arch/arm/Kconfig

   1 config ARM
   2         bool
   3         default y
   4         select ARCH_BINFMT_ELF_RANDOMIZE_PIE
   5         select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
   6         select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
   7         select ARCH_HAVE_CUSTOM_GPIO_H
   8         select ARCH_HAS_GCOV_PROFILE_ALL
   9         select ARCH_MIGHT_HAVE_PC_PARPORT
  10         select ARCH_SUPPORTS_ATOMIC_RMW
  11         select ARCH_USE_BUILTIN_BSWAP
  12         select ARCH_USE_CMPXCHG_LOCKREF
  13         select ARCH_WANT_IPC_PARSE_VERSION
  14         select BUILDTIME_EXTABLE_SORT if MMU
  15         select CLONE_BACKWARDS
  16         select CPU_PM if (SUSPEND || CPU_IDLE)
  17         select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
  18         select GENERIC_ALLOCATOR
  19         select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
  20         select GENERIC_CLOCKEVENTS_BROADCAST if SMP
  21         select GENERIC_IDLE_POLL_SETUP
  22         select GENERIC_IRQ_PROBE
  23         select GENERIC_IRQ_SHOW
  24         select GENERIC_PCI_IOMAP
  25         select GENERIC_SCHED_CLOCK
  26         select GENERIC_SMP_IDLE_THREAD
  27         select GENERIC_STRNCPY_FROM_USER
  28         select GENERIC_STRNLEN_USER
  29         select HANDLE_DOMAIN_IRQ
  30         select HARDIRQS_SW_RESEND
  31         select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
  32         select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
  33         select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
  34         select HAVE_ARCH_KGDB
  35         select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
  36         select HAVE_ARCH_TRACEHOOK
  37         select HAVE_BPF_JIT
  38         select HAVE_CC_STACKPROTECTOR
  39         select HAVE_CONTEXT_TRACKING
  40         select HAVE_C_RECORDMCOUNT
  41         select HAVE_DEBUG_KMEMLEAK
  42         select HAVE_DMA_API_DEBUG
  43         select HAVE_DMA_ATTRS
  44         select HAVE_DMA_CONTIGUOUS if MMU
  45         select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
  46         select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
  47         select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
  48         select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
  49         select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
  50         select HAVE_GENERIC_DMA_COHERENT
  51         select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
  52         select HAVE_IDE if PCI || ISA || PCMCIA
  53         select HAVE_IRQ_TIME_ACCOUNTING
  54         select HAVE_KERNEL_GZIP
  55         select HAVE_KERNEL_LZ4
  56         select HAVE_KERNEL_LZMA
  57         select HAVE_KERNEL_LZO
  58         select HAVE_KERNEL_XZ
  59         select HAVE_KPROBES if !XIP_KERNEL
  60         select HAVE_KRETPROBES if (HAVE_KPROBES)
  61         select HAVE_MEMBLOCK
  62         select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
  63         select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
  64         select HAVE_OPTPROBES if !THUMB2_KERNEL
  65         select HAVE_PERF_EVENTS
  66         select HAVE_PERF_REGS
  67         select HAVE_PERF_USER_STACK_DUMP
  68         select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
  69         select HAVE_REGS_AND_STACK_ACCESS_API
  70         select HAVE_SYSCALL_TRACEPOINTS
  71         select HAVE_UID16
  72         select HAVE_VIRT_CPU_ACCOUNTING_GEN
  73         select IRQ_FORCED_THREADING
  74         select MODULES_USE_ELF_REL
  75         select NO_BOOTMEM
  76         select OLD_SIGACTION
  77         select OLD_SIGSUSPEND3
  78         select PERF_USE_VMALLOC
  79         select RTC_LIB
  80         select SYS_SUPPORTS_APM_EMULATION
  81         # Above selects are sorted alphabetically; please add new ones
  82         # according to that.  Thanks.
  83         help
  84           The ARM series is a line of low-power-consumption RISC chip designs
  85           licensed by ARM Ltd and targeted at embedded applications and
  86           handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
  87           manufactured, but legacy ARM-based PC hardware remains popular in
  88           Europe.  There is an ARM Linux project with a web page at
  89           <http://www.arm.linux.org.uk/>.
  90
  91 config ARM_HAS_SG_CHAIN
  92         select ARCH_HAS_SG_CHAIN
  93         bool
  94
  95 config NEED_SG_DMA_LENGTH
  96         bool
  97
  98 config ARM_DMA_USE_IOMMU
  99         bool
 100         select ARM_HAS_SG_CHAIN
 101         select NEED_SG_DMA_LENGTH
 102
 103 if ARM_DMA_USE_IOMMU
 104
 105 config ARM_DMA_IOMMU_ALIGNMENT
 106         int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
 107         range 4 9
 108         default 8
 109         help
 110           DMA mapping framework by default aligns all buffers to the smallest
 111           PAGE_SIZE order which is greater than or equal to the requested buffer
 112           size. This works well for buffers up to a few hundreds kilobytes, but
 113           for larger buffers it just a waste of address space. Drivers which has
 114           relatively small addressing window (like 64Mib) might run out of
 115           virtual space with just a few allocations.
 116
 117           With this parameter you can specify the maximum PAGE_SIZE order for
 118           DMA IOMMU buffers. Larger buffers will be aligned only to this
 119           specified order. The order is expressed as a power of two multiplied
 120           by the PAGE_SIZE.
 121
 122 endif
 123
 124 config MIGHT_HAVE_PCI
 125         bool
 126
 127 config SYS_SUPPORTS_APM_EMULATION
 128         bool
 129
 130 config HAVE_TCM
 131         bool
 132         select GENERIC_ALLOCATOR
 133
 134 config HAVE_PROC_CPU
 135         bool
 136
 137 config NO_IOPORT_MAP
 138         bool
 139
 140 config EISA
 141         bool
 142         ---help---
 143           The Extended Industry Standard Architecture (EISA) bus was
 144           developed as an open alternative to the IBM MicroChannel bus.
 145
 146           The EISA bus provided some of the features of the IBM MicroChannel
 147           bus while maintaining backward compatibility with cards made for
 148           the older ISA bus.  The EISA bus saw limited use between 1988 and
 149           1995 when it was made obsolete by the PCI bus.
 150
 151           Say Y here if you are building a kernel for an EISA-based machine.
 152
 153           Otherwise, say N.
 154
 155 config SBUS
 156         bool
 157
 158 config STACKTRACE_SUPPORT
 159         bool
 160         default y
 161
 162 config HAVE_LATENCYTOP_SUPPORT
 163         bool
 164         depends on !SMP
 165         default y
 166
 167 config LOCKDEP_SUPPORT
 168         bool
 169         default y
 170
 171 config TRACE_IRQFLAGS_SUPPORT
 172         bool
 173         default y
 174
 175 config RWSEM_XCHGADD_ALGORITHM
 176         bool
 177         default y
 178
 179 config ARCH_HAS_ILOG2_U32
 180         bool
 181
 182 config ARCH_HAS_ILOG2_U64
 183         bool
 184
 185 config ARCH_HAS_BANDGAP
 186         bool
 187
 188 config GENERIC_HWEIGHT
 189         bool
 190         default y
 191
 192 config GENERIC_CALIBRATE_DELAY
 193         bool
 194         default y
 195
 196 config ARCH_MAY_HAVE_PC_FDC
 197         bool
 198
 199 config ZONE_DMA
 200         bool
 201
 202 config NEED_DMA_MAP_STATE
 203        def_bool y
 204
 205 config ARCH_SUPPORTS_UPROBES
 206         def_bool y
 207
 208 config ARCH_HAS_DMA_SET_COHERENT_MASK
 209         bool
 210
 211 config GENERIC_ISA_DMA
 212         bool
 213
 214 config FIQ
 215         bool
 216
 217 config NEED_RET_TO_USER
 218         bool
 219
 220 config ARCH_MTD_XIP
 221         bool
 222
 223 config VECTORS_BASE
 224         hex
 225         default 0xffff0000 if MMU || CPU_HIGH_VECTOR
 226         default DRAM_BASE if REMAP_VECTORS_TO_RAM
 227         default 0x00000000
 228         help
 229           The base address of exception vectors.  This must be two pages
 230           in size.
 231
 232 config ARM_PATCH_PHYS_VIRT
 233         bool "Patch physical to virtual translations at runtime" if EMBEDDED
 234         default y
 235         depends on !XIP_KERNEL && MMU
 236         depends on !ARCH_REALVIEW || !SPARSEMEM
 237         help
 238           Patch phys-to-virt and virt-to-phys translation functions at
 239           boot and module load time according to the position of the
 240           kernel in system memory.
 241
 242           This can only be used with non-XIP MMU kernels where the base
 243           of physical memory is at a 16MB boundary.
 244
 245           Only disable this option if you know that you do not require
 246           this feature (eg, building a kernel for a single machine) and
 247           you need to shrink the kernel to the minimal size.
 248
 249 config NEED_MACH_IO_H
 250         bool
 251         help
 252           Select this when mach/io.h is required to provide special
 253           definitions for this platform.  The need for mach/io.h should
 254           be avoided when possible.
 255
 256 config NEED_MACH_MEMORY_H
 257         bool
 258         help
 259           Select this when mach/memory.h is required to provide special
 260           definitions for this platform.  The need for mach/memory.h should
 261           be avoided when possible.
 262
 263 config PHYS_OFFSET
 264         hex "Physical address of main memory" if MMU
 265         depends on !ARM_PATCH_PHYS_VIRT
 266         default DRAM_BASE if !MMU
 267         default 0x00000000 if ARCH_EBSA110 || \
 268                         EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
 269                         ARCH_FOOTBRIDGE || \
 270                         ARCH_INTEGRATOR || \
 271                         ARCH_IOP13XX || \
 272                         ARCH_KS8695 || \
 273                         (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
 274         default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 275         default 0x20000000 if ARCH_S5PV210
 276         default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
 277         default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
 278         default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
 279         default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
 280         default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 281         help
 282           Please provide the physical address corresponding to the
 283           location of main memory in your system.
