[deliverable/linux.git] / tools / build / Makefile.feature

feature_dir := $(srctree)/tools/build/feature

ifneq ($(OUTPUT),)
  OUTPUT_FEATURES = $(OUTPUT)feature/
  $(shell mkdir -p $(OUTPUT_FEATURES))
endif

feature_check = $(eval $(feature_check_code))
define feature_check_code
  feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
endef

feature_set = $(eval $(feature_set_code))
define feature_set_code
  feature-$(1) := 1
endef

#
# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
#

#
# Note that this is not a complete list of all feature tests, just
# those that are typically built on a fully configured system.
#
# [ Feature tests not mentioned here have to be built explicitly in
#   the rule that uses them - an example for that is the 'bionic'
#   feature check. ]
#
FEATURE_TESTS_BASIC :=			\
	backtrace			\
	dwarf				\
	dwarf_getlocations		\
	fortify-source			\
	sync-compare-and-swap		\
	glibc				\
	gtk2				\
	gtk2-infobar			\
	libaudit			\
	libbfd				\
	libelf				\
	libelf-getphdrnum		\
	libelf-mmap			\
	libnuma				\
	numa_num_possible_cpus		\
	libperl				\
	libpython			\
	libpython-version		\
	libslang			\
	libcrypto			\
	libunwind			\
	libunwind-x86			\
	libunwind-x86_64		\
	libunwind-arm			\
	libunwind-aarch64		\
	pthread-attr-setaffinity-np	\
	stackprotector-all		\
	timerfd				\
	libdw-dwarf-unwind		\
	zlib				\
	lzma				\
	get_cpuid			\
	bpf

# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
# of all feature tests
FEATURE_TESTS_EXTRA :=			\
	bionic				\
	compile-32			\
	compile-x32			\
	cplus-demangle			\
	hello				\
	libbabeltrace			\
	liberty				\
	liberty-z			\
	libunwind-debug-frame		\
	libunwind-debug-frame-arm	\
	libunwind-debug-frame-aarch64

FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)

ifeq ($(FEATURE_TESTS),all)
  FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
endif

FEATURE_DISPLAY ?=			\
	dwarf				\
	dwarf_getlocations		\
	glibc				\
	gtk2				\
	libaudit			\
	libbfd				\
	libelf				\
	libnuma				\
	numa_num_possible_cpus		\
	libperl				\
	libpython			\
	libslang			\
	libcrypto			\
	libunwind			\
	libdw-dwarf-unwind		\
	zlib				\
	lzma				\
	get_cpuid			\
	bpf

# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
# mentioned in this list we need to refactor this ;-).
set_test_all_flags = $(eval $(set_test_all_flags_code))
define set_test_all_flags_code
  FEATURE_CHECK_CFLAGS-all  += $(FEATURE_CHECK_CFLAGS-$(1))
  FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
endef

$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))

#
# Special fast-path for the 'all features are available' case:
#
$(call feature_check,all,$(MSG))

#
# Just in case the build freshly failed, make sure we print the
# feature matrix:
#
ifeq ($(feature-all), 1)
  #
  # test-all.c passed - just set all the core feature flags to 1:
  #
  $(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
  #
  # test-all.c does not comprise these tests, so we need to
  # for this case to get features proper values
  #
  $(call feature_check,compile-32)
  $(call feature_check,compile-x32)
  $(call feature_check,bionic)
  $(call feature_check,libbabeltrace)
else
  $(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
endif

#
# Print the result of the feature test:
#
feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG))

define feature_print_status_code
  ifeq ($(feature-$(1)), 1)
    MSG = $(shell printf '...%30s: [ \033[32mon\033[m  ]' $(1))
  else
    MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
  endif
endef

feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG))
define feature_print_text_code
    MSG = $(shell printf '...%30s: %s' $(1) $(2))
endef

#
# generates feature value assignment for name, like:
#   $(call feature_assign,dwarf) == feature-dwarf=1
#
feature_assign = feature-$(1)=$(feature-$(1))

FEATURE_DUMP_FILENAME = $(OUTPUT)FEATURE-DUMP$(FEATURE_USER)
FEATURE_DUMP := $(shell touch $(FEATURE_DUMP_FILENAME); cat $(FEATURE_DUMP_FILENAME))

feature_dump_check = $(eval $(feature_dump_check_code))
define feature_dump_check_code
  ifeq ($(findstring $(1),$(FEATURE_DUMP)),)
    $(2) := 1
  endif
endef

