arch/arm/boot/dts/dra7-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "dra74x.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include <dt-bindings/clk/ti-dra7-atl.h>
  13 #include <dt-bindings/input/input.h>
  14
  15 / {
  16         model = "TI DRA742";
  17         compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
  18
  19         memory {
  20                 device_type = "memory";
  21                 reg = <0x80000000 0x60000000>; /* 1536 MB */
  22         };
  23
  24         evm_3v3_sd: fixedregulator-sd {
  25                 compatible = "regulator-fixed";
  26                 regulator-name = "evm_3v3_sd";
  27                 regulator-min-microvolt = <3300000>;
  28                 regulator-max-microvolt = <3300000>;
  29                 enable-active-high;
  30                 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
  31         };
  32
  33         evm_3v3_sw: fixedregulator-evm_3v3_sw {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "evm_3v3_sw";
  36                 regulator-min-microvolt = <3300000>;
  37                 regulator-max-microvolt = <3300000>;
  38         };
  39
  40         aic_dvdd: fixedregulator-aic_dvdd {
  41                 /* TPS77018DBVT */
  42                 compatible = "regulator-fixed";
  43                 regulator-name = "aic_dvdd";
  44                 vin-supply = <&evm_3v3_sw>;
  45                 regulator-min-microvolt = <1800000>;
  46                 regulator-max-microvolt = <1800000>;
  47         };
  48
  49         extcon_usb1: extcon_usb1 {
  50                 compatible = "linux,extcon-usb-gpio";
  51                 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
  52         };
  53
  54         extcon_usb2: extcon_usb2 {
  55                 compatible = "linux,extcon-usb-gpio";
  56                 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
  57         };
  58
  59         vtt_fixed: fixedregulator-vtt {
  60                 compatible = "regulator-fixed";
  61                 regulator-name = "vtt_fixed";
  62                 regulator-min-microvolt = <1350000>;
  63                 regulator-max-microvolt = <1350000>;
  64                 regulator-always-on;
  65                 regulator-boot-on;
  66                 enable-active-high;
  67                 gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
  68         };
  69
  70         sound0: sound@0 {
  71                 compatible = "simple-audio-card";
  72                 simple-audio-card,name = "DRA7xx-EVM";
  73                 simple-audio-card,widgets =
  74                         "Headphone", "Headphone Jack",
  75                         "Line", "Line Out",
  76                         "Microphone", "Mic Jack",
  77                         "Line", "Line In";
  78                 simple-audio-card,routing =
  79                         "Headphone Jack",       "HPLOUT",
  80                         "Headphone Jack",       "HPROUT",
  81                         "Line Out",             "LLOUT",
  82                         "Line Out",             "RLOUT",
  83                         "MIC3L",                "Mic Jack",
  84                         "MIC3R",                "Mic Jack",
  85                         "Mic Jack",             "Mic Bias",
  86                         "LINE1L",               "Line In",
  87                         "LINE1R",               "Line In";
  88                 simple-audio-card,format = "dsp_b";
  89                 simple-audio-card,bitclock-master = <&sound0_master>;
  90                 simple-audio-card,frame-master = <&sound0_master>;
  91                 simple-audio-card,bitclock-inversion;
  92
  93                 sound0_master: simple-audio-card,cpu {
  94                         sound-dai = <&mcasp3>;
  95                         system-clock-frequency = <5644800>;
  96                 };
  97
  98                 simple-audio-card,codec {
  99                         sound-dai = <&tlv320aic3106>;
 100                         clocks = <&atl_clkin2_ck>;
 101                 };
 102         };
 103
 104         leds {
 105                 compatible = "gpio-leds";
 106                 led@0 {
 107                         label = "dra7:usr1";
 108                         gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
 109                         default-state = "off";
 110                 };
 111
 112                 led@1 {
 113                         label = "dra7:usr2";
 114                         gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
 115                         default-state = "off";
 116                 };
 117
 118                 led@2 {
 119                         label = "dra7:usr3";
 120                         gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
 121                         default-state = "off";
 122                 };
 123
 124                 led@3 {
 125                         label = "dra7:usr4";
 126                         gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
 127                         default-state = "off";
 128                 };
 129         };
 130
 131         gpio_keys {
 132                 compatible = "gpio-keys";
 133                 #address-cells = <1>;
 134                 #size-cells = <0>;
 135                 autorepeat;
 136
 137                 USER1 {
 138                         label = "btnUser1";
 139                         linux,code = <BTN_0>;
