Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 exec_prefix = $(prefix)
  25 bindir = $(exec_prefix)/bin
  26 libdir = $(exec_prefix)/lib
  27 tooldir = $(libdir)
  28
  29 program_transform_name =
  30
  31 datadir = $(prefix)/lib
  32 mandir = $(prefix)/man
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = $(prefix)/info
  43 includedir = $(prefix)/include
  44 docdir = $(datadir)/doc
  45
  46 SHELL = /bin/sh
  47
  48 INSTALL = cp
  49 INSTALL_PROGRAM = $(INSTALL)
  50 INSTALL_DATA = $(INSTALL)
  51
  52 AS = as
  53 AR = ar
  54 AR_FLAGS = rc
  55 CC = cc
  56 CFLAGS = -g
  57 # start-sanitize-chill
  58 CHILLFLAGS = $(CFLAGS)
  59 CHILL_LIB = -lchill
  60 # end-sanitize-chill
  61 CXX = gcc
  62 CXXFLAGS = -g -O
  63 RANLIB = ranlib
  64 NM = nm
  65 GZIP = gzip
  66
  67 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
  68 BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
  69             then echo $${rootme}/byacc/byacc ; \
  70             else echo byacc ; \
  71         fi`
  72
  73 LEX = `if [ -f $${rootme}/flex/flex ] ; \
  74         then echo $${rootme}/flex/flex ; \
  75         else echo flex ; fi`
  76
  77 MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
  78         then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
  79         else echo makeinfo ; fi`
  80
  81
  82 # libraries that may need to be augmented on a system-by-system basis
  83 X11_LIB = -lX11
  84
  85 # compilers to use to create programs which must be run in the build
  86 # environment.
  87 CC_FOR_BUILD = $(CC)
  88 CXX_FOR_BUILD = $(CXX)
  89
  90 SUBDIRS = "this is set via configure, don't edit this"
  91 OTHERS =
  92
  93 ALL = all.normal
  94 INSTALL_TARGET = install.all
  95
  96 CC_FOR_TARGET = ` \
  97   if [ -f $${rootme}/gcc/Makefile ] ; then \
  98     echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
  99   else \
 100     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 101       echo $(CC); \
 102     else \
 103       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 104     fi; \
 105   fi`
 106
 107 # start-sanitize-chill
 108 CHILL_FOR_TARGET = ` \
 109   if [ -f $${rootme}/gcc/Makefile ] ; then \
 110     echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
 111   else \
 112     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 113       echo $(CC); \
 114     else \
 115       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 116     fi; \
 117   fi`
 118
 119 # end-sanitize-chill
 120
 121 CXX_FOR_TARGET = ` \
 122   if [ -f $${rootme}/gcc/Makefile ] ; then \
 123     echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
 124   else \
 125     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 126       echo $(CXX); \
 127     else \
 128       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 129     fi; \
 130   fi`
 131
 132 AS_FOR_TARGET = ` \
 133   if [ -f $${rootme}/gas/Makefile ] ; then \
 134     echo $${rootme}/gas/as.new ; \
 135   else \
 136     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 137       echo $(AS); \
 138     else \
 139        t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
 140     fi; \
 141   fi`
 142
 143 AR_FOR_TARGET = ` \
 144   if [ -f $${rootme}/binutils/Makefile ] ; then \
 145     echo $${rootme}/binutils/ar ; \
 146   else \
 147     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 148       echo $(AR); \
 149     else \
 150        t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
 151     fi; \
 152   fi`
 153
 154 RANLIB_FOR_TARGET = ` \
 155   if [ -f $${rootme}/binutils/Makefile ] ; then \
 156     echo $${rootme}/binutils/ranlib ; \
 157   else \
 158     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 159       echo $(RANLIB); \
 160     else \
 161        t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
 162     fi; \
 163   fi`
 164
 165 NM_FOR_TARGET = ` \
 166   if [ -f $${rootme}/binutils/Makefile ] ; then \
 167     echo $${rootme}/binutils/nm ; \
 168   else \
 169     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 170       echo $(NM); \
 171     else \
 172        t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
 173     fi; \
 174   fi`
 175
 176 # FIXME: This is badly named.
 177 XTRAFLAGS = ` \
 178   if [ -f $${rootme}/gcc/Makefile ] ; then \
 179     if [ -f $${rootme}/newlib/Makefile ] ; then \
 180       echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
 181     else \
 182       echo -I$${rootme}/gcc/include ; \
 183     fi ; \
 184   else \
 185      echo ; \
 186   fi`
 187
 188 PRMS = install-prms
 189
 190 #### host and target specific makefile fragments come in here.
