arch/arm/boot/dts/ls1021a.dtsi

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton64.dtsi"
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50
  51 / {
  52         compatible = "fsl,ls1021a";
  53         interrupt-parent = <&gic>;
  54
  55         aliases {
  56                 crypto = &crypto;
  57                 ethernet0 = &enet0;
  58                 ethernet1 = &enet1;
  59                 ethernet2 = &enet2;
  60                 serial0 = &lpuart0;
  61                 serial1 = &lpuart1;
  62                 serial2 = &lpuart2;
  63                 serial3 = &lpuart3;
  64                 serial4 = &lpuart4;
  65                 serial5 = &lpuart5;
  66                 sysclk = &sysclk;
  67         };
  68
  69         cpus {
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72
  73                 cpu@f00 {
  74                         compatible = "arm,cortex-a7";
  75                         device_type = "cpu";
  76                         reg = <0xf00>;
  77                         clocks = <&cluster1_clk>;
  78                 };
  79
  80                 cpu@f01 {
  81                         compatible = "arm,cortex-a7";
  82                         device_type = "cpu";
  83                         reg = <0xf01>;
  84                         clocks = <&cluster1_clk>;
  85                 };
  86         };
  87
  88         timer {
  89                 compatible = "arm,armv7-timer";
  90                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  91                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  92                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  93                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  94         };
  95
  96         pmu {
  97                 compatible = "arm,cortex-a7-pmu";
  98                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
  99                              <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 100         };
 101
 102         soc {
 103                 compatible = "simple-bus";
 104                 #address-cells = <2>;
 105                 #size-cells = <2>;
 106                 device_type = "soc";
 107                 interrupt-parent = <&gic>;
 108                 ranges;
 109
 110                 gic: interrupt-controller@1400000 {
 111                         compatible = "arm,cortex-a7-gic";
 112                         #interrupt-cells = <3>;
 113                         interrupt-controller;
 114                         reg = <0x0 0x1401000 0x0 0x1000>,
 115                               <0x0 0x1402000 0x0 0x1000>,
 116                               <0x0 0x1404000 0x0 0x2000>,
 117                               <0x0 0x1406000 0x0 0x2000>;
 118                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 119
 120                 };
 121
 122                 ifc: ifc@1530000 {
 123                         compatible = "fsl,ifc", "simple-bus";
 124                         reg = <0x0 0x1530000 0x0 0x10000>;
 125                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 126                 };
 127
 128                 dcfg: dcfg@1ee0000 {
 129                         compatible = "fsl,ls1021a-dcfg", "syscon";
 130                         reg = <0x0 0x1ee0000 0x0 0x10000>;
 131                         big-endian;
 132                 };
 133
 134                 esdhc: esdhc@1560000 {
 135                         compatible = "fsl,esdhc";
 136                         reg = <0x0 0x1560000 0x0 0x10000>;
 137                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 138                         clock-frequency = <0>;
 139                         voltage-ranges = <1800 1800 3300 3300>;
 140                         sdhci,auto-cmd12;
 141                         big-endian;
 142                         bus-width = <4>;
 143                         status = "disabled";
 144                 };
 145
 146                 sata: sata@3200000 {
 147                         compatible = "fsl,ls1021a-ahci";
 148                         reg = <0x0 0x3200000 0x0 0x10000>,
 149                               <0x0 0x20220520 0x0 0x4>;
 150                         reg-names = "ahci", "sata-ecc";
 151                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 152                         clocks = <&platform_clk 1>;
 153                         dma-coherent;
 154                         status = "disabled";
 155                 };
 156
 157                 scfg: scfg@1570000 {
 158                         compatible = "fsl,ls1021a-scfg", "syscon";
 159                         reg = <0x0 0x1570000 0x0 0x10000>;
 160                         big-endian;
 161                 };
 162
 163                 crypto: crypto@1700000 {
 164                         compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 165                         fsl,sec-era = <7>;
 166                         #address-cells = <1>;
 167                         #size-cells = <1>;
 168                         reg              = <0x0 0x1700000 0x0 0x100000>;
 169                         ranges           = <0x0 0x0 0x1700000 0x100000>;
 170                         interrupts       = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 171
 172                         sec_jr0: jr@10000 {
 173                                 compatible = "fsl,sec-v5.0-job-ring",
 174                                      "fsl,sec-v4.0-job-ring";
 175                                 reg = <0x10000 0x10000>;
 176                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 177                         };
 178
