Makefile.in

   1 #
   2 # Makefile for directory with subdirs to build.
   3 #   Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
   4 #
   5 # This file is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
  18 #
  19
  20 srcdir = .
  21
  22 prefix = /usr/local
  23
  24 exec_prefix = $(prefix)
  25 bindir = $(exec_prefix)/bin
  26 libdir = $(exec_prefix)/lib
  27 tooldir = $(exec_prefix)/$(target)
  28
  29 program_transform_name =
  30
  31 datadir = $(prefix)/lib
  32 mandir = $(prefix)/man
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = $(prefix)/info
  43 includedir = $(prefix)/include
  44 docdir = $(datadir)/doc
  45 GDB_NLM_DEPS =
  46
  47 SHELL = /bin/sh
  48
  49 INSTALL = $${srcroot}/install.sh -c
  50 INSTALL_PROGRAM = $(INSTALL)
  51 INSTALL_DATA = $(INSTALL) -m 644
  52 INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
  53
  54 INSTALL_DOSREL = install-dosrel-fake
  55
  56 AS = as
  57 AR = ar
  58 AR_FLAGS = rc
  59 CC = cc
  60
  61 # Special variables passed down in EXTRA_GCC_FLAGS.  They are defined
  62 # here so that they can be overridden by Makefile fragments.
  63 HOST_CC = $(CC_FOR_BUILD)
  64 HOST_PREFIX =
  65 HOST_PREFIX_1 = loser-
  66
  67 # We don't specify -g -O because many compilers don't support -g -O,
  68 # and/or -O is broken in and of itself.
  69 CFLAGS = -g
  70 LIBCFLAGS = $(CFLAGS)
  71 CFLAGS_FOR_TARGET = $(CFLAGS)
  72 LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
  73 PICFLAG =
  74 PICFLAG_FOR_TARGET =
  75
  76 # start-sanitize-chill
  77 CHILLFLAGS = $(CFLAGS)
  78 CHILL_LIB = -lchill
  79 # end-sanitize-chill
  80 CXX = gcc
  81
  82 # Use -O2 to stress test the compiler.
  83 CXXFLAGS = -g -O2
  84 LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
  85 CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
  86 LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
  87
  88 RANLIB = ranlib
  89 NM = nm
  90 # Not plain GZIP, since gzip looks there for extra command-line options.
  91 GZIPPROG = gzip
  92
  93 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
  94 BISON = `if [ -f $$r/byacc/byacc ] ; \
  95             then echo $$r/byacc/byacc ; \
  96             else echo byacc ; \
  97         fi`
  98
  99 LEX = `if [ -f $$r/flex/flex ] ; \
 100         then echo $$r/flex/flex ; \
 101         else echo flex ; fi`
 102
 103 M4 = `if [ -f $$r/m4/m4 ] ; \
 104         then echo $$r/m4/m4 ; \
 105         else echo m4 ; fi`
 106
 107 MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
 108         then echo $$r/texinfo/makeinfo/makeinfo ; \
 109         else echo makeinfo ; fi`
 110
 111 # This just becomes part of the MAKEINFO definition passed down to
 112 # sub-makes.  It lets flags be given on the command line while still
 113 # using the makeinfo from the object tree.
 114 MAKEINFOFLAGS =
 115
 116 EXPECT = `if [ -f $$r/expect/expect ] ; \
 117         then echo $$r/expect/expect ; \
 118         else echo expect ; fi`
 119
 120 RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
 121         then echo $${srcroot}/dejagnu/runtest ; \
 122         else echo runtest ; fi`
 123
 124
 125 # libraries that may need to be augmented on a system-by-system basis
 126 X11_LIB = -lX11
 127
 128 # compilers to use to create programs which must be run in the build
 129 # environment.
