3 #include "kirkwood.dtsi"
4 #include "kirkwood-6282.dtsi"
7 model = "NETGEAR ReadyNAS Duo v2";
8 compatible = "netgear,readynas-duo-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood";
11 device_type = "memory";
12 reg = <0x00000000 0x10000000>;
16 bootargs = "console=ttyS0,115200n8 earlyprintk";
30 pinctrl: pinctrl@10000 {
31 pmx_button_power: pmx-button-power {
32 marvell,pins = "mpp47";
33 marvell,function = "gpio";
35 pmx_button_backup: pmx-button-backup {
36 marvell,pins = "mpp45";
37 marvell,function = "gpio";
39 pmx_button_reset: pmx-button-reset {
40 marvell,pins = "mpp13";
41 marvell,function = "gpio";
43 pmx_led_blue_power: pmx-led-blue-power {
44 marvell,pins = "mpp31";
45 marvell,function = "gpio";
47 pmx_led_blue_activity: pmx-led-blue-activity {
48 marvell,pins = "mpp38";
49 marvell,function = "gpio";
51 pmx_led_blue_disk1: pmx-led-blue-disk1 {
52 marvell,pins = "mpp23";
53 marvell,function = "gpio";
55 pmx_led_blue_disk2: pmx-led-blue-disk2 {
56 marvell,pins = "mpp22";
57 marvell,function = "gpio";
59 pmx_led_blue_backup: pmx-led-blue-backup {
60 marvell,pins = "mpp29";
61 marvell,function = "gpio";
70 compatible = "fixed-clock";
72 clock-frequency = <8192>;
79 rs5c372a: rs5c372a@32 {
80 compatible = "ricoh,rs5c372a";
85 compatible = "gmt,g762";
87 clocks = <&g762_clk>; /* input clock */
95 pinctrl-0 = <&pmx_uart0>;
96 pinctrl-names = "default";
107 compatible = "gpio-leds";
108 pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_activity
109 &pmx_led_blue_disk1 &pmx_led_blue_disk2
110 &pmx_led_blue_backup >;
111 pinctrl-names = "default";
114 label = "status:blue:power_led";
115 gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */
116 linux,default-trigger = "default-on";
119 label = "status:blue:activity_led";
120 gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */
123 label = "status:blue:disk1_led";
124 gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */
127 label = "status:blue:disk2_led";
128 gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */
131 label = "status:blue:backup_led";
132 gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/
137 compatible = "gpio-keys";
138 #address-cells = <1>;
140 pinctrl-0 = <&pmx_button_power &pmx_button_backup
142 pinctrl-names = "default";
145 label = "Power Button";
146 linux,code = <116>; /* KEY_POWER */
147 gpios = <&gpio1 15 1>;
150 label = "Reset Button";
151 linux,code = <0x198>; /* KEY_RESTART */
152 gpios = <&gpio0 13 1>;
155 label = "Backup Button";
156 linux,code = <133>; /* KEY_COPY */
157 gpios = <&gpio1 13 1>;
162 compatible = "simple-bus";
163 #address-cells = <1>;
166 usb_power: regulator@1 {
167 compatible = "regulator-fixed";
169 regulator-name = "USB 3.0 Power";
170 regulator-min-microvolt = <5000000>;
171 regulator-max-microvolt = <5000000>;
175 gpio = <&gpio1 14 0>;
185 reg = <0x0000000 0x180000>;
190 label = "u-boot-env";
191 reg = <0x180000 0x20000>;
196 reg = <0x0200000 0x600000>;
200 label = "minirootfs";
201 reg = <0x0800000 0x1000000>;
206 reg = <0x1800000 0x6800000>;
213 ethphy0: ethernet-phy@0 {
214 device_type = "ethernet-phy";
222 phy-handle = <ðphy0>;