 284
 285 config GENERIC_BUG
 286         def_bool y
 287         depends on BUG
 288
 289 config PGTABLE_LEVELS
 290         int
 291         default 3 if ARM_LPAE
 292         default 2
 293
 294 source "init/Kconfig"
 295
 296 source "kernel/Kconfig.freezer"
 297
 298 menu "System Type"
 299
 300 config MMU
 301         bool "MMU-based Paged Memory Management Support"
 302         default y
 303         help
 304           Select if you want MMU-based virtualised addressing space
 305           support by paged memory management. If unsure, say 'Y'.
 306
 307 #
 308 # The "ARM system type" choice list is ordered alphabetically by option
 309 # text.  Please add new entries in the option alphabetic order.
 310 #
 311 choice
 312         prompt "ARM system type"
 313         default ARCH_VERSATILE if !MMU
 314         default ARCH_MULTIPLATFORM if MMU
 315
 316 config ARCH_MULTIPLATFORM
 317         bool "Allow multiple platforms to be selected"
 318         depends on MMU
 319         select ARCH_WANT_OPTIONAL_GPIOLIB
 320         select ARM_HAS_SG_CHAIN
 321         select ARM_PATCH_PHYS_VIRT
 322         select AUTO_ZRELADDR
 323         select CLKSRC_OF
 324         select COMMON_CLK
 325         select GENERIC_CLOCKEVENTS
 326         select MIGHT_HAVE_PCI
 327         select MULTI_IRQ_HANDLER
 328         select SPARSE_IRQ
 329         select USE_OF
 330
 331 config ARCH_REALVIEW
 332         bool "ARM Ltd. RealView family"
 333         select ARCH_WANT_OPTIONAL_GPIOLIB
 334         select ARM_AMBA
 335         select ARM_TIMER_SP804
 336         select COMMON_CLK
 337         select COMMON_CLK_VERSATILE
 338         select GENERIC_CLOCKEVENTS
 339         select GPIO_PL061 if GPIOLIB
 340         select ICST
 341         select NEED_MACH_MEMORY_H
 342         select PLAT_VERSATILE
 343         select PLAT_VERSATILE_SCHED_CLOCK
 344         help
 345           This enables support for ARM Ltd RealView boards.
 346
 347 config ARCH_VERSATILE
 348         bool "ARM Ltd. Versatile family"
 349         select ARCH_WANT_OPTIONAL_GPIOLIB
 350         select ARM_AMBA
 351         select ARM_TIMER_SP804
 352         select ARM_VIC
 353         select CLKDEV_LOOKUP
 354         select GENERIC_CLOCKEVENTS
 355         select HAVE_MACH_CLKDEV
 356         select ICST
 357         select PLAT_VERSATILE
 358         select PLAT_VERSATILE_CLOCK
 359         select PLAT_VERSATILE_SCHED_CLOCK
 360         select VERSATILE_FPGA_IRQ
 361         help
 362           This enables support for ARM Ltd Versatile board.
 363
 364 config ARCH_AT91
 365         bool "Atmel AT91"
 366         select ARCH_REQUIRE_GPIOLIB
 367         select CLKDEV_LOOKUP
 368         select IRQ_DOMAIN
 369         select NEED_MACH_IO_H if PCCARD
 370         select PINCTRL
 371         select PINCTRL_AT91
 372         select USE_OF
 373         help
 374           This enables support for systems based on Atmel
 375           AT91RM9200, AT91SAM9 and SAMA5 processors.
 376
 377 config ARCH_CLPS711X
 378         bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 379         select ARCH_REQUIRE_GPIOLIB
 380         select AUTO_ZRELADDR
 381         select CLKSRC_MMIO
 382         select COMMON_CLK
 383         select CPU_ARM720T
 384         select GENERIC_CLOCKEVENTS
 385         select MFD_SYSCON
 386         select SOC_BUS
 387         help
 388           Support for Cirrus Logic 711x/721x/731x based boards.
 389
 390 config ARCH_GEMINI
 391         bool "Cortina Systems Gemini"
 392         select ARCH_REQUIRE_GPIOLIB
 393         select CLKSRC_MMIO
 394         select CPU_FA526
 395         select GENERIC_CLOCKEVENTS
 396         help
 397           Support for the Cortina Systems Gemini family SoCs
 398
 399 config ARCH_EBSA110
 400         bool "EBSA-110"
 401         select ARCH_USES_GETTIMEOFFSET
 402         select CPU_SA110
 403         select ISA
 404         select NEED_MACH_IO_H
 405         select NEED_MACH_MEMORY_H
 406         select NO_IOPORT_MAP
 407         help
 408           This is an evaluation board for the StrongARM processor available
 409           from Digital. It has limited hardware on-board, including an
 410           Ethernet interface, two PCMCIA sockets, two serial ports and a
 411           parallel port.
 412
 413 config ARCH_EFM32
 414         bool "Energy Micro efm32"
 415         depends on !MMU
 416         select ARCH_REQUIRE_GPIOLIB
 417         select ARM_NVIC
 418         select AUTO_ZRELADDR
 419         select CLKSRC_OF
 420         select COMMON_CLK
 421         select CPU_V7M
 422         select GENERIC_CLOCKEVENTS
 423         select NO_DMA
 424         select NO_IOPORT_MAP
 425         select SPARSE_IRQ
 426         select USE_OF
 427         help
 428           Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
 429           processors.
 430
 431 config ARCH_EP93XX
 432         bool "EP93xx-based"
 433         select ARCH_HAS_HOLES_MEMORYMODEL
 434         select ARCH_REQUIRE_GPIOLIB
 435         select ARCH_USES_GETTIMEOFFSET
 436         select ARM_AMBA
 437         select ARM_VIC
 438         select CLKDEV_LOOKUP
 439         select CPU_ARM920T
 440         help
 441           This enables support for the Cirrus EP93xx series of CPUs.
 442
 443 config ARCH_FOOTBRIDGE
 444         bool "FootBridge"
 445         select CPU_SA110
 446         select FOOTBRIDGE
 447         select GENERIC_CLOCKEVENTS
 448         select HAVE_IDE
 449         select NEED_MACH_IO_H if !MMU
 450         select NEED_MACH_MEMORY_H
 451         help
 452           Support for systems based on the DC21285 companion chip
 453           ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 454
 455 config ARCH_NETX
 456         bool "Hilscher NetX based"
 457         select ARM_VIC
 458         select CLKSRC_MMIO
 459         select CPU_ARM926T
 460         select GENERIC_CLOCKEVENTS
 461         help
 462           This enables support for systems based on the Hilscher NetX Soc
 463
 464 config ARCH_IOP13XX
 465         bool "IOP13xx-based"
 466         depends on MMU
 467         select CPU_XSC3
 468         select NEED_MACH_MEMORY_H
 469         select NEED_RET_TO_USER
 470         select PCI
 471         select PLAT_IOP
 472         select VMSPLIT_1G
 473         select SPARSE_IRQ
 474         help
 475           Support for Intel's IOP13XX (XScale) family of processors.
 476
 477 config ARCH_IOP32X
 478         bool "IOP32x-based"
 479         depends on MMU
 480         select ARCH_REQUIRE_GPIOLIB
 481         select CPU_XSCALE
 482         select GPIO_IOP
 483         select NEED_RET_TO_USER
 484         select PCI
 485         select PLAT_IOP
 486         help
 487           Support for Intel's 80219 and IOP32X (XScale) family of
 488           processors.
 489
 490 config ARCH_IOP33X
 491         bool "IOP33x-based"
 492         depends on MMU
 493         select ARCH_REQUIRE_GPIOLIB
 494         select CPU_XSCALE
 495         select GPIO_IOP
 496         select NEED_RET_TO_USER
 497         select PCI
 498         select PLAT_IOP
 499         help
 500           Support for Intel's IOP33X (XScale) family of processors.
 501
 502 config ARCH_IXP4XX
 503         bool "IXP4xx-based"
 504         depends on MMU
 505         select ARCH_HAS_DMA_SET_COHERENT_MASK
 506         select ARCH_REQUIRE_GPIOLIB
 507         select ARCH_SUPPORTS_BIG_ENDIAN
 508         select CLKSRC_MMIO
 509         select CPU_XSCALE
 510         select DMABOUNCE if PCI
 511         select GENERIC_CLOCKEVENTS
 512         select MIGHT_HAVE_PCI
 513         select NEED_MACH_IO_H
 514         select USB_EHCI_BIG_ENDIAN_DESC
 515         select USB_EHCI_BIG_ENDIAN_MMIO
 516         help
 517           Support for Intel's IXP4XX (XScale) family of processors.
 518
 519 config ARCH_DOVE
 520         bool "Marvell Dove"
 521         select ARCH_REQUIRE_GPIOLIB
 522         select CPU_PJ4
 523         select GENERIC_CLOCKEVENTS
 524         select MIGHT_HAVE_PCI
 525         select MVEBU_MBUS
 526         select PINCTRL
 527         select PINCTRL_DOVE
 528         select PLAT_ORION_LEGACY
 529         help
 530           Support for the Marvell Dove SoC 88AP510
 531
 532 config ARCH_MV78XX0
 533         bool "Marvell MV78xx0"