 130 CC_FOR_BUILD = $(CC)
 131 CXX_FOR_BUILD = $(CXX)
 132
 133 SUBDIRS = "this is set via configure, don't edit this"
 134 OTHERS =
 135
 136 ALL = all.normal
 137 INSTALL_TARGET = install-dirs \
 138         $(INSTALL_MODULES) \
 139         $(INSTALL_TARGET_MODULES) \
 140         $(INSTALL_X11_MODULES) \
 141         install-gcc \
 142         $(INSTALL_DOSREL)
 143
 144
 145 CC_FOR_TARGET = ` \
 146   if [ -f $$r/gcc/Makefile ] ; then \
 147     if [ -f $$r/newlib/Makefile ] ; then \
 148       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 149     else \
 150       echo $$r/gcc/xgcc -B$$r/gcc/; \
 151     fi; \
 152   else \
 153     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 154       echo $(CC); \
 155     else \
 156       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 157     fi; \
 158   fi`
 159
 160 # start-sanitize-chill
 161 CHILL_FOR_TARGET = ` \
 162   if [ -f $$r/gcc/Makefile ] ; then \
 163     echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \
 164   else \
 165     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 166       echo $(CC); \
 167     else \
 168       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 169     fi; \
 170   fi`
 171
 172 # end-sanitize-chill
 173
 174 CXX_FOR_TARGET = ` \
 175   if [ -f $$r/gcc/Makefile ] ; then \
 176     if [ -f $$r/newlib/Makefile ] ; then \
 177       echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
 178     else \
 179       echo $$r/gcc/xgcc -B$$r/gcc/; \
 180     fi; \
 181   else \
 182     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 183       echo $(CXX); \
 184     else \
 185       t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \
 186     fi; \
 187   fi`
 188
 189 AS_FOR_TARGET = ` \
 190   if [ -f $$r/gas/as.new ] ; then \
 191     echo $$r/gas/as.new ; \
 192   else \
 193     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 194       echo $(AS); \
 195     else \
 196        t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \
 197     fi; \
 198   fi`
 199
 200 DLLTOOL_FOR_TARGET = ` \
 201   if [ -f $$r/binutils/dlltool ] ; then \
 202     echo $$r/binutils/dlltool ; \
 203   else \
 204     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 205       echo $(DLLTOOL); \
 206     else \
 207        t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \
 208     fi; \
 209   fi`
 210
 211 AR_FOR_TARGET = ` \
 212   if [ -f $$r/binutils/ar ] ; then \
 213     echo $$r/binutils/ar ; \
 214   else \
 215     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 216       echo $(AR); \
 217     else \
 218        t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \
 219     fi; \
 220   fi`
 221
 222 RANLIB_FOR_TARGET = ` \
 223   if [ -f $$r/binutils/ranlib ] ; then \
 224     echo $$r/binutils/ranlib ; \
 225   else \
 226     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 227       echo $(RANLIB); \
 228     else \
 229        t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
 230     fi; \
 231   fi`
 232
 233 NM_FOR_TARGET = ` \
 234   if [ -f $$r/binutils/nm.new ] ; then \
 235     echo $$r/binutils/nm.new ; \
 236   else \
 237     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 238       echo $(NM); \
 239     else \
 240        t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \
 241     fi; \
 242   fi`
 243
 244 #### host and target specific makefile fragments come in here.
 245 ###
 246
 247 # Flags to pass down to all sub-makes.
 248 # Please keep these in alphabetical order.
 249 BASE_FLAGS_TO_PASS = \
 250         "AR_FLAGS=$(AR_FLAGS)" \
 251         "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
 252         "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
 253         "BISON=$(BISON)" \
 254         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 255         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 256         "CFLAGS=$(CFLAGS)" \
 257         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 258         $(start-sanitize-chill)\
 259         "CHILLFLAGS=$(CHILLFLAGS)" \
 260         "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
 261         "CHILL_LIB=$(CHILL_LIB)" \
 262         $(end-sanitize-chill)\
 263         "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
 264         "CXXFLAGS=$(CXXFLAGS)" \
 265         "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
 266         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 267         "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \
 268         "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
 269         "INSTALL=$(INSTALL)" \
 270         "INSTALL_DATA=$(INSTALL_DATA)" \
 271         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 272         "INSTALL_XFORM=$(INSTALL_XFORM)" \
 273         "LDFLAGS=$(LDFLAGS)" \
 274         "LEX=$(LEX)" \
 275         "LIBCFLAGS=$(LIBCFLAGS)" \
 276         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 277         "LIBCXXFLAGS=$(LIBCXXFLAGS)" \
 278         "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
 279         "M4=$(M4)" \
 280         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 281         "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
 282         "PICFLAG=$(PICFLAG)" \
 283         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 284         "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
 285         "SHELL=$(SHELL)" \
 286         "EXPECT=$(EXPECT)" \
 287         "RUNTEST=$(RUNTEST)" \
 288         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 289         "YACC=$(BISON)" \
 290         "exec_prefix=$(exec_prefix)" \
 291         "prefix=$(prefix)" \
 292         "tooldir=$(tooldir)"
 293
 294 # Flags to pass down to most sub-makes, in which we're building with
 295 # the host environment.
 296 # If any variables are added here, they must be added to do-*, below.
 297 EXTRA_HOST_FLAGS = \
 298         'AR=$(AR)' \
 299         'AS=$(AS)' \
 300         'CC=$(CC)' \
 301         'CXX=$(CXX)' \
 302         'NM=$(NM)' \
 303         'RANLIB=$(RANLIB)'
 304
 305 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
 306
 307 # Flags that are concerned with the location of the X11 include files
 308 # and library files
 309 X11_FLAGS_TO_PASS = \
 310         "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
 311         "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
 312         "X11_LIB=$(X11_LIB)"
 313
 314 # Flags to pass down to makes which are built with the target environment.
 315 # The double $ decreases the length of the command line; the variables
 316 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
 317 # If any variables are added here, they must be added to do-*, below.