 179                         sec_jr1: jr@20000 {
 180                                 compatible = "fsl,sec-v5.0-job-ring",
 181                                      "fsl,sec-v4.0-job-ring";
 182                                 reg = <0x20000 0x10000>;
 183                                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 184                         };
 185
 186                         sec_jr2: jr@30000 {
 187                                 compatible = "fsl,sec-v5.0-job-ring",
 188                                      "fsl,sec-v4.0-job-ring";
 189                                 reg = <0x30000 0x10000>;
 190                                 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 191                         };
 192
 193                         sec_jr3: jr@40000 {
 194                                 compatible = "fsl,sec-v5.0-job-ring",
 195                                      "fsl,sec-v4.0-job-ring";
 196                                 reg = <0x40000 0x10000>;
 197                                 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 198                         };
 199
 200                 };
 201
 202                 clockgen: clocking@1ee1000 {
 203                         #address-cells = <1>;
 204                         #size-cells = <1>;
 205                         ranges = <0x0 0x0 0x1ee1000 0x10000>;
 206
 207                         sysclk: sysclk {
 208                                 compatible = "fixed-clock";
 209                                 #clock-cells = <0>;
 210                                 clock-output-names = "sysclk";
 211                         };
 212
 213                         cga_pll1: pll@800 {
 214                                 compatible = "fsl,qoriq-core-pll-2.0";
 215                                 #clock-cells = <1>;
 216                                 reg = <0x800 0x10>;
 217                                 clocks = <&sysclk>;
 218                                 clock-output-names = "cga-pll1", "cga-pll1-div2",
 219                                                      "cga-pll1-div4";
 220                         };
 221
 222                         platform_clk: pll@c00 {
 223                                 compatible = "fsl,qoriq-core-pll-2.0";
 224                                 #clock-cells = <1>;
 225                                 reg = <0xc00 0x10>;
 226                                 clocks = <&sysclk>;
 227                                 clock-output-names = "platform-clk", "platform-clk-div2";
 228                         };
 229
 230                         cluster1_clk: clk0c0@0 {
 231                                 compatible = "fsl,qoriq-core-mux-2.0";
 232                                 #clock-cells = <0>;
 233                                 reg = <0x0 0x10>;
 234                                 clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
 235                                 clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
 236                                 clock-output-names = "cluster1-clk";
 237                         };
 238                 };
 239
 240                 dspi0: dspi@2100000 {
 241                         compatible = "fsl,ls1021a-v1.0-dspi";
 242                         #address-cells = <1>;
 243                         #size-cells = <0>;
 244                         reg = <0x0 0x2100000 0x0 0x10000>;
 245                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 246                         clock-names = "dspi";
 247                         clocks = <&platform_clk 1>;
 248                         spi-num-chipselects = <5>;
 249                         big-endian;
 250                         status = "disabled";
 251                 };
 252
 253                 dspi1: dspi@2110000 {
 254                         compatible = "fsl,ls1021a-v1.0-dspi";
 255                         #address-cells = <1>;
 256                         #size-cells = <0>;
 257                         reg = <0x0 0x2110000 0x0 0x10000>;
 258                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 259                         clock-names = "dspi";
 260                         clocks = <&platform_clk 1>;
 261                         spi-num-chipselects = <5>;
 262                         big-endian;
 263                         status = "disabled";
 264                 };
 265
 266                 i2c0: i2c@2180000 {
 267                         compatible = "fsl,vf610-i2c";
 268                         #address-cells = <1>;
 269                         #size-cells = <0>;
 270                         reg = <0x0 0x2180000 0x0 0x10000>;
 271                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 272                         clock-names = "i2c";
 273                         clocks = <&platform_clk 1>;
 274                         status = "disabled";
 275                 };
 276
 277                 i2c1: i2c@2190000 {
 278                         compatible = "fsl,vf610-i2c";
 279                         #address-cells = <1>;
 280                         #size-cells = <0>;
 281                         reg = <0x0 0x2190000 0x0 0x10000>;
 282                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 283                         clock-names = "i2c";
 284                         clocks = <&platform_clk 1>;
 285                         status = "disabled";
 286                 };
 287
 288                 i2c2: i2c@21a0000 {
 289                         compatible = "fsl,vf610-i2c";
 290                         #address-cells = <1>;
 291                         #size-cells = <0>;
 292                         reg = <0x0 0x21a0000 0x0 0x10000>;