 534         select ARCH_REQUIRE_GPIOLIB
 535         select CPU_FEROCEON
 536         select GENERIC_CLOCKEVENTS
 537         select MVEBU_MBUS
 538         select PCI
 539         select PLAT_ORION_LEGACY
 540         help
 541           Support for the following Marvell MV78xx0 series SoCs:
 542           MV781x0, MV782x0.
 543
 544 config ARCH_ORION5X
 545         bool "Marvell Orion"
 546         depends on MMU
 547         select ARCH_REQUIRE_GPIOLIB
 548         select CPU_FEROCEON
 549         select GENERIC_CLOCKEVENTS
 550         select MVEBU_MBUS
 551         select PCI
 552         select PLAT_ORION_LEGACY
 553         help
 554           Support for the following Marvell Orion 5x series SoCs:
 555           Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
 556           Orion-2 (5281), Orion-1-90 (6183).
 557
 558 config ARCH_MMP
 559         bool "Marvell PXA168/910/MMP2"
 560         depends on MMU
 561         select ARCH_REQUIRE_GPIOLIB
 562         select CLKDEV_LOOKUP
 563         select GENERIC_ALLOCATOR
 564         select GENERIC_CLOCKEVENTS
 565         select GPIO_PXA
 566         select IRQ_DOMAIN
 567         select MULTI_IRQ_HANDLER
 568         select PINCTRL
 569         select PLAT_PXA
 570         select SPARSE_IRQ
 571         help
 572           Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 573
 574 config ARCH_KS8695
 575         bool "Micrel/Kendin KS8695"
 576         select ARCH_REQUIRE_GPIOLIB
 577         select CLKSRC_MMIO
 578         select CPU_ARM922T
 579         select GENERIC_CLOCKEVENTS
 580         select NEED_MACH_MEMORY_H
 581         help
 582           Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 583           System-on-Chip devices.
 584
 585 config ARCH_W90X900
 586         bool "Nuvoton W90X900 CPU"
 587         select ARCH_REQUIRE_GPIOLIB
 588         select CLKDEV_LOOKUP
 589         select CLKSRC_MMIO
 590         select CPU_ARM926T
 591         select GENERIC_CLOCKEVENTS
 592         help
 593           Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 594           At present, the w90x900 has been renamed nuc900, regarding
 595           the ARM series product line, you can login the following
 596           link address to know more.
 597
 598           <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
 599                 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 600
 601 config ARCH_LPC32XX
 602         bool "NXP LPC32XX"
 603         select ARCH_REQUIRE_GPIOLIB
 604         select ARM_AMBA
 605         select CLKDEV_LOOKUP
 606         select CLKSRC_MMIO
 607         select CPU_ARM926T
 608         select GENERIC_CLOCKEVENTS
 609         select HAVE_IDE
 610         select USE_OF
 611         help
 612           Support for the NXP LPC32XX family of processors
 613
 614 config ARCH_PXA
 615         bool "PXA2xx/PXA3xx-based"
 616         depends on MMU
 617         select ARCH_MTD_XIP
 618         select ARCH_REQUIRE_GPIOLIB
 619         select ARM_CPU_SUSPEND if PM
 620         select AUTO_ZRELADDR
 621         select CLKDEV_LOOKUP
 622         select CLKSRC_MMIO
 623         select CLKSRC_OF
 624         select GENERIC_CLOCKEVENTS
 625         select GPIO_PXA
 626         select HAVE_IDE
 627         select IRQ_DOMAIN
 628         select MULTI_IRQ_HANDLER
 629         select PLAT_PXA
 630         select SPARSE_IRQ
 631         help
 632           Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 633
 634 config ARCH_MSM
 635         bool "Qualcomm MSM (non-multiplatform)"
 636         select ARCH_REQUIRE_GPIOLIB
 637         select COMMON_CLK
 638         select GENERIC_CLOCKEVENTS
 639         help
 640           Support for Qualcomm MSM/QSD based systems.  This runs on the
 641           apps processor of the MSM/QSD and depends on a shared memory
 642           interface to the modem processor which runs the baseband
 643           stack and controls some vital subsystems
 644           (clock and power control, etc).
 645
 646 config ARCH_SHMOBILE_LEGACY
 647         bool "Renesas ARM SoCs (non-multiplatform)"
 648         select ARCH_SHMOBILE
 649         select ARM_PATCH_PHYS_VIRT if MMU
 650         select CLKDEV_LOOKUP
 651         select CPU_V7
 652         select GENERIC_CLOCKEVENTS
 653         select HAVE_ARM_SCU if SMP
 654         select HAVE_ARM_TWD if SMP
 655         select HAVE_MACH_CLKDEV
 656         select HAVE_SMP
 657         select MIGHT_HAVE_CACHE_L2X0
 658         select MULTI_IRQ_HANDLER
 659         select NO_IOPORT_MAP
 660         select PINCTRL
 661         select PM_GENERIC_DOMAINS if PM
 662         select SH_CLK_CPG
 663         select SPARSE_IRQ
 664         help
 665           Support for Renesas ARM SoC platforms using a non-multiplatform
 666           kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
 667           and RZ families.
 668
 669 config ARCH_RPC
 670         bool "RiscPC"
 671         select ARCH_ACORN
 672         select ARCH_MAY_HAVE_PC_FDC
 673         select ARCH_SPARSEMEM_ENABLE
 674         select ARCH_USES_GETTIMEOFFSET
 675         select CPU_SA110
 676         select FIQ
 677         select HAVE_IDE
 678         select HAVE_PATA_PLATFORM
 679         select ISA_DMA_API
 680         select NEED_MACH_IO_H
 681         select NEED_MACH_MEMORY_H
 682         select NO_IOPORT_MAP
 683         select VIRT_TO_BUS
 684         help
 685           On the Acorn Risc-PC, Linux can support the internal IDE disk and
 686           CD-ROM interface, serial and parallel port, and the floppy drive.
 687
 688 config ARCH_SA1100
 689         bool "SA1100-based"
 690         select ARCH_MTD_XIP
 691         select ARCH_REQUIRE_GPIOLIB
 692         select ARCH_SPARSEMEM_ENABLE
 693         select CLKDEV_LOOKUP
 694         select CLKSRC_MMIO
 695         select CPU_FREQ
 696         select CPU_SA1100
 697         select GENERIC_CLOCKEVENTS
 698         select HAVE_IDE
 699         select IRQ_DOMAIN
 700         select ISA
 701         select MULTI_IRQ_HANDLER
 702         select NEED_MACH_MEMORY_H
 703         select SPARSE_IRQ
 704         help
 705           Support for StrongARM 11x0 based boards.
 706
 707 config ARCH_S3C24XX
 708         bool "Samsung S3C24XX SoCs"
 709         select ARCH_REQUIRE_GPIOLIB
 710         select ATAGS
 711         select CLKDEV_LOOKUP
 712         select CLKSRC_SAMSUNG_PWM
 713         select GENERIC_CLOCKEVENTS
 714         select GPIO_SAMSUNG
 715         select HAVE_S3C2410_I2C if I2C
 716         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 717         select HAVE_S3C_RTC if RTC_CLASS
 718         select MULTI_IRQ_HANDLER
 719         select NEED_MACH_IO_H
 720         select SAMSUNG_ATAGS
 721         help
 722           Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
 723           and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
 724           (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
 725           Samsung SMDK2410 development board (and derivatives).
 726
 727 config ARCH_S3C64XX
 728         bool "Samsung S3C64XX"
 729         select ARCH_REQUIRE_GPIOLIB
 730         select ARM_AMBA
 731         select ARM_VIC
 732         select ATAGS
 733         select CLKDEV_LOOKUP
 734         select CLKSRC_SAMSUNG_PWM
 735         select COMMON_CLK_SAMSUNG
 736         select CPU_V6K
 737         select GENERIC_CLOCKEVENTS
 738         select GPIO_SAMSUNG
 739         select HAVE_S3C2410_I2C if I2C
 740         select HAVE_S3C2410_WATCHDOG if WATCHDOG
 741         select HAVE_TCM
 742         select NO_IOPORT_MAP
 743         select PLAT_SAMSUNG
 744         select PM_GENERIC_DOMAINS if PM
 745         select S3C_DEV_NAND
 746         select S3C_GPIO_TRACK
 747         select SAMSUNG_ATAGS
 748         select SAMSUNG_WAKEMASK
 749         select SAMSUNG_WDT_RESET
 750         help
 751           Samsung S3C64XX series based systems
 752
 753 config ARCH_DAVINCI
 754         bool "TI DaVinci"