 318 EXTRA_TARGET_FLAGS = \
 319         'AR=$$(AR_FOR_TARGET)' \
 320         'AS=$$(AS_FOR_TARGET)' \
 321         'CC=$$(CC_FOR_TARGET)' \
 322         'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
 323         'CXX=$$(CXX_FOR_TARGET)' \
 324         'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
 325         'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
 326         'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
 327         'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
 328         'NM=$$(NM_FOR_TARGET)' \
 329         'PICFLAG=$$(PICFLAG_FOR_TARGET)' \
 330         'RANLIB=$$(RANLIB_FOR_TARGET)'
 331
 332 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
 333
 334 # Flags to pass down to gcc.  gcc builds a library, libgcc.a, so it
 335 # unfortunately needs the native compiler and the target ar and
 336 # ranlib.
 337 # If any variables are added here, they must be added to do-*, below.
 338 # The HOST_* variables are a special case, which are used for the gcc
 339 # cross-building scheme.
 340 EXTRA_GCC_FLAGS = \
 341         'AR=$$(AR_FOR_TARGET)' \
 342         'AS=$(AS)' \
 343         'CC=$(CC)' \
 344         'CXX=$(CXX)' \
 345         'HOST_CC=$(CC_FOR_BUILD)' \
 346         'HOST_PREFIX=$(HOST_PREFIX)' \
 347         'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
 348         'NM=$(NM)' \
 349         'RANLIB=$$(RANLIB_FOR_TARGET)'
 350
 351 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
 352
 353 # This is a list of the targets for all of the modules which are compiled
 354 # using $(FLAGS_TO_PASS).
 355 ALL_MODULES = \
 356         all-autoconf \
 357         all-bfd \
 358         all-binutils \
 359         all-byacc \
 360         all-cvs \
 361         all-dejagnu \
 362         all-diff \
 363         all-dosutils \
 364         all-etc \
 365         all-fileutils \
 366         all-find \
 367         all-flex \
 368         all-gas \
 369         all-gawk \
 370         all-gprof \
 371         all-grep \
 372         all-gzip \
 373         all-hello \
 374         all-indent \
 375         all-ispell \
 376         all-ld \
 377         all-libiberty \
 378         all-m4 \
 379         all-make \
 380         all-mmalloc \
 381         all-opcodes \
 382         all-patch \
 383         all-prms \
 384         all-rcs \
 385         all-readline \
 386         all-release \
 387         all-recode \
 388         all-sed \
 389         all-send-pr \
 390         all-shellutils \
 391         all-sim \
 392         all-tar \
 393         all-tcl \
 394         all-texinfo \
 395         all-textutils \
 396         all-tgas \
 397         all-time \
 398         all-uudecode \
 399         all-wdiff
 400
 401 # This is a list of the check targets for all of the modules which are
 402 # compiled using $(FLAGS_TO_PASS).
 403 # This is a list of the check targets for all of the modules which are
 404 # compiled using $(FLAGS_TO_PASS).
 405 #
 406 # The list is in two parts.  The first lists those tools which
 407 # are tested as part of the host's native tool-chain, and not
 408 # tested in a cross configuration.
 409 NATIVE_CHECK_MODULES = \
 410         check-byacc \
 411         check-flex
 412
 413 CROSS_CHECK_MODULES = \
 414         check-autoconf \
 415         check-bfd \
 416         check-binutils \
 417         check-cvs \
 418         check-dejagnu \
 419         check-diff \
 420         check-etc \
 421         check-fileutils \
 422         check-find \
 423         check-gas \
 424         check-gawk \
 425         check-gprof \
 426         check-grep \
 427         check-gzip \
 428         check-hello \
 429         check-indent \
 430         check-ispell \
 431         check-ld \
 432         check-libiberty \
 433         check-m4 \
 434         check-make \
 435         check-mmcheckoc \
 436         check-opcodes \
 437         check-patch \
 438         check-prms \
 439         check-rcs \
 440         check-readline \
 441         check-recode \
 442         check-sed \
 443         check-send-pr \
 444         check-shellutils \
 445         check-sim \
 446         check-tar \
 447         check-tcl \
 448         check-texinfo \
 449         check-textutils \
 450         check-tgas \
 451         check-time \
 452         check-uudecode \
 453         check-wdiff
 454
 455 CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 456
 457 # This is a list of the install targets for all of the modules which are
 458 # compiled using $(FLAGS_TO_PASS).
 459 INSTALL_MODULES = \
 460         install-autoconf \
 461         install-bfd \
 462         install-binutils \
 463         install-byacc \
 464         install-cvs \
 465         install-dejagnu \
 466         install-diff \
 467         install-dosutils \
 468         install-etc \
 469         install-fileutils \
 470         install-find \
 471         install-flex \
 472         install-gas \
 473         install-gawk \
 474         install-gprof \
 475         install-grep \
 476         install-gzip \
 477         install-hello \
 478         install-indent \
 479         install-ispell \
 480         install-ld \
 481         install-libiberty \
 482         install-m4 \
 483         install-make \
 484         install-mmalloc \
 485         install-opcodes \
 486         install-patch \
 487         install-prms \
 488         install-rcs \
 489         install-readline \
 490         install-recode \
 491         install-sed \
 492         install-send-pr \
 493         install-shellutils \
 494         install-sim \
 495         install-tar \
 496         install-tcl \
 497         install-texinfo \
 498         install-textutils \
 499         install-tgas \
 500         install-time \
 501         install-uudecode \
 502         install-wdiff
 503
 504 # This is a list of the targets for all of the modules which are compiled
 505 # using $(X11_FLAGS_TO_PASS).