#
# First check if any test from FEATURE_DISPLAY
# and set feature_display := 1 if it does
$(foreach feat,$(FEATURE_DISPLAY),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_display))

#
# Now also check if any other test changed,
# so we force FEATURE-DUMP generation
$(foreach feat,$(FEATURE_TESTS),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_dump_changed))

# The $(feature_display) controls the default detection message
# output. It's set if:
# - detected features differes from stored features from
#   last build (in $(FEATURE_DUMP_FILENAME) file)
# - one of the $(FEATURE_DISPLAY) is not detected
# - VF is enabled

ifeq ($(feature_dump_changed),1)
  $(shell rm -f $(FEATURE_DUMP_FILENAME))
  $(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
endif

feature_display_check = $(eval $(feature_check_display_code))
define feature_check_display_code
  ifneq ($(feature-$(1)), 1)
    feature_display := 1
  endif
endef

$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))

ifeq ($(VF),1)
  feature_display := 1
  feature_verbose := 1
endif

ifeq ($(feature_display),1)
  $(info )
  $(info Auto-detecting system features:)
  $(foreach feat,$(FEATURE_DISPLAY),$(call feature_print_status,$(feat),))
  ifneq ($(feature_verbose),1)
    $(info )
  endif
endif

ifeq ($(feature_verbose),1)
  TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))
  $(foreach feat,$(TMP),$(call feature_print_status,$(feat),))
  $(info )
endif
Commit	Line	Data
	1	feature_dir := $(srctree)/tools/build/feature
	2
	3	ifneq ($(OUTPUT),)
	4	OUTPUT_FEATURES = $(OUTPUT)feature/
	5	$(shell mkdir -p $(OUTPUT_FEATURES))
	6	endif
	7
	8	feature_check = $(eval $(feature_check_code))
	9	define feature_check_code
	10	feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 \|\| echo 0)
	11	endef
	12
	13	feature_set = $(eval $(feature_set_code))
	14	define feature_set_code
	15	feature-$(1) := 1
	16	endef
	17
	18	#
	19	# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
	20	#
	21
	22	#
	23	# Note that this is not a complete list of all feature tests, just
	24	# those that are typically built on a fully configured system.
	25	#
	26	# [ Feature tests not mentioned here have to be built explicitly in
	27	# the rule that uses them - an example for that is the 'bionic'
	28	# feature check. ]
	29	#
	30	FEATURE_TESTS_BASIC := \
	31	backtrace \
	32	dwarf \
	33	dwarf_getlocations \
	34	fortify-source \
	35	sync-compare-and-swap \
	36	glibc \
	37	gtk2 \
	38	gtk2-infobar \
	39	libaudit \
	40	libbfd \
	41	libelf \
	42	libelf-getphdrnum \
	43	libelf-mmap \
	44	libnuma \
	45	numa_num_possible_cpus \
	46	libperl \
	47	libpython \
	48	libpython-version \
	49	libslang \
	50	libcrypto \
	51	libunwind \
	52	libunwind-x86 \
	53	libunwind-x86_64 \
	54	libunwind-arm \
	55	libunwind-aarch64 \
	56	pthread-attr-setaffinity-np \
	57	stackprotector-all \
	58	timerfd \
	59	libdw-dwarf-unwind \
	60	zlib \
	61	lzma \
	62	get_cpuid \
	63	bpf
	64
	65	# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
	66	# of all feature tests
	67	FEATURE_TESTS_EXTRA := \
	68	bionic \
	69	compile-32 \
	70	compile-x32 \
	71	cplus-demangle \
	72	hello \
	73	libbabeltrace \
	74	liberty \
	75	liberty-z \
	76	libunwind-debug-frame \
	77	libunwind-debug-frame-arm \
	78	libunwind-debug-frame-aarch64
	79
	80	FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
	81
	82	ifeq ($(FEATURE_TESTS),all)
	83	FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
	84	endif
	85
	86	FEATURE_DISPLAY ?= \
	87	dwarf \
	88	dwarf_getlocations \
	89	glibc \
	90	gtk2 \
	91	libaudit \
	92	libbfd \
	93	libelf \
	94	libnuma \
	95	numa_num_possible_cpus \
	96	libperl \
	97	libpython \
	98	libslang \
	99	libcrypto \
	100	libunwind \
	101	libdw-dwarf-unwind \
	102	zlib \
	103	lzma \
	104	get_cpuid \
	105	bpf
	106
	107	# Set FEATURE_CHECK_(C\|LD)FLAGS-all for all FEATURE_TESTS features.