 755         select ARCH_HAS_HOLES_MEMORYMODEL
 756         select ARCH_REQUIRE_GPIOLIB
 757         select CLKDEV_LOOKUP
 758         select GENERIC_ALLOCATOR
 759         select GENERIC_CLOCKEVENTS
 760         select GENERIC_IRQ_CHIP
 761         select HAVE_IDE
 762         select TI_PRIV_EDMA
 763         select USE_OF
 764         select ZONE_DMA
 765         help
 766           Support for TI's DaVinci platform.
 767
 768 config ARCH_OMAP1
 769         bool "TI OMAP1"
 770         depends on MMU
 771         select ARCH_HAS_HOLES_MEMORYMODEL
 772         select ARCH_OMAP
 773         select ARCH_REQUIRE_GPIOLIB
 774         select CLKDEV_LOOKUP
 775         select CLKSRC_MMIO
 776         select GENERIC_CLOCKEVENTS
 777         select GENERIC_IRQ_CHIP
 778         select HAVE_IDE
 779         select IRQ_DOMAIN
 780         select NEED_MACH_IO_H if PCCARD
 781         select NEED_MACH_MEMORY_H
 782         help
 783           Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
 784
 785 endchoice
 786
 787 menu "Multiple platform selection"
 788         depends on ARCH_MULTIPLATFORM
 789
 790 comment "CPU Core family selection"
 791
 792 config ARCH_MULTI_V4
 793         bool "ARMv4 based platforms (FA526)"
 794         depends on !ARCH_MULTI_V6_V7
 795         select ARCH_MULTI_V4_V5
 796         select CPU_FA526
 797
 798 config ARCH_MULTI_V4T
 799         bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 800         depends on !ARCH_MULTI_V6_V7
 801         select ARCH_MULTI_V4_V5
 802         select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
 803                 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
 804                 CPU_ARM925T || CPU_ARM940T)
 805
 806 config ARCH_MULTI_V5
 807         bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
 808         depends on !ARCH_MULTI_V6_V7
 809         select ARCH_MULTI_V4_V5
 810         select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
 811                 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
 812                 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
 813
 814 config ARCH_MULTI_V4_V5
 815         bool
 816
 817 config ARCH_MULTI_V6
 818         bool "ARMv6 based platforms (ARM11)"
 819         select ARCH_MULTI_V6_V7
 820         select CPU_V6K
 821
 822 config ARCH_MULTI_V7
 823         bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 824         default y
 825         select ARCH_MULTI_V6_V7
 826         select CPU_V7
 827         select HAVE_SMP
 828
 829 config ARCH_MULTI_V6_V7
 830         bool
 831         select MIGHT_HAVE_CACHE_L2X0
 832
 833 config ARCH_MULTI_CPU_AUTO
 834         def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
 835         select ARCH_MULTI_V5
 836
 837 endmenu
 838
 839 config ARCH_VIRT
 840         bool "Dummy Virtual Machine" if ARCH_MULTI_V7
 841         select ARM_AMBA
 842         select ARM_GIC
 843         select ARM_PSCI
 844         select HAVE_ARM_ARCH_TIMER
 845
 846 #
 847 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 848 # Kconfigs may be included either alphabetically (according to the
 849 # plat- suffix) or along side the corresponding mach-* source.
 850 #
 851 source "arch/arm/mach-mvebu/Kconfig"
 852
 853 source "arch/arm/mach-asm9260/Kconfig"
 854
 855 source "arch/arm/mach-at91/Kconfig"
 856
 857 source "arch/arm/mach-axxia/Kconfig"
 858
 859 source "arch/arm/mach-bcm/Kconfig"
 860
 861 source "arch/arm/mach-berlin/Kconfig"
 862
 863 source "arch/arm/mach-clps711x/Kconfig"
 864
 865 source "arch/arm/mach-cns3xxx/Kconfig"
 866
 867 source "arch/arm/mach-davinci/Kconfig"
 868
 869 source "arch/arm/mach-digicolor/Kconfig"
 870
 871 source "arch/arm/mach-dove/Kconfig"
 872
 873 source "arch/arm/mach-ep93xx/Kconfig"
 874
 875 source "arch/arm/mach-footbridge/Kconfig"
 876
 877 source "arch/arm/mach-gemini/Kconfig"
 878
 879 source "arch/arm/mach-highbank/Kconfig"
 880
 881 source "arch/arm/mach-hisi/Kconfig"
 882
 883 source "arch/arm/mach-integrator/Kconfig"
 884
 885 source "arch/arm/mach-iop32x/Kconfig"
 886
 887 source "arch/arm/mach-iop33x/Kconfig"
 888
 889 source "arch/arm/mach-iop13xx/Kconfig"
 890
 891 source "arch/arm/mach-ixp4xx/Kconfig"
 892
 893 source "arch/arm/mach-keystone/Kconfig"
 894
 895 source "arch/arm/mach-ks8695/Kconfig"
 896
 897 source "arch/arm/mach-meson/Kconfig"
 898
 899 source "arch/arm/mach-msm/Kconfig"
 900
 901 source "arch/arm/mach-moxart/Kconfig"
 902
 903 source "arch/arm/mach-mv78xx0/Kconfig"
 904
 905 source "arch/arm/mach-imx/Kconfig"
 906
 907 source "arch/arm/mach-mediatek/Kconfig"
 908
 909 source "arch/arm/mach-mxs/Kconfig"
 910
 911 source "arch/arm/mach-netx/Kconfig"
 912
 913 source "arch/arm/mach-nomadik/Kconfig"
 914
 915 source "arch/arm/mach-nspire/Kconfig"
 916
 917 source "arch/arm/plat-omap/Kconfig"
 918
 919 source "arch/arm/mach-omap1/Kconfig"
 920
 921 source "arch/arm/mach-omap2/Kconfig"
 922
 923 source "arch/arm/mach-orion5x/Kconfig"
 924
 925 source "arch/arm/mach-picoxcell/Kconfig"
 926
 927 source "arch/arm/mach-pxa/Kconfig"
 928 source "arch/arm/plat-pxa/Kconfig"
 929
 930 source "arch/arm/mach-mmp/Kconfig"
 931
 932 source "arch/arm/mach-qcom/Kconfig"
 933
 934 source "arch/arm/mach-realview/Kconfig"
 935
 936 source "arch/arm/mach-rockchip/Kconfig"
 937
 938 source "arch/arm/mach-sa1100/Kconfig"
 939
 940 source "arch/arm/mach-socfpga/Kconfig"
 941
 942 source "arch/arm/mach-spear/Kconfig"
 943
 944 source "arch/arm/mach-sti/Kconfig"
 945
 946 source "arch/arm/mach-s3c24xx/Kconfig"
 947
 948 source "arch/arm/mach-s3c64xx/Kconfig"
 949
 950 source "arch/arm/mach-s5pv210/Kconfig"
 951
 952 source "arch/arm/mach-exynos/Kconfig"
 953 source "arch/arm/plat-samsung/Kconfig"
 954
 955 source "arch/arm/mach-shmobile/Kconfig"
 956
 957 source "arch/arm/mach-sunxi/Kconfig"
 958
 959 source "arch/arm/mach-prima2/Kconfig"
 960
 961 source "arch/arm/mach-tegra/Kconfig"
 962
 963 source "arch/arm/mach-u300/Kconfig"
 964
 965 source "arch/arm/mach-ux500/Kconfig"
 966
 967 source "arch/arm/mach-versatile/Kconfig"
 968
 969 source "arch/arm/mach-vexpress/Kconfig"
 970 source "arch/arm/plat-versatile/Kconfig"
 971
 972 source "arch/arm/mach-vt8500/Kconfig"
 973
 974 source "arch/arm/mach-w90x900/Kconfig"
 975
 976 source "arch/arm/mach-zynq/Kconfig"
 977
 978 # Definitions to make life easier
 979 config ARCH_ACORN
 980         bool
 981
 982 config PLAT_IOP
 983         bool
 984         select GENERIC_CLOCKEVENTS
 985
 986 config PLAT_ORION
 987         bool
 988         select CLKSRC_MMIO
 989         select COMMON_CLK
 990         select GENERIC_IRQ_CHIP
 991         select IRQ_DOMAIN
 992
 993 config PLAT_ORION_LEGACY
 994         bool
 995         select PLAT_ORION
 996
 997 config PLAT_PXA
 998         bool
 999
1000 config PLAT_VERSATILE
1001         bool
1002
1003 config ARM_TIMER_SP804
1004         bool
1005         select CLKSRC_MMIO
1006         select CLKSRC_OF if OF
1007
1008 source "arch/arm/firmware/Kconfig"
1009
1010 source arch/arm/mm/Kconfig
1011
1012 config IWMMXT
1013         bool "Enable iWMMXt support"
1014         depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
1015         default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
1016         help
1017           Enable support for iWMMXt context switching at run time if
1018           running on a CPU that supports it.
1019
1020 config MULTI_IRQ_HANDLER
1021         bool
1022         help
1023           Allow each machine to specify it's own IRQ handler at run time.
1024
1025 if !MMU
1026 source "arch/arm/Kconfig-nommu"
1027 endif
1028
1029 config PJ4B_ERRATA_4742
1030         bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
1031         depends on CPU_PJ4B && MACH_ARMADA_370
1032         default y
1033         help
1034           When coming out of either a Wait for Interrupt (WFI) or a Wait for
1035           Event (WFE) IDLE states, a specific timing sensitivity exists between
1036           the retiring WFI/WFE instructions and the newly issued subsequent
1037           instructions.  This sensitivity can result in a CPU hang scenario.
1038           Workaround:
1039           The software must insert either a Data Synchronization Barrier (DSB)
1040           or Data Memory Barrier (DMB) command immediately after the WFI/WFE
1041           instruction
1042
1043 config ARM_ERRATA_326103
1044         bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
1045         depends on CPU_V6
1046         help
1047           Executing a SWP instruction to read-only memory does not set bit 11
1048           of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
1049           treat the access as a read, preventing a COW from occurring and
1050           causing the faulting task to livelock.
1051
1052 config ARM_ERRATA_411920
1053         bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
1054         depends on CPU_V6 || CPU_V6K
1055         help
1056           Invalidation of the Instruction Cache operation can
1057           fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
1058           It does not affect the MPCore. This option enables the ARM Ltd.
1059           recommended workaround.
1060
1061 config ARM_ERRATA_430973
1062         bool "ARM errata: Stale prediction on replaced interworking branch"
1063         depends on CPU_V7
1064         help
1065           This option enables the workaround for the 430973 Cortex-A8
1066           (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
1067           interworking branch is replaced with another code sequence at the
1068           same virtual address, whether due to self-modifying code or virtual
1069           to physical address re-mapping, Cortex-A8 does not recover from the
1070           stale interworking branch prediction. This results in Cortex-A8
1071           executing the new code sequence in the incorrect ARM or Thumb state.
1072           The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
1073           and also flushes the branch target cache at every context switch.
1074           Note that setting specific bits in the ACTLR register may not be
1075           available in non-secure mode.
1076
1077 config ARM_ERRATA_458693
1078         bool "ARM errata: Processor deadlock when a false hazard is created"
1079         depends on CPU_V7
1080         depends on !ARCH_MULTIPLATFORM
1081         help
1082           This option enables the workaround for the 458693 Cortex-A8 (r2p0)
1083           erratum. For very specific sequences of memory operations, it is
1084           possible for a hazard condition intended for a cache line to instead
1085           be incorrectly associated with a different cache line. This false
1086           hazard might then cause a processor deadlock. The workaround enables
1087           the L1 caching of the NEON accesses and disables the PLD instruction
1088           in the ACTLR register. Note that setting specific bits in the ACTLR
1089           register may not be available in non-secure mode.
