Input: altera_ps2 - switch to using managed resources
[deliverable/linux.git] / Documentation / devicetree / bindings / input / cap1106.txt
1 Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
2
3 The node for this driver must be a child of a I2C controller node, as the
4 device communication via I2C only.
5
6 Required properties:
7
8 compatible: Must be "microchip,cap1106"
9
10 reg: The I2C slave address of the device.
11 Only 0x28 is valid.
12
13 interrupts: Property describing the interrupt line the
14 device's ALERT#/CM_IRQ# pin is connected to.
15 The device only has one interrupt source.
16
17 Optional properties:
18
19 autorepeat: Enables the Linux input system's autorepeat
20 feature on the input device.
21
22 microchip,sensor-gain: Defines the gain of the sensor circuitry. This
23 effectively controls the sensitivity, as a
24 smaller delta capacitance is required to
25 generate the same delta count values.
26 Valid values are 1, 2, 4, and 8.
27 By default, a gain of 1 is set.
28
29 linux,keycodes: Specifies an array of numeric keycode values to
30 be used for the channels. If this property is
31 omitted, KEY_A, KEY_B, etc are used as
32 defaults. The array must have exactly six
33 entries.
34
35 Example:
36
37 i2c_controller {
38 cap1106@28 {
39 compatible = "microchip,cap1106";
40 interrupt-parent = <&gpio1>;
41 interrupts = <0 0>;
42 reg = <0x28>;
43 autorepeat;
44 microchip,sensor-gain = <2>;
45
46 linux,keycodes = <103 /* KEY_UP */
47 106 /* KEY_RIGHT */
48 108 /* KEY_DOWN */
49 105 /* KEY_LEFT */
50 109 /* KEY_PAGEDOWN */
51 104>; /* KEY_PAGEUP */
52 };
53 }
This page took 0.03184 seconds and 5 git commands to generate.