 191 ###
 192
 193 # Flags to pass down to all sub-makes.
 194 # Please keep these in alphabetical order.
 195 BASE_FLAGS_TO_PASS = \
 196         "AR_FLAGS=$(AR_FLAGS)" \
 197         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 198         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 199         "BISON=$(BISON)" \
 200         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 201         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 202         "CFLAGS=$(CFLAGS)" \
 203         $(start-sanitize-chill)\
 204         "CHILLFLAGS=$(CHILLFLAGS)" \
 205         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 206         "CHILL_LIB=$(CHILL_LIB)" \
 207         $(end-sanitize-chill)\
 208         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 209         "CXXFLAGS=$(CXXFLAGS)" \
 210         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 211         'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
 212         "INSTALL=$(INSTALL)" \
 213         "INSTALL_DATA=$(INSTALL_DATA)" \
 214         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 215         "LDFLAGS=$(LDFLAGS)" \
 216         "LEX=$(LEX)" \
 217         "LOADLIBES=$(LOADLIBES)" \
 218         "MAKEINFO=$(MAKEINFO)" \
 219         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 220         "PRMS=$(PRMS)" \
 221         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 222         "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
 223         "exec_prefix=$(exec_prefix)" \
 224         "prefix=$(prefix)" \
 225         "tooldir=$(tooldir)"
 226
 227 # Flags to pass down to most sub-makes, in which we're building with
 228 # the host environment.
 229 # If any variables are added here, they must be added to do-*, below.
 230 EXTRA_HOST_FLAGS = \
 231         'AR=$(AR)' \
 232         'AS=$(AS)' \
 233         'CC=$(CC)' \
 234         'CXX=$(CXX)' \
 235         'NM=$(NM)' \
 236         'RANLIB=$(RANLIB)' \
 237         'XTRAFLAGS='
 238
 239 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 240
 241 # Flags that are concerned with the location of the X11 include files
 242 # and library files
 243 X11_FLAGS_TO_PASS = \
 244         "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
 245         "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
 246         "X11_LIB=$(X11_LIB)"
 247
 248 # Flags to pass down to makes which are built with the target environment.
 249 # The double $ decreases the length of the command line; the variables
 250 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 251 # If any variables are added here, they must be added to do-*, below.
 252 EXTRA_TARGET_FLAGS = \
 253         'AR=$$(AR_FOR_TARGET)' \
 254         'AS=$$(AS_FOR_TARGET)' \
 255         'CC=$$(CC_FOR_TARGET)' \
 256         'CXX=$$(CXX_FOR_TARGET)' \
 257         'NM=$$(NM_FOR_TARGET)' \
 258         'RANLIB=$$(RANLIB_FOR_TARGET)' \
 259         'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
 260
 261 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 262
 263 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 264 # unfortunately needs the native compiler and the target ar and
 265 # ranlib.
 266 # If any variables are added here, they must be added to do-*, below.
 267 EXTRA_GCC_FLAGS = \
 268         'AR=$$(AR_FOR_TARGET)' \
 269         'AS=$(AS)' \
 270         'CC=$(CC)' \
 271         'CXX=$(CXX)' \
 272         'NM=$(NM)' \
 273         'RANLIB=$$(RANLIB_FOR_TARGET)' \
 274         'XTRAFLAGS='
 275
 276 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 277
 278 # This is a list of the targets for all the modules which are compiled
 279 # using $(FLAGS_TO_PASS).
 280 ALL_MODULES = \
 281         all-autoconf \
 282         all-bfd \
 283         all-binutils \
 284         all-byacc \
 285         all-cvs \
 286         all-dejagnu \
 287         all-diff \
 288         all-etc \
 289         all-fileutils \
 290         all-find \
 291         all-flex \
 292         all-gas \
 293         all-gawk \
 294         all-gdb \
 295         all-gprof \
 296         all-grep \
 297         all-gzip \
 298         all-hello \
 299         all-indent \
 300         all-ispell \
 301         all-ld \
 302         all-libiberty \
 303         all-m4 \
 304         all-make \
 305         all-mmalloc \
 306         all-opcodes \
 307         all-patch \
 308         all-prms \
 309         all-rcs \
 310         all-readline \
 311         all-recode \
 312         all-sed \
 313         all-send-pr \
 314         all-shellutils \
 315         all-sim \
 316         all-tar \
 317         all-tcl \
 318         all-texinfo \
 319         all-textutils \
 320         all-tgas \
 321         all-time \
 322         all-uudecode \
 323         all-wdiff
 324
 325 # This is a list of the install targets for all the modules which are
 326 # compiled using $(FLAGS_TO_PASS).