 140                         gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
 141                 };
 142
 143                 USER2 {
 144                         label = "btnUser2";
 145                         linux,code = <BTN_1>;
 146                         gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
 147                 };
 148         };
 149 };
 150
 151 &dra7_pmx_core {
 152         pinctrl-names = "default";
 153         pinctrl-0 = <&vtt_pin>;
 154
 155         vtt_pin: pinmux_vtt_pin {
 156                 pinctrl-single,pins = <
 157                         DRA7XX_CORE_IOPAD(0x37b4, PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
 158                 >;
 159         };
 160
 161         i2c1_pins: pinmux_i2c1_pins {
 162                 pinctrl-single,pins = <
 163                         DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
 164                         DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
 165                 >;
 166         };
 167
 168         i2c2_pins: pinmux_i2c2_pins {
 169                 pinctrl-single,pins = <
 170                         DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
 171                         DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
 172                 >;
 173         };
 174
 175         i2c3_pins: pinmux_i2c3_pins {
 176                 pinctrl-single,pins = <
 177                         DRA7XX_CORE_IOPAD(0x3688, PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
 178                         DRA7XX_CORE_IOPAD(0x368c, PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 179                 >;
 180         };
 181
 182         mcspi1_pins: pinmux_mcspi1_pins {
 183                 pinctrl-single,pins = <
 184                         DRA7XX_CORE_IOPAD(0x37a4, PIN_INPUT | MUX_MODE0) /* spi1_sclk */
 185                         DRA7XX_CORE_IOPAD(0x37a8, PIN_INPUT | MUX_MODE0) /* spi1_d1 */
 186                         DRA7XX_CORE_IOPAD(0x37ac, PIN_INPUT | MUX_MODE0) /* spi1_d0 */
 187                         DRA7XX_CORE_IOPAD(0x37b0, PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
 188                         DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
 189                         DRA7XX_CORE_IOPAD(0x37bc, PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 190                 >;
 191         };
 192
 193         mcspi2_pins: pinmux_mcspi2_pins {
 194                 pinctrl-single,pins = <
 195                         DRA7XX_CORE_IOPAD(0x37c0, PIN_INPUT | MUX_MODE0) /* spi2_sclk */
 196                         DRA7XX_CORE_IOPAD(0x37c4, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 197                         DRA7XX_CORE_IOPAD(0x37c8, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
 198                         DRA7XX_CORE_IOPAD(0x37cc, PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
 199                 >;
 200         };
 201
 202         uart1_pins: pinmux_uart1_pins {
 203                 pinctrl-single,pins = <
 204                         DRA7XX_CORE_IOPAD(0x37e0, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
 205                         DRA7XX_CORE_IOPAD(0x37e4, PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
 206                         DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
 207                         DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
 208                 >;
 209         };
 210
 211         uart2_pins: pinmux_uart2_pins {
 212                 pinctrl-single,pins = <
 213                         DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT | MUX_MODE0) /* uart2_rxd */
 214                         DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT | MUX_MODE0) /* uart2_txd */
 215                         DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
 216                         DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
 217                 >;
 218         };
 219
 220         uart3_pins: pinmux_uart3_pins {
 221                 pinctrl-single,pins = <
 222                         DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
 223                         DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
 224                 >;
 225         };
 226
 227         qspi1_pins: pinmux_qspi1_pins {
 228                 pinctrl-single,pins = <
 229                         DRA7XX_CORE_IOPAD(0x344c, PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
 230                         DRA7XX_CORE_IOPAD(0x3450, PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
 231                         DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
 232                         DRA7XX_CORE_IOPAD(0x3478, PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
 233                         DRA7XX_CORE_IOPAD(0x347c, PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
 234                         DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
 235                         DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
 236                         DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
 237                         DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
 238                         DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
 239                 >;
 240         };
 241
 242         usb1_pins: pinmux_usb1_pins {
 243                 pinctrl-single,pins = <
