcnt,7" }, |
| 287 | { 27, 1, "c0_cacheerr,1" }, |
| 288 | { 27, 2, "c0_cacheerr,2" }, |
| 289 | { 27, 3, "c0_cacheerr,3" }, |
| 290 | { 28, 1, "c0_datalo" }, |
| 291 | { 28, 2, "c0_taglo1" }, |
| 292 | { 28, 3, "c0_datalo1" }, |
| 293 | { 28, 4, "c0_taglo2" }, |
| 294 | { 28, 5, "c0_datalo2" }, |
| 295 | { 28, 6, "c0_taglo3" }, |
| 296 | { 28, 7, "c0_datalo3" }, |
| 297 | { 29, 1, "c0_datahi" }, |
| 298 | { 29, 2, "c0_taghi1" }, |
| 299 | { 29, 3, "c0_datahi1" }, |
| 300 | { 29, 4, "c0_taghi2" }, |
| 301 | { 29, 5, "c0_datahi2" }, |
| 302 | { 29, 6, "c0_taghi3" }, |
| 303 | { 29, 7, "c0_datahi3" }, |
| 304 | }; |
| 305 | |
| 306 | /* SB-1: MIPS64 (mips_cp0_names_mips3264) with minor mods. */ |
| 307 | static const char * const mips_cp0_names_sb1[32] = |
| 308 | { |
| 309 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 310 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 311 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 312 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 313 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 314 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 315 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", |
| 316 | "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", |
| 317 | }; |
| 318 | |
| 319 | static const struct mips_cp0sel_name mips_cp0sel_names_sb1[] = |
| 320 | { |
| 321 | { 16, 1, "c0_config1" }, |
| 322 | { 18, 1, "c0_watchlo,1" }, |
| 323 | { 19, 1, "c0_watchhi,1" }, |
| 324 | { 22, 0, "c0_perftrace" }, |
| 325 | { 23, 3, "c0_edebug" }, |
| 326 | { 25, 1, "c0_perfcnt,1" }, |
| 327 | { 25, 2, "c0_perfcnt,2" }, |
| 328 | { 25, 3, "c0_perfcnt,3" }, |
| 329 | { 25, 4, "c0_perfcnt,4" }, |
| 330 | { 25, 5, "c0_perfcnt,5" }, |
| 331 | { 25, 6, "c0_perfcnt,6" }, |
| 332 | { 25, 7, "c0_perfcnt,7" }, |
| 333 | { 26, 1, "c0_buserr_pa" }, |
| 334 | { 27, 1, "c0_cacheerr_d" }, |
| 335 | { 27, 3, "c0_cacheerr_d_pa" }, |
| 336 | { 28, 1, "c0_datalo_i" }, |
| 337 | { 28, 2, "c0_taglo_d" }, |
| 338 | { 28, 3, "c0_datalo_d" }, |
| 339 | { 29, 1, "c0_datahi_i" }, |
| 340 | { 29, 2, "c0_taghi_d" }, |
| 341 | { 29, 3, "c0_datahi_d" }, |
| 342 | }; |
| 343 | |
| 344 | /* Xlr cop0 register names. */ |
| 345 | static const char * const mips_cp0_names_xlr[32] = { |
| 346 | "c0_index", "c0_random", "c0_entrylo0", "c0_entrylo1", |
| 347 | "c0_context", "c0_pagemask", "c0_wired", "$7", |
| 348 | "c0_badvaddr", "c0_count", "c0_entryhi", "c0_compare", |
| 349 | "c0_status", "c0_cause", "c0_epc", "c0_prid", |
| 350 | "c0_config", "c0_lladdr", "c0_watchlo", "c0_watchhi", |
| 351 | "c0_xcontext", "$21", "$22", "c0_debug", |
| 352 | "c0_depc", "c0_perfcnt", "c0_errctl", "c0_cacheerr_i", |
| 353 | "c0_taglo_i", "c0_taghi_i", "c0_errorepc", "c0_desave", |
| 354 | }; |
| 355 | |
| 356 | /* XLR's CP0 Select Registers. */ |
| 357 | |
| 358 | static const struct mips_cp0sel_name mips_cp0sel_names_xlr[] = { |
| 359 | { 9, 6, "c0_extintreq" }, |
| 360 | { 9, 7, "c0_extintmask" }, |
| 361 | { 15, 1, "c0_ebase" }, |
| 362 | { 16, 1, "c0_config1" }, |
| 363 | { 16, 2, "c0_config2" }, |
| 364 | { 16, 3, "c0_config3" }, |
| 365 | { 16, 7, "c0_procid2" }, |
| 366 | { 18, 1, "c0_watchlo,1" }, |
| 367 | { 18, 2, "c0_watchlo,2" }, |
| 368 | { 18, 3, "c0_watchlo,3" }, |
| 369 | { 18, 4, "c0_watchlo,4" }, |
| 370 | { 18, 5, "c0_watchlo,5" }, |
| 371 | { 18, 6, "c0_watchlo,6" }, |
| 372 | { 18, 7, "c0_watchlo,7" }, |
| 373 | { 19, 1, "c0_watchhi,1" }, |
| 374 | { 19, 2, "c0_watchhi,2" }, |
| 375 | { 19, 3, "c0_watchhi,3" }, |
| 376 | { 19, 4, "c0_watchhi,4" }, |
| 377 | { 19, 5, "c0_watchhi,5" }, |
| 378 | { 19, 6, "c0_watchhi,6" }, |
| 379 | { 19, 7, "c0_watchhi,7" }, |
| 380 | { 25, 1, "c0_perfcnt,1" }, |
| 381 | { 25, 2, "c0_perfcnt,2" }, |
| 382 | { 25, 3, "c0_perfcnt,3" }, |
| 383 | { 25, 4, "c0_perfcnt,4" }, |
| 384 | { 25, 5, "c0_perfcnt,5" }, |
| 385 | { 25, 6, "c0_perfcnt,6" }, |
| 386 | { 25, 7, "c0_perfcnt,7" }, |
| 387 | { 27, 1, "c0_cacheerr,1" }, |
| 388 | { 27, 2, "c0_cacheerr,2" }, |
| 389 | { 27, 3, "c0_cacheerr,3" }, |
| 390 | { 28, 1, "c0_datalo" }, |
| 391 | { 29, 1, "c0_datahi" } |
| 392 | }; |
| 393 | |
| 394 | static const char * const mips_hwr_names_numeric[32] = |
| 395 | { |
| 396 | "$0", "$1", "$2", "$3", "$4", "$5", "$6", "$7", |
| 397 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 398 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 399 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 400 | }; |
| 401 | |
| 402 | static const char * const mips_hwr_names_mips3264r2[32] = |
| 403 | { |
| 404 | "hwr_cpunum", "hwr_synci_step", "hwr_cc", "hwr_ccres", |
| 405 | "$4", "$5", "$6", "$7", |
| 406 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 407 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 408 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 409 | }; |
| 410 | |
| 411 | static const char * const msa_control_names[32] = |
| 412 | { |
| 413 | "msa_ir", "msa_csr", "msa_access", "msa_save", |
| 414 | "msa_modify", "msa_request", "msa_map", "msa_unmap", |
| 415 | "$8", "$9", "$10", "$11", "$12", "$13", "$14", "$15", |
| 416 | "$16", "$17", "$18", "$19", "$20", "$21", "$22", "$23", |
| 417 | "$24", "$25", "$26", "$27", "$28", "$29", "$30", "$31" |
| 418 | }; |
| 419 | |
| 420 | struct mips_abi_choice |
| 421 | { |
| 422 | const char * name; |
| 423 | const char * const *gpr_names; |
| 424 | const char * const *fpr_names; |
| 425 | }; |
| 426 | |
| 427 | struct mips_abi_choice mips_abi_choices[] = |
| 428 | { |
| 429 | { "numeric", mips_gpr_names_numeric, mips_fpr_names_numeric }, |
| 430 | { "32", mips_gpr_names_oldabi, mips_fpr_names_32 }, |
| 431 | { "n32", mips_gpr_names_newabi, mips_fpr_names_n32 }, |
| 432 | { "64", mips_gpr_names_newabi, mips_fpr_names_64 }, |
| 433 | }; |
| 434 | |
| 435 | struct mips_arch_choice |
| 436 | { |
| 437 | const char *name; |
| 438 | int bfd_mach_valid; |
| 439 | unsigned long bfd_mach; |
| 440 | int processor; |
| 441 | int isa; |
| 442 | int ase; |
| 443 | const char * const *cp0_names; |
| 444 | const struct mips_cp0sel_name *cp0sel_names; |
| 445 | unsigned int cp0sel_names_len; |
| 446 | const char * const *cp1_names; |
| 447 | const char * const *hwr_names; |
| 448 | }; |
| 449 | |
| 450 | const struct mips_arch_choice mips_arch_choices[] = |
| 451 | { |
| 452 | { "numeric", 0, 0, 0, 0, 0, |
| 453 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 454 | mips_hwr_names_numeric }, |
| 455 | |
| 456 | { "r3000", 1, bfd_mach_mips3000, CPU_R3000, ISA_MIPS1, 0, |
| 457 | mips_cp0_names_r3000, NULL, 0, mips_cp1_names_numeric, |
| 458 | mips_hwr_names_numeric }, |
| 459 | { "r3900", 1, bfd_mach_mips3900, CPU_R3900, ISA_MIPS1, 0, |
| 460 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 461 | mips_hwr_names_numeric }, |
| 462 | { "r4000", 1, bfd_mach_mips4000, CPU_R4000, ISA_MIPS3, 0, |
| 463 | mips_cp0_names_r4000, NULL, 0, mips_cp1_names_numeric, |
| 464 | mips_hwr_names_numeric }, |
| 465 | { "r4010", 1, bfd_mach_mips4010, CPU_R4010, ISA_MIPS2, 0, |
| 466 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 467 | mips_hwr_names_numeric }, |
| 468 | { "vr4100", 1, bfd_mach_mips4100, CPU_VR4100, ISA_MIPS3, 0, |
| 469 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 470 | mips_hwr_names_numeric }, |
| 471 | { "vr4111", 1, bfd_mach_mips4111, CPU_R4111, ISA_MIPS3, 0, |
| 472 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 473 | mips_hwr_names_numeric }, |
| 474 | { "vr4120", 1, bfd_mach_mips4120, CPU_VR4120, ISA_MIPS3, 0, |
| 475 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 476 | mips_hwr_names_numeric }, |
| 477 | { "r4300", 1, bfd_mach_mips4300, CPU_R4300, ISA_MIPS3, 0, |
| 478 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 479 | mips_hwr_names_numeric }, |
| 480 | { "r4400", 1, bfd_mach_mips4400, CPU_R4400, ISA_MIPS3, 0, |
| 481 | mips_cp0_names_r4000, NULL, 0, mips_cp1_names_numeric, |
| 482 | mips_hwr_names_numeric }, |
| 483 | { "r4600", 1, bfd_mach_mips4600, CPU_R4600, ISA_MIPS3, 0, |
| 484 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 485 | mips_hwr_names_numeric }, |
| 486 | { "r4650", 1, bfd_mach_mips4650, CPU_R4650, ISA_MIPS3, 0, |
| 487 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 488 | mips_hwr_names_numeric }, |
| 489 | { "r5000", 1, bfd_mach_mips5000, CPU_R5000, ISA_MIPS4, 0, |
| 490 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 491 | mips_hwr_names_numeric }, |
| 492 | { "vr5400", 1, bfd_mach_mips5400, CPU_VR5400, ISA_MIPS4, 0, |
| 493 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 494 | mips_hwr_names_numeric }, |
| 495 | { "vr5500", 1, bfd_mach_mips5500, CPU_VR5500, ISA_MIPS4, 0, |
| 496 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 497 | mips_hwr_names_numeric }, |
| 498 | { "r5900", 1, bfd_mach_mips5900, CPU_R5900, ISA_MIPS3, 0, |
| 499 | mips_cp0_names_r5900, NULL, 0, mips_cp1_names_numeric, |
| 500 | mips_hwr_names_numeric }, |
| 501 | { "r6000", 1, bfd_mach_mips6000, CPU_R6000, ISA_MIPS2, 0, |
| 502 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 503 | mips_hwr_names_numeric }, |
| 504 | { "rm7000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, |
| 505 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 506 | mips_hwr_names_numeric }, |
| 507 | { "rm9000", 1, bfd_mach_mips7000, CPU_RM7000, ISA_MIPS4, 0, |
| 508 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 509 | mips_hwr_names_numeric }, |
| 510 | { "r8000", 1, bfd_mach_mips8000, CPU_R8000, ISA_MIPS4, 0, |
| 511 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 512 | mips_hwr_names_numeric }, |
| 513 | { "r10000", 1, bfd_mach_mips10000, CPU_R10000, ISA_MIPS4, 0, |
| 514 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 515 | mips_hwr_names_numeric }, |
| 516 | { "r12000", 1, bfd_mach_mips12000, CPU_R12000, ISA_MIPS4, 0, |
| 517 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 518 | mips_hwr_names_numeric }, |
| 519 | { "r14000", 1, bfd_mach_mips14000, CPU_R14000, ISA_MIPS4, 0, |
| 520 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 521 | mips_hwr_names_numeric }, |
| 522 | { "r16000", 1, bfd_mach_mips16000, CPU_R16000, ISA_MIPS4, 0, |
| 523 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 524 | mips_hwr_names_numeric }, |
| 525 | { "mips5", 1, bfd_mach_mips5, CPU_MIPS5, ISA_MIPS5, 0, |
| 526 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 527 | mips_hwr_names_numeric }, |
| 528 | |
| 529 | /* For stock MIPS32, disassemble all applicable MIPS-specified ASEs. |
| 530 | Note that MIPS-3D and MDMX are not applicable to MIPS32. (See |
| 531 | _MIPS32 Architecture For Programmers Volume I: Introduction to the |
| 532 | MIPS32 Architecture_ (MIPS Document Number MD00082, Revision 0.95), |
| 533 | page 1. */ |
| 534 | { "mips32", 1, bfd_mach_mipsisa32, CPU_MIPS32, |
| 535 | ISA_MIPS32, ASE_SMARTMIPS, |
| 536 | mips_cp0_names_mips3264, |
| 537 | mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), |
| 538 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 539 | |
| 540 | { "mips32r2", 1, bfd_mach_mipsisa32r2, CPU_MIPS32R2, |
| 541 | ISA_MIPS32R2, |
| 542 | (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D |
| 543 | | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), |
| 544 | mips_cp0_names_mips3264r2, |
| 545 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 546 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 547 | |
