Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm into next
[deliverable/linux.git] / arch / arm / boot / dts / exynos4210-universal_c210.dts
1 /*
2 * Samsung's Exynos4210 based Universal C210 board device tree source
3 *
4 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
5 * http://www.samsung.com
6 *
7 * Device tree source file for Samsung's Universal C210 board which is based on
8 * Samsung's Exynos4210 rev0 SoC.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14
15 /dts-v1/;
16 #include "exynos4210.dtsi"
17
18 / {
19 model = "Samsung Universal C210 based on Exynos4210 rev0";
20 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
21
22 memory {
23 reg = <0x40000000 0x10000000
24 0x50000000 0x10000000>;
25 };
26
27 chosen {
28 bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
29 };
30
31 sysram@02020000 {
32 smp-sysram@0 {
33 status = "disabled";
34 };
35
36 smp-sysram@5000 {
37 compatible = "samsung,exynos4210-sysram";
38 reg = <0x5000 0x1000>;
39 };
40
41 smp-sysram@1f000 {
42 status = "disabled";
43 };
44 };
45
46 mct@10050000 {
47 compatible = "none";
48 };
49
50 fixed-rate-clocks {
51 xxti {
52 compatible = "samsung,clock-xxti";
53 clock-frequency = <0>;
54 };
55
56 xusbxti {
57 compatible = "samsung,clock-xusbxti";
58 clock-frequency = <24000000>;
59 };
60 };
61
62 vemmc_reg: voltage-regulator {
63 compatible = "regulator-fixed";
64 regulator-name = "VMEM_VDD_2_8V";
65 regulator-min-microvolt = <2800000>;
66 regulator-max-microvolt = <2800000>;
67 gpio = <&gpe1 3 0>;
68 enable-active-high;
69 };
70
71 hsotg@12480000 {
72 vusb_d-supply = <&ldo3_reg>;
73 vusb_a-supply = <&ldo8_reg>;
74 status = "okay";
75 };
76
77 sdhci_emmc: sdhci@12510000 {
78 bus-width = <8>;
79 non-removable;
80 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
81 pinctrl-names = "default";
82 vmmc-supply = <&vemmc_reg>;
83 status = "okay";
84 };
85
86 sdhci_sd: sdhci@12530000 {
87 bus-width = <4>;
88 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
89 pinctrl-names = "default";
90 vmmc-supply = <&ldo5_reg>;
91 cd-gpios = <&gpx3 4 0>;
92 cd-inverted;
93 status = "okay";
94 };
95
96 ehci@12580000 {
97 status = "okay";
98 port@0 {
99 status = "okay";
100 };
101 };
102
103 ohci@12590000 {
104 status = "okay";
105 port@0 {
106 status = "okay";
107 };
108 };
109
110 exynos-usbphy@125B0000 {
111 status = "okay";
112 };
113
114 serial@13800000 {
115 status = "okay";
116 };
117
118 serial@13810000 {
119 status = "okay";
120 };
121
122 serial@13820000 {
123 status = "okay";
124 };
125
126 serial@13830000 {
127 status = "okay";
128 };
129
130 gpio-keys {
131 compatible = "gpio-keys";
132
133 vol-up-key {
134 gpios = <&gpx2 0 1>;
135 linux,code = <115>;
136 label = "volume up";
137 debounce-interval = <1>;
138 };
139
140 vol-down-key {
141 gpios = <&gpx2 1 1>;
142 linux,code = <114>;
143 label = "volume down";
144 debounce-interval = <1>;
145 };
146
147 config-key {
148 gpios = <&gpx2 2 1>;
149 linux,code = <171>;
150 label = "config";
151 debounce-interval = <1>;
152 gpio-key,wakeup;
153 };
154
155 camera-key {
156 gpios = <&gpx2 3 1>;
157 linux,code = <212>;
158 label = "camera";
159 debounce-interval = <1>;
160 };
161
162 power-key {
163 gpios = <&gpx2 7 1>;
164 linux,code = <116>;
165 label = "power";
166 debounce-interval = <1>;
167 gpio-key,wakeup;
168 };
169
170 ok-key {
171 gpios = <&gpx3 5 1>;
172 linux,code = <352>;
173 label = "ok";
174 debounce-interval = <1>;
175 };
176 };
177
178 tsp_reg: voltage-regulator {
179 compatible = "regulator-fixed";
180 regulator-name = "TSP_2_8V";
181 regulator-min-microvolt = <2800000>;
182 regulator-max-microvolt = <2800000>;