 244                         DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
 245                 >;
 246         };
 247
 248         usb2_pins: pinmux_usb2_pins {
 249                 pinctrl-single,pins = <
 250                         DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
 251                 >;
 252         };
 253
 254         nand_flash_x16: nand_flash_x16 {
 255                 /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
 256                  * So NAND flash requires following switch settings:
 257                  * SW5.9 (GPMC_WPN) = LOW
 258                  * SW5.1 (NAND_BOOTn) = HIGH */
 259                 pinctrl-single,pins = <
 260                         DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad0     */
 261                         DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad1     */
 262                         DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad2     */
 263                         DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad3     */
 264                         DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad4     */
 265                         DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad5     */
 266                         DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad6     */
 267                         DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad7     */
 268                         DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad8     */
 269                         DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad9     */
 270                         DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad10    */
 271                         DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad11    */
 272                         DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad12    */
 273                         DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad13    */
 274                         DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad14    */
 275                         DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT  | MUX_MODE0)       /* gpmc_ad15    */
 276                         DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT_PULLUP  | MUX_MODE0)        /* gpmc_wait0   */
 277                         DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0)       /* gpmc_wen     */
 278                         DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* gpmc_csn0    */
 279                         DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0)       /* gpmc_advn_ale */
 280                         DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0)       /* gpmc_oen_ren  */
 281                         DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0)       /* gpmc_be0n_cle */
 282                 >;
 283         };
 284
 285         cpsw_default: cpsw_default {
 286                 pinctrl-single,pins = <
 287                         /* Slave 1 */
 288                         DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txc.rgmii0_txc */
 289                         DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txctl.rgmii0_txctl */
 290                         DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_td3.rgmii0_txd3 */
 291                         DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd2.rgmii0_txd2 */
 292                         DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd1.rgmii0_txd1 */
 293                         DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)       /* rgmii0_txd0.rgmii0_txd0 */
 294                         DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxc.rgmii0_rxc */
 295                         DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxctl.rgmii0_rxctl */
 296                         DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd3.rgmii0_rxd3 */
 297                         DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd2.rgmii0_rxd2 */
 298                         DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd1.rgmii0_rxd1 */
 299                         DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE0)        /* rgmii0_rxd0.rgmii0_rxd0 */
 300
 301                         /* Slave 2 */
 302                         DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d12.rgmii1_txc */
 303                         DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d13.rgmii1_tctl */
 304                         DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d14.rgmii1_td3 */
 305                         DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d15.rgmii1_td2 */
 306                         DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d16.rgmii1_td1 */
 307                         DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)       /* vin2a_d17.rgmii1_td0 */
 308                         DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3)        /* vin2a_d18.rgmii1_rclk */
 309                         DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3)        /* vin2a_d19.rgmii1_rctl */
 310                         DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3)        /* vin2a_d20.rgmii1_rd3 */
 311                         DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3)        /* vin2a_d21.rgmii1_rd2 */
