arch/arm/boot/dts/am335x-evm.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11
  12 / {
  13         model = "TI AM335x EVM";
  14         compatible = "ti,am335x-evm", "ti,am33xx";
  15
  16         cpus {
  17                 cpu@0 {
  18                         cpu0-supply = <&vdd1_reg>;
  19                 };
  20         };
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x10000000>; /* 256 MB */
  25         };
  26
  27         vbat: fixedregulator@0 {
  28                 compatible = "regulator-fixed";
  29                 regulator-name = "vbat";
  30                 regulator-min-microvolt = <5000000>;
  31                 regulator-max-microvolt = <5000000>;
  32                 regulator-boot-on;
  33         };
  34
  35         lis3_reg: fixedregulator@1 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "lis3_reg";
  38                 regulator-boot-on;
  39         };
  40
  41         matrix_keypad: matrix_keypad@0 {
  42                 compatible = "gpio-matrix-keypad";
  43                 debounce-delay-ms = <5>;
  44                 col-scan-delay-us = <2>;
  45
  46                 row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH         /* Bank1, pin25 */
  47                              &gpio1 26 GPIO_ACTIVE_HIGH         /* Bank1, pin26 */
  48                              &gpio1 27 GPIO_ACTIVE_HIGH>;       /* Bank1, pin27 */
  49
  50                 col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH         /* Bank1, pin21 */
  51                              &gpio1 22 GPIO_ACTIVE_HIGH>;       /* Bank1, pin22 */
  52
  53                 linux,keymap = <0x0000008b      /* MENU */
  54                                 0x0100009e      /* BACK */
  55                                 0x02000069      /* LEFT */
  56                                 0x0001006a      /* RIGHT */
  57                                 0x0101001c      /* ENTER */
  58                                 0x0201006c>;    /* DOWN */
  59         };
  60
  61         gpio_keys: volume_keys@0 {
  62                 compatible = "gpio-keys";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 autorepeat;
  66
  67                 switch@9 {
  68                         label = "volume-up";
  69                         linux,code = <115>;
  70                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  71                         gpio-key,wakeup;
  72                 };
  73
  74                 switch@10 {
  75                         label = "volume-down";
  76                         linux,code = <114>;
  77                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  78                         gpio-key,wakeup;
  79                 };
  80         };
  81
  82         backlight {
  83                 compatible = "pwm-backlight";
  84                 pwms = <&ecap0 0 50000 0>;
  85                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  86                 default-brightness-level = <8>;
  87         };
  88
  89         panel {
  90                 compatible = "ti,tilcdc,panel";
  91                 status = "okay";
  92                 pinctrl-names = "default";
  93                 pinctrl-0 = <&lcd_pins_s0>;
  94                 panel-info {
  95                         ac-bias           = <255>;
  96                         ac-bias-intrpt    = <0>;
  97                         dma-burst-sz      = <16>;
  98                         bpp               = <32>;
  99                         fdd               = <0x80>;
 100                         sync-edge         = <0>;
 101                         sync-ctrl         = <1>;
 102                         raster-order      = <0>;
 103                         fifo-th           = <0>;
 104                 };
 105
 106                 display-timings {
 107                         800x480p62 {
 108                                 clock-frequency = <30000000>;
 109                                 hactive = <800>;
 110                                 vactive = <480>;
 111                                 hfront-porch = <39>;
 112                                 hback-porch = <39>;
 113                                 hsync-len = <47>;
 114                                 vback-porch = <29>;
 115                                 vfront-porch = <13>;
 116                                 vsync-len = <2>;
 117                                 hsync-active = <1>;
 118                                 vsync-active = <1>;
 119                         };
 120                 };
 121         };
 122
 123         sound {
 124                 compatible = "ti,da830-evm-audio";
 125                 ti,model = "AM335x-EVM";
 126                 ti,audio-codec = <&tlv320aic3106>;
 127                 ti,mcasp-controller = <&mcasp1>;
 128                 ti,codec-clock-rate = <12000000>;
 129                 ti,audio-routing =
 130                         "Headphone Jack",       "HPLOUT",
 131                         "Headphone Jack",       "HPROUT",
 132                         "LINE1L",               "Line In",
 133                         "LINE1R",               "Line In";
 134         };
 135 };
 136
 137 &am33xx_pinmux {
 138         pinctrl-names = "default";
 139         pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 140
 141         matrix_keypad_s0: matrix_keypad_s0 {
 142                 pinctrl-single,pins = <
