2 # Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License version 2 as
6 # published by the Free Software Foundation.
11 select CLONE_BACKWARDS
12 # ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
13 select DEVTMPFS if !INITRAMFS_SOURCE=""
14 select GENERIC_ATOMIC64
15 select GENERIC_CLOCKEVENTS
16 select GENERIC_FIND_FIRST_BIT
17 # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
18 select GENERIC_IRQ_SHOW
19 select GENERIC_KERNEL_EXECVE
20 select GENERIC_KERNEL_THREAD
21 select GENERIC_PENDING_IRQ if SMP
22 select GENERIC_SMP_IDLE_THREAD
24 select HAVE_ARCH_TRACEHOOK
25 select HAVE_GENERIC_HARDIRQS
26 select HAVE_IOREMAP_PROT
28 select HAVE_KRETPROBES
30 select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
32 select HAVE_PERF_EVENTS
34 select MODULES_USE_ELF_RELA
37 select OF_EARLY_FLATTREE
38 select PERF_USE_VMALLOC
40 config SCHED_OMIT_FRAME_POINTER
46 config RWSEM_GENERIC_SPINLOCK
49 config ARCH_FLATMEM_ENABLE
58 config GENERIC_CALIBRATE_DELAY
61 config GENERIC_HWEIGHT
64 config STACKTRACE_SUPPORT
68 config HAVE_LATENCYTOP_SUPPORT
75 source "kernel/Kconfig.freezer"
77 menu "ARC Architecture Configuration"
79 menu "ARC Platform/SoC/Board"
81 source "arch/arc/plat-arcfpga/Kconfig"
82 #New platform adds here
86 menu "ARC CPU Configuration"
95 Support for ARC750 core
99 select ARC_CPU_REL_4_10
101 Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
102 This core has a bunch of cool new features:
103 -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
104 Shared Address Spaces (for sharing TLB entires in MMU)
105 -Caches: New Prog Model, Region Flush
106 -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
110 config CPU_BIG_ENDIAN
111 bool "Enable Big Endian Mode"
114 Build kernel for Big Endian Mode of ARC CPU
116 # If a platform can't work with 0x8000_0000 based dma_addr_t
117 config ARC_PLAT_NEEDS_CPU_TO_DMA
121 bool "Symmetric Multi-Processing (Incomplete)"
123 select USE_GENERIC_SMP_HELPERS
125 This enables support for systems with more than one CPU. If you have
126 a system with only one CPU, like most personal computers, say N. If
127 you have a system with more than one CPU, say Y.
131 config ARC_HAS_COH_CACHES
134 config ARC_HAS_COH_RTSC
137 config ARC_HAS_REENTRANT_IRQ_LV2
143 int "Maximum number of CPUs (2-32)"
149 bool "Enable Cache Support"
151 # if SMP, cache enabled ONLY if ARC implementation has cache coherency
152 depends on !SMP || ARC_HAS_COH_CACHES
156 config ARC_CACHE_LINE_SHIFT
157 int "Cache Line Length (as power of 2)"
161 Starting with ARC700 4.9, Cache line length is configurable,
162 This option specifies "N", with Line-len = 2 power N
163 So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
164 Linux only supports same line lengths for I and D caches.
166 config ARC_HAS_ICACHE
167 bool "Use Instruction Cache"
170 config ARC_HAS_DCACHE
171 bool "Use Data Cache"
174 config ARC_CACHE_PAGES
175 bool "Per Page Cache Control"
177 depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
179 This can be used to over-ride the global I/D Cache Enable on a
180 per-page basis (but only for pages accessed via MMU such as
181 Kernel Virtual address or User Virtual Address)
182 TLB entries have a per-page Cache Enable Bit.
183 Note that Global I/D ENABLE + Per Page DISABLE works but corollary
184 Global DISABLE + Per Page ENABLE won't work
191 Single Cycle RAMS to store Fast Path Code
195 int "ICCM Size in KB"
197 depends on ARC_HAS_ICCM
202 Single Cycle RAMS to store Fast Path Data
206 int "DCCM Size in KB"
208 depends on ARC_HAS_DCCM
211 hex "DCCM map address"
213 depends on ARC_HAS_DCCM
215 config ARC_HAS_HW_MPY
216 bool "Use Hardware Multiplier (Normal or Faster XMAC)"
219 Influences how gcc generates code for MPY operations.
220 If enabled, MPYxx insns are generated, provided by Standard/XMAC
221 Multipler. Otherwise software multipy lib is used
224 prompt "ARC700 MMU Version"
225 default ARC_MMU_V3 if ARC_CPU_770
226 default ARC_MMU_V2 if ARC_CPU_750D
236 Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
237 when 2 D-TLB and 1 I-TLB entries index into same 2way set.