 312                         DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3)        /* vin2a_d22.rgmii1_rd1 */
 313                         DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3)        /* vin2a_d23.rgmii1_rd0 */
 314                 >;
 315
 316         };
 317
 318         cpsw_sleep: cpsw_sleep {
 319                 pinctrl-single,pins = <
 320                         /* Slave 1 */
 321                         DRA7XX_CORE_IOPAD(0x3650, MUX_MODE15)
 322                         DRA7XX_CORE_IOPAD(0x3654, MUX_MODE15)
 323                         DRA7XX_CORE_IOPAD(0x3658, MUX_MODE15)
 324                         DRA7XX_CORE_IOPAD(0x365c, MUX_MODE15)
 325                         DRA7XX_CORE_IOPAD(0x3660, MUX_MODE15)
 326                         DRA7XX_CORE_IOPAD(0x3664, MUX_MODE15)
 327                         DRA7XX_CORE_IOPAD(0x3668, MUX_MODE15)
 328                         DRA7XX_CORE_IOPAD(0x366c, MUX_MODE15)
 329                         DRA7XX_CORE_IOPAD(0x3670, MUX_MODE15)
 330                         DRA7XX_CORE_IOPAD(0x3674, MUX_MODE15)
 331                         DRA7XX_CORE_IOPAD(0x3678, MUX_MODE15)
 332                         DRA7XX_CORE_IOPAD(0x367c, MUX_MODE15)
 333
 334                         /* Slave 2 */
 335                         DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15)
 336                         DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15)
 337                         DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15)
 338                         DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15)
 339                         DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15)
 340                         DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15)
 341                         DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15)
 342                         DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15)
 343                         DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15)
 344                         DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15)
 345                         DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15)
 346                         DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15)
 347                 >;
 348         };
 349
 350         davinci_mdio_default: davinci_mdio_default {
 351                 pinctrl-single,pins = <
 352                         DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* mdio_d.mdio_d */
 353                         DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
 354                 >;
 355         };
 356
 357         davinci_mdio_sleep: davinci_mdio_sleep {
 358                 pinctrl-single,pins = <
 359                         DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15)
 360                         DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15)
 361                 >;
 362         };
 363
 364         dcan1_pins_default: dcan1_pins_default {
 365                 pinctrl-single,pins = <
 366                         DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
 367                         DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 368                 >;
 369         };
 370
 371         dcan1_pins_sleep: dcan1_pins_sleep {
 372                 pinctrl-single,pins = <
 373                         DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
 374                         DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
 375                 >;
 376         };
 377
 378         atl_pins: pinmux_atl_pins {
 379                 pinctrl-single,pins = <
 380                         DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5)       /* xref_clk1.atl_clk1 */
 381                         DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5)       /* xref_clk2.atl_clk2 */
 382                 >;
 383         };
 384
 385         mcasp3_pins: pinmux_mcasp3_pins {
 386                 pinctrl-single,pins = <
 387                         DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_aclkx */
 388                         DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_fsx */
 389                         DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)      /* mcasp3_axr0 */
 390                         DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0)       /* mcasp3_axr1 */
 391                 >;
 392         };
 393
 394         mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins {
 395                 pinctrl-single,pins = <
 396                         DRA7XX_CORE_IOPAD(0x3724, MUX_MODE15)
 397                         DRA7XX_CORE_IOPAD(0x3728, MUX_MODE15)
 398                         DRA7XX_CORE_IOPAD(0x372c, MUX_MODE15)
 399                         DRA7XX_CORE_IOPAD(0x3730, MUX_MODE15)
 400                 >;
 401         };
 402 };
 403
 404 &i2c1 {
 405         status = "okay";
 406         pinctrl-names = "default";
 407         pinctrl-0 = <&i2c1_pins>;
 408         clock-frequency = <400000>;
 409
 410         tps659038: tps659038@58 {
 411                 compatible = "ti,tps659038";
 412                 reg = <0x58>;
 413
 414                 tps659038_pmic {
 415                         compatible = "ti,tps659038-pmic";
 416
 417                         regulators {
 418                                 smps123_reg: smps123 {
 419                                         /* VDD_MPU */
