arch/arm/boot/dts/imx50.dtsi

   1 /*
   2  * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
   3  * Copyright 2011 Freescale Semiconductor, Inc.
   4  * Copyright 2011 Linaro Ltd.
   5  *
   6  * The code contained herein is licensed under the GNU General Public
   7  * License. You may obtain a copy of the GNU General Public License
   8  * Version 2 or later at the following locations:
   9  *
  10  * http://www.opensource.org/licenses/gpl-license.html
  11  * http://www.gnu.org/copyleft/gpl.html
  12  */
  13
  14 #include "skeleton.dtsi"
  15 #include "imx50-pinfunc.h"
  16 #include <dt-bindings/clock/imx5-clock.h>
  17
  18 / {
  19         aliases {
  20                 ethernet0 = &fec;
  21                 gpio0 = &gpio1;
  22                 gpio1 = &gpio2;
  23                 gpio2 = &gpio3;
  24                 gpio3 = &gpio4;
  25                 gpio4 = &gpio5;
  26                 gpio5 = &gpio6;
  27                 serial0 = &uart1;
  28                 serial1 = &uart2;
  29                 serial2 = &uart3;
  30                 serial3 = &uart4;
  31                 serial4 = &uart5;
  32         };
  33
  34         cpus {
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 cpu@0 {
  38                         device_type = "cpu";
  39                         compatible = "arm,cortex-a8";
  40                         reg = <0x0>;
  41                 };
  42         };
  43
  44         tzic: tz-interrupt-controller@0fffc000 {
  45                 compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
  46                 interrupt-controller;
  47                 #interrupt-cells = <1>;
  48                 reg = <0x0fffc000 0x4000>;
  49         };
  50
  51         clocks {
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54
  55                 ckil {
  56                         compatible = "fsl,imx-ckil", "fixed-clock";
  57                         #clock-cells = <0>;
  58                         clock-frequency = <32768>;
  59                 };
  60
  61                 ckih1 {
  62                         compatible = "fsl,imx-ckih1", "fixed-clock";
  63                         #clock-cells = <0>;
  64                         clock-frequency = <22579200>;
  65                 };
  66
  67                 ckih2 {
  68                         compatible = "fsl,imx-ckih2", "fixed-clock";
  69                         #clock-cells = <0>;
  70                         clock-frequency = <0>;
  71                 };
  72
  73                 osc {
  74                         compatible = "fsl,imx-osc", "fixed-clock";
  75                         #clock-cells = <0>;
  76                         clock-frequency = <24000000>;
  77                 };
  78         };
  79
  80         soc {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 compatible = "simple-bus";
  84                 interrupt-parent = <&tzic>;
  85                 ranges;
  86
  87                 aips@50000000 { /* AIPS1 */
  88                         compatible = "fsl,aips-bus", "simple-bus";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91                         reg = <0x50000000 0x10000000>;
  92                         ranges;
  93
  94                         spba@50000000 {
  95                                 compatible = "fsl,spba-bus", "simple-bus";
  96                                 #address-cells = <1>;
  97                                 #size-cells = <1>;
  98                                 reg = <0x50000000 0x40000>;
  99                                 ranges;
 100
 101                                 esdhc1: esdhc@50004000 {
 102                                         compatible = "fsl,imx50-esdhc";
 103                                         reg = <0x50004000 0x4000>;
 104                                         interrupts = <1>;
 105                                         clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
 106                                                  <&clks IMX5_CLK_DUMMY>,
 107                                                  <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 108                                         clock-names = "ipg", "ahb", "per";
 109                                         bus-width = <4>;
 110                                         status = "disabled";
 111                                 };
 112
 113                                 esdhc2: esdhc@50008000 {
 114                                         compatible = "fsl,imx50-esdhc";
 115                                         reg = <0x50008000 0x4000>;
 116                                         interrupts = <2>;
 117                                         clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
 118                                                  <&clks IMX5_CLK_DUMMY>,
 119                                                  <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 120                                         clock-names = "ipg", "ahb", "per";
 121                                         bus-width = <4>;
 122                                         status = "disabled";
 123                                 };
 124
 125                                 uart3: serial@5000c000 {
 126                                         compatible = "fsl,imx50-uart", "fsl,imx21-uart";
 127                                         reg = <0x5000c000 0x4000>;
 128                                         interrupts = <33>;
 129                                         clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
 130                                                  <&clks IMX5_CLK_UART3_PER_GATE>;
 131                                         clock-names = "ipg", "per";
 132                                         status = "disabled";
 133                                 };
 134
 135                                 ecspi1: ecspi@50010000 {
 136                                         #address-cells = <1>;
 137                                         #size-cells = <0>;
 138                                         compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
 139                                         reg = <0x50010000 0x4000>;
 140                                         interrupts = <36>;
 141                                         clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
 142                                                  <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 143                                         clock-names = "ipg", "per";