241 depends on ARC_CPU_770
243 Introduced with ARC700 4.10: New Features
244 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
245 Shared Address Spaces (SASID)
251 prompt "MMU Page Size"
252 default ARC_PAGE_SIZE_8K
254 config ARC_PAGE_SIZE_8K
257 Choose between 8k vs 16k
259 config ARC_PAGE_SIZE_16K
261 depends on ARC_MMU_V3
263 config ARC_PAGE_SIZE_4K
265 depends on ARC_MMU_V3
269 config ARC_COMPACT_IRQ_LEVELS
270 bool "ARCompact IRQ Priorities: High(2)/Low(1)"
272 # Timer HAS to be high priority, for any other high priority config
274 # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
275 depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
277 if ARC_COMPACT_IRQ_LEVELS
290 config ARC_FPU_SAVE_RESTORE
291 bool "Enable FPU state persistence across context switch"
294 Double Precision Floating Point unit had dedictaed regs which
295 need to be saved/restored across context-switch.
296 Note that ARC FPU is overly simplistic, unlike say x86, which has
297 hardware pieces to allow software to conditionally save/restore,
298 based on actual usage of FPU by a task. Thus our implemn does
299 this for all tasks in system.
304 menuconfig ARC_CPU_REL_4_10
305 bool "Enable support for Rel 4.10 features"
308 -ARC770 (and dependent features) enabled
309 -ARC750 also shares some of the new features with 770
312 bool "Insn: LLOCK/SCOND (efficient atomic ops)"
314 depends on ARC_CPU_770 && !ARC_CANT_LLSC
317 bool "Insn: SWAPE (endian-swap)"
319 depends on ARC_CPU_REL_4_10
322 bool "Insn: RTSC (64-bit r/o cycle counter)"
324 depends on ARC_CPU_REL_4_10
325 # if SMP, enable RTSC only if counter is coherent across cores
326 depends on !SMP || ARC_HAS_COH_RTSC
328 endmenu # "ARC CPU Configuration"
330 config LINUX_LINK_BASE
331 hex "Linux Link Address"
334 ARC700 divides the 32 bit phy address space into two equal halves
335 -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
336 -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
337 Typically Linux kernel is linked at the start of untransalted addr,
338 hence the default value of 0x8zs.
339 However some customers have peripherals mapped at this addr, so
340 Linux needs to be scooted a bit.
341 If you don't know what the above means, leave this setting alone.
343 config ARC_CURR_IN_REG
344 bool "Dedicate Register r25 for current_task pointer"
347 This reserved Register R25 to point to Current Task in
348 kernel mode. This saves memory access for each such access
351 config ARC_MISALIGN_ACCESS
352 bool "Emulate unaligned memory access (userspace only)"
354 select SYSCTL_ARCH_UNALIGN_NO_WARN
355 select SYSCTL_ARCH_UNALIGN_ALLOW
357 This enables misaligned 16 & 32 bit memory access from user space.
358 Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
359 potential bugs in code
361 config ARC_STACK_NONEXEC
362 bool "Make stack non-executable"
365 To disable the execute permissions of stack/heap of processes
366 which are enabled by default.
369 int "Timer Frequency"
372 config ARC_METAWARE_HLINK
373 bool "Support for Metaware debugger assisted Host access"
376 This options allows a Linux userland apps to directly access
377 host file system (open/creat/read/write etc) with help from
378 Metaware Debugger. This can come in handy for Linux-host communication
379 when there is no real usable peripheral such as EMAC.
385 config ARC_DW2_UNWIND
386 bool "Enable DWARF specific kernel stack unwind"
391 Compiles the kernel with DWARF unwind information and can be used
392 to get stack backtraces.
394 If you say Y here the resulting kernel image will be slightly larger
395 but not slower, and it will give very useful debugging information.
396 If you don't debug the kernel, you can say N, but we may not be able
397 to solve problems without frame unwind information
399 config ARC_DBG_TLB_PARANOIA
400 bool "Paranoia Checks in Low Level TLB Handlers"
404 config ARC_DBG_TLB_MISS_COUNT
405 bool "Profile TLB Misses"
410 Counts number of I and D TLB Misses and exports them via Debugfs
411 The counters can be cleared via Debugfs as well
414 string "Kernel command line to built-in"
415 default "print-fatal-signals=1"
417 The default command line which will be appended to the optional
418 u-boot provided command line (see below)
421 bool "Support U-boot kernel command line passing"
424 If you are using U-boot (www.denx.de) and wish to pass the kernel
425 command line from the U-boot environment to the Linux kernel then
426 switch this option on.
427 ARC U-boot will setup the cmdline in RAM/flash and set r2 to point
428 to it. kernel startup code will copy the string into cmdline buffer
429 and also append CONFIG_CMDLINE.
431 config ARC_BUILTIN_DTB_NAME
432 string "Built in DTB"
434 Set the name of the DTB to embed in the vmlinux binary
435 Leaving it blank selects the minimal "skeleton" dtb
437 source "kernel/Kconfig.preempt"
439 menu "Executable file formats"
440 source "fs/Kconfig.binfmt"
443 endmenu # "ARC Architecture Configuration"
447 source "drivers/Kconfig"
449 source "arch/arc/Kconfig.debug"
450 source "security/Kconfig"
451 source "crypto/Kconfig"