 143                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
 144                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a6.gpio1_22 */
 145                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a9.gpio1_25 */
 146                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a10.gpio1_26 */
 147                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a11.gpio1_27 */
 148                 >;
 149         };
 150
 151         volume_keys_s0: volume_keys_s0 {
 152                 pinctrl-single,pins = <
 153                         0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* spi0_sclk.gpio0_2 */
 154                         0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* spi0_d0.gpio0_3 */
 155                 >;
 156         };
 157
 158         i2c0_pins: pinmux_i2c0_pins {
 159                 pinctrl-single,pins = <
 160                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 161                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 162                 >;
 163         };
 164
 165         i2c1_pins: pinmux_i2c1_pins {
 166                 pinctrl-single,pins = <
 167                         0x158 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_d1.i2c1_sda */
 168                         0x15c (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_cs0.i2c1_scl */
 169                 >;
 170         };
 171
 172         uart0_pins: pinmux_uart0_pins {
 173                 pinctrl-single,pins = <
 174                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 175                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
 176                 >;
 177         };
 178
 179         clkout2_pin: pinmux_clkout2_pin {
 180                 pinctrl-single,pins = <
 181                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
 182                 >;
 183         };
 184
 185         nandflash_pins_s0: nandflash_pins_s0 {
 186                 pinctrl-single,pins = <
 187                         0x0 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad0.gpmc_ad0 */
 188                         0x4 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad1.gpmc_ad1 */
 189                         0x8 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad2.gpmc_ad2 */
 190                         0xc (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad3.gpmc_ad3 */
 191                         0x10 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
 192                         0x14 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
 193                         0x18 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
 194                         0x1c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
 195                         0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
 196                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_wpn.gpio0_30 */
 197                         0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0  */
 198                         0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
 199                         0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
 200                         0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
 201                         0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_be0n_cle.gpmc_be0n_cle */
 202                 >;
 203         };
 204
 205         ecap0_pins: backlight_pins {
 206                 pinctrl-single,pins = <
 207                         0x164 0x0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 208                 >;
 209         };
 210
 211         cpsw_default: cpsw_default {
 212                 pinctrl-single,pins = <
 213                         /* Slave 1 */
 214                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 215                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 216                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
 217                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
 218                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 219                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 220                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
 221                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rgmii1_rclk */
 222                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd3.rgmii1_rd3 */
 223                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd2.rgmii1_rd2 */
 224                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 225                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 226                 >;
 227         };
 228
 229         cpsw_sleep: cpsw_sleep {
 230                 pinctrl-single,pins = <
 231                         /* Slave 1 reset value */
 232                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 233                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 234                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 235                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 236                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 237                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 238                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 239                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 240                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 241                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 242                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 243                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 244                 >;