 327 INSTALL_MODULES = \
 328         install-autoconf \
 329         install-bfd \
 330         install-binutils \
 331         install-byacc \
 332         install-cvs \
 333         install-dejagnu \
 334         install-diff \
 335         install-etc \
 336         install-fileutils \
 337         install-find \
 338         install-flex \
 339         install-gas \
 340         install-gawk \
 341         install-gdb \
 342         install-glob \
 343         install-gprof \
 344         install-grep \
 345         install-gzip \
 346         install-hello \
 347         install-indent \
 348         install-ispell \
 349         install-ld \
 350         install-libiberty \
 351         install-m4 \
 352         install-make \
 353         install-mmalloc \
 354         install-opcodes \
 355         install-patch \
 356         install-prms \
 357         install-rcs \
 358         install-readline \
 359         install-recode \
 360         install-sed \
 361         install-send-pr \
 362         install-shellutils \
 363         install-sim \
 364         install-tar \
 365         install-tcl \
 366         install-texinfo \
 367         install-textutils \
 368         install-tgas \
 369         install-time \
 370         install-uudecode \
 371         install-wdiff
 372
 373 # This is a list of the targets for all the modules which are compiled
 374 # using $(X11_FLAGS_TO_PASS).
 375 ALL_X11_MODULES = \
 376         all-emacs \
 377         all-expect \
 378         all-tclX \
 379         all-tk
 380
 381 # This is a list of the install targets for all the modules which are
 382 # compiled using $(X11_FLAGS_TO_PASS).
 383 INSTALL_X11_MODULES = \
 384         install-emacs \
 385         install-expect \
 386         install-tclX \
 387         install-tk
 388
 389 # This is a list of the targets for all the modules which are compiled
 390 # using $(TARGET_FLAGS_TO_PASS).
 391 ALL_TARGET_MODULES = \
 392         $(start-sanitize-chill) \
 393         all-chillrt \
 394         $(end-sanitize-chill) \
 395         all-libg++ \
 396         all-newlib \
 397         all-xiberty
 398
 399 # This is a list of the install targets for all the modules which are
 400 # compiled using $(TARGET_FLAGS_TO_PASS).
 401 INSTALL_TARGET_MODULES = \
 402         $(start-sanitize-chill) \
 403         install-chillrt \
 404         $(end-sanitize-chill) \
 405         install-libg++ \
 406         install-newlib \
 407         install-xiberty
 408
 409 # This is a shell case of all modules which are compiled using
 410 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
 411 TARGET_LIBS = libg++ | newlib | xiberty
 412 # start-sanitize-chill
 413 TARGET_LIBS = chillrt | libg++ | newlib | xiberty
 414 # end-sanitize-chill
 415
 416 # The first rule in the file had better be this one.  Don't put any above it.
 417 all: $(ALL)
 418 .PHONY: all
 419
 420 # The target built for a native build.
 421 .PHONY: all.normal
 422 all.normal: \
 423         $(ALL_MODULES) \
 424         $(ALL_TARGET_MODULES) \
 425         $(ALL_X11_MODULES) \
 426         all-gcc
 427
 428 # The target built for a cross build.
 429 .PHONY: all.cross
 430 all.cross: \
 431         all-bfd \
 432         all-binutils \
 433         all-byacc \
 434         all-dejagnu \
 435         all-flex \
 436         all-gas \
 437         all-gcc \
 438         all-gdb \
 439         all-ld \
 440         all-libiberty \
 441         all-mmalloc \
 442         all-opcodes \
 443         all-readline \
 444         all-sim \
 445         $(ALL_TARGET_MODULES)
 446
 447 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 448 # ``make X'' in all subdirectories (because, in general, there is a
 449 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 450 # but it may do additional work as well).
 451 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 452 # because it is so large that it can easily overflow the command line
 453 # length limit on some systems.
