arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood.dtsi"
   4 #include "kirkwood-6281.dtsi"
   5
   6 / {
   7         model = "Iomega StorCenter ix2-200";
   8         compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   9
  10         memory {
  11                 device_type = "memory";
  12                 reg = <0x00000000 0x10000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  17                 stdout-path = &uart0;
  18         };
  19
  20         ocp@f1000000 {
  21                 pinctrl: pin-controller@10000 {
  22                         pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
  23                                       &pmx_led_sata_brt_ctrl_2
  24                                       &pmx_led_backup_brt_ctrl_1
  25                                       &pmx_led_backup_brt_ctrl_2
  26                                       &pmx_led_power_brt_ctrl_1
  27                                       &pmx_led_power_brt_ctrl_2
  28                                       &pmx_led_health_brt_ctrl_1
  29                                       &pmx_led_health_brt_ctrl_2
  30                                       &pmx_led_rebuild_brt_ctrl_1
  31                                       &pmx_led_rebuild_brt_ctrl_2 >;
  32                         pinctrl-names = "default";
  33
  34                         pmx_button_reset: pmx-button-reset {
  35                                 marvell,pins = "mpp12";
  36                                 marvell,function = "gpio";
  37                         };
  38                         pmx_button_power: pmx-button-power {
  39                                 marvell,pins = "mpp14";
  40                                 marvell,function = "gpio";
  41                         };
  42                         pmx_led_backup: pmx-led-backup {
  43                                 marvell,pins = "mpp15";
  44                                 marvell,function = "gpio";
  45                         };
  46                         pmx_led_power: pmx-led-power {
  47                                 marvell,pins = "mpp16";
  48                                 marvell,function = "gpio";
  49                         };
  50                         pmx_button_otb: pmx-button-otb {
  51                                 marvell,pins = "mpp35";
  52                                 marvell,function = "gpio";
  53                         };
  54                         pmx_led_rebuild: pmx-led-rebuild {
  55                                 marvell,pins = "mpp36";
  56                                 marvell,function = "gpio";
  57                         };
  58                         pmx_led_health: pmx-led_health {
  59                                 marvell,pins = "mpp37";
  60                                 marvell,function = "gpio";
  61                         };
  62                         pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
  63                                 marvell,pins = "mpp38";
  64                                 marvell,function = "gpio";
  65                         };
  66                         pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
  67                                 marvell,pins = "mpp39";
  68                                 marvell,function = "gpio";
  69                         };
  70                         pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
  71                                 marvell,pins = "mpp40";
  72                                 marvell,function = "gpio";
  73                         };
  74                         pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
  75                                 marvell,pins = "mpp41";
  76                                 marvell,function = "gpio";
  77                         };
  78                         pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
  79                                 marvell,pins = "mpp42";
  80                                 marvell,function = "gpio";
  81                         };
  82                         pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
  83                                 marvell,pins = "mpp43";
  84                                 marvell,function = "gpio";
  85                         };
  86                         pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
  87                                 marvell,pins = "mpp44";
  88                                 marvell,function = "gpio";
  89                         };
  90                         pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
  91                                 marvell,pins = "mpp45";
  92                                 marvell,function = "gpio";
  93                         };
  94                         pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
  95                                 marvell,pins = "mpp46";
  96                                 marvell,function = "gpio";
  97                         };
  98                         pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
  99                                 marvell,pins = "mpp47";
 100                                 marvell,function = "gpio";
 101                         };
 102
 103                 };
 104                 i2c@11000 {
 105                         status = "okay";
 106
 107                         lm63: lm63@4c {
 108                                 compatible = "national,lm63";
 109                                 reg = <0x4c>;
 110                         };
 111                 };
 112
 113                 serial@12000 {
 114                         status = "ok";
 115                 };
 116
 117                 sata@80000 {
 118                         status = "okay";
 119                         nr-ports = <2>;
 120                 };
 121
 122         };
 123         gpio-leds {
 124                 compatible = "gpio-leds";
 125                 pinctrl-0 = < &pmx_led_backup &pmx_led_power
 126                               &pmx_led_rebuild &pmx_led_health >;
 127                 pinctrl-names = "default";
 128
 129                 power_led {
 130                         label = "status:white:power_led";
 131                         gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 132                         default-state = "keep";
 133                 };
 134                 rebuild_led {
 135                         label = "status:white:rebuild_led";
 136                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 137                 };
 138                 health_led {
 139                         label = "status:red:health_led";
 140                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 141                 };
 142                 backup_led {
 143                         label = "status:blue:backup_led";
 144                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 145                 };
 146         };
 147         gpio-keys {
 148                 compatible = "gpio-keys";
 149                 #address-cells = <1>;
 150                 #size-cells = <0>;
 151                 pinctrl-0 = <&pmx_button_reset &pmx_button_power
 152                              &pmx_button_otb>;
 153                 pinctrl-names = "default";
 154
 155
 156                 Power {
 157                         label = "Power Button";
 158                         linux,code = <KEY_POWER>;
 159                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 160                 };
 161                 Reset {
 162                         label = "Reset Button";
 163                         linux,code = <KEY_RESTART>;
 164                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
 165                 };
 166                 OTB {
 167                         label = "OTB Button";
 168                         linux,code = <KEY_COPY>;
 169                         gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
 170                 };
 171         };
 172         gpio-poweroff {
 173                 compatible = "gpio-poweroff";
 174                 gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 175         };
 176 };
 177
 178 &nand {
 179         status = "okay";
 180
 181         partition@0 {
 182                 label = "u-boot";
 183                 reg = <0x0000000 0x100000>;
 184                 read-only;
 185         };
 186
 187         partition@a0000 {
 188                 label = "env";
 189                 reg = <0xa0000 0x20000>;
 190                 read-only;
 191         };
 192
 193         partition@100000 {
 194                 label = "uImage";
 195                 reg = <0x100000 0x300000>;
 196         };
 197
 198         partition@400000 {
 199                 label = "rootfs";
 200                 reg = <0x400000 0x1C00000>;
 201         };
 202 };
 203
 204 &mdio {
 205         status = "okay";
 206
 207         ethphy1: ethernet-phy@11 {
 208                 reg = <11>;
 209         };
 210 };
 211
 212 &eth0 {
 213         status = "okay";
 214         ethernet0-port@0 {
 215                 speed = <1000>;
 216                 duplex = <1>;
 217         };
 218 };
 219
 220 &eth1 {
 221         status = "okay";
 222         ethernet1-port@0 {
 223                 phy-handle = <&ethphy1>;
 224         };
 225 };