 245         };
 246
 247         davinci_mdio_default: davinci_mdio_default {
 248                 pinctrl-single,pins = <
 249                         /* MDIO */
 250                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 251                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 252                 >;
 253         };
 254
 255         davinci_mdio_sleep: davinci_mdio_sleep {
 256                 pinctrl-single,pins = <
 257                         /* MDIO reset value */
 258                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 259                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 260                 >;
 261         };
 262
 263         mmc1_pins: pinmux_mmc1_pins {
 264                 pinctrl-single,pins = <
 265                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 266                 >;
 267         };
 268
 269         lcd_pins_s0: lcd_pins_s0 {
 270                 pinctrl-single,pins = <
 271                         0x20 0x01       /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
 272                         0x24 0x01       /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
 273                         0x28 0x01       /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
 274                         0x2c 0x01       /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
 275                         0x30 0x01       /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
 276                         0x34 0x01       /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
 277                         0x38 0x01       /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
 278                         0x3c 0x01       /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
 279                         0xa0 0x00       /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
 280                         0xa4 0x00       /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
 281                         0xa8 0x00       /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
 282                         0xac 0x00       /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
 283                         0xb0 0x00       /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
 284                         0xb4 0x00       /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
 285                         0xb8 0x00       /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
 286                         0xbc 0x00       /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
 287                         0xc0 0x00       /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
 288                         0xc4 0x00       /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
 289                         0xc8 0x00       /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
 290                         0xcc 0x00       /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
 291                         0xd0 0x00       /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
 292                         0xd4 0x00       /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
 293                         0xd8 0x00       /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
 294                         0xdc 0x00       /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
 295                         0xe0 0x00       /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
 296                         0xe4 0x00       /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
 297                         0xe8 0x00       /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
 298                         0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
 299                 >;
 300         };
 301
 302         am335x_evm_audio_pins: am335x_evm_audio_pins {
 303                 pinctrl-single,pins = <
 304                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 305                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 306                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 307                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 308                 >;
 309         };
 310 };
 311
 312 &uart0 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&uart0_pins>;
 315
 316         status = "okay";
 317 };
 318
 319 &i2c0 {
 320         pinctrl-names = "default";
 321         pinctrl-0 = <&i2c0_pins>;
 322
 323         status = "okay";
 324         clock-frequency = <400000>;
 325
 326         tps: tps@2d {
 327                 reg = <0x2d>;
 328         };
 329 };
 330
 331 &usb {
 332         status = "okay";
 333
 334         control@44e10620 {
 335                 status = "okay";
 336         };
 337
 338         usb-phy@47401300 {
 339                 status = "okay";
 340         };
 341
 342         usb-phy@47401b00 {
 343                 status = "okay";
 344         };
 345
 346         usb@47401000 {
 347                 status = "okay";