 454 DO_X = \
 455         do-check \
 456         do-clean \
 457         do-distclean \
 458         do-dvi \
 459         do-info \
 460         do-install-info \
 461         do-installcheck \
 462         do-mostlyclean \
 463         do-realclean
 464 .PHONY: $(DO_X)
 465 $(DO_X):
 466         @target=`echo $@ | sed -e 's/^do-//'`; \
 467         rootme=`pwd`; export rootme; \
 468         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 469         for i in $(SUBDIRS); do \
 470           if [ -f ./$$i/Makefile ]; then \
 471             case $$i in \
 472             $(TARGET_LIBS) ) \
 473               for flag in $(EXTRA_TARGET_FLAGS); do \
 474                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 475               done; \
 476               ;; \
 477             gcc) \
 478               for flag in $(EXTRA_GCC_FLAGS); do \
 479                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 480               done; \
 481               ;; \
 482             *) \
 483               for flag in $(EXTRA_HOST_FLAGS); do \
 484                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 485               done; \
 486               ;; \
 487             esac ; \
 488             export AR AS CC CXX NM RANLIB XTRAFLAGS; \
 489             if (cd ./$$i; \
 490                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 491                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 492                         "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
 493                         $${target}); \
 494             then true; else exit 1; fi; \
 495           else true; fi; \
 496         done
 497
 498 # Here are the targets which correspond to the do-X targets.
 499
 500 .PHONY: info check installcheck dvi install-info
 501 .PHONY: clean distclean mostlyclean realclean local-clean local-distclean
 502 info: do-info
 503 check: do-check
 504 installcheck: do-installcheck
 505 dvi: do-dvi
 506
 507 install-info: install-info-dirs do-install-info dir.info
 508         if [ -f dir.info ] ; then \
 509           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 510         else true ; fi
 511
 512 do-install-info: install-info-dirs
 513
 514 local-clean:
 515         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 516
 517 local-distclean:
 518         -rm -f Makefile config.status
 519
 520 clean: do-clean local-clean
 521 mostlyclean: do-mostlyclean local-clean
 522 distclean: do-distclean local-clean local-distclean
 523 realclean: do-realclean local-clean local-distclean
 524
 525 # Installation targets.
 526
 527 .PHONY: install uninstall
 528 install: $(INSTALL_TARGET)
 529
 530 uninstall:
 531         @echo "the uninstall target is not supported in this tree"
 532
 533 .PHONY: install.all
 534 install.all: install-no-fixedincludes
 535         @if [ -f ./gcc/Makefile ] ; then \
 536                 rootme=`pwd` ; export rootme ; \
 537                 (cd ./gcc; \
 538                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 539         else \
 540                 true ; \
 541         fi
 542
 543 # install-no-fixedincludes is used because Cygnus can not distributed
 544 # the fixed header files.
 545 .PHONY: install-no-fixedincludes
 546 install-no-fixedincludes: \
 547         install-dirs \
 548         gcc-no-fixedincludes \
 549         $(INSTALL_MODULES) \
 550         $(INSTALL_TARGET_MODULES) \
 551         $(INSTALL_X11_MODULES)
 552
 553 # Install the gcc headers files, but not the fixed include files,
 554 # which Cygnus is not allowed to distribute.  This rule is very
 555 # dependent on the workings of the gcc Makefile.in.
 556 .PHONY: gcc-no-fixedincludes
 557 gcc-no-fixedincludes:
 558         @if [ -f ./gcc/Makefile ]; then \
 559           rm -rf gcc/tmp-include; \
 560           mv gcc/include gcc/tmp-include 2>/dev/null; \
 561           mkdir gcc/include; \
 562           touch gcc/stmp-fixincludes; \
 563           rm -f gcc/stmp-headers; \
 564           rootme=`pwd`; export rootme; \
 565           srcroot=`cd $(srcdir); pwd` ; export srcroot; \
 566           (cd ./gcc; \
 567            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 568           rm -rf gcc/include; \
 569           mv gcc/tmp-include gcc/include 2>/dev/null; \
 570         else true; fi
 571
 572 .PHONY: install.cross
 573 install.cross: \
 574         install-dirs \
 575         install-binutils \
 576         install-byacc \
 577         install-dejagnu \
 578         install-etc \
 579         install-flex \
 580         install-gas \
 581         install-gcc \
 582         install-gdb \
 583         install-glob \
 584         install-ld \
 585         install-libiberty \
 586         install-mmalloc \
 587         install-opcodes \
 588         install-readline \
 589         $(INSTALL_TARGET_MODULES)
 590
 591 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 592 # build a target all-X means to cd to X and make all.
