Documentation/devicetree/bindings/eeprom/eeprom.txt

   1 EEPROMs (I2C)
   2
   3 Required properties:
   4
   5   - compatible : should be "<manufacturer>,<type>", like these:
   6
   7         "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
   8         "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
   9         "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
  10
  11         "catalyst,24c32"
  12
  13         "ramtron,24c64"
  14
  15         "renesas,r1ex24002"
  16
  17          If there is no specific driver for <manufacturer>, a generic
  18          driver based on <type> is selected. Possible types are:
  19          "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
  20          "24c128", "24c256", "24c512", "24c1024", "spd"
  21
  22   - reg : the I2C address of the EEPROM
  23
  24 Optional properties:
  25
  26   - pagesize : the length of the pagesize for writing. Please consult the
  27                manual of your device, that value varies a lot. A wrong value
  28                may result in data loss! If not specified, a safety value of
  29                '1' is used which will be very slow.
  30
  31   - read-only: this parameterless property disables writes to the eeprom
  32
  33 Example:
  34
  35 eeprom@52 {
  36         compatible = "atmel,24c32";
  37         reg = <0x52>;
  38         pagesize = <32>;
  39 };