 420                                         regulator-name = "smps123";
 421                                         regulator-min-microvolt = < 850000>;
 422                                         regulator-max-microvolt = <1250000>;
 423                                         regulator-always-on;
 424                                         regulator-boot-on;
 425                                 };
 426
 427                                 smps45_reg: smps45 {
 428                                         /* VDD_DSPEVE */
 429                                         regulator-name = "smps45";
 430                                         regulator-min-microvolt = < 850000>;
 431                                         regulator-max-microvolt = <1150000>;
 432                                         regulator-always-on;
 433                                         regulator-boot-on;
 434                                 };
 435
 436                                 smps6_reg: smps6 {
 437                                         /* VDD_GPU - over VDD_SMPS6 */
 438                                         regulator-name = "smps6";
 439                                         regulator-min-microvolt = <850000>;
 440                                         regulator-max-microvolt = <1250000>;
 441                                         regulator-always-on;
 442                                         regulator-boot-on;
 443                                 };
 444
 445                                 smps7_reg: smps7 {
 446                                         /* CORE_VDD */
 447                                         regulator-name = "smps7";
 448                                         regulator-min-microvolt = <850000>;
 449                                         regulator-max-microvolt = <1060000>;
 450                                         regulator-always-on;
 451                                         regulator-boot-on;
 452                                 };
 453
 454                                 smps8_reg: smps8 {
 455                                         /* VDD_IVAHD */
 456                                         regulator-name = "smps8";
 457                                         regulator-min-microvolt = < 850000>;
 458                                         regulator-max-microvolt = <1250000>;
 459                                         regulator-always-on;
 460                                         regulator-boot-on;
 461                                 };
 462
 463                                 smps9_reg: smps9 {
 464                                         /* VDDS1V8 */
 465                                         regulator-name = "smps9";
 466                                         regulator-min-microvolt = <1800000>;
 467                                         regulator-max-microvolt = <1800000>;
 468                                         regulator-always-on;
 469                                         regulator-boot-on;
 470                                 };
 471
 472                                 ldo1_reg: ldo1 {
 473                                         /* LDO1_OUT --> SDIO  */
 474                                         regulator-name = "ldo1";
 475                                         regulator-min-microvolt = <1800000>;
 476                                         regulator-max-microvolt = <3300000>;
 477                                         regulator-always-on;
 478                                         regulator-boot-on;
 479                                 };
 480
 481                                 ldo2_reg: ldo2 {
 482                                         /* VDD_RTCIO */
 483                                         /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
 484                                         regulator-name = "ldo2";
 485                                         regulator-min-microvolt = <3300000>;
 486                                         regulator-max-microvolt = <3300000>;
 487                                         regulator-always-on;
 488                                         regulator-boot-on;
 489                                 };
 490
 491                                 ldo3_reg: ldo3 {
 492                                         /* VDDA_1V8_PHY */
 493                                         regulator-name = "ldo3";
 494                                         regulator-min-microvolt = <1800000>;
 495                                         regulator-max-microvolt = <1800000>;
 496                                         regulator-always-on;
 497                                         regulator-boot-on;
 498                                 };
 499
 500                                 ldo9_reg: ldo9 {
 501                                         /* VDD_RTC */
 502                                         regulator-name = "ldo9";
 503                                         regulator-min-microvolt = <1050000>;
 504                                         regulator-max-microvolt = <1050000>;
 505                                         regulator-always-on;
 506                                         regulator-boot-on;
 507                                         regulator-allow-bypass;
 508                                 };
 509
 510                                 ldoln_reg: ldoln {
 511                                         /* VDDA_1V8_PLL */
 512                                         regulator-name = "ldoln";