| 548 | { "mips32r3", 1, bfd_mach_mipsisa32r3, CPU_MIPS32R3, |
| 549 | ISA_MIPS32R3, |
| 550 | (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D |
| 551 | | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), |
| 552 | mips_cp0_names_mips3264r2, |
| 553 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 554 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 555 | |
| 556 | { "mips32r5", 1, bfd_mach_mipsisa32r5, CPU_MIPS32R5, |
| 557 | ISA_MIPS32R5, |
| 558 | (ASE_SMARTMIPS | ASE_DSP | ASE_DSPR2 | ASE_EVA | ASE_MIPS3D |
| 559 | | ASE_MT | ASE_MCU | ASE_VIRT | ASE_MSA | ASE_XPA), |
| 560 | mips_cp0_names_mips3264r2, |
| 561 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 562 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 563 | |
| 564 | { "mips32r6", 1, bfd_mach_mipsisa32r6, CPU_MIPS32R6, |
| 565 | ISA_MIPS32R6, |
| 566 | (ASE_EVA | ASE_MSA | ASE_VIRT | ASE_XPA | ASE_MCU | ASE_MT | ASE_DSP |
| 567 | | ASE_DSPR2 | ASE_DSPR3 | ASE_CRC | ASE_GINV), |
| 568 | mips_cp0_names_mips3264r2, |
| 569 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 570 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 571 | |
| 572 | /* For stock MIPS64, disassemble all applicable MIPS-specified ASEs. */ |
| 573 | { "mips64", 1, bfd_mach_mipsisa64, CPU_MIPS64, |
| 574 | ISA_MIPS64, ASE_MIPS3D | ASE_MDMX, |
| 575 | mips_cp0_names_mips3264, |
| 576 | mips_cp0sel_names_mips3264, ARRAY_SIZE (mips_cp0sel_names_mips3264), |
| 577 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 578 | |
| 579 | { "mips64r2", 1, bfd_mach_mipsisa64r2, CPU_MIPS64R2, |
| 580 | ISA_MIPS64R2, |
| 581 | (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT |
| 582 | | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), |
| 583 | mips_cp0_names_mips3264r2, |
| 584 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 585 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 586 | |
| 587 | { "mips64r3", 1, bfd_mach_mipsisa64r3, CPU_MIPS64R3, |
| 588 | ISA_MIPS64R3, |
| 589 | (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT |
| 590 | | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), |
| 591 | mips_cp0_names_mips3264r2, |
| 592 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 593 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 594 | |
| 595 | { "mips64r5", 1, bfd_mach_mipsisa64r5, CPU_MIPS64R5, |
| 596 | ISA_MIPS64R5, |
| 597 | (ASE_MIPS3D | ASE_DSP | ASE_DSPR2 | ASE_DSP64 | ASE_EVA | ASE_MT |
| 598 | | ASE_MCU | ASE_VIRT | ASE_VIRT64 | ASE_MSA | ASE_MSA64 | ASE_XPA), |
| 599 | mips_cp0_names_mips3264r2, |
| 600 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 601 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 602 | |
| 603 | { "mips64r6", 1, bfd_mach_mipsisa64r6, CPU_MIPS64R6, |
| 604 | ISA_MIPS64R6, |
| 605 | (ASE_EVA | ASE_MSA | ASE_MSA64 | ASE_XPA | ASE_VIRT | ASE_VIRT64 |
| 606 | | ASE_MCU | ASE_MT | ASE_DSP | ASE_DSPR2 | ASE_DSPR3 | ASE_CRC |
| 607 | | ASE_CRC64 | ASE_GINV), |
| 608 | mips_cp0_names_mips3264r2, |
| 609 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 610 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 611 | |
| 612 | { "interaptiv-mr2", 1, bfd_mach_mips_interaptiv_mr2, CPU_INTERAPTIV_MR2, |
| 613 | ISA_MIPS32R3, |
| 614 | ASE_MT | ASE_EVA | ASE_DSP | ASE_DSPR2 | ASE_MIPS16E2 | ASE_MIPS16E2_MT, |
| 615 | mips_cp0_names_mips3264r2, |
| 616 | mips_cp0sel_names_mips3264r2, ARRAY_SIZE (mips_cp0sel_names_mips3264r2), |
| 617 | mips_cp1_names_mips3264, mips_hwr_names_mips3264r2 }, |
| 618 | |
| 619 | { "sb1", 1, bfd_mach_mips_sb1, CPU_SB1, |
| 620 | ISA_MIPS64 | INSN_SB1, ASE_MIPS3D, |
| 621 | mips_cp0_names_sb1, |
| 622 | mips_cp0sel_names_sb1, ARRAY_SIZE (mips_cp0sel_names_sb1), |
| 623 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 624 | |
| 625 | { "loongson2e", 1, bfd_mach_mips_loongson_2e, CPU_LOONGSON_2E, |
| 626 | ISA_MIPS3 | INSN_LOONGSON_2E, 0, mips_cp0_names_numeric, |
| 627 | NULL, 0, mips_cp1_names_numeric, mips_hwr_names_numeric }, |
| 628 | |
| 629 | { "loongson2f", 1, bfd_mach_mips_loongson_2f, CPU_LOONGSON_2F, |
| 630 | ISA_MIPS3 | INSN_LOONGSON_2F, ASE_LOONGSON_MMI, mips_cp0_names_numeric, |
| 631 | NULL, 0, mips_cp1_names_numeric, mips_hwr_names_numeric }, |
| 632 | |
| 633 | /* The loongson3a is an alias of gs464 for compatibility */ |
| 634 | { "loongson3a", 1, bfd_mach_mips_gs464, CPU_GS464, |
| 635 | ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT, |
| 636 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, |
| 637 | mips_hwr_names_numeric }, |
| 638 | |
| 639 | { "gs464", 1, bfd_mach_mips_gs464, CPU_GS464, |
| 640 | ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT, |
| 641 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, |
| 642 | mips_hwr_names_numeric }, |
| 643 | |
| 644 | { "gs464e", 1, bfd_mach_mips_gs464e, CPU_GS464E, |
| 645 | ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT |
| 646 | | ASE_LOONGSON_EXT2, mips_cp0_names_numeric, NULL, 0, mips_cp1_names_mips3264, |
| 647 | mips_hwr_names_numeric }, |
| 648 | |
| 649 | { "gs264e", 1, bfd_mach_mips_gs464e, CPU_GS264E, |
| 650 | ISA_MIPS64R2, ASE_LOONGSON_MMI | ASE_LOONGSON_CAM | ASE_LOONGSON_EXT |
| 651 | | ASE_LOONGSON_EXT2 | ASE_MSA | ASE_MSA64, mips_cp0_names_numeric, NULL, |
| 652 | 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 653 | |
| 654 | { "octeon", 1, bfd_mach_mips_octeon, CPU_OCTEON, |
| 655 | ISA_MIPS64R2 | INSN_OCTEON, 0, mips_cp0_names_numeric, NULL, 0, |
| 656 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 657 | |
| 658 | { "octeon+", 1, bfd_mach_mips_octeonp, CPU_OCTEONP, |
| 659 | ISA_MIPS64R2 | INSN_OCTEONP, 0, mips_cp0_names_numeric, |
| 660 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 661 | |
| 662 | { "octeon2", 1, bfd_mach_mips_octeon2, CPU_OCTEON2, |
| 663 | ISA_MIPS64R2 | INSN_OCTEON2, 0, mips_cp0_names_numeric, |
| 664 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 665 | |
| 666 | { "octeon3", 1, bfd_mach_mips_octeon3, CPU_OCTEON3, |
| 667 | ISA_MIPS64R5 | INSN_OCTEON3, ASE_VIRT | ASE_VIRT64, |
| 668 | mips_cp0_names_numeric, |
| 669 | NULL, 0, mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 670 | |
| 671 | { "xlr", 1, bfd_mach_mips_xlr, CPU_XLR, |
| 672 | ISA_MIPS64 | INSN_XLR, 0, |
| 673 | mips_cp0_names_xlr, |
| 674 | mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), |
| 675 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 676 | |
| 677 | /* XLP is mostly like XLR, with the prominent exception it is being |
| 678 | MIPS64R2. */ |
| 679 | { "xlp", 1, bfd_mach_mips_xlr, CPU_XLR, |
| 680 | ISA_MIPS64R2 | INSN_XLR, 0, |
| 681 | mips_cp0_names_xlr, |
| 682 | mips_cp0sel_names_xlr, ARRAY_SIZE (mips_cp0sel_names_xlr), |
| 683 | mips_cp1_names_mips3264, mips_hwr_names_numeric }, |
| 684 | |
| 685 | /* This entry, mips16, is here only for ISA/processor selection; do |
| 686 | not print its name. */ |
| 687 | { "", 1, bfd_mach_mips16, CPU_MIPS16, ISA_MIPS64, |
| 688 | ASE_MIPS16E2 | ASE_MIPS16E2_MT, |
| 689 | mips_cp0_names_numeric, NULL, 0, mips_cp1_names_numeric, |
| 690 | mips_hwr_names_numeric }, |
| 691 | }; |
| 692 | |
| 693 | /* ISA and processor type to disassemble for, and register names to use. |
| 694 | set_default_mips_dis_options and parse_mips_dis_options fill in these |
| 695 | values. */ |
| 696 | static int mips_processor; |
| 697 | static int mips_isa; |
| 698 | static int mips_ase; |
| 699 | static int micromips_ase; |
| 700 | static const char * const *mips_gpr_names; |
| 701 | static const char * const *mips_fpr_names; |
| 702 | static const char * const *mips_cp0_names; |
| 703 | static const struct mips_cp0sel_name *mips_cp0sel_names; |
| 704 | static int mips_cp0sel_names_len; |
| 705 | static const char * const *mips_cp1_names; |
| 706 | static const char * const *mips_hwr_names; |
| 707 | |
| 708 | /* Other options */ |
| 709 | static int no_aliases; /* If set disassemble as most general inst. */ |
| 710 | \f |
| 711 | static const struct mips_abi_choice * |
| 712 | choose_abi_by_name (const char *name, unsigned int namelen) |
| 713 | { |
| 714 | const struct mips_abi_choice *c; |
| 715 | unsigned int i; |
| 716 | |
| 717 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_abi_choices) && c == NULL; i++) |
| 718 | if (strncmp (mips_abi_choices[i].name, name, namelen) == 0 |
| 719 | && strlen (mips_abi_choices[i].name) == namelen) |
| 720 | c = &mips_abi_choices[i]; |
| 721 | |
| 722 | return c; |
| 723 | } |
| 724 | |
| 725 | static const struct mips_arch_choice * |
| 726 | choose_arch_by_name (const char *name, unsigned int namelen) |
| 727 | { |
| 728 | const struct mips_arch_choice *c = NULL; |
| 729 | unsigned int i; |
| 730 | |
| 731 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) |
| 732 | if (strncmp (mips_arch_choices[i].name, name, namelen) == 0 |
| 733 | && strlen (mips_arch_choices[i].name) == namelen) |
| 734 | c = &mips_arch_choices[i]; |
| 735 | |
| 736 | return c; |
| 737 | } |
| 738 | |
| 739 | static const struct mips_arch_choice * |
| 740 | choose_arch_by_number (unsigned long mach) |
| 741 | { |
| 742 | static unsigned long hint_bfd_mach; |
| 743 | static const struct mips_arch_choice *hint_arch_choice; |
| 744 | const struct mips_arch_choice *c; |
| 745 | unsigned int i; |
| 746 | |
| 747 | /* We optimize this because even if the user specifies no |
| 748 | flags, this will be done for every instruction! */ |
| 749 | if (hint_bfd_mach == mach |
| 750 | && hint_arch_choice != NULL |
| 751 | && hint_arch_choice->bfd_mach == hint_bfd_mach) |
| 752 | return hint_arch_choice; |
| 753 | |
| 754 | for (i = 0, c = NULL; i < ARRAY_SIZE (mips_arch_choices) && c == NULL; i++) |
| 755 | { |
| 756 | if (mips_arch_choices[i].bfd_mach_valid |
| 757 | && mips_arch_choices[i].bfd_mach == mach) |
| 758 | { |
| 759 | c = &mips_arch_choices[i]; |
| 760 | hint_bfd_mach = mach; |
| 761 | hint_arch_choice = c; |
| 762 | } |
| 763 | } |
| 764 | return c; |
| 765 | } |
| 766 | |
| 767 | /* Check if the object uses NewABI conventions. */ |
| 768 | |
| 769 | static int |
| 770 | is_newabi (Elf_Internal_Ehdr *header) |
| 771 | { |
| 772 | /* There are no old-style ABIs which use 64-bit ELF. */ |
| 773 | if (header->e_ident[EI_CLASS] == ELFCLASS64) |
| 774 | return 1; |
| 775 | |
| 776 | /* If a 32-bit ELF file, n32 is a new-style ABI. */ |
| 777 | if ((header->e_flags & EF_MIPS_ABI2) != 0) |
| 778 | return 1; |
| 779 | |
| 780 | return 0; |
| 781 | } |
| 782 | |
| 783 | /* Check if the object has microMIPS ASE code. */ |
| 784 | |
| 785 | static int |
| 786 | is_micromips (Elf_Internal_Ehdr *header) |
| 787 | { |
| 788 | if ((header->e_flags & EF_MIPS_ARCH_ASE_MICROMIPS) != 0) |
| 789 | return 1; |
| 790 | |
| 791 | return 0; |
| 792 | } |
| 793 | |
| 794 | /* Convert ASE flags from .MIPS.abiflags to internal values. */ |
| 795 | |
| 796 | static unsigned long |
| 797 | mips_convert_abiflags_ases (unsigned long afl_ases) |
| 798 | { |
| 799 | unsigned long opcode_ases = 0; |
| 800 | |
| 801 | if (afl_ases & AFL_ASE_DSP) |
| 802 | opcode_ases |= ASE_DSP; |
| 803 | if (afl_ases & AFL_ASE_DSPR2) |
| 804 | opcode_ases |= ASE_DSPR2; |
| 805 | if (afl_ases & AFL_ASE_EVA) |
| 806 | opcode_ases |= ASE_EVA; |
| 807 | if (afl_ases & AFL_ASE_MCU) |
| 808 | opcode_ases |= ASE_MCU; |
| 809 | if (afl_ases & AFL_ASE_MDMX) |
| 810 | opcode_ases |= ASE_MDMX; |
| 811 | if (afl_ases & AFL_ASE_MIPS3D) |