 144                                         status = "disabled";
 145                                 };
 146
 147                                 ssi2: ssi@50014000 {
 148                                         #sound-dai-cells = <0>;
 149                                         compatible = "fsl,imx50-ssi",
 150                                                         "fsl,imx51-ssi",
 151                                                         "fsl,imx21-ssi";
 152                                         reg = <0x50014000 0x4000>;
 153                                         interrupts = <30>;
 154                                         clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
 155                                         dmas = <&sdma 24 1 0>,
 156                                                <&sdma 25 1 0>;
 157                                         dma-names = "rx", "tx";
 158                                         fsl,fifo-depth = <15>;
 159                                         status = "disabled";
 160                                 };
 161
 162                                 esdhc3: esdhc@50020000 {
 163                                         compatible = "fsl,imx50-esdhc";
 164                                         reg = <0x50020000 0x4000>;
 165                                         interrupts = <3>;
 166                                         clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
 167                                                  <&clks IMX5_CLK_DUMMY>,
 168                                                  <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 169                                         clock-names = "ipg", "ahb", "per";
 170                                         bus-width = <4>;
 171                                         status = "disabled";
 172                                 };
 173
 174                                 esdhc4: esdhc@50024000 {
 175                                         compatible = "fsl,imx50-esdhc";
 176                                         reg = <0x50024000 0x4000>;
 177                                         interrupts = <4>;
 178                                         clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
 179                                                  <&clks IMX5_CLK_DUMMY>,
 180                                                  <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 181                                         clock-names = "ipg", "ahb", "per";
 182                                         bus-width = <4>;
 183                                         status = "disabled";
 184                                 };
 185                         };
 186
 187                         usbotg: usb@53f80000 {
 188                                 compatible = "fsl,imx50-usb", "fsl,imx27-usb";
 189                                 reg = <0x53f80000 0x0200>;
 190                                 interrupts = <18>;
 191                                 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
 192                                 status = "disabled";
 193                         };
 194
 195                         usbh1: usb@53f80200 {
 196                                 compatible = "fsl,imx50-usb", "fsl,imx27-usb";
 197                                 reg = <0x53f80200 0x0200>;
 198                                 interrupts = <14>;
 199                                 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
 200                                 dr_mode = "host";
 201                                 status = "disabled";
 202                         };
 203
 204                         usbh2: usb@53f80400 {
 205                                 compatible = "fsl,imx50-usb", "fsl,imx27-usb";
 206                                 reg = <0x53f80400 0x0200>;
 207                                 interrupts = <16>;
 208                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 209                                 dr_mode = "host";
 210                                 status = "disabled";
 211                         };
 212
 213                         usbh3: usb@53f80600 {
 214                                 compatible = "fsl,imx50-usb", "fsl,imx27-usb";
 215                                 reg = <0x53f80600 0x0200>;
 216                                 interrupts = <17>;
 217                                 clocks = <&clks IMX5_CLK_USBOH3_GATE>;
 218                                 dr_mode = "host";
 219                                 status = "disabled";
 220                         };
 221
 222                         gpio1: gpio@53f84000 {
 223                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 224                                 reg = <0x53f84000 0x4000>;
 225                                 interrupts = <50 51>;
 226                                 gpio-controller;
 227                                 #gpio-cells = <2>;
 228                                 interrupt-controller;
 229                                 #interrupt-cells = <2>;
 230                         };
 231
 232                         gpio2: gpio@53f88000 {
 233                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 234                                 reg = <0x53f88000 0x4000>;
 235                                 interrupts = <52 53>;
 236                                 gpio-controller;
 237                                 #gpio-cells = <2>;
 238                                 interrupt-controller;
 239                                 #interrupt-cells = <2>;
 240                         };
 241
 242                         gpio3: gpio@53f8c000 {
 243                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 244                                 reg = <0x53f8c000 0x4000>;
 245                                 interrupts = <54 55>;
 246                                 gpio-controller;
 247                                 #gpio-cells = <2>;
 248                                 interrupt-controller;
 249                                 #interrupt-cells = <2>;
 250                         };
 251
 252                         gpio4: gpio@53f90000 {
 253                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 254                                 reg = <0x53f90000 0x4000>;
 255                                 interrupts = <56 57>;
 256                                 gpio-controller;