 513                                         regulator-min-microvolt = <1800000>;
 514                                         regulator-max-microvolt = <1800000>;
 515                                         regulator-always-on;
 516                                         regulator-boot-on;
 517                                 };
 518
 519                                 ldousb_reg: ldousb {
 520                                         /* VDDA_3V_USB: VDDA_USBHS33 */
 521                                         regulator-name = "ldousb";
 522                                         regulator-min-microvolt = <3300000>;
 523                                         regulator-max-microvolt = <3300000>;
 524                                         regulator-boot-on;
 525                                 };
 526                         };
 527                 };
 528         };
 529
 530         pcf_lcd: gpio@20 {
 531                 compatible = "nxp,pcf8575";
 532                 reg = <0x20>;
 533                 gpio-controller;
 534                 #gpio-cells = <2>;
 535                 interrupt-parent = <&gpio6>;
 536                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 537                 interrupt-controller;
 538                 #interrupt-cells = <2>;
 539         };
 540
 541         pcf_gpio_21: gpio@21 {
 542                 compatible = "ti,pcf8575";
 543                 reg = <0x21>;
 544                 lines-initial-states = <0x1408>;
 545                 gpio-controller;
 546                 #gpio-cells = <2>;
 547                 interrupt-parent = <&gpio6>;
 548                 interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 549                 interrupt-controller;
 550                 #interrupt-cells = <2>;
 551         };
 552
 553         tlv320aic3106: tlv320aic3106@19 {
 554                 #sound-dai-cells = <0>;
 555                 compatible = "ti,tlv320aic3106";
 556                 reg = <0x19>;
 557                 adc-settle-ms = <40>;
 558                 ai3x-micbias-vg = <1>;          /* 2.0V */
 559                 status = "okay";
 560
 561                 /* Regulators */
 562                 AVDD-supply = <&evm_3v3_sw>;
 563                 IOVDD-supply = <&evm_3v3_sw>;
 564                 DRVDD-supply = <&evm_3v3_sw>;
 565                 DVDD-supply = <&aic_dvdd>;
 566         };
 567 };
 568
 569 &i2c2 {
 570         status = "okay";
 571         pinctrl-names = "default";
 572         pinctrl-0 = <&i2c2_pins>;
 573         clock-frequency = <400000>;
 574
 575         pcf_hdmi: gpio@26 {
 576                 compatible = "nxp,pcf8575";
 577                 reg = <0x26>;
 578                 gpio-controller;
 579                 #gpio-cells = <2>;
 580                 p1 {
 581                         /* vin6_sel_s0: high: VIN6, low: audio */
 582                         gpio-hog;
 583                         gpios = <1 GPIO_ACTIVE_HIGH>;
 584                         output-low;
 585                         line-name = "vin6_sel_s0";
 586                 };
 587         };
 588 };
 589
 590 &i2c3 {
 591         status = "okay";
 592         pinctrl-names = "default";
 593         pinctrl-0 = <&i2c3_pins>;
 594         clock-frequency = <400000>;
 595 };
 596
 597 &mcspi1 {
 598         status = "okay";
 599         pinctrl-names = "default";
 600         pinctrl-0 = <&mcspi1_pins>;
 601 };
 602
 603 &mcspi2 {
 604         status = "okay";
 605         pinctrl-names = "default";
 606         pinctrl-0 = <&mcspi2_pins>;
 607 };
 608
 609 &uart1 {
 610         status = "okay";
 611         pinctrl-names = "default";
 612         pinctrl-0 = <&uart1_pins>;
 613         interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
 614                               <&dra7_pmx_core 0x3e0>;
 615 };
 616
 617 &uart2 {
 618         status = "okay";
 619         pinctrl-names = "default";
 620         pinctrl-0 = <&uart2_pins>;
 621 };
 622
 623 &uart3 {
 624         status = "okay";
 625         pinctrl-names = "default";
 626         pinctrl-0 = <&uart3_pins>;
 627 };
 628
 629 &mmc1 {
 630         status = "okay";
 631         vmmc-supply = <&evm_3v3_sd>;
 632         vmmc_aux-supply = <&ldo1_reg>;
 633         bus-width = <4>;
 634         /*
 635          * SDCD signal is not being used here - using the fact that GPIO mode
 636          * is always hardwired.
 637          */
 638         cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
 639 };
 640
 641 &mmc2 {
 642         status = "okay";
 643         vmmc-supply = <&evm_3v3_sw>;
 644         bus-width = <8>;
 645 };
 646
 647 &cpu0 {
 648         cpu0-supply = <&smps123_reg>;
 649 };
 650
 651 &qspi {
 652         status = "okay";
 653         pinctrl-names = "default";
 654         pinctrl-0 = <&qspi1_pins>;
 655
 656         spi-max-frequency = <48000000>;
 657         m25p80@0 {
 658                 compatible = "s25fl256s1";
 659                 spi-max-frequency = <48000000>;
 660                 reg = <0>;
 661                 spi-tx-bus-width = <1>;
 662                 spi-rx-bus-width = <4>;
 663                 spi-cpol;
 664                 spi-cpha;
 665                 #address-cells = <1>;
 666                 #size-cells = <1>;
 667
 668                 /* MTD partition table.
 669                  * The ROM checks the first four physical blocks
 670                  * for a valid file to boot and the flash here is
 671                  * 64KiB block size.
