arch/arm/boot/dts/at91sam9n12.dtsi

   1 /*
   2  * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
   3  *
   4  *  Copyright (C) 2012 Atmel,
   5  *                2012 Hong Xu <hong.xu@atmel.com>
   6  *
   7  * Licensed under GPLv2 or later.
   8  */
   9
  10 /include/ "skeleton.dtsi"
  11
  12 / {
  13         model = "Atmel AT91SAM9N12 SoC";
  14         compatible = "atmel,at91sam9n12";
  15         interrupt-parent = <&aic>;
  16
  17         aliases {
  18                 serial0 = &dbgu;
  19                 serial1 = &usart0;
  20                 serial2 = &usart1;
  21                 serial3 = &usart2;
  22                 serial4 = &usart3;
  23                 gpio0 = &pioA;
  24                 gpio1 = &pioB;
  25                 gpio2 = &pioC;
  26                 gpio3 = &pioD;
  27                 tcb0 = &tcb0;
  28                 tcb1 = &tcb1;
  29                 i2c0 = &i2c0;
  30                 i2c1 = &i2c1;
  31                 ssc0 = &ssc0;
  32         };
  33         cpus {
  34                 cpu@0 {
  35                         compatible = "arm,arm926ejs";
  36                 };
  37         };
  38
  39         memory {
  40                 reg = <0x20000000 0x10000000>;
  41         };
  42
  43         ahb {
  44                 compatible = "simple-bus";
  45                 #address-cells = <1>;
  46                 #size-cells = <1>;
  47                 ranges;
  48
  49                 apb {
  50                         compatible = "simple-bus";
  51                         #address-cells = <1>;
  52                         #size-cells = <1>;
  53                         ranges;
  54
  55                         aic: interrupt-controller@fffff000 {
  56                                 #interrupt-cells = <3>;
  57                                 compatible = "atmel,at91rm9200-aic";
  58                                 interrupt-controller;
  59                                 reg = <0xfffff000 0x200>;
  60                         };
  61
  62                         ramc0: ramc@ffffe800 {
  63                                 compatible = "atmel,at91sam9g45-ddramc";
  64                                 reg = <0xffffe800 0x200>;
  65                         };
  66
  67                         pmc: pmc@fffffc00 {
  68                                 compatible = "atmel,at91rm9200-pmc";
  69                                 reg = <0xfffffc00 0x100>;
  70                         };
  71
  72                         rstc@fffffe00 {
  73                                 compatible = "atmel,at91sam9g45-rstc";
  74                                 reg = <0xfffffe00 0x10>;
  75                         };
  76
  77                         pit: timer@fffffe30 {
  78                                 compatible = "atmel,at91sam9260-pit";
  79                                 reg = <0xfffffe30 0xf>;
  80                                 interrupts = <1 4 7>;
  81                         };
  82
  83                         shdwc@fffffe10 {
  84                                 compatible = "atmel,at91sam9x5-shdwc";
  85                                 reg = <0xfffffe10 0x10>;
  86                         };
  87
  88                         mmc0: mmc@f0008000 {
  89                                 compatible = "atmel,hsmci";
  90                                 reg = <0xf0008000 0x600>;
  91                                 interrupts = <12 4 0>;
  92                                 dmas = <&dma 1 0>;
  93                                 dma-names = "rxtx";
  94                                 #address-cells = <1>;
  95                                 #size-cells = <0>;
  96                                 status = "disabled";
  97                         };
  98
  99                         tcb0: timer@f8008000 {
 100                                 compatible = "atmel,at91sam9x5-tcb";
 101                                 reg = <0xf8008000 0x100>;
 102                                 interrupts = <17 4 0>;
 103                         };
 104
 105                         tcb1: timer@f800c000 {
 106                                 compatible = "atmel,at91sam9x5-tcb";
 107                                 reg = <0xf800c000 0x100>;
 108                                 interrupts = <17 4 0>;
 109                         };
 110
 111                         dma: dma-controller@ffffec00 {
 112                                 compatible = "atmel,at91sam9g45-dma";
 113                                 reg = <0xffffec00 0x200>;
 114                                 interrupts = <20 4 0>;
 115                                 #dma-cells = <2>;
 116                         };
 117
 118                         pinctrl@fffff400 {
 119                                 #address-cells = <1>;
 120                                 #size-cells = <1>;
 121                                 compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 122                                 ranges = <0xfffff400 0xfffff400 0x800>;
 123
 124                                 atmel,mux-mask = <
 125                                       /*    A         B          C     */
 126                                        0xffffffff 0xffe07983 0x00000000  /* pioA */
 127                                        0x00040000 0x00047e0f 0x00000000  /* pioB */
 128                                        0xfdffffff 0x07c00000 0xb83fffff  /* pioC */
 129                                        0x003fffff 0x003f8000 0x00000000  /* pioD */
 130                                       >;
 131
 132                                 /* shared pinctrl settings */
 133                                 dbgu {
 134                                         pinctrl_dbgu: dbgu-0 {
 135                                                 atmel,pins =
 136                                                         <0 9 0x1 0x0    /* PA9 periph A */
 137                                                          0 10 0x1 0x1>; /* PA10 periph with pullup */
 138                                         };
 139                                 };
 140
 141                                 usart0 {
 142                                         pinctrl_usart0: usart0-0 {