1090
1091 config ARM_ERRATA_460075
1092         bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1093         depends on CPU_V7
1094         depends on !ARCH_MULTIPLATFORM
1095         help
1096           This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1097           erratum. Any asynchronous access to the L2 cache may encounter a
1098           situation in which recent store transactions to the L2 cache are lost
1099           and overwritten with stale memory contents from external memory. The
1100           workaround disables the write-allocate mode for the L2 cache via the
1101           ACTLR register. Note that setting specific bits in the ACTLR register
1102           may not be available in non-secure mode.
1103
1104 config ARM_ERRATA_742230
1105         bool "ARM errata: DMB operation may be faulty"
1106         depends on CPU_V7 && SMP
1107         depends on !ARCH_MULTIPLATFORM
1108         help
1109           This option enables the workaround for the 742230 Cortex-A9
1110           (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1111           between two write operations may not ensure the correct visibility
1112           ordering of the two writes. This workaround sets a specific bit in
1113           the diagnostic register of the Cortex-A9 which causes the DMB
1114           instruction to behave as a DSB, ensuring the correct behaviour of
1115           the two writes.
1116
1117 config ARM_ERRATA_742231
1118         bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1119         depends on CPU_V7 && SMP
1120         depends on !ARCH_MULTIPLATFORM
1121         help
1122           This option enables the workaround for the 742231 Cortex-A9
1123           (r2p0..r2p2) erratum. Under certain conditions, specific to the
1124           Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1125           accessing some data located in the same cache line, may get corrupted
1126           data due to bad handling of the address hazard when the line gets
1127           replaced from one of the CPUs at the same time as another CPU is
1128           accessing it. This workaround sets specific bits in the diagnostic
1129           register of the Cortex-A9 which reduces the linefill issuing
1130           capabilities of the processor.
1131
1132 config ARM_ERRATA_643719
1133         bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1134         depends on CPU_V7 && SMP
1135         help
1136           This option enables the workaround for the 643719 Cortex-A9 (prior to
1137           r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1138           register returns zero when it should return one. The workaround
1139           corrects this value, ensuring cache maintenance operations which use
1140           it behave as intended and avoiding data corruption.
1141
1142 config ARM_ERRATA_720789
1143         bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1144         depends on CPU_V7
1145         help
1146           This option enables the workaround for the 720789 Cortex-A9 (prior to
1147           r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1148           broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1149           As a consequence of this erratum, some TLB entries which should be
1150           invalidated are not, resulting in an incoherency in the system page
1151           tables. The workaround changes the TLB flushing routines to invalidate
1152           entries regardless of the ASID.
1153
1154 config ARM_ERRATA_743622
1155         bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1156         depends on CPU_V7
1157         depends on !ARCH_MULTIPLATFORM
1158         help
1159           This option enables the workaround for the 743622 Cortex-A9
1160           (r2p*) erratum. Under very rare conditions, a faulty
1161           optimisation in the Cortex-A9 Store Buffer may lead to data
1162           corruption. This workaround sets a specific bit in the diagnostic
1163           register of the Cortex-A9 which disables the Store Buffer
1164           optimisation, preventing the defect from occurring. This has no
1165           visible impact on the overall performance or power consumption of the
1166           processor.
1167
1168 config ARM_ERRATA_751472
1169         bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1170         depends on CPU_V7
1171         depends on !ARCH_MULTIPLATFORM
1172         help
1173           This option enables the workaround for the 751472 Cortex-A9 (prior
1174           to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1175           completion of a following broadcasted operation if the second
1176           operation is received by a CPU before the ICIALLUIS has completed,
1177           potentially leading to corrupted entries in the cache or TLB.
1178
1179 config ARM_ERRATA_754322
1180         bool "ARM errata: possible faulty MMU translations following an ASID switch"
1181         depends on CPU_V7
1182         help
1183           This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1184           r3p*) erratum. A speculative memory access may cause a page table walk
1185           which starts prior to an ASID switch but completes afterwards. This
1186           can populate the micro-TLB with a stale entry which may be hit with
1187           the new ASID. This workaround places two dsb instructions in the mm
1188           switching code so that no page table walks can cross the ASID switch.
1189
1190 config ARM_ERRATA_754327
1191         bool "ARM errata: no automatic Store Buffer drain"
1192         depends on CPU_V7 && SMP
1193         help
1194           This option enables the workaround for the 754327 Cortex-A9 (prior to
1195           r2p0) erratum. The Store Buffer does not have any automatic draining
1196           mechanism and therefore a livelock may occur if an external agent
1197           continuously polls a memory location waiting to observe an update.
1198           This workaround defines cpu_relax() as smp_mb(), preventing correctly
1199           written polling loops from denying visibility of updates to memory.
1200
1201 config ARM_ERRATA_364296
1202         bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1203         depends on CPU_V6
1204         help
1205           This options enables the workaround for the 364296 ARM1136
1206           r0p2 erratum (possible cache data corruption with
1207           hit-under-miss enabled). It sets the undocumented bit 31 in
1208           the auxiliary control register and the FI bit in the control
1209           register, thus disabling hit-under-miss without putting the
1210           processor into full low interrupt latency mode. ARM11MPCore
1211           is not affected.
1212
1213 config ARM_ERRATA_764369
1214         bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1215         depends on CPU_V7 && SMP
1216         help
1217           This option enables the workaround for erratum 764369
1218           affecting Cortex-A9 MPCore with two or more processors (all
1219           current revisions). Under certain timing circumstances, a data
1220           cache line maintenance operation by MVA targeting an Inner
1221           Shareable memory region may fail to proceed up to either the
1222           Point of Coherency or to the Point of Unification of the
1223           system. This workaround adds a DSB instruction before the
1224           relevant cache maintenance functions and sets a specific bit
1225           in the diagnostic control register of the SCU.
1226
1227 config ARM_ERRATA_775420
1228        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1229        depends on CPU_V7
1230        help
1231          This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1232          r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1233          operation aborts with MMU exception, it might cause the processor
1234          to deadlock. This workaround puts DSB before executing ISB if
1235          an abort may occur on cache maintenance.
1236
1237 config ARM_ERRATA_798181
1238         bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1239         depends on CPU_V7 && SMP
1240         help
1241           On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1242           adequately shooting down all use of the old entries. This
1243           option enables the Linux kernel workaround for this erratum
1244           which sends an IPI to the CPUs that are running the same ASID
1245           as the one being invalidated.
1246
1247 config ARM_ERRATA_773022
1248         bool "ARM errata: incorrect instructions may be executed from loop buffer"
1249         depends on CPU_V7
1250         help
1251           This option enables the workaround for the 773022 Cortex-A15
1252           (up to r0p4) erratum. In certain rare sequences of code, the
1253           loop buffer may deliver incorrect instructions. This
1254           workaround disables the loop buffer to avoid the erratum.
1255
1256 endmenu
1257
1258 source "arch/arm/common/Kconfig"
1259
1260 menu "Bus support"
1261
1262 config ISA
1263         bool
1264         help
1265           Find out whether you have ISA slots on your motherboard.  ISA is the
1266           name of a bus system, i.e. the way the CPU talks to the other stuff
1267           inside your box.  Other bus systems are PCI, EISA, MicroChannel
1268           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
1269           newer boards don't support it.  If you have ISA, say Y, otherwise N.
1270
1271 # Select ISA DMA controller support
1272 config ISA_DMA
1273         bool
1274         select ISA_DMA_API
1275
1276 # Select ISA DMA interface
1277 config ISA_DMA_API
1278         bool
1279
1280 config PCI
1281         bool "PCI support" if MIGHT_HAVE_PCI
1282         help
1283           Find out whether you have a PCI motherboard. PCI is the name of a
1284           bus system, i.e. the way the CPU talks to the other stuff inside
1285           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1286           VESA. If you have PCI, say Y, otherwise N.
1287
1288 config PCI_DOMAINS
1289         bool
1290         depends on PCI
1291
1292 config PCI_DOMAINS_GENERIC
1293         def_bool PCI_DOMAINS
1294
1295 config PCI_NANOENGINE
1296         bool "BSE nanoEngine PCI support"
1297         depends on SA1100_NANOENGINE
1298         help
1299           Enable PCI on the BSE nanoEngine board.
1300
1301 config PCI_SYSCALL
1302         def_bool PCI
1303
1304 config PCI_HOST_ITE8152
1305         bool
1306         depends on PCI && MACH_ARMCORE
1307         default y
1308         select DMABOUNCE
1309
1310 source "drivers/pci/Kconfig"
1311 source "drivers/pci/pcie/Kconfig"
1312
1313 source "drivers/pcmcia/Kconfig"
1314
1315 endmenu
1316
1317 menu "Kernel Features"
1318
1319 config HAVE_SMP
1320         bool
1321         help
1322           This option should be selected by machines which have an SMP-
1323           capable CPU.
1324
1325           The only effect of this option is to make the SMP-related
1326           options available to the user for configuration.
1327
1328 config SMP
1329         bool "Symmetric Multi-Processing"
1330         depends on CPU_V6K || CPU_V7
1331         depends on GENERIC_CLOCKEVENTS
1332         depends on HAVE_SMP
1333         depends on MMU || ARM_MPU
1334         help
1335           This enables support for systems with more than one CPU. If you have
1336           a system with only one CPU, say N. If you have a system with more
1337           than one CPU, say Y.