 593 # all-glob is handled specially because it doesn't actually build.
 594 .PHONY: $(ALL_MODULES) all-glob
 595 $(ALL_MODULES) all-glob:
 596         @dir=`echo $@ | sed -e 's/all-//'`; \
 597         if [ -f ./$${dir}/Makefile ] ; then \
 598           rootme=`pwd`; export rootme; \
 599           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 600           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
 601         else \
 602           true; \
 603         fi
 604
 605 # This rule is used to install the modules which use FLAGS_TO_PASS.
 606 # To build a target install-X means to cd to X and make install.
 607 .PHONY: $(INSTALL_MODULES)
 608 $(INSTALL_MODULES): install-dirs
 609         @dir=`echo $@ | sed -e 's/install-//'`; \
 610         if [ -f ./$${dir}/Makefile ] ; then \
 611           rootme=`pwd`; export rootme; \
 612           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 613           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 614         else \
 615           true; \
 616         fi
 617
 618 # This rule is used the build the modules which use
 619 # TARGET_FLAGS_TO_PASS.  To build a target all-X means to cd to X and
 620 # make all.
 621 .PHONY: $(ALL_TARGET_MODULES)
 622 $(ALL_TARGET_MODULES):
 623         @dir=`echo $@ | sed -e 's/all-//'`; \
 624         if [ -f ./$${dir}/Makefile ] ; then \
 625           rootme=`pwd`; export rootme; \
 626           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 627           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
 628         else \
 629           true; \
 630         fi
 631
 632 # This rule is used to install the modules which use
 633 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
 634 # and make install.
 635 .PHONY: $(INSTALL_TARGET_MODULES)
 636 $(INSTALL_TARGET_MODULES): install-dirs
 637         @dir=`echo $@ | sed -e 's/install-//'`; \
 638         if [ -f ./$${dir}/Makefile ] ; then \
 639           rootme=`pwd`; export rootme; \
 640           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 641           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
 642         else \
 643           true; \
 644         fi
 645
 646 # This rule is used the build the modules which use X11_FLAGS_TO_PASS.
 647 # To build a target all-X means to cd to X and make all.
 648 .PHONY: $(ALL_X11_MODULES)
 649 $(ALL_X11_MODULES):
 650         @dir=`echo $@ | sed -e 's/all-//'`; \
 651         if [ -f ./$${dir}/Makefile ] ; then \
 652           rootme=`pwd`; export rootme; \
 653           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 654           (cd $${dir}; \
 655            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
 656         else \
 657           true; \
 658         fi
 659
 660 # This rule is used the install the modules which use X11_FLAGS_TO_PASS.
 661 # To build a target install-X means to cd to X and make install.
 662 .PHONY: $(INSTALL_X11_MODULES)
 663 $(INSTALL_X11_MODULES):
 664         @dir=`echo $@ | sed -e 's/all-//'`; \
 665         if [ -f ./$${dir}/Makefile ] ; then \
 666           rootme=`pwd`; export rootme; \
 667           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 668           (cd $${dir}; \
 669            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
 670         else \
 671           true; \
 672         fi
 673
 674 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
 675 .PHONY: all-gcc
 676 all-gcc:
 677         @if [ -f ./gcc/Makefile ] ; then \
 678           rootme=`pwd`; export rootme; \
 679           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 680           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
 681         else \
 682           true; \
 683         fi
 684
 685 .PHONY: install-gcc
 686 install-gcc:
 687         @if [ -f ./gcc/Makefile ] ; then \
 688           rootme=`pwd`; export rootme; \
 689           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 690           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 691         else \
 692           true; \
 693         fi
 694
 695 # This is a list of inter-dependencies among modules.
