arch/arm/boot/dts/bcm5301x.dtsi

   1 /*
   2  * Broadcom BCM470X / BCM5301X ARM platform code.
   3  * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
   4  * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
   5  *
   6  * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
   7  *
   8  * Licensed under the GNU/GPL. See COPYING for details.
   9  */
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/input/input.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15 #include "skeleton.dtsi"
  16
  17 / {
  18         interrupt-parent = <&gic>;
  19
  20         chipcommonA {
  21                 compatible = "simple-bus";
  22                 ranges = <0x00000000 0x18000000 0x00001000>;
  23                 #address-cells = <1>;
  24                 #size-cells = <1>;
  25
  26                 uart0: serial@0300 {
  27                         compatible = "ns16550";
  28                         reg = <0x0300 0x100>;
  29                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
  30                         clock-frequency = <100000000>;
  31                         status = "disabled";
  32                 };
  33
  34                 uart1: serial@0400 {
  35                         compatible = "ns16550";
  36                         reg = <0x0400 0x100>;
  37                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
  38                         clock-frequency = <100000000>;
  39                         status = "disabled";
  40                 };
  41         };
  42
  43         mpcore {
  44                 compatible = "simple-bus";
  45                 ranges = <0x00000000 0x19020000 0x00003000>;
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48
  49                 scu@0000 {
  50                         compatible = "arm,cortex-a9-scu";
  51                         reg = <0x0000 0x100>;
  52                 };
  53
  54                 timer@0200 {
  55                         compatible = "arm,cortex-a9-global-timer";
  56                         reg = <0x0200 0x100>;
  57                         interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
  58                         clocks = <&clk_periph>;
  59                 };
  60
  61                 local-timer@0600 {
  62                         compatible = "arm,cortex-a9-twd-timer";
  63                         reg = <0x0600 0x100>;
  64                         interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
  65                         clocks = <&clk_periph>;
  66                 };
  67
  68                 gic: interrupt-controller@1000 {
  69                         compatible = "arm,cortex-a9-gic";
  70                         #interrupt-cells = <3>;
  71                         #address-cells = <0>;
  72                         interrupt-controller;
  73                         reg = <0x1000 0x1000>,
  74                               <0x0100 0x100>;
  75                 };
  76
  77                 L2: cache-controller@2000 {
  78                         compatible = "arm,pl310-cache";
  79                         reg = <0x2000 0x1000>;
  80                         cache-unified;
  81                         cache-level = <2>;
  82                 };
  83         };
  84
  85         clocks {
  86                 #address-cells = <1>;
  87                 #size-cells = <0>;
  88
  89                 /* As long as we do not have a real clock driver us this
  90                  * fixed clock */
  91                 clk_periph: periph {
  92                         compatible = "fixed-clock";
  93                         #clock-cells = <0>;
  94                         clock-frequency = <400000000>;
  95                 };
  96         };
  97
  98         axi@18000000 {
  99                 compatible = "brcm,bus-axi";
 100                 reg = <0x18000000 0x1000>;
 101                 ranges = <0x00000000 0x18000000 0x00100000>;
 102                 #address-cells = <1>;
 103                 #size-cells = <1>;
 104
 105                 #interrupt-cells = <1>;
 106                 interrupt-map-mask = <0x000fffff 0xffff>;
 107                 interrupt-map =
 108                         /* ChipCommon */
 109                         <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 110
 111                         /* PCIe Controller 0 */
 112                         <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 113                         <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
 114                         <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
 115                         <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
 116                         <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 117                         <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 118
 119                         /* PCIe Controller 1 */
 120                         <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
 121                         <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
 122                         <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
 123                         <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 124                         <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
 125                         <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 126
 127                         /* PCIe Controller 2 */
 128                         <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 129                         <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 130                         <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
 131                         <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 132                         <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
 133                         <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 134
 135                         /* USB 2.0 Controller */
 136                         <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
 137
 138                         /* USB 3.0 Controller */
 139                         <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
 140
 141                         /* Ethernet Controller 0 */
 142                         <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 143
 144                         /* Ethernet Controller 1 */
 145                         <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 146
 147                         /* Ethernet Controller 2 */
 148                         <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
 149
 150                         /* Ethernet Controller 3 */
 151                         <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 152
 153                         /* NAND Controller */
 154                         <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
 155                         <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 156                         <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 157                         <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 158                         <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 159                         <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 160                         <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 161                         <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 162
 163                 chipcommon: chipcommon@0 {
 164                         reg = <0x00000000 0x1000>;
 165
 166                         gpio-controller;
 167                         #gpio-cells = <2>;
 168                 };
 169         };
 170
 171         nand: nand@18028000 {
 172                 compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 173                 reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
 174                 reg-names = "nand", "iproc-idm", "iproc-ext";
 175                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 176
 177                 #address-cells = <1>;
 178                 #size-cells = <0>;
 179
 180                 brcm,nand-has-wp;
 181         };
 182 };