1338
1339           If you say N here, the kernel will run on uni- and multiprocessor
1340           machines, but will use only one CPU of a multiprocessor machine. If
1341           you say Y here, the kernel will run on many, but not all,
1342           uniprocessor machines. On a uniprocessor machine, the kernel
1343           will run faster if you say N here.
1344
1345           See also <file:Documentation/x86/i386/IO-APIC.txt>,
1346           <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1347           <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1348
1349           If you don't know what to do here, say N.
1350
1351 config SMP_ON_UP
1352         bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
1353         depends on SMP && !XIP_KERNEL && MMU
1354         default y
1355         help
1356           SMP kernels contain instructions which fail on non-SMP processors.
1357           Enabling this option allows the kernel to modify itself to make
1358           these instructions safe.  Disabling it allows about 1K of space
1359           savings.
1360
1361           If you don't know what to do here, say Y.
1362
1363 config ARM_CPU_TOPOLOGY
1364         bool "Support cpu topology definition"
1365         depends on SMP && CPU_V7
1366         default y
1367         help
1368           Support ARM cpu topology definition. The MPIDR register defines
1369           affinity between processors which is then used to describe the cpu
1370           topology of an ARM System.
1371
1372 config SCHED_MC
1373         bool "Multi-core scheduler support"
1374         depends on ARM_CPU_TOPOLOGY
1375         help
1376           Multi-core scheduler support improves the CPU scheduler's decision
1377           making when dealing with multi-core CPU chips at a cost of slightly
1378           increased overhead in some places. If unsure say N here.
1379
1380 config SCHED_SMT
1381         bool "SMT scheduler support"
1382         depends on ARM_CPU_TOPOLOGY
1383         help
1384           Improves the CPU scheduler's decision making when dealing with
1385           MultiThreading at a cost of slightly increased overhead in some
1386           places. If unsure say N here.
1387
1388 config HAVE_ARM_SCU
1389         bool
1390         help
1391           This option enables support for the ARM system coherency unit
1392
1393 config HAVE_ARM_ARCH_TIMER
1394         bool "Architected timer support"
1395         depends on CPU_V7
1396         select ARM_ARCH_TIMER
1397         select GENERIC_CLOCKEVENTS
1398         help
1399           This option enables support for the ARM architected timer
1400
1401 config HAVE_ARM_TWD
1402         bool
1403         depends on SMP
1404         select CLKSRC_OF if OF
1405         help
1406           This options enables support for the ARM timer and watchdog unit
1407
1408 config MCPM
1409         bool "Multi-Cluster Power Management"
1410         depends on CPU_V7 && SMP
1411         help
1412           This option provides the common power management infrastructure
1413           for (multi-)cluster based systems, such as big.LITTLE based
1414           systems.
1415
1416 config MCPM_QUAD_CLUSTER
1417         bool
1418         depends on MCPM
1419         help
1420           To avoid wasting resources unnecessarily, MCPM only supports up
1421           to 2 clusters by default.
1422           Platforms with 3 or 4 clusters that use MCPM must select this
1423           option to allow the additional clusters to be managed.
1424
1425 config BIG_LITTLE
1426         bool "big.LITTLE support (Experimental)"
1427         depends on CPU_V7 && SMP
1428         select MCPM
1429         help
1430           This option enables support selections for the big.LITTLE
1431           system architecture.
1432
1433 config BL_SWITCHER
1434         bool "big.LITTLE switcher support"
1435         depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
1436         select ARM_CPU_SUSPEND
1437         select CPU_PM
1438         help
1439           The big.LITTLE "switcher" provides the core functionality to
1440           transparently handle transition between a cluster of A15's
1441           and a cluster of A7's in a big.LITTLE system.
1442
1443 config BL_SWITCHER_DUMMY_IF
1444         tristate "Simple big.LITTLE switcher user interface"
1445         depends on BL_SWITCHER && DEBUG_KERNEL
1446         help
1447           This is a simple and dummy char dev interface to control
1448           the big.LITTLE switcher core code.  It is meant for
1449           debugging purposes only.
1450
1451 choice
1452         prompt "Memory split"
1453         depends on MMU
1454         default VMSPLIT_3G
1455         help
1456           Select the desired split between kernel and user memory.
1457
1458           If you are not absolutely sure what you are doing, leave this
1459           option alone!
1460
1461         config VMSPLIT_3G
1462                 bool "3G/1G user/kernel split"
1463         config VMSPLIT_2G
1464                 bool "2G/2G user/kernel split"
1465         config VMSPLIT_1G
1466                 bool "1G/3G user/kernel split"
1467 endchoice
1468
1469 config PAGE_OFFSET
1470         hex
1471         default PHYS_OFFSET if !MMU
1472         default 0x40000000 if VMSPLIT_1G
1473         default 0x80000000 if VMSPLIT_2G
1474         default 0xC0000000
1475
1476 config NR_CPUS
1477         int "Maximum number of CPUs (2-32)"
1478         range 2 32
1479         depends on SMP
1480         default "4"
1481
1482 config HOTPLUG_CPU
1483         bool "Support for hot-pluggable CPUs"
1484         depends on SMP
1485         help
1486           Say Y here to experiment with turning CPUs off and on.  CPUs
1487           can be controlled through /sys/devices/system/cpu.
1488
1489 config ARM_PSCI
1490         bool "Support for the ARM Power State Coordination Interface (PSCI)"
1491         depends on CPU_V7
1492         help
1493           Say Y here if you want Linux to communicate with system firmware
1494           implementing the PSCI specification for CPU-centric power
1495           management operations described in ARM document number ARM DEN
1496           0022A ("Power State Coordination Interface System Software on
1497           ARM processors").
1498
1499 # The GPIO number here must be sorted by descending number. In case of
1500 # a multiplatform kernel, we just want the highest value required by the
1501 # selected platforms.
1502 config ARCH_NR_GPIO
1503         int
1504         default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
1505         default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1506                 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1507         default 416 if ARCH_SUNXI
1508         default 392 if ARCH_U8500
1509         default 352 if ARCH_VT8500
1510         default 288 if ARCH_ROCKCHIP
1511         default 264 if MACH_H4700
1512         default 0
1513         help
1514           Maximum number of GPIOs in the system.
1515
1516           If unsure, leave the default value.
1517
1518 source kernel/Kconfig.preempt
1519
1520 config HZ_FIXED
1521         int
1522         default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
1523                 ARCH_S5PV210 || ARCH_EXYNOS4
1524         default AT91_TIMER_HZ if ARCH_AT91
1525         default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
1526         default 0
1527
1528 choice
1529         depends on HZ_FIXED = 0
1530         prompt "Timer frequency"
1531
1532 config HZ_100
1533         bool "100 Hz"
1534
1535 config HZ_200
1536         bool "200 Hz"
1537
1538 config HZ_250
1539         bool "250 Hz"
1540
1541 config HZ_300
1542         bool "300 Hz"
1543
1544 config HZ_500
1545         bool "500 Hz"
1546
1547 config HZ_1000
1548         bool "1000 Hz"
1549
1550 endchoice
1551
1552 config HZ
1553         int
1554         default HZ_FIXED if HZ_FIXED != 0
1555         default 100 if HZ_100
1556         default 200 if HZ_200
1557         default 250 if HZ_250
1558         default 300 if HZ_300
1559         default 500 if HZ_500
1560         default 1000
1561
1562 config SCHED_HRTICK
1563         def_bool HIGH_RES_TIMERS
1564
1565 config THUMB2_KERNEL
1566         bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1567         depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1568         default y if CPU_THUMBONLY
1569         select AEABI
1570         select ARM_ASM_UNIFIED
1571         select ARM_UNWIND
1572         help
1573           By enabling this option, the kernel will be compiled in
1574           Thumb-2 mode. A compiler/assembler that understand the unified
1575           ARM-Thumb syntax is needed.
1576
1577           If unsure, say N.
1578
1579 config THUMB2_AVOID_R_ARM_THM_JUMP11
1580         bool "Work around buggy Thumb-2 short branch relocations in gas"
1581         depends on THUMB2_KERNEL && MODULES
1582         default y
1583         help
1584           Various binutils versions can resolve Thumb-2 branches to
1585           locally-defined, preemptible global symbols as short-range "b.n"
1586           branch instructions.
1587
1588           This is a problem, because there's no guarantee the final
1589           destination of the symbol, or any candidate locations for a
1590           trampoline, are within range of the branch.  For this reason, the
1591           kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1592           relocation in modules at all, and it makes little sense to add
1593           support.
1594
1595           The symptom is that the kernel fails with an "unsupported
1596           relocation" error when loading some modules.
1597
1598           Until fixed tools are available, passing
1599           -fno-optimize-sibling-calls to gcc should prevent gcc generating
1600           code which hits this problem, at the cost of a bit of extra runtime
1601           stack usage in some cases.
1602
1603           The problem is described in more detail at:
1604               https://bugs.launchpad.net/binutils-linaro/+bug/725126
1605
1606           Only Thumb-2 kernels are affected.
1607
1608           Unless you are sure your tools don't have this problem, say Y.
1609
1610 config ARM_ASM_UNIFIED
1611         bool
1612
1613 config AEABI
1614         bool "Use the ARM EABI to compile the kernel"
1615         help
1616           This option allows for the kernel to be compiled using the latest
1617           ARM ABI (aka EABI).  This is only useful if you are using a user
1618           space environment that is also compiled with EABI.
1619
1620           Since there are major incompatibilities between the legacy ABI and
1621           EABI, especially with regard to structure member alignment, this
1622           option also changes the kernel syscall calling convention to
1623           disambiguate both ABIs and allow for backward compatibility support
1624           (selected with CONFIG_OABI_COMPAT).