| 812 | opcode_ases |= ASE_MIPS3D; |
| 813 | if (afl_ases & AFL_ASE_MT) |
| 814 | opcode_ases |= ASE_MT; |
| 815 | if (afl_ases & AFL_ASE_SMARTMIPS) |
| 816 | opcode_ases |= ASE_SMARTMIPS; |
| 817 | if (afl_ases & AFL_ASE_VIRT) |
| 818 | opcode_ases |= ASE_VIRT; |
| 819 | if (afl_ases & AFL_ASE_MSA) |
| 820 | opcode_ases |= ASE_MSA; |
| 821 | if (afl_ases & AFL_ASE_XPA) |
| 822 | opcode_ases |= ASE_XPA; |
| 823 | if (afl_ases & AFL_ASE_DSPR3) |
| 824 | opcode_ases |= ASE_DSPR3; |
| 825 | if (afl_ases & AFL_ASE_MIPS16E2) |
| 826 | opcode_ases |= ASE_MIPS16E2; |
| 827 | return opcode_ases; |
| 828 | } |
| 829 | |
| 830 | /* Calculate combination ASE flags from regular ASE flags. */ |
| 831 | |
| 832 | static unsigned long |
| 833 | mips_calculate_combination_ases (int opcode_isa, unsigned long opcode_ases) |
| 834 | { |
| 835 | unsigned long combination_ases = 0; |
| 836 | |
| 837 | if ((opcode_ases & (ASE_XPA | ASE_VIRT)) == (ASE_XPA | ASE_VIRT)) |
| 838 | combination_ases |= ASE_XPA_VIRT; |
| 839 | if ((opcode_ases & (ASE_MIPS16E2 | ASE_MT)) == (ASE_MIPS16E2 | ASE_MT)) |
| 840 | combination_ases |= ASE_MIPS16E2_MT; |
| 841 | if ((opcode_ases & ASE_EVA) |
| 842 | && ((opcode_isa & INSN_ISA_MASK) == ISA_MIPS64R6 |
| 843 | || (opcode_isa & INSN_ISA_MASK) == ISA_MIPS32R6)) |
| 844 | combination_ases |= ASE_EVA_R6; |
| 845 | return combination_ases; |
| 846 | } |
| 847 | |
| 848 | static void |
| 849 | set_default_mips_dis_options (struct disassemble_info *info) |
| 850 | { |
| 851 | const struct mips_arch_choice *chosen_arch; |
| 852 | |
| 853 | /* Defaults: mipsIII/r3000 (?!), no microMIPS ASE (any compressed code |
| 854 | is MIPS16 ASE) (o)32-style ("oldabi") GPR names, and numeric FPR, |
| 855 | CP0 register, and HWR names. */ |
| 856 | mips_isa = ISA_MIPS3; |
| 857 | mips_processor = CPU_R3000; |
| 858 | micromips_ase = 0; |
| 859 | mips_ase = 0; |
| 860 | mips_gpr_names = mips_gpr_names_oldabi; |
| 861 | mips_fpr_names = mips_fpr_names_numeric; |
| 862 | mips_cp0_names = mips_cp0_names_numeric; |
| 863 | mips_cp0sel_names = NULL; |
| 864 | mips_cp0sel_names_len = 0; |
| 865 | mips_cp1_names = mips_cp1_names_numeric; |
| 866 | mips_hwr_names = mips_hwr_names_numeric; |
| 867 | no_aliases = 0; |
| 868 | |
| 869 | /* Set ISA, architecture, and cp0 register names as best we can. */ |
| 870 | #if ! SYMTAB_AVAILABLE |
| 871 | /* This is running out on a target machine, not in a host tool. |
| 872 | FIXME: Where does mips_target_info come from? */ |
| 873 | target_processor = mips_target_info.processor; |
| 874 | mips_isa = mips_target_info.isa; |
| 875 | mips_ase = mips_target_info.ase; |
| 876 | #else |
| 877 | chosen_arch = choose_arch_by_number (info->mach); |
| 878 | if (chosen_arch != NULL) |
| 879 | { |
| 880 | mips_processor = chosen_arch->processor; |
| 881 | mips_isa = chosen_arch->isa; |
| 882 | mips_ase = chosen_arch->ase; |
| 883 | mips_cp0_names = chosen_arch->cp0_names; |
| 884 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 885 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 886 | mips_cp1_names = chosen_arch->cp1_names; |
| 887 | mips_hwr_names = chosen_arch->hwr_names; |
| 888 | } |
| 889 | |
| 890 | /* Update settings according to the ELF file header flags. */ |
| 891 | if (info->flavour == bfd_target_elf_flavour && info->section != NULL) |
| 892 | { |
| 893 | struct bfd *abfd = info->section->owner; |
| 894 | Elf_Internal_Ehdr *header = elf_elfheader (abfd); |
| 895 | Elf_Internal_ABIFlags_v0 *abiflags = NULL; |
| 896 | |
| 897 | /* We won't ever get here if !HAVE_BFD_MIPS_ELF_GET_ABIFLAGS, |
| 898 | because we won't then have a MIPS/ELF BFD, however we need |
| 899 | to guard against a link error in a `--enable-targets=...' |
| 900 | configuration with a 32-bit host where the MIPS target is |
| 901 | a secondary, or with MIPS/ECOFF configurations. */ |
| 902 | #ifdef HAVE_BFD_MIPS_ELF_GET_ABIFLAGS |
| 903 | abiflags = bfd_mips_elf_get_abiflags (abfd); |
| 904 | #endif |
| 905 | /* If an ELF "newabi" binary, use the n32/(n)64 GPR names. */ |
| 906 | if (is_newabi (header)) |
| 907 | mips_gpr_names = mips_gpr_names_newabi; |
| 908 | /* If a microMIPS binary, then don't use MIPS16 bindings. */ |
| 909 | micromips_ase = is_micromips (header); |
| 910 | /* OR in any extra ASE flags set in ELF file structures. */ |
| 911 | if (abiflags) |
| 912 | mips_ase |= mips_convert_abiflags_ases (abiflags->ases); |
| 913 | else if (header->e_flags & EF_MIPS_ARCH_ASE_MDMX) |
| 914 | mips_ase |= ASE_MDMX; |
| 915 | } |
| 916 | #endif |
| 917 | mips_ase |= mips_calculate_combination_ases (mips_isa, mips_ase); |
| 918 | } |
| 919 | |
| 920 | /* Parse an ASE disassembler option and set the corresponding global |
| 921 | ASE flag(s). Return TRUE if successful, FALSE otherwise. */ |
| 922 | |
| 923 | static bfd_boolean |
| 924 | parse_mips_ase_option (const char *option) |
| 925 | { |
| 926 | if (CONST_STRNEQ (option, "msa")) |
| 927 | { |
| 928 | mips_ase |= ASE_MSA; |
| 929 | if ((mips_isa & INSN_ISA_MASK) == ISA_MIPS64R2 |
| 930 | || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R3 |
| 931 | || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R5 |
| 932 | || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R6) |
| 933 | mips_ase |= ASE_MSA64; |
| 934 | return TRUE; |
| 935 | } |
| 936 | |
| 937 | if (CONST_STRNEQ (option, "virt")) |
| 938 | { |
| 939 | mips_ase |= ASE_VIRT; |
| 940 | if (mips_isa & ISA_MIPS64R2 |
| 941 | || mips_isa & ISA_MIPS64R3 |
| 942 | || mips_isa & ISA_MIPS64R5 |
| 943 | || mips_isa & ISA_MIPS64R6) |
| 944 | mips_ase |= ASE_VIRT64; |
| 945 | return TRUE; |
| 946 | } |
| 947 | |
| 948 | if (CONST_STRNEQ (option, "xpa")) |
| 949 | { |
| 950 | mips_ase |= ASE_XPA; |
| 951 | return TRUE; |
| 952 | } |
| 953 | |
| 954 | if (CONST_STRNEQ (option, "ginv")) |
| 955 | { |
| 956 | mips_ase |= ASE_GINV; |
| 957 | return TRUE; |
| 958 | } |
| 959 | |
| 960 | if (CONST_STRNEQ (option, "loongson-mmi")) |
| 961 | { |
| 962 | mips_ase |= ASE_LOONGSON_MMI; |
| 963 | return TRUE; |
| 964 | } |
| 965 | |
| 966 | if (CONST_STRNEQ (option, "loongson-cam")) |
| 967 | { |
| 968 | mips_ase |= ASE_LOONGSON_CAM; |
| 969 | return TRUE; |
| 970 | } |
| 971 | |
| 972 | /* Put here for match ext2 frist */ |
| 973 | if (CONST_STRNEQ (option, "loongson-ext2")) |
| 974 | { |
| 975 | mips_ase |= ASE_LOONGSON_EXT2; |
| 976 | return TRUE; |
| 977 | } |
| 978 | |
| 979 | if (CONST_STRNEQ (option, "loongson-ext")) |
| 980 | { |
| 981 | mips_ase |= ASE_LOONGSON_EXT; |
| 982 | return TRUE; |
| 983 | } |
| 984 | |
| 985 | return FALSE; |
| 986 | } |
| 987 | |
| 988 | static void |
| 989 | parse_mips_dis_option (const char *option, unsigned int len) |
| 990 | { |
| 991 | unsigned int i, optionlen, vallen; |
| 992 | const char *val; |
| 993 | const struct mips_abi_choice *chosen_abi; |
| 994 | const struct mips_arch_choice *chosen_arch; |
| 995 | |
| 996 | /* Try to match options that are simple flags */ |
| 997 | if (CONST_STRNEQ (option, "no-aliases")) |
| 998 | { |
| 999 | no_aliases = 1; |
| 1000 | return; |
| 1001 | } |
| 1002 | |
| 1003 | if (parse_mips_ase_option (option)) |
| 1004 | { |
| 1005 | mips_ase |= mips_calculate_combination_ases (mips_isa, mips_ase); |
| 1006 | return; |
| 1007 | } |
| 1008 | |
| 1009 | /* Look for the = that delimits the end of the option name. */ |
| 1010 | for (i = 0; i < len; i++) |
| 1011 | if (option[i] == '=') |
| 1012 | break; |
| 1013 | |
| 1014 | if (i == 0) /* Invalid option: no name before '='. */ |
| 1015 | return; |
| 1016 | if (i == len) /* Invalid option: no '='. */ |
| 1017 | return; |
| 1018 | if (i == (len - 1)) /* Invalid option: no value after '='. */ |
| 1019 | return; |
| 1020 | |
| 1021 | optionlen = i; |
| 1022 | val = option + (optionlen + 1); |
| 1023 | vallen = len - (optionlen + 1); |
| 1024 | |
| 1025 | if (strncmp ("gpr-names", option, optionlen) == 0 |
| 1026 | && strlen ("gpr-names") == optionlen) |
| 1027 | { |
| 1028 | chosen_abi = choose_abi_by_name (val, vallen); |
| 1029 | if (chosen_abi != NULL) |
| 1030 | mips_gpr_names = chosen_abi->gpr_names; |
| 1031 | return; |
| 1032 | } |
| 1033 | |
| 1034 | if (strncmp ("fpr-names", option, optionlen) == 0 |
| 1035 | && strlen ("fpr-names") == optionlen) |
| 1036 | { |
| 1037 | chosen_abi = choose_abi_by_name (val, vallen); |
| 1038 | if (chosen_abi != NULL) |
| 1039 | mips_fpr_names = chosen_abi->fpr_names; |
| 1040 | return; |
| 1041 | } |
| 1042 | |
| 1043 | if (strncmp ("cp0-names", option, optionlen) == 0 |
| 1044 | && strlen ("cp0-names") == optionlen) |
| 1045 | { |
| 1046 | chosen_arch = choose_arch_by_name (val, vallen); |
| 1047 | if (chosen_arch != NULL) |
| 1048 | { |
| 1049 | mips_cp0_names = chosen_arch->cp0_names; |
| 1050 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 1051 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 1052 | } |
| 1053 | return; |
| 1054 | } |
| 1055 | |
| 1056 | if (strncmp ("cp1-names", option, optionlen) == 0 |
| 1057 | && strlen ("cp1-names") == optionlen) |
| 1058 | { |
| 1059 | chosen_arch = choose_arch_by_name (val, vallen); |
| 1060 | if (chosen_arch != NULL) |
| 1061 | mips_cp1_names = chosen_arch->cp1_names; |
| 1062 | return; |
| 1063 | } |
| 1064 | |
| 1065 | if (strncmp ("hwr-names", option, optionlen) == 0 |
| 1066 | && strlen ("hwr-names") == optionlen) |
| 1067 | { |
| 1068 | chosen_arch = choose_arch_by_name (val, vallen); |
| 1069 | if (chosen_arch != NULL) |
| 1070 | mips_hwr_names = chosen_arch->hwr_names; |
| 1071 | return; |
| 1072 | } |
| 1073 | |
| 1074 | if (strncmp ("reg-names", option, optionlen) == 0 |
| 1075 | && strlen ("reg-names") == optionlen) |
| 1076 | { |
| 1077 | /* We check both ABI and ARCH here unconditionally, so |
| 1078 | that "numeric" will do the desirable thing: select |
| 1079 | numeric register names for all registers. Other than |
| 1080 | that, a given name probably won't match both. */ |
| 1081 | chosen_abi = choose_abi_by_name (val, vallen); |
| 1082 | if (chosen_abi != NULL) |
| 1083 | { |
| 1084 | mips_gpr_names = chosen_abi->gpr_names; |
| 1085 | mips_fpr_names = chosen_abi->fpr_names; |
| 1086 | } |
| 1087 | chosen_arch = choose_arch_by_name (val, vallen); |
| 1088 | if (chosen_arch != NULL) |
| 1089 | { |
| 1090 | mips_cp0_names = chosen_arch->cp0_names; |
| 1091 | mips_cp0sel_names = chosen_arch->cp0sel_names; |
| 1092 | mips_cp0sel_names_len = chosen_arch->cp0sel_names_len; |
| 1093 | mips_cp1_names = chosen_arch->cp1_names; |
| 1094 | mips_hwr_names = chosen_arch->hwr_names; |
| 1095 | } |
| 1096 | return; |
| 1097 | } |
| 1098 | |
| 1099 | /* Invalid option. */ |
| 1100 | } |
| 1101 | |
| 1102 | static void |
| 1103 | parse_mips_dis_options (const char *options) |
| 1104 | { |
| 1105 | const char *option_end; |
| 1106 | |
| 1107 | if (options == NULL) |
| 1108 | return; |
| 1109 | |
| 1110 | while (*options != '\0') |
| 1111 | { |
| 1112 | /* Skip empty options. */ |
| 1113 | if (*options == ',') |
| 1114 | { |
| 1115 | options++; |
| 1116 | continue; |
| 1117 | } |
| 1118 | |
| 1119 | /* We know that *options is neither NUL or a comma. */ |
| 1120 | option_end = options + 1; |
| 1121 | while (*option_end != ',' && *option_end != '\0') |
| 1122 | option_end++; |
| 1123 | |
| 1124 | parse_mips_dis_option (options, option_end - options); |
| 1125 | |
| 1126 | /* Go on to the next one. If option_end points to a comma, it |