 506 ALL_X11_MODULES = \
 507         all-emacs \
 508         all-emacs19 \
 509         all-gdb \
 510         all-expect \
 511         all-gash \
 512         all-tclX \
 513         all-tk
 514
 515 # This is a list of the check targets for all of the modules which are
 516 # compiled using $(X11_FLAGS_TO_PASS).
 517 CHECK_X11_MODULES = \
 518         check-emacs \
 519         check-gdb \
 520         check-expect \
 521         check-gash \
 522         check-tclX \
 523         check-tk
 524
 525 # This is a list of the install targets for all the modules which are
 526 # compiled using $(X11_FLAGS_TO_PASS).
 527 INSTALL_X11_MODULES = \
 528         install-emacs \
 529         install-emacs19 \
 530         install-gdb \
 531         install-expect \
 532         install-gash \
 533         install-tclX \
 534         install-tk
 535
 536 # This is a list of the targets for all of the modules which are compiled
 537 # using $(TARGET_FLAGS_TO_PASS).
 538 ALL_TARGET_MODULES = \
 539         $(start-sanitize-chill) \
 540         all-chillrt \
 541         $(end-sanitize-chill) \
 542         all-libio \
 543         all-libstdc++ \
 544         all-librx \
 545         all-libg++ \
 546         all-newlib \
 547         all-libgloss \
 548         all-xiberty
 549
 550 # This is a list of the check targets for all of the modules which are
 551 # compiled using $(TARGET_FLAGS_TO_PASS).
 552 CHECK_TARGET_MODULES = \
 553         $(start-sanitize-chill) \
 554         check-chillrt \
 555         $(end-sanitize-chill) \
 556         check-libio \
 557         check-libstdc++ \
 558         check-libg++ \
 559         check-newlib \
 560         check-xiberty
 561
 562 # This is a list of the install targets for all of the modules which are
 563 # compiled using $(TARGET_FLAGS_TO_PASS).
 564 INSTALL_TARGET_MODULES = \
 565         $(start-sanitize-chill) \
 566         install-chillrt \
 567         $(end-sanitize-chill) \
 568         install-libio \
 569         install-libstdc++ \
 570         install-libg++ \
 571         install-newlib \
 572         install-libgloss \
 573         install-xiberty
 574
 575 # This is a shell case of all modules which are compiled using
 576 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
 577 TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty
 578 # start-sanitize-chill
 579 TARGET_LIBS = chillrt | libio | libstdc++ | librx | libg++ | newlib | xiberty
 580 # end-sanitize-chill
 581
 582 # The first rule in the file had better be this one.  Don't put any above it.
 583 all: all.normal
 584 .PHONY: all
 585
 586 # The target built for a native build.
 587 .PHONY: all.normal
 588 all.normal: \
 589         $(ALL_MODULES) \
 590         $(ALL_TARGET_MODULES) \
 591         $(ALL_X11_MODULES) \
 592         all-gcc
 593
 594 # Do a target for all the subdirectories.  A ``make do-X'' will do a
 595 # ``make X'' in all subdirectories (because, in general, there is a
 596 # dependency (below) of X upon do-X, a ``make X'' will also do this,
 597 # but it may do additional work as well).
 598 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
 599 # because it is so large that it can easily overflow the command line
 600 # length limit on some systems.
 601 DO_X = \
 602         do-clean \
 603         do-distclean \
 604         do-dvi \
 605         do-info \
 606         do-install-info \
 607         do-installcheck \
 608         do-mostlyclean \
 609         do-realclean \
 610         do-TAGS
 611 .PHONY: $(DO_X)
 612 $(DO_X):
 613         @target=`echo $@ | sed -e 's/^do-//'`; \
 614         r=`pwd`; export r; \
 615         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 616         for i in $(SUBDIRS); do \
 617           if [ -f ./$$i/Makefile ]; then \
 618             case $$i in \
 619             $(TARGET_LIBS) ) \
 620               for flag in $(EXTRA_TARGET_FLAGS); do \
 621                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 622               done; \
 623               ;; \
 624             gcc) \
 625               for flag in $(EXTRA_GCC_FLAGS); do \
 626                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 627               done; \
 628               ;; \
 629             *) \
 630               for flag in $(EXTRA_HOST_FLAGS); do \
 631                 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
 632               done; \
 633               ;; \
 634             esac ; \
 635             export AR AS CC CXX NM RANLIB; \
 636             if (cd ./$$i; \
 637                 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
 638                         "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
 639                         "RANLIB=$${RANLIB}" \
 640                         $${target}); \
 641             then true; else exit 1; fi; \
 642           else true; fi; \
 643         done
 644
 645 # Here are the targets which correspond to the do-X targets.