1625
1626           To use this you need GCC version 4.0.0 or later.
1627
1628 config OABI_COMPAT
1629         bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1630         depends on AEABI && !THUMB2_KERNEL
1631         help
1632           This option preserves the old syscall interface along with the
1633           new (ARM EABI) one. It also provides a compatibility layer to
1634           intercept syscalls that have structure arguments which layout
1635           in memory differs between the legacy ABI and the new ARM EABI
1636           (only for non "thumb" binaries). This option adds a tiny
1637           overhead to all syscalls and produces a slightly larger kernel.
1638
1639           The seccomp filter system will not be available when this is
1640           selected, since there is no way yet to sensibly distinguish
1641           between calling conventions during filtering.
1642
1643           If you know you'll be using only pure EABI user space then you
1644           can say N here. If this option is not selected and you attempt
1645           to execute a legacy ABI binary then the result will be
1646           UNPREDICTABLE (in fact it can be predicted that it won't work
1647           at all). If in doubt say N.
1648
1649 config ARCH_HAS_HOLES_MEMORYMODEL
1650         bool
1651
1652 config ARCH_SPARSEMEM_ENABLE
1653         bool
1654
1655 config ARCH_SPARSEMEM_DEFAULT
1656         def_bool ARCH_SPARSEMEM_ENABLE
1657
1658 config ARCH_SELECT_MEMORY_MODEL
1659         def_bool ARCH_SPARSEMEM_ENABLE
1660
1661 config HAVE_ARCH_PFN_VALID
1662         def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1663
1664 config HAVE_GENERIC_RCU_GUP
1665         def_bool y
1666         depends on ARM_LPAE
1667
1668 config HIGHMEM
1669         bool "High Memory Support"
1670         depends on MMU
1671         help
1672           The address space of ARM processors is only 4 Gigabytes large
1673           and it has to accommodate user address space, kernel address
1674           space as well as some memory mapped IO. That means that, if you
1675           have a large amount of physical memory and/or IO, not all of the
1676           memory can be "permanently mapped" by the kernel. The physical
1677           memory that is not permanently mapped is called "high memory".
1678
1679           Depending on the selected kernel/user memory split, minimum
1680           vmalloc space and actual amount of RAM, you may not need this
1681           option which should result in a slightly faster kernel.
1682
1683           If unsure, say n.
1684
1685 config HIGHPTE
1686         bool "Allocate 2nd-level pagetables from highmem"
1687         depends on HIGHMEM
1688
1689 config HW_PERF_EVENTS
1690         bool "Enable hardware performance counter support for perf events"
1691         depends on PERF_EVENTS
1692         default y
1693         help
1694           Enable hardware performance counter support for perf events. If
1695           disabled, perf events will use software events only.
1696
1697 config SYS_SUPPORTS_HUGETLBFS
1698        def_bool y
1699        depends on ARM_LPAE
1700
1701 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1702        def_bool y
1703        depends on ARM_LPAE
1704
1705 config ARCH_WANT_GENERAL_HUGETLB
1706         def_bool y
1707
1708 source "mm/Kconfig"
1709
1710 config FORCE_MAX_ZONEORDER
1711         int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
1712         range 11 64 if ARCH_SHMOBILE_LEGACY
1713         default "12" if SOC_AM33XX
1714         default "9" if SA1111 || ARCH_EFM32
1715         default "11"
1716         help
1717           The kernel memory allocator divides physically contiguous memory
1718           blocks into "zones", where each zone is a power of two number of
1719           pages.  This option selects the largest power of two that the kernel
1720           keeps in the memory allocator.  If you need to allocate very large
1721           blocks of physically contiguous memory, then you may need to
1722           increase this value.
1723
1724           This config option is actually maximum order plus one. For example,
1725           a value of 11 means that the largest free memory block is 2^10 pages.
1726
1727 config ALIGNMENT_TRAP
1728         bool
1729         depends on CPU_CP15_MMU
1730         default y if !ARCH_EBSA110
1731         select HAVE_PROC_CPU if PROC_FS
1732         help
1733           ARM processors cannot fetch/store information which is not
1734           naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1735           address divisible by 4. On 32-bit ARM processors, these non-aligned
1736           fetch/store instructions will be emulated in software if you say
1737           here, which has a severe performance impact. This is necessary for
1738           correct operation of some network protocols. With an IP-only
1739           configuration it is safe to say N, otherwise say Y.
1740
1741 config UACCESS_WITH_MEMCPY
1742         bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1743         depends on MMU
1744         default y if CPU_FEROCEON
1745         help
1746           Implement faster copy_to_user and clear_user methods for CPU
1747           cores where a 8-word STM instruction give significantly higher
1748           memory write throughput than a sequence of individual 32bit stores.
1749
1750           A possible side effect is a slight increase in scheduling latency
1751           between threads sharing the same address space if they invoke
1752           such copy operations with large buffers.
1753
1754           However, if the CPU data cache is using a write-allocate mode,
1755           this option is unlikely to provide any performance gain.
1756
1757 config SECCOMP
1758         bool
1759         prompt "Enable seccomp to safely compute untrusted bytecode"
1760         ---help---
1761           This kernel feature is useful for number crunching applications
1762           that may need to compute untrusted bytecode during their
1763           execution. By using pipes or other transports made available to
1764           the process as file descriptors supporting the read/write
1765           syscalls, it's possible to isolate those applications in
1766           their own address space using seccomp. Once seccomp is
1767           enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1768           and the task is only allowed to execute a few safe syscalls
1769           defined by each seccomp mode.
1770
1771 config SWIOTLB
1772         def_bool y
1773
1774 config IOMMU_HELPER
1775         def_bool SWIOTLB
1776
1777 config XEN_DOM0
1778         def_bool y
1779         depends on XEN
1780
1781 config XEN
1782         bool "Xen guest support on ARM"
1783         depends on ARM && AEABI && OF
1784         depends on CPU_V7 && !CPU_V6
1785         depends on !GENERIC_ATOMIC64
1786         depends on MMU
1787         select ARCH_DMA_ADDR_T_64BIT
1788         select ARM_PSCI
1789         select SWIOTLB_XEN
1790         help
1791           Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1792
1793 endmenu
1794
1795 menu "Boot options"
1796
1797 config USE_OF
1798         bool "Flattened Device Tree support"
1799         select IRQ_DOMAIN
1800         select OF
1801         select OF_EARLY_FLATTREE
1802         select OF_RESERVED_MEM
1803         help
1804           Include support for flattened device tree machine descriptions.
1805
1806 config ATAGS
1807         bool "Support for the traditional ATAGS boot data passing" if USE_OF
1808         default y
1809         help
1810           This is the traditional way of passing data to the kernel at boot
1811           time. If you are solely relying on the flattened device tree (or
1812           the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1813           to remove ATAGS support from your kernel binary.  If unsure,
1814           leave this to y.
1815
1816 config DEPRECATED_PARAM_STRUCT
1817         bool "Provide old way to pass kernel parameters"
1818         depends on ATAGS
1819         help
1820           This was deprecated in 2001 and announced to live on for 5 years.
1821           Some old boot loaders still use this way.
1822
1823 # Compressed boot loader in ROM.  Yes, we really want to ask about
1824 # TEXT and BSS so we preserve their values in the config files.
1825 config ZBOOT_ROM_TEXT
1826         hex "Compressed ROM boot loader base address"
1827         default "0"
1828         help
1829           The physical address at which the ROM-able zImage is to be
1830           placed in the target.  Platforms which normally make use of
1831           ROM-able zImage formats normally set this to a suitable
1832           value in their defconfig file.
1833
1834           If ZBOOT_ROM is not enabled, this has no effect.
1835
1836 config ZBOOT_ROM_BSS
1837         hex "Compressed ROM boot loader BSS address"
1838         default "0"
1839         help
1840           The base address of an area of read/write memory in the target
1841           for the ROM-able zImage which must be available while the
1842           decompressor is running. It must be large enough to hold the
1843           entire decompressed kernel plus an additional 128 KiB.
1844           Platforms which normally make use of ROM-able zImage formats
1845           normally set this to a suitable value in their defconfig file.
1846
1847           If ZBOOT_ROM is not enabled, this has no effect.
1848
1849 config ZBOOT_ROM
1850         bool "Compressed boot loader in ROM/flash"
1851         depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1852         depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1853         help
1854           Say Y here if you intend to execute your compressed kernel image
1855           (zImage) directly from ROM or flash.  If unsure, say N.
1856
1857 choice
1858         prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
1859         depends on ZBOOT_ROM && ARCH_SH7372
1860         default ZBOOT_ROM_NONE
1861         help
1862           Include experimental SD/MMC loading code in the ROM-able zImage.
1863           With this enabled it is possible to write the ROM-able zImage
1864           kernel image to an MMC or SD card and boot the kernel straight
1865           from the reset vector. At reset the processor Mask ROM will load
1866           the first part of the ROM-able zImage which in turn loads the
1867           rest the kernel image to RAM.
1868
1869 config ZBOOT_ROM_NONE
1870         bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
1871         help
1872           Do not load image from SD or MMC
1873
1874 config ZBOOT_ROM_MMCIF
1875         bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
1876         help
1877           Load image from MMCIF hardware block.
1878
1879 config ZBOOT_ROM_SH_MOBILE_SDHI
1880         bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
1881         help
1882           Load image from SDHI hardware block
1883
1884 endchoice
1885
1886 config ARM_APPENDED_DTB
1887         bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1888         depends on OF
1889         help
1890           With this option, the boot code will look for a device tree binary
1891           (DTB) appended to zImage
1892           (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1893
1894           This is meant as a backward compatibility convenience for those
1895           systems with a bootloader that can't be upgraded to accommodate
1896           the documented boot protocol using a device tree.
1897
1898           Beware that there is very little in terms of protection against
1899           this option being confused by leftover garbage in memory that might
1900           look like a DTB header after a reboot if no actual DTB is appended
1901           to zImage.  Do not leave this option active in a production kernel
1902           if you don't intend to always append a DTB.  Proper passing of the
1903           location into r2 of a bootloader provided DTB is always preferable
1904           to this option.