| 1127 | will be skipped above. */ |
| 1128 | options = option_end; |
| 1129 | } |
| 1130 | } |
| 1131 | |
| 1132 | static const struct mips_cp0sel_name * |
| 1133 | lookup_mips_cp0sel_name (const struct mips_cp0sel_name *names, |
| 1134 | unsigned int len, |
| 1135 | unsigned int cp0reg, |
| 1136 | unsigned int sel) |
| 1137 | { |
| 1138 | unsigned int i; |
| 1139 | |
| 1140 | for (i = 0; i < len; i++) |
| 1141 | if (names[i].cp0reg == cp0reg && names[i].sel == sel) |
| 1142 | return &names[i]; |
| 1143 | return NULL; |
| 1144 | } |
| 1145 | |
| 1146 | /* Print register REGNO, of type TYPE, for instruction OPCODE. */ |
| 1147 | |
| 1148 | static void |
| 1149 | print_reg (struct disassemble_info *info, const struct mips_opcode *opcode, |
| 1150 | enum mips_reg_operand_type type, int regno) |
| 1151 | { |
| 1152 | switch (type) |
| 1153 | { |
| 1154 | case OP_REG_GP: |
| 1155 | info->fprintf_func (info->stream, "%s", mips_gpr_names[regno]); |
| 1156 | break; |
| 1157 | |
| 1158 | case OP_REG_FP: |
| 1159 | info->fprintf_func (info->stream, "%s", mips_fpr_names[regno]); |
| 1160 | break; |
| 1161 | |
| 1162 | case OP_REG_CCC: |
| 1163 | if (opcode->pinfo & (FP_D | FP_S)) |
| 1164 | info->fprintf_func (info->stream, "$fcc%d", regno); |
| 1165 | else |
| 1166 | info->fprintf_func (info->stream, "$cc%d", regno); |
| 1167 | break; |
| 1168 | |
| 1169 | case OP_REG_VEC: |
| 1170 | if (opcode->membership & INSN_5400) |
| 1171 | info->fprintf_func (info->stream, "$f%d", regno); |
| 1172 | else |
| 1173 | info->fprintf_func (info->stream, "$v%d", regno); |
| 1174 | break; |
| 1175 | |
| 1176 | case OP_REG_ACC: |
| 1177 | info->fprintf_func (info->stream, "$ac%d", regno); |
| 1178 | break; |
| 1179 | |
| 1180 | case OP_REG_COPRO: |
| 1181 | if (opcode->name[strlen (opcode->name) - 1] == '0') |
| 1182 | info->fprintf_func (info->stream, "%s", mips_cp0_names[regno]); |
| 1183 | else if (opcode->name[strlen (opcode->name) - 1] == '1') |
| 1184 | info->fprintf_func (info->stream, "%s", mips_cp1_names[regno]); |
| 1185 | else |
| 1186 | info->fprintf_func (info->stream, "$%d", regno); |
| 1187 | break; |
| 1188 | |
| 1189 | case OP_REG_HW: |
| 1190 | info->fprintf_func (info->stream, "%s", mips_hwr_names[regno]); |
| 1191 | break; |
| 1192 | |
| 1193 | case OP_REG_VF: |
| 1194 | info->fprintf_func (info->stream, "$vf%d", regno); |
| 1195 | break; |
| 1196 | |
| 1197 | case OP_REG_VI: |
| 1198 | info->fprintf_func (info->stream, "$vi%d", regno); |
| 1199 | break; |
| 1200 | |
| 1201 | case OP_REG_R5900_I: |
| 1202 | info->fprintf_func (info->stream, "$I"); |
| 1203 | break; |
| 1204 | |
| 1205 | case OP_REG_R5900_Q: |
| 1206 | info->fprintf_func (info->stream, "$Q"); |
| 1207 | break; |
| 1208 | |
| 1209 | case OP_REG_R5900_R: |
| 1210 | info->fprintf_func (info->stream, "$R"); |
| 1211 | break; |
| 1212 | |
| 1213 | case OP_REG_R5900_ACC: |
| 1214 | info->fprintf_func (info->stream, "$ACC"); |
| 1215 | break; |
| 1216 | |
| 1217 | case OP_REG_MSA: |
| 1218 | info->fprintf_func (info->stream, "$w%d", regno); |
| 1219 | break; |
| 1220 | |
| 1221 | case OP_REG_MSA_CTRL: |
| 1222 | info->fprintf_func (info->stream, "%s", msa_control_names[regno]); |
| 1223 | break; |
| 1224 | |
| 1225 | } |
| 1226 | } |
| 1227 | \f |
| 1228 | /* Used to track the state carried over from previous operands in |
| 1229 | an instruction. */ |
| 1230 | struct mips_print_arg_state { |
| 1231 | /* The value of the last OP_INT seen. We only use this for OP_MSB, |
| 1232 | where the value is known to be unsigned and small. */ |
| 1233 | unsigned int last_int; |
| 1234 | |
| 1235 | /* The type and number of the last OP_REG seen. We only use this for |
| 1236 | OP_REPEAT_DEST_REG and OP_REPEAT_PREV_REG. */ |
| 1237 | enum mips_reg_operand_type last_reg_type; |
| 1238 | unsigned int last_regno; |
| 1239 | unsigned int dest_regno; |
| 1240 | unsigned int seen_dest; |
| 1241 | }; |
| 1242 | |
| 1243 | /* Initialize STATE for the start of an instruction. */ |
| 1244 | |
| 1245 | static inline void |
| 1246 | init_print_arg_state (struct mips_print_arg_state *state) |
| 1247 | { |
| 1248 | memset (state, 0, sizeof (*state)); |
| 1249 | } |
| 1250 | |
| 1251 | /* Print OP_VU0_SUFFIX or OP_VU0_MATCH_SUFFIX operand OPERAND, |
| 1252 | whose value is given by UVAL. */ |
| 1253 | |
| 1254 | static void |
| 1255 | print_vu0_channel (struct disassemble_info *info, |
| 1256 | const struct mips_operand *operand, unsigned int uval) |
| 1257 | { |
| 1258 | if (operand->size == 4) |
| 1259 | info->fprintf_func (info->stream, "%s%s%s%s", |
| 1260 | uval & 8 ? "x" : "", |
| 1261 | uval & 4 ? "y" : "", |
| 1262 | uval & 2 ? "z" : "", |
| 1263 | uval & 1 ? "w" : ""); |
| 1264 | else if (operand->size == 2) |
| 1265 | info->fprintf_func (info->stream, "%c", "xyzw"[uval]); |
| 1266 | else |
| 1267 | abort (); |
| 1268 | } |
| 1269 | |
| 1270 | /* Record information about a register operand. */ |
| 1271 | |
| 1272 | static void |
| 1273 | mips_seen_register (struct mips_print_arg_state *state, |
| 1274 | unsigned int regno, |
| 1275 | enum mips_reg_operand_type reg_type) |
| 1276 | { |
| 1277 | state->last_reg_type = reg_type; |
| 1278 | state->last_regno = regno; |
| 1279 | |
| 1280 | if (!state->seen_dest) |
| 1281 | { |
| 1282 | state->seen_dest = 1; |
| 1283 | state->dest_regno = regno; |
| 1284 | } |
| 1285 | } |
| 1286 | |
| 1287 | /* Print SAVE/RESTORE instruction operands according to the argument |
| 1288 | register mask AMASK, the number of static registers saved NSREG, |
| 1289 | the $ra, $s0 and $s1 register specifiers RA, S0 and S1 respectively, |
| 1290 | and the frame size FRAME_SIZE. */ |
| 1291 | |
| 1292 | static void |
| 1293 | mips_print_save_restore (struct disassemble_info *info, unsigned int amask, |
| 1294 | unsigned int nsreg, unsigned int ra, |
| 1295 | unsigned int s0, unsigned int s1, |
| 1296 | unsigned int frame_size) |
| 1297 | { |
| 1298 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1299 | unsigned int nargs, nstatics, smask, i, j; |
| 1300 | void *is = info->stream; |
| 1301 | const char *sep; |
| 1302 | |
| 1303 | if (amask == MIPS_SVRS_ALL_ARGS) |
| 1304 | { |
| 1305 | nargs = 4; |
| 1306 | nstatics = 0; |
| 1307 | } |
| 1308 | else if (amask == MIPS_SVRS_ALL_STATICS) |
| 1309 | { |
| 1310 | nargs = 0; |
| 1311 | nstatics = 4; |
| 1312 | } |
| 1313 | else |
| 1314 | { |
| 1315 | nargs = amask >> 2; |
| 1316 | nstatics = amask & 3; |
| 1317 | } |
| 1318 | |
| 1319 | sep = ""; |
| 1320 | if (nargs > 0) |
| 1321 | { |
| 1322 | infprintf (is, "%s", mips_gpr_names[4]); |
| 1323 | if (nargs > 1) |
| 1324 | infprintf (is, "-%s", mips_gpr_names[4 + nargs - 1]); |
| 1325 | sep = ","; |
| 1326 | } |
| 1327 | |
| 1328 | infprintf (is, "%s%d", sep, frame_size); |
| 1329 | |
| 1330 | if (ra) /* $ra */ |
| 1331 | infprintf (is, ",%s", mips_gpr_names[31]); |
| 1332 | |
| 1333 | smask = 0; |
| 1334 | if (s0) /* $s0 */ |
| 1335 | smask |= 1 << 0; |
| 1336 | if (s1) /* $s1 */ |
| 1337 | smask |= 1 << 1; |
| 1338 | if (nsreg > 0) /* $s2-$s8 */ |
| 1339 | smask |= ((1 << nsreg) - 1) << 2; |
| 1340 | |
| 1341 | for (i = 0; i < 9; i++) |
| 1342 | if (smask & (1 << i)) |
| 1343 | { |
| 1344 | infprintf (is, ",%s", mips_gpr_names[i == 8 ? 30 : (16 + i)]); |
| 1345 | /* Skip over string of set bits. */ |
| 1346 | for (j = i; smask & (2 << j); j++) |
| 1347 | continue; |
| 1348 | if (j > i) |
| 1349 | infprintf (is, "-%s", mips_gpr_names[j == 8 ? 30 : (16 + j)]); |
| 1350 | i = j + 1; |
| 1351 | } |
| 1352 | /* Statics $ax - $a3. */ |
| 1353 | if (nstatics == 1) |
| 1354 | infprintf (is, ",%s", mips_gpr_names[7]); |
| 1355 | else if (nstatics > 0) |
| 1356 | infprintf (is, ",%s-%s", |
| 1357 | mips_gpr_names[7 - nstatics + 1], |
| 1358 | mips_gpr_names[7]); |
| 1359 | } |
| 1360 | |
| 1361 | |
| 1362 | /* Print operand OPERAND of OPCODE, using STATE to track inter-operand state. |
| 1363 | UVAL is the encoding of the operand (shifted into bit 0) and BASE_PC is |
| 1364 | the base address for OP_PCREL operands. */ |
| 1365 | |
| 1366 | static void |
| 1367 | print_insn_arg (struct disassemble_info *info, |
| 1368 | struct mips_print_arg_state *state, |
| 1369 | const struct mips_opcode *opcode, |
| 1370 | const struct mips_operand *operand, |
| 1371 | bfd_vma base_pc, |
| 1372 | unsigned int uval) |
| 1373 | { |
| 1374 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1375 | void *is = info->stream; |
| 1376 | |
| 1377 | switch (operand->type) |
| 1378 | { |
| 1379 | case OP_INT: |
| 1380 | { |
| 1381 | const struct mips_int_operand *int_op; |
| 1382 | |
| 1383 | int_op = (const struct mips_int_operand *) operand; |
| 1384 | uval = mips_decode_int_operand (int_op, uval); |
| 1385 | state->last_int = uval; |
| 1386 | if (int_op->print_hex) |
| 1387 | infprintf (is, "0x%x", uval); |
| 1388 | else |
| 1389 | infprintf (is, "%d", uval); |
| 1390 | } |
| 1391 | break; |
| 1392 | |
| 1393 | case OP_MAPPED_INT: |
| 1394 | { |
| 1395 | const struct mips_mapped_int_operand *mint_op; |
| 1396 | |
| 1397 | mint_op = (const struct mips_mapped_int_operand *) operand; |
| 1398 | uval = mint_op->int_map[uval]; |
| 1399 | state->last_int = uval; |
| 1400 | if (mint_op->print_hex) |
| 1401 | infprintf (is, "0x%x", uval); |
| 1402 | else |
| 1403 | infprintf (is, "%d", uval); |
| 1404 | } |
| 1405 | break; |
| 1406 | |
| 1407 | case OP_MSB: |
| 1408 | { |
| 1409 | const struct mips_msb_operand *msb_op; |
| 1410 | |
| 1411 | msb_op = (const struct mips_msb_operand *) operand; |
| 1412 | uval += msb_op->bias; |
| 1413 | if (msb_op->add_lsb) |
| 1414 | uval -= state->last_int; |
| 1415 | infprintf (is, "0x%x", uval); |
| 1416 | } |
| 1417 | break; |
| 1418 | |
| 1419 | case OP_REG: |
| 1420 | case OP_OPTIONAL_REG: |
| 1421 | { |
| 1422 | const struct mips_reg_operand *reg_op; |
| 1423 | |
| 1424 | reg_op = (const struct mips_reg_operand *) operand; |
| 1425 | uval = mips_decode_reg_operand (reg_op, uval); |
| 1426 | print_reg (info, opcode, reg_op->reg_type, uval); |
| 1427 | |
| 1428 | mips_seen_register (state, uval, reg_op->reg_type); |
| 1429 | } |
| 1430 | break; |
| 1431 | |
| 1432 | case OP_REG_PAIR: |
| 1433 | { |
| 1434 | const struct mips_reg_pair_operand *pair_op; |
| 1435 | |
| 1436 | pair_op = (const struct mips_reg_pair_operand *) operand; |
| 1437 | print_reg (info, opcode, pair_op->reg_type, |
| 1438 | pair_op->reg1_map[uval]); |
| 1439 | infprintf (is, ","); |
| 1440 | print_reg (info, opcode, pair_op->reg_type, |
| 1441 | pair_op->reg2_map[uval]); |
| 1442 | } |
| 1443 | break; |
| 1444 | |
| 1445 | case OP_PCREL: |
| 1446 | { |
| 1447 | const struct mips_pcrel_operand *pcrel_op; |
| 1448 | |
| 1449 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
| 1450 | info->target = mips_decode_pcrel_operand (pcrel_op, base_pc, uval); |
| 1451 | |
| 1452 | /* For jumps and branches clear the ISA bit except for |
| 1453 | the GDB disassembler. */ |
| 1454 | if (pcrel_op->include_isa_bit |
| 1455 | && info->flavour != bfd_target_unknown_flavour) |
| 1456 | info->target &= -2; |
| 1457 | |
| 1458 | (*info->print_address_func) (info->target, info); |
| 1459 | } |
| 1460 | break; |
| 1461 | |
| 1462 | case OP_PERF_REG: |
| 1463 | infprintf (is, "%d", uval); |
| 1464 | break; |
| 1465 | |
| 1466 | case OP_ADDIUSP_INT: |
| 1467 | { |
| 1468 | int sval; |
| 1469 | |