 646
 647 .PHONY: info installcheck dvi install-info
 648 .PHONY: clean distclean mostlyclean realclean local-clean local-distclean
 649 info: do-info
 650 installcheck: do-installcheck
 651 dvi: do-dvi
 652
 653 install-info: do-install-info dir.info
 654         srcroot=`cd $(srcdir); pwd`; export srcroot; \
 655         if [ -f dir.info ] ; then \
 656           $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
 657         else true ; fi
 658
 659 local-clean:
 660         -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
 661
 662 local-distclean:
 663         -rm -f Makefile config.status
 664
 665 clean: do-clean local-clean
 666 mostlyclean: do-mostlyclean local-clean
 667 distclean: do-distclean local-clean local-distclean
 668 realclean: do-realclean local-clean local-distclean
 669
 670 # Check target.
 671
 672 .PHONY: check
 673 check: $(CHECK_MODULES) \
 674         $(CHECK_TARGET_MODULES) \
 675         $(CHECK_X11_MODULES) \
 676         check-gcc
 677
 678 # Installation targets.
 679
 680 .PHONY: install uninstall source-vault binary-vault vault-install
 681 install: $(INSTALL_TARGET)
 682
 683 uninstall:
 684         @echo "the uninstall target is not supported in this tree"
 685
 686 source-vault:
 687         $(MAKE) -f ./release/Build-A-Release \
 688                 host=$(host_alias) source-vault
 689
 690 binary-vault:
 691         $(MAKE) -f ./release/Build-A-Release \
 692                 host=$(host_alias) target=$(target_alias)
 693
 694 vault-install:
 695         @if [ -f ./release/vault-install ] ; then \
 696           ./release/vault-install $(host_alias) $(target_alias) ; \
 697         else \
 698           true ; \
 699         fi
 700
 701 .PHONY: install.all
 702 install.all: install-no-fixedincludes
 703         @if [ -f ./gcc/Makefile ] ; then \
 704                 r=`pwd` ; export r ; \
 705                 (cd ./gcc; \
 706                 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
 707         else \
 708                 true ; \
 709         fi
 710
 711 # install-no-fixedincludes is used because Cygnus can not distribute
 712 # the fixed header files.
 713 .PHONY: install-no-fixedincludes
 714 install-no-fixedincludes: \
 715         install-dirs \
 716         $(INSTALL_MODULES) \
 717         $(INSTALL_TARGET_MODULES) \
 718         $(INSTALL_X11_MODULES) \
 719         gcc-no-fixedincludes
 720
 721 # Install the gcc headers files, but not the fixed include files,
 722 # which Cygnus is not allowed to distribute.  This rule is very
 723 # dependent on the workings of the gcc Makefile.in.
 724 .PHONY: gcc-no-fixedincludes
 725 gcc-no-fixedincludes:
 726         @if [ -f ./gcc/Makefile ]; then \
 727           rm -rf gcc/tmp-include; \
 728           mv gcc/include gcc/tmp-include 2>/dev/null; \
 729           mkdir gcc/include; \
 730           cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
 731           touch gcc/stmp-fixinc gcc/include/fixed; \
 732           rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
 733           r=`pwd`; export r; \
 734           srcroot=`cd $(srcdir); pwd` ; export srcroot; \
 735           (cd ./gcc; \
 736            $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 737           rm -rf gcc/include; \
 738           mv gcc/tmp-include gcc/include 2>/dev/null; \
 739         else true; fi
 740
 741 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 742 # build a target all-X means to cd to X and make all.
 743 #
 744 # all-gui, and all-libproc are handled specially because
 745 # they are still experimental, and if they fail to build, that
 746 # shouldn't stop "make all".
 747 .PHONY: $(ALL_MODULES) all-gui all-libproc
 748 $(ALL_MODULES) all-gui all-libproc:
 749         @dir=`echo $@ | sed -e 's/all-//'`; \
 750         if [ -f ./$${dir}/Makefile ] ; then \
 751           r=`pwd`; export r; \
 752           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 753           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
 754         else \
 755           true; \
 756         fi
 757
 758 # These rules are used to check the modules which use FLAGS_TO_PASS.
 759 # To build a target check-X means to cd to X and make check.  Some
 760 # modules are only tested in a native toolchain.
 761
 762 .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 763 $(NATIVE_CHECK_MODULES):
 764         @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 765           dir=`echo $@ | sed -e 's/check-//'`; \
 766           if [ -f ./$${dir}/Makefile ] ; then \
 767             r=`pwd`; export r; \
 768             srcroot=`cd $(srcdir); pwd`; export srcroot; \
 769             (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 770           else \
 771             true; \
 772           fi; \
 773         fi
 774
 775 $(CROSS_CHECK_MODULES):
 776         @dir=`echo $@ | sed -e 's/check-//'`; \
 777         if [ -f ./$${dir}/Makefile ] ; then \
 778           r=`pwd`; export r; \
 779           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 780           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
 781         else \
 782           true; \
 783         fi
 784
 785 # This rule is used to install the modules which use FLAGS_TO_PASS.
 786 # To build a target install-X means to cd to X and make install.