 293                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 294                         clock-names = "i2c";
 295                         clocks = <&platform_clk 1>;
 296                         status = "disabled";
 297                 };
 298
 299                 uart0: serial@21c0500 {
 300                         compatible = "fsl,16550-FIFO64", "ns16550a";
 301                         reg = <0x0 0x21c0500 0x0 0x100>;
 302                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 303                         clock-frequency = <0>;
 304                         fifo-size = <15>;
 305                         status = "disabled";
 306                 };
 307
 308                 uart1: serial@21c0600 {
 309                         compatible = "fsl,16550-FIFO64", "ns16550a";
 310                         reg = <0x0 0x21c0600 0x0 0x100>;
 311                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 312                         clock-frequency = <0>;
 313                         fifo-size = <15>;
 314                         status = "disabled";
 315                 };
 316
 317                 uart2: serial@21d0500 {
 318                         compatible = "fsl,16550-FIFO64", "ns16550a";
 319                         reg = <0x0 0x21d0500 0x0 0x100>;
 320                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 321                         clock-frequency = <0>;
 322                         fifo-size = <15>;
 323                         status = "disabled";
 324                 };
 325
 326                 uart3: serial@21d0600 {
 327                         compatible = "fsl,16550-FIFO64", "ns16550a";
 328                         reg = <0x0 0x21d0600 0x0 0x100>;
 329                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 330                         clock-frequency = <0>;
 331                         fifo-size = <15>;
 332                         status = "disabled";
 333                 };
 334
 335                 lpuart0: serial@2950000 {
 336                         compatible = "fsl,ls1021a-lpuart";
 337                         reg = <0x0 0x2950000 0x0 0x1000>;
 338                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 339                         clocks = <&sysclk>;
 340                         clock-names = "ipg";
 341                         status = "disabled";
 342                 };
 343
 344                 lpuart1: serial@2960000 {
 345                         compatible = "fsl,ls1021a-lpuart";
 346                         reg = <0x0 0x2960000 0x0 0x1000>;
 347                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 348                         clocks = <&platform_clk 1>;
 349                         clock-names = "ipg";
 350                         status = "disabled";
 351                 };
 352
 353                 lpuart2: serial@2970000 {
 354                         compatible = "fsl,ls1021a-lpuart";
 355                         reg = <0x0 0x2970000 0x0 0x1000>;
 356                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 357                         clocks = <&platform_clk 1>;
 358                         clock-names = "ipg";
 359                         status = "disabled";
 360                 };
 361
 362                 lpuart3: serial@2980000 {
 363                         compatible = "fsl,ls1021a-lpuart";
 364                         reg = <0x0 0x2980000 0x0 0x1000>;
 365                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 366                         clocks = <&platform_clk 1>;
 367                         clock-names = "ipg";
 368                         status = "disabled";
 369                 };
 370
 371                 lpuart4: serial@2990000 {
 372                         compatible = "fsl,ls1021a-lpuart";
 373                         reg = <0x0 0x2990000 0x0 0x1000>;
 374                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 375                         clocks = <&platform_clk 1>;
 376                         clock-names = "ipg";
 377                         status = "disabled";
 378                 };
 379
 380                 lpuart5: serial@29a0000 {
 381                         compatible = "fsl,ls1021a-lpuart";
 382                         reg = <0x0 0x29a0000 0x0 0x1000>;
 383                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 384                         clocks = <&platform_clk 1>;
 385                         clock-names = "ipg";
 386                         status = "disabled";
 387                 };
 388
 389                 wdog0: watchdog@2ad0000 {
 390                         compatible = "fsl,imx21-wdt";
 391                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 392                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 393                         clocks = <&platform_clk 1>;
 394                         clock-names = "wdog-en";
 395                         big-endian;
 396                 };
 397
 398                 sai1: sai@2b50000 {
 399                         #sound-dai-cells = <0>;
 400                         compatible = "fsl,vf610-sai";
 401                         reg = <0x0 0x2b50000 0x0 0x10000>;
 402                         interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 403                         clocks = <&platform_clk 1>, <&platform_clk 1>,
 404                                  <&platform_clk 1>, <&platform_clk 1>;
 405                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 406                         dma-names = "tx", "rx";
 407                         dmas = <&edma0 1 47>,