1905
1906 config ARM_ATAG_DTB_COMPAT
1907         bool "Supplement the appended DTB with traditional ATAG information"
1908         depends on ARM_APPENDED_DTB
1909         help
1910           Some old bootloaders can't be updated to a DTB capable one, yet
1911           they provide ATAGs with memory configuration, the ramdisk address,
1912           the kernel cmdline string, etc.  Such information is dynamically
1913           provided by the bootloader and can't always be stored in a static
1914           DTB.  To allow a device tree enabled kernel to be used with such
1915           bootloaders, this option allows zImage to extract the information
1916           from the ATAG list and store it at run time into the appended DTB.
1917
1918 choice
1919         prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1920         default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1921
1922 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1923         bool "Use bootloader kernel arguments if available"
1924         help
1925           Uses the command-line options passed by the boot loader instead of
1926           the device tree bootargs property. If the boot loader doesn't provide
1927           any, the device tree bootargs property will be used.
1928
1929 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1930         bool "Extend with bootloader kernel arguments"
1931         help
1932           The command-line arguments provided by the boot loader will be
1933           appended to the the device tree bootargs property.
1934
1935 endchoice
1936
1937 config CMDLINE
1938         string "Default kernel command string"
1939         default ""
1940         help
1941           On some architectures (EBSA110 and CATS), there is currently no way
1942           for the boot loader to pass arguments to the kernel. For these
1943           architectures, you should supply some command-line options at build
1944           time by entering them here. As a minimum, you should specify the
1945           memory size and the root device (e.g., mem=64M root=/dev/nfs).
1946
1947 choice
1948         prompt "Kernel command line type" if CMDLINE != ""
1949         default CMDLINE_FROM_BOOTLOADER
1950         depends on ATAGS
1951
1952 config CMDLINE_FROM_BOOTLOADER
1953         bool "Use bootloader kernel arguments if available"
1954         help
1955           Uses the command-line options passed by the boot loader. If
1956           the boot loader doesn't provide any, the default kernel command
1957           string provided in CMDLINE will be used.
1958
1959 config CMDLINE_EXTEND
1960         bool "Extend bootloader kernel arguments"
1961         help
1962           The command-line arguments provided by the boot loader will be
1963           appended to the default kernel command string.
1964
1965 config CMDLINE_FORCE
1966         bool "Always use the default kernel command string"
1967         help
1968           Always use the default kernel command string, even if the boot
1969           loader passes other arguments to the kernel.
1970           This is useful if you cannot or don't want to change the
1971           command-line options your boot loader passes to the kernel.
1972 endchoice
1973
1974 config XIP_KERNEL
1975         bool "Kernel Execute-In-Place from ROM"
1976         depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
1977         help
1978           Execute-In-Place allows the kernel to run from non-volatile storage
1979           directly addressable by the CPU, such as NOR flash. This saves RAM
1980           space since the text section of the kernel is not loaded from flash
1981           to RAM.  Read-write sections, such as the data section and stack,
1982           are still copied to RAM.  The XIP kernel is not compressed since
1983           it has to run directly from flash, so it will take more space to
1984           store it.  The flash address used to link the kernel object files,
1985           and for storing it, is configuration dependent. Therefore, if you
1986           say Y here, you must know the proper physical address where to
1987           store the kernel image depending on your own flash memory usage.
1988
1989           Also note that the make target becomes "make xipImage" rather than
1990           "make zImage" or "make Image".  The final kernel binary to put in
1991           ROM memory will be arch/arm/boot/xipImage.
1992
1993           If unsure, say N.
1994
1995 config XIP_PHYS_ADDR
1996         hex "XIP Kernel Physical Location"
1997         depends on XIP_KERNEL
1998         default "0x00080000"
1999         help
2000           This is the physical address in your flash memory the kernel will
2001           be linked for and stored to.  This address is dependent on your
2002           own flash usage.
2003
2004 config KEXEC
2005         bool "Kexec system call (EXPERIMENTAL)"
2006         depends on (!SMP || PM_SLEEP_SMP)
2007         help
2008           kexec is a system call that implements the ability to shutdown your
2009           current kernel, and to start another kernel.  It is like a reboot
2010           but it is independent of the system firmware.   And like a reboot
2011           you can start any kernel with it, not just Linux.
2012
2013           It is an ongoing process to be certain the hardware in a machine
2014           is properly shutdown, so do not be surprised if this code does not
2015           initially work for you.
2016
2017 config ATAGS_PROC
2018         bool "Export atags in procfs"
2019         depends on ATAGS && KEXEC
2020         default y
2021         help
2022           Should the atags used to boot the kernel be exported in an "atags"
2023           file in procfs. Useful with kexec.
2024
2025 config CRASH_DUMP
2026         bool "Build kdump crash kernel (EXPERIMENTAL)"
2027         help
2028           Generate crash dump after being started by kexec. This should
2029           be normally only set in special crash dump kernels which are
2030           loaded in the main kernel with kexec-tools into a specially
2031           reserved region and then later executed after a crash by
2032           kdump/kexec. The crash dump kernel must be compiled to a
2033           memory address not used by the main kernel
2034
2035           For more details see Documentation/kdump/kdump.txt
2036
2037 config AUTO_ZRELADDR
2038         bool "Auto calculation of the decompressed kernel image address"
2039         help
2040           ZRELADDR is the physical address where the decompressed kernel
2041           image will be placed. If AUTO_ZRELADDR is selected, the address
2042           will be determined at run-time by masking the current IP with
2043           0xf8000000. This assumes the zImage being placed in the first 128MB
2044           from start of memory.
2045
2046 endmenu
2047
2048 menu "CPU Power Management"
2049
2050 source "drivers/cpufreq/Kconfig"
2051
2052 source "drivers/cpuidle/Kconfig"
2053
2054 endmenu
2055
2056 menu "Floating point emulation"
2057
2058 comment "At least one emulation must be selected"
2059
2060 config FPE_NWFPE
2061         bool "NWFPE math emulation"
2062         depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2063         ---help---
2064           Say Y to include the NWFPE floating point emulator in the kernel.
2065           This is necessary to run most binaries. Linux does not currently
2066           support floating point hardware so you need to say Y here even if
2067           your machine has an FPA or floating point co-processor podule.
2068
2069           You may say N here if you are going to load the Acorn FPEmulator
2070           early in the bootup.
2071
2072 config FPE_NWFPE_XP
2073         bool "Support extended precision"
2074         depends on FPE_NWFPE
2075         help
2076           Say Y to include 80-bit support in the kernel floating-point
2077           emulator.  Otherwise, only 32 and 64-bit support is compiled in.
2078           Note that gcc does not generate 80-bit operations by default,
2079           so in most cases this option only enlarges the size of the
2080           floating point emulator without any good reason.
2081
2082           You almost surely want to say N here.
2083
2084 config FPE_FASTFPE
2085         bool "FastFPE math emulation (EXPERIMENTAL)"
2086         depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2087         ---help---
2088           Say Y here to include the FAST floating point emulator in the kernel.
2089           This is an experimental much faster emulator which now also has full
2090           precision for the mantissa.  It does not support any exceptions.
2091           It is very simple, and approximately 3-6 times faster than NWFPE.
2092
2093           It should be sufficient for most programs.  It may be not suitable
2094           for scientific calculations, but you have to check this for yourself.
2095           If you do not feel you need a faster FP emulation you should better
2096           choose NWFPE.
2097
2098 config VFP
2099         bool "VFP-format floating point maths"
2100         depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2101         help
2102           Say Y to include VFP support code in the kernel. This is needed
2103           if your hardware includes a VFP unit.
2104
2105           Please see <file:Documentation/arm/VFP/release-notes.txt> for
2106           release notes and additional status information.
2107
2108           Say N if your target does not have VFP hardware.
2109
2110 config VFPv3
2111         bool
2112         depends on VFP
2113         default y if CPU_V7
2114
2115 config NEON
2116         bool "Advanced SIMD (NEON) Extension support"
2117         depends on VFPv3 && CPU_V7
2118         help
2119           Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2120           Extension.
2121
2122 config KERNEL_MODE_NEON
2123         bool "Support for NEON in kernel mode"
2124         depends on NEON && AEABI
2125         help
2126           Say Y to include support for NEON in kernel mode.
2127
2128 endmenu
2129
2130 menu "Userspace binary formats"
2131
2132 source "fs/Kconfig.binfmt"
2133
2134 config ARTHUR
2135         tristate "RISC OS personality"
2136         depends on !AEABI
2137         help
2138           Say Y here to include the kernel code necessary if you want to run
2139           Acorn RISC OS/Arthur binaries under Linux. This code is still very
2140           experimental; if this sounds frightening, say N and sleep in peace.
2141           You can also say M here to compile this support as a module (which
2142           will be called arthur).
2143
2144 endmenu
2145
2146 menu "Power management options"
2147
2148 source "kernel/power/Kconfig"
2149
2150 config ARCH_SUSPEND_POSSIBLE
2151         depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2152                 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2153         def_bool y
2154
2155 config ARM_CPU_SUSPEND
2156         def_bool PM_SLEEP
2157
2158 config ARCH_HIBERNATION_POSSIBLE
2159         bool
2160         depends on MMU
2161         default y if ARCH_SUSPEND_POSSIBLE
2162
2163 endmenu
2164
2165 source "net/Kconfig"
2166
2167 source "drivers/Kconfig"
2168
2169 source "fs/Kconfig"
2170
2171 source "arch/arm/Kconfig.debug"
2172
2173 source "security/Kconfig"
2174
2175 source "crypto/Kconfig"
2176
2177 source "lib/Kconfig"
2178
2179 source "arch/arm/kvm/Kconfig"