| 1470 | sval = mips_signed_operand (operand, uval) * 4; |
| 1471 | if (sval >= -8 && sval < 8) |
| 1472 | sval ^= 0x400; |
| 1473 | infprintf (is, "%d", sval); |
| 1474 | break; |
| 1475 | } |
| 1476 | |
| 1477 | case OP_CLO_CLZ_DEST: |
| 1478 | { |
| 1479 | unsigned int reg1, reg2; |
| 1480 | |
| 1481 | reg1 = uval & 31; |
| 1482 | reg2 = uval >> 5; |
| 1483 | /* If one is zero use the other. */ |
| 1484 | if (reg1 == reg2 || reg2 == 0) |
| 1485 | infprintf (is, "%s", mips_gpr_names[reg1]); |
| 1486 | else if (reg1 == 0) |
| 1487 | infprintf (is, "%s", mips_gpr_names[reg2]); |
| 1488 | else |
| 1489 | /* Bogus, result depends on processor. */ |
| 1490 | infprintf (is, "%s or %s", mips_gpr_names[reg1], |
| 1491 | mips_gpr_names[reg2]); |
| 1492 | } |
| 1493 | break; |
| 1494 | |
| 1495 | case OP_SAME_RS_RT: |
| 1496 | case OP_CHECK_PREV: |
| 1497 | case OP_NON_ZERO_REG: |
| 1498 | { |
| 1499 | print_reg (info, opcode, OP_REG_GP, uval & 31); |
| 1500 | mips_seen_register (state, uval, OP_REG_GP); |
| 1501 | } |
| 1502 | break; |
| 1503 | |
| 1504 | case OP_LWM_SWM_LIST: |
| 1505 | if (operand->size == 2) |
| 1506 | { |
| 1507 | if (uval == 0) |
| 1508 | infprintf (is, "%s,%s", |
| 1509 | mips_gpr_names[16], |
| 1510 | mips_gpr_names[31]); |
| 1511 | else |
| 1512 | infprintf (is, "%s-%s,%s", |
| 1513 | mips_gpr_names[16], |
| 1514 | mips_gpr_names[16 + uval], |
| 1515 | mips_gpr_names[31]); |
| 1516 | } |
| 1517 | else |
| 1518 | { |
| 1519 | int s_reg_encode; |
| 1520 | |
| 1521 | s_reg_encode = uval & 0xf; |
| 1522 | if (s_reg_encode != 0) |
| 1523 | { |
| 1524 | if (s_reg_encode == 1) |
| 1525 | infprintf (is, "%s", mips_gpr_names[16]); |
| 1526 | else if (s_reg_encode < 9) |
| 1527 | infprintf (is, "%s-%s", |
| 1528 | mips_gpr_names[16], |
| 1529 | mips_gpr_names[15 + s_reg_encode]); |
| 1530 | else if (s_reg_encode == 9) |
| 1531 | infprintf (is, "%s-%s,%s", |
| 1532 | mips_gpr_names[16], |
| 1533 | mips_gpr_names[23], |
| 1534 | mips_gpr_names[30]); |
| 1535 | else |
| 1536 | infprintf (is, "UNKNOWN"); |
| 1537 | } |
| 1538 | |
| 1539 | if (uval & 0x10) /* For ra. */ |
| 1540 | { |
| 1541 | if (s_reg_encode == 0) |
| 1542 | infprintf (is, "%s", mips_gpr_names[31]); |
| 1543 | else |
| 1544 | infprintf (is, ",%s", mips_gpr_names[31]); |
| 1545 | } |
| 1546 | } |
| 1547 | break; |
| 1548 | |
| 1549 | case OP_ENTRY_EXIT_LIST: |
| 1550 | { |
| 1551 | const char *sep; |
| 1552 | unsigned int amask, smask; |
| 1553 | |
| 1554 | sep = ""; |
| 1555 | amask = (uval >> 3) & 7; |
| 1556 | if (amask > 0 && amask < 5) |
| 1557 | { |
| 1558 | infprintf (is, "%s", mips_gpr_names[4]); |
| 1559 | if (amask > 1) |
| 1560 | infprintf (is, "-%s", mips_gpr_names[amask + 3]); |
| 1561 | sep = ","; |
| 1562 | } |
| 1563 | |
| 1564 | smask = (uval >> 1) & 3; |
| 1565 | if (smask == 3) |
| 1566 | { |
| 1567 | infprintf (is, "%s??", sep); |
| 1568 | sep = ","; |
| 1569 | } |
| 1570 | else if (smask > 0) |
| 1571 | { |
| 1572 | infprintf (is, "%s%s", sep, mips_gpr_names[16]); |
| 1573 | if (smask > 1) |
| 1574 | infprintf (is, "-%s", mips_gpr_names[smask + 15]); |
| 1575 | sep = ","; |
| 1576 | } |
| 1577 | |
| 1578 | if (uval & 1) |
| 1579 | { |
| 1580 | infprintf (is, "%s%s", sep, mips_gpr_names[31]); |
| 1581 | sep = ","; |
| 1582 | } |
| 1583 | |
| 1584 | if (amask == 5 || amask == 6) |
| 1585 | { |
| 1586 | infprintf (is, "%s%s", sep, mips_fpr_names[0]); |
| 1587 | if (amask == 6) |
| 1588 | infprintf (is, "-%s", mips_fpr_names[1]); |
| 1589 | } |
| 1590 | } |
| 1591 | break; |
| 1592 | |
| 1593 | case OP_SAVE_RESTORE_LIST: |
| 1594 | /* Should be handled by the caller due to complex behavior. */ |
| 1595 | abort (); |
| 1596 | |
| 1597 | case OP_MDMX_IMM_REG: |
| 1598 | { |
| 1599 | unsigned int vsel; |
| 1600 | |
| 1601 | vsel = uval >> 5; |
| 1602 | uval &= 31; |
| 1603 | if ((vsel & 0x10) == 0) |
| 1604 | { |
| 1605 | int fmt; |
| 1606 | |
| 1607 | vsel &= 0x0f; |
| 1608 | for (fmt = 0; fmt < 3; fmt++, vsel >>= 1) |
| 1609 | if ((vsel & 1) == 0) |
| 1610 | break; |
| 1611 | print_reg (info, opcode, OP_REG_VEC, uval); |
| 1612 | infprintf (is, "[%d]", vsel >> 1); |
| 1613 | } |
| 1614 | else if ((vsel & 0x08) == 0) |
| 1615 | print_reg (info, opcode, OP_REG_VEC, uval); |
| 1616 | else |
| 1617 | infprintf (is, "0x%x", uval); |
| 1618 | } |
| 1619 | break; |
| 1620 | |
| 1621 | case OP_REPEAT_PREV_REG: |
| 1622 | print_reg (info, opcode, state->last_reg_type, state->last_regno); |
| 1623 | break; |
| 1624 | |
| 1625 | case OP_REPEAT_DEST_REG: |
| 1626 | print_reg (info, opcode, state->last_reg_type, state->dest_regno); |
| 1627 | break; |
| 1628 | |
| 1629 | case OP_PC: |
| 1630 | infprintf (is, "$pc"); |
| 1631 | break; |
| 1632 | |
| 1633 | case OP_REG28: |
| 1634 | print_reg (info, opcode, OP_REG_GP, 28); |
| 1635 | break; |
| 1636 | |
| 1637 | case OP_VU0_SUFFIX: |
| 1638 | case OP_VU0_MATCH_SUFFIX: |
| 1639 | print_vu0_channel (info, operand, uval); |
| 1640 | break; |
| 1641 | |
| 1642 | case OP_IMM_INDEX: |
| 1643 | infprintf (is, "[%d]", uval); |
| 1644 | break; |
| 1645 | |
| 1646 | case OP_REG_INDEX: |
| 1647 | infprintf (is, "["); |
| 1648 | print_reg (info, opcode, OP_REG_GP, uval); |
| 1649 | infprintf (is, "]"); |
| 1650 | break; |
| 1651 | } |
| 1652 | } |
| 1653 | |
| 1654 | /* Validate the arguments for INSN, which is described by OPCODE. |
| 1655 | Use DECODE_OPERAND to get the encoding of each operand. */ |
| 1656 | |
| 1657 | static bfd_boolean |
| 1658 | validate_insn_args (const struct mips_opcode *opcode, |
| 1659 | const struct mips_operand *(*decode_operand) (const char *), |
| 1660 | unsigned int insn) |
| 1661 | { |
| 1662 | struct mips_print_arg_state state; |
| 1663 | const struct mips_operand *operand; |
| 1664 | const char *s; |
| 1665 | unsigned int uval; |
| 1666 | |
| 1667 | init_print_arg_state (&state); |
| 1668 | for (s = opcode->args; *s; ++s) |
| 1669 | { |
| 1670 | switch (*s) |
| 1671 | { |
| 1672 | case ',': |
| 1673 | case '(': |
| 1674 | case ')': |
| 1675 | break; |
| 1676 | |
| 1677 | case '#': |
| 1678 | ++s; |
| 1679 | break; |
| 1680 | |
| 1681 | default: |
| 1682 | operand = decode_operand (s); |
| 1683 | |
| 1684 | if (operand) |
| 1685 | { |
| 1686 | uval = mips_extract_operand (operand, insn); |
| 1687 | switch (operand->type) |
| 1688 | { |
| 1689 | case OP_REG: |
| 1690 | case OP_OPTIONAL_REG: |
| 1691 | { |
| 1692 | const struct mips_reg_operand *reg_op; |
| 1693 | |
| 1694 | reg_op = (const struct mips_reg_operand *) operand; |
| 1695 | uval = mips_decode_reg_operand (reg_op, uval); |
| 1696 | mips_seen_register (&state, uval, reg_op->reg_type); |
| 1697 | } |
| 1698 | break; |
| 1699 | |
| 1700 | case OP_SAME_RS_RT: |
| 1701 | { |
| 1702 | unsigned int reg1, reg2; |
| 1703 | |
| 1704 | reg1 = uval & 31; |
| 1705 | reg2 = uval >> 5; |
| 1706 | |
| 1707 | if (reg1 != reg2 || reg1 == 0) |
| 1708 | return FALSE; |
| 1709 | } |
| 1710 | break; |
| 1711 | |
| 1712 | case OP_CHECK_PREV: |
| 1713 | { |
| 1714 | const struct mips_check_prev_operand *prev_op; |
| 1715 | |
| 1716 | prev_op = (const struct mips_check_prev_operand *) operand; |
| 1717 | |
| 1718 | if (!prev_op->zero_ok && uval == 0) |
| 1719 | return FALSE; |
| 1720 | |
| 1721 | if (((prev_op->less_than_ok && uval < state.last_regno) |
| 1722 | || (prev_op->greater_than_ok && uval > state.last_regno) |
| 1723 | || (prev_op->equal_ok && uval == state.last_regno))) |
| 1724 | break; |
| 1725 | |
| 1726 | return FALSE; |
| 1727 | } |
| 1728 | |
| 1729 | case OP_NON_ZERO_REG: |
| 1730 | { |
| 1731 | if (uval == 0) |
| 1732 | return FALSE; |
| 1733 | } |
| 1734 | break; |
| 1735 | |
| 1736 | case OP_INT: |
| 1737 | case OP_MAPPED_INT: |
| 1738 | case OP_MSB: |
| 1739 | case OP_REG_PAIR: |
| 1740 | case OP_PCREL: |
| 1741 | case OP_PERF_REG: |
| 1742 | case OP_ADDIUSP_INT: |
| 1743 | case OP_CLO_CLZ_DEST: |
| 1744 | case OP_LWM_SWM_LIST: |
| 1745 | case OP_ENTRY_EXIT_LIST: |
| 1746 | case OP_MDMX_IMM_REG: |
| 1747 | case OP_REPEAT_PREV_REG: |
| 1748 | case OP_REPEAT_DEST_REG: |
| 1749 | case OP_PC: |
| 1750 | case OP_REG28: |
| 1751 | case OP_VU0_SUFFIX: |
| 1752 | case OP_VU0_MATCH_SUFFIX: |
| 1753 | case OP_IMM_INDEX: |
| 1754 | case OP_REG_INDEX: |
| 1755 | case OP_SAVE_RESTORE_LIST: |
| 1756 | break; |
| 1757 | } |
| 1758 | } |
| 1759 | if (*s == 'm' || *s == '+' || *s == '-') |
| 1760 | ++s; |
| 1761 | } |
| 1762 | } |
| 1763 | return TRUE; |
| 1764 | } |
| 1765 | |
| 1766 | /* Print the arguments for INSN, which is described by OPCODE. |
| 1767 | Use DECODE_OPERAND to get the encoding of each operand. Use BASE_PC |
| 1768 | as the base of OP_PCREL operands, adjusting by LENGTH if the OP_PCREL |
| 1769 | operand is for a branch or jump. */ |
| 1770 | |
| 1771 | static void |
| 1772 | print_insn_args (struct disassemble_info *info, |
| 1773 | const struct mips_opcode *opcode, |
| 1774 | const struct mips_operand *(*decode_operand) (const char *), |
| 1775 | unsigned int insn, bfd_vma insn_pc, unsigned int length) |
| 1776 | { |
| 1777 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1778 | void *is = info->stream; |
| 1779 | struct mips_print_arg_state state; |
| 1780 | const struct mips_operand *operand; |
| 1781 | const char *s; |
| 1782 | |
| 1783 | init_print_arg_state (&state); |
| 1784 | for (s = opcode->args; *s; ++s) |
| 1785 | { |
| 1786 | switch (*s) |
| 1787 | { |
| 1788 | case ',': |
| 1789 | case '(': |
| 1790 | case ')': |
| 1791 | infprintf (is, "%c", *s); |
| 1792 | break; |
| 1793 | |
| 1794 | case '#': |
| 1795 | ++s; |
| 1796 | infprintf (is, "%c%c", *s, *s); |
| 1797 | break; |
| 1798 | |
| 1799 | default: |
| 1800 | operand = decode_operand (s); |
| 1801 | if (!operand) |
| 1802 | { |
| 1803 | /* xgettext:c-format */ |
| 1804 | infprintf (is, |
| 1805 | _("# internal error, undefined operand in `%s %s'"), |
| 1806 | opcode->name, opcode->args); |
| 1807 | return; |
| 1808 | } |
| 1809 | |
| 1810 | if (operand->type == OP_SAVE_RESTORE_LIST) |
| 1811 | { |
| 1812 | /* Handle this case here because of the complex behavior. */ |
| 1813 | unsigned int amask = (insn >> 15) & 0xf; |
| 1814 | unsigned int nsreg = (insn >> 23) & 0x7; |
| 1815 | unsigned int ra = insn & 0x1000; /* $ra */ |
| 1816 | unsigned int s0 = insn & 0x800; /* $s0 */ |
| 1817 | unsigned int s1 = insn & 0x400; /* $s1 */ |
| 1818 | unsigned int frame_size = (((insn >> 15) & 0xf0) |
| 1819 | | ((insn >> 6) & 0x0f)) * 8; |
| 1820 | mips_print_save_restore (info, amask, nsreg, ra, s0, s1, |
| 1821 | frame_size); |
| 1822 | } |
| 1823 | else if (operand->type == OP_REG |
| 1824 | && s[1] == ',' |
| 1825 | && s[2] == 'H' |
| 1826 | && opcode->name[strlen (opcode->name) - 1] == '0') |
| 1827 | { |
| 1828 | /* Coprocessor register 0 with sel field. */ |
| 1829 | const struct mips_cp0sel_name *n; |
| 1830 | unsigned int reg, sel; |
| 1831 | |
| 1832 | reg = mips_extract_operand (operand, insn); |
| 1833 | s += 2; |
| 1834 | operand = decode_operand (s); |
| 1835 | sel = mips_extract_operand (operand, insn); |
| 1836 | |
| 1837 | /* CP0 register including 'sel' code for mftc0, to be |
| 1838 | printed textually if known. If not known, print both |
| 1839 | CP0 register name and sel numerically since CP0 register |
| 1840 | with sel 0 may have a name unrelated to register being |
| 1841 | printed. */ |
| 1842 | n = lookup_mips_cp0sel_name (mips_cp0sel_names, |
| 1843 | mips_cp0sel_names_len, |