	108	# If in the future we need per-feature checks/flags for features not
	109	# mentioned in this list we need to refactor this ;-).
	110	set_test_all_flags = $(eval $(set_test_all_flags_code))
	111	define set_test_all_flags_code
	112	FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1))
	113	FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
	114	endef
	115
	116	$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
	117
	118	#
	119	# Special fast-path for the 'all features are available' case:
	120	#
	121	$(call feature_check,all,$(MSG))
	122
	123	#
	124	# Just in case the build freshly failed, make sure we print the
	125	# feature matrix:
	126	#
	127	ifeq ($(feature-all), 1)
	128	#
	129	# test-all.c passed - just set all the core feature flags to 1:
	130	#
	131	$(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
	132	#
	133	# test-all.c does not comprise these tests, so we need to
	134	# for this case to get features proper values
	135	#
	136	$(call feature_check,compile-32)
	137	$(call feature_check,compile-x32)
	138	$(call feature_check,bionic)
	139	$(call feature_check,libbabeltrace)
	140	else
	141	$(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
	142	endif
	143
	144	#
	145	# Print the result of the feature test:
	146	#
	147	feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG))
	148
	149	define feature_print_status_code
	150	ifeq ($(feature-$(1)), 1)
	151	MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
	152	else
	153	MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
	154	endif
	155	endef
	156
	157	feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG))
	158	define feature_print_text_code
	159	MSG = $(shell printf '...%30s: %s' $(1) $(2))
	160	endef
	161
	162	#
	163	# generates feature value assignment for name, like:
	164	# $(call feature_assign,dwarf) == feature-dwarf=1
	165	#
	166	feature_assign = feature-$(1)=$(feature-$(1))
	167
	168	FEATURE_DUMP_FILENAME = $(OUTPUT)FEATURE-DUMP$(FEATURE_USER)
	169	FEATURE_DUMP := $(shell touch $(FEATURE_DUMP_FILENAME); cat $(FEATURE_DUMP_FILENAME))
	170
	171	feature_dump_check = $(eval $(feature_dump_check_code))
	172	define feature_dump_check_code
	173	ifeq ($(findstring $(1),$(FEATURE_DUMP)),)
	174	$(2) := 1
	175	endif
	176	endef
	177
	178	#
	179	# First check if any test from FEATURE_DISPLAY
	180	# and set feature_display := 1 if it does
	181	$(foreach feat,$(FEATURE_DISPLAY),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_display))
	182
	183	#
	184	# Now also check if any other test changed,
	185	# so we force FEATURE-DUMP generation
	186	$(foreach feat,$(FEATURE_TESTS),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_dump_changed))
	187
	188	# The $(feature_display) controls the default detection message
	189	# output. It's set if:
	190	# - detected features differes from stored features from
	191	# last build (in $(FEATURE_DUMP_FILENAME) file)
	192	# - one of the $(FEATURE_DISPLAY) is not detected
	193	# - VF is enabled
	194
	195	ifeq ($(feature_dump_changed),1)
	196	$(shell rm -f $(FEATURE_DUMP_FILENAME))
	197	$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
	198	endif
	199
	200	feature_display_check = $(eval $(feature_check_display_code))
	201	define feature_check_display_code
	202	ifneq ($(feature-$(1)), 1)
	203	feature_display := 1
	204	endif
	205	endef
	206
	207	$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))
	208
	209	ifeq ($(VF),1)
	210	feature_display := 1
	211	feature_verbose := 1
	212	endif
	213
	214	ifeq ($(feature_display),1)
	215	$(info )
	216	$(info Auto-detecting system features:)
	217	$(foreach feat,$(FEATURE_DISPLAY),$(call feature_print_status,$(feat),))
	218	ifneq ($(feature_verbose),1)
	219	$(info )
	220	endif
	221	endif
	222
	223	ifeq ($(feature_verbose),1)
	224	TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))
	225	$(foreach feat,$(TMP),$(call feature_print_status,$(feat),))
	226	$(info )
	227	endif