 257                                 #gpio-cells = <2>;
 258                                 interrupt-controller;
 259                                 #interrupt-cells = <2>;
 260                         };
 261
 262                         wdog1: wdog@53f98000 {
 263                                 compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
 264                                 reg = <0x53f98000 0x4000>;
 265                                 interrupts = <58>;
 266                                 clocks = <&clks IMX5_CLK_DUMMY>;
 267                         };
 268
 269                         gpt: timer@53fa0000 {
 270                                 compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
 271                                 reg = <0x53fa0000 0x4000>;
 272                                 interrupts = <39>;
 273                                 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
 274                                          <&clks IMX5_CLK_GPT_HF_GATE>;
 275                                 clock-names = "ipg", "per";
 276                         };
 277
 278                         iomuxc: iomuxc@53fa8000 {
 279                                 compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
 280                                 reg = <0x53fa8000 0x4000>;
 281                         };
 282
 283                         gpr: iomuxc-gpr@53fa8000 {
 284                                 compatible = "fsl,imx50-iomuxc-gpr", "syscon";
 285                                 reg = <0x53fa8000 0xc>;
 286                         };
 287
 288                         pwm1: pwm@53fb4000 {
 289                                 #pwm-cells = <2>;
 290                                 compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 291                                 reg = <0x53fb4000 0x4000>;
 292                                 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
 293                                          <&clks IMX5_CLK_PWM1_HF_GATE>;
 294                                 clock-names = "ipg", "per";
 295                                 interrupts = <61>;
 296                         };
 297
 298                         pwm2: pwm@53fb8000 {
 299                                 #pwm-cells = <2>;
 300                                 compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 301                                 reg = <0x53fb8000 0x4000>;
 302                                 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
 303                                          <&clks IMX5_CLK_PWM2_HF_GATE>;
 304                                 clock-names = "ipg", "per";
 305                                 interrupts = <94>;
 306                         };
 307
 308                         uart1: serial@53fbc000 {
 309                                 compatible = "fsl,imx50-uart", "fsl,imx21-uart";
 310                                 reg = <0x53fbc000 0x4000>;
 311                                 interrupts = <31>;
 312                                 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
 313                                          <&clks IMX5_CLK_UART1_PER_GATE>;
 314                                 clock-names = "ipg", "per";
 315                                 status = "disabled";
 316                         };
 317
 318                         uart2: serial@53fc0000 {
 319                                 compatible = "fsl,imx50-uart", "fsl,imx21-uart";
 320                                 reg = <0x53fc0000 0x4000>;
 321                                 interrupts = <32>;
 322                                 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
 323                                          <&clks IMX5_CLK_UART2_PER_GATE>;
 324                                 clock-names = "ipg", "per";
 325                                 status = "disabled";
 326                         };
 327
 328                         src: src@53fd0000 {
 329                                 compatible = "fsl,imx50-src", "fsl,imx51-src";
 330                                 reg = <0x53fd0000 0x4000>;
 331                                 #reset-cells = <1>;
 332                         };
 333
 334                         clks: ccm@53fd4000{
 335                                 compatible = "fsl,imx50-ccm";
 336                                 reg = <0x53fd4000 0x4000>;
 337                                 interrupts = <0 71 0x04 0 72 0x04>;
 338                                 #clock-cells = <1>;
 339                         };
 340
 341                         gpio5: gpio@53fdc000 {
 342                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 343                                 reg = <0x53fdc000 0x4000>;
 344                                 interrupts = <103 104>;
 345                                 gpio-controller;
 346                                 #gpio-cells = <2>;
 347                                 interrupt-controller;
 348                                 #interrupt-cells = <2>;
 349                         };
 350
 351                         gpio6: gpio@53fe0000 {
 352                                 compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 353                                 reg = <0x53fe0000 0x4000>;
 354                                 interrupts = <105 106>;
 355                                 gpio-controller;
 356                                 #gpio-cells = <2>;
 357                                 interrupt-controller;
 358                                 #interrupt-cells = <2>;
 359                         };
 360
 361                         i2c3: i2c@53fec000 {
 362                                 #address-cells = <1>;
 363                                 #size-cells = <0>;
 364                                 compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
 365                                 reg = <0x53fec000 0x4000>;
 366                                 interrupts = <64>;
 367                                 clocks = <&clks IMX5_CLK_I2C3_GATE>;
 368                                 status = "disabled";
 369                         };
 370
 371                         uart4: serial@53ff0000 {
 372                                 compatible = "fsl,imx50-uart", "fsl,imx21-uart";
 373                                 reg = <0x53ff0000 0x4000>;
 374                                 interrupts = <13>;
 375                                 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