 143                                                 atmel,pins =
 144                                                         <0 1 0x1 0x1    /* PA1 periph A with pullup */
 145                                                          0 0 0x1 0x0>;  /* PA0 periph A */
 146                                         };
 147
 148                                         pinctrl_usart0_rts: usart0_rts-0 {
 149                                                 atmel,pins =
 150                                                         <0 2 0x1 0x0>;  /* PA2 periph A */
 151                                         };
 152
 153                                         pinctrl_usart0_cts: usart0_cts-0 {
 154                                                 atmel,pins =
 155                                                         <0 3 0x1 0x0>;  /* PA3 periph A */
 156                                         };
 157                                 };
 158
 159                                 usart1 {
 160                                         pinctrl_usart1: usart1-0 {
 161                                                 atmel,pins =
 162                                                         <0 6 0x1 0x1    /* PA6 periph A with pullup */
 163                                                          0 5 0x1 0x0>;  /* PA5 periph A */
 164                                         };
 165                                 };
 166
 167                                 usart2 {
 168                                         pinctrl_usart2: usart2-0 {
 169                                                 atmel,pins =
 170                                                         <0 8 0x1 0x1    /* PA8 periph A with pullup */
 171                                                          0 7 0x1 0x0>;  /* PA7 periph A */
 172                                         };
 173
 174                                         pinctrl_usart2_rts: usart2_rts-0 {
 175                                                 atmel,pins =
 176                                                         <1 0 0x2 0x0>;  /* PB0 periph B */
 177                                         };
 178
 179                                         pinctrl_usart2_cts: usart2_cts-0 {
 180                                                 atmel,pins =
 181                                                         <1 1 0x2 0x0>;  /* PB1 periph B */
 182                                         };
 183                                 };
 184
 185                                 usart3 {
 186                                         pinctrl_usart3: usart3-0 {
 187                                                 atmel,pins =
 188                                                         <2 23 0x2 0x1   /* PC23 periph B with pullup */
 189                                                          2 22 0x2 0x0>; /* PC22 periph B */
 190                                         };
 191
 192                                         pinctrl_usart3_rts: usart3_rts-0 {
 193                                                 atmel,pins =
 194                                                         <2 24 0x2 0x0>; /* PC24 periph B */
 195                                         };
 196
 197                                         pinctrl_usart3_cts: usart3_cts-0 {
 198                                                 atmel,pins =
 199                                                         <2 25 0x2 0x0>; /* PC25 periph B */
 200                                         };
 201                                 };
 202
 203                                 uart0 {
 204                                         pinctrl_uart0: uart0-0 {
 205                                                 atmel,pins =
 206                                                         <2 9 0x3 0x1    /* PC9 periph C with pullup */
 207                                                          2 8 0x3 0x0>;  /* PC8 periph C */
 208                                         };
 209                                 };
 210
 211                                 uart1 {
 212                                         pinctrl_uart1: uart1-0 {
 213                                                 atmel,pins =
 214                                                         <2 16 0x3 0x1   /* PC17 periph C with pullup */
 215                                                          2 17 0x3 0x0>; /* PC16 periph C */
 216                                         };
 217                                 };
 218
 219                                 nand {
 220                                         pinctrl_nand: nand-0 {
 221                                                 atmel,pins =
 222                                                         <3 5 0x0 0x1    /* PD5 gpio RDY pin pull_up*/
 223                                                          3 4 0x0 0x1>;  /* PD4 gpio enable pin pull_up */
 224                                         };
 225                                 };
 226
 227                                 mmc0 {
 228                                         pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 {
 229                                                 atmel,pins =
 230                                                         <0 17 0x1 0x0   /* PA17 periph A */
 231                                                          0 16 0x1 0x1   /* PA16 periph A with pullup */
 232                                                          0 15 0x1 0x1>; /* PA15 periph A with pullup */
 233                                         };
 234
 235                                         pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
 236                                                 atmel,pins =
 237                                                         <0 18 0x1 0x1   /* PA18 periph A with pullup */
 238                                                          0 19 0x1 0x1   /* PA19 periph A with pullup */
 239                                                          0 20 0x1 0x1>; /* PA20 periph A with pullup */
 240                                         };
 241
 242                                         pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 {