| 1844 | reg, sel); |
| 1845 | if (n != NULL) |
| 1846 | infprintf (is, "%s", n->name); |
| 1847 | else |
| 1848 | infprintf (is, "$%d,%d", reg, sel); |
| 1849 | } |
| 1850 | else |
| 1851 | { |
| 1852 | bfd_vma base_pc = insn_pc; |
| 1853 | |
| 1854 | /* Adjust the PC relative base so that branch/jump insns use |
| 1855 | the following PC as the base but genuinely PC relative |
| 1856 | operands use the current PC. */ |
| 1857 | if (operand->type == OP_PCREL) |
| 1858 | { |
| 1859 | const struct mips_pcrel_operand *pcrel_op; |
| 1860 | |
| 1861 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
| 1862 | /* The include_isa_bit flag is sufficient to distinguish |
| 1863 | branch/jump from other PC relative operands. */ |
| 1864 | if (pcrel_op->include_isa_bit) |
| 1865 | base_pc += length; |
| 1866 | } |
| 1867 | |
| 1868 | print_insn_arg (info, &state, opcode, operand, base_pc, |
| 1869 | mips_extract_operand (operand, insn)); |
| 1870 | } |
| 1871 | if (*s == 'm' || *s == '+' || *s == '-') |
| 1872 | ++s; |
| 1873 | break; |
| 1874 | } |
| 1875 | } |
| 1876 | } |
| 1877 | \f |
| 1878 | /* Print the mips instruction at address MEMADDR in debugged memory, |
| 1879 | on using INFO. Returns length of the instruction, in bytes, which is |
| 1880 | always INSNLEN. BIGENDIAN must be 1 if this is big-endian code, 0 if |
| 1881 | this is little-endian code. */ |
| 1882 | |
| 1883 | static int |
| 1884 | print_insn_mips (bfd_vma memaddr, |
| 1885 | int word, |
| 1886 | struct disassemble_info *info) |
| 1887 | { |
| 1888 | #define GET_OP(insn, field) \ |
| 1889 | (((insn) >> OP_SH_##field) & OP_MASK_##field) |
| 1890 | static const struct mips_opcode *mips_hash[OP_MASK_OP + 1]; |
| 1891 | const fprintf_ftype infprintf = info->fprintf_func; |
| 1892 | const struct mips_opcode *op; |
| 1893 | static bfd_boolean init = 0; |
| 1894 | void *is = info->stream; |
| 1895 | |
| 1896 | /* Build a hash table to shorten the search time. */ |
| 1897 | if (! init) |
| 1898 | { |
| 1899 | unsigned int i; |
| 1900 | |
| 1901 | for (i = 0; i <= OP_MASK_OP; i++) |
| 1902 | { |
| 1903 | for (op = mips_opcodes; op < &mips_opcodes[NUMOPCODES]; op++) |
| 1904 | { |
| 1905 | if (op->pinfo == INSN_MACRO |
| 1906 | || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) |
| 1907 | continue; |
| 1908 | if (i == GET_OP (op->match, OP)) |
| 1909 | { |
| 1910 | mips_hash[i] = op; |
| 1911 | break; |
| 1912 | } |
| 1913 | } |
| 1914 | } |
| 1915 | |
| 1916 | init = 1; |
| 1917 | } |
| 1918 | |
| 1919 | info->bytes_per_chunk = INSNLEN; |
| 1920 | info->display_endian = info->endian; |
| 1921 | info->insn_info_valid = 1; |
| 1922 | info->branch_delay_insns = 0; |
| 1923 | info->data_size = 0; |
| 1924 | info->insn_type = dis_nonbranch; |
| 1925 | info->target = 0; |
| 1926 | info->target2 = 0; |
| 1927 | |
| 1928 | op = mips_hash[GET_OP (word, OP)]; |
| 1929 | if (op != NULL) |
| 1930 | { |
| 1931 | for (; op < &mips_opcodes[NUMOPCODES]; op++) |
| 1932 | { |
| 1933 | if (op->pinfo != INSN_MACRO |
| 1934 | && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) |
| 1935 | && (word & op->mask) == op->match) |
| 1936 | { |
| 1937 | /* We always disassemble the jalx instruction, except for MIPS r6. */ |
| 1938 | if (!opcode_is_member (op, mips_isa, mips_ase, mips_processor) |
| 1939 | && (strcmp (op->name, "jalx") |
| 1940 | || (mips_isa & INSN_ISA_MASK) == ISA_MIPS32R6 |
| 1941 | || (mips_isa & INSN_ISA_MASK) == ISA_MIPS64R6)) |
| 1942 | continue; |
| 1943 | |
| 1944 | /* Figure out instruction type and branch delay information. */ |
| 1945 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) |
| 1946 | { |
| 1947 | if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) |
| 1948 | info->insn_type = dis_jsr; |
| 1949 | else |
| 1950 | info->insn_type = dis_branch; |
| 1951 | info->branch_delay_insns = 1; |
| 1952 | } |
| 1953 | else if ((op->pinfo & (INSN_COND_BRANCH_DELAY |
| 1954 | | INSN_COND_BRANCH_LIKELY)) != 0) |
| 1955 | { |
| 1956 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 1957 | info->insn_type = dis_condjsr; |
| 1958 | else |
| 1959 | info->insn_type = dis_condbranch; |
| 1960 | info->branch_delay_insns = 1; |
| 1961 | } |
| 1962 | else if ((op->pinfo & (INSN_STORE_MEMORY |
| 1963 | | INSN_LOAD_MEMORY)) != 0) |
| 1964 | info->insn_type = dis_dref; |
| 1965 | |
| 1966 | if (!validate_insn_args (op, decode_mips_operand, word)) |
| 1967 | continue; |
| 1968 | |
| 1969 | infprintf (is, "%s", op->name); |
| 1970 | if (op->pinfo2 & INSN2_VU0_CHANNEL_SUFFIX) |
| 1971 | { |
| 1972 | unsigned int uval; |
| 1973 | |
| 1974 | infprintf (is, "."); |
| 1975 | uval = mips_extract_operand (&mips_vu0_channel_mask, word); |
| 1976 | print_vu0_channel (info, &mips_vu0_channel_mask, uval); |
| 1977 | } |
| 1978 | |
| 1979 | if (op->args[0]) |
| 1980 | { |
| 1981 | infprintf (is, "\t"); |
| 1982 | print_insn_args (info, op, decode_mips_operand, word, |
| 1983 | memaddr, 4); |
| 1984 | } |
| 1985 | |
| 1986 | return INSNLEN; |
| 1987 | } |
| 1988 | } |
| 1989 | } |
| 1990 | #undef GET_OP |
| 1991 | |
| 1992 | /* Handle undefined instructions. */ |
| 1993 | info->insn_type = dis_noninsn; |
| 1994 | infprintf (is, "0x%x", word); |
| 1995 | return INSNLEN; |
| 1996 | } |
| 1997 | \f |
| 1998 | /* Disassemble an operand for a mips16 instruction. */ |
| 1999 | |
| 2000 | static void |
| 2001 | print_mips16_insn_arg (struct disassemble_info *info, |
| 2002 | struct mips_print_arg_state *state, |
| 2003 | const struct mips_opcode *opcode, |
| 2004 | char type, bfd_vma memaddr, |
| 2005 | unsigned insn, bfd_boolean use_extend, |
| 2006 | unsigned extend, bfd_boolean is_offset) |
| 2007 | { |
| 2008 | const fprintf_ftype infprintf = info->fprintf_func; |
| 2009 | void *is = info->stream; |
| 2010 | const struct mips_operand *operand, *ext_operand; |
| 2011 | unsigned short ext_size; |
| 2012 | unsigned int uval; |
| 2013 | bfd_vma baseaddr; |
| 2014 | |
| 2015 | if (!use_extend) |
| 2016 | extend = 0; |
| 2017 | |
| 2018 | switch (type) |
| 2019 | { |
| 2020 | case ',': |
| 2021 | case '(': |
| 2022 | case ')': |
| 2023 | infprintf (is, "%c", type); |
| 2024 | break; |
| 2025 | |
| 2026 | default: |
| 2027 | operand = decode_mips16_operand (type, FALSE); |
| 2028 | if (!operand) |
| 2029 | { |
| 2030 | /* xgettext:c-format */ |
| 2031 | infprintf (is, _("# internal error, undefined operand in `%s %s'"), |
| 2032 | opcode->name, opcode->args); |
| 2033 | return; |
| 2034 | } |
| 2035 | |
| 2036 | if (operand->type == OP_SAVE_RESTORE_LIST) |
| 2037 | { |
| 2038 | /* Handle this case here because of the complex interaction |
| 2039 | with the EXTEND opcode. */ |
| 2040 | unsigned int amask = extend & 0xf; |
| 2041 | unsigned int nsreg = (extend >> 8) & 0x7; |
| 2042 | unsigned int ra = insn & 0x40; /* $ra */ |
| 2043 | unsigned int s0 = insn & 0x20; /* $s0 */ |
| 2044 | unsigned int s1 = insn & 0x10; /* $s1 */ |
| 2045 | unsigned int frame_size = ((extend & 0xf0) | (insn & 0x0f)) * 8; |
| 2046 | if (frame_size == 0 && !use_extend) |
| 2047 | frame_size = 128; |
| 2048 | mips_print_save_restore (info, amask, nsreg, ra, s0, s1, frame_size); |
| 2049 | break; |
| 2050 | } |
| 2051 | |
| 2052 | if (is_offset && operand->type == OP_INT) |
| 2053 | { |
| 2054 | const struct mips_int_operand *int_op; |
| 2055 | |
| 2056 | int_op = (const struct mips_int_operand *) operand; |
| 2057 | info->insn_type = dis_dref; |
| 2058 | info->data_size = 1 << int_op->shift; |
| 2059 | } |
| 2060 | |
| 2061 | ext_size = 0; |
| 2062 | if (use_extend) |
| 2063 | { |
| 2064 | ext_operand = decode_mips16_operand (type, TRUE); |
| 2065 | if (ext_operand != operand |
| 2066 | || (operand->type == OP_INT && operand->lsb == 0 |
| 2067 | && mips_opcode_32bit_p (opcode))) |
| 2068 | { |
| 2069 | ext_size = ext_operand->size; |
| 2070 | operand = ext_operand; |
| 2071 | } |
| 2072 | } |
| 2073 | if (operand->size == 26) |
| 2074 | uval = ((extend & 0x1f) << 21) | ((extend & 0x3e0) << 11) | insn; |
| 2075 | else if (ext_size == 16 || ext_size == 9) |
| 2076 | uval = ((extend & 0x1f) << 11) | (extend & 0x7e0) | (insn & 0x1f); |
| 2077 | else if (ext_size == 15) |
| 2078 | uval = ((extend & 0xf) << 11) | (extend & 0x7f0) | (insn & 0xf); |
| 2079 | else if (ext_size == 6) |
| 2080 | uval = ((extend >> 6) & 0x1f) | (extend & 0x20); |
| 2081 | else |
| 2082 | uval = mips_extract_operand (operand, (extend << 16) | insn); |
| 2083 | if (ext_size == 9) |
| 2084 | uval &= (1U << ext_size) - 1; |
| 2085 | |
| 2086 | baseaddr = memaddr + 2; |
| 2087 | if (operand->type == OP_PCREL) |
| 2088 | { |
| 2089 | const struct mips_pcrel_operand *pcrel_op; |
| 2090 | |
| 2091 | pcrel_op = (const struct mips_pcrel_operand *) operand; |
| 2092 | if (!pcrel_op->include_isa_bit && use_extend) |
| 2093 | baseaddr = memaddr - 2; |
| 2094 | else if (!pcrel_op->include_isa_bit) |
| 2095 | { |
| 2096 | bfd_byte buffer[2]; |
| 2097 | |
| 2098 | /* If this instruction is in the delay slot of a JAL/JALX |
| 2099 | instruction, the base address is the address of the |
| 2100 | JAL/JALX instruction. If it is in the delay slot of |
| 2101 | a JR/JALR instruction, the base address is the address |
| 2102 | of the JR/JALR instruction. This test is unreliable: |
| 2103 | we have no way of knowing whether the previous word is |
| 2104 | instruction or data. */ |
| 2105 | if (info->read_memory_func (memaddr - 4, buffer, 2, info) == 0 |
| 2106 | && (((info->endian == BFD_ENDIAN_BIG |
| 2107 | ? bfd_getb16 (buffer) |
| 2108 | : bfd_getl16 (buffer)) |
| 2109 | & 0xf800) == 0x1800)) |
| 2110 | baseaddr = memaddr - 4; |
| 2111 | else if (info->read_memory_func (memaddr - 2, buffer, 2, |
| 2112 | info) == 0 |
| 2113 | && (((info->endian == BFD_ENDIAN_BIG |
| 2114 | ? bfd_getb16 (buffer) |
| 2115 | : bfd_getl16 (buffer)) |
| 2116 | & 0xf89f) == 0xe800) |
| 2117 | && (((info->endian == BFD_ENDIAN_BIG |
| 2118 | ? bfd_getb16 (buffer) |
| 2119 | : bfd_getl16 (buffer)) |
| 2120 | & 0x0060) != 0x0060)) |
| 2121 | baseaddr = memaddr - 2; |
| 2122 | else |
| 2123 | baseaddr = memaddr; |
| 2124 | } |
| 2125 | } |
| 2126 | |
| 2127 | print_insn_arg (info, state, opcode, operand, baseaddr + 1, uval); |
| 2128 | break; |
| 2129 | } |
| 2130 | } |
| 2131 | |
| 2132 | |
| 2133 | /* Check if the given address is the last word of a MIPS16 PLT entry. |
| 2134 | This word is data and depending on the value it may interfere with |
| 2135 | disassembly of further PLT entries. We make use of the fact PLT |
| 2136 | symbols are marked BSF_SYNTHETIC. */ |
| 2137 | static bfd_boolean |
| 2138 | is_mips16_plt_tail (struct disassemble_info *info, bfd_vma addr) |
| 2139 | { |
| 2140 | if (info->symbols |
| 2141 | && info->symbols[0] |
| 2142 | && (info->symbols[0]->flags & BSF_SYNTHETIC) |
| 2143 | && addr == bfd_asymbol_value (info->symbols[0]) + 12) |
| 2144 | return TRUE; |
| 2145 | |
| 2146 | return FALSE; |
| 2147 | } |
| 2148 | |
| 2149 | /* Whether none, a 32-bit or a 16-bit instruction match has been done. */ |
| 2150 | |
| 2151 | enum match_kind |
| 2152 | { |
| 2153 | MATCH_NONE, |
| 2154 | MATCH_FULL, |
| 2155 | MATCH_SHORT |
| 2156 | }; |
| 2157 | |
| 2158 | /* Disassemble mips16 instructions. */ |
| 2159 | |
| 2160 | static int |
| 2161 | print_insn_mips16 (bfd_vma memaddr, struct disassemble_info *info) |
| 2162 | { |
| 2163 | const fprintf_ftype infprintf = info->fprintf_func; |