183 gpio = <&gpe2 3 0>;
184 enable-active-high;
185 };
186
187 i2c@13890000 {
188 samsung,i2c-sda-delay = <100>;
189 samsung,i2c-slave-addr = <0x10>;
190 samsung,i2c-max-bus-freq = <100000>;
191 pinctrl-0 = <&i2c3_bus>;
192 pinctrl-names = "default";
193 status = "okay";
194
195 tsp@4a {
196 /* TBD: Atmel maXtouch touchscreen */
197 reg = <0x4a>;
198 };
199 };
200
201 i2c@138B0000 {
202 samsung,i2c-sda-delay = <100>;
203 samsung,i2c-slave-addr = <0x10>;
204 samsung,i2c-max-bus-freq = <100000>;
205 pinctrl-0 = <&i2c5_bus>;
206 pinctrl-names = "default";
207 status = "okay";
208
209 vdd_arm_reg: pmic@60 {
210 compatible = "maxim,max8952";
211 reg = <0x60>;
212
213 max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
214 max8952,default-mode = <0>;
215 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
216 <1050000>, <950000>;
217 max8952,sync-freq = <0>;
218 max8952,ramp-speed = <0>;
219
220 regulator-name = "vdd_arm";
221 regulator-min-microvolt = <770000>;
222 regulator-max-microvolt = <1400000>;
223 regulator-always-on;
224 regulator-boot-on;
225 };
226
227 pmic@66 {
228 compatible = "national,lp3974";
229 reg = <0x66>;
230
231 max8998,pmic-buck1-default-dvs-idx = <0>;
232 max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
233 <&gpx0 6 0>;
234 max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
235 <1100000>, <1000000>;
236
237 max8998,pmic-buck2-default-dvs-idx = <0>;
238 max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
239 max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
240
241 regulators {
242 ldo2_reg: LDO2 {
243 regulator-name = "VALIVE_1.2V";
244 regulator-min-microvolt = <1200000>;
245 regulator-max-microvolt = <1200000>;
246 regulator-always-on;
247 };
248
249 ldo3_reg: LDO3 {
250 regulator-name = "VUSB+MIPI_1.1V";
251 regulator-min-microvolt = <1100000>;
252 regulator-max-microvolt = <1100000>;
253 regulator-always-on;
254 };
255
256 ldo4_reg: LDO4 {
257 regulator-name = "VADC_3.3V";
258 regulator-min-microvolt = <3300000>;
259 regulator-max-microvolt = <3300000>;
260 };
261
262 ldo5_reg: LDO5 {
263 regulator-name = "VTF_2.8V";
264 regulator-min-microvolt = <2800000>;
265 regulator-max-microvolt = <2800000>;
266 };
267
268 ldo6_reg: LDO6 {
269 regulator-name = "LDO6";
270 regulator-min-microvolt = <2000000>;
271 regulator-max-microvolt = <2000000>;
272 };
273
274 ldo7_reg: LDO7 {
275 regulator-name = "VLCD+VMIPI_1.8V";
276 regulator-min-microvolt = <1800000>;
277 regulator-max-microvolt = <1800000>;
278 };
279
280 ldo8_reg: LDO8 {
281 regulator-name = "VUSB+VDAC_3.3V";
282 regulator-min-microvolt = <3300000>;
283 regulator-max-microvolt = <3300000>;
284 regulator-always-on;
285 };
286
287 ldo9_reg: LDO9 {
288 regulator-name = "VCC_2.8V";
289 regulator-min-microvolt = <2800000>;
290 regulator-max-microvolt = <2800000>;
291 regulator-always-on;
292 };
293
294 ldo10_reg: LDO10 {
295 regulator-name = "VPLL_1.1V";
296 regulator-min-microvolt = <1100000>;
297 regulator-max-microvolt = <1100000>;
298 regulator-boot-on;
299 regulator-always-on;
300 };
301
302 ldo11_reg: LDO11 {
303 regulator-name = "CAM_AF_3.3V";
304 regulator-min-microvolt = <3300000>;
305 regulator-max-microvolt = <3300000>;
306 };
307
308 ldo12_reg: LDO12 {
309 regulator-name = "PS_2.8V";
310 regulator-min-microvolt = <2800000>;
311 regulator-max-microvolt = <2800000>;
312 };
313
314 ldo13_reg: LDO13 {
315 regulator-name = "VHIC_1.2V";
316 regulator-min-microvolt = <1200000>;
317 regulator-max-microvolt = <1200000>;
318 };
319
320 ldo14_reg: LDO14 {
321 regulator-name = "CAM_I_HOST_1.8V";
322 regulator-min-microvolt = <1800000>;