 408                                <&edma0 1 46>;
 409                         status = "disabled";
 410                 };
 411
 412                 sai2: sai@2b60000 {
 413                         #sound-dai-cells = <0>;
 414                         compatible = "fsl,vf610-sai";
 415                         reg = <0x0 0x2b60000 0x0 0x10000>;
 416                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 417                         clocks = <&platform_clk 1>, <&platform_clk 1>,
 418                                  <&platform_clk 1>, <&platform_clk 1>;
 419                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 420                         dma-names = "tx", "rx";
 421                         dmas = <&edma0 1 45>,
 422                                <&edma0 1 44>;
 423                         status = "disabled";
 424                 };
 425
 426                 edma0: edma@2c00000 {
 427                         #dma-cells = <2>;
 428                         compatible = "fsl,vf610-edma";
 429                         reg = <0x0 0x2c00000 0x0 0x10000>,
 430                               <0x0 0x2c10000 0x0 0x10000>,
 431                               <0x0 0x2c20000 0x0 0x10000>;
 432                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 433                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 434                         interrupt-names = "edma-tx", "edma-err";
 435                         dma-channels = <32>;
 436                         big-endian;
 437                         clock-names = "dmamux0", "dmamux1";
 438                         clocks = <&platform_clk 1>,
 439                                  <&platform_clk 1>;
 440                 };
 441
 442                 dcu: dcu@2ce0000 {
 443                         compatible = "fsl,ls1021a-dcu";
 444                         reg = <0x0 0x2ce0000 0x0 0x10000>;
 445                         interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 446                         clocks = <&platform_clk 0>;
 447                         clock-names = "dcu";
 448                         big-endian;
 449                         status = "disabled";
 450                 };
 451
 452                 mdio0: mdio@2d24000 {
 453                         compatible = "gianfar";
 454                         device_type = "mdio";
 455                         #address-cells = <1>;
 456                         #size-cells = <0>;
 457                         reg = <0x0 0x2d24000 0x0 0x4000>;
 458                 };
 459
 460                 ptp_clock@2d10e00 {
 461                         compatible = "fsl,etsec-ptp";
 462                         reg = <0x0 0x2d10e00 0x0 0xb0>;
 463                         interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 464                         fsl,tclk-period = <5>;
 465                         fsl,tmr-prsc    = <2>;
 466                         fsl,tmr-add     = <0xaaaaaaab>;
 467                         fsl,tmr-fiper1  = <999999990>;
 468                         fsl,tmr-fiper2  = <99990>;
 469                         fsl,max-adj     = <499999999>;
 470                 };
 471
 472                 enet0: ethernet@2d10000 {
 473                         compatible = "fsl,etsec2";
 474                         device_type = "network";
 475                         #address-cells = <2>;
 476                         #size-cells = <2>;
 477                         interrupt-parent = <&gic>;
 478                         model = "eTSEC";
 479                         fsl,magic-packet;
 480                         ranges;
 481                         dma-coherent;
 482
 483                         queue-group@2d10000 {
 484                                 #address-cells = <2>;
 485                                 #size-cells = <2>;
 486                                 reg = <0x0 0x2d10000 0x0 0x1000>;
 487                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 488                                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 489                                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 490                         };
 491
 492                         queue-group@2d14000  {
 493                                 #address-cells = <2>;
 494                                 #size-cells = <2>;
 495                                 reg = <0x0 0x2d14000 0x0 0x1000>;
 496                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 497                                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 498                                         <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 499                         };
 500                 };
 501
 502                 enet1: ethernet@2d50000 {
 503                         compatible = "fsl,etsec2";
 504                         device_type = "network";
 505                         #address-cells = <2>;
 506                         #size-cells = <2>;
 507                         interrupt-parent = <&gic>;
 508                         model = "eTSEC";
 509                         ranges;
 510                         dma-coherent;
 511
 512                         queue-group@2d50000  {
 513                                 #address-cells = <2>;
 514                                 #size-cells = <2>;
 515                                 reg = <0x0 0x2d50000 0x0 0x1000>;
 516                                 interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 517                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 518                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 519                         };