 696 all-autoconf:
 697 all-bfd:
 698 all-binutils: all-libiberty all-opcodes all-bfd all-flex
 699 all-byacc:
 700 # start-sanitize-chill
 701 all-chillrt: all-binutils all-gas all-gcc all-newlib
 702 # end-sanitize-chill
 703 all-cvs:
 704 all-dejagnu:
 705 all-diff: all-libiberty
 706 all-emacs:
 707 all-etc:
 708 all-expect: all-tcl
 709 all-fileutils:
 710 all-find:
 711 all-flex: all-libiberty all-byacc
 712 all-gas: all-libiberty all-opcodes all-bfd
 713 all-gawk:
 714 all-gcc: all-libiberty all-byacc all-binutils all-gas
 715 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc
 716 all-glob:
 717 all-gprof: all-libiberty all-bfd
 718 all-grep:
 719 all-gzip: all-libiberty
 720 all-hello: all-libiberty
 721 all-indent:
 722 all-ispell: all-emacs
 723 all-ld: all-libiberty all-bfd all-byacc all-flex
 724 all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
 725 all-libiberty:
 726 all-m4: all-libiberty
 727 all-make: all-libiberty
 728 all-mmalloc:
 729 all-newlib: all-binutils all-gas all-gcc
 730 all-opcodes:
 731 all-patch:
 732 all-prms:
 733 all-rcs:
 734 all-readline:
 735 all-recode: all-libiberty
 736 all-sed:
 737 all-send-pr:
 738 all-shellutils:
 739 all-sim: all-libiberty all-bfd
 740 all-tar: all-libiberty
 741 all-tcl:
 742 all-tclX: all-tcl all-tk
 743 all-tk: all-tcl
 744 all-texinfo: all-libiberty
 745 all-textutils:
 746 all-tgas: all-libiberty all-bfd
 747 all-time:
 748 all-wdiff:
 749 all-uudecode: all-libiberty
 750 all-xiberty: all-gcc all-newlib
 751
 752 ### other supporting targets
 753
 754 MAKEDIRS= \
 755         $(prefix) \
 756         $(exec_prefix) \
 757         $(tooldir)
 758
 759 .PHONY: install-dirs
 760 install-dirs:
 761         @for i in $(MAKEDIRS) ; do \
 762                 echo Making $$i... ; \
 763                 parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
 764                 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
 765                 if [ ! -d $$i ] ; then \
 766                         if mkdir $$i ; then \
 767                                 true ; \
 768                         else \
 769                                 exit 1 ; \
 770                         fi ; \
 771                 else \
 772                         true ; \
 773                 fi ; \
 774         done
 775
 776 .PHONY: install-info-dirs
 777 install-info-dirs:
 778         if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
 779         -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
 780         if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
 781         -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
 782
 783 dir.info: do-install-info
 784         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
 785           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
 786           mv -f dir.info.new dir.info ; \
 787         else true ; \
 788         fi
 789
 790 dist:
 791         @echo "Building a full distribution of this tree isn't done"
 792         @echo "via 'make dist'.  Check out the etc/ subdirectory"
 793
 794 etags tags: TAGS
 795
 796 TAGS:
 797         etags `$(MAKE) ls`
 798
 799 ls:
 800         @echo Makefile
 801         @for i in $(SUBDIRS); \
 802         do \
 803                 (cd $$i; \
 804                         pwd=`pwd`; \
 805                         wd=`basename $$pwd`; \
 806                         for j in `$(MAKE) ls`; \
 807                         do \
 808                                 echo $$wd/$$j; \
 809                         done) \
 810         done
 811
 812 # with the gnu make, this is done automatically.
 813
 814 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
 815         $(SHELL) ./config.status
 816
 817 #
 818 # Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
 819
 820 DEVO_SUPPORT= README Makefile.in configure configure.in \
 821         config.guess config.sub config move-if-change
 822 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
 823         configure.texi
 824 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
 825 GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
 826
 827 .PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z
 828 setup-dirs-gdb:
 829         ./configure sun4
 830         $(MAKE) clean
 831         ./configure -rm sun4
 832         chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
 833
 834 gdb.tar.Z: setup-dirs-gdb
 835         (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
 836         $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
 837
 838 make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
 839         rm -rf proto-toplev; mkdir proto-toplev
 840         ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
 841         (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
 842                 ln -s ../$$i . ; \
 843         done)
 844         mkdir proto-toplev/etc
 845         (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
 846                 ln -s ../../etc/$$i . ; \
 847         done)
 848         # Put only one copy (four hard links) of COPYING in the tar file.
 849         rm                          proto-toplev/bfd/COPYING
 850         ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
 851         rm                          proto-toplev/include/COPYING
 852         ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
 853         rm                          proto-toplev/readline/COPYING
 854         ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
 855
 856         # Take out texinfo and glob from configurable dirs
 857         rm proto-toplev/configure.in
 858         sed -e '/^host_tools=/s/texinfo //' \
 859             -e '/^host_libs=/s/glob //' \
 860             <configure.in >proto-toplev/configure.in
 861
 862         # Take out texinfo from a few places; make simple BISON=bison line.