323 regulator-max-microvolt = <1800000>;
324 };
325
326 ldo15_reg: LDO15 {
327 regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
328 regulator-min-microvolt = <1200000>;
329 regulator-max-microvolt = <1200000>;
330 };
331
332 ldo16_reg: LDO16 {
333 regulator-name = "CAM_S_ANA_2.8V";
334 regulator-min-microvolt = <2800000>;
335 regulator-max-microvolt = <2800000>;
336 };
337
338 ldo17_reg: LDO17 {
339 regulator-name = "VCC_3.0V_LCD";
340 regulator-min-microvolt = <3000000>;
341 regulator-max-microvolt = <3000000>;
342 };
343
344 buck1_reg: BUCK1 {
345 regulator-name = "VINT_1.1V";
346 regulator-min-microvolt = <750000>;
347 regulator-max-microvolt = <1500000>;
348 regulator-boot-on;
349 regulator-always-on;
350 };
351
352 buck2_reg: BUCK2 {
353 regulator-name = "VG3D_1.1V";
354 regulator-min-microvolt = <750000>;
355 regulator-max-microvolt = <1500000>;
356 regulator-boot-on;
357 };
358
359 buck3_reg: BUCK3 {
360 regulator-name = "VCC_1.8V";
361 regulator-min-microvolt = <1800000>;
362 regulator-max-microvolt = <1800000>;
363 regulator-always-on;
364 };
365
366 buck4_reg: BUCK4 {
367 regulator-name = "VMEM_1.2V";
368 regulator-min-microvolt = <1200000>;
369 regulator-max-microvolt = <1200000>;
370 regulator-always-on;
371 };
372
373 ap32khz_reg: EN32KHz-AP {
374 regulator-name = "32KHz AP";
375 regulator-always-on;
376 };
377
378 cp32khz_reg: EN32KHz-CP {
379 regulator-name = "32KHz CP";
380 };
381
382 vichg_reg: ENVICHG {
383 regulator-name = "VICHG";
384 };
385
386 safeout1_reg: ESAFEOUT1 {
387 regulator-name = "SAFEOUT1";
388 regulator-always-on;
389 };
390
391 safeout2_reg: ESAFEOUT2 {
392 regulator-name = "SAFEOUT2";
393 regulator-boot-on;
394 };
395 };
396 };
397 };
398
399 spi-lcd {
400 compatible = "spi-gpio";
401 #address-cells = <1>;
402 #size-cells = <0>;
403
404 gpio-sck = <&gpy3 1 0>;
405 gpio-mosi = <&gpy3 3 0>;
406 num-chipselects = <1>;
407 cs-gpios = <&gpy4 3 0>;
408
409 lcd@0 {
410 compatible = "samsung,ld9040";
411 reg = <0>;
412 vdd3-supply = <&ldo7_reg>;
413 vci-supply = <&ldo17_reg>;
414 reset-gpios = <&gpy4 5 0>;
415 spi-max-frequency = <1200000>;
416 spi-cpol;
417 spi-cpha;
418 power-on-delay = <10>;
419 reset-delay = <10>;
420 panel-width-mm = <90>;
421 panel-height-mm = <154>;
422 display-timings {
423 timing {
424 clock-frequency = <23492370>;
425 hactive = <480>;
426 vactive = <800>;
427 hback-porch = <16>;
428 hfront-porch = <16>;
429 vback-porch = <2>;
430 vfront-porch = <28>;
431 hsync-len = <2>;
432 vsync-len = <1>;
433 hsync-active = <0>;
434 vsync-active = <0>;
435 de-active = <0>;
436 pixelclk-active = <0>;
437 };
438 };
439 port {
440 lcd_ep: endpoint {
441 remote-endpoint = <&fimd_dpi_ep>;
442 };
443 };
444 };
445 };
446
447 fimd: fimd@11c00000 {
448 pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
449 pinctrl-names = "default";
450 status = "okay";
451 samsung,invert-vden;
452 samsung,invert-vclk;
453 #address-cells = <1>;
454 #size-cells = <0>;
455 port@3 {
456 reg = <3>;
457 fimd_dpi_ep: endpoint {
458 remote-endpoint = <&lcd_ep>;
459 };
460 };
461 };
462
463 pwm@139D0000 {
464 compatible = "samsung,s5p6440-pwm";
465 status = "okay";
466 };
467
468 camera {
469 status = "okay";
470
471 pinctrl-names = "default";
472 pinctrl-0 = <>;
473
474 fimc_0: fimc@11800000 {
475 status = "okay";
476 };
477
478 fimc_1: fimc@11810000 {
479 status = "okay";
480 };
481
482 fimc_2: fimc@11820000 {
483 status = "okay";
484 };
485
486 fimc_3: fimc@11830000 {
487 status = "okay";
488 };
489 };
490 };
491
492 &mdma1 {
493 reg = <0x12840000 0x1000>;
494 };
This page took 0.057292 seconds and 6 git commands to generate.