 348         };
 349
 350         usb@47401800 {
 351                 status = "okay";
 352                 dr_mode = "host";
 353         };
 354
 355         dma-controller@47402000  {
 356                 status = "okay";
 357         };
 358 };
 359
 360 &i2c1 {
 361         pinctrl-names = "default";
 362         pinctrl-0 = <&i2c1_pins>;
 363
 364         status = "okay";
 365         clock-frequency = <100000>;
 366
 367         lis331dlh: lis331dlh@18 {
 368                 compatible = "st,lis331dlh", "st,lis3lv02d";
 369                 reg = <0x18>;
 370                 Vdd-supply = <&lis3_reg>;
 371                 Vdd_IO-supply = <&lis3_reg>;
 372
 373                 st,click-single-x;
 374                 st,click-single-y;
 375                 st,click-single-z;
 376                 st,click-thresh-x = <10>;
 377                 st,click-thresh-y = <10>;
 378                 st,click-thresh-z = <10>;
 379                 st,irq1-click;
 380                 st,irq2-click;
 381                 st,wakeup-x-lo;
 382                 st,wakeup-x-hi;
 383                 st,wakeup-y-lo;
 384                 st,wakeup-y-hi;
 385                 st,wakeup-z-lo;
 386                 st,wakeup-z-hi;
 387                 st,min-limit-x = <120>;
 388                 st,min-limit-y = <120>;
 389                 st,min-limit-z = <140>;
 390                 st,max-limit-x = <550>;
 391                 st,max-limit-y = <550>;
 392                 st,max-limit-z = <750>;
 393         };
 394
 395         tsl2550: tsl2550@39 {
 396                 compatible = "taos,tsl2550";
 397                 reg = <0x39>;
 398         };
 399
 400         tmp275: tmp275@48 {
 401                 compatible = "ti,tmp275";
 402                 reg = <0x48>;
 403         };
 404
 405         tlv320aic3106: tlv320aic3106@1b {
 406                 compatible = "ti,tlv320aic3106";
 407                 reg = <0x1b>;
 408                 status = "okay";
 409
 410                 /* Regulators */
 411                 AVDD-supply = <&vaux2_reg>;
 412                 IOVDD-supply = <&vaux2_reg>;
 413                 DRVDD-supply = <&vaux2_reg>;
 414                 DVDD-supply = <&vbat>;
 415         };
 416 };
 417
 418 &lcdc {
 419         status = "okay";
 420 };
 421
 422 &elm {
 423         status = "okay";
 424 };
 425
 426 &epwmss0 {
 427         status = "okay";
 428
 429         ecap0: ecap@48300100 {
 430                 status = "okay";
 431                 pinctrl-names = "default";
 432                 pinctrl-0 = <&ecap0_pins>;
 433         };
 434 };
 435
 436 &gpmc {
 437         status = "okay";
 438         pinctrl-names = "default";
 439         pinctrl-0 = <&nandflash_pins_s0>;
 440         ranges = <0 0 0x08000000 0x10000000>;   /* CS0: NAND */
 441         nand@0,0 {
 442                 reg = <0 0 0>; /* CS0, offset 0 */
 443                 ti,nand-ecc-opt = "bch8";
 444                 ti,elm-id = <&elm>;
 445                 nand-bus-width = <8>;
 446                 gpmc,device-width = <1>;
 447                 gpmc,sync-clk-ps = <0>;
 448                 gpmc,cs-on-ns = <0>;
 449                 gpmc,cs-rd-off-ns = <44>;
 450                 gpmc,cs-wr-off-ns = <44>;
 451                 gpmc,adv-on-ns = <6>;
 452                 gpmc,adv-rd-off-ns = <34>;
 453                 gpmc,adv-wr-off-ns = <44>;
 454                 gpmc,we-on-ns = <0>;
 455                 gpmc,we-off-ns = <40>;
 456                 gpmc,oe-on-ns = <0>;
 457                 gpmc,oe-off-ns = <54>;
 458                 gpmc,access-ns = <64>;
 459                 gpmc,rd-cycle-ns = <82>;
 460                 gpmc,wr-cycle-ns = <82>;
 461                 gpmc,wait-on-read = "true";
 462                 gpmc,wait-on-write = "true";
 463                 gpmc,bus-turnaround-ns = <0>;
 464                 gpmc,cycle2cycle-delay-ns = <0>;
 465                 gpmc,clk-activation-ns = <0>;
 466                 gpmc,wait-monitoring-ns = <0>;
 467                 gpmc,wr-access-ns = <40>;
 468                 gpmc,wr-data-mux-bus-ns = <0>;
 469                 /* MTD partition table */
 470                 /* All SPL-* partitions are sized to minimal length
 471                  * which can be independently programmable. For
 472                  * NAND flash this is equal to size of erase-block */
 473                 #address-cells = <1>;
 474                 #size-cells = <1>;
 475                 partition@0 {
 476                         label = "NAND.SPL";
 477                         reg = <0x00000000 0x000020000>;
 478                 };
 479                 partition@1 {
 480                         label = "NAND.SPL.backup1";
 481                         reg = <0x00020000 0x00020000>;
 482                 };
 483                 partition@2 {
 484                         label = "NAND.SPL.backup2";
 485                         reg = <0x00040000 0x00020000>;
 486                 };
 487                 partition@3 {
 488                         label = "NAND.SPL.backup3";
 489                         reg = <0x00060000 0x00020000>;
 490                 };
 491                 partition@4 {
 492                         label = "NAND.u-boot-spl";
 493                         reg = <0x00080000 0x00040000>;
 494                 };
 495                 partition@5 {
 496                         label = "NAND.u-boot";
 497                         reg = <0x000C0000 0x00100000>;