 863         rm proto-toplev/Makefile.in
 864         sed -e '/^all\.normal: /s/\all-texinfo //' \
 865             -e '/^      install-texinfo /d' \
 866             -e '/^BISON = /,/^$$/d' \
 867             -e '/^# BISON:/s/.*/BISON = bison -y/' \
 868         <Makefile.in >proto-toplev/Makefile.in
 869
 870         mkdir proto-toplev/texinfo
 871         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
 872         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
 873         chmod og=u `find proto-toplev -print`
 874         (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
 875                 echo "==> Making gdb-$$VER.tar.Z"; \
 876                 ln -s proto-toplev gdb-$$VER; \
 877                 tar cfh - gdb-$$VER \
 878                 | compress -v >gdb-$$VER.tar.Z)
 879         $(GZIP) -d <gdb-$$VER.tar.Z | $(GZIP) -9 -v >gdb-$$VER.tar.z
 880
 881 # When you use `make setup-dirs' or `make taz' you should always redefine
 882 # this macro.
 883 SUPPORT_FILES = list-of-support-files-for-tool-in-question
 884 # Directories that might want `make proto-dir' run.
 885 PROTODIRS= gdb
 886
 887 .PHONY: setup-dirs taz
 888 setup-dirs:
 889         ./configure sun4
 890         $(MAKE) clean
 891         ./configure -rm sun4
 892         chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) -print`
 893         for d in .. $(PROTODIRS) ; do \
 894           if [ $$d != ".." ] && [ -d $$d ]; then \
 895             (cd $$d ; $(MAKE) -f Makefile.in proto-dir) ; \
 896           else true ; fi ; \
 897         done
 898
 899 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 900         rm -rf proto-toplev; mkdir proto-toplev
 901         for d in .. $(PROTODIRS) ; do \
 902           if [ $$d != .. ]; then \
 903             if [ -d $$d ]; then \
 904               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
 905             else true ; fi ; \
 906           else true ; fi ; \
 907         done
 908         (cd proto-toplev; for i in $(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES); do \
 909                 if [ ! -d $$i ]; then ln -s ../$$i . ; else true ; fi ; \
 910         done)
 911         mkdir proto-toplev/etc
 912         (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
 913                 ln -s ../../etc/$$i . ; \
 914         done)
 915         # Put only one copy (four hard links) of COPYING in the tar file.
 916         ## FIX ME LATER
 917
 918         # Take out texinfo and glob from configurable dirs
 919         rm proto-toplev/configure.in
 920         sed -e '/^host_tools=/s/texinfo //' \
 921             -e '/^host_libs=/s/glob //' \
 922             <configure.in >proto-toplev/configure.in
 923
 924         # Take out texinfo from a few places; make simple BISON=bison line.
 925         rm proto-toplev/Makefile.in
 926         sed -e '/^all\.normal: /s/\all-texinfo //' \
 927             -e '/^      install-texinfo /d' \
 928             -e '/^BISON = /,/^$$/d' \
 929             -e '/^# BISON:/s/.*/BISON = bison -y/' \
 930         <Makefile.in >proto-toplev/Makefile.in
 931
 932         mkdir proto-toplev/texinfo
 933         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
 934         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
 935         chmod og=u `find proto-toplev -print`
 936         (VER=`sed <$(TOOL)/Makefile.in -n 's/VERSION *= *//p'`; \
 937                 echo "==> Making $(TOOL)-$$VER.tar.z"; \
 938                 ln -s proto-toplev $(TOOL)-$$VER; \
 939                 tar cfh - $(TOOL)-$$VER \
 940                 | $(GZIP) -v >$(TOOL)-$$VER.tar.z)
 941
 942 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
 943
 944 .PHONY: gas.tar.z
 945 gas.tar.z: $(DEVO_SUPPORT) $(GAS_SUPPORT_DIRS) gas texinfo/texinfo.tex
 946         $(MAKE) -f Makefile.in setup-dirs SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
 947         $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
 948
 949
 950 .NOEXPORT:
 951 MAKEOVERRIDES=
 952
 953 # start-sanitize-chill
 954 ## This is ugly, but I don't want GNU make to put these variables in
 955 ## the environment.  Older makes will see this as a set of targets
 956 ## with no dependencies and no actions.
 957 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
 958 # end-sanitize-chill
 959
 960 # end of Makefile.in