| 2164 | int status; |
| 2165 | bfd_byte buffer[4]; |
| 2166 | const struct mips_opcode *op, *opend; |
| 2167 | struct mips_print_arg_state state; |
| 2168 | void *is = info->stream; |
| 2169 | bfd_boolean have_second; |
| 2170 | bfd_boolean extend_only; |
| 2171 | unsigned int second; |
| 2172 | unsigned int first; |
| 2173 | unsigned int full; |
| 2174 | |
| 2175 | info->bytes_per_chunk = 2; |
| 2176 | info->display_endian = info->endian; |
| 2177 | info->insn_info_valid = 1; |
| 2178 | info->branch_delay_insns = 0; |
| 2179 | info->data_size = 0; |
| 2180 | info->target = 0; |
| 2181 | info->target2 = 0; |
| 2182 | |
| 2183 | #define GET_OP(insn, field) \ |
| 2184 | (((insn) >> MIPS16OP_SH_##field) & MIPS16OP_MASK_##field) |
| 2185 | /* Decode PLT entry's GOT slot address word. */ |
| 2186 | if (is_mips16_plt_tail (info, memaddr)) |
| 2187 | { |
| 2188 | info->insn_type = dis_noninsn; |
| 2189 | status = (*info->read_memory_func) (memaddr, buffer, 4, info); |
| 2190 | if (status == 0) |
| 2191 | { |
| 2192 | unsigned int gotslot; |
| 2193 | |
| 2194 | if (info->endian == BFD_ENDIAN_BIG) |
| 2195 | gotslot = bfd_getb32 (buffer); |
| 2196 | else |
| 2197 | gotslot = bfd_getl32 (buffer); |
| 2198 | infprintf (is, ".word\t0x%x", gotslot); |
| 2199 | |
| 2200 | return 4; |
| 2201 | } |
| 2202 | } |
| 2203 | else |
| 2204 | { |
| 2205 | info->insn_type = dis_nonbranch; |
| 2206 | status = (*info->read_memory_func) (memaddr, buffer, 2, info); |
| 2207 | } |
| 2208 | if (status != 0) |
| 2209 | { |
| 2210 | (*info->memory_error_func) (status, memaddr, info); |
| 2211 | return -1; |
| 2212 | } |
| 2213 | |
| 2214 | extend_only = FALSE; |
| 2215 | |
| 2216 | if (info->endian == BFD_ENDIAN_BIG) |
| 2217 | first = bfd_getb16 (buffer); |
| 2218 | else |
| 2219 | first = bfd_getl16 (buffer); |
| 2220 | |
| 2221 | status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); |
| 2222 | if (status == 0) |
| 2223 | { |
| 2224 | have_second = TRUE; |
| 2225 | if (info->endian == BFD_ENDIAN_BIG) |
| 2226 | second = bfd_getb16 (buffer); |
| 2227 | else |
| 2228 | second = bfd_getl16 (buffer); |
| 2229 | full = (first << 16) | second; |
| 2230 | } |
| 2231 | else |
| 2232 | { |
| 2233 | have_second = FALSE; |
| 2234 | second = 0; |
| 2235 | full = first; |
| 2236 | } |
| 2237 | |
| 2238 | /* FIXME: Should probably use a hash table on the major opcode here. */ |
| 2239 | |
| 2240 | opend = mips16_opcodes + bfd_mips16_num_opcodes; |
| 2241 | for (op = mips16_opcodes; op < opend; op++) |
| 2242 | { |
| 2243 | enum match_kind match; |
| 2244 | |
| 2245 | if (!opcode_is_member (op, mips_isa, mips_ase, mips_processor)) |
| 2246 | continue; |
| 2247 | |
| 2248 | if (op->pinfo == INSN_MACRO |
| 2249 | || (no_aliases && (op->pinfo2 & INSN2_ALIAS))) |
| 2250 | match = MATCH_NONE; |
| 2251 | else if (mips_opcode_32bit_p (op)) |
| 2252 | { |
| 2253 | if (have_second |
| 2254 | && (full & op->mask) == op->match) |
| 2255 | match = MATCH_FULL; |
| 2256 | else |
| 2257 | match = MATCH_NONE; |
| 2258 | } |
| 2259 | else if ((first & op->mask) == op->match) |
| 2260 | { |
| 2261 | match = MATCH_SHORT; |
| 2262 | second = 0; |
| 2263 | full = first; |
| 2264 | } |
| 2265 | else if ((first & 0xf800) == 0xf000 |
| 2266 | && have_second |
| 2267 | && !extend_only |
| 2268 | && (second & op->mask) == op->match) |
| 2269 | { |
| 2270 | if (op->pinfo2 & INSN2_SHORT_ONLY) |
| 2271 | { |
| 2272 | match = MATCH_NONE; |
| 2273 | extend_only = TRUE; |
| 2274 | } |
| 2275 | else |
| 2276 | match = MATCH_FULL; |
| 2277 | } |
| 2278 | else |
| 2279 | match = MATCH_NONE; |
| 2280 | |
| 2281 | if (match != MATCH_NONE) |
| 2282 | { |
| 2283 | const char *s; |
| 2284 | |
| 2285 | infprintf (is, "%s", op->name); |
| 2286 | if (op->args[0] != '\0') |
| 2287 | infprintf (is, "\t"); |
| 2288 | |
| 2289 | init_print_arg_state (&state); |
| 2290 | for (s = op->args; *s != '\0'; s++) |
| 2291 | { |
| 2292 | if (*s == ',' |
| 2293 | && s[1] == 'w' |
| 2294 | && GET_OP (full, RX) == GET_OP (full, RY)) |
| 2295 | { |
| 2296 | /* Skip the register and the comma. */ |
| 2297 | ++s; |
| 2298 | continue; |
| 2299 | } |
| 2300 | if (*s == ',' |
| 2301 | && s[1] == 'v' |
| 2302 | && GET_OP (full, RZ) == GET_OP (full, RX)) |
| 2303 | { |
| 2304 | /* Skip the register and the comma. */ |
| 2305 | ++s; |
| 2306 | continue; |
| 2307 | } |
| 2308 | if (s[0] == 'N' |
| 2309 | && s[1] == ',' |
| 2310 | && s[2] == 'O' |
| 2311 | && op->name[strlen (op->name) - 1] == '0') |
| 2312 | { |
| 2313 | /* Coprocessor register 0 with sel field. */ |
| 2314 | const struct mips_cp0sel_name *n; |
| 2315 | const struct mips_operand *operand; |
| 2316 | unsigned int reg, sel; |
| 2317 | |
| 2318 | operand = decode_mips16_operand (*s, TRUE); |
| 2319 | reg = mips_extract_operand (operand, (first << 16) | second); |
| 2320 | s += 2; |
| 2321 | operand = decode_mips16_operand (*s, TRUE); |
| 2322 | sel = mips_extract_operand (operand, (first << 16) | second); |
| 2323 | |
| 2324 | /* CP0 register including 'sel' code for mftc0, to be |
| 2325 | printed textually if known. If not known, print both |
| 2326 | CP0 register name and sel numerically since CP0 register |
| 2327 | with sel 0 may have a name unrelated to register being |
| 2328 | printed. */ |
| 2329 | n = lookup_mips_cp0sel_name (mips_cp0sel_names, |
| 2330 | mips_cp0sel_names_len, |
| 2331 | reg, sel); |
| 2332 | if (n != NULL) |
| 2333 | infprintf (is, "%s", n->name); |
| 2334 | else |
| 2335 | infprintf (is, "$%d,%d", reg, sel); |
| 2336 | } |
| 2337 | else |
| 2338 | switch (match) |
| 2339 | { |
| 2340 | case MATCH_FULL: |
| 2341 | print_mips16_insn_arg (info, &state, op, *s, memaddr + 2, |
| 2342 | second, TRUE, first, s[1] == '('); |
| 2343 | break; |
| 2344 | case MATCH_SHORT: |
| 2345 | print_mips16_insn_arg (info, &state, op, *s, memaddr, |
| 2346 | first, FALSE, 0, s[1] == '('); |
| 2347 | break; |
| 2348 | case MATCH_NONE: /* Stop the compiler complaining. */ |
| 2349 | break; |
| 2350 | } |
| 2351 | } |
| 2352 | |
| 2353 | /* Figure out branch instruction type and delay slot information. */ |
| 2354 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0) |
| 2355 | info->branch_delay_insns = 1; |
| 2356 | if ((op->pinfo & INSN_UNCOND_BRANCH_DELAY) != 0 |
| 2357 | || (op->pinfo2 & INSN2_UNCOND_BRANCH) != 0) |
| 2358 | { |
| 2359 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 2360 | info->insn_type = dis_jsr; |
| 2361 | else |
| 2362 | info->insn_type = dis_branch; |
| 2363 | } |
| 2364 | else if ((op->pinfo2 & INSN2_COND_BRANCH) != 0) |
| 2365 | info->insn_type = dis_condbranch; |
| 2366 | |
| 2367 | return match == MATCH_FULL ? 4 : 2; |
| 2368 | } |
| 2369 | } |
| 2370 | #undef GET_OP |
| 2371 | |
| 2372 | infprintf (is, "0x%x", first); |
| 2373 | info->insn_type = dis_noninsn; |
| 2374 | |
| 2375 | return 2; |
| 2376 | } |
| 2377 | |
| 2378 | /* Disassemble microMIPS instructions. */ |
| 2379 | |
| 2380 | static int |
| 2381 | print_insn_micromips (bfd_vma memaddr, struct disassemble_info *info) |
| 2382 | { |
| 2383 | const fprintf_ftype infprintf = info->fprintf_func; |
| 2384 | const struct mips_opcode *op, *opend; |
| 2385 | void *is = info->stream; |
| 2386 | bfd_byte buffer[2]; |
| 2387 | unsigned int higher; |
| 2388 | unsigned int length; |
| 2389 | int status; |
| 2390 | unsigned int insn; |
| 2391 | |
| 2392 | info->bytes_per_chunk = 2; |
| 2393 | info->display_endian = info->endian; |
| 2394 | info->insn_info_valid = 1; |
| 2395 | info->branch_delay_insns = 0; |
| 2396 | info->data_size = 0; |
| 2397 | info->insn_type = dis_nonbranch; |
| 2398 | info->target = 0; |
| 2399 | info->target2 = 0; |
| 2400 | |
| 2401 | status = (*info->read_memory_func) (memaddr, buffer, 2, info); |
| 2402 | if (status != 0) |
| 2403 | { |
| 2404 | (*info->memory_error_func) (status, memaddr, info); |
| 2405 | return -1; |
| 2406 | } |
| 2407 | |
| 2408 | length = 2; |
| 2409 | |
| 2410 | if (info->endian == BFD_ENDIAN_BIG) |
| 2411 | insn = bfd_getb16 (buffer); |
| 2412 | else |
| 2413 | insn = bfd_getl16 (buffer); |
| 2414 | |
| 2415 | if ((insn & 0x1c00) == 0x0000 || (insn & 0x1000) == 0x1000) |
| 2416 | { |
| 2417 | /* This is a 32-bit microMIPS instruction. */ |
| 2418 | higher = insn; |
| 2419 | |
| 2420 | status = (*info->read_memory_func) (memaddr + 2, buffer, 2, info); |
| 2421 | if (status != 0) |
| 2422 | { |
| 2423 | infprintf (is, "micromips 0x%x", higher); |
| 2424 | (*info->memory_error_func) (status, memaddr + 2, info); |
| 2425 | return -1; |
| 2426 | } |
| 2427 | |
| 2428 | if (info->endian == BFD_ENDIAN_BIG) |
| 2429 | insn = bfd_getb16 (buffer); |
| 2430 | else |
| 2431 | insn = bfd_getl16 (buffer); |
| 2432 | |
| 2433 | insn = insn | (higher << 16); |
| 2434 | |
| 2435 | length += 2; |
| 2436 | } |
| 2437 | |
| 2438 | /* FIXME: Should probably use a hash table on the major opcode here. */ |
| 2439 | |
| 2440 | opend = micromips_opcodes + bfd_micromips_num_opcodes; |
| 2441 | for (op = micromips_opcodes; op < opend; op++) |
| 2442 | { |
| 2443 | if (op->pinfo != INSN_MACRO |
| 2444 | && !(no_aliases && (op->pinfo2 & INSN2_ALIAS)) |
| 2445 | && (insn & op->mask) == op->match |
| 2446 | && ((length == 2 && (op->mask & 0xffff0000) == 0) |
| 2447 | || (length == 4 && (op->mask & 0xffff0000) != 0))) |
| 2448 | { |
| 2449 | if (!validate_insn_args (op, decode_micromips_operand, insn)) |
| 2450 | continue; |
| 2451 | |
| 2452 | infprintf (is, "%s", op->name); |
| 2453 | |
| 2454 | if (op->args[0]) |
| 2455 | { |
| 2456 | infprintf (is, "\t"); |
| 2457 | print_insn_args (info, op, decode_micromips_operand, insn, |
| 2458 | memaddr + 1, length); |
| 2459 | } |
| 2460 | |
| 2461 | /* Figure out instruction type and branch delay information. */ |
| 2462 | if ((op->pinfo |
| 2463 | & (INSN_UNCOND_BRANCH_DELAY | INSN_COND_BRANCH_DELAY)) != 0) |
| 2464 | info->branch_delay_insns = 1; |
| 2465 | if (((op->pinfo & INSN_UNCOND_BRANCH_DELAY) |
| 2466 | | (op->pinfo2 & INSN2_UNCOND_BRANCH)) != 0) |
| 2467 | { |
| 2468 | if ((op->pinfo & (INSN_WRITE_GPR_31 | INSN_WRITE_1)) != 0) |
| 2469 | info->insn_type = dis_jsr; |
| 2470 | else |
| 2471 | info->insn_type = dis_branch; |
| 2472 | } |
| 2473 | else if (((op->pinfo & INSN_COND_BRANCH_DELAY) |
| 2474 | | (op->pinfo2 & INSN2_COND_BRANCH)) != 0) |
| 2475 | { |
| 2476 | if ((op->pinfo & INSN_WRITE_GPR_31) != 0) |
| 2477 | info->insn_type = dis_condjsr; |
| 2478 | else |
| 2479 | info->insn_type = dis_condbranch; |
| 2480 | } |
| 2481 | else if ((op->pinfo |
| 2482 | & (INSN_STORE_MEMORY | INSN_LOAD_MEMORY)) != 0) |
| 2483 | info->insn_type = dis_dref; |
| 2484 | |
| 2485 | return length; |
| 2486 | } |
| 2487 | } |
| 2488 | |
| 2489 | infprintf (is, "0x%x", insn); |
| 2490 | info->insn_type = dis_noninsn; |
| 2491 | |
| 2492 | return length; |
| 2493 | } |
| 2494 | |
| 2495 | /* Return 1 if a symbol associated with the location being disassembled |
| 2496 | indicates a compressed mode, either MIPS16 or microMIPS, according to |
| 2497 | MICROMIPS_P. We iterate over all the symbols at the address being |
| 2498 | considered assuming if at least one of them indicates code compression, |
| 2499 | then such code has been genuinely produced here (other symbols could |
| 2500 | have been derived from function symbols defined elsewhere or could |
| 2501 | define data). Otherwise, return 0. */ |