 672                  */
 673                 partition@0 {
 674                         label = "QSPI.SPL";
 675                         reg = <0x00000000 0x000010000>;
 676                 };
 677                 partition@1 {
 678                         label = "QSPI.SPL.backup1";
 679                         reg = <0x00010000 0x00010000>;
 680                 };
 681                 partition@2 {
 682                         label = "QSPI.SPL.backup2";
 683                         reg = <0x00020000 0x00010000>;
 684                 };
 685                 partition@3 {
 686                         label = "QSPI.SPL.backup3";
 687                         reg = <0x00030000 0x00010000>;
 688                 };
 689                 partition@4 {
 690                         label = "QSPI.u-boot";
 691                         reg = <0x00040000 0x00100000>;
 692                 };
 693                 partition@5 {
 694                         label = "QSPI.u-boot-spl-os";
 695                         reg = <0x00140000 0x00080000>;
 696                 };
 697                 partition@6 {
 698                         label = "QSPI.u-boot-env";
 699                         reg = <0x001c0000 0x00010000>;
 700                 };
 701                 partition@7 {
 702                         label = "QSPI.u-boot-env.backup1";
 703                         reg = <0x001d0000 0x0010000>;
 704                 };
 705                 partition@8 {
 706                         label = "QSPI.kernel";
 707                         reg = <0x001e0000 0x0800000>;
 708                 };
 709                 partition@9 {
 710                         label = "QSPI.file-system";
 711                         reg = <0x009e0000 0x01620000>;
 712                 };
 713         };
 714 };
 715
 716 &omap_dwc3_1 {
 717         extcon = <&extcon_usb1>;
 718 };
 719
 720 &omap_dwc3_2 {
 721         extcon = <&extcon_usb2>;
 722 };
 723
 724 &usb1 {
 725         dr_mode = "peripheral";
 726         pinctrl-names = "default";
 727         pinctrl-0 = <&usb1_pins>;
 728 };
 729
 730 &usb2 {
 731         dr_mode = "host";
 732         pinctrl-names = "default";
 733         pinctrl-0 = <&usb2_pins>;
 734 };
 735
 736 &elm {
 737         status = "okay";
 738 };
 739
 740 &gpmc {
 741         status = "okay";
 742         pinctrl-names = "default";
 743         pinctrl-0 = <&nand_flash_x16>;
 744         ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
 745         nand@0,0 {
 746                 reg = <0 0 4>;          /* device IO registers */
 747                 ti,nand-ecc-opt = "bch8";
 748                 ti,elm-id = <&elm>;
 749                 nand-bus-width = <16>;
 750                 gpmc,device-width = <2>;
 751                 gpmc,sync-clk-ps = <0>;
 752                 gpmc,cs-on-ns = <0>;
 753                 gpmc,cs-rd-off-ns = <80>;
 754                 gpmc,cs-wr-off-ns = <80>;
 755                 gpmc,adv-on-ns = <0>;
 756                 gpmc,adv-rd-off-ns = <60>;
 757                 gpmc,adv-wr-off-ns = <60>;
 758                 gpmc,we-on-ns = <10>;
 759                 gpmc,we-off-ns = <50>;
 760                 gpmc,oe-on-ns = <4>;
 761                 gpmc,oe-off-ns = <40>;
 762                 gpmc,access-ns = <40>;
 763                 gpmc,wr-access-ns = <80>;
 764                 gpmc,rd-cycle-ns = <80>;
 765                 gpmc,wr-cycle-ns = <80>;
 766                 gpmc,bus-turnaround-ns = <0>;
 767                 gpmc,cycle2cycle-delay-ns = <0>;
 768                 gpmc,clk-activation-ns = <0>;
 769                 gpmc,wait-monitoring-ns = <0>;
 770                 gpmc,wr-data-mux-bus-ns = <0>;
 771                 /* MTD partition table */
 772                 /* All SPL-* partitions are sized to minimal length
 773                  * which can be independently programmable. For
 774                  * NAND flash this is equal to size of erase-block */
 775                 #address-cells = <1>;
 776                 #size-cells = <1>;
 777                 partition@0 {
 778                         label = "NAND.SPL";
 779                         reg = <0x00000000 0x000020000>;
 780                 };
 781                 partition@1 {
 782                         label = "NAND.SPL.backup1";
 783                         reg = <0x00020000 0x00020000>;
 784                 };
 785                 partition@2 {