 376                                          <&clks IMX5_CLK_UART4_PER_GATE>;
 377                                 clock-names = "ipg", "per";
 378                                 status = "disabled";
 379                         };
 380                 };
 381
 382                 aips@60000000 { /* AIPS2 */
 383                         compatible = "fsl,aips-bus", "simple-bus";
 384                         #address-cells = <1>;
 385                         #size-cells = <1>;
 386                         reg = <0x60000000 0x10000000>;
 387                         ranges;
 388
 389                         uart5: serial@63f90000 {
 390                                 compatible = "fsl,imx50-uart", "fsl,imx21-uart";
 391                                 reg = <0x63f90000 0x4000>;
 392                                 interrupts = <86>;
 393                                 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
 394                                          <&clks IMX5_CLK_UART5_PER_GATE>;
 395                                 clock-names = "ipg", "per";
 396                                 status = "disabled";
 397                         };
 398
 399                         owire: owire@63fa4000 {
 400                                 compatible = "fsl,imx50-owire", "fsl,imx21-owire";
 401                                 reg = <0x63fa4000 0x4000>;
 402                                 clocks = <&clks IMX5_CLK_OWIRE_GATE>;
 403                                 status = "disabled";
 404                         };
 405
 406                         ecspi2: ecspi@63fac000 {
 407                                 #address-cells = <1>;
 408                                 #size-cells = <0>;
 409                                 compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
 410                                 reg = <0x63fac000 0x4000>;
 411                                 interrupts = <37>;
 412                                 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
 413                                          <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 414                                 clock-names = "ipg", "per";
 415                                 status = "disabled";
 416                         };
 417
 418                         sdma: sdma@63fb0000 {
 419                                 compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 420                                 reg = <0x63fb0000 0x4000>;
 421                                 interrupts = <6>;
 422                                 clocks = <&clks IMX5_CLK_SDMA_GATE>,
 423                                          <&clks IMX5_CLK_SDMA_GATE>;
 424                                 clock-names = "ipg", "ahb";
 425                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 426                         };
 427
 428                         cspi: cspi@63fc0000 {
 429                                 #address-cells = <1>;
 430                                 #size-cells = <0>;
 431                                 compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
 432                                 reg = <0x63fc0000 0x4000>;
 433                                 interrupts = <38>;
 434                                 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
 435                                          <&clks IMX5_CLK_CSPI_IPG_GATE>;
 436                                 clock-names = "ipg", "per";
 437                                 status = "disabled";
 438                         };
 439
 440                         i2c2: i2c@63fc4000 {
 441                                 #address-cells = <1>;
 442                                 #size-cells = <0>;
 443                                 compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
 444                                 reg = <0x63fc4000 0x4000>;
 445                                 interrupts = <63>;
 446                                 clocks = <&clks IMX5_CLK_I2C2_GATE>;
 447                                 status = "disabled";
 448                         };
 449
 450                         i2c1: i2c@63fc8000 {
 451                                 #address-cells = <1>;
 452                                 #size-cells = <0>;
 453                                 compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
 454                                 reg = <0x63fc8000 0x4000>;
 455                                 interrupts = <62>;
 456                                 clocks = <&clks IMX5_CLK_I2C1_GATE>;
 457                                 status = "disabled";
 458                         };
 459
 460                         ssi1: ssi@63fcc000 {
 461                                 #sound-dai-cells = <0>;
 462                                 compatible = "fsl,imx50-ssi", "fsl,imx51-ssi",
 463                                                         "fsl,imx21-ssi";
 464                                 reg = <0x63fcc000 0x4000>;
 465                                 interrupts = <29>;
 466                                 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
 467                                 dmas = <&sdma 28 0 0>,
 468                                        <&sdma 29 0 0>;
 469                                 dma-names = "rx", "tx";
 470                                 fsl,fifo-depth = <15>;
 471                                 status = "disabled";
 472                         };
 473
 474                         audmux: audmux@63fd0000 {
 475                                 compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
 476                                 reg = <0x63fd0000 0x4000>;
 477                                 status = "disabled";
 478                         };
 479
 480                         fec: ethernet@63fec000 {
 481                                 compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 482                                 reg = <0x63fec000 0x4000>;
 483                                 interrupts = <87>;
 484                                 clocks = <&clks IMX5_CLK_FEC_GATE>,
 485                                          <&clks IMX5_CLK_FEC_GATE>,
 486                                          <&clks IMX5_CLK_FEC_GATE>;
 487                                 clock-names = "ipg", "ahb", "ptp";
 488                                 status = "disabled";
 489                         };
 490                 };
 491         };
 492 };