 787 .PHONY: $(INSTALL_MODULES)
 788 $(INSTALL_MODULES): install-dirs
 789         @dir=`echo $@ | sed -e 's/install-//'`; \
 790         if [ -f ./$${dir}/Makefile ] ; then \
 791           r=`pwd`; export r; \
 792           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 793           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 794         else \
 795           true; \
 796         fi
 797
 798 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
 799 # To build a target all-X means to cd to X and make all.
 800 .PHONY: $(ALL_TARGET_MODULES)
 801 $(ALL_TARGET_MODULES):
 802         @dir=`echo $@ | sed -e 's/all-//'`; \
 803         if [ -f ./$${dir}/Makefile ] ; then \
 804           r=`pwd`; export r; \
 805           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 806           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
 807         else \
 808           true; \
 809         fi
 810
 811 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
 812 # To build a target install-X means to cd to X and make install.
 813 .PHONY: $(CHECK_TARGET_MODULES)
 814 $(CHECK_TARGET_MODULES):
 815         @dir=`echo $@ | sed -e 's/check-//'`; \
 816         if [ -f ./$${dir}/Makefile ] ; then \
 817           r=`pwd`; export r; \
 818           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 819           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
 820         else \
 821           true; \
 822         fi
 823
 824 # This rule is used to install the modules which use
 825 # TARGET_FLAGS_TO_PASS.  To build a target install-X means to cd to X
 826 # and make install.
 827 .PHONY: $(INSTALL_TARGET_MODULES)
 828 $(INSTALL_TARGET_MODULES): install-dirs
 829         @dir=`echo $@ | sed -e 's/install-//'`; \
 830         if [ -f ./$${dir}/Makefile ] ; then \
 831           r=`pwd`; export r; \
 832           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 833           (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
 834         else \
 835           true; \
 836         fi
 837
 838 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
 839 # To build a target all-X means to cd to X and make all.
 840 .PHONY: $(ALL_X11_MODULES)
 841 $(ALL_X11_MODULES):
 842         @dir=`echo $@ | sed -e 's/all-//'`; \
 843         if [ -f ./$${dir}/Makefile ] ; then \
 844           r=`pwd`; export r; \
 845           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 846           (cd $${dir}; \
 847            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
 848         else \
 849           true; \
 850         fi
 851
 852 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
 853 # To build a target check-X means to cd to X and make all.
 854 .PHONY: $(CHECK_X11_MODULES)
 855 $(CHECK_X11_MODULES):
 856         @dir=`echo $@ | sed -e 's/check-//'`; \
 857         if [ -f ./$${dir}/Makefile ] ; then \
 858           r=`pwd`; export r; \
 859           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 860           (cd $${dir}; \
 861            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
 862         else \
 863           true; \
 864         fi
 865
 866 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
 867 # To build a target install-X means to cd to X and make install.
 868 .PHONY: $(INSTALL_X11_MODULES)
 869 $(INSTALL_X11_MODULES):
 870         @dir=`echo $@ | sed -e 's/install-//'`; \
 871         if [ -f ./$${dir}/Makefile ] ; then \
 872           r=`pwd`; export r; \
 873           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 874           (cd $${dir}; \
 875            $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
 876         else \
 877           true; \
 878         fi
 879
 880 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
 881 .PHONY: all-gcc
 882 all-gcc:
 883         @if [ -f ./gcc/Makefile ] ; then \
 884           r=`pwd`; export r; \
 885           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 886           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
 887         else \
 888           true; \
 889         fi
 890
 891 .PHONY: check-gcc
 892 check-gcc:
 893         @if [ -f ./gcc/Makefile ] ; then \
 894           r=`pwd`; export r; \
 895           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 896           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
 897         else \
 898           true; \
 899         fi
 900
 901 .PHONY: install-gcc
 902 install-gcc:
 903         @if [ -f ./gcc/Makefile ] ; then \
 904           r=`pwd`; export r; \
 905           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 906           (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
 907         else \
 908           true; \
 909         fi
 910
 911
 912 # EXPERIMENTAL STUFF
 913 # This rule is used to install the modules which use FLAGS_TO_PASS.
 914 # To build a target install-X means to cd to X and make install.
 915 .PHONY: install-dosrel
 916 install-dosrel: install-dirs info
 917         @dir=`echo $@ | sed -e 's/install-//'`; \
 918         if [ -f ./$${dir}/Makefile ] ; then \
 919           r=`pwd`; export r; \
 920           srcroot=`cd $(srcdir); pwd`; export srcroot; \
 921           (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
 922         else \
 923           true; \
 924         fi
 925
 926 install-dosrel-fake:
 927
 928
 929 # This is a list of inter-dependencies among modules.