 786                         label = "NAND.SPL.backup2";
 787                         reg = <0x00040000 0x00020000>;
 788                 };
 789                 partition@3 {
 790                         label = "NAND.SPL.backup3";
 791                         reg = <0x00060000 0x00020000>;
 792                 };
 793                 partition@4 {
 794                         label = "NAND.u-boot-spl-os";
 795                         reg = <0x00080000 0x00040000>;
 796                 };
 797                 partition@5 {
 798                         label = "NAND.u-boot";
 799                         reg = <0x000c0000 0x00100000>;
 800                 };
 801                 partition@6 {
 802                         label = "NAND.u-boot-env";
 803                         reg = <0x001c0000 0x00020000>;
 804                 };
 805                 partition@7 {
 806                         label = "NAND.u-boot-env.backup1";
 807                         reg = <0x001e0000 0x00020000>;
 808                 };
 809                 partition@8 {
 810                         label = "NAND.kernel";
 811                         reg = <0x00200000 0x00800000>;
 812                 };
 813                 partition@9 {
 814                         label = "NAND.file-system";
 815                         reg = <0x00a00000 0x0f600000>;
 816                 };
 817         };
 818 };
 819
 820 &usb2_phy1 {
 821         phy-supply = <&ldousb_reg>;
 822 };
 823
 824 &usb2_phy2 {
 825         phy-supply = <&ldousb_reg>;
 826 };
 827
 828 &gpio7 {
 829         ti,no-reset-on-init;
 830         ti,no-idle-on-init;
 831 };
 832
 833 &mac {
 834         status = "okay";
 835         pinctrl-names = "default", "sleep";
 836         pinctrl-0 = <&cpsw_default>;
 837         pinctrl-1 = <&cpsw_sleep>;
 838         dual_emac;
 839 };
 840
 841 &cpsw_emac0 {
 842         phy_id = <&davinci_mdio>, <2>;
 843         phy-mode = "rgmii";
 844         dual_emac_res_vlan = <1>;
 845 };
 846
 847 &cpsw_emac1 {
 848         phy_id = <&davinci_mdio>, <3>;
 849         phy-mode = "rgmii";
 850         dual_emac_res_vlan = <2>;
 851 };
 852
 853 &davinci_mdio {
 854         pinctrl-names = "default", "sleep";
 855         pinctrl-0 = <&davinci_mdio_default>;
 856         pinctrl-1 = <&davinci_mdio_sleep>;
 857 };
 858
 859 &dcan1 {
 860         status = "ok";
 861         pinctrl-names = "default", "sleep", "active";
 862         pinctrl-0 = <&dcan1_pins_sleep>;
 863         pinctrl-1 = <&dcan1_pins_sleep>;
 864         pinctrl-2 = <&dcan1_pins_default>;
 865 };
 866
 867 &atl {
 868         pinctrl-names = "default";
 869         pinctrl-0 = <&atl_pins>;
 870
 871         assigned-clocks = <&abe_dpll_sys_clk_mux>,
 872                           <&atl_gfclk_mux>,
 873                           <&dpll_abe_ck>,
 874                           <&dpll_abe_m2x2_ck>,
 875                           <&atl_clkin2_ck>;
 876         assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
 877         assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
 878
 879         status = "okay";
 880
 881         atl2 {
 882                 bws = <DRA7_ATL_WS_MCASP2_FSX>;
 883                 aws = <DRA7_ATL_WS_MCASP3_FSX>;
 884         };
 885 };
 886
 887 &mcasp3 {
 888         #sound-dai-cells = <0>;
 889         pinctrl-names = "default", "sleep";
 890         pinctrl-0 = <&mcasp3_pins>;
 891         pinctrl-1 = <&mcasp3_sleep_pins>;
 892
 893         assigned-clocks = <&mcasp3_ahclkx_mux>;
 894         assigned-clock-parents = <&atl_clkin2_ck>;
 895
 896         status = "okay";
 897
 898         op-mode = <0>;          /* MCASP_IIS_MODE */
 899         tdm-slots = <2>;
 900         /* 4 serializer */
 901         serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 902                 1 2 0 0
 903         >;
 904 };
 905
 906 &mailbox5 {
 907         status = "okay";
 908         mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
 909                 status = "okay";
 910         };
 911         mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
 912                 status = "okay";
 913         };
 914 };
 915
 916 &mailbox6 {
 917         status = "okay";
 918         mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 919                 status = "okay";
 920         };
 921         mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 922                 status = "okay";
 923         };
 924 };