 498                 };
 499                 partition@6 {
 500                         label = "NAND.u-boot-env";
 501                         reg = <0x001C0000 0x00020000>;
 502                 };
 503                 partition@7 {
 504                         label = "NAND.u-boot-env.backup1";
 505                         reg = <0x001E0000 0x00020000>;
 506                 };
 507                 partition@8 {
 508                         label = "NAND.kernel";
 509                         reg = <0x00200000 0x00800000>;
 510                 };
 511                 partition@9 {
 512                         label = "NAND.file-system";
 513                         reg = <0x00A00000 0x0F600000>;
 514                 };
 515         };
 516 };
 517
 518 #include "tps65910.dtsi"
 519
 520 &mcasp1 {
 521                 pinctrl-names = "default";
 522                 pinctrl-0 = <&am335x_evm_audio_pins>;
 523
 524                 status = "okay";
 525
 526                 op-mode = <0>;          /* MCASP_IIS_MODE */
 527                 tdm-slots = <2>;
 528                 /* 4 serializers */
 529                 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 530                         0 0 1 2
 531                 >;
 532                 tx-num-evt = <1>;
 533                 rx-num-evt = <1>;
 534 };
 535
 536 &tps {
 537         vcc1-supply = <&vbat>;
 538         vcc2-supply = <&vbat>;
 539         vcc3-supply = <&vbat>;
 540         vcc4-supply = <&vbat>;
 541         vcc5-supply = <&vbat>;
 542         vcc6-supply = <&vbat>;
 543         vcc7-supply = <&vbat>;
 544         vccio-supply = <&vbat>;
 545
 546         regulators {
 547                 vrtc_reg: regulator@0 {
 548                         regulator-always-on;
 549                 };
 550
 551                 vio_reg: regulator@1 {
 552                         regulator-always-on;
 553                 };
 554
 555                 vdd1_reg: regulator@2 {
 556                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 557                         regulator-name = "vdd_mpu";
 558                         regulator-min-microvolt = <912500>;
 559                         regulator-max-microvolt = <1312500>;
 560                         regulator-boot-on;
 561                         regulator-always-on;
 562                 };
 563
 564                 vdd2_reg: regulator@3 {
 565                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 566                         regulator-name = "vdd_core";
 567                         regulator-min-microvolt = <912500>;
 568                         regulator-max-microvolt = <1150000>;
 569                         regulator-boot-on;
 570                         regulator-always-on;
 571                 };
 572
 573                 vdd3_reg: regulator@4 {
 574                         regulator-always-on;
 575                 };
 576
 577                 vdig1_reg: regulator@5 {
 578                         regulator-always-on;
 579                 };
 580
 581                 vdig2_reg: regulator@6 {
 582                         regulator-always-on;
 583                 };
 584
 585                 vpll_reg: regulator@7 {
 586                         regulator-always-on;
 587                 };
 588
 589                 vdac_reg: regulator@8 {
 590                         regulator-always-on;
 591                 };
 592
 593                 vaux1_reg: regulator@9 {
 594                         regulator-always-on;
 595                 };
 596
 597                 vaux2_reg: regulator@10 {
 598                         regulator-always-on;
 599                 };
 600
 601                 vaux33_reg: regulator@11 {
 602                         regulator-always-on;
 603                 };
 604
 605                 vmmc_reg: regulator@12 {
 606                         regulator-min-microvolt = <1800000>;
 607                         regulator-max-microvolt = <3300000>;
 608                         regulator-always-on;
 609                 };
 610         };
 611 };
 612
 613 &mac {
 614         pinctrl-names = "default", "sleep";
 615         pinctrl-0 = <&cpsw_default>;
 616         pinctrl-1 = <&cpsw_sleep>;
 617 };
 618
 619 &davinci_mdio {
 620         pinctrl-names = "default", "sleep";
 621         pinctrl-0 = <&davinci_mdio_default>;
 622         pinctrl-1 = <&davinci_mdio_sleep>;
 623 };
 624
 625 &cpsw_emac0 {
 626         phy_id = <&davinci_mdio>, <0>;
 627         phy-mode = "rgmii-txid";
 628 };
 629
 630 &cpsw_emac1 {
 631         phy_id = <&davinci_mdio>, <1>;
 632         phy-mode = "rgmii-txid";
 633 };
 634
 635 &tscadc {
 636         status = "okay";
 637         tsc {
 638                 ti,wires = <4>;
 639                 ti,x-plate-resistance = <200>;
 640                 ti,coordinate-readouts = <5>;
 641                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 642         };
 643
 644         adc {
 645                 ti,adc-channels = <4 5 6 7>;
 646         };
 647 };
 648
 649 &mmc1 {
 650         status = "okay";
 651         vmmc-supply = <&vmmc_reg>;
 652         bus-width = <4>;
 653         pinctrl-names = "default";
 654         pinctrl-0 = <&mmc1_pins>;
 655         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 656 };
 657
 658 &sham {
 659         status = "okay";
 660 };
 661
 662 &aes {
 663         status = "okay";
 664 };