 243                                                 atmel,pins =
 244                                                         <0 11 0x2 0x1   /* PA11 periph B with pullup */
 245                                                          0 12 0x2 0x1   /* PA12 periph B with pullup */
 246                                                          0 13 0x2 0x1   /* PA13 periph B with pullup */
 247                                                          0 14 0x2 0x1>; /* PA14 periph B with pullup */
 248                                         };
 249                                 };
 250
 251                                 ssc0 {
 252                                         pinctrl_ssc0_tx: ssc0_tx-0 {
 253                                                 atmel,pins =
 254                                                         <0 24 0x2 0x0   /* PA24 periph B */
 255                                                          0 25 0x2 0x0   /* PA25 periph B */
 256                                                          0 26 0x2 0x0>; /* PA26 periph B */
 257                                         };
 258
 259                                         pinctrl_ssc0_rx: ssc0_rx-0 {
 260                                                 atmel,pins =
 261                                                         <0 27 0x2 0x0   /* PA27 periph B */
 262                                                          0 28 0x2 0x0   /* PA28 periph B */
 263                                                          0 29 0x2 0x0>; /* PA29 periph B */
 264                                         };
 265                                 };
 266
 267                                 spi0 {
 268                                         pinctrl_spi0: spi0-0 {
 269                                                 atmel,pins =
 270                                                         <0 11 0x1 0x0   /* PA11 periph A SPI0_MISO pin */
 271                                                          0 12 0x1 0x0   /* PA12 periph A SPI0_MOSI pin */
 272                                                          0 13 0x1 0x0>; /* PA13 periph A SPI0_SPCK pin */
 273                                         };
 274                                 };
 275
 276                                 spi1 {
 277                                         pinctrl_spi1: spi1-0 {
 278                                                 atmel,pins =
 279                                                         <0 21 0x2 0x0   /* PA21 periph B SPI1_MISO pin */
 280                                                          0 22 0x2 0x0   /* PA22 periph B SPI1_MOSI pin */
 281                                                          0 23 0x2 0x0>; /* PA23 periph B SPI1_SPCK pin */
 282                                         };
 283                                 };
 284
 285                                 pioA: gpio@fffff400 {
 286                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 287                                         reg = <0xfffff400 0x200>;
 288                                         interrupts = <2 4 1>;
 289                                         #gpio-cells = <2>;
 290                                         gpio-controller;
 291                                         interrupt-controller;
 292                                         #interrupt-cells = <2>;
 293                                 };
 294
 295                                 pioB: gpio@fffff600 {
 296                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 297                                         reg = <0xfffff600 0x200>;
 298                                         interrupts = <2 4 1>;
 299                                         #gpio-cells = <2>;
 300                                         gpio-controller;
 301                                         interrupt-controller;
 302                                         #interrupt-cells = <2>;
 303                                 };
 304
 305                                 pioC: gpio@fffff800 {
 306                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 307                                         reg = <0xfffff800 0x200>;
 308                                         interrupts = <3 4 1>;
 309                                         #gpio-cells = <2>;
 310                                         gpio-controller;
 311                                         interrupt-controller;
 312                                         #interrupt-cells = <2>;
 313                                 };
 314
 315                                 pioD: gpio@fffffa00 {
 316                                         compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 317                                         reg = <0xfffffa00 0x200>;
 318                                         interrupts = <3 4 1>;
 319                                         #gpio-cells = <2>;
 320                                         gpio-controller;
 321                                         interrupt-controller;
 322                                         #interrupt-cells = <2>;
 323                                 };
 324                         };
 325
 326                         dbgu: serial@fffff200 {
 327                                 compatible = "atmel,at91sam9260-usart";
 328                                 reg = <0xfffff200 0x200>;
 329                                 interrupts = <1 4 7>;
 330                                 pinctrl-names = "default";
 331                                 pinctrl-0 = <&pinctrl_dbgu>;
 332                                 status = "disabled";
 333                         };
 334
 335                         ssc0: ssc@f0010000 {
 336                                 compatible = "atmel,at91sam9g45-ssc";
 337                                 reg = <0xf0010000 0x4000>;
 338                                 interrupts = <28 4 5>;
 339                                 pinctrl-names = "default";
 340                                 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 341                                 status = "disabled";
 342                         };
 343
 344                         usart0: serial@f801c000 {