 930 all-autoconf: all-m4
 931 all-bfd:
 932 all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
 933 all-byacc:
 934 # start-sanitize-chill
 935 all-chillrt: all-binutils all-gas all-gcc all-newlib
 936 # end-sanitize-chill
 937 all-cvs:
 938 all-dejagnu: all-tcl all-expect all-tk
 939 all-diff: all-libiberty
 940 all-emacs:
 941 all-emacs19: all-byacc
 942 all-etc:
 943 all-expect: all-tcl all-tk
 944 all-fileutils: all-libiberty
 945 all-find:
 946 all-flex: all-libiberty all-byacc
 947 all-gas: all-libiberty all-opcodes all-bfd
 948 all-gash: all-tcl
 949 all-gawk:
 950 all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld
 951 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements)
 952 all-gprof: all-libiberty all-bfd
 953 all-grep: all-libiberty
 954 all-gui: all-gdb all-libproc all-librx
 955 all-gzip: all-libiberty
 956 all-hello: all-libiberty
 957 all-indent:
 958 all-ispell: all-emacs19
 959 all-ld: all-libiberty all-bfd all-byacc all-flex
 960 all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio all-librx all-libstdc++
 961 all-libio: all-gas all-ld all-gcc all-xiberty all-newlib
 962 all-libiberty:
 963 all-libstdc++: all-gas all-ld all-gcc all-xiberty all-newlib all-libio
 964 all-m4: all-libiberty
 965 all-make: all-libiberty
 966 all-mmalloc:
 967 all-newlib: all-binutils all-gas all-gcc
 968 all-opcodes: all-bfd
 969 all-patch:
 970 all-prms: all-libiberty
 971 all-rcs:
 972 all-readline:
 973 all-recode: all-libiberty
 974 all-sed: all-libiberty
 975 all-send-pr: all-prms
 976 all-shellutils:
 977 all-sim: all-libiberty all-bfd
 978 all-tar: all-libiberty
 979 all-tcl:
 980 all-tclX: all-tcl all-tk
 981 all-tk: all-tcl
 982 all-texinfo: all-libiberty
 983 all-textutils:
 984 all-tgas: all-libiberty all-bfd
 985 all-time:
 986 all-wdiff:
 987 all-uudecode: all-libiberty
 988 all-xiberty: all-gcc all-ld all-newlib
 989
 990 ### other supporting targets
 991
 992 MAKEDIRS= \
 993         $(prefix) \
 994         $(exec_prefix) \
 995         $(tooldir)
 996
 997 .PHONY: install-dirs
 998 install-dirs:
 999         @for i in $(MAKEDIRS) ; do \
1000                 echo Making $$i... ; \
1001                 parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
1002                 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
1003                 if [ ! -d $$i ] ; then \
1004                         if mkdir $$i ; then \
1005                                 true ; \
1006                         else \
1007                                 exit 1 ; \
1008                         fi ; \
1009                 else \
1010                         true ; \
1011                 fi ; \
1012         done
1013
1014
1015 dir.info: do-install-info
1016         if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
1017           $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
1018           mv -f dir.info.new dir.info ; \
1019         else true ; \
1020         fi
1021
1022 dist:
1023         @echo "Building a full distribution of this tree isn't done"
1024         @echo "via 'make dist'.  Check out the etc/ subdirectory"
1025
1026 etags tags: TAGS
1027
1028 # Right now this just builds TAGS in each subdirectory.  emacs19 has the
1029 # ability to use several tags files at once, so there is probably no need
1030 # to combine them into one big TAGS file (like CVS 1.3 does).  We could
1031 # (if we felt like it) have this Makefile write a piece of elisp which
1032 # the user could load to tell emacs19 where all the TAGS files we just
1033 # built are.
1034 TAGS: do-TAGS
1035
1036 # with the gnu make, this is done automatically.
1037
1038 Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
1039         $(SHELL) ./config.status
1040
1041 #
1042 # Support for building net releases
1043
1044 # Files in devo used in any net release.
1045 # ChangeLog omitted because it may refer to files which are not in this
1046 # distribution (perhaps it would be better to include it anyway).
1047 DEVO_SUPPORT= README Makefile.in configure configure.in \
1048         config.guess config.sub config move-if-change \
1049         COPYING COPYING.LIB install.sh
1050
1051 # Files in devo/etc used in any net release.
1052 # ChangeLog omitted because it may refer to files which are not in this
1053 # distribution (perhaps it would be better to include it anyway).
1054 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
1055         configure.texi standards.texi make-stds.texi
1056 ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
1057
1058 # When you use `make setup-dirs' or `make taz' you should always redefine
1059 # this macro.
1060 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1061 # Directories that might want `make diststuff' run.
1062 DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas
1063 # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
1064 DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
1065 # Directories where "info" should be built.
1066 DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc
1067
1068 .PHONY: taz
1069
1070 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
1071   texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1072         # Make sure "diststuff" files get built properly.
1073         for f in $(DISTBISONFILES) ; do \
1074           if [ -r $$f ]; then \
1075             sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
1076             mv -f tmp $$f ; \
1077           else true; fi ; \
1078         done
1079         # Take out texinfo from a few places; make simple BISON=bison line.
1080         sed -e '/^all\.normal: /s/\all-texinfo //' \
1081             -e '/^      install-texinfo /d' \
1082             -e '/^BISON = /,/^$$/d' \
1083             -e '/^# BISON:/s/.*/BISON = bison -y/' \
1084         <Makefile.in >tmp
1085         mv -f tmp Makefile.in
1086         #
1087         $(start-sanitize-Sanitize)
1088         @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
1089         $(end-sanitize-Sanitize)
1090         ./configure sun4
1091         # Doc files don't change; include them in distribution.