 520
 521                         queue-group@2d54000  {
 522                                 #address-cells = <2>;
 523                                 #size-cells = <2>;
 524                                 reg = <0x0 0x2d54000 0x0 0x1000>;
 525                                 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 526                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
 527                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 528                         };
 529                 };
 530
 531                 enet2: ethernet@2d90000 {
 532                         compatible = "fsl,etsec2";
 533                         device_type = "network";
 534                         #address-cells = <2>;
 535                         #size-cells = <2>;
 536                         interrupt-parent = <&gic>;
 537                         model = "eTSEC";
 538                         ranges;
 539                         dma-coherent;
 540
 541                         queue-group@2d90000  {
 542                                 #address-cells = <2>;
 543                                 #size-cells = <2>;
 544                                 reg = <0x0 0x2d90000 0x0 0x1000>;
 545                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 546                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 547                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 548                         };
 549
 550                         queue-group@2d94000  {
 551                                 #address-cells = <2>;
 552                                 #size-cells = <2>;
 553                                 reg = <0x0 0x2d94000 0x0 0x1000>;
 554                                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 555                                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 556                                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 557                         };
 558                 };
 559
 560                 usb@8600000 {
 561                         compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 562                         reg = <0x0 0x8600000 0x0 0x1000>;
 563                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 564                         dr_mode = "host";
 565                         phy_type = "ulpi";
 566                 };
 567
 568                 usb3@3100000 {
 569                         compatible = "snps,dwc3";
 570                         reg = <0x0 0x3100000 0x0 0x10000>;
 571                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 572                         dr_mode = "host";
 573                         snps,quirk-frame-length-adjustment = <0x20>;
 574                 };
 575
 576                 pcie@3400000 {
 577                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 578                         reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 579                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 580                         reg-names = "regs", "config";
 581                         interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 582                         fsl,pcie-scfg = <&scfg 0>;
 583                         #address-cells = <3>;
 584                         #size-cells = <2>;
 585                         device_type = "pci";
 586                         num-lanes = <4>;
 587                         bus-range = <0x0 0xff>;
 588                         ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 589                                   0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 590                         #interrupt-cells = <1>;
 591                         interrupt-map-mask = <0 0 0 7>;
 592                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
 593                                         <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
 594                                         <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
 595                                         <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 596                 };
 597
 598                 pcie@3500000 {
 599                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 600                         reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 601                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 602                         reg-names = "regs", "config";
 603                         interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 604                         fsl,pcie-scfg = <&scfg 1>;
 605                         #address-cells = <3>;
 606                         #size-cells = <2>;
 607                         device_type = "pci";
 608                         num-lanes = <4>;
 609                         bus-range = <0x0 0xff>;
 610                         ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 611                                   0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 612                         #interrupt-cells = <1>;
 613                         interrupt-map-mask = <0 0 0 7>;
 614                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
 615                                         <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
 616                                         <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 617                                         <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 618                 };
 619         };
 620 };