 345                                 compatible = "atmel,at91sam9260-usart";
 346                                 reg = <0xf801c000 0x4000>;
 347                                 interrupts = <5 4 5>;
 348                                 pinctrl-names = "default";
 349                                 pinctrl-0 = <&pinctrl_usart0>;
 350                                 status = "disabled";
 351                         };
 352
 353                         usart1: serial@f8020000 {
 354                                 compatible = "atmel,at91sam9260-usart";
 355                                 reg = <0xf8020000 0x4000>;
 356                                 interrupts = <6 4 5>;
 357                                 pinctrl-names = "default";
 358                                 pinctrl-0 = <&pinctrl_usart1>;
 359                                 status = "disabled";
 360                         };
 361
 362                         usart2: serial@f8024000 {
 363                                 compatible = "atmel,at91sam9260-usart";
 364                                 reg = <0xf8024000 0x4000>;
 365                                 interrupts = <7 4 5>;
 366                                 pinctrl-names = "default";
 367                                 pinctrl-0 = <&pinctrl_usart2>;
 368                                 status = "disabled";
 369                         };
 370
 371                         usart3: serial@f8028000 {
 372                                 compatible = "atmel,at91sam9260-usart";
 373                                 reg = <0xf8028000 0x4000>;
 374                                 interrupts = <8 4 5>;
 375                                 pinctrl-names = "default";
 376                                 pinctrl-0 = <&pinctrl_usart3>;
 377                                 status = "disabled";
 378                         };
 379
 380                         i2c0: i2c@f8010000 {
 381                                 compatible = "atmel,at91sam9x5-i2c";
 382                                 reg = <0xf8010000 0x100>;
 383                                 interrupts = <9 4 6>;
 384                                 dmas = <&dma 1 13>,
 385                                        <&dma 1 14>;
 386                                 dma-names = "tx", "rx";
 387                                 #address-cells = <1>;
 388                                 #size-cells = <0>;
 389                                 status = "disabled";
 390                         };
 391
 392                         i2c1: i2c@f8014000 {
 393                                 compatible = "atmel,at91sam9x5-i2c";
 394                                 reg = <0xf8014000 0x100>;
 395                                 interrupts = <10 4 6>;
 396                                 dmas = <&dma 1 15>,
 397                                        <&dma 1 16>;
 398                                 dma-names = "tx", "rx";
 399                                 #address-cells = <1>;
 400                                 #size-cells = <0>;
 401                                 status = "disabled";
 402                         };
 403
 404                         spi0: spi@f0000000 {
 405                                 #address-cells = <1>;
 406                                 #size-cells = <0>;
 407                                 compatible = "atmel,at91rm9200-spi";
 408                                 reg = <0xf0000000 0x100>;
 409                                 interrupts = <13 4 3>;
 410                                 pinctrl-names = "default";
 411                                 pinctrl-0 = <&pinctrl_spi0>;
 412                                 status = "disabled";
 413                         };
 414
 415                         spi1: spi@f0004000 {
 416                                 #address-cells = <1>;
 417                                 #size-cells = <0>;
 418                                 compatible = "atmel,at91rm9200-spi";
 419                                 reg = <0xf0004000 0x100>;
 420                                 interrupts = <14 4 3>;
 421                                 pinctrl-names = "default";
 422                                 pinctrl-0 = <&pinctrl_spi1>;
 423                                 status = "disabled";
 424                         };
 425                 };
 426
 427                 nand0: nand@40000000 {
 428                         compatible = "atmel,at91rm9200-nand";
 429                         #address-cells = <1>;
 430                         #size-cells = <1>;
 431                         reg = < 0x40000000 0x10000000
 432                                 0xffffe000 0x00000600
 433                                 0xffffe600 0x00000200
 434                                 0x00108000 0x00018000
 435                                >;
 436                         atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 437                         atmel,nand-addr-offset = <21>;
 438                         atmel,nand-cmd-offset = <22>;
 439                         pinctrl-names = "default";
 440                         pinctrl-0 = <&pinctrl_nand>;
 441                         gpios = <&pioD 5 0
 442                                  &pioD 4 0
 443                                  0
 444                                 >;
 445                         status = "disabled";
 446                 };
 447
 448                 usb0: ohci@00500000 {
 449                         compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 450                         reg = <0x00500000 0x00100000>;
 451                         interrupts = <22 4 2>;
 452                         status = "disabled";
 453                 };
 454         };
 455
 456         i2c@0 {
 457                 compatible = "i2c-gpio";
 458                 gpios = <&pioA 30 0 /* sda */
 459                          &pioA 31 0 /* scl */
 460                         >;
 461                 i2c-gpio,sda-open-drain;
 462                 i2c-gpio,scl-open-drain;
 463                 i2c-gpio,delay-us = <2>;        /* ~100 kHz */
 464                 #address-cells = <1>;
 465                 #size-cells = <0>;
 466                 status = "disabled";
 467         };
 468 };