1092         for f in $(DISTDOCDIRS) ; do \
1093           if [ -r $$f/Makefile ]; then \
1094             (cd $$f ; $(MAKE) info) || exit 1 ; \
1095           else true ; fi ; \
1096         done
1097         # Make links, and run "make diststuff" when needed.
1098         # The `echo' for setting `p' is to convert all whitespace to spaces.
1099         # Then the `case' further below should tell whether $$d is in
1100         # DISTSTUFFDIRS.
1101         rm -rf proto-toplev ; mkdir proto-toplev
1102         set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1103         p=" `echo $(DISTSTUFFDIRS)` " ; \
1104         for d in $$dirs ; do \
1105           if [ -d $$d ]; then \
1106             case " $$p " in \
1107             *" $$d "*)  \
1108                 (cd $$d ; $(MAKE) diststuff ) || exit 1  ;; \
1109             esac ; \
1110             if [ -d $$d/proto-$$d.dir ]; then \
1111               ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
1112             else \
1113               ln -s ../$$d proto-toplev/$$d ; \
1114             fi ; \
1115           else ln -s ../$$d proto-toplev/$$d ; fi ; \
1116         done
1117         $(MAKE) distclean
1118         #
1119         mkdir proto-toplev/etc
1120         (cd proto-toplev/etc; \
1121          for i in $(ETC_SUPPORT); do \
1122                 ln -s ../../etc/$$i . ; \
1123          done ; \
1124          for i in $(ETC_SUPPORT_PFX); do \
1125                 ln -s ../../etc/$$i* . ; \
1126          done)
1127         #
1128         # Take out texinfo from configurable dirs
1129         rm proto-toplev/configure.in
1130         sed -e '/^host_tools=/s/texinfo //' \
1131             <configure.in >proto-toplev/configure.in
1132         #
1133         mkdir proto-toplev/texinfo
1134         ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1135         ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
1136         ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
1137         ln -s ../../texinfo/tex3patch   proto-toplev/texinfo/
1138         chmod og=u `find . -print`
1139         (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
1140                 echo "==> Making $(TOOL)-$$VER.tar.gz"; \
1141                 rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
1142                 tar cfh - $(TOOL)-$$VER \
1143                 | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
1144
1145 TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
1146 DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
1147
1148 .PHONY: gas.tar.gz
1149 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
1150 gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
1151         $(MAKE) -f Makefile.in taz TOOL=gas \
1152                 SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
1153
1154 # The FSF "binutils" release includes gprof and ld.
1155 .PHONY: binutils.tar.gz
1156 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
1157 binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
1158         $(MAKE) -f Makefile.in taz TOOL=binutils \
1159                 SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
1160
1161 .PHONY: gas+binutils.tar.gz
1162 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1163 gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
1164         $(MAKE) -f Makefile.in taz TOOL=gas \
1165                 SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
1166
1167 .PHONY: libg++.tar.gz
1168 LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty xiberty
1169 libg++.tar.gz: $(DIST_SUPPORT) libg++
1170         $(MAKE) -f Makefile.in taz TOOL=libg++ \
1171                 SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
1172
1173 GNATS_SUPPORT_DIRS=include libiberty send-pr
1174 gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
1175         $(MAKE) -f  Makefile.in taz TOOL=gnats \
1176                 SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
1177
1178 .PHONY: gdb.tar.gz
1179 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim
1180 gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
1181         $(MAKE) -f Makefile.in taz TOOL=gdb \
1182                 SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
1183
1184 .PHONY: newlib.tar.gz
1185 NEWLIB_SUPPORT_DIRS=libgloss
1186 # taz configures for the sun4 target which won't configure newlib.
1187 # We need newlib configured so that the .info files are made.
1188 # Unfortunately, it is not enough to just configure newlib separately:
1189 # taz will build the .info files but since SUBDIRS won't contain newlib,
1190 # distclean won't be run (leaving Makefile, config.status, and the tmp files
1191 # used in building the .info files, eg: *.def, *.ref).
1192 # Compensate here by configuring newlib for a simple (no multilib support)
1193 # cross target (sparc64), building the info files, and doing make distclean
1194 # ourselves.
1195 newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
1196         rootme=`pwd` ; \
1197           cd newlib && ../configure --srcdir $$rootme/newlib \
1198                 --host sun4 --target sparc64-elf
1199         cd newlib ; make info
1200         cd newlib ; make distclean
1201         $(MAKE) -f Makefile.in taz TOOL=newlib \
1202                 SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
1203                 DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \
1204                 DISTDOCDIRS="$(DISTDOCDIRS) newlib"
1205
1206 .NOEXPORT:
1207 MAKEOVERRIDES=
1208
1209 # start-sanitize-chill
1210 ## This is ugly, but I don't want GNU make to put these variables in
1211 ## the environment.  Older makes will see this as a set of targets
1212 ## with no dependencies and no actions.
1213 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1214 # end-sanitize-chill
1215
1216 # end of Makefile.in