| 2502 | |
| 2503 | static bfd_boolean |
| 2504 | is_compressed_mode_p (struct disassemble_info *info, bfd_boolean micromips_p) |
| 2505 | { |
| 2506 | int i; |
| 2507 | int l; |
| 2508 | |
| 2509 | for (i = info->symtab_pos, l = i + info->num_symbols; i < l; i++) |
| 2510 | if (((info->symtab[i])->flags & BSF_SYNTHETIC) != 0 |
| 2511 | && ((!micromips_p |
| 2512 | && ELF_ST_IS_MIPS16 ((*info->symbols)->udata.i)) |
| 2513 | || (micromips_p |
| 2514 | && ELF_ST_IS_MICROMIPS ((*info->symbols)->udata.i)))) |
| 2515 | return 1; |
| 2516 | else if (bfd_asymbol_flavour (info->symtab[i]) == bfd_target_elf_flavour |
| 2517 | && info->symtab[i]->section == info->section) |
| 2518 | { |
| 2519 | elf_symbol_type *symbol = (elf_symbol_type *) info->symtab[i]; |
| 2520 | if ((!micromips_p |
| 2521 | && ELF_ST_IS_MIPS16 (symbol->internal_elf_sym.st_other)) |
| 2522 | || (micromips_p |
| 2523 | && ELF_ST_IS_MICROMIPS (symbol->internal_elf_sym.st_other))) |
| 2524 | return 1; |
| 2525 | } |
| 2526 | |
| 2527 | return 0; |
| 2528 | } |
| 2529 | |
| 2530 | /* In an environment where we do not know the symbol type of the |
| 2531 | instruction we are forced to assume that the low order bit of the |
| 2532 | instructions' address may mark it as a mips16 instruction. If we |
| 2533 | are single stepping, or the pc is within the disassembled function, |
| 2534 | this works. Otherwise, we need a clue. Sometimes. */ |
| 2535 | |
| 2536 | static int |
| 2537 | _print_insn_mips (bfd_vma memaddr, |
| 2538 | struct disassemble_info *info, |
| 2539 | enum bfd_endian endianness) |
| 2540 | { |
| 2541 | bfd_byte buffer[INSNLEN]; |
| 2542 | int status; |
| 2543 | |
| 2544 | set_default_mips_dis_options (info); |
| 2545 | parse_mips_dis_options (info->disassembler_options); |
| 2546 | |
| 2547 | if (info->mach == bfd_mach_mips16) |
| 2548 | return print_insn_mips16 (memaddr, info); |
| 2549 | if (info->mach == bfd_mach_mips_micromips) |
| 2550 | return print_insn_micromips (memaddr, info); |
| 2551 | |
| 2552 | #if 1 |
| 2553 | /* FIXME: If odd address, this is CLEARLY a compressed instruction. */ |
| 2554 | /* Only a few tools will work this way. */ |
| 2555 | if (memaddr & 0x01) |
| 2556 | { |
| 2557 | if (micromips_ase) |
| 2558 | return print_insn_micromips (memaddr, info); |
| 2559 | else |
| 2560 | return print_insn_mips16 (memaddr, info); |
| 2561 | } |
| 2562 | #endif |
| 2563 | |
| 2564 | #if SYMTAB_AVAILABLE |
| 2565 | if (is_compressed_mode_p (info, TRUE)) |
| 2566 | return print_insn_micromips (memaddr, info); |
| 2567 | if (is_compressed_mode_p (info, FALSE)) |
| 2568 | return print_insn_mips16 (memaddr, info); |
| 2569 | #endif |
| 2570 | |
| 2571 | status = (*info->read_memory_func) (memaddr, buffer, INSNLEN, info); |
| 2572 | if (status == 0) |
| 2573 | { |
| 2574 | int insn; |
| 2575 | |
| 2576 | if (endianness == BFD_ENDIAN_BIG) |
| 2577 | insn = bfd_getb32 (buffer); |
| 2578 | else |
| 2579 | insn = bfd_getl32 (buffer); |
| 2580 | |
| 2581 | return print_insn_mips (memaddr, insn, info); |
| 2582 | } |
| 2583 | else |
| 2584 | { |
| 2585 | (*info->memory_error_func) (status, memaddr, info); |
| 2586 | return -1; |
| 2587 | } |
| 2588 | } |
| 2589 | |
| 2590 | int |
| 2591 | print_insn_big_mips (bfd_vma memaddr, struct disassemble_info *info) |
| 2592 | { |
| 2593 | return _print_insn_mips (memaddr, info, BFD_ENDIAN_BIG); |
| 2594 | } |
| 2595 | |
| 2596 | int |
| 2597 | print_insn_little_mips (bfd_vma memaddr, struct disassemble_info *info) |
| 2598 | { |
| 2599 | return _print_insn_mips (memaddr, info, BFD_ENDIAN_LITTLE); |
| 2600 | } |
| 2601 | \f |
| 2602 | /* Indices into option argument vector for options accepting an argument. |
| 2603 | Use MIPS_OPTION_ARG_NONE for options accepting no argument. */ |
| 2604 | typedef enum |
| 2605 | { |
| 2606 | MIPS_OPTION_ARG_NONE = -1, |
| 2607 | MIPS_OPTION_ARG_ABI, |
| 2608 | MIPS_OPTION_ARG_ARCH, |
| 2609 | MIPS_OPTION_ARG_SIZE |
| 2610 | } mips_option_arg_t; |
| 2611 | |
| 2612 | /* Valid MIPS disassembler options. */ |
| 2613 | static struct |
| 2614 | { |
| 2615 | const char *name; |
| 2616 | const char *description; |
| 2617 | mips_option_arg_t arg; |
| 2618 | } mips_options[] = |
| 2619 | { |
| 2620 | { "no-aliases", N_("Use canonical instruction forms.\n"), |
| 2621 | MIPS_OPTION_ARG_NONE }, |
| 2622 | { "msa", N_("Recognize MSA instructions.\n"), |
| 2623 | MIPS_OPTION_ARG_NONE }, |
| 2624 | { "virt", N_("Recognize the virtualization ASE instructions.\n"), |
| 2625 | MIPS_OPTION_ARG_NONE }, |
| 2626 | { "xpa", N_("Recognize the eXtended Physical Address (XPA) ASE\n\ |
| 2627 | instructions.\n"), |
| 2628 | MIPS_OPTION_ARG_NONE }, |
| 2629 | { "ginv", N_("Recognize the Global INValidate (GINV) ASE " |
| 2630 | "instructions.\n"), |
| 2631 | MIPS_OPTION_ARG_NONE }, |
| 2632 | { "loongson-mmi", |
| 2633 | N_("Recognize the Loongson MultiMedia extensions " |
| 2634 | "Instructions (MMI) ASE instructions.\n"), |
| 2635 | MIPS_OPTION_ARG_NONE }, |
| 2636 | { "loongson-cam", |
| 2637 | N_("Recognize the Loongson Content Address Memory (CAM) " |
| 2638 | " instructions.\n"), |
| 2639 | MIPS_OPTION_ARG_NONE }, |
| 2640 | { "loongson-ext", |
| 2641 | N_("Recognize the Loongson EXTensions (EXT) " |
| 2642 | " instructions.\n"), |
| 2643 | MIPS_OPTION_ARG_NONE }, |
| 2644 | { "loongson-ext2", |
| 2645 | N_("Recognize the Loongson EXTensions R2 (EXT2) " |
| 2646 | " instructions.\n"), |
| 2647 | MIPS_OPTION_ARG_NONE }, |
| 2648 | { "gpr-names=", N_("Print GPR names according to specified ABI.\n\ |
| 2649 | Default: based on binary being disassembled.\n"), |
| 2650 | MIPS_OPTION_ARG_ABI }, |
| 2651 | { "fpr-names=", N_("Print FPR names according to specified ABI.\n\ |
| 2652 | Default: numeric.\n"), |
| 2653 | MIPS_OPTION_ARG_ABI }, |
| 2654 | { "cp0-names=", N_("Print CP0 register names according to specified " |
| 2655 | "architecture.\n\ |
| 2656 | Default: based on binary being disassembled.\n"), |
| 2657 | MIPS_OPTION_ARG_ARCH }, |
| 2658 | { "hwr-names=", N_("Print HWR names according to specified architecture.\n\ |
| 2659 | Default: based on binary being disassembled.\n"), |
| 2660 | MIPS_OPTION_ARG_ARCH }, |
| 2661 | { "reg-names=", N_("Print GPR and FPR names according to specified ABI.\n"), |
| 2662 | MIPS_OPTION_ARG_ABI }, |
| 2663 | { "reg-names=", N_("Print CP0 register and HWR names according to " |
| 2664 | "specified\n\ |
| 2665 | architecture."), |
| 2666 | MIPS_OPTION_ARG_ARCH } |
| 2667 | }; |
| 2668 | |
| 2669 | /* Build the structure representing valid MIPS disassembler options. |
| 2670 | This is done dynamically for maintenance ease purpose; a static |
| 2671 | initializer would be unreadable. */ |
| 2672 | |
| 2673 | const disasm_options_and_args_t * |
| 2674 | disassembler_options_mips (void) |
| 2675 | { |
| 2676 | static disasm_options_and_args_t *opts_and_args; |
| 2677 | |
| 2678 | if (opts_and_args == NULL) |
| 2679 | { |
| 2680 | size_t num_options = ARRAY_SIZE (mips_options); |
| 2681 | size_t num_args = MIPS_OPTION_ARG_SIZE; |
| 2682 | disasm_option_arg_t *args; |
| 2683 | disasm_options_t *opts; |
| 2684 | size_t i; |
| 2685 | size_t j; |
| 2686 | |
| 2687 | args = XNEWVEC (disasm_option_arg_t, num_args + 1); |
| 2688 | |
| 2689 | args[MIPS_OPTION_ARG_ABI].name = "ABI"; |
| 2690 | args[MIPS_OPTION_ARG_ABI].values |
| 2691 | = XNEWVEC (const char *, ARRAY_SIZE (mips_abi_choices) + 1); |
| 2692 | for (i = 0; i < ARRAY_SIZE (mips_abi_choices); i++) |
| 2693 | args[MIPS_OPTION_ARG_ABI].values[i] = mips_abi_choices[i].name; |
| 2694 | /* The array we return must be NULL terminated. */ |
| 2695 | args[MIPS_OPTION_ARG_ABI].values[i] = NULL; |
| 2696 | |
| 2697 | args[MIPS_OPTION_ARG_ARCH].name = "ARCH"; |
| 2698 | args[MIPS_OPTION_ARG_ARCH].values |
| 2699 | = XNEWVEC (const char *, ARRAY_SIZE (mips_arch_choices) + 1); |
| 2700 | for (i = 0, j = 0; i < ARRAY_SIZE (mips_arch_choices); i++) |
| 2701 | if (*mips_arch_choices[i].name != '\0') |
| 2702 | args[MIPS_OPTION_ARG_ARCH].values[j++] = mips_arch_choices[i].name; |
| 2703 | /* The array we return must be NULL terminated. */ |
| 2704 | args[MIPS_OPTION_ARG_ARCH].values[j] = NULL; |
| 2705 | |
| 2706 | /* The array we return must be NULL terminated. */ |
| 2707 | args[MIPS_OPTION_ARG_SIZE].name = NULL; |
| 2708 | args[MIPS_OPTION_ARG_SIZE].values = NULL; |
| 2709 | |
| 2710 | opts_and_args = XNEW (disasm_options_and_args_t); |
| 2711 | opts_and_args->args = args; |
| 2712 | |
| 2713 | opts = &opts_and_args->options; |
| 2714 | opts->name = XNEWVEC (const char *, num_options + 1); |
| 2715 | opts->description = XNEWVEC (const char *, num_options + 1); |
| 2716 | opts->arg = XNEWVEC (const disasm_option_arg_t *, num_options + 1); |
| 2717 | for (i = 0; i < num_options; i++) |
| 2718 | { |
| 2719 | opts->name[i] = mips_options[i].name; |
| 2720 | opts->description[i] = _(mips_options[i].description); |
| 2721 | if (mips_options[i].arg != MIPS_OPTION_ARG_NONE) |
| 2722 | opts->arg[i] = &args[mips_options[i].arg]; |
| 2723 | else |
| 2724 | opts->arg[i] = NULL; |
| 2725 | } |
| 2726 | /* The array we return must be NULL terminated. */ |
| 2727 | opts->name[i] = NULL; |
| 2728 | opts->description[i] = NULL; |
| 2729 | opts->arg[i] = NULL; |
| 2730 | } |
| 2731 | |
| 2732 | return opts_and_args; |
| 2733 | } |
| 2734 | |
| 2735 | void |
| 2736 | print_mips_disassembler_options (FILE *stream) |
| 2737 | { |
| 2738 | const disasm_options_and_args_t *opts_and_args; |
| 2739 | const disasm_option_arg_t *args; |
| 2740 | const disasm_options_t *opts; |
| 2741 | size_t max_len = 0; |
| 2742 | size_t i; |
| 2743 | size_t j; |
| 2744 | |
| 2745 | opts_and_args = disassembler_options_mips (); |
| 2746 | opts = &opts_and_args->options; |
| 2747 | args = opts_and_args->args; |
| 2748 | |
| 2749 | fprintf (stream, _("\n\ |
| 2750 | The following MIPS specific disassembler options are supported for use\n\ |
| 2751 | with the -M switch (multiple options should be separated by commas):\n\n")); |
| 2752 | |
| 2753 | /* Compute the length of the longest option name. */ |
| 2754 | for (i = 0; opts->name[i] != NULL; i++) |
| 2755 | { |
| 2756 | size_t len = strlen (opts->name[i]); |
| 2757 | |
| 2758 | if (opts->arg[i] != NULL) |
| 2759 | len += strlen (opts->arg[i]->name); |
| 2760 | if (max_len < len) |
| 2761 | max_len = len; |
| 2762 | } |
| 2763 | |
| 2764 | for (i = 0, max_len++; opts->name[i] != NULL; i++) |
| 2765 | { |
| 2766 | fprintf (stream, " %s", opts->name[i]); |
| 2767 | if (opts->arg[i] != NULL) |
| 2768 | fprintf (stream, "%s", opts->arg[i]->name); |
| 2769 | if (opts->description[i] != NULL) |
| 2770 | { |
| 2771 | size_t len = strlen (opts->name[i]); |
| 2772 | |
| 2773 | if (opts->arg[i] != NULL) |
| 2774 | len += strlen (opts->arg[i]->name); |
| 2775 | fprintf (stream, |
| 2776 | "%*c %s", (int) (max_len - len), ' ', opts->description[i]); |
| 2777 | } |
| 2778 | fprintf (stream, _("\n")); |
| 2779 | } |
| 2780 | |
| 2781 | for (i = 0; args[i].name != NULL; i++) |
| 2782 | { |
| 2783 | fprintf (stream, _("\n\ |
| 2784 | For the options above, the following values are supported for \"%s\":\n "), |
| 2785 | args[i].name); |
| 2786 | for (j = 0; args[i].values[j] != NULL; j++) |
| 2787 | fprintf (stream, " %s", args[i].values[j]); |
| 2788 | fprintf (stream, _("\n")); |
| 2789 | } |
| 2790 | |
| 2791 | fprintf (stream, _("\n")); |
| 2792 | } |